Documentation/DocBook/mtdnand.tmpl

   1 <?xml version="1.0" encoding="UTF-8"?>
   2 <!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.1.2//EN"
   3         "http://www.oasis-open.org/docbook/xml/4.1.2/docbookx.dtd" []>
   4
   5 <book id="MTD-NAND-Guide">
   6  <bookinfo>
   7   <title>MTD NAND Driver Programming Interface</title>
   8
   9   <authorgroup>
  10    <author>
  11     <firstname>Thomas</firstname>
  12     <surname>Gleixner</surname>
  13     <affiliation>
  14      <address>
  15       <email>tglx@linutronix.de</email>
  16      </address>
  17     </affiliation>
  18    </author>
  19   </authorgroup>
  20
  21   <copyright>
  22    <year>2004</year>
  23    <holder>Thomas Gleixner</holder>
  24   </copyright>
  25
  26   <legalnotice>
  27    <para>
  28      This documentation is free software; you can redistribute
  29      it and/or modify it under the terms of the GNU General Public
  30      License version 2 as published by the Free Software Foundation.
  31    </para>
  32
  33    <para>
  34      This program is distributed in the hope that it will be
  35      useful, but WITHOUT ANY WARRANTY; without even the implied
  36      warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
  37      See the GNU General Public License for more details.
  38    </para>
  39
  40    <para>
  41      You should have received a copy of the GNU General Public
  42      License along with this program; if not, write to the Free
  43      Software Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  44      MA 02111-1307 USA
  45    </para>
  46
  47    <para>
  48      For more details see the file COPYING in the source
  49      distribution of Linux.
  50    </para>
  51   </legalnotice>
  52  </bookinfo>
  53
  54 <toc></toc>
  55
  56   <chapter id="intro">
  57       <title>Introduction</title>
  58   <para>
  59         The generic NAND driver supports almost all NAND and AG-AND based
  60         chips and connects them to the Memory Technology Devices (MTD)
  61         subsystem of the Linux Kernel.
  62   </para>
  63   <para>
  64         This documentation is provided for developers who want to implement
  65         board drivers or filesystem drivers suitable for NAND devices.
  66   </para>
  67   </chapter>
  68
  69   <chapter id="bugs">
  70      <title>Known Bugs And Assumptions</title>
  71   <para>
  72         None.
  73   </para>
  74   </chapter>
  75
  76   <chapter id="dochints">
  77      <title>Documentation hints</title>
  78      <para>
  79      The function and structure docs are autogenerated. Each function and
  80      struct member has a short description which is marked with an [XXX] identifier.
  81      The following chapters explain the meaning of those identifiers.
  82      </para>
  83      <sect1 id="Function_identifiers_XXX">
  84         <title>Function identifiers [XXX]</title>
  85         <para>
  86         The functions are marked with [XXX] identifiers in the short
  87         comment. The identifiers explain the usage and scope of the
  88         functions. Following identifiers are used:
  89         </para>
  90         <itemizedlist>
  91                 <listitem><para>
  92                 [MTD Interface]</para><para>
  93                 These functions provide the interface to the MTD kernel API.
  94                 They are not replacable and provide functionality
  95                 which is complete hardware independent.
  96                 </para></listitem>
  97                 <listitem><para>
  98                 [NAND Interface]</para><para>
  99                 These functions are exported and provide the interface to the NAND kernel API.
 100                 </para></listitem>
 101                 <listitem><para>
 102                 [GENERIC]</para><para>
 103                 Generic functions are not replacable and provide functionality
 104                 which is complete hardware independent.
 105                 </para></listitem>
 106                 <listitem><para>
 107                 [DEFAULT]</para><para>
 108                 Default functions provide hardware related functionality which is suitable
 109                 for most of the implementations. These functions can be replaced by the
 110                 board driver if neccecary. Those functions are called via pointers in the
 111                 NAND chip description structure. The board driver can set the functions which
 112                 should be replaced by board dependent functions before calling nand_scan().
 113                 If the function pointer is NULL on entry to nand_scan() then the pointer
 114                 is set to the default function which is suitable for the detected chip type.
 115                 </para></listitem>
 116         </itemizedlist>
 117      </sect1>
 118      <sect1 id="Struct_member_identifiers_XXX">
 119         <title>Struct member identifiers [XXX]</title>
 120         <para>
 121         The struct members are marked with [XXX] identifiers in the
 122         comment. The identifiers explain the usage and scope of the
 123         members. Following identifiers are used:
 124         </para>
 125         <itemizedlist>
 126                 <listitem><para>
 127                 [INTERN]</para><para>
 128                 These members are for NAND driver internal use only and must not be
 129                 modified. Most of these values are calculated from the chip geometry
 130                 information which is evaluated during nand_scan().
 131                 </para></listitem>
 132                 <listitem><para>
 133                 [REPLACEABLE]</para><para>
 134                 Replaceable members hold hardware related functions which can be
 135                 provided by the board driver. The board driver can set the functions which
 136                 should be replaced by board dependent functions before calling nand_scan().
 137                 If the function pointer is NULL on entry to nand_scan() then the pointer
 138                 is set to the default function which is suitable for the detected chip type.
 139                 </para></listitem>
 140                 <listitem><para>
 141                 [BOARDSPECIFIC]</para><para>
 142                 Board specific members hold hardware related information which must
 143                 be provided by the board driver. The board driver must set the function
 144                 pointers and datafields before calling nand_scan().
 145                 </para></listitem>
 146                 <listitem><para>
 147                 [OPTIONAL]</para><para>
 148                 Optional members can hold information relevant for the board driver. The
 149                 generic NAND driver code does not use this information.
 150                 </para></listitem>
 151         </itemizedlist>
 152      </sect1>
 153   </chapter>
 154
 155   <chapter id="basicboarddriver">
 156         <title>Basic board driver</title>
 157         <para>
 158                 For most boards it will be sufficient to provide just the
 159                 basic functions and fill out some really board dependent
 160                 members in the nand chip description structure.
 161         </para>
 162         <sect1 id="Basic_defines">
 163                 <title>Basic defines</title>
 164                 <para>
 165                         At least you have to provide a mtd structure and
 166                         a storage for the ioremap'ed chip address.
 167                         You can allocate the mtd structure using kmalloc
 168                         or you can allocate it statically.
 169                         In case of static allocation you have to allocate
 170                         a nand_chip structure too.
 171                 </para>
 172                 <para>
 173                         Kmalloc based example
 174                 </para>
 175                 <programlisting>
 176 static struct mtd_info *board_mtd;
 177 static void __iomem *baseaddr;
 178                 </programlisting>
 179                 <para>
 180                         Static example
 181                 </para>
 182                 <programlisting>
 183 static struct mtd_info board_mtd;
 184 static struct nand_chip board_chip;
 185 static void __iomem *baseaddr;
 186                 </programlisting>
 187         </sect1>
 188         <sect1 id="Partition_defines">
 189                 <title>Partition defines</title>
 190                 <para>
 191                         If you want to divide your device into partitions, then
 192                         define a partitioning scheme suitable to your board.
