drivers/gpu/drm/zte/zx_vga.c

   1 /*
   2  * Copyright (C) 2017 Sanechips Technology Co., Ltd.
   3  * Copyright 2017 Linaro Ltd.
   4  *
   5  * This program is free software; you can redistribute it and/or modify
   6  * it under the terms of the GNU General Public License version 2 as
   7  * published by the Free Software Foundation.
   8  */
   9
  10 #include <linux/clk.h>
  11 #include <linux/component.h>
  12 #include <linux/mfd/syscon.h>
  13 #include <linux/regmap.h>
  14
  15 #include <drm/drm_atomic_helper.h>
  16 #include <drm/drm_crtc_helper.h>
  17 #include <drm/drmP.h>
  18
  19 #include "zx_drm_drv.h"
  20 #include "zx_vga_regs.h"
  21 #include "zx_vou.h"
  22
  23 struct zx_vga_pwrctrl {
  24         struct regmap *regmap;
  25         u32 reg;
  26         u32 mask;
  27 };
  28
  29 struct zx_vga_i2c {
  30         struct i2c_adapter adap;
  31         struct mutex lock;
  32 };
  33
  34 struct zx_vga {
  35         struct drm_connector connector;
  36         struct drm_encoder encoder;
  37         struct zx_vga_i2c *ddc;
  38         struct device *dev;
  39         void __iomem *mmio;
  40         struct clk *i2c_wclk;
  41         struct zx_vga_pwrctrl pwrctrl;
  42         struct completion complete;
  43         bool connected;
  44 };
  45
  46 #define to_zx_vga(x) container_of(x, struct zx_vga, x)
  47
  48 static void zx_vga_encoder_enable(struct drm_encoder *encoder)
  49 {
  50         struct zx_vga *vga = to_zx_vga(encoder);
  51         struct zx_vga_pwrctrl *pwrctrl = &vga->pwrctrl;
  52
  53         /* Set bit to power up VGA DACs */
  54         regmap_update_bits(pwrctrl->regmap, pwrctrl->reg, pwrctrl->mask,
  55                            pwrctrl->mask);
  56
  57         vou_inf_enable(VOU_VGA, encoder->crtc);
  58 }
  59
  60 static void zx_vga_encoder_disable(struct drm_encoder *encoder)
  61 {
  62         struct zx_vga *vga = to_zx_vga(encoder);
  63         struct zx_vga_pwrctrl *pwrctrl = &vga->pwrctrl;
  64
  65         vou_inf_disable(VOU_VGA, encoder->crtc);
  66
  67         /* Clear bit to power down VGA DACs */
  68         regmap_update_bits(pwrctrl->regmap, pwrctrl->reg, pwrctrl->mask, 0);
  69 }
  70
  71 static const struct drm_encoder_helper_funcs zx_vga_encoder_helper_funcs = {
  72         .enable = zx_vga_encoder_enable,
  73         .disable = zx_vga_encoder_disable,
  74 };
  75
  76 static const struct drm_encoder_funcs zx_vga_encoder_funcs = {
  77         .destroy = drm_encoder_cleanup,
  78 };
  79
  80 static int zx_vga_connector_get_modes(struct drm_connector *connector)
  81 {
  82         struct zx_vga *vga = to_zx_vga(connector);
  83         struct edid *edid;
  84         int ret;
  85
  86         /*
  87          * Clear both detection bits to switch I2C bus from device
  88          * detecting to EDID reading.
  89          */
  90         zx_writel(vga->mmio + VGA_AUTO_DETECT_SEL, 0);
  91
  92         edid = drm_get_edid(connector, &vga->ddc->adap);
  93         if (!edid) {
  94                 /*
  95                  * If EDID reading fails, we set the device state into
  96                  * disconnected.  Locking is not required here, since the
  97                  * VGA_AUTO_DETECT_SEL register write in irq handler cannot
  98                  * be triggered when both detection bits are cleared as above.
  99                  */
 100                 zx_writel(vga->mmio + VGA_AUTO_DETECT_SEL,
 101                           VGA_DETECT_SEL_NO_DEVICE);
 102                 vga->connected = false;
 103                 return 0;
 104         }
 105
 106         /*
 107          * As edid reading succeeds, device must be connected, so we set
 108          * up detection bit for unplug interrupt here.
