perf python: Do not force closing original perf descriptor in evlist.get_pollfd()
[linux/fpc-iii.git] / drivers / usb / renesas_usbhs / pipe.c
blobc4922b96c93bcec16e3b60010eed556306914d6c
1 // SPDX-License-Identifier: GPL-1.0+
2 /*
3 * Renesas USB driver
5 * Copyright (C) 2011 Renesas Solutions Corp.
6 * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
7 */
8 #include <linux/delay.h>
9 #include <linux/slab.h>
10 #include "common.h"
11 #include "pipe.h"
14 * macros
16 #define usbhsp_addr_offset(p) ((usbhs_pipe_number(p) - 1) * 2)
18 #define usbhsp_flags_set(p, f) ((p)->flags |= USBHS_PIPE_FLAGS_##f)
19 #define usbhsp_flags_clr(p, f) ((p)->flags &= ~USBHS_PIPE_FLAGS_##f)
20 #define usbhsp_flags_has(p, f) ((p)->flags & USBHS_PIPE_FLAGS_##f)
21 #define usbhsp_flags_init(p) do {(p)->flags = 0; } while (0)
24 * for debug
26 static char *usbhsp_pipe_name[] = {
27 [USB_ENDPOINT_XFER_CONTROL] = "DCP",
28 [USB_ENDPOINT_XFER_BULK] = "BULK",
29 [USB_ENDPOINT_XFER_INT] = "INT",
30 [USB_ENDPOINT_XFER_ISOC] = "ISO",
33 char *usbhs_pipe_name(struct usbhs_pipe *pipe)
35 return usbhsp_pipe_name[usbhs_pipe_type(pipe)];
38 static struct renesas_usbhs_driver_pipe_config
39 *usbhsp_get_pipe_config(struct usbhs_priv *priv, int pipe_num)
41 struct renesas_usbhs_driver_pipe_config *pipe_configs =
42 usbhs_get_dparam(priv, pipe_configs);
44 return &pipe_configs[pipe_num];
48 * DCPCTR/PIPEnCTR functions
50 static void usbhsp_pipectrl_set(struct usbhs_pipe *pipe, u16 mask, u16 val)
52 struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
53 int offset = usbhsp_addr_offset(pipe);
55 if (usbhs_pipe_is_dcp(pipe))
56 usbhs_bset(priv, DCPCTR, mask, val);
57 else
58 usbhs_bset(priv, PIPEnCTR + offset, mask, val);
61 static u16 usbhsp_pipectrl_get(struct usbhs_pipe *pipe)
63 struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
64 int offset = usbhsp_addr_offset(pipe);
66 if (usbhs_pipe_is_dcp(pipe))
67 return usbhs_read(priv, DCPCTR);
68 else
69 return usbhs_read(priv, PIPEnCTR + offset);
73 * DCP/PIPE functions
75 static void __usbhsp_pipe_xxx_set(struct usbhs_pipe *pipe,
76 u16 dcp_reg, u16 pipe_reg,
77 u16 mask, u16 val)
79 struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
81 if (usbhs_pipe_is_dcp(pipe))
82 usbhs_bset(priv, dcp_reg, mask, val);
83 else
84 usbhs_bset(priv, pipe_reg, mask, val);
87 static u16 __usbhsp_pipe_xxx_get(struct usbhs_pipe *pipe,
88 u16 dcp_reg, u16 pipe_reg)
90 struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
92 if (usbhs_pipe_is_dcp(pipe))
93 return usbhs_read(priv, dcp_reg);
94 else
95 return usbhs_read(priv, pipe_reg);
99 * DCPCFG/PIPECFG functions
101 static void usbhsp_pipe_cfg_set(struct usbhs_pipe *pipe, u16 mask, u16 val)
103 __usbhsp_pipe_xxx_set(pipe, DCPCFG, PIPECFG, mask, val);
106 static u16 usbhsp_pipe_cfg_get(struct usbhs_pipe *pipe)
108 return __usbhsp_pipe_xxx_get(pipe, DCPCFG, PIPECFG);
112 * PIPEnTRN/PIPEnTRE functions
114 static void usbhsp_pipe_trn_set(struct usbhs_pipe *pipe, u16 mask, u16 val)
116 struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
117 struct device *dev = usbhs_priv_to_dev(priv);
118 int num = usbhs_pipe_number(pipe);
119 u16 reg;
122 * It is impossible to calculate address,
123 * since PIPEnTRN addresses were mapped randomly.