 193                 </para>
 194                 <programlisting>
 195 #define NUM_PARTITIONS 2
 196 static struct mtd_partition partition_info[] = {
 197         { .name = "Flash partition 1",
 198           .offset =  0,
 199           .size =    8 * 1024 * 1024 },
 200         { .name = "Flash partition 2",
 201           .offset =  MTDPART_OFS_NEXT,
 202           .size =    MTDPART_SIZ_FULL },
 203 };
 204                 </programlisting>
 205         </sect1>
 206         <sect1 id="Hardware_control_functions">
 207                 <title>Hardware control function</title>
 208                 <para>
 209                         The hardware control function provides access to the
 210                         control pins of the NAND chip(s).
 211                         The access can be done by GPIO pins or by address lines.
 212                         If you use address lines, make sure that the timing
 213                         requirements are met.
 214                 </para>
 215                 <para>
 216                         <emphasis>GPIO based example</emphasis>
 217                 </para>
 218                 <programlisting>
 219 static void board_hwcontrol(struct mtd_info *mtd, int cmd)
 220 {
 221         switch(cmd){
 222                 case NAND_CTL_SETCLE: /* Set CLE pin high */ break;
 223                 case NAND_CTL_CLRCLE: /* Set CLE pin low */ break;
 224                 case NAND_CTL_SETALE: /* Set ALE pin high */ break;
 225                 case NAND_CTL_CLRALE: /* Set ALE pin low */ break;
 226                 case NAND_CTL_SETNCE: /* Set nCE pin low */ break;
 227                 case NAND_CTL_CLRNCE: /* Set nCE pin high */ break;
 228         }
 229 }
 230                 </programlisting>
 231                 <para>
 232                         <emphasis>Address lines based example.</emphasis> It's assumed that the
 233                         nCE pin is driven by a chip select decoder.
 234                 </para>
 235                 <programlisting>
 236 static void board_hwcontrol(struct mtd_info *mtd, int cmd)
 237 {
 238         struct nand_chip *this = (struct nand_chip *) mtd->priv;
 239         switch(cmd){
 240                 case NAND_CTL_SETCLE: this->IO_ADDR_W |= CLE_ADRR_BIT;  break;
 241                 case NAND_CTL_CLRCLE: this->IO_ADDR_W &amp;= ~CLE_ADRR_BIT; break;
 242                 case NAND_CTL_SETALE: this->IO_ADDR_W |= ALE_ADRR_BIT;  break;
 243                 case NAND_CTL_CLRALE: this->IO_ADDR_W &amp;= ~ALE_ADRR_BIT; break;
 244         }
 245 }
 246                 </programlisting>
 247         </sect1>
 248         <sect1 id="Device_ready_function">
 249                 <title>Device ready function</title>
 250                 <para>
 251                         If the hardware interface has the ready busy pin of the NAND chip connected to a
 252                         GPIO or other accessible I/O pin, this function is used to read back the state of the
 253                         pin. The function has no arguments and should return 0, if the device is busy (R/B pin
 254                         is low) and 1, if the device is ready (R/B pin is high).
 255                         If the hardware interface does not give access to the ready busy pin, then
 256                         the function must not be defined and the function pointer this->dev_ready is set to NULL.
 257                 </para>
 258         </sect1>
 259         <sect1 id="Init_function">
 260                 <title>Init function</title>
 261                 <para>
 262                         The init function allocates memory and sets up all the board
 263                         specific parameters and function pointers. When everything
 264                         is set up nand_scan() is called. This function tries to
 265                         detect and identify then chip. If a chip is found all the
 266                         internal data fields are initialized accordingly.
 267                         The structure(s) have to be zeroed out first and then filled with the neccecary
 268                         information about the device.
 269                 </para>
 270                 <programlisting>
 271 static int __init board_init (void)
 272 {
 273         struct nand_chip *this;
 274         int err = 0;
 275
 276         /* Allocate memory for MTD device structure and private data */
 277         board_mtd = kzalloc(sizeof(struct mtd_info) + sizeof(struct nand_chip), GFP_KERNEL);
 278         if (!board_mtd) {
 279                 printk ("Unable to allocate NAND MTD device structure.\n");
 280                 err = -ENOMEM;
 281                 goto out;
 282         }
 283
 284         /* map physical address */
 285         baseaddr = ioremap(CHIP_PHYSICAL_ADDRESS, 1024);
 286         if (!baseaddr) {
 287                 printk("Ioremap to access NAND chip failed\n");
 288                 err = -EIO;
 289                 goto out_mtd;
 290         }
 291
 292         /* Get pointer to private data */
 293         this = (struct nand_chip *) ();
 294         /* Link the private data with the MTD structure */
 295         board_mtd->priv = this;
 296
 297         /* Set address of NAND IO lines */
 298         this->IO_ADDR_R = baseaddr;
 299         this->IO_ADDR_W = baseaddr;
 300         /* Reference hardware control function */
 301         this->hwcontrol = board_hwcontrol;
 302         /* Set command delay time, see datasheet for correct value */
 303         this->chip_delay = CHIP_DEPENDEND_COMMAND_DELAY;
 304         /* Assign the device ready function, if available */
 305         this->dev_ready = board_dev_ready;
 306         this->eccmode = NAND_ECC_SOFT;
 307
 308         /* Scan to find existence of the device */
 309         if (nand_scan (board_mtd, 1)) {
 310                 err = -ENXIO;
 311                 goto out_ior;
 312         }
 313
 314         add_mtd_partitions(board_mtd, partition_info, NUM_PARTITIONS);
 315         goto out;
 316
 317 out_ior:
 318         iounmap(baseaddr);
 319 out_mtd:
 320         kfree (board_mtd);
 321 out:
 322         return err;
 323 }
 324 module_init(board_init);
 325                 </programlisting>
 326         </sect1>
 327         <sect1 id="Exit_function">
 328                 <title>Exit function</title>
 329                 <para>
 330                         The exit function is only neccecary if the driver is
 331                         compiled as a module. It releases all resources which
 332                         are held by the chip driver and unregisters the partitions
 333                         in the MTD layer.
 334                 </para>
 335                 <programlisting>
 336 #ifdef MODULE
 337 static void __exit board_cleanup (void)
 338 {
 339         /* Release resources, unregister device */
 340         nand_release (board_mtd);
 341
 342         /* unmap physical address */
 343         iounmap(baseaddr);
 344
 345         /* Free the MTD device structure */
 346         kfree (board_mtd);
 347 }
 348 module_exit(board_cleanup);
 349 #endif
 350                 </programlisting>
 351         </sect1>
 352   </chapter>
 353
 354   <chapter id="boarddriversadvanced">
 355         <title>Advanced board driver functions</title>
 356         <para>
 357                 This chapter describes the advanced functionality of the NAND
 358                 driver. For a list of functions which can be overridden by the board
 359                 driver see the documentation of the nand_chip structure.
