?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
rcutorture: Eliminate unused ts_rem local from rcu_trace_clock_local()
[linux/fpc-iii.git] / drivers / gpu / drm / gma500 / mdfld_intel_display.c
blob63c6e08600ae3a2351993dd5b6b824102a1e5420
1 /*
2 * Copyright © 2006-2007 Intel Corporation
3 *
4 * This program is free software; you can redistribute it and/or modify it
5 * under the terms and conditions of the GNU General Public License,
6 * version 2, as published by the Free Software Foundation.
7 *
8 * This program is distributed in the hope it will be useful, but WITHOUT
9 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
10 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
11 * more details.
12 *
13 * You should have received a copy of the GNU General Public License along with
14 * this program; if not, write to the Free Software Foundation, Inc.,
15 * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
16 *
17 * Authors:
18 * Eric Anholt <eric@anholt.net>
19 */
20
21 #include <linux/i2c.h>
22 #include <linux/pm_runtime.h>
23
24 #include <drm/drmP.h>
25 #include "psb_intel_reg.h"
26 #include "gma_display.h"
27 #include "framebuffer.h"
28 #include "mdfld_output.h"
29 #include "mdfld_dsi_output.h"
30
31 /* Hardcoded currently */
32 static int ksel = KSEL_CRYSTAL_19;
33
34 struct psb_intel_range_t {
35 int min, max;
36 };
37
38 struct mrst_limit_t {
39 struct psb_intel_range_t dot, m, p1;
40 };
41
42 struct mrst_clock_t {
43 /* derived values */
44 int dot;
45 int m;
46 int p1;
47 };
48
49 #define COUNT_MAX 0x10000000
50
51 void mdfldWaitForPipeDisable(struct drm_device *dev, int pipe)
52 {
53 struct drm_psb_private *dev_priv = dev->dev_private;
54 const struct psb_offset *map = &dev_priv->regmap[pipe];
55 int count, temp;
56
57 switch (pipe) {
58 case 0:
59 case 1:
60 case 2:
61 break;
62 default:
63 DRM_ERROR("Illegal Pipe Number.\n");
64 return;
65 }
66
67 /* FIXME JLIU7_PO */
68 gma_wait_for_vblank(dev);
69 return;
70
71 /* Wait for for the pipe disable to take effect. */
72 for (count = 0; count < COUNT_MAX; count++) {
73 temp = REG_READ(map->conf);
74 if ((temp & PIPEACONF_PIPE_STATE) == 0)
75 break;
76 }
77 }
78
79 void mdfldWaitForPipeEnable(struct drm_device *dev, int pipe)
80 {
81 struct drm_psb_private *dev_priv = dev->dev_private;
82 const struct psb_offset *map = &dev_priv->regmap[pipe];
83 int count, temp;
84
85 switch (pipe) {
86 case 0:
87 case 1:
88 case 2:
89 break;
90 default:
91 DRM_ERROR("Illegal Pipe Number.\n");
92 return;
93 }
94
95 /* FIXME JLIU7_PO */
96 gma_wait_for_vblank(dev);
97 return;
98
99 /* Wait for for the pipe enable to take effect. */
100 for (count = 0; count < COUNT_MAX; count++) {
101 temp = REG_READ(map->conf);
102 if ((temp & PIPEACONF_PIPE_STATE) == 1)
103 break;
104 }
105 }
106
107 /**
108 * Return the pipe currently connected to the panel fitter,
109 * or -1 if the panel fitter is not present or not in use
110 */
111 static int psb_intel_panel_fitter_pipe(struct drm_device *dev)
112 {
113 u32 pfit_control;
114
115 pfit_control = REG_READ(PFIT_CONTROL);
116
117 /* See if the panel fitter is in use */
118 if ((pfit_control & PFIT_ENABLE) == 0)
119 return -1;
120
121 /* 965 can place panel fitter on either pipe */
122 return (pfit_control >> 29) & 0x3;
123 }
124
125 static struct drm_device globle_dev;
126
127 void mdfld__intel_plane_set_alpha(int enable)
128 {
129 struct drm_device *dev = &globle_dev;
130 int dspcntr_reg = DSPACNTR;
131 u32 dspcntr;
132
133 dspcntr = REG_READ(dspcntr_reg);
134
135 if (enable) {
136 dspcntr &= ~DISPPLANE_32BPP_NO_ALPHA;
137 dspcntr |= DISPPLANE_32BPP;
138 } else {
139 dspcntr &= ~DISPPLANE_32BPP;
140 dspcntr |= DISPPLANE_32BPP_NO_ALPHA;
141 }
142
143 REG_WRITE(dspcntr_reg, dspcntr);
144 }
145
146 static int check_fb(struct drm_framebuffer *fb)
147 {
148 if (!fb)
149 return 0;
150
151 switch (fb->format->cpp[0] * 8) {
152 case 8:
153 case 16:
154 case 24:
155 case 32:
156 return 0;
157 default:
158 DRM_ERROR("Unknown color depth\n");
159 return -EINVAL;
160 }
161 }
162
163 static int mdfld__intel_pipe_set_base(struct drm_crtc *crtc, int x, int y,
164 struct drm_framebuffer *old_fb)
165 {
166 struct drm_device *dev = crtc->dev;
167 struct drm_psb_private *dev_priv = dev->dev_private;
