?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
x86/amd-iommu: Support higher level PTEs in iommu_page_unmap
[linux/fpc-iii.git] / sound / oss / aedsp16.c
blob35b5912cf3f81fa36d181fdb44f1f35be5d92d79
1 /*
2 sound/oss/aedsp16.c
3
4 Audio Excel DSP 16 software configuration routines
5 Copyright (C) 1995,1996,1997,1998 Riccardo Facchetti (fizban@tin.it)
6
7 This program is free software; you can redistribute it and/or modify
8 it under the terms of the GNU General Public License as published by
9 the Free Software Foundation; either version 2 of the License, or
10 (at your option) any later version.
11
12 This program is distributed in the hope that it will be useful,
13 but WITHOUT ANY WARRANTY; without even the implied warranty of
14 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 GNU General Public License for more details.
16
17 You should have received a copy of the GNU General Public License
18 along with this program; if not, write to the Free Software
19 Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
20
21 */
22 /*
23 * Include the main OSS Lite header file. It include all the os, OSS Lite, etc
24 * headers needed by this source.
25 */
26 #include <linux/delay.h>
27 #include <linux/module.h>
28 #include <linux/init.h>
29 #include "sound_config.h"
30
31 /*
32
33 READ THIS
34
35 This module started to configure the Audio Excel DSP 16 Sound Card.
36 Now works with the SC-6000 (old aedsp16) and new SC-6600 based cards.
37
38 NOTE: I have NO idea about Audio Excel DSP 16 III. If someone owns this
39 audio card and want to see the kernel support for it, please contact me.
40
41 Audio Excel DSP 16 is an SB pro II, Microsoft Sound System and MPU-401
42 compatible card.
43 It is software-only configurable (no jumpers to hard-set irq/dma/mpu-irq),
44 so before this module, the only way to configure the DSP under linux was
45 boot the MS-DOS loading the sound.sys device driver (this driver soft-
46 configure the sound board hardware by massaging someone of its registers),
47 and then ctrl-alt-del to boot linux with the DSP configured by the DOS
48 driver.
49
50 This module works configuring your Audio Excel DSP 16's irq, dma and
51 mpu-401-irq. The OSS Lite routines rely on the fact that if the
52 hardware is there, they can detect it. The problem with AEDSP16 is
53 that no hardware can be found by the probe routines if the sound card
54 is not configured properly. Sometimes the kernel probe routines can find
55 an SBPRO even when the card is not configured (this is the standard setup
56 of the card), but the SBPRO emulation don't work well if the card is not
57 properly initialized. For this reason
58
59 aedsp16_init_board()
60
61 routine is called before the OSS Lite probe routines try to detect the
62 hardware.
63
64 NOTE (READ THE NOTE TOO, IT CONTAIN USEFUL INFORMATIONS)
65
66 NOTE: Now it works with SC-6000 and SC-6600 based audio cards. The new cards
67 have no jumper switch at all. No more WSS or MPU-401 I/O port switches. They
68 have to be configured by software.
69
70 NOTE: The driver is merged with the new OSS Lite sound driver. It works
71 as a lowlevel driver.
72
73 The Audio Excel DSP 16 Sound Card emulates both SBPRO and MSS;
74 the OSS Lite sound driver can be configured for SBPRO and MSS cards
75 at the same time, but the aedsp16 can't be two cards!!
76 When we configure it, we have to choose the SBPRO or the MSS emulation
77 for AEDSP16. We also can install a *REAL* card of the other type (see [1]).
78
79 NOTE: If someone can test the combination AEDSP16+MSS or AEDSP16+SBPRO
80 please let me know if it works.
81
82 The MPU-401 support can be compiled in together with one of the other
83 two operating modes.
84
85 NOTE: This is something like plug-and-play: we have only to plug
86 the AEDSP16 board in the socket, and then configure and compile
87 a kernel that uses the AEDSP16 software configuration capability.
88 No jumper setting is needed!
89
90 For example, if you want AEDSP16 to be an SBPro, on irq 10, dma 3
91 you have just to make config the OSS Lite package, configuring
92 the AEDSP16 sound card, then activating the SBPro emulation mode
93 and at last configuring IRQ and DMA.
94 Compile the kernel and run it.
95
96 NOTE: This means for SC-6000 cards that you can choose irq and dma,
97 but not the I/O addresses. To change I/O addresses you have to set
98 them with jumpers. For SC-6600 cards you have no jumpers so you have
99 to set up your full card configuration in the make config.
100
101 You can change the irq/dma/mirq settings WITHOUT THE NEED to open
102 your computer and massage the jumpers (there are no irq/dma/mirq
103 jumpers to be configured anyway, only I/O BASE values have to be
104 configured with jumpers)
105
106 For some ununderstandable reason, the card default of irq 7, dma 1,
107 don't work for me. Seems to be an IRQ or DMA conflict. Under heavy
108 HDD work, the kernel start to erupt out a lot of messages like:
109
110 'Sound: DMA timed out - IRQ/DRQ config error?'
111
112 For what I can say, I have NOT any conflict at irq 7 (under linux I'm
113 using the lp polling driver), and dma line 1 is unused as stated by
114 /proc/dma. I can suppose this is a bug of AEDSP16. I know my hardware so
115 I'm pretty sure I have not any conflict, but may be I'm wrong. Who knows!
116 Anyway a setting of irq 10, dma 3 works really fine.
117
118 NOTE: if someone can use AEDSP16 with irq 7, dma 1, please let me know
119 the emulation mode, all the installed hardware and the hardware
120 configuration (irq and dma settings of all the hardware).
121
122 This init module should work with SBPRO+MSS, when one of the two is
123 the AEDSP16 emulation and the other the real card. (see [1])
124 For example:
125
126 AEDSP16 (0x220) in SBPRO emu (0x220) + real MSS + other
127 AEDSP16 (0x220) in MSS emu + real SBPRO (0x240) + other
128
129 MPU401 should work. (see [2])
130
131 [1]
132 ---
133 Date: Mon, 29 Jul 1997 08:35:40 +0100
134 From: Mr S J Greenaway <sjg95@unixfe.rl.ac.uk>
135
136 [...]
137 Just to let you know got my Audio Excel (emulating a MSS) working
138 with my original SB16, thanks for the driver!
139 [...]
140 ---
141
142 [2] Not tested by me for lack of hardware.