 360         </para>
 361         <sect1 id="Multiple_chip_control">
 362                 <title>Multiple chip control</title>
 363                 <para>
 364                         The nand driver can control chip arrays. Therefore the
 365                         board driver must provide an own select_chip function. This
 366                         function must (de)select the requested chip.
 367                         The function pointer in the nand_chip structure must
 368                         be set before calling nand_scan(). The maxchip parameter
 369                         of nand_scan() defines the maximum number of chips to
 370                         scan for. Make sure that the select_chip function can
 371                         handle the requested number of chips.
 372                 </para>
 373                 <para>
 374                         The nand driver concatenates the chips to one virtual
 375                         chip and provides this virtual chip to the MTD layer.
 376                 </para>
 377                 <para>
 378                         <emphasis>Note: The driver can only handle linear chip arrays
 379                         of equally sized chips. There is no support for
 380                         parallel arrays which extend the buswidth.</emphasis>
 381                 </para>
 382                 <para>
 383                         <emphasis>GPIO based example</emphasis>
 384                 </para>
 385                 <programlisting>
 386 static void board_select_chip (struct mtd_info *mtd, int chip)
 387 {
 388         /* Deselect all chips, set all nCE pins high */
 389         GPIO(BOARD_NAND_NCE) |= 0xff;
 390         if (chip >= 0)
 391                 GPIO(BOARD_NAND_NCE) &amp;= ~ (1 &lt;&lt; chip);
 392 }
 393                 </programlisting>
 394                 <para>
 395                         <emphasis>Address lines based example.</emphasis>
 396                         Its assumed that the nCE pins are connected to an
 397                         address decoder.
 398                 </para>
 399                 <programlisting>
 400 static void board_select_chip (struct mtd_info *mtd, int chip)
 401 {
 402         struct nand_chip *this = (struct nand_chip *) mtd->priv;
 403
 404         /* Deselect all chips */
 405         this->IO_ADDR_R &amp;= ~BOARD_NAND_ADDR_MASK;
 406         this->IO_ADDR_W &amp;= ~BOARD_NAND_ADDR_MASK;
 407         switch (chip) {
 408         case 0:
 409                 this->IO_ADDR_R |= BOARD_NAND_ADDR_CHIP0;
 410                 this->IO_ADDR_W |= BOARD_NAND_ADDR_CHIP0;
 411                 break;
 412         ....
 413         case n:
 414                 this->IO_ADDR_R |= BOARD_NAND_ADDR_CHIPn;
 415                 this->IO_ADDR_W |= BOARD_NAND_ADDR_CHIPn;
 416                 break;
 417         }
 418 }
 419                 </programlisting>
 420         </sect1>
 421         <sect1 id="Hardware_ECC_support">
 422                 <title>Hardware ECC support</title>
 423                 <sect2 id="Functions_and_constants">
 424                         <title>Functions and constants</title>
 425                         <para>
 426                                 The nand driver supports three different types of
 427                                 hardware ECC.
 428                                 <itemizedlist>
 429                                 <listitem><para>NAND_ECC_HW3_256</para><para>
 430                                 Hardware ECC generator providing 3 bytes ECC per
 431                                 256 byte.
 432                                 </para> </listitem>
 433                                 <listitem><para>NAND_ECC_HW3_512</para><para>
 434                                 Hardware ECC generator providing 3 bytes ECC per
 435                                 512 byte.
 436                                 </para> </listitem>
 437                                 <listitem><para>NAND_ECC_HW6_512</para><para>
 438                                 Hardware ECC generator providing 6 bytes ECC per
 439                                 512 byte.
 440                                 </para> </listitem>
 441                                 <listitem><para>NAND_ECC_HW8_512</para><para>
 442                                 Hardware ECC generator providing 6 bytes ECC per
 443                                 512 byte.
 444                                 </para> </listitem>
 445                                 </itemizedlist>
 446                                 If your hardware generator has a different functionality
 447                                 add it at the appropriate place in nand_base.c
 448                         </para>
 449                         <para>
 450                                 The board driver must provide following functions:
 451                                 <itemizedlist>
 452                                 <listitem><para>enable_hwecc</para><para>
 453                                 This function is called before reading / writing to
 454                                 the chip. Reset or initialize the hardware generator
 455                                 in this function. The function is called with an
 456                                 argument which let you distinguish between read
 457                                 and write operations.
 458                                 </para> </listitem>
 459                                 <listitem><para>calculate_ecc</para><para>
 460                                 This function is called after read / write from / to
 461                                 the chip. Transfer the ECC from the hardware to
 462                                 the buffer. If the option NAND_HWECC_SYNDROME is set
 463                                 then the function is only called on write. See below.
 464                                 </para> </listitem>
 465                                 <listitem><para>correct_data</para><para>
 466                                 In case of an ECC error this function is called for
 467                                 error detection and correction. Return 1 respectively 2
 468                                 in case the error can be corrected. If the error is
 469                                 not correctable return -1. If your hardware generator
 470                                 matches the default algorithm of the nand_ecc software
 471                                 generator then use the correction function provided
 472                                 by nand_ecc instead of implementing duplicated code.
 473                                 </para> </listitem>
 474                                 </itemizedlist>
 475                         </para>
 476                 </sect2>
 477                 <sect2 id="Hardware_ECC_with_syndrome_calculation">
 478                 <title>Hardware ECC with syndrome calculation</title>
 479                         <para>
 480                                 Many hardware ECC implementations provide Reed-Solomon
 481                                 codes and calculate an error syndrome on read. The syndrome
 482                                 must be converted to a standard Reed-Solomon syndrome
 483                                 before calling the error correction code in the generic
 484                                 Reed-Solomon library.
 485                         </para>
 486                         <para>
 487                                 The ECC bytes must be placed immediately after the data
 488                                 bytes in order to make the syndrome generator work. This
 489                                 is contrary to the usual layout used by software ECC. The
 490                                 separation of data and out of band area is not longer
 491                                 possible. The nand driver code handles this layout and
 492                                 the remaining free bytes in the oob area are managed by
 493                                 the autoplacement code. Provide a matching oob-layout
 494                                 in this case. See rts_from4.c and diskonchip.c for
 495                                 implementation reference. In those cases we must also
 496                                 use bad block tables on FLASH, because the ECC layout is
 497                                 interferring with the bad block marker positions.
