1 /******************************************************************************
3 * Name: actbl.h - Basic ACPI Table Definitions
5 *****************************************************************************/
8 * Copyright (C) 2000 - 2014, Intel Corp.
11 * Redistribution and use in source and binary forms, with or without
12 * modification, are permitted provided that the following conditions
14 * 1. Redistributions of source code must retain the above copyright
15 * notice, this list of conditions, and the following disclaimer,
16 * without modification.
17 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
18 * substantially similar to the "NO WARRANTY" disclaimer below
19 * ("Disclaimer") and any redistribution must be conditioned upon
20 * including a substantially similar Disclaimer requirement for further
21 * binary redistribution.
22 * 3. Neither the names of the above-listed copyright holders nor the names
23 * of any contributors may be used to endorse or promote products derived
24 * from this software without specific prior written permission.
26 * Alternatively, this software may be distributed under the terms of the
27 * GNU General Public License ("GPL") version 2 as published by the Free
28 * Software Foundation.
31 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
32 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
33 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
34 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
35 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
36 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
37 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
38 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
39 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
40 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
41 * POSSIBILITY OF SUCH DAMAGES.
47 /*******************************************************************************
49 * Fundamental ACPI tables
51 * This file contains definitions for the ACPI tables that are directly consumed
52 * by ACPICA. All other tables are consumed by the OS-dependent ACPI-related
53 * device drivers and other OS support code.
55 * The RSDP and FACS do not use the common ACPI table header. All other ACPI
56 * tables use the header.
58 ******************************************************************************/
61 * Values for description table header signatures for tables defined in this
62 * file. Useful because they make it more difficult to inadvertently type in
63 * the wrong signature.
65 #define ACPI_SIG_DSDT "DSDT" /* Differentiated System Description Table */
66 #define ACPI_SIG_FADT "FACP" /* Fixed ACPI Description Table */
67 #define ACPI_SIG_FACS "FACS" /* Firmware ACPI Control Structure */
68 #define ACPI_SIG_PSDT "PSDT" /* Persistent System Description Table */
69 #define ACPI_SIG_RSDP "RSD PTR " /* Root System Description Pointer */
70 #define ACPI_SIG_RSDT "RSDT" /* Root System Description Table */
71 #define ACPI_SIG_XSDT "XSDT" /* Extended System Description Table */
72 #define ACPI_SIG_SSDT "SSDT" /* Secondary System Description Table */
73 #define ACPI_RSDP_NAME "RSDP" /* Short name for RSDP, not signature */
76 * All tables and structures must be byte-packed to match the ACPI
77 * specification, since the tables are provided by the system BIOS
82 * Note: C bitfields are not used for this reason:
84 * "Bitfields are great and easy to read, but unfortunately the C language
85 * does not specify the layout of bitfields in memory, which means they are
86 * essentially useless for dealing with packed data in on-disk formats or
87 * binary wire protocols." (Or ACPI tables and buffers.) "If you ask me,
88 * this decision was a design error in C. Ritchie could have picked an order
89 * and stuck with it." Norman Ramsey.
90 * See http://stackoverflow.com/a/1053662/41661
93 /*******************************************************************************
95 * Master ACPI Table Header. This common header is used by all ACPI tables
96 * except the RSDP and FACS.
98 ******************************************************************************/
100 struct acpi_table_header
{
101 char signature
[ACPI_NAME_SIZE
]; /* ASCII table signature */
102 u32 length
; /* Length of table in bytes, including this header */
103 u8 revision
; /* ACPI Specification minor version number */
104 u8 checksum
; /* To make sum of entire table == 0 */
105 char oem_id
[ACPI_OEM_ID_SIZE
]; /* ASCII OEM identification */
106 char oem_table_id
[ACPI_OEM_TABLE_ID_SIZE
]; /* ASCII OEM table identification */
107 u32 oem_revision
; /* OEM revision number */
108 char asl_compiler_id
[ACPI_NAME_SIZE
]; /* ASCII ASL compiler vendor ID */
109 u32 asl_compiler_revision
; /* ASL compiler version */
112 /*******************************************************************************
114 * GAS - Generic Address Structure (ACPI 2.0+)
116 * Note: Since this structure is used in the ACPI tables, it is byte aligned.