 109          */
 110         zx_writel(vga->mmio + VGA_AUTO_DETECT_SEL, VGA_DETECT_SEL_HAS_DEVICE);
 111
 112         drm_mode_connector_update_edid_property(connector, edid);
 113         ret = drm_add_edid_modes(connector, edid);
 114         kfree(edid);
 115
 116         return ret;
 117 }
 118
 119 static enum drm_mode_status
 120 zx_vga_connector_mode_valid(struct drm_connector *connector,
 121                             struct drm_display_mode *mode)
 122 {
 123         return MODE_OK;
 124 }
 125
 126 static struct drm_connector_helper_funcs zx_vga_connector_helper_funcs = {
 127         .get_modes = zx_vga_connector_get_modes,
 128         .mode_valid = zx_vga_connector_mode_valid,
 129 };
 130
 131 static enum drm_connector_status
 132 zx_vga_connector_detect(struct drm_connector *connector, bool force)
 133 {
 134         struct zx_vga *vga = to_zx_vga(connector);
 135
 136         return vga->connected ? connector_status_connected :
 137                                 connector_status_disconnected;
 138 }
 139
 140 static const struct drm_connector_funcs zx_vga_connector_funcs = {
 141         .dpms = drm_atomic_helper_connector_dpms,
 142         .fill_modes = drm_helper_probe_single_connector_modes,
 143         .detect = zx_vga_connector_detect,
 144         .destroy = drm_connector_cleanup,
 145         .reset = drm_atomic_helper_connector_reset,
 146         .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
 147         .atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
 148 };
 149
 150 static int zx_vga_register(struct drm_device *drm, struct zx_vga *vga)
 151 {
 152         struct drm_encoder *encoder = &vga->encoder;
 153         struct drm_connector *connector = &vga->connector;
 154         struct device *dev = vga->dev;
 155         int ret;
 156
 157         encoder->possible_crtcs = VOU_CRTC_MASK;
 158
 159         ret = drm_encoder_init(drm, encoder, &zx_vga_encoder_funcs,
 160                                DRM_MODE_ENCODER_DAC, NULL);
 161         if (ret) {
 162                 DRM_DEV_ERROR(dev, "failed to init encoder: %d\n", ret);
 163                 return ret;
 164         };
 165
 166         drm_encoder_helper_add(encoder, &zx_vga_encoder_helper_funcs);
 167
 168         vga->connector.polled = DRM_CONNECTOR_POLL_HPD;
 169
 170         ret = drm_connector_init(drm, connector, &zx_vga_connector_funcs,
 171                                  DRM_MODE_CONNECTOR_VGA);
 172         if (ret) {
 173                 DRM_DEV_ERROR(dev, "failed to init connector: %d\n", ret);
 174                 goto clean_encoder;
 175         };
 176
 177         drm_connector_helper_add(connector, &zx_vga_connector_helper_funcs);
 178
 179         ret = drm_mode_connector_attach_encoder(connector, encoder);
 180         if (ret) {
 181                 DRM_DEV_ERROR(dev, "failed to attach encoder: %d\n", ret);
 182                 goto clean_connector;
 183         };
 184
 185         return 0;
 186
 187 clean_connector:
 188         drm_connector_cleanup(connector);
 189 clean_encoder:
 190         drm_encoder_cleanup(encoder);
 191         return ret;
 192 }
 193
 194 static int zx_vga_pwrctrl_init(struct zx_vga *vga)
 195 {
 196         struct zx_vga_pwrctrl *pwrctrl = &vga->pwrctrl;
 197         struct device *dev = vga->dev;
 198         struct of_phandle_args out_args;
 199         struct regmap *regmap;
 200         int ret;
 201
 202         ret = of_parse_phandle_with_fixed_args(dev->of_node,
 203                                 "zte,vga-power-control", 2, 0, &out_args);
 204         if (ret)
 205                 return ret;
