1 /* SPDX-License-Identifier: GPL-2.0 */
2 #include <linux/suspend.h>
3 #include <linux/suspend_ioctls.h>
4 #include <linux/utsname.h>
5 #include <linux/freezer.h>
6 #include <linux/compiler.h>
9 struct new_utsname uts
;
11 unsigned long num_physpages
;
13 unsigned long image_pages
;
16 } __aligned(PAGE_SIZE
);
18 #ifdef CONFIG_HIBERNATION
19 /* kernel/power/snapshot.c */
20 extern void __init
hibernate_reserved_size_init(void);
21 extern void __init
hibernate_image_size_init(void);
23 #ifdef CONFIG_ARCH_HIBERNATION_HEADER
24 /* Maximum size of architecture specific data in a hibernation header */
25 #define MAX_ARCH_HEADER_SIZE (sizeof(struct new_utsname) + 4)
27 extern int arch_hibernation_header_save(void *addr
, unsigned int max_size
);
28 extern int arch_hibernation_header_restore(void *addr
);
30 static inline int init_header_complete(struct swsusp_info
*info
)
32 return arch_hibernation_header_save(info
, MAX_ARCH_HEADER_SIZE
);
35 static inline char *check_image_kernel(struct swsusp_info
*info
)
37 return arch_hibernation_header_restore(info
) ?
38 "architecture specific data" : NULL
;
40 #endif /* CONFIG_ARCH_HIBERNATION_HEADER */
42 extern int hibernate_resume_nonboot_cpu_disable(void);
45 * Keep some memory free so that I/O operations can succeed without paging
46 * [Might this be more than 4 MB?]
48 #define PAGES_FOR_IO ((4096 * 1024) >> PAGE_SHIFT)
51 * Keep 1 MB of memory free so that device drivers can allocate some pages in
52 * their .suspend() routines without breaking the suspend to disk.
54 #define SPARE_PAGES ((1024 * 1024) >> PAGE_SHIFT)
56 asmlinkage
int swsusp_save(void);
58 /* kernel/power/hibernate.c */
59 extern bool freezer_test_done
;
61 extern int hibernation_snapshot(int platform_mode
);
62 extern int hibernation_restore(int platform_mode
);
63 extern int hibernation_platform_enter(void);
65 #ifdef CONFIG_STRICT_KERNEL_RWX
66 /* kernel/power/snapshot.c */
67 extern void enable_restore_image_protection(void);
69 static inline void enable_restore_image_protection(void) {}
70 #endif /* CONFIG_STRICT_KERNEL_RWX */
72 #else /* !CONFIG_HIBERNATION */
74 static inline void hibernate_reserved_size_init(void) {}
75 static inline void hibernate_image_size_init(void) {}
76 #endif /* !CONFIG_HIBERNATION */
78 #define power_attr(_name) \
79 static struct kobj_attribute _name##_attr = { \
81 .name = __stringify(_name), \
84 .show = _name##_show, \
85 .store = _name##_store, \
88 #define power_attr_ro(_name) \
89 static struct kobj_attribute _name##_attr = { \
91 .name = __stringify(_name), \
94 .show = _name##_show, \
97 /* Preferred image size in bytes (default 500 MB) */
98 extern unsigned long image_size
;
99 /* Size of memory reserved for drivers (default SPARE_PAGES x PAGE_SIZE) */
100 extern unsigned long reserved_size
;
101 extern int in_suspend
;
102 extern dev_t swsusp_resume_device
;
103 extern sector_t swsusp_resume_block
;
105 extern int create_basic_memory_bitmaps(void);
106 extern void free_basic_memory_bitmaps(void);
107 extern int hibernate_preallocate_memory(void);
109 extern void clear_free_pages(void);
112 * Auxiliary structure used for reading the snapshot image data and
113 * metadata from and writing them to the list of page backup entries
114 * (PBEs) which is the main data structure of swsusp.
116 * Using struct snapshot_handle we can transfer the image, including its
117 * metadata, as a continuous sequence of bytes with the help of
118 * snapshot_read_next() and snapshot_write_next().
120 * The code that writes the image to a storage or transfers it to
121 * the user land is required to use snapshot_read_next() for this
122 * purpose and it should not make any assumptions regarding the internal
123 * structure of the image. Similarly, the code that reads the image from
124 * a storage or transfers it from the user land is required to use
125 * snapshot_write_next().
127 * This may allow us to change the internal structure of the image
128 * in the future with considerably less effort.