168 struct drm_framebuffer *fb = crtc->primary->fb;
169 struct gma_crtc *gma_crtc = to_gma_crtc(crtc);
170 struct psb_framebuffer *psbfb = to_psb_fb(fb);
171 int pipe = gma_crtc->pipe;
172 const struct psb_offset *map = &dev_priv->regmap[pipe];
173 unsigned long start, offset;
174 u32 dspcntr;
175 int ret;
176
177 memcpy(&globle_dev, dev, sizeof(struct drm_device));
178
179 dev_dbg(dev->dev, "pipe = 0x%x.\n", pipe);
180
181 /* no fb bound */
182 if (!fb) {
183 dev_dbg(dev->dev, "No FB bound\n");
184 return 0;
185 }
186
187 ret = check_fb(fb);
188 if (ret)
189 return ret;
190
191 if (pipe > 2) {
192 DRM_ERROR("Illegal Pipe Number.\n");
193 return -EINVAL;
194 }
195
196 if (!gma_power_begin(dev, true))
197 return 0;
198
199 start = psbfb->gtt->offset;
200 offset = y * fb->pitches[0] + x * fb->format->cpp[0];
201
202 REG_WRITE(map->stride, fb->pitches[0]);
203 dspcntr = REG_READ(map->cntr);
204 dspcntr &= ~DISPPLANE_PIXFORMAT_MASK;
205
206 switch (fb->format->cpp[0] * 8) {
207 case 8:
208 dspcntr |= DISPPLANE_8BPP;
209 break;
210 case 16:
211 if (fb->format->depth == 15)
212 dspcntr |= DISPPLANE_15_16BPP;
213 else
214 dspcntr |= DISPPLANE_16BPP;
215 break;
216 case 24:
217 case 32:
218 dspcntr |= DISPPLANE_32BPP_NO_ALPHA;
219 break;
220 }
221 REG_WRITE(map->cntr, dspcntr);
222
223 dev_dbg(dev->dev, "Writing base %08lX %08lX %d %d\n",
224 start, offset, x, y);
225 REG_WRITE(map->linoff, offset);
226 REG_READ(map->linoff);
227 REG_WRITE(map->surf, start);
228 REG_READ(map->surf);
229
230 gma_power_end(dev);
231
232 return 0;
233 }
234
235 /*
236 * Disable the pipe, plane and pll.
237 *
238 */
239 void mdfld_disable_crtc(struct drm_device *dev, int pipe)
240 {
241 struct drm_psb_private *dev_priv = dev->dev_private;
242 const struct psb_offset *map = &dev_priv->regmap[pipe];
243 u32 temp;
244
245 dev_dbg(dev->dev, "pipe = %d\n", pipe);
246
247
248 if (pipe != 1)
249 mdfld_dsi_gen_fifo_ready(dev, MIPI_GEN_FIFO_STAT_REG(pipe),
250 HS_CTRL_FIFO_EMPTY | HS_DATA_FIFO_EMPTY);
251
252 /* Disable display plane */
253 temp = REG_READ(map->cntr);
254 if ((temp & DISPLAY_PLANE_ENABLE) != 0) {
255 REG_WRITE(map->cntr,
256 temp & ~DISPLAY_PLANE_ENABLE);
257 /* Flush the plane changes */
258 REG_WRITE(map->base, REG_READ(map->base));
259 REG_READ(map->base);
260 }
261
262 /* FIXME_JLIU7 MDFLD_PO revisit */
263
264 /* Next, disable display pipes */
265 temp = REG_READ(map->conf);
266 if ((temp & PIPEACONF_ENABLE) != 0) {
267 temp &= ~PIPEACONF_ENABLE;
268 temp |= PIPECONF_PLANE_OFF | PIPECONF_CURSOR_OFF;
269 REG_WRITE(map->conf, temp);
270 REG_READ(map->conf);
271
272 /* Wait for for the pipe disable to take effect. */
273 mdfldWaitForPipeDisable(dev, pipe);
274 }
275
276 temp = REG_READ(map->dpll);
277 if (temp & DPLL_VCO_ENABLE) {
278 if ((pipe != 1 &&
279 !((REG_READ(PIPEACONF) | REG_READ(PIPECCONF))
280 & PIPEACONF_ENABLE)) || pipe == 1) {
281 temp &= ~(DPLL_VCO_ENABLE);
282 REG_WRITE(map->dpll, temp);
283 REG_READ(map->dpll);
284 /* Wait for the clocks to turn off. */
285 /* FIXME_MDFLD PO may need more delay */
286 udelay(500);
287
288 if (!(temp & MDFLD_PWR_GATE_EN)) {
289 /* gating power of DPLL */
290 REG_WRITE(map->dpll, temp | MDFLD_PWR_GATE_EN);
291 /* FIXME_MDFLD PO - change 500 to 1 after PO */
292 udelay(5000);
293 }
294 }
295 }
296
297 }
298
299 /**
300 * Sets the power management mode of the pipe and plane.
301 *
302 * This code should probably grow support for turning the cursor off and back
303 * on appropriately at the same time as we're turning the pipe off/on.
304 */
305 static void mdfld_crtc_dpms(struct drm_crtc *crtc, int mode)
306 {
307 struct drm_device *dev = crtc->dev;
308 struct drm_psb_private *dev_priv = dev->dev_private;
309 struct gma_crtc *gma_crtc = to_gma_crtc(crtc);
310 int pipe = gma_crtc->pipe;
311 const struct psb_offset *map = &dev_priv->regmap[pipe];
312 u32 pipeconf = dev_priv->pipeconf[pipe];
313 u32 temp;
314 int timeout = 0;
315
316 dev_dbg(dev->dev, "mode = %d, pipe = %d\n", mode, pipe);
317
318 /* Note: Old code uses pipe a stat for pipe b but that appears
319 to be a bug */
320
321 if (!gma_power_begin(dev, true))
322 return;
323
324 /* XXX: When our outputs are all unaware of DPMS modes other than off
325 * and on, we should map those modes to DRM_MODE_DPMS_OFF in the CRTC.
