2 * Copyright (C) 2005-2016 Broadcom.
5 * This program is free software; you can redistribute it and/or
6 * modify it under the terms of the GNU General Public License version 2
7 * as published by the Free Software Foundation. The full GNU General
8 * Public License is included in this distribution in the file called COPYING.
10 * Contact Information:
11 * linux-drivers@emulex.com
15 * Costa Mesa, CA 92626
18 /********* Mailbox door bell *************/
19 /* Used for driver communication with the FW.
20 * The software must write this register twice to post any command. First,
21 * it writes the register with hi=1 and the upper bits of the physical address
22 * for the MAILBOX structure. Software must poll the ready bit until this
23 * is acknowledged. Then, sotware writes the register with hi=0 with the lower
24 * bits in the address. It must poll the ready bit until the command is
25 * complete. Upon completion, the MAILBOX will contain a valid completion
28 #define MPU_MAILBOX_DB_OFFSET 0x160
29 #define MPU_MAILBOX_DB_RDY_MASK 0x1 /* bit 0 */
30 #define MPU_MAILBOX_DB_HI_MASK 0x2 /* bit 1 */
32 #define MPU_EP_CONTROL 0
34 /********** MPU semphore: used for SH & BE *************/
35 #define SLIPORT_SOFTRESET_OFFSET 0x5c /* CSR BAR offset */
36 #define SLIPORT_SEMAPHORE_OFFSET_BEx 0xac /* CSR BAR offset */
37 #define SLIPORT_SEMAPHORE_OFFSET_SH 0x94 /* PCI-CFG offset */
38 #define POST_STAGE_MASK 0x0000FFFF
39 #define POST_ERR_MASK 0x1
40 #define POST_ERR_SHIFT 31
41 #define POST_ERR_RECOVERY_CODE_MASK 0xFFF
43 /* Soft Reset register masks */
44 #define SLIPORT_SOFTRESET_SR_MASK 0x00000080 /* SR bit */
46 /* MPU semphore POST stage values */
47 #define POST_STAGE_AWAITING_HOST_RDY 0x1 /* FW awaiting goahead from host */
48 #define POST_STAGE_HOST_RDY 0x2 /* Host has given go-ahed to FW */
49 #define POST_STAGE_BE_RESET 0x3 /* Host wants to reset chip */
50 #define POST_STAGE_ARMFW_RDY 0xc000 /* FW is done with POST */
51 #define POST_STAGE_RECOVERABLE_ERR 0xE000 /* Recoverable err detected */
52 /* FW has detected a UE and is dumping FAT log data */
53 #define POST_STAGE_FAT_LOG_START 0x0D00
54 #define POST_STAGE_ARMFW_UE 0xF000 /*FW has asserted an UE*/
56 /* Lancer SLIPORT registers */
57 #define SLIPORT_STATUS_OFFSET 0x404
58 #define SLIPORT_CONTROL_OFFSET 0x408
59 #define SLIPORT_ERROR1_OFFSET 0x40C
60 #define SLIPORT_ERROR2_OFFSET 0x410
61 #define PHYSDEV_CONTROL_OFFSET 0x414
63 #define SLIPORT_STATUS_ERR_MASK 0x80000000
64 #define SLIPORT_STATUS_DIP_MASK 0x02000000
65 #define SLIPORT_STATUS_RN_MASK 0x01000000
66 #define SLIPORT_STATUS_RDY_MASK 0x00800000
67 #define SLI_PORT_CONTROL_IP_MASK 0x08000000
68 #define PHYSDEV_CONTROL_FW_RESET_MASK 0x00000002
69 #define PHYSDEV_CONTROL_DD_MASK 0x00000004
70 #define PHYSDEV_CONTROL_INP_MASK 0x40000000
72 #define SLIPORT_ERROR_NO_RESOURCE1 0x2
73 #define SLIPORT_ERROR_NO_RESOURCE2 0x9