117 * If misaligned access is not supported by the hardware, accesses to the
118 * 64-bit Address field must be performed with care.
120 ******************************************************************************/
122 struct acpi_generic_address
{
123 u8 space_id
; /* Address space where struct or register exists */
124 u8 bit_width
; /* Size in bits of given register */
125 u8 bit_offset
; /* Bit offset within the register */
126 u8 access_width
; /* Minimum Access size (ACPI 3.0) */
127 u64 address
; /* 64-bit address of struct or register */
130 /*******************************************************************************
132 * RSDP - Root System Description Pointer (Signature is "RSD PTR ")
135 ******************************************************************************/
137 struct acpi_table_rsdp
{
138 char signature
[8]; /* ACPI signature, contains "RSD PTR " */
139 u8 checksum
; /* ACPI 1.0 checksum */
140 char oem_id
[ACPI_OEM_ID_SIZE
]; /* OEM identification */
141 u8 revision
; /* Must be (0) for ACPI 1.0 or (2) for ACPI 2.0+ */
142 u32 rsdt_physical_address
; /* 32-bit physical address of the RSDT */
143 u32 length
; /* Table length in bytes, including header (ACPI 2.0+) */
144 u64 xsdt_physical_address
; /* 64-bit physical address of the XSDT (ACPI 2.0+) */
145 u8 extended_checksum
; /* Checksum of entire table (ACPI 2.0+) */
146 u8 reserved
[3]; /* Reserved, must be zero */
149 /* Standalone struct for the ACPI 1.0 RSDP */
151 struct acpi_rsdp_common
{
154 char oem_id
[ACPI_OEM_ID_SIZE
];
156 u32 rsdt_physical_address
;
159 /* Standalone struct for the extended part of the RSDP (ACPI 2.0+) */
161 struct acpi_rsdp_extension
{
163 u64 xsdt_physical_address
;
164 u8 extended_checksum
;
168 /*******************************************************************************
170 * RSDT/XSDT - Root System Description Tables
173 ******************************************************************************/
175 struct acpi_table_rsdt
{
176 struct acpi_table_header header
; /* Common ACPI table header */
177 u32 table_offset_entry
[1]; /* Array of pointers to ACPI tables */
180 struct acpi_table_xsdt
{
181 struct acpi_table_header header
; /* Common ACPI table header */
182 u64 table_offset_entry
[1]; /* Array of pointers to ACPI tables */
185 #define ACPI_RSDT_ENTRY_SIZE (sizeof (u32))
186 #define ACPI_XSDT_ENTRY_SIZE (sizeof (u64))
188 /*******************************************************************************
190 * FACS - Firmware ACPI Control Structure (FACS)
192 ******************************************************************************/
194 struct acpi_table_facs
{
195 char signature
[4]; /* ASCII table signature */
196 u32 length
; /* Length of structure, in bytes */
197 u32 hardware_signature
; /* Hardware configuration signature */
198 u32 firmware_waking_vector
; /* 32-bit physical address of the Firmware Waking Vector */
199 u32 global_lock
; /* Global Lock for shared hardware resources */
201 u64 xfirmware_waking_vector
; /* 64-bit version of the Firmware Waking Vector (ACPI 2.0+) */
202 u8 version
; /* Version of this table (ACPI 2.0+) */
203 u8 reserved
[3]; /* Reserved, must be zero */
204 u32 ospm_flags
; /* Flags to be set by OSPM (ACPI 4.0) */
205 u8 reserved1
[24]; /* Reserved, must be zero */
208 /* Masks for global_lock flag field above */
210 #define ACPI_GLOCK_PENDING (1) /* 00: Pending global lock ownership */
