arch/parisc/Makefile

   1 #
   2 # parisc/Makefile
   3 #
   4 # This file is included by the global makefile so that you can add your own
   5 # architecture-specific flags and dependencies. Remember to do have actions
   6 # for "archclean" and "archdep" for cleaning up and making dependencies for
   7 # this architecture
   8 #
   9 # This file is subject to the terms and conditions of the GNU General Public
  10 # License.  See the file "COPYING" in the main directory of this archive
  11 # for more details.
  12 #
  13 # Copyright (C) 1994 by Linus Torvalds
  14 # Portions Copyright (C) 1999 The Puffin Group
  15 #
  16 # Modified for PA-RISC Linux by Paul Lahaie, Alex deVries,
  17 # Mike Shaver, Helge Deller and Martin K. Petersen
  18 #
  19
  20 KBUILD_IMAGE := vmlinuz
  21
  22 KBUILD_DEFCONFIG := default_defconfig
  23
  24 NM              = sh $(srctree)/arch/parisc/nm
  25 CHECKFLAGS      += -D__hppa__=1
  26 LIBGCC          = $(shell $(CC) $(KBUILD_CFLAGS) -print-libgcc-file-name)
  27
  28 ifdef CONFIG_64BIT
  29 UTS_MACHINE     := parisc64
  30 CHECKFLAGS      += -D__LP64__=1 -m64
  31 CC_ARCHES       = hppa64
  32 else # 32-bit
  33 CC_ARCHES       = hppa hppa2.0 hppa1.1
  34 endif
  35
  36 ifneq ($(SUBARCH),$(UTS_MACHINE))
  37         ifeq ($(CROSS_COMPILE),)
  38                 CC_SUFFIXES = linux linux-gnu unknown-linux-gnu
  39                 CROSS_COMPILE := $(call cc-cross-prefix, \
  40                         $(foreach a,$(CC_ARCHES), \
  41                         $(foreach s,$(CC_SUFFIXES),$(a)-$(s)-)))
  42         endif
  43 endif
  44
  45 OBJCOPY_FLAGS =-O binary -R .note -R .comment -S
  46
  47 cflags-y        := -pipe
  48
  49 # These flags should be implied by an hppa-linux configuration, but they
  50 # are not in gcc 3.2.
  51 cflags-y        += -mno-space-regs -mfast-indirect-calls
  52
  53 # Currently we save and restore fpregs on all kernel entry/interruption paths.
  54 # If that gets optimized, we might need to disable the use of fpregs in the
  55 # kernel.
  56 cflags-y        += -mdisable-fpregs
  57
  58 # Without this, "ld -r" results in .text sections that are too big
  59 # (> 0x40000) for branches to reach stubs.
  60 ifndef CONFIG_FUNCTION_TRACER
  61   cflags-y      += -ffunction-sections
  62 endif
  63
  64 # Use long jumps instead of long branches (needed if your linker fails to
  65 # link a too big vmlinux executable). Not enabled for building modules.
  66 ifdef CONFIG_MLONGCALLS
  67 KBUILD_CFLAGS_KERNEL += -mlong-calls
  68 endif
  69
  70 # select which processor to optimise for
  71 cflags-$(CONFIG_PA7000)         += -march=1.1 -mschedule=7100
  72 cflags-$(CONFIG_PA7200)         += -march=1.1 -mschedule=7200
  73 cflags-$(CONFIG_PA7100LC)       += -march=1.1 -mschedule=7100LC
  74 cflags-$(CONFIG_PA7300LC)       += -march=1.1 -mschedule=7300
  75 cflags-$(CONFIG_PA8X00)         += -march=2.0 -mschedule=8000
  76
  77 head-y                  := arch/parisc/kernel/head.o
  78
  79 KBUILD_CFLAGS   += $(cflags-y)
  80
  81 kernel-y                        := mm/ kernel/ math-emu/
  82 kernel-$(CONFIG_HPUX)           += hpux/
  83
  84 core-y  += $(addprefix arch/parisc/, $(kernel-y))
  85 libs-y  += arch/parisc/lib/ $(LIBGCC)
  86
  87 drivers-$(CONFIG_OPROFILE)              += arch/parisc/oprofile/
  88
  89 PALO := $(shell if (which palo 2>&1); then : ; \
  90         elif [ -x /sbin/palo ]; then echo /sbin/palo; \
  91         fi)
  92
  93 PALOCONF := $(shell if [ -f $(src)/palo.conf ]; then echo $(src)/palo.conf; \
  94         else echo $(obj)/palo.conf; \
  95         fi)
  96
  97 palo lifimage: vmlinuz
  98         @if test ! -x "$(PALO)"; then \
  99                 echo 'ERROR: Please install palo first (apt-get install palo)';\
 100                 echo 'or build it from source and install it somewhere in your $$PATH';\
 101                 false; \
 102         fi
 103         @if test ! -f "$(PALOCONF)"; then \
 104                 cp $(src)/arch/parisc/defpalo.conf $(obj)/palo.conf; \
 105                 echo 'A generic palo config file ($(obj)/palo.conf) has been created for you.'; \
 106                 echo 'You should check it and re-run "make palo".'; \
 107                 echo 'WARNING: the "lifimage" file is now placed in this directory by default!'; \
 108                 false; \
 109         fi
 110         $(PALO) -f $(PALOCONF)
 111
 112 BOOT_TARGETS    = zImage Image palo lifimage
 113 INSTALL_TARGETS = zinstall install
 114
 115 PHONY += bzImage $(BOOT_TARGETS) $(INSTALL_TARGETS)
 116
 117 bzImage zImage: vmlinuz
 118 Image: vmlinux
 119
 120 vmlinuz: vmlinux
 121         @gzip -cf -9 $< > $@
 122
 123 install:
 124         $(CONFIG_SHELL) $(src)/arch/parisc/install.sh \
 125                         $(KERNELRELEASE) vmlinux System.map "$(INSTALL_PATH)"
 126 zinstall:
 127         $(CONFIG_SHELL) $(src)/arch/parisc/install.sh \
 128                         $(KERNELRELEASE) vmlinuz System.map "$(INSTALL_PATH)"
 129
 130 CLEAN_FILES     += lifimage
 131 MRPROPER_FILES  += palo.conf
 132
 133 define archhelp
 134         @echo  '* vmlinux       - Uncompressed kernel image (./vmlinux)'
 135         @echo  '  vmlinuz       - Compressed kernel image (./vmlinuz)'
 136         @echo  '  palo          - Bootable image (./lifimage)'
 137         @echo  '  install       - Install uncompressed vmlinux kernel using'
 138         @echo  '                  (your) ~/bin/$(INSTALLKERNEL) or'
 139         @echo  '                  (distribution) /sbin/$(INSTALLKERNEL) or'
 140         @echo  '                  copy to $$(INSTALL_PATH)'
 141         @echo  '  zinstall      - Install compressed vmlinuz kernel'
 142 endef
 143
 144 # we require gcc 3.3 or above to compile the kernel
 145 archprepare: checkbin
 146 checkbin:
 147         @if test "$(call cc-version)" -lt "0303"; then \
 148                 echo -n "Sorry, GCC v3.3 or above is required to build " ; \
 149                 echo "the kernel." ; \
 150                 false ; \
 151         fi