75 #define SLIPORT_ERROR_FW_RESET1 0x2
76 #define SLIPORT_ERROR_FW_RESET2 0x0
78 /********* Memory BAR register ************/
79 #define PCICFG_MEMBAR_CTRL_INT_CTRL_OFFSET 0xfc
80 /* Host Interrupt Enable, if set interrupts are enabled although "PCI Interrupt
81 * Disable" may still globally block interrupts in addition to individual
82 * interrupt masks; a mechanism for the device driver to block all interrupts
83 * atomically without having to arbitrate for the PCI Interrupt Disable bit
86 #define MEMBAR_CTRL_INT_CTRL_HOSTINTR_MASK BIT(29) /* bit 29 */
88 /********* PCI Function Capability *********/
89 #define BE_FUNCTION_CAPS_RSS 0x2
90 #define BE_FUNCTION_CAPS_SUPER_NIC 0x40
92 /********* Power management (WOL) **********/
93 #define PCICFG_PM_CONTROL_OFFSET 0x44
94 #define PCICFG_PM_CONTROL_MASK 0x108 /* bits 3 & 8 */
96 /********* Online Control Registers *******/
97 #define PCICFG_ONLINE0 0xB0
98 #define PCICFG_ONLINE1 0xB4
100 /********* UE Status and Mask Registers ***/
101 #define PCICFG_UE_STATUS_LOW 0xA0
102 #define PCICFG_UE_STATUS_HIGH 0xA4
103 #define PCICFG_UE_STATUS_LOW_MASK 0xA8
104 #define PCICFG_UE_STATUS_HI_MASK 0xAC
106 /******** SLI_INTF ***********************/
107 #define SLI_INTF_REG_OFFSET 0x58
108 #define SLI_INTF_VALID_MASK 0xE0000000
109 #define SLI_INTF_VALID 0xC0000000
110 #define SLI_INTF_HINT2_MASK 0x1F000000
111 #define SLI_INTF_HINT2_SHIFT 24
112 #define SLI_INTF_HINT1_MASK 0x00FF0000
113 #define SLI_INTF_HINT1_SHIFT 16
114 #define SLI_INTF_FAMILY_MASK 0x00000F00
115 #define SLI_INTF_FAMILY_SHIFT 8
116 #define SLI_INTF_IF_TYPE_MASK 0x0000F000
117 #define SLI_INTF_IF_TYPE_SHIFT 12
118 #define SLI_INTF_REV_MASK 0x000000F0
119 #define SLI_INTF_REV_SHIFT 4
120 #define SLI_INTF_FT_MASK 0x00000001
122 #define SLI_INTF_TYPE_2 2
123 #define SLI_INTF_TYPE_3 3
125 /********* ISR0 Register offset **********/
126 #define CEV_ISR0_OFFSET 0xC18
127 #define CEV_ISR_SIZE 4
129 /********* Event Q door bell *************/
130 #define DB_EQ_OFFSET DB_CQ_OFFSET
131 #define DB_EQ_RING_ID_MASK 0x1FF /* bits 0 - 8 */
132 #define DB_EQ_RING_ID_EXT_MASK 0x3e00 /* bits 9-13 */
133 #define DB_EQ_RING_ID_EXT_MASK_SHIFT (2) /* qid bits 9-13 placing at 11-15 */
135 /* Clear the interrupt for this eq */
136 #define DB_EQ_CLR_SHIFT (9) /* bit 9 */
138 #define DB_EQ_EVNT_SHIFT (10) /* bit 10 */
139 /* Number of event entries processed */
140 #define DB_EQ_NUM_POPPED_SHIFT (16) /* bits 16 - 28 */
142 #define DB_EQ_REARM_SHIFT (29) /* bit 29 */
143 /* Rearm to interrupt delay encoding */
144 #define DB_EQ_R2I_DLY_SHIFT (30) /* bits 30 - 31 */
146 /* Rearm to interrupt (R2I) delay multiplier encoding represents 3 different
147 * values configured in CEV_REARM2IRPT_DLY_MULT_CSR register. This value is
148 * programmed by host driver while ringing an EQ doorbell(EQ_DB) if a delay
149 * between rearming the EQ and next interrupt on this EQ is desired.