326 */
327 switch (mode) {
328 case DRM_MODE_DPMS_ON:
329 case DRM_MODE_DPMS_STANDBY:
330 case DRM_MODE_DPMS_SUSPEND:
331 /* Enable the DPLL */
332 temp = REG_READ(map->dpll);
333
334 if ((temp & DPLL_VCO_ENABLE) == 0) {
335 /* When ungating power of DPLL, needs to wait 0.5us
336 before enable the VCO */
337 if (temp & MDFLD_PWR_GATE_EN) {
338 temp &= ~MDFLD_PWR_GATE_EN;
339 REG_WRITE(map->dpll, temp);
340 /* FIXME_MDFLD PO - change 500 to 1 after PO */
341 udelay(500);
342 }
343
344 REG_WRITE(map->dpll, temp);
345 REG_READ(map->dpll);
346 /* FIXME_MDFLD PO - change 500 to 1 after PO */
347 udelay(500);
348
349 REG_WRITE(map->dpll, temp | DPLL_VCO_ENABLE);
350 REG_READ(map->dpll);
351
352 /**
353 * wait for DSI PLL to lock
354 * NOTE: only need to poll status of pipe 0 and pipe 1,
355 * since both MIPI pipes share the same PLL.
356 */
357 while ((pipe != 2) && (timeout < 20000) &&
358 !(REG_READ(map->conf) & PIPECONF_DSIPLL_LOCK)) {
359 udelay(150);
360 timeout++;
361 }
362 }
363
364 /* Enable the plane */
365 temp = REG_READ(map->cntr);
366 if ((temp & DISPLAY_PLANE_ENABLE) == 0) {
367 REG_WRITE(map->cntr,
368 temp | DISPLAY_PLANE_ENABLE);
369 /* Flush the plane changes */
370 REG_WRITE(map->base, REG_READ(map->base));
371 }
372
373 /* Enable the pipe */
374 temp = REG_READ(map->conf);
375 if ((temp & PIPEACONF_ENABLE) == 0) {
376 REG_WRITE(map->conf, pipeconf);
377
378 /* Wait for for the pipe enable to take effect. */
379 mdfldWaitForPipeEnable(dev, pipe);
380 }
381
382 /*workaround for sighting 3741701 Random X blank display*/
383 /*perform w/a in video mode only on pipe A or C*/
384 if (pipe == 0 || pipe == 2) {
385 REG_WRITE(map->status, REG_READ(map->status));
386 msleep(100);
387 if (PIPE_VBLANK_STATUS & REG_READ(map->status))
388 dev_dbg(dev->dev, "OK");
389 else {
390 dev_dbg(dev->dev, "STUCK!!!!");
391 /*shutdown controller*/
392 temp = REG_READ(map->cntr);
393 REG_WRITE(map->cntr,
394 temp & ~DISPLAY_PLANE_ENABLE);
395 REG_WRITE(map->base, REG_READ(map->base));
396 /*mdfld_dsi_dpi_shut_down(dev, pipe);*/
397 REG_WRITE(0xb048, 1);
398 msleep(100);
399 temp = REG_READ(map->conf);
400 temp &= ~PIPEACONF_ENABLE;
401 REG_WRITE(map->conf, temp);
402 msleep(100); /*wait for pipe disable*/
403 REG_WRITE(MIPI_DEVICE_READY_REG(pipe), 0);
404 msleep(100);
405 REG_WRITE(0xb004, REG_READ(0xb004));
406 /* try to bring the controller back up again*/
407 REG_WRITE(MIPI_DEVICE_READY_REG(pipe), 1);
408 temp = REG_READ(map->cntr);
409 REG_WRITE(map->cntr,
410 temp | DISPLAY_PLANE_ENABLE);
411 REG_WRITE(map->base, REG_READ(map->base));
412 /*mdfld_dsi_dpi_turn_on(dev, pipe);*/
413 REG_WRITE(0xb048, 2);
414 msleep(100);
415 temp = REG_READ(map->conf);
416 temp |= PIPEACONF_ENABLE;
417 REG_WRITE(map->conf, temp);
418 }
419 }
420
421 gma_crtc_load_lut(crtc);
422
423 /* Give the overlay scaler a chance to enable
424 if it's on this pipe */
425 /* psb_intel_crtc_dpms_video(crtc, true); TODO */
426
427 break;
428 case DRM_MODE_DPMS_OFF:
429 /* Give the overlay scaler a chance to disable
430 * if it's on this pipe */
431 /* psb_intel_crtc_dpms_video(crtc, FALSE); TODO */
432 if (pipe != 1)
433 mdfld_dsi_gen_fifo_ready(dev,
434 MIPI_GEN_FIFO_STAT_REG(pipe),
435 HS_CTRL_FIFO_EMPTY | HS_DATA_FIFO_EMPTY);
436
437 /* Disable the VGA plane that we never use */
438 REG_WRITE(VGACNTRL, VGA_DISP_DISABLE);
439
440 /* Disable display plane */
441 temp = REG_READ(map->cntr);
442 if ((temp & DISPLAY_PLANE_ENABLE) != 0) {
443 REG_WRITE(map->cntr,
444 temp & ~DISPLAY_PLANE_ENABLE);
445 /* Flush the plane changes */
446 REG_WRITE(map->base, REG_READ(map->base));
447 REG_READ(map->base);
448 }
449
450 /* Next, disable display pipes */
451 temp = REG_READ(map->conf);
452 if ((temp & PIPEACONF_ENABLE) != 0) {
453 temp &= ~PIPEACONF_ENABLE;