 498                                 See bad block table support for details.
 499                         </para>
 500                 </sect2>
 501         </sect1>
 502         <sect1 id="Bad_Block_table_support">
 503                 <title>Bad block table support</title>
 504                 <para>
 505                         Most NAND chips mark the bad blocks at a defined
 506                         position in the spare area. Those blocks must
 507                         not be erased under any circumstances as the bad
 508                         block information would be lost.
 509                         It is possible to check the bad block mark each
 510                         time when the blocks are accessed by reading the
 511                         spare area of the first page in the block. This
 512                         is time consuming so a bad block table is used.
 513                 </para>
 514                 <para>
 515                         The nand driver supports various types of bad block
 516                         tables.
 517                         <itemizedlist>
 518                         <listitem><para>Per device</para><para>
 519                         The bad block table contains all bad block information
 520                         of the device which can consist of multiple chips.
 521                         </para> </listitem>
 522                         <listitem><para>Per chip</para><para>
 523                         A bad block table is used per chip and contains the
 524                         bad block information for this particular chip.
 525                         </para> </listitem>
 526                         <listitem><para>Fixed offset</para><para>
 527                         The bad block table is located at a fixed offset
 528                         in the chip (device). This applies to various
 529                         DiskOnChip devices.
 530                         </para> </listitem>
 531                         <listitem><para>Automatic placed</para><para>
 532                         The bad block table is automatically placed and
 533                         detected either at the end or at the beginning
 534                         of a chip (device)
 535                         </para> </listitem>
 536                         <listitem><para>Mirrored tables</para><para>
 537                         The bad block table is mirrored on the chip (device) to
 538                         allow updates of the bad block table without data loss.
 539                         </para> </listitem>
 540                         </itemizedlist>
 541                 </para>
 542                 <para>
 543                         nand_scan() calls the function nand_default_bbt().
 544                         nand_default_bbt() selects appropriate default
 545                         bad block table desriptors depending on the chip information
 546                         which was retrieved by nand_scan().
 547                 </para>
 548                 <para>
 549                         The standard policy is scanning the device for bad
 550                         blocks and build a ram based bad block table which
 551                         allows faster access than always checking the
 552                         bad block information on the flash chip itself.
 553                 </para>
 554                 <sect2 id="Flash_based_tables">
 555                         <title>Flash based tables</title>
 556                         <para>
 557                                 It may be desired or neccecary to keep a bad block table in FLASH.
 558                                 For AG-AND chips this is mandatory, as they have no factory marked
 559                                 bad blocks. They have factory marked good blocks. The marker pattern
 560                                 is erased when the block is erased to be reused. So in case of
 561                                 powerloss before writing the pattern back to the chip this block
 562                                 would be lost and added to the bad blocks. Therefore we scan the
 563                                 chip(s) when we detect them the first time for good blocks and
 564                                 store this information in a bad block table before erasing any
 565                                 of the blocks.
 566                         </para>
 567                         <para>
 568                                 The blocks in which the tables are stored are procteted against
 569                                 accidental access by marking them bad in the memory bad block
 570                                 table. The bad block table management functions are allowed
 571                                 to circumvernt this protection.
 572                         </para>
 573                         <para>
 574                                 The simplest way to activate the FLASH based bad block table support
 575                                 is to set the option NAND_BBT_USE_FLASH in the bbt_option field of
 576                                 the nand chip structure before calling nand_scan(). For AG-AND
 577                                 chips is this done by default.
 578                                 This activates the default FLASH based bad block table functionality
 579                                 of the NAND driver. The default bad block table options are
 580                                 <itemizedlist>
 581                                 <listitem><para>Store bad block table per chip</para></listitem>
 582                                 <listitem><para>Use 2 bits per block</para></listitem>
 583                                 <listitem><para>Automatic placement at the end of the chip</para></listitem>
 584                                 <listitem><para>Use mirrored tables with version numbers</para></listitem>
 585                                 <listitem><para>Reserve 4 blocks at the end of the chip</para></listitem>
 586                                 </itemizedlist>
 587                         </para>
 588                 </sect2>
 589                 <sect2 id="User_defined_tables">
 590                         <title>User defined tables</title>
 591                         <para>
 592                                 User defined tables are created by filling out a
 593                                 nand_bbt_descr structure and storing the pointer in the
 594                                 nand_chip structure member bbt_td before calling nand_scan().
 595                                 If a mirror table is neccecary a second structure must be
 596                                 created and a pointer to this structure must be stored
 597                                 in bbt_md inside the nand_chip structure. If the bbt_md
 598                                 member is set to NULL then only the main table is used
 599                                 and no scan for the mirrored table is performed.
 600                         </para>
 601                         <para>
 602                                 The most important field in the nand_bbt_descr structure
 603                                 is the options field. The options define most of the
 604                                 table properties. Use the predefined constants from
 605                                 nand.h to define the options.
 606                                 <itemizedlist>
 607                                 <listitem><para>Number of bits per block</para>
 608                                 <para>The supported number of bits is 1, 2, 4, 8.</para></listitem>
 609                                 <listitem><para>Table per chip</para>
 610                                 <para>Setting the constant NAND_BBT_PERCHIP selects that
 611                                 a bad block table is managed for each chip in a chip array.
 612                                 If this option is not set then a per device bad block table
 613                                 is used.</para></listitem>
 614                                 <listitem><para>Table location is absolute</para>
 615                                 <para>Use the option constant NAND_BBT_ABSPAGE and
 616                                 define the absolute page number where the bad block
 617                                 table starts in the field pages. If you have selected bad block
 618                                 tables per chip and you have a multi chip array then the start page
 619                                 must be given for each chip in the chip array. Note: there is no scan
 620                                 for a table ident pattern performed, so the fields
 621                                 pattern, veroffs, offs, len can be left uninitialized</para></listitem>
 622                                 <listitem><para>Table location is automatically detected</para>
 623                                 <para>The table can either be located in the first or the last good
 624                                 blocks of the chip (device). Set NAND_BBT_LASTBLOCK to place
 625                                 the bad block table at the end of the chip (device). The
 626                                 bad block tables are marked and identified by a pattern which
 627                                 is stored in the spare area of the first page in the block which
 628                                 holds the bad block table. Store a pointer to the pattern
 629                                 in the pattern field. Further the length of the pattern has to be
 630                                 stored in len and the offset in the spare area must be given
 631                                 in the offs member of the nand_bbt_descr structure. For mirrored
 632                                 bad block tables different patterns are mandatory.</para></listitem>
 633                                 <listitem><para>Table creation</para>
 634                                 <para>Set the option NAND_BBT_CREATE to enable the table creation
 635                                 if no table can be found during the scan. Usually this is done only
 636                                 once if a new chip is found. </para></listitem>
 637                                 <listitem><para>Table write support</para>
 638                                 <para>Set the option NAND_BBT_WRITE to enable the table write support.