 206
 207         regmap = syscon_node_to_regmap(out_args.np);
 208         if (IS_ERR(regmap)) {
 209                 ret = PTR_ERR(regmap);
 210                 goto out;
 211         }
 212
 213         pwrctrl->regmap = regmap;
 214         pwrctrl->reg = out_args.args[0];
 215         pwrctrl->mask = out_args.args[1];
 216
 217 out:
 218         of_node_put(out_args.np);
 219         return ret;
 220 }
 221
 222 static int zx_vga_i2c_read(struct zx_vga *vga, struct i2c_msg *msg)
 223 {
 224         int len = msg->len;
 225         u8 *buf = msg->buf;
 226         u32 offset = 0;
 227         int i;
 228
 229         reinit_completion(&vga->complete);
 230
 231         /* Select combo write */
 232         zx_writel_mask(vga->mmio + VGA_CMD_CFG, VGA_CMD_COMBO, VGA_CMD_COMBO);
 233         zx_writel_mask(vga->mmio + VGA_CMD_CFG, VGA_CMD_RW, 0);
 234
 235         while (len > 0) {
 236                 u32 cnt;
 237
 238                 /* Clear RX FIFO */
 239                 zx_writel_mask(vga->mmio + VGA_RXF_CTRL, VGA_RX_FIFO_CLEAR,
 240                                VGA_RX_FIFO_CLEAR);
 241
 242                 /* Data offset to read from */
 243                 zx_writel(vga->mmio + VGA_SUB_ADDR, offset);
 244
 245                 /* Kick off the transfer */
 246                 zx_writel_mask(vga->mmio + VGA_CMD_CFG, VGA_CMD_TRANS,
 247                                VGA_CMD_TRANS);
 248
 249                 if (!wait_for_completion_timeout(&vga->complete,
 250                                                  msecs_to_jiffies(1000))) {
 251                         DRM_DEV_ERROR(vga->dev, "transfer timeout\n");
 252                         return -ETIMEDOUT;
 253                 }
 254
 255                 cnt = zx_readl(vga->mmio + VGA_RXF_STATUS);
 256                 cnt = (cnt & VGA_RXF_COUNT_MASK) >> VGA_RXF_COUNT_SHIFT;
 257                 /* FIFO status may report more data than we need to read */
 258                 cnt = min_t(u32, len, cnt);
 259
 260                 for (i = 0; i < cnt; i++)
 261                         *buf++ = zx_readl(vga->mmio + VGA_DATA);
 262
 263                 len -= cnt;
 264                 offset += cnt;
 265         }
 266
 267         return 0;
 268 }
 269
 270 static int zx_vga_i2c_write(struct zx_vga *vga, struct i2c_msg *msg)
 271 {
 272         /*
 273          * The DDC I2C adapter is only for reading EDID data, so we assume
 274          * that the write to this adapter must be the EDID data offset.
 275          */
 276         if ((msg->len != 1) || ((msg->addr != DDC_ADDR)))
 277                 return -EINVAL;
 278
 279         /* Hardware will take care of the slave address shifting */
 280         zx_writel(vga->mmio + VGA_DEVICE_ADDR, msg->addr);
 281
 282         return 0;
 283 }
 284
 285 static int zx_vga_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
 286                            int num)
 287 {
 288         struct zx_vga *vga = i2c_get_adapdata(adap);
 289         struct zx_vga_i2c *ddc = vga->ddc;
 290         int ret = 0;
 291         int i;
 292
 293         mutex_lock(&ddc->lock);
 294
 295         for (i = 0; i < num; i++) {
 296                 if (msgs[i].flags & I2C_M_RD)
 297                         ret = zx_vga_i2c_read(vga, &msgs[i]);
 298                 else
 299                         ret = zx_vga_i2c_write(vga, &msgs[i]);
 300
 301                 if (ret < 0)
 302                         break;
 303         }
 304
 305         if (!ret)
 306                 ret = num;
 307
 308         mutex_unlock(&ddc->lock);
 309
 310         return ret;
 311 }
 312
