mm/slab: sanity-check page type when looking up cache
[linux/fpc-iii.git] / drivers / gpio / gpio-vx855.c
blob4ff146ca32fecad74be7c13e35fec281e424ccfa
1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3 * Linux GPIOlib driver for the VIA VX855 integrated southbridge GPIO
5 * Copyright (C) 2009 VIA Technologies, Inc.
6 * Copyright (C) 2010 One Laptop per Child
7 * Author: Harald Welte <HaraldWelte@viatech.com>
8 * All rights reserved.
9 */
10 #include <linux/kernel.h>
11 #include <linux/module.h>
12 #include <linux/gpio/driver.h>
13 #include <linux/slab.h>
14 #include <linux/device.h>
15 #include <linux/platform_device.h>
16 #include <linux/pci.h>
17 #include <linux/io.h>
19 #define MODULE_NAME "vx855_gpio"
21 /* The VX855 south bridge has the following GPIO pins:
22 * GPI 0...13 General Purpose Input
23 * GPO 0...12 General Purpose Output
24 * GPIO 0...14 General Purpose I/O (Open-Drain)
27 #define NR_VX855_GPI 14
28 #define NR_VX855_GPO 13
29 #define NR_VX855_GPIO 15
31 #define NR_VX855_GPInO (NR_VX855_GPI + NR_VX855_GPO)
32 #define NR_VX855_GP (NR_VX855_GPI + NR_VX855_GPO + NR_VX855_GPIO)
34 struct vx855_gpio {
35 struct gpio_chip gpio;
36 spinlock_t lock;
37 u32 io_gpi;
38 u32 io_gpo;
41 /* resolve a GPIx into the corresponding bit position */
42 static inline u_int32_t gpi_i_bit(int i)
44 if (i < 10)
45 return 1 << i;
46 else
47 return 1 << (i + 14);
50 static inline u_int32_t gpo_o_bit(int i)
52 if (i < 11)
53 return 1 << i;
54 else
55 return 1 << (i + 14);
58 static inline u_int32_t gpio_i_bit(int i)
60 if (i < 14)
61 return 1 << (i + 10);
62 else
63 return 1 << (i + 14);
66 static inline u_int32_t gpio_o_bit(int i)
68 if (i < 14)
69 return 1 << (i + 11);
70 else
71 return 1 << (i + 13);
74 /* Mapping betwee numeric GPIO ID and the actual GPIO hardware numbering:
75 * 0..13 GPI 0..13
76 * 14..26 GPO 0..12
77 * 27..41 GPIO 0..14
80 static int vx855gpio_direction_input(struct gpio_chip *gpio,
81 unsigned int nr)
83 struct vx855_gpio *vg = gpiochip_get_data(gpio);
84 unsigned long flags;
85 u_int32_t reg_out;
87 /* Real GPI bits are always in input direction */
88 if (nr < NR_VX855_GPI)
89 return 0;
91 /* Real GPO bits cannot be put in output direction */
92 if (nr < NR_VX855_GPInO)
93 return -EINVAL;
95 /* Open Drain GPIO have to be set to one */
96 spin_lock_irqsave(&vg->lock, flags);
97 reg_out = inl(vg->io_gpo);
98 reg_out |= gpio_o_bit(nr - NR_VX855_GPInO);
99 outl(reg_out, vg->io_gpo);
100 spin_unlock_irqrestore(&vg->lock, flags);
102 return 0;
105 static int vx855gpio_get(struct gpio_chip *gpio, unsigned int nr)
107 struct vx855_gpio *vg = gpiochip_get_data(gpio);
108 u_int32_t reg_in;
109 int ret = 0;
111 if (nr < NR_VX855_GPI) {
112 reg_in = inl(vg->io_gpi);
113 if (reg_in & gpi_i_bit(nr))
114 ret = 1;
115 } else if (nr < NR_VX855_GPInO) {
116 /* GPO don't have an input bit, we need to read it
117 * back from the output register */
118 reg_in = inl(vg->io_gpo);
119 if (reg_in & gpo_o_bit(nr - NR_VX855_GPI))
120 ret = 1;
121 } else {
122 reg_in = inl(vg->io_gpi);
123 if (reg_in & gpio_i_bit(nr - NR_VX855_GPInO))
124 ret = 1;
127 return ret;
130 static void vx855gpio_set(struct gpio_chip *gpio, unsigned int nr,
131 int val)
133 struct vx855_gpio *vg = gpiochip_get_data(gpio);
134 unsigned long flags;
135 u_int32_t reg_out;
137 /* True GPI cannot be switched to output mode */
138 if (nr < NR_VX855_GPI)
139 return;
141 spin_lock_irqsave(&vg->lock, flags);
142 reg_out = inl(vg->io_gpo);
143 if (nr < NR_VX855_GPInO) {
144 if (val)
145 reg_out |= gpo_o_bit(nr - NR_VX855_GPI);
146 else
147 reg_out &= ~gpo_o_bit(nr - NR_VX855_GPI);
148 } else {
149 if (val)
150 reg_out |= gpio_o_bit(nr - NR_VX855_GPInO);
151 else
152 reg_out &= ~gpio_o_bit(nr - NR_VX855_GPInO);
154 outl(reg_out, vg->io_gpo);
155 spin_unlock_irqrestore(&vg->lock, flags);
158 static int vx855gpio_direction_output(struct gpio_chip *gpio,