211 #define ACPI_GLOCK_OWNED (1<<1) /* 01: Global lock is owned */
213 /* Masks for Flags field above */
215 #define ACPI_FACS_S4_BIOS_PRESENT (1) /* 00: S4BIOS support is present */
216 #define ACPI_FACS_64BIT_WAKE (1<<1) /* 01: 64-bit wake vector supported (ACPI 4.0) */
218 /* Masks for ospm_flags field above */
220 #define ACPI_FACS_64BIT_ENVIRONMENT (1) /* 00: 64-bit wake environment is required (ACPI 4.0) */
222 /*******************************************************************************
224 * FADT - Fixed ACPI Description Table (Signature "FACP")
227 ******************************************************************************/
229 /* Fields common to all versions of the FADT */
231 struct acpi_table_fadt
{
232 struct acpi_table_header header
; /* Common ACPI table header */
233 u32 facs
; /* 32-bit physical address of FACS */
234 u32 dsdt
; /* 32-bit physical address of DSDT */
235 u8 model
; /* System Interrupt Model (ACPI 1.0) - not used in ACPI 2.0+ */
236 u8 preferred_profile
; /* Conveys preferred power management profile to OSPM. */
237 u16 sci_interrupt
; /* System vector of SCI interrupt */
238 u32 smi_command
; /* 32-bit Port address of SMI command port */
239 u8 acpi_enable
; /* Value to write to SMI_CMD to enable ACPI */
240 u8 acpi_disable
; /* Value to write to SMI_CMD to disable ACPI */
241 u8 s4_bios_request
; /* Value to write to SMI_CMD to enter S4BIOS state */
242 u8 pstate_control
; /* Processor performance state control */
243 u32 pm1a_event_block
; /* 32-bit port address of Power Mgt 1a Event Reg Blk */
244 u32 pm1b_event_block
; /* 32-bit port address of Power Mgt 1b Event Reg Blk */
245 u32 pm1a_control_block
; /* 32-bit port address of Power Mgt 1a Control Reg Blk */
246 u32 pm1b_control_block
; /* 32-bit port address of Power Mgt 1b Control Reg Blk */
247 u32 pm2_control_block
; /* 32-bit port address of Power Mgt 2 Control Reg Blk */
248 u32 pm_timer_block
; /* 32-bit port address of Power Mgt Timer Ctrl Reg Blk */
249 u32 gpe0_block
; /* 32-bit port address of General Purpose Event 0 Reg Blk */
250 u32 gpe1_block
; /* 32-bit port address of General Purpose Event 1 Reg Blk */
251 u8 pm1_event_length
; /* Byte Length of ports at pm1x_event_block */
252 u8 pm1_control_length
; /* Byte Length of ports at pm1x_control_block */
253 u8 pm2_control_length
; /* Byte Length of ports at pm2_control_block */
254 u8 pm_timer_length
; /* Byte Length of ports at pm_timer_block */
255 u8 gpe0_block_length
; /* Byte Length of ports at gpe0_block */
256 u8 gpe1_block_length
; /* Byte Length of ports at gpe1_block */
257 u8 gpe1_base
; /* Offset in GPE number space where GPE1 events start */
258 u8 cst_control
; /* Support for the _CST object and C-States change notification */
259 u16 c2_latency
; /* Worst case HW latency to enter/exit C2 state */
260 u16 c3_latency
; /* Worst case HW latency to enter/exit C3 state */
261 u16 flush_size
; /* Processor memory cache line width, in bytes */
262 u16 flush_stride
; /* Number of flush strides that need to be read */
263 u8 duty_offset
; /* Processor duty cycle index in processor P_CNT reg */
264 u8 duty_width
; /* Processor duty cycle value bit width in P_CNT register */
265 u8 day_alarm
; /* Index to day-of-month alarm in RTC CMOS RAM */
266 u8 month_alarm
; /* Index to month-of-year alarm in RTC CMOS RAM */
267 u8 century
; /* Index to century in RTC CMOS RAM */
268 u16 boot_flags
; /* IA-PC Boot Architecture Flags (see below for individual flags) */
