drivers/usb/serial/visor.h

   1 // SPDX-License-Identifier: GPL-2.0+
   2 /*
   3  * USB HandSpring Visor driver
   4  *
   5  *      Copyright (C) 1999 - 2003
   6  *          Greg Kroah-Hartman (greg@kroah.com)
   7  *
   8  * See Documentation/usb/usb-serial.txt for more information on using this
   9  * driver.
  10  *
  11  */
  12
  13 #ifndef __LINUX_USB_SERIAL_VISOR_H
  14 #define __LINUX_USB_SERIAL_VISOR_H
  15
  16
  17 #define HANDSPRING_VENDOR_ID            0x082d
  18 #define HANDSPRING_VISOR_ID             0x0100
  19 #define HANDSPRING_TREO_ID              0x0200
  20 #define HANDSPRING_TREO600_ID           0x0300
  21
  22 #define PALM_VENDOR_ID                  0x0830
  23 #define PALM_M500_ID                    0x0001
  24 #define PALM_M505_ID                    0x0002
  25 #define PALM_M515_ID                    0x0003
  26 #define PALM_I705_ID                    0x0020
  27 #define PALM_M125_ID                    0x0040
  28 #define PALM_M130_ID                    0x0050
  29 #define PALM_TUNGSTEN_T_ID              0x0060
  30 #define PALM_TREO_650                   0x0061
  31 #define PALM_TUNGSTEN_Z_ID              0x0031
  32 #define PALM_ZIRE_ID                    0x0070
  33 #define PALM_M100_ID                    0x0080
  34
  35 #define GSPDA_VENDOR_ID         0x115e
  36 #define GSPDA_XPLORE_M68_ID             0xf100
  37
  38 #define SONY_VENDOR_ID                  0x054C
  39 #define SONY_CLIE_3_5_ID                0x0038
  40 #define SONY_CLIE_4_0_ID                0x0066
  41 #define SONY_CLIE_S360_ID               0x0095
  42 #define SONY_CLIE_4_1_ID                0x009A
  43 #define SONY_CLIE_NX60_ID               0x00DA
  44 #define SONY_CLIE_NZ90V_ID              0x00E9
  45 #define SONY_CLIE_UX50_ID               0x0144
  46 #define SONY_CLIE_TJ25_ID               0x0169
  47
  48 #define ACER_VENDOR_ID                  0x0502
  49 #define ACER_S10_ID                     0x0001
  50
  51 #define SAMSUNG_VENDOR_ID               0x04E8
  52 #define SAMSUNG_SCH_I330_ID             0x8001
  53 #define SAMSUNG_SPH_I500_ID             0x6601
  54
  55 #define TAPWAVE_VENDOR_ID               0x12EF
  56 #define TAPWAVE_ZODIAC_ID               0x0100
  57
  58 #define GARMIN_VENDOR_ID                0x091E
  59 #define GARMIN_IQUE_3600_ID             0x0004
  60
  61 #define ACEECA_VENDOR_ID                0x4766
  62 #define ACEECA_MEZ1000_ID               0x0001
  63
  64 #define KYOCERA_VENDOR_ID               0x0C88
  65 #define KYOCERA_7135_ID                 0x0021
  66
  67 #define FOSSIL_VENDOR_ID                0x0E67
  68 #define FOSSIL_ABACUS_ID                0x0002
  69
  70 /****************************************************************************
  71  * Handspring Visor Vendor specific request codes (bRequest values)
  72  * A big thank you to Handspring for providing the following information.
  73  * If anyone wants the original file where these values and structures came
  74  * from, send email to <greg@kroah.com>.
  75  ****************************************************************************/
  76
  77 /****************************************************************************
  78  * VISOR_REQUEST_BYTES_AVAILABLE asks the visor for the number of bytes that
  79  * are available to be transferred to the host for the specified endpoint.
  80  * Currently this is not used, and always returns 0x0001
  81  ****************************************************************************/
  82 #define VISOR_REQUEST_BYTES_AVAILABLE           0x01
  83
  84 /****************************************************************************
  85  * VISOR_CLOSE_NOTIFICATION is set to the device to notify it that the host
  86  * is now closing the pipe. An empty packet is sent in response.
  87  ****************************************************************************/
  88 #define VISOR_CLOSE_NOTIFICATION                0x02
  89
  90 /****************************************************************************
  91  * VISOR_GET_CONNECTION_INFORMATION is sent by the host during enumeration to
  92  * get the endpoints used by the connection.
  93  ****************************************************************************/
  94 #define VISOR_GET_CONNECTION_INFORMATION        0x03
  95
  96
  97 /****************************************************************************
  98  * VISOR_GET_CONNECTION_INFORMATION returns data in the following format
  99  ****************************************************************************/
 100 struct visor_connection_info {
 101         __le16  num_ports;
 102         struct {
 103                 __u8    port_function_id;
 104                 __u8    port;
 105         } connections[2];
 106 };
 107
 108
 109 /* struct visor_connection_info.connection[x].port defines: */
 110 #define VISOR_ENDPOINT_1                0x01
 111 #define VISOR_ENDPOINT_2                0x02
 112
 113 /* struct visor_connection_info.connection[x].port_function_id defines: */
 114 #define VISOR_FUNCTION_GENERIC          0x00
 115 #define VISOR_FUNCTION_DEBUGGER         0x01
 116 #define VISOR_FUNCTION_HOTSYNC          0x02
 117 #define VISOR_FUNCTION_CONSOLE          0x03
 118 #define VISOR_FUNCTION_REMOTE_FILE_SYS  0x04
 119
 120
 121 /****************************************************************************
 122  * PALM_GET_SOME_UNKNOWN_INFORMATION is sent by the host during enumeration to
 123  * get some information from the M series devices, that is currently unknown.
 124  ****************************************************************************/
 125 #define PALM_GET_EXT_CONNECTION_INFORMATION     0x04
 126
 127 /**
 128  * struct palm_ext_connection_info - return data from a PALM_GET_EXT_CONNECTION_INFORMATION request
 129  * @num_ports: maximum number of functions/connections in use
 130  * @endpoint_numbers_different: will be 1 if in and out endpoints numbers are
 131  *      different, otherwise it is 0.  If value is 1, then
 132  *      connections.end_point_info is non-zero.  If value is 0, then
 133  *      connections.port contains the endpoint number, which is the same for in
 134  *      and out.
 135  * @port_function_id: contains the creator id of the application that opened
 136  *      this connection.
 137  * @port: contains the in/out endpoint number.  Is 0 if in and out endpoint
 138  *      numbers are different.
 139  * @end_point_info: high nubbe is in endpoint and low nibble will indicate out
 140  *      endpoint.  Is 0 if in and out endpoints are the same.
 141  *
 142  * The maximum number of connections currently supported is 2
 143  */
 144 struct palm_ext_connection_info {
 145         __u8 num_ports;
 146         __u8 endpoint_numbers_different;
 147         __le16 reserved1;
 148         struct {
 149                 __u32 port_function_id;
 150                 __u8 port;
 151                 __u8 end_point_info;
 152                 __le16 reserved;
 153         } connections[2];
 154 };
 155
 156 #endif
 157