of/platform: Initialise default DMA masks
[linux/fpc-iii.git] / drivers / clocksource / sh_cmt.c
blobbbbf37c471a3919f7fb177f0439cd15d020d8d08
1 /*
2 * SuperH Timer Support - CMT
4 * Copyright (C) 2008 Magnus Damm
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2 of the License
10 * This program is distributed in the hope that it will be useful,
11 * but WITHOUT ANY WARRANTY; without even the implied warranty of
12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 * GNU General Public License for more details.
16 #include <linux/clk.h>
17 #include <linux/clockchips.h>
18 #include <linux/clocksource.h>
19 #include <linux/delay.h>
20 #include <linux/err.h>
21 #include <linux/init.h>
22 #include <linux/interrupt.h>
23 #include <linux/io.h>
24 #include <linux/ioport.h>
25 #include <linux/irq.h>
26 #include <linux/module.h>
27 #include <linux/of.h>
28 #include <linux/of_device.h>
29 #include <linux/platform_device.h>
30 #include <linux/pm_domain.h>
31 #include <linux/pm_runtime.h>
32 #include <linux/sh_timer.h>
33 #include <linux/slab.h>
34 #include <linux/spinlock.h>
36 struct sh_cmt_device;
39 * The CMT comes in 5 different identified flavours, depending not only on the
40 * SoC but also on the particular instance. The following table lists the main
41 * characteristics of those flavours.
43 * 16B 32B 32B-F 48B R-Car Gen2
44 * -----------------------------------------------------------------------------
45 * Channels 2 1/4 1 6 2/8
46 * Control Width 16 16 16 16 32
47 * Counter Width 16 32 32 32/48 32/48
48 * Shared Start/Stop Y Y Y Y N
50 * The r8a73a4 / R-Car Gen2 version has a per-channel start/stop register
51 * located in the channel registers block. All other versions have a shared
52 * start/stop register located in the global space.
54 * Channels are indexed from 0 to N-1 in the documentation. The channel index
55 * infers the start/stop bit position in the control register and the channel
56 * registers block address. Some CMT instances have a subset of channels
57 * available, in which case the index in the documentation doesn't match the
58 * "real" index as implemented in hardware. This is for instance the case with
59 * CMT0 on r8a7740, which is a 32-bit variant with a single channel numbered 0
60 * in the documentation but using start/stop bit 5 and having its registers
61 * block at 0x60.
63 * Similarly CMT0 on r8a73a4, r8a7790 and r8a7791, while implementing 32-bit
64 * channels only, is a 48-bit gen2 CMT with the 48-bit channels unavailable.
67 enum sh_cmt_model {
68 SH_CMT_16BIT,
69 SH_CMT_32BIT,
70 SH_CMT_48BIT,
71 SH_CMT0_RCAR_GEN2,
72 SH_CMT1_RCAR_GEN2,
75 struct sh_cmt_info {
76 enum sh_cmt_model model;
78 unsigned int channels_mask;
80 unsigned long width; /* 16 or 32 bit version of hardware block */
81 unsigned long overflow_bit;
82 unsigned long clear_bits;
84 /* callbacks for CMSTR and CMCSR access */
85 unsigned long (*read_control)(void __iomem *base, unsigned long offs);
86 void (*write_control)(void __iomem *base, unsigned long offs,
87 unsigned long value);
89 /* callbacks for CMCNT and CMCOR access */
90 unsigned long (*read_count)(void __iomem *base, unsigned long offs);
91 void (*write_count)(void __iomem *base, unsigned long offs,
92 unsigned long value);
95 struct sh_cmt_channel {
96 struct sh_cmt_device *cmt;
98 unsigned int index; /* Index in the documentation */
99 unsigned int hwidx; /* Real hardware index */
101 void __iomem *iostart;
102 void __iomem *ioctrl;
104 unsigned int timer_bit;
105 unsigned long flags;
106 unsigned long match_value;
107 unsigned long next_match_value;
108 unsigned long max_match_value;
109 raw_spinlock_t lock;
110 struct clock_event_device ced;
111 struct clocksource cs;