 313 static u32 zx_vga_i2c_func(struct i2c_adapter *adapter)
 314 {
 315         return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
 316 }
 317
 318 static const struct i2c_algorithm zx_vga_algorithm = {
 319         .master_xfer    = zx_vga_i2c_xfer,
 320         .functionality  = zx_vga_i2c_func,
 321 };
 322
 323 static int zx_vga_ddc_register(struct zx_vga *vga)
 324 {
 325         struct device *dev = vga->dev;
 326         struct i2c_adapter *adap;
 327         struct zx_vga_i2c *ddc;
 328         int ret;
 329
 330         ddc = devm_kzalloc(dev, sizeof(*ddc), GFP_KERNEL);
 331         if (!ddc)
 332                 return -ENOMEM;
 333
 334         vga->ddc = ddc;
 335         mutex_init(&ddc->lock);
 336
 337         adap = &ddc->adap;
 338         adap->owner = THIS_MODULE;
 339         adap->class = I2C_CLASS_DDC;
 340         adap->dev.parent = dev;
 341         adap->algo = &zx_vga_algorithm;
 342         snprintf(adap->name, sizeof(adap->name), "zx vga i2c");
 343
 344         ret = i2c_add_adapter(adap);
 345         if (ret) {
 346                 DRM_DEV_ERROR(dev, "failed to add I2C adapter: %d\n", ret);
 347                 return ret;
 348         }
 349
 350         i2c_set_adapdata(adap, vga);
 351
 352         return 0;
 353 }
 354
 355 static irqreturn_t zx_vga_irq_thread(int irq, void *dev_id)
 356 {
 357         struct zx_vga *vga = dev_id;
 358
 359         drm_helper_hpd_irq_event(vga->connector.dev);
 360
 361         return IRQ_HANDLED;
 362 }
 363
 364 static irqreturn_t zx_vga_irq_handler(int irq, void *dev_id)
 365 {
 366         struct zx_vga *vga = dev_id;
 367         u32 status;
 368
 369         status = zx_readl(vga->mmio + VGA_I2C_STATUS);
 370
 371         /* Clear interrupt status */
 372         zx_writel_mask(vga->mmio + VGA_I2C_STATUS, VGA_CLEAR_IRQ,
 373                        VGA_CLEAR_IRQ);
 374
 375         if (status & VGA_DEVICE_CONNECTED) {
 376                 /*
 377                  * Since VGA_DETECT_SEL bits need to be reset for switching DDC
 378                  * bus from device detection to EDID read, rather than setting
 379                  * up HAS_DEVICE bit here, we need to do that in .get_modes
 380                  * hook for unplug detecting after EDID read succeeds.
 381                  */
 382                 vga->connected = true;
 383                 return IRQ_WAKE_THREAD;
 384         }
 385
 386         if (status & VGA_DEVICE_DISCONNECTED) {
 387                 zx_writel(vga->mmio + VGA_AUTO_DETECT_SEL,
 388                           VGA_DETECT_SEL_NO_DEVICE);
 389                 vga->connected = false;
 390                 return IRQ_WAKE_THREAD;
 391         }
 392
 393         if (status & VGA_TRANS_DONE) {
 394                 complete(&vga->complete);
 395                 return IRQ_HANDLED;
 396         }
 397
 398         return IRQ_NONE;
 399 }
 400
 401 static void zx_vga_hw_init(struct zx_vga *vga)
 402 {
 403         unsigned long ref = clk_get_rate(vga->i2c_wclk);
 404         int div;
 405
 406         /*
 407          * Set up I2C fast speed divider per formula below to get 400kHz.
 408          *   scl = ref / ((div + 1) * 4)
 409          */
 410         div = DIV_ROUND_UP(ref / 1000, 400 * 4) - 1;
 411         zx_writel(vga->mmio + VGA_CLK_DIV_FS, div);
 412
 413         /* Set up device detection */
 414         zx_writel(vga->mmio + VGA_AUTO_DETECT_PARA, 0x80);
 415         zx_writel(vga->mmio + VGA_AUTO_DETECT_SEL, VGA_DETECT_SEL_NO_DEVICE);
 416
 417         /*
 418          * We need to poke monitor via DDC bus to get connection irq
 419          * start working.
