sfc: Create multiple TX queues
[linux/fpc-iii.git] / drivers / net / bmac.h
bloba1d19d867ba57261057bcd8642831829bc16d13d
1 /*
2 * mace.h - definitions for the registers in the "Big Mac"
3 * Ethernet controller found in PowerMac G3 models.
5 * Copyright (C) 1998 Randy Gobbel.
7 * This program is free software; you can redistribute it and/or
8 * modify it under the terms of the GNU General Public License
9 * as published by the Free Software Foundation; either version
10 * 2 of the License, or (at your option) any later version.
13 /* The "Big MAC" appears to have some parts in common with the Sun "Happy Meal"
14 * (HME) controller. See sunhme.h
18 /* register offsets */
20 /* global status and control */
21 #define XIFC 0x000 /* low-level interface control */
22 # define TxOutputEnable 0x0001 /* output driver enable */
23 # define XIFLoopback 0x0002 /* Loopback-mode XIF enable */
24 # define MIILoopback 0x0004 /* Loopback-mode MII enable */
25 # define MIILoopbackBits 0x0006
26 # define MIIBuffDisable 0x0008 /* MII receive buffer disable */
27 # define SQETestEnable 0x0010 /* SQE test enable */
28 # define SQETimeWindow 0x03e0 /* SQE time window */
29 # define XIFLanceMode 0x0010 /* Lance mode enable */
30 # define XIFLanceIPG0 0x03e0 /* Lance mode IPG0 */
31 #define TXFIFOCSR 0x100 /* transmit FIFO control */
32 # define TxFIFOEnable 0x0001
33 #define TXTH 0x110 /* transmit threshold */
34 # define TxThreshold 0x0004
35 #define RXFIFOCSR 0x120 /* receive FIFO control */
36 # define RxFIFOEnable 0x0001
37 #define MEMADD 0x130 /* memory address, unknown function */
38 #define MEMDATAHI 0x140 /* memory data high, presently unused in driver */
39 #define MEMDATALO 0x150 /* memory data low, presently unused in driver */
40 #define XCVRIF 0x160 /* transceiver interface control */
41 # define COLActiveLow 0x0002
42 # define SerialMode 0x0004
43 # define ClkBit 0x0008
44 # define LinkStatus 0x0100
45 #define CHIPID 0x170 /* chip ID */
46 #define MIFCSR 0x180 /* ??? */
47 #define SROMCSR 0x190 /* SROM control */
48 # define ChipSelect 0x0001
49 # define Clk 0x0002
50 #define TXPNTR 0x1a0 /* transmit pointer */
51 #define RXPNTR 0x1b0 /* receive pointer */
52 #define STATUS 0x200 /* status--reading this clears it */
53 #define INTDISABLE 0x210 /* interrupt enable/disable control */
54 /* bits below are the same in both STATUS and INTDISABLE registers */
55 # define FrameReceived 0x00000001 /* Received a frame */
56 # define RxFrameCntExp 0x00000002 /* Receive frame counter expired */
57 # define RxAlignCntExp 0x00000004 /* Align-error counter expired */
58 # define RxCRCCntExp 0x00000008 /* CRC-error counter expired */
59 # define RxLenCntExp 0x00000010 /* Length-error counter expired */
60 # define RxOverFlow 0x00000020 /* Receive FIFO overflow */
61 # define RxCodeViolation 0x00000040 /* Code-violation counter expired */
62 # define SQETestError 0x00000080 /* Test error in XIF for SQE */
63 # define FrameSent 0x00000100 /* Transmitted a frame */
64 # define TxUnderrun 0x00000200 /* Transmit FIFO underrun */
65 # define TxMaxSizeError 0x00000400 /* Max-packet size error */
66 # define TxNormalCollExp 0x00000800 /* Normal-collision counter expired */
67 # define TxExcessCollExp 0x00001000 /* Excess-collision counter expired */
68 # define TxLateCollExp 0x00002000 /* Late-collision counter expired */
69 # define TxNetworkCollExp 0x00004000 /* First-collision counter expired */
70 # define TxDeferTimerExp 0x00008000 /* Defer-timer expired */
71 # define RxFIFOToHost 0x00010000 /* Data moved from FIFO to host */
72 # define RxNoDescriptors 0x00020000 /* No more receive descriptors */
73 # define RxDMAError 0x00040000 /* Error during receive DMA */
74 # define RxDMALateErr 0x00080000 /* Receive DMA, data late */
75 # define RxParityErr 0x00100000 /* Parity error during receive DMA */
76 # define RxTagError 0x00200000 /* Tag error during receive DMA */
77 # define TxEOPError 0x00400000 /* Tx descriptor did not have EOP set */
78 # define MIFIntrEvent 0x00800000 /* MIF is signaling an interrupt */
79 # define TxHostToFIFO 0x01000000 /* Data moved from host to FIFO */
80 # define TxFIFOAllSent 0x02000000 /* Transmitted all packets in FIFO */
81 # define TxDMAError 0x04000000 /* Error during transmit DMA */
82 # define TxDMALateError 0x08000000 /* Late error during transmit DMA */