143
144 TODO, WISHES AND TECH
145
146 - About I/O ports allocation -
147
148 Request the 2x0h region (port base) in any case if we are using this card.
149
150 NOTE: the "aedsp16 (base)" string with which we are requesting the aedsp16
151 port base region (see code) does not mean necessarily that we are emulating
152 sbpro. Even if this region is the sbpro I/O ports region, we use this
153 region to access the control registers of the card, and if emulating
154 sbpro, I/O sbpro registers too. If we are emulating MSS, the sbpro
155 registers are not used, in no way, to emulate an sbpro: they are
156 used only for configuration purposes.
157
158 Started Fri Mar 17 16:13:18 MET 1995
159
160 v0.1 (ALPHA, was a user-level program called AudioExcelDSP16.c)
161 - Initial code.
162 v0.2 (ALPHA)
163 - Cleanups.
164 - Integrated with Linux voxware v 2.90-2 kernel sound driver.
165 - SoundBlaster Pro mode configuration.
166 - Microsoft Sound System mode configuration.
167 - MPU-401 mode configuration.
168 v0.3 (ALPHA)
169 - Cleanups.
170 - Rearranged the code to let aedsp16_init_board be more general.
171 - Erased the REALLY_SLOW_IO. We don't need it. Erased the linux/io.h
172 inclusion too. We rely on os.h
173 - Used the to get a variable
174 len string (we are not sure about the len of Copyright string).
175 This works with any SB and compatible.
176 - Added the code to request_region at device init (should go in
177 the main body of voxware).
178 v0.4 (BETA)
179 - Better configure.c patch for aedsp16 configuration (better
180 logic of inclusion of AEDSP16 support)
181 - Modified the conditional compilation to better support more than
182 one sound card of the emulated type (read the NOTES above)
183 - Moved the sb init routine from the attach to the very first
184 probe in sb_card.c
185 - Rearrangements and cleanups
186 - Wiped out some unnecessary code and variables: this is kernel
187 code so it is better save some TEXT and DATA
188 - Fixed the request_region code. We must allocate the aedsp16 (sbpro)
189 I/O ports in any case because they are used to access the DSP
190 configuration registers and we can not allow anyone to get them.
191 v0.5
192 - cleanups on comments
193 - prep for diffs against v3.0-proto-950402
194 v0.6
195 - removed the request_region()s when compiling the MODULE sound.o
196 because we are not allowed (by the actual voxware structure) to
197 release_region()
198 v0.7 (pre ALPHA, not distributed)
199 - started porting this module to kernel 1.3.84. Dummy probe/attach
200 routines.
201 v0.8 (ALPHA)
202 - attached all the init routines.
203 v0.9 (BETA)
204 - Integrated with linux-pre2.0.7
205 - Integrated with configuration scripts.
206 - Cleaned up and beautyfied the code.
207 v0.9.9 (BETA)
208 - Thanks to Piercarlo Grandi: corrected the conditonal compilation code.
209 Now only the code configured is compiled in, with some memory saving.
210 v0.9.10
211 - Integration into the sound/lowlevel/ section of the sound driver.
212 - Re-organized the code.
213 v0.9.11 (not distributed)
214 - Rewritten the init interface-routines to initialize the AEDSP16 in
215 one shot.
216 - More cosmetics.
217 - SC-6600 support.
218 - More soft/hard configuration.
219 v0.9.12
220 - Refined the v0.9.11 code with conditional compilation to distinguish
221 between SC-6000 and SC-6600 code.
222 v1.0.0
223 - Prep for merging with OSS Lite and Linux kernel 2.1.13
224 - Corrected a bug in request/check/release region calls (thanks to the
225 new kernel exception handling).
226 v1.1
227 - Revamped for integration with new modularized sound drivers: to enhance
228 the flexibility of modular version, I have removed all the conditional
229 compilation for SBPRO, MPU and MSS code. Now it is all managed with
230 the ae_config structure.
231 v1.2
232 - Module informations added.
233 - Removed aedsp16_delay_10msec(), now using mdelay(10)
234 - All data and funcs moved to .*.init section.
235 v1.3
236 Arnaldo Carvalho de Melo <acme@conectiva.com.br> - 2000/09/27
237 - got rid of check_region
238
239 Known Problems:
240 - Audio Excel DSP 16 III don't work with this driver.
241
242 Credits:
243 Many thanks to Gerald Britton <gbritton@CapAccess.org>. He helped me a
244 lot in testing the 0.9.11 and 0.9.12 versions of this driver.
245
246 */
247
248
249 #define VERSION "1.3" /* Version of Audio Excel DSP 16 driver */
250
251 #undef AEDSP16_DEBUG /* Define this to 1 to enable debug code */
252 #undef AEDSP16_DEBUG_MORE /* Define this to 1 to enable more debug */
253 #undef AEDSP16_INFO /* Define this to 1 to enable info code */
254
255 #if defined(AEDSP16_DEBUG)
256 # define DBG(x) printk x
257 # if defined(AEDSP16_DEBUG_MORE)
258 # define DBG1(x) printk x
259 # else
260 # define DBG1(x)
261 # endif
262 #else
263 # define DBG(x)
264 # define DBG1(x)
265 #endif
266
267 /*
268 * Misc definitions
269 */
270 #define TRUE 1
271 #define FALSE 0
272
273 /*
274 * Region Size for request/check/release region.
275 */
276 #define IOBASE_REGION_SIZE 0x10
277
278 /*
279 * Hardware related defaults
280 */
281 #define DEF_AEDSP16_IOB 0x220 /* 0x220(default) 0x240 */
282 #define DEF_AEDSP16_IRQ 7 /* 5 7(default) 9 10 11 */
283 #define DEF_AEDSP16_MRQ 0 /* 5 7 9 10 0(default), 0 means disable */
284 #define DEF_AEDSP16_DMA 1 /* 0 1(default) 3 */
285
286 /*
287 * Commands of AEDSP16's DSP (SBPRO+special).
288 * Some of them are COMMAND_xx, in the future they may change.
289 */
290 #define WRITE_MDIRQ_CFG 0x50 /* Set M&I&DRQ mask (the real config) */
291 #define COMMAND_52 0x52 /* */
292 #define READ_HARD_CFG 0x58 /* Read Hardware Config (I/O base etc) */
293 #define COMMAND_5C 0x5c /* */
294 #define COMMAND_60 0x60 /* */
295 #define COMMAND_66 0x66 /* */
296 #define COMMAND_6C 0x6c /* */
297 #define COMMAND_6E 0x6e /* */
298 #define COMMAND_88 0x88 /* */
299 #define DSP_INIT_MSS 0x8c /* Enable Microsoft Sound System mode */
300 #define COMMAND_C5 0xc5 /* */
301 #define GET_DSP_VERSION 0xe1 /* Get DSP Version */
302 #define GET_DSP_COPYRIGHT 0xe3 /* Get DSP Copyright */
303
304 /*
305 * Offsets of AEDSP16 DSP I/O ports. The offset is added to base I/O port
306 * to have the actual I/O port.