 420          */
 421         zx_writel(vga->mmio + VGA_DEVICE_ADDR, DDC_ADDR);
 422         zx_writel_mask(vga->mmio + VGA_CMD_CFG, VGA_CMD_TRANS, VGA_CMD_TRANS);
 423 }
 424
 425 static int zx_vga_bind(struct device *dev, struct device *master, void *data)
 426 {
 427         struct platform_device *pdev = to_platform_device(dev);
 428         struct drm_device *drm = data;
 429         struct resource *res;
 430         struct zx_vga *vga;
 431         int irq;
 432         int ret;
 433
 434         vga = devm_kzalloc(dev, sizeof(*vga), GFP_KERNEL);
 435         if (!vga)
 436                 return -ENOMEM;
 437
 438         vga->dev = dev;
 439         dev_set_drvdata(dev, vga);
 440
 441         res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 442         vga->mmio = devm_ioremap_resource(dev, res);
 443         if (IS_ERR(vga->mmio))
 444                 return PTR_ERR(vga->mmio);
 445
 446         irq = platform_get_irq(pdev, 0);
 447         if (irq < 0)
 448                 return irq;
 449
 450         vga->i2c_wclk = devm_clk_get(dev, "i2c_wclk");
 451         if (IS_ERR(vga->i2c_wclk)) {
 452                 ret = PTR_ERR(vga->i2c_wclk);
 453                 DRM_DEV_ERROR(dev, "failed to get i2c_wclk: %d\n", ret);
 454                 return ret;
 455         }
 456
 457         ret = zx_vga_pwrctrl_init(vga);
 458         if (ret) {
 459                 DRM_DEV_ERROR(dev, "failed to init power control: %d\n", ret);
 460                 return ret;
 461         }
 462
 463         ret = zx_vga_ddc_register(vga);
 464         if (ret) {
 465                 DRM_DEV_ERROR(dev, "failed to register ddc: %d\n", ret);
 466                 return ret;
 467         }
 468
 469         ret = zx_vga_register(drm, vga);
 470         if (ret) {
 471                 DRM_DEV_ERROR(dev, "failed to register vga: %d\n", ret);
 472                 return ret;
 473         }
 474
 475         init_completion(&vga->complete);
 476
 477         ret = devm_request_threaded_irq(dev, irq, zx_vga_irq_handler,
 478                                         zx_vga_irq_thread, IRQF_SHARED,
 479                                         dev_name(dev), vga);
 480         if (ret) {
 481                 DRM_DEV_ERROR(dev, "failed to request threaded irq: %d\n", ret);
 482                 return ret;
 483         }
 484
 485         ret = clk_prepare_enable(vga->i2c_wclk);
 486         if (ret)
 487                 return ret;
 488
 489         zx_vga_hw_init(vga);
 490
 491         return 0;
 492 }
 493
 494 static void zx_vga_unbind(struct device *dev, struct device *master,
 495                           void *data)
 496 {
 497         struct zx_vga *vga = dev_get_drvdata(dev);
 498
 499         clk_disable_unprepare(vga->i2c_wclk);
 500 }
 501
 502 static const struct component_ops zx_vga_component_ops = {
 503         .bind = zx_vga_bind,
 504         .unbind = zx_vga_unbind,
 505 };
 506
 507 static int zx_vga_probe(struct platform_device *pdev)
 508 {
 509         return component_add(&pdev->dev, &zx_vga_component_ops);
 510 }
 511
 512 static int zx_vga_remove(struct platform_device *pdev)
 513 {
 514         component_del(&pdev->dev, &zx_vga_component_ops);
 515         return 0;
 516 }
 517
 518 static const struct of_device_id zx_vga_of_match[] = {
 519         { .compatible = "zte,zx296718-vga", },
 520         { /* end */ },
 521 };
 522 MODULE_DEVICE_TABLE(of, zx_vga_of_match);
 523
 524 struct platform_driver zx_vga_driver = {
 525         .probe = zx_vga_probe,
 526         .remove = zx_vga_remove,
 527         .driver = {
 528                 .name = "zx-vga",
 529                 .of_match_table = zx_vga_of_match,
 530         },
 531 };