454 temp |= PIPECONF_PLANE_OFF | PIPECONF_CURSOR_OFF;
455 REG_WRITE(map->conf, temp);
456 REG_READ(map->conf);
457
458 /* Wait for for the pipe disable to take effect. */
459 mdfldWaitForPipeDisable(dev, pipe);
460 }
461
462 temp = REG_READ(map->dpll);
463 if (temp & DPLL_VCO_ENABLE) {
464 if ((pipe != 1 && !((REG_READ(PIPEACONF)
465 | REG_READ(PIPECCONF)) & PIPEACONF_ENABLE))
466 || pipe == 1) {
467 temp &= ~(DPLL_VCO_ENABLE);
468 REG_WRITE(map->dpll, temp);
469 REG_READ(map->dpll);
470 /* Wait for the clocks to turn off. */
471 /* FIXME_MDFLD PO may need more delay */
472 udelay(500);
473 }
474 }
475 break;
476 }
477 gma_power_end(dev);
478 }
479
480
481 #define MDFLD_LIMT_DPLL_19 0
482 #define MDFLD_LIMT_DPLL_25 1
483 #define MDFLD_LIMT_DPLL_83 2
484 #define MDFLD_LIMT_DPLL_100 3
485 #define MDFLD_LIMT_DSIPLL_19 4
486 #define MDFLD_LIMT_DSIPLL_25 5
487 #define MDFLD_LIMT_DSIPLL_83 6
488 #define MDFLD_LIMT_DSIPLL_100 7
489
490 #define MDFLD_DOT_MIN 19750
491 #define MDFLD_DOT_MAX 120000
492 #define MDFLD_DPLL_M_MIN_19 113
493 #define MDFLD_DPLL_M_MAX_19 155
494 #define MDFLD_DPLL_P1_MIN_19 2
495 #define MDFLD_DPLL_P1_MAX_19 10
496 #define MDFLD_DPLL_M_MIN_25 101
497 #define MDFLD_DPLL_M_MAX_25 130
498 #define MDFLD_DPLL_P1_MIN_25 2
499 #define MDFLD_DPLL_P1_MAX_25 10
500 #define MDFLD_DPLL_M_MIN_83 64
501 #define MDFLD_DPLL_M_MAX_83 64
502 #define MDFLD_DPLL_P1_MIN_83 2
503 #define MDFLD_DPLL_P1_MAX_83 2
504 #define MDFLD_DPLL_M_MIN_100 64
505 #define MDFLD_DPLL_M_MAX_100 64
506 #define MDFLD_DPLL_P1_MIN_100 2
507 #define MDFLD_DPLL_P1_MAX_100 2
508 #define MDFLD_DSIPLL_M_MIN_19 131
509 #define MDFLD_DSIPLL_M_MAX_19 175
510 #define MDFLD_DSIPLL_P1_MIN_19 3
511 #define MDFLD_DSIPLL_P1_MAX_19 8
512 #define MDFLD_DSIPLL_M_MIN_25 97
513 #define MDFLD_DSIPLL_M_MAX_25 140
514 #define MDFLD_DSIPLL_P1_MIN_25 3
515 #define MDFLD_DSIPLL_P1_MAX_25 9
516 #define MDFLD_DSIPLL_M_MIN_83 33
517 #define MDFLD_DSIPLL_M_MAX_83 92
518 #define MDFLD_DSIPLL_P1_MIN_83 2
519 #define MDFLD_DSIPLL_P1_MAX_83 3
520 #define MDFLD_DSIPLL_M_MIN_100 97
521 #define MDFLD_DSIPLL_M_MAX_100 140
522 #define MDFLD_DSIPLL_P1_MIN_100 3
523 #define MDFLD_DSIPLL_P1_MAX_100 9
524
525 static const struct mrst_limit_t mdfld_limits[] = {
526 { /* MDFLD_LIMT_DPLL_19 */
527 .dot = {.min = MDFLD_DOT_MIN, .max = MDFLD_DOT_MAX},
528 .m = {.min = MDFLD_DPLL_M_MIN_19, .max = MDFLD_DPLL_M_MAX_19},
529 .p1 = {.min = MDFLD_DPLL_P1_MIN_19, .max = MDFLD_DPLL_P1_MAX_19},
530 },
531 { /* MDFLD_LIMT_DPLL_25 */
532 .dot = {.min = MDFLD_DOT_MIN, .max = MDFLD_DOT_MAX},
533 .m = {.min = MDFLD_DPLL_M_MIN_25, .max = MDFLD_DPLL_M_MAX_25},
534 .p1 = {.min = MDFLD_DPLL_P1_MIN_25, .max = MDFLD_DPLL_P1_MAX_25},
535 },
536 { /* MDFLD_LIMT_DPLL_83 */
537 .dot = {.min = MDFLD_DOT_MIN, .max = MDFLD_DOT_MAX},
538 .m = {.min = MDFLD_DPLL_M_MIN_83, .max = MDFLD_DPLL_M_MAX_83},
539 .p1 = {.min = MDFLD_DPLL_P1_MIN_83, .max = MDFLD_DPLL_P1_MAX_83},
540 },
541 { /* MDFLD_LIMT_DPLL_100 */
542 .dot = {.min = MDFLD_DOT_MIN, .max = MDFLD_DOT_MAX},
543 .m = {.min = MDFLD_DPLL_M_MIN_100, .max = MDFLD_DPLL_M_MAX_100},
544 .p1 = {.min = MDFLD_DPLL_P1_MIN_100, .max = MDFLD_DPLL_P1_MAX_100},
545 },
546 { /* MDFLD_LIMT_DSIPLL_19 */
547 .dot = {.min = MDFLD_DOT_MIN, .max = MDFLD_DOT_MAX},
548 .m = {.min = MDFLD_DSIPLL_M_MIN_19, .max = MDFLD_DSIPLL_M_MAX_19},
549 .p1 = {.min = MDFLD_DSIPLL_P1_MIN_19, .max = MDFLD_DSIPLL_P1_MAX_19},
550 },
551 { /* MDFLD_LIMT_DSIPLL_25 */
552 .dot = {.min = MDFLD_DOT_MIN, .max = MDFLD_DOT_MAX},
553 .m = {.min = MDFLD_DSIPLL_M_MIN_25, .max = MDFLD_DSIPLL_M_MAX_25},
554 .p1 = {.min = MDFLD_DSIPLL_P1_MIN_25, .max = MDFLD_DSIPLL_P1_MAX_25},
555 },
556 { /* MDFLD_LIMT_DSIPLL_83 */
557 .dot = {.min = MDFLD_DOT_MIN, .max = MDFLD_DOT_MAX},
558 .m = {.min = MDFLD_DSIPLL_M_MIN_83, .max = MDFLD_DSIPLL_M_MAX_83},