307 * Register permissions are:
308 * (wo) == Write Only
309 * (ro) == Read Only
310 * (w-) == Write
311 * (r-) == Read
312 */
313 #define DSP_RESET 0x06 /* offset of DSP RESET (wo) */
314 #define DSP_READ 0x0a /* offset of DSP READ (ro) */
315 #define DSP_WRITE 0x0c /* offset of DSP WRITE (w-) */
316 #define DSP_COMMAND 0x0c /* offset of DSP COMMAND (w-) */
317 #define DSP_STATUS 0x0c /* offset of DSP STATUS (r-) */
318 #define DSP_DATAVAIL 0x0e /* offset of DSP DATA AVAILABLE (ro) */
319
320
321 #define RETRY 10 /* Various retry values on I/O opera- */
322 #define STATUSRETRY 1000 /* tions. Sometimes we have to */
323 #define HARDRETRY 500000 /* wait for previous cmd to complete */
324
325 /*
326 * Size of character arrays that store name and version of sound card
327 */
328 #define CARDNAMELEN 15 /* Size of the card's name in chars */
329 #define CARDVERLEN 10 /* Size of the card's version in chars */
330 #define CARDVERDIGITS 2 /* Number of digits in the version */
331
332 #if defined(CONFIG_SC6600)
333 /*
334 * Bitmapped flags of hard configuration
335 */
336 /*
337 * Decode macros (xl == low byte, xh = high byte)
338 */
339 #define IOBASE(xl) ((xl & 0x01)?0x240:0x220)
340 #define JOY(xl) (xl & 0x02)
341 #define MPUADDR(xl) ( \
342 (xl & 0x0C)?0x330: \
343 (xl & 0x08)?0x320: \
344 (xl & 0x04)?0x310: \
345 0x300)
346 #define WSSADDR(xl) ((xl & 0x10)?0xE80:0x530)
347 #define CDROM(xh) (xh & 0x20)
348 #define CDROMADDR(xh) (((xh & 0x1F) << 4) + 0x200)
349 /*
350 * Encode macros
351 */
352 #define BLDIOBASE(xl, val) { \
353 xl &= ~0x01; \
354 if (val == 0x240) \
355 xl |= 0x01; \
356 }
357 #define BLDJOY(xl, val) { \
358 xl &= ~0x02; \
359 if (val == 1) \
360 xl |= 0x02; \
361 }
362 #define BLDMPUADDR(xl, val) { \
363 xl &= ~0x0C; \
364 switch (val) { \
365 case 0x330: \
366 xl |= 0x0C; \
367 break; \
368 case 0x320: \
369 xl |= 0x08; \
370 break; \
371 case 0x310: \
372 xl |= 0x04; \
373 break; \
374 case 0x300: \
375 xl |= 0x00; \
376 break; \
377 default: \
378 xl |= 0x00; \
379 break; \
380 } \
381 }
382 #define BLDWSSADDR(xl, val) { \
383 xl &= ~0x10; \
384 if (val == 0xE80) \
385 xl |= 0x10; \
386 }
387 #define BLDCDROM(xh, val) { \
388 xh &= ~0x20; \
389 if (val == 1) \
390 xh |= 0x20; \
391 }
392 #define BLDCDROMADDR(xh, val) { \
393 int tmp = val; \
394 tmp -= 0x200; \
395 tmp >>= 4; \
396 tmp &= 0x1F; \
397 xh |= tmp; \
398 xh &= 0x7F; \
399 xh |= 0x40; \
400 }
401 #endif /* CONFIG_SC6600 */
402
403 /*
404 * Bit mapped flags for calling aedsp16_init_board(), and saving the current
405 * emulation mode.
406 */
407 #define INIT_NONE (0 )
408 #define INIT_SBPRO (1<<0)
409 #define INIT_MSS (1<<1)
410 #define INIT_MPU401 (1<<2)
411
412 static int soft_cfg __initdata = 0; /* bitmapped config */
413 static int soft_cfg_mss __initdata = 0; /* bitmapped mss config */
414 static int ver[CARDVERDIGITS] __initdata = {0, 0}; /* DSP Ver:
415 hi->ver[0] lo->ver[1] */
416
417 #if defined(CONFIG_SC6600)
418 static int hard_cfg[2] /* lo<-hard_cfg[0] hi<-hard_cfg[1] */
419 __initdata = { 0, 0};
420 #endif /* CONFIG_SC6600 */
421
422 #if defined(CONFIG_SC6600)
423 /* Decoded hard configuration */
424 struct d_hcfg {
425 int iobase;
426 int joystick;
427 int mpubase;
428 int wssbase;
429 int cdrom;
430 int cdrombase;
431 };
432
433 static struct d_hcfg decoded_hcfg __initdata = {0, };
434
435 #endif /* CONFIG_SC6600 */
436
437 /* orVals contain the values to be or'ed */
438 struct orVals {
439 int val; /* irq|mirq|dma */
440 int or; /* soft_cfg |= TheStruct.or */
441 };
442
443 /* aedsp16_info contain the audio card configuration */
444 struct aedsp16_info {
445 int base_io; /* base I/O address for accessing card */
446 int irq; /* irq value for DSP I/O */
447 int mpu_irq; /* irq for mpu401 interface I/O */
448 int dma; /* dma value for DSP I/O */
449 int mss_base; /* base I/O for Microsoft Sound System */
450 int mpu_base; /* base I/O for MPU-401 emulation */
451 int init; /* Initialization status of the card */
452 };
453
454 /*