83 # define TxParityError 0x10000000 /* Parity error during transmit DMA */
84 # define TxTagError 0x20000000 /* Tag error during transmit DMA */
85 # define PIOError 0x40000000 /* PIO access got an error */
86 # define PIOParityError 0x80000000 /* PIO access got a parity error */
87 # define DisableAll 0xffffffff
88 # define EnableAll 0x00000000
89 /* # define NormalIntEvents ~(FrameReceived | FrameSent | TxUnderrun) */
90 # define EnableNormal ~(FrameReceived | FrameSent)
91 # define EnableErrors (FrameReceived | FrameSent)
92 # define RxErrorMask (RxFrameCntExp | RxAlignCntExp | RxCRCCntExp | \
93 RxLenCntExp | RxOverFlow | RxCodeViolation)
94 # define TxErrorMask (TxUnderrun | TxMaxSizeError | TxExcessCollExp | \
95 TxLateCollExp | TxNetworkCollExp | TxDeferTimerExp)
97 /* transmit control */
98 #define TXRST 0x420 /* transmit reset */
99 # define TxResetBit 0x0001
100 #define TXCFG 0x430 /* transmit configuration control*/
101 # define TxMACEnable 0x0001 /* output driver enable */
102 # define TxSlowMode 0x0020 /* enable slow mode */
103 # define TxIgnoreColl 0x0040 /* ignore transmit collisions */
104 # define TxNoFCS 0x0080 /* do not emit FCS */
105 # define TxNoBackoff 0x0100 /* no backoff in case of collisions */
106 # define TxFullDuplex 0x0200 /* enable full-duplex */
107 # define TxNeverGiveUp 0x0400 /* don't give up on transmits */
108 #define IPG1 0x440 /* Inter-packet gap 1 */
109 #define IPG2 0x450 /* Inter-packet gap 2 */
110 #define ALIMIT 0x460 /* Transmit attempt limit */
111 #define SLOT 0x470 /* Transmit slot time */
112 #define PALEN 0x480 /* Size of transmit preamble */
113 #define PAPAT 0x490 /* Pattern for transmit preamble */
114 #define TXSFD 0x4a0 /* Transmit frame delimiter */
115 #define JAM 0x4b0 /* Jam size */
116 #define TXMAX 0x4c0 /* Transmit max pkt size */
117 #define TXMIN 0x4d0 /* Transmit min pkt size */
118 #define PAREG 0x4e0 /* Count of transmit peak attempts */
119 #define DCNT 0x4f0 /* Transmit defer timer */
120 #define NCCNT 0x500 /* Transmit normal-collision counter */
121 #define NTCNT 0x510 /* Transmit first-collision counter */
122 #define EXCNT 0x520 /* Transmit excess-collision counter */
123 #define LTCNT 0x530 /* Transmit late-collision counter */
124 #define RSEED 0x540 /* Transmit random number seed */
125 #define TXSM 0x550 /* Transmit state machine */
127 /* receive control */
128 #define RXRST 0x620 /* receive reset */
129 # define RxResetValue 0x0000
130 #define RXCFG 0x630 /* receive configuration control */
131 # define RxMACEnable 0x0001 /* receiver overall enable */
132 # define RxCFGReserved 0x0004
133 # define RxPadStripEnab 0x0020 /* enable pad byte stripping */
134 # define RxPromiscEnable 0x0040 /* turn on promiscuous mode */
135 # define RxNoErrCheck 0x0080 /* disable receive error checking */
136 # define RxCRCNoStrip 0x0100 /* disable auto-CRC-stripping */
137 # define RxRejectOwnPackets 0x0200 /* don't receive our own packets */
138 # define RxGrpPromisck 0x0400 /* enable group promiscuous mode */
139 # define RxHashFilterEnable 0x0800 /* enable hash filter */
140 # define RxAddrFilterEnable 0x1000 /* enable address filter */
141 #define RXMAX 0x640 /* Max receive packet size */
142 #define RXMIN 0x650 /* Min receive packet size */
143 #define MADD2 0x660 /* our enet address, high part */
144 #define MADD1 0x670 /* our enet address, middle part */
145 #define MADD0 0x680 /* our enet address, low part */
146 #define FRCNT 0x690 /* receive frame counter */
147 #define LECNT 0x6a0 /* Receive excess length error counter */
148 #define AECNT 0x6b0 /* Receive misaligned error counter */
149 #define FECNT 0x6c0 /* Receive CRC error counter */
150 #define RXSM 0x6d0 /* Receive state machine */
151 #define RXCV 0x6e0 /* Receive code violation */
153 #define BHASH3 0x700 /* multicast hash register */
154 #define BHASH2 0x710 /* multicast hash register */
155 #define BHASH1 0x720 /* multicast hash register */
156 #define BHASH0 0x730 /* multicast hash register */
158 #define AFR2 0x740 /* address filtering setup? */
159 #define AFR1 0x750 /* address filtering setup? */
160 #define AFR0 0x760 /* address filtering setup? */
161 #define AFCR 0x770 /* address filter compare register? */
162 # define EnableAllCompares 0x0fff
164 /* bits in XIFC */