559 .p1 = {.min = MDFLD_DSIPLL_P1_MIN_83, .max = MDFLD_DSIPLL_P1_MAX_83},
560 },
561 { /* MDFLD_LIMT_DSIPLL_100 */
562 .dot = {.min = MDFLD_DOT_MIN, .max = MDFLD_DOT_MAX},
563 .m = {.min = MDFLD_DSIPLL_M_MIN_100, .max = MDFLD_DSIPLL_M_MAX_100},
564 .p1 = {.min = MDFLD_DSIPLL_P1_MIN_100, .max = MDFLD_DSIPLL_P1_MAX_100},
565 },
566 };
567
568 #define MDFLD_M_MIN 21
569 #define MDFLD_M_MAX 180
570 static const u32 mdfld_m_converts[] = {
571 /* M configuration table from 9-bit LFSR table */
572 224, 368, 440, 220, 366, 439, 219, 365, 182, 347, /* 21 - 30 */
573 173, 342, 171, 85, 298, 149, 74, 37, 18, 265, /* 31 - 40 */
574 388, 194, 353, 432, 216, 108, 310, 155, 333, 166, /* 41 - 50 */
575 83, 41, 276, 138, 325, 162, 337, 168, 340, 170, /* 51 - 60 */
576 341, 426, 469, 234, 373, 442, 221, 110, 311, 411, /* 61 - 70 */
577 461, 486, 243, 377, 188, 350, 175, 343, 427, 213, /* 71 - 80 */
578 106, 53, 282, 397, 354, 227, 113, 56, 284, 142, /* 81 - 90 */
579 71, 35, 273, 136, 324, 418, 465, 488, 500, 506, /* 91 - 100 */
580 253, 126, 63, 287, 399, 455, 483, 241, 376, 444, /* 101 - 110 */
581 478, 495, 503, 251, 381, 446, 479, 239, 375, 443, /* 111 - 120 */
582 477, 238, 119, 315, 157, 78, 295, 147, 329, 420, /* 121 - 130 */
583 210, 105, 308, 154, 77, 38, 275, 137, 68, 290, /* 131 - 140 */
584 145, 328, 164, 82, 297, 404, 458, 485, 498, 249, /* 141 - 150 */
585 380, 190, 351, 431, 471, 235, 117, 314, 413, 206, /* 151 - 160 */
586 103, 51, 25, 12, 262, 387, 193, 96, 48, 280, /* 161 - 170 */
587 396, 198, 99, 305, 152, 76, 294, 403, 457, 228, /* 171 - 180 */
588 };
589
590 static const struct mrst_limit_t *mdfld_limit(struct drm_crtc *crtc)
591 {
592 const struct mrst_limit_t *limit = NULL;
593 struct drm_device *dev = crtc->dev;
594 struct drm_psb_private *dev_priv = dev->dev_private;
595
596 if (gma_pipe_has_type(crtc, INTEL_OUTPUT_MIPI)
597 || gma_pipe_has_type(crtc, INTEL_OUTPUT_MIPI2)) {
598 if ((ksel == KSEL_CRYSTAL_19) || (ksel == KSEL_BYPASS_19))
599 limit = &mdfld_limits[MDFLD_LIMT_DSIPLL_19];
600 else if (ksel == KSEL_BYPASS_25)
601 limit = &mdfld_limits[MDFLD_LIMT_DSIPLL_25];
602 else if ((ksel == KSEL_BYPASS_83_100) &&
603 (dev_priv->core_freq == 166))
604 limit = &mdfld_limits[MDFLD_LIMT_DSIPLL_83];
605 else if ((ksel == KSEL_BYPASS_83_100) &&
606 (dev_priv->core_freq == 100 ||
607 dev_priv->core_freq == 200))
608 limit = &mdfld_limits[MDFLD_LIMT_DSIPLL_100];
609 } else if (gma_pipe_has_type(crtc, INTEL_OUTPUT_HDMI)) {
610 if ((ksel == KSEL_CRYSTAL_19) || (ksel == KSEL_BYPASS_19))
611 limit = &mdfld_limits[MDFLD_LIMT_DPLL_19];
612 else if (ksel == KSEL_BYPASS_25)
613 limit = &mdfld_limits[MDFLD_LIMT_DPLL_25];
614 else if ((ksel == KSEL_BYPASS_83_100) &&
615 (dev_priv->core_freq == 166))
616 limit = &mdfld_limits[MDFLD_LIMT_DPLL_83];
617 else if ((ksel == KSEL_BYPASS_83_100) &&
618 (dev_priv->core_freq == 100 ||
619 dev_priv->core_freq == 200))
620 limit = &mdfld_limits[MDFLD_LIMT_DPLL_100];
621 } else {
622 limit = NULL;
623 dev_dbg(dev->dev, "mdfld_limit Wrong display type.\n");
624 }
625
626 return limit;
627 }
628
629 /** Derive the pixel clock for the given refclk and divisors for 8xx chips. */
630 static void mdfld_clock(int refclk, struct mrst_clock_t *clock)
631 {
632 clock->dot = (refclk * clock->m) / clock->p1;
633 }
634
635 /**
636 * Returns a set of divisors for the desired target clock with the given refclk,
637 * or FALSE. Divisor values are the actual divisors for
638 */
639 static bool
640 mdfldFindBestPLL(struct drm_crtc *crtc, int target, int refclk,
641 struct mrst_clock_t *best_clock)
642 {
643 struct mrst_clock_t clock;
644 const struct mrst_limit_t *limit = mdfld_limit(crtc);
645 int err = target;
646
647 memset(best_clock, 0, sizeof(*best_clock));
648
649 for (clock.m = limit->m.min; clock.m <= limit->m.max; clock.m++) {