455 * Magic values that the DSP will eat when configuring irq/mirq/dma
456 */
457 /* DSP IRQ conversion array */
458 static struct orVals orIRQ[] __initdata = {
459 {0x05, 0x28},
460 {0x07, 0x08},
461 {0x09, 0x10},
462 {0x0a, 0x18},
463 {0x0b, 0x20},
464 {0x00, 0x00}
465 };
466
467 /* MPU-401 IRQ conversion array */
468 static struct orVals orMIRQ[] __initdata = {
469 {0x05, 0x04},
470 {0x07, 0x44},
471 {0x09, 0x84},
472 {0x0a, 0xc4},
473 {0x00, 0x00}
474 };
475
476 /* DMA Channels conversion array */
477 static struct orVals orDMA[] __initdata = {
478 {0x00, 0x01},
479 {0x01, 0x02},
480 {0x03, 0x03},
481 {0x00, 0x00}
482 };
483
484 static struct aedsp16_info ae_config = {
485 DEF_AEDSP16_IOB,
486 DEF_AEDSP16_IRQ,
487 DEF_AEDSP16_MRQ,
488 DEF_AEDSP16_DMA,
489 -1,
490 -1,
491 INIT_NONE
492 };
493
494 /*
495 * Buffers to store audio card informations
496 */
497 static char DSPCopyright[CARDNAMELEN + 1] __initdata = {0, };
498 static char DSPVersion[CARDVERLEN + 1] __initdata = {0, };
499
500 static int __init aedsp16_wait_data(int port)
501 {
502 int loop = STATUSRETRY;
503 unsigned char ret = 0;
504
505 DBG1(("aedsp16_wait_data (0x%x): ", port));
506
507 do {
508 ret = inb(port + DSP_DATAVAIL);
509 /*
510 * Wait for data available (bit 7 of ret == 1)
511 */
512 } while (!(ret & 0x80) && loop--);
513
514 if (ret & 0x80) {
515 DBG1(("success.\n"));
516 return TRUE;
517 }
518
519 DBG1(("failure.\n"));
520 return FALSE;
521 }
522
523 static int __init aedsp16_read(int port)
524 {
525 int inbyte;
526
527 DBG((" Read DSP Byte (0x%x): ", port));
528
529 if (aedsp16_wait_data(port) == FALSE) {
530 DBG(("failure.\n"));
531 return -1;
532 }
533
534 inbyte = inb(port + DSP_READ);
535
536 DBG(("read [0x%x]/{%c}.\n", inbyte, inbyte));
537
538 return inbyte;
539 }
540
541 static int __init aedsp16_test_dsp(int port)
542 {
543 return ((aedsp16_read(port) == 0xaa) ? TRUE : FALSE);
544 }
545
546 static int __init aedsp16_dsp_reset(int port)
547 {
548 /*
549 * Reset DSP
550 */
551
552 DBG(("Reset DSP:\n"));
553
554 outb(1, (port + DSP_RESET));
555 udelay(10);
556 outb(0, (port + DSP_RESET));
557 udelay(10);
558 udelay(10);
559 if (aedsp16_test_dsp(port) == TRUE) {
560 DBG(("success.\n"));
561 return TRUE;
562 } else
563 DBG(("failure.\n"));
564 return FALSE;
565 }
566
567 static int __init aedsp16_write(int port, int cmd)
568 {
569 unsigned char ret;
570 int loop = HARDRETRY;
571
572 DBG((" Write DSP Byte (0x%x) [0x%x]: ", port, cmd));
573
574 do {
575 ret = inb(port + DSP_STATUS);
576 /*
577 * DSP ready to receive data if bit 7 of ret == 0
578 */
579 if (!(ret & 0x80)) {
580 outb(cmd, port + DSP_COMMAND);
581 DBG(("success.\n"));
582 return 0;
583 }
584 } while (loop--);
585
586 DBG(("timeout.\n"));
587 printk("[AEDSP16] DSP Command (0x%x) timeout.\n", cmd);
588
589 return -1;
590 }
591
592 #if defined(CONFIG_SC6600)
593
594 #if defined(AEDSP16_INFO) || defined(AEDSP16_DEBUG)
595 void __init aedsp16_pinfo(void) {
596 DBG(("\n Base address: %x\n", decoded_hcfg.iobase));
597 DBG((" Joystick : %s present\n", decoded_hcfg.joystick?"":" not"));
598 DBG((" WSS addr : %x\n", decoded_hcfg.wssbase));
599 DBG((" MPU-401 addr: %x\n", decoded_hcfg.mpubase));
600 DBG((" CDROM : %s present\n", (decoded_hcfg.cdrom!=4)?"":" not"));
601 DBG((" CDROMADDR : %x\n\n", decoded_hcfg.cdrombase));
602 }
603 #endif
604
605 static void __init aedsp16_hard_decode(void) {
606
607 DBG((" aedsp16_hard_decode: 0x%x, 0x%x\n", hard_cfg[0], hard_cfg[1]));
608
609 /*
610 * Decode Cfg Bytes.
611 */
612 decoded_hcfg.iobase = IOBASE(hard_cfg[0]);
613 decoded_hcfg.joystick = JOY(hard_cfg[0]);
614 decoded_hcfg.wssbase = WSSADDR(hard_cfg[0]);
615 decoded_hcfg.mpubase = MPUADDR(hard_cfg[0]);
616 decoded_hcfg.cdrom = CDROM(hard_cfg[1]);
617 decoded_hcfg.cdrombase = CDROMADDR(hard_cfg[1]);
618
619 #if defined(AEDSP16_INFO) || defined(AEDSP16_DEBUG)
620 printk(" Original sound card configuration:\n");
621 aedsp16_pinfo();
622 #endif
623
624 /*
625 * Now set up the real kernel configuration.