 639                                 This allows the update of the bad block table(s) in case a block has
 640                                 to be marked bad due to wear. The MTD interface function block_markbad
 641                                 is calling the update function of the bad block table. If the write
 642                                 support is enabled then the table is updated on FLASH.</para>
 643                                 <para>
 644                                 Note: Write support should only be enabled for mirrored tables with
 645                                 version control.
 646                                 </para></listitem>
 647                                 <listitem><para>Table version control</para>
 648                                 <para>Set the option NAND_BBT_VERSION to enable the table version control.
 649                                 It's highly recommended to enable this for mirrored tables with write
 650                                 support. It makes sure that the risk of losing the bad block
 651                                 table information is reduced to the loss of the information about the
 652                                 one worn out block which should be marked bad. The version is stored in
 653                                 4 consecutive bytes in the spare area of the device. The position of
 654                                 the version number is defined by the member veroffs in the bad block table
 655                                 descriptor.</para></listitem>
 656                                 <listitem><para>Save block contents on write</para>
 657                                 <para>
 658                                 In case that the block which holds the bad block table does contain
 659                                 other useful information, set the option NAND_BBT_SAVECONTENT. When
 660                                 the bad block table is written then the whole block is read the bad
 661                                 block table is updated and the block is erased and everything is
 662                                 written back. If this option is not set only the bad block table
 663                                 is written and everything else in the block is ignored and erased.
 664                                 </para></listitem>
 665                                 <listitem><para>Number of reserved blocks</para>
 666                                 <para>
 667                                 For automatic placement some blocks must be reserved for
 668                                 bad block table storage. The number of reserved blocks is defined
 669                                 in the maxblocks member of the babd block table description structure.
 670                                 Reserving 4 blocks for mirrored tables should be a reasonable number.
 671                                 This also limits the number of blocks which are scanned for the bad
 672                                 block table ident pattern.
 673                                 </para></listitem>
 674                                 </itemizedlist>
 675                         </para>
 676                 </sect2>
 677         </sect1>
 678         <sect1 id="Spare_area_placement">
 679                 <title>Spare area (auto)placement</title>
 680                 <para>
 681                         The nand driver implements different possibilities for
 682                         placement of filesystem data in the spare area,
 683                         <itemizedlist>
 684                         <listitem><para>Placement defined by fs driver</para></listitem>
 685                         <listitem><para>Automatic placement</para></listitem>
 686                         </itemizedlist>
 687                         The default placement function is automatic placement. The
 688                         nand driver has built in default placement schemes for the
 689                         various chiptypes. If due to hardware ECC functionality the
 690                         default placement does not fit then the board driver can
 691                         provide a own placement scheme.
 692                 </para>
 693                 <para>
 694                         File system drivers can provide a own placement scheme which
 695                         is used instead of the default placement scheme.
 696                 </para>
 697                 <para>
 698                         Placement schemes are defined by a nand_oobinfo structure
 699                         <programlisting>
 700 struct nand_oobinfo {
 701         int     useecc;
 702         int     eccbytes;
 703         int     eccpos[24];
 704         int     oobfree[8][2];
 705 };
 706                         </programlisting>
 707                         <itemizedlist>
 708                         <listitem><para>useecc</para><para>
 709                                 The useecc member controls the ecc and placement function. The header
 710                                 file include/mtd/mtd-abi.h contains constants to select ecc and
 711                                 placement. MTD_NANDECC_OFF switches off the ecc complete. This is
 712                                 not recommended and available for testing and diagnosis only.
 713                                 MTD_NANDECC_PLACE selects caller defined placement, MTD_NANDECC_AUTOPLACE
 714                                 selects automatic placement.
 715                         </para></listitem>
 716                         <listitem><para>eccbytes</para><para>
 717                                 The eccbytes member defines the number of ecc bytes per page.
 718                         </para></listitem>
 719                         <listitem><para>eccpos</para><para>
 720                                 The eccpos array holds the byte offsets in the spare area where
 721                                 the ecc codes are placed.
 722                         </para></listitem>
 723                         <listitem><para>oobfree</para><para>
 724                                 The oobfree array defines the areas in the spare area which can be
 725                                 used for automatic placement. The information is given in the format
 726                                 {offset, size}. offset defines the start of the usable area, size the
 727                                 length in bytes. More than one area can be defined. The list is terminated
 728                                 by an {0, 0} entry.
 729                         </para></listitem>
 730                         </itemizedlist>
 731                 </para>
 732                 <sect2 id="Placement_defined_by_fs_driver">
 733                         <title>Placement defined by fs driver</title>
 734                         <para>
 735                                 The calling function provides a pointer to a nand_oobinfo
 736                                 structure which defines the ecc placement. For writes the
 737                                 caller must provide a spare area buffer along with the
 738                                 data buffer. The spare area buffer size is (number of pages) *
 739                                 (size of spare area). For reads the buffer size is
 740                                 (number of pages) * ((size of spare area) + (number of ecc
 741                                 steps per page) * sizeof (int)). The driver stores the
 742                                 result of the ecc check for each tuple in the spare buffer.
 743                                 The storage sequence is
 744                         </para>
 745                         <para>
 746                                 &lt;spare data page 0&gt;&lt;ecc result 0&gt;...&lt;ecc result n&gt;
 747                         </para>
 748                         <para>
 749                                 ...
 750                         </para>
 751                         <para>
 752                                 &lt;spare data page n&gt;&lt;ecc result 0&gt;...&lt;ecc result n&gt;
 753                         </para>
 754                         <para>
 755                                 This is a legacy mode used by YAFFS1.
 756                         </para>
 757                         <para>
 758                                 If the spare area buffer is NULL then only the ECC placement is
 759                                 done according to the given scheme in the nand_oobinfo structure.
 760                         </para>
 761                 </sect2>
 762                 <sect2 id="Automatic_placement">
 763                         <title>Automatic placement</title>
 764                         <para>
 765                                 Automatic placement uses the built in defaults to place the
 766                                 ecc bytes in the spare area. If filesystem data have to be stored /
 767                                 read into the spare area then the calling function must provide a
 768                                 buffer. The buffer size per page is determined by the oobfree array in
 769                                 the nand_oobinfo structure.
 770                         </para>
 771                         <para>
 772                                 If the spare area buffer is NULL then only the ECC placement is
 773                                 done according to the default builtin scheme.