125 #define CASE_PIPExTRN(a) \
126 case 0x ## a: \
127 reg = PIPE ## a ## TRN; \
128 break;
130 switch (num) {
131 CASE_PIPExTRN(1);
132 CASE_PIPExTRN(2);
133 CASE_PIPExTRN(3);
134 CASE_PIPExTRN(4);
135 CASE_PIPExTRN(5);
136 CASE_PIPExTRN(B);
137 CASE_PIPExTRN(C);
138 CASE_PIPExTRN(D);
139 CASE_PIPExTRN(E);
140 CASE_PIPExTRN(F);
141 CASE_PIPExTRN(9);
142 CASE_PIPExTRN(A);
143 default:
144 dev_err(dev, "unknown pipe (%d)\n", num);
145 return;
147 __usbhsp_pipe_xxx_set(pipe, 0, reg, mask, val);
150 static void usbhsp_pipe_tre_set(struct usbhs_pipe *pipe, u16 mask, u16 val)
152 struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
153 struct device *dev = usbhs_priv_to_dev(priv);
154 int num = usbhs_pipe_number(pipe);
155 u16 reg;
158 * It is impossible to calculate address,
159 * since PIPEnTRE addresses were mapped randomly.
161 #define CASE_PIPExTRE(a) \
162 case 0x ## a: \
163 reg = PIPE ## a ## TRE; \
164 break;
166 switch (num) {
167 CASE_PIPExTRE(1);
168 CASE_PIPExTRE(2);
169 CASE_PIPExTRE(3);
170 CASE_PIPExTRE(4);
171 CASE_PIPExTRE(5);
172 CASE_PIPExTRE(B);
173 CASE_PIPExTRE(C);
174 CASE_PIPExTRE(D);
175 CASE_PIPExTRE(E);
176 CASE_PIPExTRE(F);
177 CASE_PIPExTRE(9);
178 CASE_PIPExTRE(A);
179 default:
180 dev_err(dev, "unknown pipe (%d)\n", num);
181 return;
184 __usbhsp_pipe_xxx_set(pipe, 0, reg, mask, val);
188 * PIPEBUF
190 static void usbhsp_pipe_buf_set(struct usbhs_pipe *pipe, u16 mask, u16 val)
192 if (usbhs_pipe_is_dcp(pipe))
193 return;
195 __usbhsp_pipe_xxx_set(pipe, 0, PIPEBUF, mask, val);
199 * DCPMAXP/PIPEMAXP
201 static void usbhsp_pipe_maxp_set(struct usbhs_pipe *pipe, u16 mask, u16 val)
203 __usbhsp_pipe_xxx_set(pipe, DCPMAXP, PIPEMAXP, mask, val);
207 * pipe control functions
209 static void usbhsp_pipe_select(struct usbhs_pipe *pipe)
211 struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
214 * On pipe, this is necessary before
215 * accesses to below registers.
217 * PIPESEL : usbhsp_pipe_select
218 * PIPECFG : usbhsp_pipe_cfg_xxx
219 * PIPEBUF : usbhsp_pipe_buf_xxx
220 * PIPEMAXP : usbhsp_pipe_maxp_xxx
221 * PIPEPERI
225 * if pipe is dcp, no pipe is selected.
226 * it is no problem, because dcp have its register
228 usbhs_write(priv, PIPESEL, 0xF & usbhs_pipe_number(pipe));
231 static int usbhsp_pipe_barrier(struct usbhs_pipe *pipe)
233 struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
234 int timeout = 1024;
235 u16 mask = usbhs_mod_is_host(priv) ? (CSSTS | PID_MASK) : PID_MASK;
238 * make sure....
240 * Modify these bits when CSSTS = 0, PID = NAK, and no pipe number is
241 * specified by the CURPIPE bits.
242 * When changing the setting of this bit after changing
243 * the PID bits for the selected pipe from BUF to NAK,
244 * check that CSSTS = 0 and PBUSY = 0.