626 */
627 decoded_hcfg.iobase = ae_config.base_io;
628 decoded_hcfg.wssbase = ae_config.mss_base;
629 decoded_hcfg.mpubase = ae_config.mpu_base;
630
631 #if defined(CONFIG_SC6600_JOY)
632 decoded_hcfg.joystick = CONFIG_SC6600_JOY; /* Enable */
633 #endif
634 #if defined(CONFIG_SC6600_CDROM)
635 decoded_hcfg.cdrom = CONFIG_SC6600_CDROM; /* 4:N-3:I-2:G-1:P-0:S */
636 #endif
637 #if defined(CONFIG_SC6600_CDROMBASE)
638 decoded_hcfg.cdrombase = CONFIG_SC6600_CDROMBASE; /* 0 Disable */
639 #endif
640
641 #if defined(AEDSP16_DEBUG)
642 DBG((" New Values:\n"));
643 aedsp16_pinfo();
644 #endif
645
646 DBG(("success.\n"));
647 }
648
649 static void __init aedsp16_hard_encode(void) {
650
651 DBG((" aedsp16_hard_encode: 0x%x, 0x%x\n", hard_cfg[0], hard_cfg[1]));
652
653 hard_cfg[0] = 0;
654 hard_cfg[1] = 0;
655
656 hard_cfg[0] |= 0x20;
657
658 BLDIOBASE (hard_cfg[0], decoded_hcfg.iobase);
659 BLDWSSADDR(hard_cfg[0], decoded_hcfg.wssbase);
660 BLDMPUADDR(hard_cfg[0], decoded_hcfg.mpubase);
661 BLDJOY(hard_cfg[0], decoded_hcfg.joystick);
662 BLDCDROM(hard_cfg[1], decoded_hcfg.cdrom);
663 BLDCDROMADDR(hard_cfg[1], decoded_hcfg.cdrombase);
664
665 #if defined(AEDSP16_DEBUG)
666 aedsp16_pinfo();
667 #endif
668
669 DBG((" aedsp16_hard_encode: 0x%x, 0x%x\n", hard_cfg[0], hard_cfg[1]));
670 DBG(("success.\n"));
671
672 }
673
674 static int __init aedsp16_hard_write(int port) {
675
676 DBG(("aedsp16_hard_write:\n"));
677
678 if (aedsp16_write(port, COMMAND_6C)) {
679 printk("[AEDSP16] CMD 0x%x: failed!\n", COMMAND_6C);
680 DBG(("failure.\n"));
681 return FALSE;
682 }
683 if (aedsp16_write(port, COMMAND_5C)) {
684 printk("[AEDSP16] CMD 0x%x: failed!\n", COMMAND_5C);
685 DBG(("failure.\n"));
686 return FALSE;
687 }
688 if (aedsp16_write(port, hard_cfg[0])) {
689 printk("[AEDSP16] DATA 0x%x: failed!\n", hard_cfg[0]);
690 DBG(("failure.\n"));
691 return FALSE;
692 }
693 if (aedsp16_write(port, hard_cfg[1])) {
694 printk("[AEDSP16] DATA 0x%x: failed!\n", hard_cfg[1]);
695 DBG(("failure.\n"));
696 return FALSE;
697 }
698 if (aedsp16_write(port, COMMAND_C5)) {
699 printk("[AEDSP16] CMD 0x%x: failed!\n", COMMAND_C5);
700 DBG(("failure.\n"));
701 return FALSE;
702 }
703
704 DBG(("success.\n"));
705
706 return TRUE;
707 }
708
709 static int __init aedsp16_hard_read(int port) {
710
711 DBG(("aedsp16_hard_read:\n"));
712
713 if (aedsp16_write(port, READ_HARD_CFG)) {
714 printk("[AEDSP16] CMD 0x%x: failed!\n", READ_HARD_CFG);
715 DBG(("failure.\n"));
716 return FALSE;
717 }
718
719 if ((hard_cfg[0] = aedsp16_read(port)) == -1) {
720 printk("[AEDSP16] aedsp16_read after CMD 0x%x: failed\n",
721 READ_HARD_CFG);
722 DBG(("failure.\n"));
723 return FALSE;
724 }
725 if ((hard_cfg[1] = aedsp16_read(port)) == -1) {
726 printk("[AEDSP16] aedsp16_read after CMD 0x%x: failed\n",
727 READ_HARD_CFG);
728 DBG(("failure.\n"));
729 return FALSE;
730 }
731 if (aedsp16_read(port) == -1) {
732 printk("[AEDSP16] aedsp16_read after CMD 0x%x: failed\n",
733 READ_HARD_CFG);
734 DBG(("failure.\n"));
735 return FALSE;
736 }
737
738 DBG(("success.\n"));
739
740 return TRUE;
741 }
742
743 static int __init aedsp16_ext_cfg_write(int port) {
744
745 int extcfg, val;
746
747 if (aedsp16_write(port, COMMAND_66)) {
748 printk("[AEDSP16] CMD 0x%x: failed!\n", COMMAND_66);
749 return FALSE;
750 }
751
752 extcfg = 7;
753 if (decoded_hcfg.cdrom != 2)
754 extcfg = 0x0F;
755 if ((decoded_hcfg.cdrom == 4) ||
756 (decoded_hcfg.cdrom == 3))
757 extcfg &= ~2;
758 if (decoded_hcfg.cdrombase == 0)
759 extcfg &= ~2;
760 if (decoded_hcfg.mpubase == 0)
761 extcfg &= ~1;
762
763 if (aedsp16_write(port, extcfg)) {
764 printk("[AEDSP16] Write extcfg: failed!\n");
765 return FALSE;
766 }
767 if (aedsp16_write(port, 0)) {
768 printk("[AEDSP16] Write extcfg: failed!\n");
769 return FALSE;
770 }
771 if (decoded_hcfg.cdrom == 3) {
772 if (aedsp16_write(port, COMMAND_52)) {
773 printk("[AEDSP16] CMD 0x%x: failed!\n", COMMAND_52);
774 return FALSE;
775 }
776 if ((val = aedsp16_read(port)) == -1) {
777 printk("[AEDSP16] aedsp16_read after CMD 0x%x: failed\n"
778 , COMMAND_52);
779 return FALSE;
780 }
781 val &= 0x7F;
782 if (aedsp16_write(port, COMMAND_60)) {
783 printk("[AEDSP16] CMD 0x%x: failed!\n", COMMAND_60);
784 return FALSE;
785 }
786 if (aedsp16_write(port, val)) {
787 printk("[AEDSP16] Write val: failed!\n");
788 return FALSE;
789 }
790 }
791
792 return TRUE;
793 }
794
795 #endif /* CONFIG_SC6600 */
796
797 static int __init aedsp16_cfg_write(int port) {
798 if (aedsp16_write(port, WRITE_MDIRQ_CFG)) {
799 printk("[AEDSP16] CMD 0x%x: failed!\n", WRITE_MDIRQ_CFG);
800 return FALSE;
801 }
802 if (aedsp16_write(port, soft_cfg)) {
803 printk("[AEDSP16] Initialization of (M)IRQ and DMA: failed!\n");
804 return FALSE;
805 }
806 return TRUE;
807 }
808
809 static int __init aedsp16_init_mss(int port)
810 {
811 DBG(("aedsp16_init_mss:\n"));
812
813 mdelay(10);
814
815 if (aedsp16_write(port, DSP_INIT_MSS)) {
816 printk("[AEDSP16] aedsp16_init_mss [0x%x]: failed!\n",
817 DSP_INIT_MSS);
818 DBG(("failure.\n"));
819 return FALSE;
820 }
821
822 mdelay(10);
823
824 if (aedsp16_cfg_write(port) == FALSE)
825 return FALSE;
826
827 outb(soft_cfg_mss, ae_config.mss_base);