650 for (clock.p1 = limit->p1.min; clock.p1 <= limit->p1.max;
651 clock.p1++) {
652 int this_err;
653
654 mdfld_clock(refclk, &clock);
655
656 this_err = abs(clock.dot - target);
657 if (this_err < err) {
658 *best_clock = clock;
659 err = this_err;
660 }
661 }
662 }
663 return err != target;
664 }
665
666 static int mdfld_crtc_mode_set(struct drm_crtc *crtc,
667 struct drm_display_mode *mode,
668 struct drm_display_mode *adjusted_mode,
669 int x, int y,
670 struct drm_framebuffer *old_fb)
671 {
672 struct drm_device *dev = crtc->dev;
673 struct gma_crtc *gma_crtc = to_gma_crtc(crtc);
674 struct drm_psb_private *dev_priv = dev->dev_private;
675 int pipe = gma_crtc->pipe;
676 const struct psb_offset *map = &dev_priv->regmap[pipe];
677 int refclk = 0;
678 int clk_n = 0, clk_p2 = 0, clk_byte = 1, clk = 0, m_conv = 0,
679 clk_tmp = 0;
680 struct mrst_clock_t clock;
681 bool ok;
682 u32 dpll = 0, fp = 0;
683 bool is_mipi = false, is_mipi2 = false, is_hdmi = false;
684 struct drm_mode_config *mode_config = &dev->mode_config;
685 struct gma_encoder *gma_encoder = NULL;
686 uint64_t scalingType = DRM_MODE_SCALE_FULLSCREEN;
687 struct drm_encoder *encoder;
688 struct drm_connector *connector;
689 int timeout = 0;
690 int ret;
691
692 dev_dbg(dev->dev, "pipe = 0x%x\n", pipe);
693
694 #if 0
695 if (pipe == 1) {
696 if (!gma_power_begin(dev, true))
697 return 0;
698 android_hdmi_crtc_mode_set(crtc, mode, adjusted_mode,
699 x, y, old_fb);
700 goto mrst_crtc_mode_set_exit;
701 }
702 #endif
703
704 ret = check_fb(crtc->primary->fb);
705 if (ret)
706 return ret;
707
708 dev_dbg(dev->dev, "adjusted_hdisplay = %d\n",
709 adjusted_mode->hdisplay);
710 dev_dbg(dev->dev, "adjusted_vdisplay = %d\n",
711 adjusted_mode->vdisplay);
712 dev_dbg(dev->dev, "adjusted_hsync_start = %d\n",
713 adjusted_mode->hsync_start);
714 dev_dbg(dev->dev, "adjusted_hsync_end = %d\n",
715 adjusted_mode->hsync_end);
716 dev_dbg(dev->dev, "adjusted_htotal = %d\n",
717 adjusted_mode->htotal);
718 dev_dbg(dev->dev, "adjusted_vsync_start = %d\n",
719 adjusted_mode->vsync_start);
720 dev_dbg(dev->dev, "adjusted_vsync_end = %d\n",
721 adjusted_mode->vsync_end);
722 dev_dbg(dev->dev, "adjusted_vtotal = %d\n",
723 adjusted_mode->vtotal);
724 dev_dbg(dev->dev, "adjusted_clock = %d\n",
725 adjusted_mode->clock);
726 dev_dbg(dev->dev, "hdisplay = %d\n",
727 mode->hdisplay);
728 dev_dbg(dev->dev, "vdisplay = %d\n",
729 mode->vdisplay);
730
731 if (!gma_power_begin(dev, true))
732 return 0;
733
734 memcpy(&gma_crtc->saved_mode, mode,
735 sizeof(struct drm_display_mode));
736 memcpy(&gma_crtc->saved_adjusted_mode, adjusted_mode,
737 sizeof(struct drm_display_mode));
738
739 list_for_each_entry(connector, &mode_config->connector_list, head) {
740 if (!connector)
741 continue;
742
743 encoder = connector->encoder;
744
745 if (!encoder)
746 continue;
747
748 if (encoder->crtc != crtc)
749 continue;
750
751 gma_encoder = gma_attached_encoder(connector);
752
753 switch (gma_encoder->type) {
754 case INTEL_OUTPUT_MIPI:
755 is_mipi = true;
756 break;
757 case INTEL_OUTPUT_MIPI2:
758 is_mipi2 = true;
759 break;
760 case INTEL_OUTPUT_HDMI:
761 is_hdmi = true;
762 break;
763 }
764 }
765
766 /* Disable the VGA plane that we never use */
767 REG_WRITE(VGACNTRL, VGA_DISP_DISABLE);
768
769 /* Disable the panel fitter if it was on our pipe */
770 if (psb_intel_panel_fitter_pipe(dev) == pipe)
771 REG_WRITE(PFIT_CONTROL, 0);
772
773 /* pipesrc and dspsize control the size that is scaled from,
774 * which should always be the user's requested size.
775 */
776 if (pipe == 1) {
777 /* FIXME: To make HDMI display with 864x480 (TPO), 480x864
778 * (PYR) or 480x854 (TMD), set the sprite width/height and
779 * souce image size registers with the adjusted mode for
780 * pipe B.