248 * CURPIPE bit = 0
250 * see also
251 * "Operation"
252 * - "Pipe Control"
253 * - "Pipe Control Registers Switching Procedure"
255 usbhs_write(priv, CFIFOSEL, 0);
256 usbhs_pipe_disable(pipe);
258 do {
259 if (!(usbhsp_pipectrl_get(pipe) & mask))
260 return 0;
262 udelay(10);
264 } while (timeout--);
266 return -EBUSY;
269 int usbhs_pipe_is_accessible(struct usbhs_pipe *pipe)
271 u16 val;
273 val = usbhsp_pipectrl_get(pipe);
274 if (val & BSTS)
275 return 0;
277 return -EBUSY;
281 * PID ctrl
283 static void __usbhsp_pid_try_nak_if_stall(struct usbhs_pipe *pipe)
285 u16 pid = usbhsp_pipectrl_get(pipe);
287 pid &= PID_MASK;
290 * see
291 * "Pipe n Control Register" - "PID"
293 switch (pid) {
294 case PID_STALL11:
295 usbhsp_pipectrl_set(pipe, PID_MASK, PID_STALL10);
296 /* fall-through */
297 case PID_STALL10:
298 usbhsp_pipectrl_set(pipe, PID_MASK, PID_NAK);
302 void usbhs_pipe_disable(struct usbhs_pipe *pipe)
304 int timeout = 1024;
305 u16 val;
307 /* see "Pipe n Control Register" - "PID" */
308 __usbhsp_pid_try_nak_if_stall(pipe);
310 usbhsp_pipectrl_set(pipe, PID_MASK, PID_NAK);
312 do {
313 val = usbhsp_pipectrl_get(pipe);
314 val &= PBUSY;
315 if (!val)
316 break;
318 udelay(10);
319 } while (timeout--);
322 void usbhs_pipe_enable(struct usbhs_pipe *pipe)
324 /* see "Pipe n Control Register" - "PID" */
325 __usbhsp_pid_try_nak_if_stall(pipe);
327 usbhsp_pipectrl_set(pipe, PID_MASK, PID_BUF);
330 void usbhs_pipe_stall(struct usbhs_pipe *pipe)
332 u16 pid = usbhsp_pipectrl_get(pipe);
334 pid &= PID_MASK;
337 * see
338 * "Pipe n Control Register" - "PID"
340 switch (pid) {
341 case PID_NAK:
342 usbhsp_pipectrl_set(pipe, PID_MASK, PID_STALL10);
343 break;
344 case PID_BUF:
345 usbhsp_pipectrl_set(pipe, PID_MASK, PID_STALL11);
346 break;
350 int usbhs_pipe_is_stall(struct usbhs_pipe *pipe)
352 u16 pid = usbhsp_pipectrl_get(pipe) & PID_MASK;
354 return (int)(pid == PID_STALL10 || pid == PID_STALL11);
357 void usbhs_pipe_set_trans_count_if_bulk(struct usbhs_pipe *pipe, int len)
359 if (!usbhs_pipe_type_is(pipe, USB_ENDPOINT_XFER_BULK))
360 return;
363 * clear and disable transfer counter for IN/OUT pipe
365 usbhsp_pipe_tre_set(pipe, TRCLR | TRENB, TRCLR);
368 * Only IN direction bulk pipe can use transfer count.
369 * Without using this function,
370 * received data will break if it was large data size.
371 * see PIPEnTRN/PIPEnTRE for detail
373 if (usbhs_pipe_is_dir_in(pipe)) {
374 int maxp = usbhs_pipe_get_maxpacket(pipe);
376 usbhsp_pipe_trn_set(pipe, 0xffff, DIV_ROUND_UP(len, maxp));
377 usbhsp_pipe_tre_set(pipe, TRENB, TRENB); /* enable */
383 * pipe setup
385 static int usbhsp_setup_pipecfg(struct usbhs_pipe *pipe, int is_host,
386 int dir_in, u16 *pipecfg)
388 u16 type = 0;
389 u16 bfre = 0;
390 u16 dblb = 0;
391 u16 cntmd = 0;
392 u16 dir = 0;
393 u16 epnum = 0;
394 u16 shtnak = 0;
395 static const u16 type_array[] = {
396 [USB_ENDPOINT_XFER_BULK] = TYPE_BULK,
397 [USB_ENDPOINT_XFER_INT] = TYPE_INT,
398 [USB_ENDPOINT_XFER_ISOC] = TYPE_ISO,
401 if (usbhs_pipe_is_dcp(pipe))
402 return -EINVAL;
405 * PIPECFG
407 * see
408 * - "Register Descriptions" - "PIPECFG" register
409 * - "Features" - "Pipe configuration"
410 * - "Operation" - "Pipe Control"
413 /* TYPE */
414 type = type_array[usbhs_pipe_type(pipe)];
416 /* BFRE */
417 if (usbhs_pipe_type_is(pipe, USB_ENDPOINT_XFER_ISOC) ||