131 struct snapshot_handle
{
132 unsigned int cur
; /* number of the block of PAGE_SIZE bytes the
133 * next operation will refer to (ie. current)
135 void *buffer
; /* address of the block to read from
138 int sync_read
; /* Set to one to notify the caller of
139 * snapshot_write_next() that it may
140 * need to call wait_on_bio_chain()
144 /* This macro returns the address from/to which the caller of
145 * snapshot_read_next()/snapshot_write_next() is allowed to
146 * read/write data after the function returns
148 #define data_of(handle) ((handle).buffer)
150 extern unsigned int snapshot_additional_pages(struct zone
*zone
);
151 extern unsigned long snapshot_get_image_size(void);
152 extern int snapshot_read_next(struct snapshot_handle
*handle
);
153 extern int snapshot_write_next(struct snapshot_handle
*handle
);
154 extern void snapshot_write_finalize(struct snapshot_handle
*handle
);
155 extern int snapshot_image_loaded(struct snapshot_handle
*handle
);
157 /* If unset, the snapshot device cannot be open. */
158 extern atomic_t snapshot_device_available
;
160 extern sector_t
alloc_swapdev_block(int swap
);
161 extern void free_all_swap_pages(int swap
);
162 extern int swsusp_swap_in_use(void);
165 * Flags that can be passed from the hibernatig hernel to the "boot" kernel in
168 #define SF_PLATFORM_MODE 1
169 #define SF_NOCOMPRESS_MODE 2
170 #define SF_CRC32_MODE 4
172 /* kernel/power/hibernate.c */
173 extern int swsusp_check(void);
174 extern void swsusp_free(void);
175 extern int swsusp_read(unsigned int *flags_p
);
176 extern int swsusp_write(unsigned int flags
);
177 extern void swsusp_close(fmode_t
);
178 #ifdef CONFIG_SUSPEND
179 extern int swsusp_unmark(void);
183 /* kernel/power/swsusp.c */
184 extern void swsusp_show_speed(ktime_t
, ktime_t
, unsigned int, char *);
186 #ifdef CONFIG_SUSPEND
187 /* kernel/power/suspend.c */
188 extern const char * const pm_labels
[];
189 extern const char *pm_states
[];
190 extern const char *mem_sleep_states
[];
192 extern int suspend_devices_and_enter(suspend_state_t state
);
193 #else /* !CONFIG_SUSPEND */
194 #define mem_sleep_current PM_SUSPEND_ON
196 static inline int suspend_devices_and_enter(suspend_state_t state
)
200 #endif /* !CONFIG_SUSPEND */
202 #ifdef CONFIG_PM_TEST_SUSPEND
203 /* kernel/power/suspend_test.c */
204 extern void suspend_test_start(void);
205 extern void suspend_test_finish(const char *label
);
206 #else /* !CONFIG_PM_TEST_SUSPEND */
207 static inline void suspend_test_start(void) {}
208 static inline void suspend_test_finish(const char *label
) {}
209 #endif /* !CONFIG_PM_TEST_SUSPEND */
211 #ifdef CONFIG_PM_SLEEP
212 /* kernel/power/main.c */
213 extern int __pm_notifier_call_chain(unsigned long val
, int nr_to_call
,
215 extern int pm_notifier_call_chain(unsigned long val
);
218 #ifdef CONFIG_HIGHMEM
219 int restore_highmem(void);
221 static inline unsigned int count_highmem_pages(void) { return 0; }
222 static inline int restore_highmem(void) { return 0; }
226 * Suspend test levels
240 #define TEST_FIRST TEST_NONE
241 #define TEST_MAX (__TEST_AFTER_LAST - 1)
243 #ifdef CONFIG_PM_SLEEP_DEBUG
244 extern int pm_test_level
;
246 #define pm_test_level (TEST_NONE)
249 #ifdef CONFIG_SUSPEND_FREEZER
250 static inline int suspend_freeze_processes(void)
254 error
= freeze_processes();
256 * freeze_processes() automatically thaws every task if freezing
257 * fails. So we need not do anything extra upon error.
262 error
= freeze_kernel_threads();
264 * freeze_kernel_threads() thaws only kernel threads upon freezing
265 * failure. So we have to thaw the userspace tasks ourselves.
273 static inline void suspend_thaw_processes(void)
278 static inline int suspend_freeze_processes(void)
283 static inline void suspend_thaw_processes(void)
288 #ifdef CONFIG_PM_AUTOSLEEP
290 /* kernel/power/autosleep.c */
291 extern int pm_autosleep_init(void);
292 extern int pm_autosleep_lock(void);
293 extern void pm_autosleep_unlock(void);
294 extern suspend_state_t
pm_autosleep_state(void);
295 extern int pm_autosleep_set_state(suspend_state_t state
);
297 #else /* !CONFIG_PM_AUTOSLEEP */
299 static inline int pm_autosleep_init(void) { return 0; }
300 static inline int pm_autosleep_lock(void) { return 0; }
301 static inline void pm_autosleep_unlock(void) {}
302 static inline suspend_state_t
pm_autosleep_state(void) { return PM_SUSPEND_ON
; }
304 #endif /* !CONFIG_PM_AUTOSLEEP */
306 #ifdef CONFIG_PM_WAKELOCKS
308 /* kernel/power/wakelock.c */
309 extern ssize_t
pm_show_wakelocks(char *buf
, bool show_active
);
310 extern int pm_wake_lock(const char *buf
);
311 extern int pm_wake_unlock(const char *buf
);
313 #endif /* !CONFIG_PM_WAKELOCKS */