159 unsigned int nr, int val)
161 /* True GPI cannot be switched to output mode */
162 if (nr < NR_VX855_GPI)
163 return -EINVAL;
165 /* True GPO don't need to be switched to output mode,
166 * and GPIO are open-drain, i.e. also need no switching,
167 * so all we do is set the level */
168 vx855gpio_set(gpio, nr, val);
170 return 0;
173 static int vx855gpio_set_config(struct gpio_chip *gpio, unsigned int nr,
174 unsigned long config)
176 enum pin_config_param param = pinconf_to_config_param(config);
178 /* The GPI cannot be single-ended */
179 if (nr < NR_VX855_GPI)
180 return -EINVAL;
182 /* The GPO's are push-pull */
183 if (nr < NR_VX855_GPInO) {
184 if (param != PIN_CONFIG_DRIVE_PUSH_PULL)
185 return -ENOTSUPP;
186 return 0;
189 /* The GPIO's are open drain */
190 if (param != PIN_CONFIG_DRIVE_OPEN_DRAIN)
191 return -ENOTSUPP;
193 return 0;
196 static const char *vx855gpio_names[NR_VX855_GP] = {
197 "VX855_GPI0", "VX855_GPI1", "VX855_GPI2", "VX855_GPI3", "VX855_GPI4",
198 "VX855_GPI5", "VX855_GPI6", "VX855_GPI7", "VX855_GPI8", "VX855_GPI9",
199 "VX855_GPI10", "VX855_GPI11", "VX855_GPI12", "VX855_GPI13",
200 "VX855_GPO0", "VX855_GPO1", "VX855_GPO2", "VX855_GPO3", "VX855_GPO4",
201 "VX855_GPO5", "VX855_GPO6", "VX855_GPO7", "VX855_GPO8", "VX855_GPO9",
202 "VX855_GPO10", "VX855_GPO11", "VX855_GPO12",
203 "VX855_GPIO0", "VX855_GPIO1", "VX855_GPIO2", "VX855_GPIO3",
204 "VX855_GPIO4", "VX855_GPIO5", "VX855_GPIO6", "VX855_GPIO7",
205 "VX855_GPIO8", "VX855_GPIO9", "VX855_GPIO10", "VX855_GPIO11",
206 "VX855_GPIO12", "VX855_GPIO13", "VX855_GPIO14"
209 static void vx855gpio_gpio_setup(struct vx855_gpio *vg)
211 struct gpio_chip *c = &vg->gpio;
213 c->label = "VX855 South Bridge";
214 c->owner = THIS_MODULE;
215 c->direction_input = vx855gpio_direction_input;
216 c->direction_output = vx855gpio_direction_output;
217 c->get = vx855gpio_get;
218 c->set = vx855gpio_set;
219 c->set_config = vx855gpio_set_config,
220 c->dbg_show = NULL;
221 c->base = 0;
222 c->ngpio = NR_VX855_GP;
223 c->can_sleep = false;
224 c->names = vx855gpio_names;
227 /* This platform device is ordinarily registered by the vx855 mfd driver */
228 static int vx855gpio_probe(struct platform_device *pdev)
230 struct resource *res_gpi;
231 struct resource *res_gpo;
232 struct vx855_gpio *vg;
234 res_gpi = platform_get_resource(pdev, IORESOURCE_IO, 0);
235 res_gpo = platform_get_resource(pdev, IORESOURCE_IO, 1);
236 if (!res_gpi || !res_gpo)
237 return -EBUSY;
239 vg = devm_kzalloc(&pdev->dev, sizeof(*vg), GFP_KERNEL);
240 if (!vg)
241 return -ENOMEM;
243 platform_set_drvdata(pdev, vg);
245 dev_info(&pdev->dev, "found VX855 GPIO controller\n");
246 vg->io_gpi = res_gpi->start;
247 vg->io_gpo = res_gpo->start;
248 spin_lock_init(&vg->lock);
251 * A single byte is used to control various GPIO ports on the VX855,
252 * and in the case of the OLPC XO-1.5, some of those ports are used
253 * for switches that are interpreted and exposed through ACPI. ACPI
254 * will have reserved the region, so our own reservation will not
255 * succeed. Ignore and continue.
258 if (!devm_request_region(&pdev->dev, res_gpi->start,
259 resource_size(res_gpi), MODULE_NAME "_gpi"))
260 dev_warn(&pdev->dev,
261 "GPI I/O resource busy, probably claimed by ACPI\n");
263 if (!devm_request_region(&pdev->dev, res_gpo->start,
264 resource_size(res_gpo), MODULE_NAME "_gpo"))
265 dev_warn(&pdev->dev,
266 "GPO I/O resource busy, probably claimed by ACPI\n");
268 vx855gpio_gpio_setup(vg);
270 return devm_gpiochip_add_data(&pdev->dev, &vg->gpio, vg);
273 static struct platform_driver vx855gpio_driver = {
274 .driver = {
275 .name = MODULE_NAME,
277 .probe = vx855gpio_probe,
280 module_platform_driver(vx855gpio_driver);
282 MODULE_LICENSE("GPL");
283 MODULE_AUTHOR("Harald Welte <HaraldWelte@viatech.com>");
284 MODULE_DESCRIPTION("GPIO driver for the VIA VX855 chipset");
285 MODULE_ALIAS("platform:vx855_gpio");