418 usbhs_pipe_type_is(pipe, USB_ENDPOINT_XFER_BULK))
419 bfre = 0; /* FIXME */
421 /* DBLB: see usbhs_pipe_config_update() */
423 /* CNTMD */
424 if (usbhs_pipe_type_is(pipe, USB_ENDPOINT_XFER_BULK))
425 cntmd = 0; /* FIXME */
427 /* DIR */
428 if (dir_in)
429 usbhsp_flags_set(pipe, IS_DIR_HOST);
431 if (!!is_host ^ !!dir_in)
432 dir |= DIR_OUT;
434 if (!dir)
435 usbhsp_flags_set(pipe, IS_DIR_IN);
437 /* SHTNAK */
438 if (usbhs_pipe_type_is(pipe, USB_ENDPOINT_XFER_BULK) &&
439 !dir)
440 shtnak = SHTNAK;
442 /* EPNUM */
443 epnum = 0; /* see usbhs_pipe_config_update() */
444 *pipecfg = type |
445 bfre |
446 dblb |
447 cntmd |
448 dir |
449 shtnak |
450 epnum;
451 return 0;
454 static u16 usbhsp_setup_pipebuff(struct usbhs_pipe *pipe)
456 struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
457 struct device *dev = usbhs_priv_to_dev(priv);
458 int pipe_num = usbhs_pipe_number(pipe);
459 u16 buff_size;
460 u16 bufnmb;
461 u16 bufnmb_cnt;
462 struct renesas_usbhs_driver_pipe_config *pipe_config =
463 usbhsp_get_pipe_config(priv, pipe_num);
466 * PIPEBUF
468 * see
469 * - "Register Descriptions" - "PIPEBUF" register
470 * - "Features" - "Pipe configuration"
471 * - "Operation" - "FIFO Buffer Memory"
472 * - "Operation" - "Pipe Control"
474 buff_size = pipe_config->bufsize;
475 bufnmb = pipe_config->bufnum;
477 /* change buff_size to register value */
478 bufnmb_cnt = (buff_size / 64) - 1;
480 dev_dbg(dev, "pipe : %d : buff_size 0x%x: bufnmb 0x%x\n",
481 pipe_num, buff_size, bufnmb);
483 return (0x1f & bufnmb_cnt) << 10 |
484 (0xff & bufnmb) << 0;
487 void usbhs_pipe_config_update(struct usbhs_pipe *pipe, u16 devsel,
488 u16 epnum, u16 maxp)
490 struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
491 int pipe_num = usbhs_pipe_number(pipe);
492 struct renesas_usbhs_driver_pipe_config *pipe_config =
493 usbhsp_get_pipe_config(priv, pipe_num);
494 u16 dblb = pipe_config->double_buf ? DBLB : 0;
496 if (devsel > 0xA) {
497 struct device *dev = usbhs_priv_to_dev(priv);
499 dev_err(dev, "devsel error %d\n", devsel);
501 devsel = 0;
504 usbhsp_pipe_barrier(pipe);
506 pipe->maxp = maxp;
508 usbhsp_pipe_select(pipe);
509 usbhsp_pipe_maxp_set(pipe, 0xFFFF,
510 (devsel << 12) |
511 maxp);
513 if (!usbhs_pipe_is_dcp(pipe))
514 usbhsp_pipe_cfg_set(pipe, 0x000F | DBLB, epnum | dblb);
518 * pipe control
520 int usbhs_pipe_get_maxpacket(struct usbhs_pipe *pipe)
523 * see
524 * usbhs_pipe_config_update()
525 * usbhs_dcp_malloc()
527 return pipe->maxp;
530 int usbhs_pipe_is_dir_in(struct usbhs_pipe *pipe)
532 return usbhsp_flags_has(pipe, IS_DIR_IN);
535 int usbhs_pipe_is_dir_host(struct usbhs_pipe *pipe)
537 return usbhsp_flags_has(pipe, IS_DIR_HOST);
540 int usbhs_pipe_is_running(struct usbhs_pipe *pipe)
542 return usbhsp_flags_has(pipe, IS_RUNNING);
545 void usbhs_pipe_running(struct usbhs_pipe *pipe, int running)
547 if (running)
548 usbhsp_flags_set(pipe, IS_RUNNING);
549 else
550 usbhsp_flags_clr(pipe, IS_RUNNING);
553 void usbhs_pipe_data_sequence(struct usbhs_pipe *pipe, int sequence)
555 u16 mask = (SQCLR | SQSET);
556 u16 val;
559 * sequence
560 * 0 : data0
561 * 1 : data1
562 * -1 : no change
564 switch (sequence) {
565 case 0:
566 val = SQCLR;
567 break;
568 case 1:
569 val = SQSET;
570 break;
571 default:
572 return;
575 usbhsp_pipectrl_set(pipe, mask, val);
578 static int usbhs_pipe_get_data_sequence(struct usbhs_pipe *pipe)