112 unsigned long total_cycles;
113 bool cs_enabled;
116 struct sh_cmt_device {
117 struct platform_device *pdev;
119 const struct sh_cmt_info *info;
121 void __iomem *mapbase;
122 struct clk *clk;
123 unsigned long rate;
125 raw_spinlock_t lock; /* Protect the shared start/stop register */
127 struct sh_cmt_channel *channels;
128 unsigned int num_channels;
129 unsigned int hw_channels;
131 bool has_clockevent;
132 bool has_clocksource;
135 #define SH_CMT16_CMCSR_CMF (1 << 7)
136 #define SH_CMT16_CMCSR_CMIE (1 << 6)
137 #define SH_CMT16_CMCSR_CKS8 (0 << 0)
138 #define SH_CMT16_CMCSR_CKS32 (1 << 0)
139 #define SH_CMT16_CMCSR_CKS128 (2 << 0)
140 #define SH_CMT16_CMCSR_CKS512 (3 << 0)
141 #define SH_CMT16_CMCSR_CKS_MASK (3 << 0)
143 #define SH_CMT32_CMCSR_CMF (1 << 15)
144 #define SH_CMT32_CMCSR_OVF (1 << 14)
145 #define SH_CMT32_CMCSR_WRFLG (1 << 13)
146 #define SH_CMT32_CMCSR_STTF (1 << 12)
147 #define SH_CMT32_CMCSR_STPF (1 << 11)
148 #define SH_CMT32_CMCSR_SSIE (1 << 10)
149 #define SH_CMT32_CMCSR_CMS (1 << 9)
150 #define SH_CMT32_CMCSR_CMM (1 << 8)
151 #define SH_CMT32_CMCSR_CMTOUT_IE (1 << 7)
152 #define SH_CMT32_CMCSR_CMR_NONE (0 << 4)
153 #define SH_CMT32_CMCSR_CMR_DMA (1 << 4)
154 #define SH_CMT32_CMCSR_CMR_IRQ (2 << 4)
155 #define SH_CMT32_CMCSR_CMR_MASK (3 << 4)
156 #define SH_CMT32_CMCSR_DBGIVD (1 << 3)
157 #define SH_CMT32_CMCSR_CKS_RCLK8 (4 << 0)
158 #define SH_CMT32_CMCSR_CKS_RCLK32 (5 << 0)
159 #define SH_CMT32_CMCSR_CKS_RCLK128 (6 << 0)
160 #define SH_CMT32_CMCSR_CKS_RCLK1 (7 << 0)
161 #define SH_CMT32_CMCSR_CKS_MASK (7 << 0)
163 static unsigned long sh_cmt_read16(void __iomem *base, unsigned long offs)
165 return ioread16(base + (offs << 1));
168 static unsigned long sh_cmt_read32(void __iomem *base, unsigned long offs)
170 return ioread32(base + (offs << 2));
173 static void sh_cmt_write16(void __iomem *base, unsigned long offs,
174 unsigned long value)
176 iowrite16(value, base + (offs << 1));
179 static void sh_cmt_write32(void __iomem *base, unsigned long offs,
180 unsigned long value)
182 iowrite32(value, base + (offs << 2));
185 static const struct sh_cmt_info sh_cmt_info[] = {
186 [SH_CMT_16BIT] = {
187 .model = SH_CMT_16BIT,
188 .width = 16,
189 .overflow_bit = SH_CMT16_CMCSR_CMF,
190 .clear_bits = ~SH_CMT16_CMCSR_CMF,
191 .read_control = sh_cmt_read16,
192 .write_control = sh_cmt_write16,
193 .read_count = sh_cmt_read16,
194 .write_count = sh_cmt_write16,
196 [SH_CMT_32BIT] = {
197 .model = SH_CMT_32BIT,
198 .width = 32,
199 .overflow_bit = SH_CMT32_CMCSR_CMF,
200 .clear_bits = ~(SH_CMT32_CMCSR_CMF | SH_CMT32_CMCSR_OVF),
201 .read_control = sh_cmt_read16,
202 .write_control = sh_cmt_write16,
203 .read_count = sh_cmt_read32,
204 .write_count = sh_cmt_write32,
206 [SH_CMT_48BIT] = {
207 .model = SH_CMT_48BIT,
208 .channels_mask = 0x3f,
209 .width = 32,
210 .overflow_bit = SH_CMT32_CMCSR_CMF,
211 .clear_bits = ~(SH_CMT32_CMCSR_CMF | SH_CMT32_CMCSR_OVF),
212 .read_control = sh_cmt_read32,
213 .write_control = sh_cmt_write32,
214 .read_count = sh_cmt_read32,
215 .write_count = sh_cmt_write32,
217 [SH_CMT0_RCAR_GEN2] = {
218 .model = SH_CMT0_RCAR_GEN2,
219 .channels_mask = 0x60,
220 .width = 32,
221 .overflow_bit = SH_CMT32_CMCSR_CMF,
222 .clear_bits = ~(SH_CMT32_CMCSR_CMF | SH_CMT32_CMCSR_OVF),
223 .read_control = sh_cmt_read32,
224 .write_control = sh_cmt_write32,
225 .read_count = sh_cmt_read32,
226 .write_count = sh_cmt_write32,
228 [SH_CMT1_RCAR_GEN2] = {
229 .model = SH_CMT1_RCAR_GEN2,
230 .channels_mask = 0xff,
231 .width = 32,
232 .overflow_bit = SH_CMT32_CMCSR_CMF,
233 .clear_bits = ~(SH_CMT32_CMCSR_CMF | SH_CMT32_CMCSR_OVF),
234 .read_control = sh_cmt_read32,
235 .write_control = sh_cmt_write32,
236 .read_count = sh_cmt_read32,