828
829 DBG(("success.\n"));
830
831 return TRUE;
832 }
833
834 static int __init aedsp16_setup_board(int port) {
835 int loop = RETRY;
836
837 #if defined(CONFIG_SC6600)
838 int val = 0;
839
840 if (aedsp16_hard_read(port) == FALSE) {
841 printk("[AEDSP16] aedsp16_hard_read: failed!\n");
842 return FALSE;
843 }
844
845 if (aedsp16_write(port, COMMAND_52)) {
846 printk("[AEDSP16] CMD 0x%x: failed!\n", COMMAND_52);
847 return FALSE;
848 }
849
850 if ((val = aedsp16_read(port)) == -1) {
851 printk("[AEDSP16] aedsp16_read after CMD 0x%x: failed\n",
852 COMMAND_52);
853 return FALSE;
854 }
855 #endif
856
857 do {
858 if (aedsp16_write(port, COMMAND_88)) {
859 printk("[AEDSP16] CMD 0x%x: failed!\n", COMMAND_88);
860 return FALSE;
861 }
862 mdelay(10);
863 } while ((aedsp16_wait_data(port) == FALSE) && loop--);
864
865 if (aedsp16_read(port) == -1) {
866 printk("[AEDSP16] aedsp16_read after CMD 0x%x: failed\n",
867 COMMAND_88);
868 return FALSE;
869 }
870
871 #if !defined(CONFIG_SC6600)
872 if (aedsp16_write(port, COMMAND_5C)) {
873 printk("[AEDSP16] CMD 0x%x: failed!\n", COMMAND_5C);
874 return FALSE;
875 }
876 #endif
877
878 if (aedsp16_cfg_write(port) == FALSE)
879 return FALSE;
880
881 #if defined(CONFIG_SC6600)
882 if (aedsp16_write(port, COMMAND_60)) {
883 printk("[AEDSP16] CMD 0x%x: failed!\n", COMMAND_60);
884 return FALSE;
885 }
886 if (aedsp16_write(port, val)) {
887 printk("[AEDSP16] DATA 0x%x: failed!\n", val);
888 return FALSE;
889 }
890 if (aedsp16_write(port, COMMAND_6E)) {
891 printk("[AEDSP16] CMD 0x%x: failed!\n", COMMAND_6E);
892 return FALSE;
893 }
894 if (aedsp16_write(port, ver[0])) {
895 printk("[AEDSP16] DATA 0x%x: failed!\n", ver[0]);
896 return FALSE;
897 }
898 if (aedsp16_write(port, ver[1])) {
899 printk("[AEDSP16] DATA 0x%x: failed!\n", ver[1]);
900 return FALSE;
901 }
902
903 if (aedsp16_hard_write(port) == FALSE) {
904 printk("[AEDSP16] aedsp16_hard_write: failed!\n");
905 return FALSE;
906 }
907
908 if (aedsp16_write(port, COMMAND_5C)) {
909 printk("[AEDSP16] CMD 0x%x: failed!\n", COMMAND_5C);
910 return FALSE;
911 }
912
913 #if defined(THIS_IS_A_THING_I_HAVE_NOT_TESTED_YET)
914 if (aedsp16_cfg_write(port) == FALSE)
915 return FALSE;
916 #endif
917
918 #endif
919
920 return TRUE;
921 }
922
923 static int __init aedsp16_stdcfg(int port) {
924 if (aedsp16_write(port, WRITE_MDIRQ_CFG)) {
925 printk("[AEDSP16] CMD 0x%x: failed!\n", WRITE_MDIRQ_CFG);
926 return FALSE;
927 }
928 /*
929 * 0x0A == (IRQ 7, DMA 1, MIRQ 0)
930 */
931 if (aedsp16_write(port, 0x0A)) {
932 printk("[AEDSP16] aedsp16_stdcfg: failed!\n");
933 return FALSE;
934 }
935 return TRUE;
936 }
937
938 static int __init aedsp16_dsp_version(int port)
939 {
940 int len = 0;
941 int ret;
942
943 DBG(("Get DSP Version:\n"));
944
945 if (aedsp16_write(ae_config.base_io, GET_DSP_VERSION)) {
946 printk("[AEDSP16] CMD 0x%x: failed!\n", GET_DSP_VERSION);
947 DBG(("failed.\n"));
948 return FALSE;
949 }
950
951 do {
952 if ((ret = aedsp16_read(port)) == -1) {
953 DBG(("failed.\n"));
954 return FALSE;
955 }
956 /*
957 * We already know how many int are stored (2), so we know when the
958 * string is finished.
959 */
960 ver[len++] = ret;
961 } while (len < CARDVERDIGITS);
962 sprintf(DSPVersion, "%d.%d", ver[0], ver[1]);
963
964 DBG(("success.\n"));
965
966 return TRUE;
967 }
968
969 static int __init aedsp16_dsp_copyright(int port)
970 {
971 int len = 0;
972 int ret;
973
974 DBG(("Get DSP Copyright:\n"));
975
976 if (aedsp16_write(ae_config.base_io, GET_DSP_COPYRIGHT)) {
977 printk("[AEDSP16] CMD 0x%x: failed!\n", GET_DSP_COPYRIGHT);
978 DBG(("failed.\n"));
979 return FALSE;
980 }
981
982 do {
983 if ((ret = aedsp16_read(port)) == -1) {
984 /*
985 * If no more data available, return to the caller, no error if len>0.
986 * We have no other way to know when the string is finished.
987 */
988 if (len)
989 break;
990 else {
991 DBG(("failed.\n"));
992 return FALSE;
993 }
994 }
995
996 DSPCopyright[len++] = ret;
997
998 } while (len < CARDNAMELEN);
999
1000 DBG(("success.\n"));
1001
1002 return TRUE;
1003 }
1004
1005 static void __init aedsp16_init_tables(void)
1006 {
1007 int i = 0;
1008
1009 memset(DSPCopyright, 0, CARDNAMELEN + 1);
1010 memset(DSPVersion, 0, CARDVERLEN + 1);
1011
1012 for (i = 0; orIRQ[i].or; i++)
1013 if (orIRQ[i].val == ae_config.irq) {
1014 soft_cfg |= orIRQ[i].or;
1015 soft_cfg_mss |= orIRQ[i].or;
1016 }
1017
1018 for (i = 0; orMIRQ[i].or; i++)
1019 if (orMIRQ[i].or == ae_config.mpu_irq)
1020 soft_cfg |= orMIRQ[i].or;
1021
1022 for (i = 0; orDMA[i].or; i++)
1023 if (orDMA[i].val == ae_config.dma) {
1024 soft_cfg |= orDMA[i].or;
1025 soft_cfg_mss |= orDMA[i].or;
1026 }
1027 }
1028
1029 static int __init aedsp16_init_board(void)
1030 {
1031 aedsp16_init_tables();
1032
1033 if (aedsp16_dsp_reset(ae_config.base_io) == FALSE) {
1034 printk("[AEDSP16] aedsp16_dsp_reset: failed!\n");
1035 return FALSE;
1036 }
1037 if (aedsp16_dsp_copyright(ae_config.base_io) == FALSE) {
1038 printk("[AEDSP16] aedsp16_dsp_copyright: failed!\n");
1039 return FALSE;
1040 }
1041
1042 /*
1043 * My AEDSP16 card return SC-6000 in DSPCopyright, so
1044 * if we have something different, we have to be warned.