580 return !!(usbhsp_pipectrl_get(pipe) & SQMON);
583 void usbhs_pipe_clear(struct usbhs_pipe *pipe)
585 if (usbhs_pipe_is_dcp(pipe)) {
586 usbhs_fifo_clear_dcp(pipe);
587 } else {
588 usbhsp_pipectrl_set(pipe, ACLRM, ACLRM);
589 usbhsp_pipectrl_set(pipe, ACLRM, 0);
593 /* Should call usbhsp_pipe_select() before */
594 void usbhs_pipe_clear_without_sequence(struct usbhs_pipe *pipe,
595 int needs_bfre, int bfre_enable)
597 int sequence;
599 usbhsp_pipe_select(pipe);
600 sequence = usbhs_pipe_get_data_sequence(pipe);
601 if (needs_bfre)
602 usbhsp_pipe_cfg_set(pipe, BFRE, bfre_enable ? BFRE : 0);
603 usbhs_pipe_clear(pipe);
604 usbhs_pipe_data_sequence(pipe, sequence);
607 void usbhs_pipe_config_change_bfre(struct usbhs_pipe *pipe, int enable)
609 if (usbhs_pipe_is_dcp(pipe))
610 return;
612 usbhsp_pipe_select(pipe);
613 /* check if the driver needs to change the BFRE value */
614 if (!(enable ^ !!(usbhsp_pipe_cfg_get(pipe) & BFRE)))
615 return;
617 usbhs_pipe_clear_without_sequence(pipe, 1, enable);
620 static struct usbhs_pipe *usbhsp_get_pipe(struct usbhs_priv *priv, u32 type)
622 struct usbhs_pipe *pos, *pipe;
623 int i;
626 * find target pipe
628 pipe = NULL;
629 usbhs_for_each_pipe_with_dcp(pos, priv, i) {
630 if (!usbhs_pipe_type_is(pos, type))
631 continue;
632 if (usbhsp_flags_has(pos, IS_USED))
633 continue;
635 pipe = pos;
636 break;
639 if (!pipe)
640 return NULL;
643 * initialize pipe flags
645 usbhsp_flags_init(pipe);
646 usbhsp_flags_set(pipe, IS_USED);
648 return pipe;
651 static void usbhsp_put_pipe(struct usbhs_pipe *pipe)
653 usbhsp_flags_init(pipe);
656 void usbhs_pipe_init(struct usbhs_priv *priv,
657 int (*dma_map_ctrl)(struct device *dma_dev,
658 struct usbhs_pkt *pkt, int map))
660 struct usbhs_pipe_info *info = usbhs_priv_to_pipeinfo(priv);
661 struct usbhs_pipe *pipe;
662 int i;
664 usbhs_for_each_pipe_with_dcp(pipe, priv, i) {
665 usbhsp_flags_init(pipe);
666 pipe->fifo = NULL;
667 pipe->mod_private = NULL;
668 INIT_LIST_HEAD(&pipe->list);
670 /* pipe force init */
671 usbhs_pipe_clear(pipe);
674 info->dma_map_ctrl = dma_map_ctrl;
677 struct usbhs_pipe *usbhs_pipe_malloc(struct usbhs_priv *priv,
678 int endpoint_type,
679 int dir_in)
681 struct device *dev = usbhs_priv_to_dev(priv);
682 struct usbhs_pipe *pipe;
683 int is_host = usbhs_mod_is_host(priv);
684 int ret;
685 u16 pipecfg, pipebuf;
687 pipe = usbhsp_get_pipe(priv, endpoint_type);
688 if (!pipe) {
689 dev_err(dev, "can't get pipe (%s)\n",
690 usbhsp_pipe_name[endpoint_type]);
691 return NULL;
694 INIT_LIST_HEAD(&pipe->list);
696 usbhs_pipe_disable(pipe);
698 /* make sure pipe is not busy */
699 ret = usbhsp_pipe_barrier(pipe);
700 if (ret < 0) {
701 dev_err(dev, "pipe setup failed %d\n", usbhs_pipe_number(pipe));
702 return NULL;
705 if (usbhsp_setup_pipecfg(pipe, is_host, dir_in, &pipecfg)) {
706 dev_err(dev, "can't setup pipe\n");
707 return NULL;
710 pipebuf = usbhsp_setup_pipebuff(pipe);
712 usbhsp_pipe_select(pipe);
713 usbhsp_pipe_cfg_set(pipe, 0xFFFF, pipecfg);
714 usbhsp_pipe_buf_set(pipe, 0xFFFF, pipebuf);
715 usbhs_pipe_clear(pipe);
717 usbhs_pipe_sequence_data0(pipe);
719 dev_dbg(dev, "enable pipe %d : %s (%s)\n",
720 usbhs_pipe_number(pipe),
721 usbhs_pipe_name(pipe),
722 usbhs_pipe_is_dir_in(pipe) ? "in" : "out");
725 * epnum / maxp are still not set to this pipe.