237 .write_count = sh_cmt_write32,
241 #define CMCSR 0 /* channel register */
242 #define CMCNT 1 /* channel register */
243 #define CMCOR 2 /* channel register */
245 static inline unsigned long sh_cmt_read_cmstr(struct sh_cmt_channel *ch)
247 if (ch->iostart)
248 return ch->cmt->info->read_control(ch->iostart, 0);
249 else
250 return ch->cmt->info->read_control(ch->cmt->mapbase, 0);
253 static inline void sh_cmt_write_cmstr(struct sh_cmt_channel *ch,
254 unsigned long value)
256 if (ch->iostart)
257 ch->cmt->info->write_control(ch->iostart, 0, value);
258 else
259 ch->cmt->info->write_control(ch->cmt->mapbase, 0, value);
262 static inline unsigned long sh_cmt_read_cmcsr(struct sh_cmt_channel *ch)
264 return ch->cmt->info->read_control(ch->ioctrl, CMCSR);
267 static inline void sh_cmt_write_cmcsr(struct sh_cmt_channel *ch,
268 unsigned long value)
270 ch->cmt->info->write_control(ch->ioctrl, CMCSR, value);
273 static inline unsigned long sh_cmt_read_cmcnt(struct sh_cmt_channel *ch)
275 return ch->cmt->info->read_count(ch->ioctrl, CMCNT);
278 static inline void sh_cmt_write_cmcnt(struct sh_cmt_channel *ch,
279 unsigned long value)
281 ch->cmt->info->write_count(ch->ioctrl, CMCNT, value);
284 static inline void sh_cmt_write_cmcor(struct sh_cmt_channel *ch,
285 unsigned long value)
287 ch->cmt->info->write_count(ch->ioctrl, CMCOR, value);
290 static unsigned long sh_cmt_get_counter(struct sh_cmt_channel *ch,
291 int *has_wrapped)
293 unsigned long v1, v2, v3;
294 int o1, o2;
296 o1 = sh_cmt_read_cmcsr(ch) & ch->cmt->info->overflow_bit;
298 /* Make sure the timer value is stable. Stolen from acpi_pm.c */
299 do {
300 o2 = o1;
301 v1 = sh_cmt_read_cmcnt(ch);
302 v2 = sh_cmt_read_cmcnt(ch);
303 v3 = sh_cmt_read_cmcnt(ch);
304 o1 = sh_cmt_read_cmcsr(ch) & ch->cmt->info->overflow_bit;
305 } while (unlikely((o1 != o2) || (v1 > v2 && v1 < v3)
306 || (v2 > v3 && v2 < v1) || (v3 > v1 && v3 < v2)));
308 *has_wrapped = o1;
309 return v2;
312 static void sh_cmt_start_stop_ch(struct sh_cmt_channel *ch, int start)
314 unsigned long flags, value;
316 /* start stop register shared by multiple timer channels */
317 raw_spin_lock_irqsave(&ch->cmt->lock, flags);
318 value = sh_cmt_read_cmstr(ch);
320 if (start)
321 value |= 1 << ch->timer_bit;
322 else
323 value &= ~(1 << ch->timer_bit);
325 sh_cmt_write_cmstr(ch, value);
326 raw_spin_unlock_irqrestore(&ch->cmt->lock, flags);
329 static int sh_cmt_enable(struct sh_cmt_channel *ch)
331 int k, ret;
333 pm_runtime_get_sync(&ch->cmt->pdev->dev);
334 dev_pm_syscore_device(&ch->cmt->pdev->dev, true);
336 /* enable clock */
337 ret = clk_enable(ch->cmt->clk);
338 if (ret) {
339 dev_err(&ch->cmt->pdev->dev, "ch%u: cannot enable clock\n",
340 ch->index);
341 goto err0;
344 /* make sure channel is disabled */
345 sh_cmt_start_stop_ch(ch, 0);
347 /* configure channel, periodic mode and maximum timeout */
348 if (ch->cmt->info->width == 16) {
349 sh_cmt_write_cmcsr(ch, SH_CMT16_CMCSR_CMIE |
350 SH_CMT16_CMCSR_CKS512);
351 } else {
352 sh_cmt_write_cmcsr(ch, SH_CMT32_CMCSR_CMM |
353 SH_CMT32_CMCSR_CMTOUT_IE |
354 SH_CMT32_CMCSR_CMR_IRQ |
355 SH_CMT32_CMCSR_CKS_RCLK8);
358 sh_cmt_write_cmcor(ch, 0xffffffff);
359 sh_cmt_write_cmcnt(ch, 0);
362 * According to the sh73a0 user's manual, as CMCNT can be operated
363 * only by the RCLK (Pseudo 32 KHz), there's one restriction on
364 * modifying CMCNT register; two RCLK cycles are necessary before
365 * this register is either read or any modification of the value
366 * it holds is reflected in the LSI's actual operation.
368 * While at it, we're supposed to clear out the CMCNT as of this
369 * moment, so make sure it's processed properly here. This will
370 * take RCLKx2 at maximum.