781 */
782
783 /*
784 * The defined sprite rectangle must always be completely
785 * contained within the displayable area of the screen image
786 * (frame buffer).
787 */
788 REG_WRITE(map->size, ((min(mode->crtc_vdisplay, adjusted_mode->crtc_vdisplay) - 1) << 16)
789 | (min(mode->crtc_hdisplay, adjusted_mode->crtc_hdisplay) - 1));
790 /* Set the CRTC with encoder mode. */
791 REG_WRITE(map->src, ((mode->crtc_hdisplay - 1) << 16)
792 | (mode->crtc_vdisplay - 1));
793 } else {
794 REG_WRITE(map->size,
795 ((mode->crtc_vdisplay - 1) << 16) |
796 (mode->crtc_hdisplay - 1));
797 REG_WRITE(map->src,
798 ((mode->crtc_hdisplay - 1) << 16) |
799 (mode->crtc_vdisplay - 1));
800 }
801
802 REG_WRITE(map->pos, 0);
803
804 if (gma_encoder)
805 drm_object_property_get_value(&connector->base,
806 dev->mode_config.scaling_mode_property, &scalingType);
807
808 if (scalingType == DRM_MODE_SCALE_NO_SCALE) {
809 /* Medfield doesn't have register support for centering so we
810 * need to mess with the h/vblank and h/vsync start and ends
811 * to get centering
812 */
813 int offsetX = 0, offsetY = 0;
814
815 offsetX = (adjusted_mode->crtc_hdisplay -
816 mode->crtc_hdisplay) / 2;
817 offsetY = (adjusted_mode->crtc_vdisplay -
818 mode->crtc_vdisplay) / 2;
819
820 REG_WRITE(map->htotal, (mode->crtc_hdisplay - 1) |
821 ((adjusted_mode->crtc_htotal - 1) << 16));
822 REG_WRITE(map->vtotal, (mode->crtc_vdisplay - 1) |
823 ((adjusted_mode->crtc_vtotal - 1) << 16));
824 REG_WRITE(map->hblank, (adjusted_mode->crtc_hblank_start -
825 offsetX - 1) |
826 ((adjusted_mode->crtc_hblank_end - offsetX - 1) << 16));
827 REG_WRITE(map->hsync, (adjusted_mode->crtc_hsync_start -
828 offsetX - 1) |
829 ((adjusted_mode->crtc_hsync_end - offsetX - 1) << 16));
830 REG_WRITE(map->vblank, (adjusted_mode->crtc_vblank_start -
831 offsetY - 1) |
832 ((adjusted_mode->crtc_vblank_end - offsetY - 1) << 16));
833 REG_WRITE(map->vsync, (adjusted_mode->crtc_vsync_start -
834 offsetY - 1) |
835 ((adjusted_mode->crtc_vsync_end - offsetY - 1) << 16));
836 } else {
837 REG_WRITE(map->htotal, (adjusted_mode->crtc_hdisplay - 1) |
838 ((adjusted_mode->crtc_htotal - 1) << 16));
839 REG_WRITE(map->vtotal, (adjusted_mode->crtc_vdisplay - 1) |
840 ((adjusted_mode->crtc_vtotal - 1) << 16));
841 REG_WRITE(map->hblank, (adjusted_mode->crtc_hblank_start - 1) |
842 ((adjusted_mode->crtc_hblank_end - 1) << 16));
843 REG_WRITE(map->hsync, (adjusted_mode->crtc_hsync_start - 1) |
844 ((adjusted_mode->crtc_hsync_end - 1) << 16));
845 REG_WRITE(map->vblank, (adjusted_mode->crtc_vblank_start - 1) |
846 ((adjusted_mode->crtc_vblank_end - 1) << 16));
847 REG_WRITE(map->vsync, (adjusted_mode->crtc_vsync_start - 1) |
848 ((adjusted_mode->crtc_vsync_end - 1) << 16));
849 }
850
851 /* Flush the plane changes */
852 {
853 const struct drm_crtc_helper_funcs *crtc_funcs =
854 crtc->helper_private;
855 crtc_funcs->mode_set_base(crtc, x, y, old_fb);
856 }
857
858 /* setup pipeconf */
859 dev_priv->pipeconf[pipe] = PIPEACONF_ENABLE; /* FIXME_JLIU7 REG_READ(pipeconf_reg); */
860
861 /* Set up the display plane register */
862 dev_priv->dspcntr[pipe] = REG_READ(map->cntr);
863 dev_priv->dspcntr[pipe] |= pipe << DISPPLANE_SEL_PIPE_POS;
864 dev_priv->dspcntr[pipe] |= DISPLAY_PLANE_ENABLE;
865
866 if (is_mipi2)
867 goto mrst_crtc_mode_set_exit;
868 clk = adjusted_mode->clock;
869
870 if (is_hdmi) {
871 if ((ksel == KSEL_CRYSTAL_19) || (ksel == KSEL_BYPASS_19)) {
872 refclk = 19200;
873
874 if (is_mipi || is_mipi2)
875 clk_n = 1, clk_p2 = 8;
876 else if (is_hdmi)
877 clk_n = 1, clk_p2 = 10;
878 } else if (ksel == KSEL_BYPASS_25) {
879 refclk = 25000;
880
881 if (is_mipi || is_mipi2)
882 clk_n = 1, clk_p2 = 8;
883 else if (is_hdmi)
884 clk_n = 1, clk_p2 = 10;
885 } else if ((ksel == KSEL_BYPASS_83_100) &&
886 dev_priv->core_freq == 166) {