 774                         </para>
 775                 </sect2>
 776         </sect1>
 777         <sect1 id="Spare_area_autoplacement_default">
 778                 <title>Spare area autoplacement default schemes</title>
 779                 <sect2 id="pagesize_256">
 780                         <title>256 byte pagesize</title>
 781 <informaltable><tgroup cols="3"><tbody>
 782 <row>
 783 <entry>Offset</entry>
 784 <entry>Content</entry>
 785 <entry>Comment</entry>
 786 </row>
 787 <row>
 788 <entry>0x00</entry>
 789 <entry>ECC byte 0</entry>
 790 <entry>Error correction code byte 0</entry>
 791 </row>
 792 <row>
 793 <entry>0x01</entry>
 794 <entry>ECC byte 1</entry>
 795 <entry>Error correction code byte 1</entry>
 796 </row>
 797 <row>
 798 <entry>0x02</entry>
 799 <entry>ECC byte 2</entry>
 800 <entry>Error correction code byte 2</entry>
 801 </row>
 802 <row>
 803 <entry>0x03</entry>
 804 <entry>Autoplace 0</entry>
 805 <entry></entry>
 806 </row>
 807 <row>
 808 <entry>0x04</entry>
 809 <entry>Autoplace 1</entry>
 810 <entry></entry>
 811 </row>
 812 <row>
 813 <entry>0x05</entry>
 814 <entry>Bad block marker</entry>
 815 <entry>If any bit in this byte is zero, then this block is bad.
 816 This applies only to the first page in a block. In the remaining
 817 pages this byte is reserved</entry>
 818 </row>
 819 <row>
 820 <entry>0x06</entry>
 821 <entry>Autoplace 2</entry>
 822 <entry></entry>
 823 </row>
 824 <row>
 825 <entry>0x07</entry>
 826 <entry>Autoplace 3</entry>
 827 <entry></entry>
 828 </row>
 829 </tbody></tgroup></informaltable>
 830                 </sect2>
 831                 <sect2 id="pagesize_512">
 832                         <title>512 byte pagesize</title>
 833 <informaltable><tgroup cols="3"><tbody>
 834 <row>
 835 <entry>Offset</entry>
 836 <entry>Content</entry>
 837 <entry>Comment</entry>
 838 </row>
 839 <row>
 840 <entry>0x00</entry>
 841 <entry>ECC byte 0</entry>
 842 <entry>Error correction code byte 0 of the lower 256 Byte data in
 843 this page</entry>
 844 </row>
 845 <row>
 846 <entry>0x01</entry>
 847 <entry>ECC byte 1</entry>
 848 <entry>Error correction code byte 1 of the lower 256 Bytes of data
 849 in this page</entry>
 850 </row>
 851 <row>
 852 <entry>0x02</entry>
 853 <entry>ECC byte 2</entry>
 854 <entry>Error correction code byte 2 of the lower 256 Bytes of data
 855 in this page</entry>
 856 </row>
 857 <row>
 858 <entry>0x03</entry>
 859 <entry>ECC byte 3</entry>
 860 <entry>Error correction code byte 0 of the upper 256 Bytes of data
 861 in this page</entry>
 862 </row>
 863 <row>
 864 <entry>0x04</entry>
 865 <entry>reserved</entry>
 866 <entry>reserved</entry>
 867 </row>
 868 <row>
 869 <entry>0x05</entry>
 870 <entry>Bad block marker</entry>
 871 <entry>If any bit in this byte is zero, then this block is bad.
 872 This applies only to the first page in a block. In the remaining
 873 pages this byte is reserved</entry>
 874 </row>
 875 <row>
 876 <entry>0x06</entry>
 877 <entry>ECC byte 4</entry>
 878 <entry>Error correction code byte 1 of the upper 256 Bytes of data
 879 in this page</entry>
 880 </row>
 881 <row>
 882 <entry>0x07</entry>
 883 <entry>ECC byte 5</entry>
 884 <entry>Error correction code byte 2 of the upper 256 Bytes of data
 885 in this page</entry>
 886 </row>
 887 <row>
 888 <entry>0x08 - 0x0F</entry>
 889 <entry>Autoplace 0 - 7</entry>
 890 <entry></entry>
 891 </row>
 892 </tbody></tgroup></informaltable>
 893                 </sect2>
 894                 <sect2 id="pagesize_2048">
 895                         <title>2048 byte pagesize</title>
 896 <informaltable><tgroup cols="3"><tbody>
 897 <row>
 898 <entry>Offset</entry>
 899 <entry>Content</entry>
 900 <entry>Comment</entry>
 901 </row>
 902 <row>
 903 <entry>0x00</entry>
 904 <entry>Bad block marker</entry>
 905 <entry>If any bit in this byte is zero, then this block is bad.
 906 This applies only to the first page in a block. In the remaining
 907 pages this byte is reserved</entry>
 908 </row>
 909 <row>
 910 <entry>0x01</entry>
 911 <entry>Reserved</entry>
 912 <entry>Reserved</entry>
 913 </row>
 914 <row>
 915 <entry>0x02-0x27</entry>
 916 <entry>Autoplace 0 - 37</entry>
 917 <entry></entry>
 918 </row>
 919 <row>
 920 <entry>0x28</entry>
 921 <entry>ECC byte 0</entry>
 922 <entry>Error correction code byte 0 of the first 256 Byte data in
 923 this page</entry>
 924 </row>
 925 <row>
 926 <entry>0x29</entry>
 927 <entry>ECC byte 1</entry>
 928 <entry>Error correction code byte 1 of the first 256 Bytes of data
 929 in this page</entry>
 930 </row>
 931 <row>
 932 <entry>0x2A</entry>
 933 <entry>ECC byte 2</entry>
 934 <entry>Error correction code byte 2 of the first 256 Bytes data in
 935 this page</entry>
 936 </row>
 937 <row>
 938 <entry>0x2B</entry>
 939 <entry>ECC byte 3</entry>
 940 <entry>Error correction code byte 0 of the second 256 Bytes of data
 941 in this page</entry>
 942 </row>
 943 <row>
 944 <entry>0x2C</entry>
 945 <entry>ECC byte 4</entry>
 946 <entry>Error correction code byte 1 of the second 256 Bytes of data
 947 in this page</entry>
 948 </row>
 949 <row>
 950 <entry>0x2D</entry>
 951 <entry>ECC byte 5</entry>
 952 <entry>Error correction code byte 2 of the second 256 Bytes of data
 953 in this page</entry>
 954 </row>
 955 <row>
 956 <entry>0x2E</entry>
 957 <entry>ECC byte 6</entry>
 958 <entry>Error correction code byte 0 of the third 256 Bytes of data
 959 in this page</entry>
 960 </row>
 961 <row>
 962 <entry>0x2F</entry>
 963 <entry>ECC byte 7</entry>
 964 <entry>Error correction code byte 1 of the third 256 Bytes of data
 965 in this page</entry>
 966 </row>
 967 <row>
 968 <entry>0x30</entry>
 969 <entry>ECC byte 8</entry>
 970 <entry>Error correction code byte 2 of the third 256 Bytes of data
 971 in this page</entry>
 972 </row>
 973 <row>
 974 <entry>0x31</entry>
 975 <entry>ECC byte 9</entry>
 976 <entry>Error correction code byte 0 of the fourth 256 Bytes of data
 977 in this page</entry>
 978 </row>
 979 <row>
 980 <entry>0x32</entry>
 981 <entry>ECC byte 10</entry>
 982 <entry>Error correction code byte 1 of the fourth 256 Bytes of data
 983 in this page</entry>
 984 </row>
 985 <row>
 986 <entry>0x33</entry>
 987 <entry>ECC byte 11</entry>