372 for (k = 0; k < 100; k++) {
373 if (!sh_cmt_read_cmcnt(ch))
374 break;
375 udelay(1);
378 if (sh_cmt_read_cmcnt(ch)) {
379 dev_err(&ch->cmt->pdev->dev, "ch%u: cannot clear CMCNT\n",
380 ch->index);
381 ret = -ETIMEDOUT;
382 goto err1;
385 /* enable channel */
386 sh_cmt_start_stop_ch(ch, 1);
387 return 0;
388 err1:
389 /* stop clock */
390 clk_disable(ch->cmt->clk);
392 err0:
393 return ret;
396 static void sh_cmt_disable(struct sh_cmt_channel *ch)
398 /* disable channel */
399 sh_cmt_start_stop_ch(ch, 0);
401 /* disable interrupts in CMT block */
402 sh_cmt_write_cmcsr(ch, 0);
404 /* stop clock */
405 clk_disable(ch->cmt->clk);
407 dev_pm_syscore_device(&ch->cmt->pdev->dev, false);
408 pm_runtime_put(&ch->cmt->pdev->dev);
411 /* private flags */
412 #define FLAG_CLOCKEVENT (1 << 0)
413 #define FLAG_CLOCKSOURCE (1 << 1)
414 #define FLAG_REPROGRAM (1 << 2)
415 #define FLAG_SKIPEVENT (1 << 3)
416 #define FLAG_IRQCONTEXT (1 << 4)
418 static void sh_cmt_clock_event_program_verify(struct sh_cmt_channel *ch,
419 int absolute)
421 unsigned long new_match;
422 unsigned long value = ch->next_match_value;
423 unsigned long delay = 0;
424 unsigned long now = 0;
425 int has_wrapped;
427 now = sh_cmt_get_counter(ch, &has_wrapped);
428 ch->flags |= FLAG_REPROGRAM; /* force reprogram */
430 if (has_wrapped) {
431 /* we're competing with the interrupt handler.
432 * -> let the interrupt handler reprogram the timer.
433 * -> interrupt number two handles the event.
435 ch->flags |= FLAG_SKIPEVENT;
436 return;
439 if (absolute)
440 now = 0;
442 do {
443 /* reprogram the timer hardware,
444 * but don't save the new match value yet.
446 new_match = now + value + delay;
447 if (new_match > ch->max_match_value)
448 new_match = ch->max_match_value;
450 sh_cmt_write_cmcor(ch, new_match);
452 now = sh_cmt_get_counter(ch, &has_wrapped);
453 if (has_wrapped && (new_match > ch->match_value)) {
454 /* we are changing to a greater match value,
455 * so this wrap must be caused by the counter
456 * matching the old value.
457 * -> first interrupt reprograms the timer.
458 * -> interrupt number two handles the event.
460 ch->flags |= FLAG_SKIPEVENT;
461 break;
464 if (has_wrapped) {
465 /* we are changing to a smaller match value,
466 * so the wrap must be caused by the counter
467 * matching the new value.
468 * -> save programmed match value.
469 * -> let isr handle the event.
471 ch->match_value = new_match;
472 break;
475 /* be safe: verify hardware settings */
476 if (now < new_match) {
477 /* timer value is below match value, all good.
478 * this makes sure we won't miss any match events.
479 * -> save programmed match value.
480 * -> let isr handle the event.
482 ch->match_value = new_match;
483 break;
486 /* the counter has reached a value greater
487 * than our new match value. and since the
488 * has_wrapped flag isn't set we must have
489 * programmed a too close event.
490 * -> increase delay and retry.
492 if (delay)
493 delay <<= 1;
494 else
495 delay = 1;
497 if (!delay)
498 dev_warn(&ch->cmt->pdev->dev, "ch%u: too long delay\n",
499 ch->index);
501 } while (delay);
504 static void __sh_cmt_set_next(struct sh_cmt_channel *ch, unsigned long delta)
506 if (delta > ch->max_match_value)
507 dev_warn(&ch->cmt->pdev->dev, "ch%u: delta out of range\n",
508 ch->index);
510 ch->next_match_value = delta;
511 sh_cmt_clock_event_program_verify(ch, 0);
514 static void sh_cmt_set_next(struct sh_cmt_channel *ch, unsigned long delta)
516 unsigned long flags;
518 raw_spin_lock_irqsave(&ch->lock, flags);
519 __sh_cmt_set_next(ch, delta);
520 raw_spin_unlock_irqrestore(&ch->lock, flags);
523 static irqreturn_t sh_cmt_interrupt(int irq, void *dev_id)
525 struct sh_cmt_channel *ch = dev_id;
527 /* clear flags */
528 sh_cmt_write_cmcsr(ch, sh_cmt_read_cmcsr(ch) &
529 ch->cmt->info->clear_bits);
531 /* update clock source counter to begin with if enabled
532 * the wrap flag should be cleared by the timer specific
533 * isr before we end up here.