151 #define R2I_DLY_ENC_0 0 /* No delay */
152 #define R2I_DLY_ENC_1 1 /* maps to 160us EQ delay */
153 #define R2I_DLY_ENC_2 2 /* maps to 96us EQ delay */
154 #define R2I_DLY_ENC_3 3 /* maps to 48us EQ delay */
156 /********* Compl Q door bell *************/
157 #define DB_CQ_OFFSET 0x120
158 #define DB_CQ_RING_ID_MASK 0x3FF /* bits 0 - 9 */
159 #define DB_CQ_RING_ID_EXT_MASK 0x7C00 /* bits 10-14 */
160 #define DB_CQ_RING_ID_EXT_MASK_SHIFT (1) /* qid bits 10-14
163 /* Number of event entries processed */
164 #define DB_CQ_NUM_POPPED_SHIFT (16) /* bits 16 - 28 */
166 #define DB_CQ_REARM_SHIFT (29) /* bit 29 */
168 /********** TX ULP door bell *************/
169 #define DB_TXULP1_OFFSET 0x60
170 #define DB_TXULP_RING_ID_MASK 0x7FF /* bits 0 - 10 */
171 /* Number of tx entries posted */
172 #define DB_TXULP_NUM_POSTED_SHIFT (16) /* bits 16 - 29 */
173 #define DB_TXULP_NUM_POSTED_MASK 0x3FFF /* bits 16 - 29 */
175 /********** RQ(erx) door bell ************/
176 #define DB_RQ_OFFSET 0x100
177 #define DB_RQ_RING_ID_MASK 0x3FF /* bits 0 - 9 */
178 /* Number of rx frags posted */
179 #define DB_RQ_NUM_POSTED_SHIFT (24) /* bits 24 - 31 */
181 /********** MCC door bell ************/
182 #define DB_MCCQ_OFFSET 0x140
183 #define DB_MCCQ_RING_ID_MASK 0x7FF /* bits 0 - 10 */
184 /* Number of entries posted */
185 #define DB_MCCQ_NUM_POSTED_SHIFT (16) /* bits 16 - 29 */
187 /********** SRIOV VF PCICFG OFFSET ********/
188 #define SRIOV_VF_PCICFG_OFFSET (4096)
190 /********** FAT TABLE ********/
191 #define RETRIEVE_FAT 0
194 /************* Rx Packet Type Encoding **************/
195 #define BE_UNICAST_PACKET 0
196 #define BE_MULTICAST_PACKET 1
197 #define BE_BROADCAST_PACKET 2
198 #define BE_RSVD_PACKET 3
201 * BE descriptors: host memory data structures whose formats
202 * are hardwired in BE silicon.
204 /* Event Queue Descriptor */
205 #define EQ_ENTRY_VALID_MASK 0x1 /* bit 0 */
206 #define EQ_ENTRY_RES_ID_MASK 0xFFFF /* bits 16 - 31 */
207 #define EQ_ENTRY_RES_ID_SHIFT 16
213 /* TX Queue Descriptor */
214 #define ETH_WRB_FRAG_LEN_MASK 0xFFFF
216 __le32 frag_pa_hi
; /* dword 0 */
217 __le32 frag_pa_lo
; /* dword 1 */
218 u32 rsvd0
; /* dword 2 */
219 __le32 frag_len
; /* dword 3: bits 0 - 15 */
222 /* Pseudo amap definition for eth_hdr_wrb in which each bit of the
223 * actual structure is defined as a byte : used to calculate
224 * offset/shift/mask of each field */
225 struct amap_eth_hdr_wrb
{
226 u8 rsvd0
[32]; /* dword 0 */
227 u8 rsvd1
[32]; /* dword 1 */
228 u8 complete
; /* dword 2 */
242 u8 len
[16]; /* dword 3 */
246 #define TX_HDR_WRB_COMPL 1 /* word 2 */
247 #define TX_HDR_WRB_EVT BIT(1) /* word 2 */
248 #define TX_HDR_WRB_NUM_SHIFT 13 /* word 2: bits 13:17 */
249 #define TX_HDR_WRB_NUM_MASK 0x1F /* word 2: bits 13:17 */
251 struct be_eth_hdr_wrb
{
255 /********* Tx Compl Status Encoding *********/
256 #define BE_TX_COMP_HDR_PARSE_ERR 0x2
257 #define BE_TX_COMP_NDMA_ERR 0x3
258 #define BE_TX_COMP_ACL_ERR 0x5
260 #define LANCER_TX_COMP_LSO_ERR 0x1
261 #define LANCER_TX_COMP_HSW_DROP_MAC_ERR 0x3
262 #define LANCER_TX_COMP_HSW_DROP_VLAN_ERR 0x5
263 #define LANCER_TX_COMP_QINQ_ERR 0x7