726 * call usbhs_pipe_config_update() after this function !!
729 return pipe;
732 void usbhs_pipe_free(struct usbhs_pipe *pipe)
734 usbhsp_put_pipe(pipe);
737 void usbhs_pipe_select_fifo(struct usbhs_pipe *pipe, struct usbhs_fifo *fifo)
739 if (pipe->fifo)
740 pipe->fifo->pipe = NULL;
742 pipe->fifo = fifo;
744 if (fifo)
745 fifo->pipe = pipe;
750 * dcp control
752 struct usbhs_pipe *usbhs_dcp_malloc(struct usbhs_priv *priv)
754 struct usbhs_pipe *pipe;
756 pipe = usbhsp_get_pipe(priv, USB_ENDPOINT_XFER_CONTROL);
757 if (!pipe)
758 return NULL;
760 INIT_LIST_HEAD(&pipe->list);
763 * call usbhs_pipe_config_update() after this function !!
766 return pipe;
769 void usbhs_dcp_control_transfer_done(struct usbhs_pipe *pipe)
771 struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
773 WARN_ON(!usbhs_pipe_is_dcp(pipe));
775 usbhs_pipe_enable(pipe);
777 if (!usbhs_mod_is_host(priv)) /* funconly */
778 usbhsp_pipectrl_set(pipe, CCPL, CCPL);
781 void usbhs_dcp_dir_for_host(struct usbhs_pipe *pipe, int dir_out)
783 usbhsp_pipe_cfg_set(pipe, DIR_OUT,
784 dir_out ? DIR_OUT : 0);
788 * pipe module function
790 int usbhs_pipe_probe(struct usbhs_priv *priv)
792 struct usbhs_pipe_info *info = usbhs_priv_to_pipeinfo(priv);
793 struct usbhs_pipe *pipe;
794 struct device *dev = usbhs_priv_to_dev(priv);
795 struct renesas_usbhs_driver_pipe_config *pipe_configs =
796 usbhs_get_dparam(priv, pipe_configs);
797 int pipe_size = usbhs_get_dparam(priv, pipe_size);
798 int i;
800 /* This driver expects 1st pipe is DCP */
801 if (pipe_configs[0].type != USB_ENDPOINT_XFER_CONTROL) {
802 dev_err(dev, "1st PIPE is not DCP\n");
803 return -EINVAL;
806 info->pipe = kcalloc(pipe_size, sizeof(struct usbhs_pipe),
807 GFP_KERNEL);
808 if (!info->pipe)
809 return -ENOMEM;
811 info->size = pipe_size;
814 * init pipe
816 usbhs_for_each_pipe_with_dcp(pipe, priv, i) {
817 pipe->priv = priv;
819 usbhs_pipe_type(pipe) =
820 pipe_configs[i].type & USB_ENDPOINT_XFERTYPE_MASK;
822 dev_dbg(dev, "pipe %x\t: %s\n",
823 i, usbhsp_pipe_name[pipe_configs[i].type]);
826 return 0;
829 void usbhs_pipe_remove(struct usbhs_priv *priv)
831 struct usbhs_pipe_info *info = usbhs_priv_to_pipeinfo(priv);
833 kfree(info->pipe);