thermal: fix Mediatek thermal controller build
[linux/fpc-iii.git] / net / bridge / br_if.c
blob8217aecf025bb4bcaf69946ccc64bbf7be1c6b01
1 /*
2 * Userspace interface
3 * Linux ethernet bridge
5 * Authors:
6 * Lennert Buytenhek <buytenh@gnu.org>
8 * This program is free software; you can redistribute it and/or
9 * modify it under the terms of the GNU General Public License
10 * as published by the Free Software Foundation; either version
11 * 2 of the License, or (at your option) any later version.
14 #include <linux/kernel.h>
15 #include <linux/netdevice.h>
16 #include <linux/etherdevice.h>
17 #include <linux/netpoll.h>
18 #include <linux/ethtool.h>
19 #include <linux/if_arp.h>
20 #include <linux/module.h>
21 #include <linux/init.h>
22 #include <linux/rtnetlink.h>
23 #include <linux/if_ether.h>
24 #include <linux/slab.h>
25 #include <net/sock.h>
26 #include <linux/if_vlan.h>
27 #include <net/switchdev.h>
29 #include "br_private.h"
32 * Determine initial path cost based on speed.
33 * using recommendations from 802.1d standard
35 * Since driver might sleep need to not be holding any locks.
37 static int port_cost(struct net_device *dev)
39 struct ethtool_link_ksettings ecmd;
41 if (!__ethtool_get_link_ksettings(dev, &ecmd)) {
42 switch (ecmd.base.speed) {
43 case SPEED_10000:
44 return 2;
45 case SPEED_1000:
46 return 4;
47 case SPEED_100:
48 return 19;
49 case SPEED_10:
50 return 100;
54 /* Old silly heuristics based on name */
55 if (!strncmp(dev->name, "lec", 3))
56 return 7;
58 if (!strncmp(dev->name, "plip", 4))
59 return 2500;
61 return 100; /* assume old 10Mbps */
65 /* Check for port carrier transitions. */
66 void br_port_carrier_check(struct net_bridge_port *p)
68 struct net_device *dev = p->dev;
69 struct net_bridge *br = p->br;
71 if (!(p->flags & BR_ADMIN_COST) &&
72 netif_running(dev) && netif_oper_up(dev))
73 p->path_cost = port_cost(dev);
75 if (!netif_running(br->dev))
76 return;
78 spin_lock_bh(&br->lock);
79 if (netif_running(dev) && netif_oper_up(dev)) {
80 if (p->state == BR_STATE_DISABLED)
81 br_stp_enable_port(p);
82 } else {
83 if (p->state != BR_STATE_DISABLED)
84 br_stp_disable_port(p);
86 spin_unlock_bh(&br->lock);
89 static void br_port_set_promisc(struct net_bridge_port *p)
91 int err = 0;
93 if (br_promisc_port(p))
94 return;
96 err = dev_set_promiscuity(p->dev, 1);
97 if (err)
98 return;
100 br_fdb_unsync_static(p->br, p);
101 p->flags |= BR_PROMISC;
104 static void br_port_clear_promisc(struct net_bridge_port *p)
106 int err;
108 /* Check if the port is already non-promisc or if it doesn't
109 * support UNICAST filtering. Without unicast filtering support
110 * we'll end up re-enabling promisc mode anyway, so just check for
111 * it here.
113 if (!br_promisc_port(p) || !(p->dev->priv_flags & IFF_UNICAST_FLT))
114 return;
116 /* Since we'll be clearing the promisc mode, program the port
117 * first so that we don't have interruption in traffic.
119 err = br_fdb_sync_static(p->br, p);
120 if (err)
121 return;
123 dev_set_promiscuity(p->dev, -1);
124 p->flags &= ~BR_PROMISC;
127 /* When a port is added or removed or when certain port flags
128 * change, this function is called to automatically manage
129 * promiscuity setting of all the bridge ports. We are always called
130 * under RTNL so can skip using rcu primitives.
132 void br_manage_promisc(struct net_bridge *br)
134 struct net_bridge_port *p;
135 bool set_all = false;
137 /* If vlan filtering is disabled or bridge interface is placed
138 * into promiscuous mode, place all ports in promiscuous mode.
140 if ((br->dev->flags & IFF_PROMISC) || !br_vlan_enabled(br))
141 set_all = true;
143 list_for_each_entry(p, &br->port_list, list) {
144 if (set_all) {
145 br_port_set_promisc(p);
146 } else {
147 /* If the number of auto-ports is <= 1, then all other
148 * ports will have their output configuration
149 * statically specified through fdbs. Since ingress
150 * on the auto-port becomes forwarding/egress to other
151 * ports and egress configuration is statically known,
152 * we can say that ingress configuration of the
153 * auto-port is also statically known.
154 * This lets us disable promiscuous mode and write
155 * this config to hw.
157 if (br->auto_cnt == 0 ||
158 (br->auto_cnt == 1 && br_auto_port(p)))
159 br_port_clear_promisc(p);
160 else
161 br_port_set_promisc(p);
166 static void nbp_update_port_count(struct net_bridge *br)
168 struct net_bridge_port *p;
169 u32 cnt = 0;
171 list_for_each_entry(p, &br->port_list, list) {
172 if (br_auto_port(p))
173 cnt++;
175 if (br->auto_cnt != cnt) {
176 br->auto_cnt = cnt;
177 br_manage_promisc(br);
181 static void nbp_delete_promisc(struct net_bridge_port *p)
183 /* If port is currently promiscuous, unset promiscuity.
184 * Otherwise, it is a static port so remove all addresses
185 * from it.