535 if (ch->flags & FLAG_CLOCKSOURCE)
536 ch->total_cycles += ch->match_value + 1;
538 if (!(ch->flags & FLAG_REPROGRAM))
539 ch->next_match_value = ch->max_match_value;
541 ch->flags |= FLAG_IRQCONTEXT;
543 if (ch->flags & FLAG_CLOCKEVENT) {
544 if (!(ch->flags & FLAG_SKIPEVENT)) {
545 if (clockevent_state_oneshot(&ch->ced)) {
546 ch->next_match_value = ch->max_match_value;
547 ch->flags |= FLAG_REPROGRAM;
550 ch->ced.event_handler(&ch->ced);
554 ch->flags &= ~FLAG_SKIPEVENT;
556 if (ch->flags & FLAG_REPROGRAM) {
557 ch->flags &= ~FLAG_REPROGRAM;
558 sh_cmt_clock_event_program_verify(ch, 1);
560 if (ch->flags & FLAG_CLOCKEVENT)
561 if ((clockevent_state_shutdown(&ch->ced))
562 || (ch->match_value == ch->next_match_value))
563 ch->flags &= ~FLAG_REPROGRAM;
566 ch->flags &= ~FLAG_IRQCONTEXT;
568 return IRQ_HANDLED;
571 static int sh_cmt_start(struct sh_cmt_channel *ch, unsigned long flag)
573 int ret = 0;
574 unsigned long flags;
576 raw_spin_lock_irqsave(&ch->lock, flags);
578 if (!(ch->flags & (FLAG_CLOCKEVENT | FLAG_CLOCKSOURCE)))
579 ret = sh_cmt_enable(ch);
581 if (ret)
582 goto out;
583 ch->flags |= flag;
585 /* setup timeout if no clockevent */
586 if ((flag == FLAG_CLOCKSOURCE) && (!(ch->flags & FLAG_CLOCKEVENT)))
587 __sh_cmt_set_next(ch, ch->max_match_value);
588 out:
589 raw_spin_unlock_irqrestore(&ch->lock, flags);
591 return ret;
594 static void sh_cmt_stop(struct sh_cmt_channel *ch, unsigned long flag)
596 unsigned long flags;
597 unsigned long f;
599 raw_spin_lock_irqsave(&ch->lock, flags);
601 f = ch->flags & (FLAG_CLOCKEVENT | FLAG_CLOCKSOURCE);
602 ch->flags &= ~flag;
604 if (f && !(ch->flags & (FLAG_CLOCKEVENT | FLAG_CLOCKSOURCE)))
605 sh_cmt_disable(ch);
607 /* adjust the timeout to maximum if only clocksource left */
608 if ((flag == FLAG_CLOCKEVENT) && (ch->flags & FLAG_CLOCKSOURCE))
609 __sh_cmt_set_next(ch, ch->max_match_value);
611 raw_spin_unlock_irqrestore(&ch->lock, flags);
614 static struct sh_cmt_channel *cs_to_sh_cmt(struct clocksource *cs)
616 return container_of(cs, struct sh_cmt_channel, cs);
619 static u64 sh_cmt_clocksource_read(struct clocksource *cs)
621 struct sh_cmt_channel *ch = cs_to_sh_cmt(cs);
622 unsigned long flags, raw;
623 unsigned long value;
624 int has_wrapped;
626 raw_spin_lock_irqsave(&ch->lock, flags);
627 value = ch->total_cycles;
628 raw = sh_cmt_get_counter(ch, &has_wrapped);
630 if (unlikely(has_wrapped))
631 raw += ch->match_value + 1;
632 raw_spin_unlock_irqrestore(&ch->lock, flags);
634 return value + raw;
637 static int sh_cmt_clocksource_enable(struct clocksource *cs)
639 int ret;
640 struct sh_cmt_channel *ch = cs_to_sh_cmt(cs);
642 WARN_ON(ch->cs_enabled);
644 ch->total_cycles = 0;
646 ret = sh_cmt_start(ch, FLAG_CLOCKSOURCE);
647 if (!ret)
648 ch->cs_enabled = true;
650 return ret;
653 static void sh_cmt_clocksource_disable(struct clocksource *cs)
655 struct sh_cmt_channel *ch = cs_to_sh_cmt(cs);
657 WARN_ON(!ch->cs_enabled);
659 sh_cmt_stop(ch, FLAG_CLOCKSOURCE);
660 ch->cs_enabled = false;
663 static void sh_cmt_clocksource_suspend(struct clocksource *cs)
665 struct sh_cmt_channel *ch = cs_to_sh_cmt(cs);
667 if (!ch->cs_enabled)
668 return;
670 sh_cmt_stop(ch, FLAG_CLOCKSOURCE);
671 pm_genpd_syscore_poweroff(&ch->cmt->pdev->dev);
674 static void sh_cmt_clocksource_resume(struct clocksource *cs)
676 struct sh_cmt_channel *ch = cs_to_sh_cmt(cs);
678 if (!ch->cs_enabled)
679 return;
681 pm_genpd_syscore_poweron(&ch->cmt->pdev->dev);
682 sh_cmt_start(ch, FLAG_CLOCKSOURCE);
685 static int sh_cmt_register_clocksource(struct sh_cmt_channel *ch,
686 const char *name)
688 struct clocksource *cs = &ch->cs;
690 cs->name = name;
691 cs->rating = 125;