1045 */
1046 if (strcmp("SC-6000", DSPCopyright))
1047 printk("[AEDSP16] Warning: non SC-6000 audio card!\n");
1048
1049 if (aedsp16_dsp_version(ae_config.base_io) == FALSE) {
1050 printk("[AEDSP16] aedsp16_dsp_version: failed!\n");
1051 return FALSE;
1052 }
1053
1054 if (aedsp16_stdcfg(ae_config.base_io) == FALSE) {
1055 printk("[AEDSP16] aedsp16_stdcfg: failed!\n");
1056 return FALSE;
1057 }
1058
1059 #if defined(CONFIG_SC6600)
1060 if (aedsp16_hard_read(ae_config.base_io) == FALSE) {
1061 printk("[AEDSP16] aedsp16_hard_read: failed!\n");
1062 return FALSE;
1063 }
1064
1065 aedsp16_hard_decode();
1066
1067 aedsp16_hard_encode();
1068
1069 if (aedsp16_hard_write(ae_config.base_io) == FALSE) {
1070 printk("[AEDSP16] aedsp16_hard_write: failed!\n");
1071 return FALSE;
1072 }
1073
1074 if (aedsp16_ext_cfg_write(ae_config.base_io) == FALSE) {
1075 printk("[AEDSP16] aedsp16_ext_cfg_write: failed!\n");
1076 return FALSE;
1077 }
1078 #endif /* CONFIG_SC6600 */
1079
1080 if (aedsp16_setup_board(ae_config.base_io) == FALSE) {
1081 printk("[AEDSP16] aedsp16_setup_board: failed!\n");
1082 return FALSE;
1083 }
1084
1085 if (ae_config.mss_base != -1) {
1086 if (ae_config.init & INIT_MSS) {
1087 if (aedsp16_init_mss(ae_config.base_io) == FALSE) {
1088 printk("[AEDSP16] Can not initialize"
1089 "Microsoft Sound System mode.\n");
1090 return FALSE;
1091 }
1092 }
1093 }
1094
1095 #if !defined(MODULE) || defined(AEDSP16_INFO) || defined(AEDSP16_DEBUG)
1096
1097 printk("Audio Excel DSP 16 init v%s (%s %s) [",
1098 VERSION, DSPCopyright,
1099 DSPVersion);
1100
1101 if (ae_config.mpu_base != -1) {
1102 if (ae_config.init & INIT_MPU401) {
1103 printk("MPU401");
1104 if ((ae_config.init & INIT_MSS) ||
1105 (ae_config.init & INIT_SBPRO))
1106 printk(" ");
1107 }
1108 }
1109
1110 if (ae_config.mss_base == -1) {
1111 if (ae_config.init & INIT_SBPRO) {
1112 printk("SBPro");
1113 if (ae_config.init & INIT_MSS)
1114 printk(" ");
1115 }
1116 }
1117
1118 if (ae_config.mss_base != -1)
1119 if (ae_config.init & INIT_MSS)
1120 printk("MSS");
1121
1122 printk("]\n");
1123 #endif /* MODULE || AEDSP16_INFO || AEDSP16_DEBUG */
1124
1125 mdelay(10);
1126
1127 return TRUE;
1128 }
1129
1130 static int __init init_aedsp16_sb(void)
1131 {
1132 DBG(("init_aedsp16_sb: "));
1133
1134 /*
1135 * If the card is already init'ed MSS, we can not init it to SBPRO too
1136 * because the board can not emulate simultaneously MSS and SBPRO.
1137 */
1138 if (ae_config.init & INIT_MSS)
1139 return FALSE;
1140 if (ae_config.init & INIT_SBPRO)
1141 return FALSE;
1142
1143 ae_config.init |= INIT_SBPRO;
1144
1145 DBG(("done.\n"));
1146
1147 return TRUE;
1148 }
1149
1150 static void uninit_aedsp16_sb(void)
1151 {
1152 DBG(("uninit_aedsp16_sb: "));
1153
1154 ae_config.init &= ~INIT_SBPRO;
1155
1156 DBG(("done.\n"));
1157 }
1158
1159 static int __init init_aedsp16_mss(void)
1160 {
1161 DBG(("init_aedsp16_mss: "));
1162
1163 /*
1164 * If the card is already init'ed SBPRO, we can not init it to MSS too
1165 * because the board can not emulate simultaneously MSS and SBPRO.
1166 */
1167 if (ae_config.init & INIT_SBPRO)
1168 return FALSE;
1169 if (ae_config.init & INIT_MSS)
1170 return FALSE;
1171 /*
1172 * We must allocate the CONFIG_AEDSP16_BASE region too because these are the
1173 * I/O ports to access card's control registers.
1174 */
1175 if (!(ae_config.init & INIT_MPU401)) {
1176 if (!request_region(ae_config.base_io, IOBASE_REGION_SIZE,
1177 "aedsp16 (base)")) {
1178 printk(
1179 "AEDSP16 BASE I/O port region is already in use.\n");
1180 return FALSE;
1181 }
1182 }
1183
1184 ae_config.init |= INIT_MSS;
1185
1186 DBG(("done.\n"));
1187
1188 return TRUE;
1189 }
1190
1191 static void uninit_aedsp16_mss(void)
1192 {
1193 DBG(("uninit_aedsp16_mss: "));
1194
1195 if ((!(ae_config.init & INIT_MPU401)) &&
1196 (ae_config.init & INIT_MSS)) {
1197 release_region(ae_config.base_io, IOBASE_REGION_SIZE);
1198 DBG(("AEDSP16 base region released.\n"));
1199 }
1200
1201 ae_config.init &= ~INIT_MSS;
1202 DBG(("done.\n"));
1203 }
1204
1205 static int __init init_aedsp16_mpu(void)
1206 {
1207 DBG(("init_aedsp16_mpu: "));
1208
1209 if (ae_config.init & INIT_MPU401)
1210 return FALSE;
1211
1212 /*
1213 * We must request the CONFIG_AEDSP16_BASE region too because these are the I/O
1214 * ports to access card's control registers.