887 refclk = 83000;
888
889 if (is_mipi || is_mipi2)
890 clk_n = 4, clk_p2 = 8;
891 else if (is_hdmi)
892 clk_n = 4, clk_p2 = 10;
893 } else if ((ksel == KSEL_BYPASS_83_100) &&
894 (dev_priv->core_freq == 100 ||
895 dev_priv->core_freq == 200)) {
896 refclk = 100000;
897 if (is_mipi || is_mipi2)
898 clk_n = 4, clk_p2 = 8;
899 else if (is_hdmi)
900 clk_n = 4, clk_p2 = 10;
901 }
902
903 if (is_mipi)
904 clk_byte = dev_priv->bpp / 8;
905 else if (is_mipi2)
906 clk_byte = dev_priv->bpp2 / 8;
907
908 clk_tmp = clk * clk_n * clk_p2 * clk_byte;
909
910 dev_dbg(dev->dev, "clk = %d, clk_n = %d, clk_p2 = %d.\n",
911 clk, clk_n, clk_p2);
912 dev_dbg(dev->dev, "adjusted_mode->clock = %d, clk_tmp = %d.\n",
913 adjusted_mode->clock, clk_tmp);
914
915 ok = mdfldFindBestPLL(crtc, clk_tmp, refclk, &clock);
916
917 if (!ok) {
918 DRM_ERROR
919 ("mdfldFindBestPLL fail in mdfld_crtc_mode_set.\n");
920 } else {
921 m_conv = mdfld_m_converts[(clock.m - MDFLD_M_MIN)];
922
923 dev_dbg(dev->dev, "dot clock = %d,"
924 "m = %d, p1 = %d, m_conv = %d.\n",
925 clock.dot, clock.m,
926 clock.p1, m_conv);
927 }
928
929 dpll = REG_READ(map->dpll);
930
931 if (dpll & DPLL_VCO_ENABLE) {
932 dpll &= ~DPLL_VCO_ENABLE;
933 REG_WRITE(map->dpll, dpll);
934 REG_READ(map->dpll);
935
936 /* FIXME jliu7 check the DPLL lock bit PIPEACONF[29] */
937 /* FIXME_MDFLD PO - change 500 to 1 after PO */
938 udelay(500);
939
940 /* reset M1, N1 & P1 */
941 REG_WRITE(map->fp0, 0);
942 dpll &= ~MDFLD_P1_MASK;
943 REG_WRITE(map->dpll, dpll);
944 /* FIXME_MDFLD PO - change 500 to 1 after PO */
945 udelay(500);
946 }
947
948 /* When ungating power of DPLL, needs to wait 0.5us before
949 * enable the VCO */
950 if (dpll & MDFLD_PWR_GATE_EN) {
951 dpll &= ~MDFLD_PWR_GATE_EN;
952 REG_WRITE(map->dpll, dpll);
953 /* FIXME_MDFLD PO - change 500 to 1 after PO */
954 udelay(500);
955 }
956 dpll = 0;
957
958 #if 0 /* FIXME revisit later */
959 if (ksel == KSEL_CRYSTAL_19 || ksel == KSEL_BYPASS_19 ||
960 ksel == KSEL_BYPASS_25)
961 dpll &= ~MDFLD_INPUT_REF_SEL;
962 else if (ksel == KSEL_BYPASS_83_100)
963 dpll |= MDFLD_INPUT_REF_SEL;
964 #endif /* FIXME revisit later */
965
966 if (is_hdmi)
967 dpll |= MDFLD_VCO_SEL;
968
969 fp = (clk_n / 2) << 16;
970 fp |= m_conv;
971
972 /* compute bitmask from p1 value */
973 dpll |= (1 << (clock.p1 - 2)) << 17;
974
975 #if 0 /* 1080p30 & 720p */
976 dpll = 0x00050000;
977 fp = 0x000001be;
978 #endif
979 #if 0 /* 480p */
980 dpll = 0x02010000;
981 fp = 0x000000d2;
982 #endif
983 } else {
984 #if 0 /*DBI_TPO_480x864*/
985 dpll = 0x00020000;
986 fp = 0x00000156;
987 #endif /* DBI_TPO_480x864 */ /* get from spec. */
988
989 dpll = 0x00800000;
990 fp = 0x000000c1;
991 }
992
993 REG_WRITE(map->fp0, fp);
994 REG_WRITE(map->dpll, dpll);
995 /* FIXME_MDFLD PO - change 500 to 1 after PO */
996 udelay(500);
997
998 dpll |= DPLL_VCO_ENABLE;
999 REG_WRITE(map->dpll, dpll);
1000 REG_READ(map->dpll);
1001
1002 /* wait for DSI PLL to lock */
1003 while (timeout < 20000 &&
1004 !(REG_READ(map->conf) & PIPECONF_DSIPLL_LOCK)) {
1005 udelay(150);
1006 timeout++;
1007 }
1008
1009 if (is_mipi)
1010 goto mrst_crtc_mode_set_exit;
1011
1012 dev_dbg(dev->dev, "is_mipi = 0x%x\n", is_mipi);
1013
1014 REG_WRITE(map->conf, dev_priv->pipeconf[pipe]);
1015 REG_READ(map->conf);
1016
1017 /* Wait for for the pipe enable to take effect. */
1018 REG_WRITE(map->cntr, dev_priv->dspcntr[pipe]);
1019 gma_wait_for_vblank(dev);
1020
1021 mrst_crtc_mode_set_exit:
1022
1023 gma_power_end(dev);
1024
1025 return 0;
1026 }
1027
1028 const struct drm_crtc_helper_funcs mdfld_helper_funcs = {
1029 .dpms = mdfld_crtc_dpms,
1030 .mode_set = mdfld_crtc_mode_set,
1031 .mode_set_base = mdfld__intel_pipe_set_base,
1032 .prepare = gma_crtc_prepare,
1033 .commit = gma_crtc_commit,
1034 };
Linux with added FPC-III support