692 cs->read = sh_cmt_clocksource_read;
693 cs->enable = sh_cmt_clocksource_enable;
694 cs->disable = sh_cmt_clocksource_disable;
695 cs->suspend = sh_cmt_clocksource_suspend;
696 cs->resume = sh_cmt_clocksource_resume;
697 cs->mask = CLOCKSOURCE_MASK(sizeof(unsigned long) * 8);
698 cs->flags = CLOCK_SOURCE_IS_CONTINUOUS;
700 dev_info(&ch->cmt->pdev->dev, "ch%u: used as clock source\n",
701 ch->index);
703 clocksource_register_hz(cs, ch->cmt->rate);
704 return 0;
707 static struct sh_cmt_channel *ced_to_sh_cmt(struct clock_event_device *ced)
709 return container_of(ced, struct sh_cmt_channel, ced);
712 static void sh_cmt_clock_event_start(struct sh_cmt_channel *ch, int periodic)
714 sh_cmt_start(ch, FLAG_CLOCKEVENT);
716 if (periodic)
717 sh_cmt_set_next(ch, ((ch->cmt->rate + HZ/2) / HZ) - 1);
718 else
719 sh_cmt_set_next(ch, ch->max_match_value);
722 static int sh_cmt_clock_event_shutdown(struct clock_event_device *ced)
724 struct sh_cmt_channel *ch = ced_to_sh_cmt(ced);
726 sh_cmt_stop(ch, FLAG_CLOCKEVENT);
727 return 0;
730 static int sh_cmt_clock_event_set_state(struct clock_event_device *ced,
731 int periodic)
733 struct sh_cmt_channel *ch = ced_to_sh_cmt(ced);
735 /* deal with old setting first */
736 if (clockevent_state_oneshot(ced) || clockevent_state_periodic(ced))
737 sh_cmt_stop(ch, FLAG_CLOCKEVENT);
739 dev_info(&ch->cmt->pdev->dev, "ch%u: used for %s clock events\n",
740 ch->index, periodic ? "periodic" : "oneshot");
741 sh_cmt_clock_event_start(ch, periodic);
742 return 0;
745 static int sh_cmt_clock_event_set_oneshot(struct clock_event_device *ced)
747 return sh_cmt_clock_event_set_state(ced, 0);
750 static int sh_cmt_clock_event_set_periodic(struct clock_event_device *ced)
752 return sh_cmt_clock_event_set_state(ced, 1);
755 static int sh_cmt_clock_event_next(unsigned long delta,
756 struct clock_event_device *ced)
758 struct sh_cmt_channel *ch = ced_to_sh_cmt(ced);
760 BUG_ON(!clockevent_state_oneshot(ced));
761 if (likely(ch->flags & FLAG_IRQCONTEXT))
762 ch->next_match_value = delta - 1;
763 else
764 sh_cmt_set_next(ch, delta - 1);
766 return 0;
769 static void sh_cmt_clock_event_suspend(struct clock_event_device *ced)
771 struct sh_cmt_channel *ch = ced_to_sh_cmt(ced);
773 pm_genpd_syscore_poweroff(&ch->cmt->pdev->dev);
774 clk_unprepare(ch->cmt->clk);
777 static void sh_cmt_clock_event_resume(struct clock_event_device *ced)
779 struct sh_cmt_channel *ch = ced_to_sh_cmt(ced);
781 clk_prepare(ch->cmt->clk);
782 pm_genpd_syscore_poweron(&ch->cmt->pdev->dev);
785 static int sh_cmt_register_clockevent(struct sh_cmt_channel *ch,
786 const char *name)
788 struct clock_event_device *ced = &ch->ced;
789 int irq;
790 int ret;
792 irq = platform_get_irq(ch->cmt->pdev, ch->index);
793 if (irq < 0) {
794 dev_err(&ch->cmt->pdev->dev, "ch%u: failed to get irq\n",
795 ch->index);
796 return irq;
799 ret = request_irq(irq, sh_cmt_interrupt,
800 IRQF_TIMER | IRQF_IRQPOLL | IRQF_NOBALANCING,
801 dev_name(&ch->cmt->pdev->dev), ch);
802 if (ret) {
803 dev_err(&ch->cmt->pdev->dev, "ch%u: failed to request irq %d\n",
804 ch->index, irq);
805 return ret;
808 ced->name = name;
809 ced->features = CLOCK_EVT_FEAT_PERIODIC;
810 ced->features |= CLOCK_EVT_FEAT_ONESHOT;
811 ced->rating = 125;
812 ced->cpumask = cpu_possible_mask;
813 ced->set_next_event = sh_cmt_clock_event_next;
814 ced->set_state_shutdown = sh_cmt_clock_event_shutdown;
815 ced->set_state_periodic = sh_cmt_clock_event_set_periodic;
816 ced->set_state_oneshot = sh_cmt_clock_event_set_oneshot;
817 ced->suspend = sh_cmt_clock_event_suspend;
818 ced->resume = sh_cmt_clock_event_resume;
820 /* TODO: calculate good shift from rate and counter bit width */
821 ced->shift = 32;
