2 * Copyright (C) 2000-2003 Axis Communications AB
4 * Authors: Bjorn Wesen (bjornw@axis.com)
5 * Mikael Starvik (starvik@axis.com)
6 * Tobias Anderberg (tobiasa@axis.com), CRISv32 port.
8 * This file handles the architecture-dependent parts of process handling..
11 #include <linux/sched.h>
12 #include <linux/slab.h>
13 #include <linux/err.h>
15 #include <hwregs/reg_rdwr.h>
16 #include <hwregs/reg_map.h>
17 #include <hwregs/timer_defs.h>
18 #include <hwregs/intr_vect_defs.h>
20 extern void stop_watchdog(void);
22 extern int cris_hlt_counter
;
24 /* We use this if we don't have any better idle routine. */
25 void default_idle(void)
28 if (!need_resched() && !cris_hlt_counter
) {
29 /* Halt until exception. */
30 __asm__
volatile("ei \n\t"
37 * Free current thread data structures etc..
40 extern void deconfigure_bp(long pid
);
41 void exit_thread(void)
43 deconfigure_bp(current
->pid
);
47 * If the watchdog is enabled, disable interrupts and enter an infinite loop.
48 * The watchdog will reset the CPU after 0.1s. If the watchdog isn't enabled
49 * then enable it and wait.
51 extern void arch_enable_nmi(void);
57 * Don't declare this variable elsewhere. We don't want any other
58 * code to know about it than the watchdog handler in entry.S and
59 * this code, implementing hard reset through the watchdog.
61 #if defined(CONFIG_ETRAX_WATCHDOG)
62 extern int cause_of_death
;
65 printk("*** HARD RESET ***\n");
68 #if defined(CONFIG_ETRAX_WATCHDOG)
69 cause_of_death
= 0xbedead;
72 reg_timer_rw_wd_ctrl wd_ctrl
= {0};
76 wd_ctrl
.key
= 16; /* Arbitrary key. */
77 wd_ctrl
.cnt
= 1; /* Minimum time. */
78 wd_ctrl
.cmd
= regk_timer_start
;
81 REG_WR(timer
, regi_timer0
, rw_wd_ctrl
, wd_ctrl
);
86 ; /* Wait for reset. */
90 * Return saved PC of a blocked thread.
92 unsigned long thread_saved_pc(struct task_struct
*t
)
94 return task_pt_regs(t
)->erp
;
98 kernel_thread_helper(void* dummy
, int (*fn
)(void *), void * arg
)
101 do_exit(-1); /* Should never be called, return bad exit value. */
104 /* Create a kernel thread. */
106 kernel_thread(int (*fn
)(void *), void * arg
, unsigned long flags
)
110 memset(®s
, 0, sizeof(regs
));
112 /* Don't use r10 since that is set to 0 in copy_thread. */
113 regs
.r11
= (unsigned long) fn
;
114 regs
.r12
= (unsigned long) arg
;
115 regs
.erp
= (unsigned long) kernel_thread_helper
;
116 regs
.ccs
= 1 << (I_CCS_BITNR
+ CCS_SHIFT
);
118 /* Create the new process. */
119 return do_fork(flags
| CLONE_VM
| CLONE_UNTRACED
, 0, ®s
, 0, NULL
, NULL
);
123 * Setup the child's kernel stack with a pt_regs and call switch_stack() on it.
124 * It will be unnested during _resume and _ret_from_sys_call when the new thread
127 * Also setup the thread switching structure which is used to keep
128 * thread-specific data during _resumes.
131 extern asmlinkage
void ret_from_fork(void);
134 copy_thread(unsigned long clone_flags
, unsigned long usp
,
135 unsigned long unused
,
136 struct task_struct
*p
, struct pt_regs
*regs
)
138 struct pt_regs
*childregs
;
139 struct switch_stack
*swstack
;
142 * Put the pt_regs structure at the end of the new kernel stack page and
143 * fix it up. Note: the task_struct doubles as the kernel stack for the
146 childregs
= task_pt_regs(p
);
147 *childregs
= *regs
; /* Struct copy of pt_regs. */
148 p
->set_child_tid
= p
->clear_child_tid
= NULL
;
149 childregs
->r10
= 0; /* Child returns 0 after a fork/clone. */
152 * The TLS is in $mof because it is the 5th argument to sys_clone.