 988 <entry>Error correction code byte 2 of the fourth 256 Bytes of data
 989 in this page</entry>
 990 </row>
 991 <row>
 992 <entry>0x34</entry>
 993 <entry>ECC byte 12</entry>
 994 <entry>Error correction code byte 0 of the fifth 256 Bytes of data
 995 in this page</entry>
 996 </row>
 997 <row>
 998 <entry>0x35</entry>
 999 <entry>ECC byte 13</entry>
1000 <entry>Error correction code byte 1 of the fifth 256 Bytes of data
1001 in this page</entry>
1002 </row>
1003 <row>
1004 <entry>0x36</entry>
1005 <entry>ECC byte 14</entry>
1006 <entry>Error correction code byte 2 of the fifth 256 Bytes of data
1007 in this page</entry>
1008 </row>
1009 <row>
1010 <entry>0x37</entry>
1011 <entry>ECC byte 15</entry>
1012 <entry>Error correction code byte 0 of the sixt 256 Bytes of data
1013 in this page</entry>
1014 </row>
1015 <row>
1016 <entry>0x38</entry>
1017 <entry>ECC byte 16</entry>
1018 <entry>Error correction code byte 1 of the sixt 256 Bytes of data
1019 in this page</entry>
1020 </row>
1021 <row>
1022 <entry>0x39</entry>
1023 <entry>ECC byte 17</entry>
1024 <entry>Error correction code byte 2 of the sixt 256 Bytes of data
1025 in this page</entry>
1026 </row>
1027 <row>
1028 <entry>0x3A</entry>
1029 <entry>ECC byte 18</entry>
1030 <entry>Error correction code byte 0 of the seventh 256 Bytes of
1031 data in this page</entry>
1032 </row>
1033 <row>
1034 <entry>0x3B</entry>
1035 <entry>ECC byte 19</entry>
1036 <entry>Error correction code byte 1 of the seventh 256 Bytes of
1037 data in this page</entry>
1038 </row>
1039 <row>
1040 <entry>0x3C</entry>
1041 <entry>ECC byte 20</entry>
1042 <entry>Error correction code byte 2 of the seventh 256 Bytes of
1043 data in this page</entry>
1044 </row>
1045 <row>
1046 <entry>0x3D</entry>
1047 <entry>ECC byte 21</entry>
1048 <entry>Error correction code byte 0 of the eighth 256 Bytes of data
1049 in this page</entry>
1050 </row>
1051 <row>
1052 <entry>0x3E</entry>
1053 <entry>ECC byte 22</entry>
1054 <entry>Error correction code byte 1 of the eighth 256 Bytes of data
1055 in this page</entry>
1056 </row>
1057 <row>
1058 <entry>0x3F</entry>
1059 <entry>ECC byte 23</entry>
1060 <entry>Error correction code byte 2 of the eighth 256 Bytes of data
1061 in this page</entry>
1062 </row>
1063 </tbody></tgroup></informaltable>
1064                 </sect2>
1065         </sect1>
1066   </chapter>
1067
1068   <chapter id="filesystems">
1069         <title>Filesystem support</title>
1070         <para>
1071                 The NAND driver provides all neccecary functions for a
1072                 filesystem via the MTD interface.
1073         </para>
1074         <para>
1075                 Filesystems must be aware of the NAND pecularities and
1076                 restrictions. One major restrictions of NAND Flash is, that you cannot
1077                 write as often as you want to a page. The consecutive writes to a page,
1078                 before erasing it again, are restricted to 1-3 writes, depending on the
1079                 manufacturers specifications. This applies similar to the spare area.
1080         </para>
1081         <para>
1082                 Therefore NAND aware filesystems must either write in page size chunks
1083                 or hold a writebuffer to collect smaller writes until they sum up to
1084                 pagesize. Available NAND aware filesystems: JFFS2, YAFFS.
1085         </para>
1086         <para>
1087                 The spare area usage to store filesystem data is controlled by
1088                 the spare area placement functionality which is described in one
1089                 of the earlier chapters.
1090         </para>
1091   </chapter>
1092   <chapter id="tools">
1093         <title>Tools</title>
1094         <para>
1095                 The MTD project provides a couple of helpful tools to handle NAND Flash.
1096                 <itemizedlist>
1097                 <listitem><para>flasherase, flasheraseall: Erase and format FLASH partitions</para></listitem>
1098                 <listitem><para>nandwrite: write filesystem images to NAND FLASH</para></listitem>
1099                 <listitem><para>nanddump: dump the contents of a NAND FLASH partitions</para></listitem>
1100                 </itemizedlist>
1101         </para>
1102         <para>
1103                 These tools are aware of the NAND restrictions. Please use those tools
1104                 instead of complaining about errors which are caused by non NAND aware
1105                 access methods.
1106         </para>
1107   </chapter>
1108
1109   <chapter id="defines">
1110      <title>Constants</title>
1111      <para>
1112      This chapter describes the constants which might be relevant for a driver developer.
1113      </para>
1114      <sect1 id="Chip_option_constants">
1115         <title>Chip option constants</title>
1116         <sect2 id="Constants_for_chip_id_table">
1117                 <title>Constants for chip id table</title>
1118                 <para>
1119                 These constants are defined in nand.h. They are ored together to describe
1120                 the chip functionality.
1121                 <programlisting>
1122 /* Buswitdh is 16 bit */
1123 #define NAND_BUSWIDTH_16        0x00000002
1124 /* Device supports partial programming without padding */
1125 #define NAND_NO_PADDING         0x00000004
1126 /* Chip has cache program function */
1127 #define NAND_CACHEPRG           0x00000008
1128 /* Chip has copy back function */
1129 #define NAND_COPYBACK           0x00000010
1130 /* AND Chip which has 4 banks and a confusing page / block
1131  * assignment. See Renesas datasheet for further information */
1132 #define NAND_IS_AND             0x00000020
1133 /* Chip has a array of 4 pages which can be read without
1134  * additional ready /busy waits */
1135 #define NAND_4PAGE_ARRAY        0x00000040
1136                 </programlisting>
1137                 </para>
1138         </sect2>
1139         <sect2 id="Constants_for_runtime_options">
1140                 <title>Constants for runtime options</title>
1141                 <para>
1142                 These constants are defined in nand.h. They are ored together to describe
1143                 the functionality.