822 ced->mult = div_sc(ch->cmt->rate, NSEC_PER_SEC, ced->shift);
823 ced->max_delta_ns = clockevent_delta2ns(ch->max_match_value, ced);
824 ced->max_delta_ticks = ch->max_match_value;
825 ced->min_delta_ns = clockevent_delta2ns(0x1f, ced);
826 ced->min_delta_ticks = 0x1f;
828 dev_info(&ch->cmt->pdev->dev, "ch%u: used for clock events\n",
829 ch->index);
830 clockevents_register_device(ced);
832 return 0;
835 static int sh_cmt_register(struct sh_cmt_channel *ch, const char *name,
836 bool clockevent, bool clocksource)
838 int ret;
840 if (clockevent) {
841 ch->cmt->has_clockevent = true;
842 ret = sh_cmt_register_clockevent(ch, name);
843 if (ret < 0)
844 return ret;
847 if (clocksource) {
848 ch->cmt->has_clocksource = true;
849 sh_cmt_register_clocksource(ch, name);
852 return 0;
855 static int sh_cmt_setup_channel(struct sh_cmt_channel *ch, unsigned int index,
856 unsigned int hwidx, bool clockevent,
857 bool clocksource, struct sh_cmt_device *cmt)
859 int ret;
861 /* Skip unused channels. */
862 if (!clockevent && !clocksource)
863 return 0;
865 ch->cmt = cmt;
866 ch->index = index;
867 ch->hwidx = hwidx;
868 ch->timer_bit = hwidx;
871 * Compute the address of the channel control register block. For the
872 * timers with a per-channel start/stop register, compute its address
873 * as well.
875 switch (cmt->info->model) {
876 case SH_CMT_16BIT:
877 ch->ioctrl = cmt->mapbase + 2 + ch->hwidx * 6;
878 break;
879 case SH_CMT_32BIT:
880 case SH_CMT_48BIT:
881 ch->ioctrl = cmt->mapbase + 0x10 + ch->hwidx * 0x10;
882 break;
883 case SH_CMT0_RCAR_GEN2:
884 case SH_CMT1_RCAR_GEN2:
885 ch->iostart = cmt->mapbase + ch->hwidx * 0x100;
886 ch->ioctrl = ch->iostart + 0x10;
887 ch->timer_bit = 0;
888 break;
891 if (cmt->info->width == (sizeof(ch->max_match_value) * 8))
892 ch->max_match_value = ~0;
893 else
894 ch->max_match_value = (1 << cmt->info->width) - 1;
896 ch->match_value = ch->max_match_value;
897 raw_spin_lock_init(&ch->lock);
899 ret = sh_cmt_register(ch, dev_name(&cmt->pdev->dev),
900 clockevent, clocksource);
901 if (ret) {
902 dev_err(&cmt->pdev->dev, "ch%u: registration failed\n",
903 ch->index);
904 return ret;
906 ch->cs_enabled = false;
908 return 0;
911 static int sh_cmt_map_memory(struct sh_cmt_device *cmt)
913 struct resource *mem;
915 mem = platform_get_resource(cmt->pdev, IORESOURCE_MEM, 0);
916 if (!mem) {
917 dev_err(&cmt->pdev->dev, "failed to get I/O memory\n");
918 return -ENXIO;
921 cmt->mapbase = ioremap_nocache(mem->start, resource_size(mem));
922 if (cmt->mapbase == NULL) {
923 dev_err(&cmt->pdev->dev, "failed to remap I/O memory\n");
924 return -ENXIO;
927 return 0;
930 static const struct platform_device_id sh_cmt_id_table[] = {
931 { "sh-cmt-16", (kernel_ulong_t)&sh_cmt_info[SH_CMT_16BIT] },
932 { "sh-cmt-32", (kernel_ulong_t)&sh_cmt_info[SH_CMT_32BIT] },
935 MODULE_DEVICE_TABLE(platform, sh_cmt_id_table);
937 static const struct of_device_id sh_cmt_of_table[] __maybe_unused = {
938 { .compatible = "renesas,cmt-48", .data = &sh_cmt_info[SH_CMT_48BIT] },
940 /* deprecated, preserved for backward compatibility */
941 .compatible = "renesas,cmt-48-gen2",
942 .data = &sh_cmt_info[SH_CMT0_RCAR_GEN2]
944 { .compatible = "renesas,rcar-gen2-cmt0", .data = &sh_cmt_info[SH_CMT0_RCAR_GEN2] },
945 { .compatible = "renesas,rcar-gen2-cmt1", .data = &sh_cmt_info[SH_CMT1_RCAR_GEN2] },
948 MODULE_DEVICE_TABLE(of, sh_cmt_of_table);
950 static int sh_cmt_setup(struct sh_cmt_device *cmt, struct platform_device *pdev)
952 unsigned int mask;
953 unsigned int i;
954 int ret;
956 cmt->pdev = pdev;
957 raw_spin_lock_init(&cmt->lock);
959 if (IS_ENABLED(CONFIG_OF) && pdev->dev.of_node) {