269 u8 reserved
; /* Reserved, must be zero */
270 u32 flags
; /* Miscellaneous flag bits (see below for individual flags) */
271 struct acpi_generic_address reset_register
; /* 64-bit address of the Reset register */
272 u8 reset_value
; /* Value to write to the reset_register port to reset the system */
273 u8 reserved4
[3]; /* Reserved, must be zero */
274 u64 Xfacs
; /* 64-bit physical address of FACS */
275 u64 Xdsdt
; /* 64-bit physical address of DSDT */
276 struct acpi_generic_address xpm1a_event_block
; /* 64-bit Extended Power Mgt 1a Event Reg Blk address */
277 struct acpi_generic_address xpm1b_event_block
; /* 64-bit Extended Power Mgt 1b Event Reg Blk address */
278 struct acpi_generic_address xpm1a_control_block
; /* 64-bit Extended Power Mgt 1a Control Reg Blk address */
279 struct acpi_generic_address xpm1b_control_block
; /* 64-bit Extended Power Mgt 1b Control Reg Blk address */
280 struct acpi_generic_address xpm2_control_block
; /* 64-bit Extended Power Mgt 2 Control Reg Blk address */
281 struct acpi_generic_address xpm_timer_block
; /* 64-bit Extended Power Mgt Timer Ctrl Reg Blk address */
282 struct acpi_generic_address xgpe0_block
; /* 64-bit Extended General Purpose Event 0 Reg Blk address */
283 struct acpi_generic_address xgpe1_block
; /* 64-bit Extended General Purpose Event 1 Reg Blk address */
284 struct acpi_generic_address sleep_control
; /* 64-bit Sleep Control register (ACPI 5.0) */
285 struct acpi_generic_address sleep_status
; /* 64-bit Sleep Status register (ACPI 5.0) */
288 /* Masks for FADT Boot Architecture Flags (boot_flags) [Vx]=Introduced in this FADT revision */
290 #define ACPI_FADT_LEGACY_DEVICES (1) /* 00: [V2] System has LPC or ISA bus devices */
291 #define ACPI_FADT_8042 (1<<1) /* 01: [V3] System has an 8042 controller on port 60/64 */
292 #define ACPI_FADT_NO_VGA (1<<2) /* 02: [V4] It is not safe to probe for VGA hardware */
293 #define ACPI_FADT_NO_MSI (1<<3) /* 03: [V4] Message Signaled Interrupts (MSI) must not be enabled */
294 #define ACPI_FADT_NO_ASPM (1<<4) /* 04: [V4] PCIe ASPM control must not be enabled */
295 #define ACPI_FADT_NO_CMOS_RTC (1<<5) /* 05: [V5] No CMOS real-time clock present */
297 #define FADT2_REVISION_ID 3
299 /* Masks for FADT flags */
301 #define ACPI_FADT_WBINVD (1) /* 00: [V1] The WBINVD instruction works properly */
302 #define ACPI_FADT_WBINVD_FLUSH (1<<1) /* 01: [V1] WBINVD flushes but does not invalidate caches */
303 #define ACPI_FADT_C1_SUPPORTED (1<<2) /* 02: [V1] All processors support C1 state */
304 #define ACPI_FADT_C2_MP_SUPPORTED (1<<3) /* 03: [V1] C2 state works on MP system */
305 #define ACPI_FADT_POWER_BUTTON (1<<4) /* 04: [V1] Power button is handled as a control method device */
306 #define ACPI_FADT_SLEEP_BUTTON (1<<5) /* 05: [V1] Sleep button is handled as a control method device */
307 #define ACPI_FADT_FIXED_RTC (1<<6) /* 06: [V1] RTC wakeup status is not in fixed register space */
308 #define ACPI_FADT_S4_RTC_WAKE (1<<7) /* 07: [V1] RTC alarm can wake system from S4 */
309 #define ACPI_FADT_32BIT_TIMER (1<<8) /* 08: [V1] ACPI timer width is 32-bit (0=24-bit) */
310 #define ACPI_FADT_DOCKING_SUPPORTED (1<<9) /* 09: [V1] Docking supported */
311 #define ACPI_FADT_RESET_REGISTER (1<<10) /* 10: [V2] System reset via the FADT RESET_REG supported */
312 #define ACPI_FADT_SEALED_CASE (1<<11) /* 11: [V3] No internal expansion capabilities and case is sealed */