1144                 <programlisting>
1145 /* The hw ecc generator provides a syndrome instead a ecc value on read
1146  * This can only work if we have the ecc bytes directly behind the
1147  * data bytes. Applies for DOC and AG-AND Renesas HW Reed Solomon generators */
1148 #define NAND_HWECC_SYNDROME     0x00020000
1149                 </programlisting>
1150                 </para>
1151         </sect2>
1152      </sect1>
1153
1154      <sect1 id="EEC_selection_constants">
1155         <title>ECC selection constants</title>
1156         <para>
1157         Use these constants to select the ECC algorithm.
1158         <programlisting>
1159 /* No ECC. Usage is not recommended ! */
1160 #define NAND_ECC_NONE           0
1161 /* Software ECC 3 byte ECC per 256 Byte data */
1162 #define NAND_ECC_SOFT           1
1163 /* Hardware ECC 3 byte ECC per 256 Byte data */
1164 #define NAND_ECC_HW3_256        2
1165 /* Hardware ECC 3 byte ECC per 512 Byte data */
1166 #define NAND_ECC_HW3_512        3
1167 /* Hardware ECC 6 byte ECC per 512 Byte data */
1168 #define NAND_ECC_HW6_512        4
1169 /* Hardware ECC 6 byte ECC per 512 Byte data */
1170 #define NAND_ECC_HW8_512        6
1171         </programlisting>
1172         </para>
1173      </sect1>
1174
1175      <sect1 id="Hardware_control_related_constants">
1176         <title>Hardware control related constants</title>
1177         <para>
1178         These constants describe the requested hardware access function when
1179         the boardspecific hardware control function is called
1180         <programlisting>
1181 /* Select the chip by setting nCE to low */
1182 #define NAND_CTL_SETNCE         1
1183 /* Deselect the chip by setting nCE to high */
1184 #define NAND_CTL_CLRNCE         2
1185 /* Select the command latch by setting CLE to high */
1186 #define NAND_CTL_SETCLE         3
1187 /* Deselect the command latch by setting CLE to low */
1188 #define NAND_CTL_CLRCLE         4
1189 /* Select the address latch by setting ALE to high */
1190 #define NAND_CTL_SETALE         5
1191 /* Deselect the address latch by setting ALE to low */
1192 #define NAND_CTL_CLRALE         6
1193 /* Set write protection by setting WP to high. Not used! */
1194 #define NAND_CTL_SETWP          7
1195 /* Clear write protection by setting WP to low. Not used! */
1196 #define NAND_CTL_CLRWP          8
1197         </programlisting>
1198         </para>
1199      </sect1>
1200
1201      <sect1 id="Bad_block_table_constants">
1202         <title>Bad block table related constants</title>
1203         <para>
1204         These constants describe the options used for bad block
1205         table descriptors.
1206         <programlisting>
1207 /* Options for the bad block table descriptors */
1208
1209 /* The number of bits used per block in the bbt on the device */
1210 #define NAND_BBT_NRBITS_MSK     0x0000000F
1211 #define NAND_BBT_1BIT           0x00000001
1212 #define NAND_BBT_2BIT           0x00000002
1213 #define NAND_BBT_4BIT           0x00000004
1214 #define NAND_BBT_8BIT           0x00000008
1215 /* The bad block table is in the last good block of the device */
1216 #define NAND_BBT_LASTBLOCK      0x00000010
1217 /* The bbt is at the given page, else we must scan for the bbt */
1218 #define NAND_BBT_ABSPAGE        0x00000020
1219 /* bbt is stored per chip on multichip devices */
1220 #define NAND_BBT_PERCHIP        0x00000080
1221 /* bbt has a version counter at offset veroffs */
1222 #define NAND_BBT_VERSION        0x00000100
1223 /* Create a bbt if none axists */
1224 #define NAND_BBT_CREATE         0x00000200
1225 /* Write bbt if neccecary */
1226 #define NAND_BBT_WRITE          0x00001000
1227 /* Read and write back block contents when writing bbt */
1228 #define NAND_BBT_SAVECONTENT    0x00002000
1229         </programlisting>
1230         </para>
1231      </sect1>
1232
1233   </chapter>
1234
1235   <chapter id="structs">
1236      <title>Structures</title>
1237      <para>
1238      This chapter contains the autogenerated documentation of the structures which are
1239      used in the NAND driver and might be relevant for a driver developer. Each
1240      struct member has a short description which is marked with an [XXX] identifier.
1241      See the chapter "Documentation hints" for an explanation.
1242      </para>
1243 !Iinclude/linux/mtd/nand.h
1244   </chapter>
1245
1246   <chapter id="pubfunctions">
1247      <title>Public Functions Provided</title>
1248      <para>
1249      This chapter contains the autogenerated documentation of the NAND kernel API functions
1250       which are exported. Each function has a short description which is marked with an [XXX] identifier.
1251      See the chapter "Documentation hints" for an explanation.
1252      </para>
1253 !Edrivers/mtd/nand/nand_base.c
1254 !Edrivers/mtd/nand/nand_bbt.c
1255 !Edrivers/mtd/nand/nand_ecc.c
1256   </chapter>
1257
1258   <chapter id="intfunctions">
1259      <title>Internal Functions Provided</title>
1260      <para>
1261      This chapter contains the autogenerated documentation of the NAND driver internal functions.
1262      Each function has a short description which is marked with an [XXX] identifier.
1263      See the chapter "Documentation hints" for an explanation.
1264      The functions marked with [DEFAULT] might be relevant for a board driver developer.
1265      </para>
1266 !Idrivers/mtd/nand/nand_base.c
1267 !Idrivers/mtd/nand/nand_bbt.c
1268 <!-- No internal functions for kernel-doc:
1269 X!Idrivers/mtd/nand/nand_ecc.c
1270 -->
1271   </chapter>
1272
1273   <chapter id="credits">
1274      <title>Credits</title>
1275         <para>
1276                 The following people have contributed to the NAND driver:
1277                 <orderedlist>
1278                         <listitem><para>Steven J. Hill<email>sjhill@realitydiluted.com</email></para></listitem>
1279                         <listitem><para>David Woodhouse<email>dwmw2@infradead.org</email></para></listitem>
1280                         <listitem><para>Thomas Gleixner<email>tglx@linutronix.de</email></para></listitem>
1281                 </orderedlist>
1282                 A lot of users have provided bugfixes, improvements and helping hands for testing.
1283                 Thanks a lot.
1284         </para>
1285         <para>
1286                 The following people have contributed to this document:
1287                 <orderedlist>
1288                         <listitem><para>Thomas Gleixner<email>tglx@linutronix.de</email></para></listitem>
1289                 </orderedlist>
1290         </para>
1291   </chapter>
1292 </book>