960 cmt->info = of_device_get_match_data(&pdev->dev);
961 cmt->hw_channels = cmt->info->channels_mask;
962 } else if (pdev->dev.platform_data) {
963 struct sh_timer_config *cfg = pdev->dev.platform_data;
964 const struct platform_device_id *id = pdev->id_entry;
966 cmt->info = (const struct sh_cmt_info *)id->driver_data;
967 cmt->hw_channels = cfg->channels_mask;
968 } else {
969 dev_err(&cmt->pdev->dev, "missing platform data\n");
970 return -ENXIO;
973 /* Get hold of clock. */
974 cmt->clk = clk_get(&cmt->pdev->dev, "fck");
975 if (IS_ERR(cmt->clk)) {
976 dev_err(&cmt->pdev->dev, "cannot get clock\n");
977 return PTR_ERR(cmt->clk);
980 ret = clk_prepare(cmt->clk);
981 if (ret < 0)
982 goto err_clk_put;
984 /* Determine clock rate. */
985 ret = clk_enable(cmt->clk);
986 if (ret < 0)
987 goto err_clk_unprepare;
989 if (cmt->info->width == 16)
990 cmt->rate = clk_get_rate(cmt->clk) / 512;
991 else
992 cmt->rate = clk_get_rate(cmt->clk) / 8;
994 clk_disable(cmt->clk);
996 /* Map the memory resource(s). */
997 ret = sh_cmt_map_memory(cmt);
998 if (ret < 0)
999 goto err_clk_unprepare;
1001 /* Allocate and setup the channels. */
1002 cmt->num_channels = hweight8(cmt->hw_channels);
1003 cmt->channels = kcalloc(cmt->num_channels, sizeof(*cmt->channels),
1004 GFP_KERNEL);
1005 if (cmt->channels == NULL) {
1006 ret = -ENOMEM;
1007 goto err_unmap;
1011 * Use the first channel as a clock event device and the second channel
1012 * as a clock source. If only one channel is available use it for both.
1014 for (i = 0, mask = cmt->hw_channels; i < cmt->num_channels; ++i) {
1015 unsigned int hwidx = ffs(mask) - 1;
1016 bool clocksource = i == 1 || cmt->num_channels == 1;
1017 bool clockevent = i == 0;
1019 ret = sh_cmt_setup_channel(&cmt->channels[i], i, hwidx,
1020 clockevent, clocksource, cmt);
1021 if (ret < 0)
1022 goto err_unmap;
1024 mask &= ~(1 << hwidx);
1027 platform_set_drvdata(pdev, cmt);
1029 return 0;
1031 err_unmap:
1032 kfree(cmt->channels);
1033 iounmap(cmt->mapbase);
1034 err_clk_unprepare:
1035 clk_unprepare(cmt->clk);
1036 err_clk_put:
1037 clk_put(cmt->clk);
1038 return ret;
1041 static int sh_cmt_probe(struct platform_device *pdev)
1043 struct sh_cmt_device *cmt = platform_get_drvdata(pdev);
1044 int ret;
1046 if (!is_early_platform_device(pdev)) {
1047 pm_runtime_set_active(&pdev->dev);
1048 pm_runtime_enable(&pdev->dev);
1051 if (cmt) {
1052 dev_info(&pdev->dev, "kept as earlytimer\n");
1053 goto out;
1056 cmt = kzalloc(sizeof(*cmt), GFP_KERNEL);
1057 if (cmt == NULL)
1058 return -ENOMEM;
1060 ret = sh_cmt_setup(cmt, pdev);
1061 if (ret) {
1062 kfree(cmt);
1063 pm_runtime_idle(&pdev->dev);
1064 return ret;
1066 if (is_early_platform_device(pdev))
1067 return 0;
1069 out:
1070 if (cmt->has_clockevent || cmt->has_clocksource)
1071 pm_runtime_irq_safe(&pdev->dev);
1072 else
1073 pm_runtime_idle(&pdev->dev);
1075 return 0;
1078 static int sh_cmt_remove(struct platform_device *pdev)
1080 return -EBUSY; /* cannot unregister clockevent and clocksource */
1083 static struct platform_driver sh_cmt_device_driver = {
1084 .probe = sh_cmt_probe,
1085 .remove = sh_cmt_remove,
1086 .driver = {
1087 .name = "sh_cmt",
1088 .of_match_table = of_match_ptr(sh_cmt_of_table),
1090 .id_table = sh_cmt_id_table,
1093 static int __init sh_cmt_init(void)
1095 return platform_driver_register(&sh_cmt_device_driver);
1098 static void __exit sh_cmt_exit(void)
1100 platform_driver_unregister(&sh_cmt_device_driver);
1103 early_platform_init("earlytimer", &sh_cmt_device_driver);
1104 subsys_initcall(sh_cmt_init);
1105 module_exit(sh_cmt_exit);
1107 MODULE_AUTHOR("Magnus Damm");
1108 MODULE_DESCRIPTION("SuperH CMT Timer Driver");
1109 MODULE_LICENSE("GPL v2");