313 #define ACPI_FADT_HEADLESS (1<<12) /* 12: [V3] No local video capabilities or local input devices */
314 #define ACPI_FADT_SLEEP_TYPE (1<<13) /* 13: [V3] Must execute native instruction after writing SLP_TYPx register */
315 #define ACPI_FADT_PCI_EXPRESS_WAKE (1<<14) /* 14: [V4] System supports PCIEXP_WAKE (STS/EN) bits (ACPI 3.0) */
316 #define ACPI_FADT_PLATFORM_CLOCK (1<<15) /* 15: [V4] OSPM should use platform-provided timer (ACPI 3.0) */
317 #define ACPI_FADT_S4_RTC_VALID (1<<16) /* 16: [V4] Contents of RTC_STS valid after S4 wake (ACPI 3.0) */
318 #define ACPI_FADT_REMOTE_POWER_ON (1<<17) /* 17: [V4] System is compatible with remote power on (ACPI 3.0) */
319 #define ACPI_FADT_APIC_CLUSTER (1<<18) /* 18: [V4] All local APICs must use cluster model (ACPI 3.0) */
320 #define ACPI_FADT_APIC_PHYSICAL (1<<19) /* 19: [V4] All local xAPICs must use physical dest mode (ACPI 3.0) */
321 #define ACPI_FADT_HW_REDUCED (1<<20) /* 20: [V5] ACPI hardware is not implemented (ACPI 5.0) */
322 #define ACPI_FADT_LOW_POWER_S0 (1<<21) /* 21: [V5] S0 power savings are equal or better than S3 (ACPI 5.0) */
324 /* Values for preferred_profile (Preferred Power Management Profiles) */
326 enum acpi_preferred_pm_profiles
{
331 PM_ENTERPRISE_SERVER
= 4,
334 PM_PERFORMANCE_SERVER
= 7,
338 /* Values for sleep_status and sleep_control registers (V5 FADT) */
340 #define ACPI_X_WAKE_STATUS 0x80
341 #define ACPI_X_SLEEP_TYPE_MASK 0x1C
342 #define ACPI_X_SLEEP_TYPE_POSITION 0x02
343 #define ACPI_X_SLEEP_ENABLE 0x20
345 /* Reset to default packing */
350 * Internal table-related structures
352 union acpi_name_union
{
357 /* Internal ACPI Table Descriptor. One per ACPI table. */
359 struct acpi_table_desc
{
360 acpi_physical_address address
;
361 struct acpi_table_header
*pointer
;
362 u32 length
; /* Length fixed at 32 bits (fixed in table header) */
363 union acpi_name_union signature
;
364 acpi_owner_id owner_id
;
368 /* Masks for Flags field above */
370 #define ACPI_TABLE_ORIGIN_EXTERNAL_VIRTUAL (0) /* Virtual address, external maintained */
371 #define ACPI_TABLE_ORIGIN_INTERNAL_PHYSICAL (1) /* Physical address, internally mapped */
372 #define ACPI_TABLE_ORIGIN_INTERNAL_VIRTUAL (2) /* Virtual address, internallly allocated */
373 #define ACPI_TABLE_ORIGIN_MASK (3)
374 #define ACPI_TABLE_IS_LOADED (8)
377 * Get the remaining ACPI tables
379 #include <acpi/actbl1.h>
380 #include <acpi/actbl2.h>
381 #include <acpi/actbl3.h>
383 /* Macros used to generate offsets to specific table fields */
385 #define ACPI_FADT_OFFSET(f) (u16) ACPI_OFFSET (struct acpi_table_fadt, f)
388 * Sizes of the various flavors of FADT. We need to look closely
389 * at the FADT length because the version number essentially tells
390 * us nothing because of many BIOS bugs where the version does not
391 * match the expected length. In other words, the length of the
392 * FADT is the bottom line as to what the version really is.
394 * For reference, the values below are as follows:
395 * FADT V1 size: 0x074
396 * FADT V2 size: 0x084
397 * FADT V3 size: 0x0F4
398 * FADT V4 size: 0x0F4
399 * FADT V5 size: 0x10C
401 #define ACPI_FADT_V1_SIZE (u32) (ACPI_FADT_OFFSET (flags) + 4)
402 #define ACPI_FADT_V2_SIZE (u32) (ACPI_FADT_OFFSET (reserved4[0]) + 3)
403 #define ACPI_FADT_V3_SIZE (u32) (ACPI_FADT_OFFSET (sleep_control))
404 #define ACPI_FADT_V5_SIZE (u32) (sizeof (struct acpi_table_fadt))
406 #endif /* __ACTBL_H__ */