154 if (p
->mm
&& (clone_flags
& CLONE_SETTLS
)) {
155 task_thread_info(p
)->tls
= regs
->mof
;
158 /* Put the switch stack right below the pt_regs. */
159 swstack
= ((struct switch_stack
*) childregs
) - 1;
161 /* Parameter to ret_from_sys_call. 0 is don't restart the syscall. */
165 * We want to return into ret_from_sys_call after the _resume.
166 * ret_from_fork will call ret_from_sys_call.
168 swstack
->return_ip
= (unsigned long) ret_from_fork
;
170 /* Fix the user-mode and kernel-mode stackpointer. */
172 p
->thread
.ksp
= (unsigned long) swstack
;
178 * Be aware of the "magic" 7th argument in the four system-calls below.
179 * They need the latest stackframe, which is put as the 7th argument by
180 * entry.S. The previous arguments are dummies or actually used, but need
181 * to be defined to reach the 7th argument.
183 * N.B.: Another method to get the stackframe is to use current_regs(). But
184 * it returns the latest stack-frame stacked when going from _user mode_ and
185 * some of these (at least sys_clone) are called from kernel-mode sometimes
186 * (for example during kernel_thread, above) and thus cannot use it. Thus,
187 * to be sure not to get any surprises, we use the method for the other calls
191 sys_fork(long r10
, long r11
, long r12
, long r13
, long mof
, long srp
,
192 struct pt_regs
*regs
)
194 return do_fork(SIGCHLD
, rdusp(), regs
, 0, NULL
, NULL
);
197 /* FIXME: Is parent_tid/child_tid really third/fourth argument? Update lib? */
199 sys_clone(unsigned long newusp
, unsigned long flags
, int *parent_tid
, int *child_tid
,
200 unsigned long tls
, long srp
, struct pt_regs
*regs
)
205 return do_fork(flags
, newusp
, regs
, 0, parent_tid
, child_tid
);
209 * vfork is a system call in i386 because of register-pressure - maybe
210 * we can remove it and handle it in libc but we put it here until then.
213 sys_vfork(long r10
, long r11
, long r12
, long r13
, long mof
, long srp
,
214 struct pt_regs
*regs
)
216 return do_fork(CLONE_VFORK
| CLONE_VM
| SIGCHLD
, rdusp(), regs
, 0, NULL
, NULL
);
219 /* sys_execve() executes a new program. */
221 sys_execve(const char *fname
,
222 const char *const *argv
,
223 const char *const *envp
, long r13
, long mof
, long srp
,
224 struct pt_regs
*regs
)
229 filename
= getname(fname
);
230 error
= PTR_ERR(filename
);
232 if (IS_ERR(filename
))
235 error
= do_execve(filename
, argv
, envp
, regs
);
242 get_wchan(struct task_struct
*p
)
250 void show_regs(struct pt_regs
* regs
)
252 unsigned long usp
= rdusp();
253 printk("ERP: %08lx SRP: %08lx CCS: %08lx USP: %08lx MOF: %08lx\n",
254 regs
->erp
, regs
->srp
, regs
->ccs
, usp
, regs
->mof
);
256 printk(" r0: %08lx r1: %08lx r2: %08lx r3: %08lx\n",
257 regs
->r0
, regs
->r1
, regs
->r2
, regs
->r3
);
259 printk(" r4: %08lx r5: %08lx r6: %08lx r7: %08lx\n",
260 regs
->r4
, regs
->r5
, regs
->r6
, regs
->r7
);
262 printk(" r8: %08lx r9: %08lx r10: %08lx r11: %08lx\n",
263 regs
->r8
, regs
->r9
, regs
->r10
, regs
->r11
);
265 printk("r12: %08lx r13: %08lx oR10: %08lx\n",
266 regs
->r12
, regs
->r13
, regs
->orig_r10
);