1215 */
1216 if (!(ae_config.init & (INIT_MSS | INIT_SBPRO))) {
1217 if (!request_region(ae_config.base_io, IOBASE_REGION_SIZE,
1218 "aedsp16 (base)")) {
1219 printk(
1220 "AEDSP16 BASE I/O port region is already in use.\n");
1221 return FALSE;
1222 }
1223 }
1224
1225 ae_config.init |= INIT_MPU401;
1226
1227 DBG(("done.\n"));
1228
1229 return TRUE;
1230 }
1231
1232 static void uninit_aedsp16_mpu(void)
1233 {
1234 DBG(("uninit_aedsp16_mpu: "));
1235
1236 if ((!(ae_config.init & (INIT_MSS | INIT_SBPRO))) &&
1237 (ae_config.init & INIT_MPU401)) {
1238 release_region(ae_config.base_io, IOBASE_REGION_SIZE);
1239 DBG(("AEDSP16 base region released.\n"));
1240 }
1241
1242 ae_config.init &= ~INIT_MPU401;
1243
1244 DBG(("done.\n"));
1245 }
1246
1247 static int __init init_aedsp16(void)
1248 {
1249 int initialized = FALSE;
1250
1251 DBG(("Initializing BASE[0x%x] IRQ[%d] DMA[%d] MIRQ[%d]\n",
1252 ae_config.base_io,ae_config.irq,ae_config.dma,ae_config.mpu_irq));
1253
1254 if (ae_config.mss_base == -1) {
1255 if (init_aedsp16_sb() == FALSE) {
1256 uninit_aedsp16_sb();
1257 } else {
1258 initialized = TRUE;
1259 }
1260 }
1261
1262 if (ae_config.mpu_base != -1) {
1263 if (init_aedsp16_mpu() == FALSE) {
1264 uninit_aedsp16_mpu();
1265 } else {
1266 initialized = TRUE;
1267 }
1268 }
1269
1270 /*
1271 * In the sequence of init routines, the MSS init MUST be the last!
1272 * This because of the special register programming the MSS mode needs.
1273 * A board reset would disable the MSS mode restoring the default SBPRO
1274 * mode.
1275 */
1276 if (ae_config.mss_base != -1) {
1277 if (init_aedsp16_mss() == FALSE) {
1278 uninit_aedsp16_mss();
1279 } else {
1280 initialized = TRUE;
1281 }
1282 }
1283
1284 if (initialized)
1285 initialized = aedsp16_init_board();
1286 return initialized;
1287 }
1288
1289 static void __exit uninit_aedsp16(void)
1290 {
1291 if (ae_config.mss_base != -1)
1292 uninit_aedsp16_mss();
1293 else
1294 uninit_aedsp16_sb();
1295 if (ae_config.mpu_base != -1)
1296 uninit_aedsp16_mpu();
1297 }
1298
1299 static int __initdata io = -1;
1300 static int __initdata irq = -1;
1301 static int __initdata dma = -1;
1302 static int __initdata mpu_irq = -1;
1303 static int __initdata mss_base = -1;
1304 static int __initdata mpu_base = -1;
1305
1306 module_param(io, int, 0);
1307 MODULE_PARM_DESC(io, "I/O base address (0x220 0x240)");
1308 module_param(irq, int, 0);
1309 MODULE_PARM_DESC(irq, "IRQ line (5 7 9 10 11)");
1310 module_param(dma, int, 0);
1311 MODULE_PARM_DESC(dma, "dma line (0 1 3)");
1312 module_param(mpu_irq, int, 0);
1313 MODULE_PARM_DESC(mpu_irq, "MPU-401 IRQ line (5 7 9 10 0)");
1314 module_param(mss_base, int, 0);
1315 MODULE_PARM_DESC(mss_base, "MSS emulation I/O base address (0x530 0xE80)");
1316 module_param(mpu_base, int, 0);
1317 MODULE_PARM_DESC(mpu_base,"MPU-401 I/O base address (0x300 0x310 0x320 0x330)");
1318 MODULE_AUTHOR("Riccardo Facchetti <fizban@tin.it>");
1319 MODULE_DESCRIPTION("Audio Excel DSP 16 Driver Version " VERSION);
1320 MODULE_LICENSE("GPL");
1321
1322 static int __init do_init_aedsp16(void) {
1323 printk("Audio Excel DSP 16 init driver Copyright (C) Riccardo Facchetti 1995-98\n");
1324 if (io == -1 || dma == -1 || irq == -1) {
1325 printk(KERN_INFO "aedsp16: I/O, IRQ and DMA are mandatory\n");
1326 return -EINVAL;
1327 }
1328
1329 ae_config.base_io = io;
1330 ae_config.irq = irq;
1331 ae_config.dma = dma;
1332
1333 ae_config.mss_base = mss_base;
1334 ae_config.mpu_base = mpu_base;
1335 ae_config.mpu_irq = mpu_irq;
1336
1337 if (init_aedsp16() == FALSE) {
1338 printk(KERN_ERR "aedsp16: initialization failed\n");
1339 /*
1340 * XXX
1341 * What error should we return here ?
1342 */
1343 return -EINVAL;
1344 }
1345 return 0;
1346 }
1347
1348 static void __exit cleanup_aedsp16(void) {
1349 uninit_aedsp16();
1350 }
1351
1352 module_init(do_init_aedsp16);
1353 module_exit(cleanup_aedsp16);
1354
1355 #ifndef MODULE
1356 static int __init setup_aedsp16(char *str)
1357 {
1358 /* io, irq, dma, mss_io, mpu_io, mpu_irq */
1359 int ints[7];
1360
1361 str = get_options(str, ARRAY_SIZE(ints), ints);
1362
1363 io = ints[1];
1364 irq = ints[2];
1365 dma = ints[3];
1366 mss_base = ints[4];
1367 mpu_base = ints[5];
1368 mpu_irq = ints[6];
1369 return 1;
1370 }
1371
1372 __setup("aedsp16=", setup_aedsp16);
1373 #endif
Linux with added FPC-III support