264 #define LANCER_TX_COMP_PARITY_ERR 0xb
265 #define LANCER_TX_COMP_DMA_ERR 0xd
267 /* TX Compl Queue Descriptor */
269 /* Pseudo amap definition for eth_tx_compl in which each bit of the
270 * actual structure is defined as a byte: used to calculate
271 * offset/shift/mask of each field */
272 struct amap_eth_tx_compl
{
273 u8 wrb_index
[16]; /* dword 0 */
274 u8 ct
[2]; /* dword 0 */
275 u8 port
[2]; /* dword 0 */
276 u8 rsvd0
[8]; /* dword 0 */
277 u8 status
[4]; /* dword 0 */
278 u8 user_bytes
[16]; /* dword 1 */
279 u8 nwh_bytes
[8]; /* dword 1 */
280 u8 lso
; /* dword 1 */
281 u8 cast_enc
[2]; /* dword 1 */
282 u8 rsvd1
[5]; /* dword 1 */
283 u8 rsvd2
[32]; /* dword 2 */
284 u8 pkts
[16]; /* dword 3 */
285 u8 ringid
[11]; /* dword 3 */
286 u8 hash_val
[4]; /* dword 3 */
287 u8 valid
; /* dword 3 */
290 struct be_eth_tx_compl
{
294 /* RX Queue Descriptor */
300 /* RX Compl Queue Descriptor */
302 /* Pseudo amap definition for BE2 and BE3 legacy mode eth_rx_compl in which
303 * each bit of the actual structure is defined as a byte: used to calculate
304 * offset/shift/mask of each field */
305 struct amap_eth_rx_compl_v0
{
306 u8 vlan_tag
[16]; /* dword 0 */
307 u8 pktsize
[14]; /* dword 0 */
308 u8 port
; /* dword 0 */
309 u8 ip_opt
; /* dword 0 */
310 u8 err
; /* dword 1 */
311 u8 rsshp
; /* dword 1 */
312 u8 ipf
; /* dword 1 */
313 u8 tcpf
; /* dword 1 */
314 u8 udpf
; /* dword 1 */
315 u8 ipcksm
; /* dword 1 */
316 u8 l4_cksm
; /* dword 1 */
317 u8 ip_version
; /* dword 1 */
318 u8 macdst
[6]; /* dword 1 */
319 u8 vtp
; /* dword 1 */
320 u8 ip_frag
; /* dword 1 */
321 u8 fragndx
[10]; /* dword 1 */
322 u8 ct
[2]; /* dword 1 */
324 u8 numfrags
[3]; /* dword 1 */
325 u8 rss_flush
; /* dword 2 */
326 u8 cast_enc
[2]; /* dword 2 */
327 u8 qnq
; /* dword 2 */
328 u8 rss_bank
; /* dword 2 */
329 u8 rsvd1
[23]; /* dword 2 */
330 u8 lro_pkt
; /* dword 2 */
331 u8 rsvd2
[2]; /* dword 2 */
332 u8 valid
; /* dword 2 */
333 u8 rsshash
[32]; /* dword 3 */
336 /* Pseudo amap definition for BE3 native mode eth_rx_compl in which
337 * each bit of the actual structure is defined as a byte: used to calculate
338 * offset/shift/mask of each field */
339 struct amap_eth_rx_compl_v1
{
340 u8 vlan_tag
[16]; /* dword 0 */
341 u8 pktsize
[14]; /* dword 0 */
342 u8 vtp
; /* dword 0 */
343 u8 ip_opt
; /* dword 0 */
344 u8 err
; /* dword 1 */
345 u8 rsshp
; /* dword 1 */
346 u8 ipf
; /* dword 1 */
347 u8 tcpf
; /* dword 1 */
348 u8 udpf
; /* dword 1 */
349 u8 ipcksm
; /* dword 1 */
350 u8 l4_cksm
; /* dword 1 */
351 u8 ip_version
; /* dword 1 */
352 u8 macdst
[7]; /* dword 1 */
353 u8 rsvd0
; /* dword 1 */
354 u8 fragndx
[10]; /* dword 1 */
355 u8 ct
[2]; /* dword 1 */
357 u8 numfrags
[3]; /* dword 1 */
358 u8 rss_flush
; /* dword 2 */
359 u8 cast_enc
[2]; /* dword 2 */
360 u8 qnq
; /* dword 2 */
361 u8 rss_bank
; /* dword 2 */
362 u8 port
[2]; /* dword 2 */
363 u8 vntagp
; /* dword 2 */
364 u8 header_len
[8]; /* dword 2 */
365 u8 header_split
[2]; /* dword 2 */
366 u8 rsvd1
[12]; /* dword 2 */
368 u8 valid
; /* dword 2 */
369 u8 rsshash
[32]; /* dword 3 */
372 struct be_eth_rx_compl
{