187 dev_set_allmulti(p->dev, -1);
188 if (br_promisc_port(p))
189 dev_set_promiscuity(p->dev, -1);
190 else
191 br_fdb_unsync_static(p->br, p);
194 static void release_nbp(struct kobject *kobj)
196 struct net_bridge_port *p
197 = container_of(kobj, struct net_bridge_port, kobj);
198 kfree(p);
201 static struct kobj_type brport_ktype = {
202 #ifdef CONFIG_SYSFS
203 .sysfs_ops = &brport_sysfs_ops,
204 #endif
205 .release = release_nbp,
208 static void destroy_nbp(struct net_bridge_port *p)
210 struct net_device *dev = p->dev;
212 p->br = NULL;
213 p->dev = NULL;
214 dev_put(dev);
216 kobject_put(&p->kobj);
219 static void destroy_nbp_rcu(struct rcu_head *head)
221 struct net_bridge_port *p =
222 container_of(head, struct net_bridge_port, rcu);
223 destroy_nbp(p);
226 static unsigned get_max_headroom(struct net_bridge *br)
228 unsigned max_headroom = 0;
229 struct net_bridge_port *p;
231 list_for_each_entry(p, &br->port_list, list) {
232 unsigned dev_headroom = netdev_get_fwd_headroom(p->dev);
234 if (dev_headroom > max_headroom)
235 max_headroom = dev_headroom;
238 return max_headroom;
241 static void update_headroom(struct net_bridge *br, int new_hr)
243 struct net_bridge_port *p;
245 list_for_each_entry(p, &br->port_list, list)
246 netdev_set_rx_headroom(p->dev, new_hr);
248 br->dev->needed_headroom = new_hr;
251 /* Delete port(interface) from bridge is done in two steps.
252 * via RCU. First step, marks device as down. That deletes
253 * all the timers and stops new packets from flowing through.
255 * Final cleanup doesn't occur until after all CPU's finished
256 * processing packets.
258 * Protected from multiple admin operations by RTNL mutex
260 static void del_nbp(struct net_bridge_port *p)
262 struct net_bridge *br = p->br;
263 struct net_device *dev = p->dev;
265 sysfs_remove_link(br->ifobj, p->dev->name);
267 nbp_delete_promisc(p);
269 spin_lock_bh(&br->lock);
270 br_stp_disable_port(p);
271 spin_unlock_bh(&br->lock);
273 br_ifinfo_notify(RTM_DELLINK, p);
275 list_del_rcu(&p->list);
276 if (netdev_get_fwd_headroom(dev) == br->dev->needed_headroom)
277 update_headroom(br, get_max_headroom(br));
278 netdev_reset_rx_headroom(dev);
280 nbp_vlan_flush(p);
281 br_fdb_delete_by_port(br, p, 0, 1);
282 switchdev_deferred_process();
284 nbp_update_port_count(br);
286 netdev_upper_dev_unlink(dev, br->dev);
288 dev->priv_flags &= ~IFF_BRIDGE_PORT;
290 netdev_rx_handler_unregister(dev);
292 br_multicast_del_port(p);
294 kobject_uevent(&p->kobj, KOBJ_REMOVE);
295 kobject_del(&p->kobj);
297 br_netpoll_disable(p);
299 call_rcu(&p->rcu, destroy_nbp_rcu);
302 /* Delete bridge device */
303 void br_dev_delete(struct net_device *dev, struct list_head *head)
305 struct net_bridge *br = netdev_priv(dev);
306 struct net_bridge_port *p, *n;
308 list_for_each_entry_safe(p, n, &br->port_list, list) {
309 del_nbp(p);
312 br_fdb_delete_by_port(br, NULL, 0, 1);
314 br_vlan_flush(br);
315 br_multicast_dev_del(br);
316 del_timer_sync(&br->gc_timer);
318 br_sysfs_delbr(br->dev);
319 unregister_netdevice_queue(br->dev, head);
322 /* find an available port number */
323 static int find_portno(struct net_bridge *br)
325 int index;
326 struct net_bridge_port *p;
327 unsigned long *inuse;
329 inuse = kcalloc(BITS_TO_LONGS(BR_MAX_PORTS), sizeof(unsigned long),
330 GFP_KERNEL);
331 if (!inuse)
332 return -ENOMEM;
334 set_bit(0, inuse); /* zero is reserved */
335 list_for_each_entry(p, &br->port_list, list) {
336 set_bit(p->port_no, inuse);
338 index = find_first_zero_bit(inuse, BR_MAX_PORTS);
339 kfree(inuse);
341 return (index >= BR_MAX_PORTS) ? -EXFULL : index;
344 /* called with RTNL but without bridge lock */
345 static struct net_bridge_port *new_nbp(struct net_bridge *br,
346 struct net_device *dev)
348 int index;
349 struct net_bridge_port *p;
351 index = find_portno(br);
352 if (index < 0)
353 return ERR_PTR(index);
355 p = kzalloc(sizeof(*p), GFP_KERNEL);
356 if (p == NULL)
357 return ERR_PTR(-ENOMEM);
359 p->br = br;
360 dev_hold(dev);
361 p->dev = dev;
362 p->path_cost = port_cost(dev);
363 p->priority = 0x8000 >> BR_PORT_BITS;
364 p->port_no = index;
365 p->flags = BR_LEARNING | BR_FLOOD;
366 br_init_port(p);
367 br_set_state(p, BR_STATE_DISABLED);
368 br_stp_port_timer_init(p);
369 br_multicast_add_port(p);
371 return p;
374 int br_add_bridge(struct net *net, const char *name)
376 struct net_device *dev;
377 int res;
379 dev = alloc_netdev(sizeof(struct net_bridge), name, NET_NAME_UNKNOWN,
380 br_dev_setup);
382 if (!dev)
383 return -ENOMEM;
385 dev_net_set(dev, net);
386 dev->rtnl_link_ops = &br_link_ops;
388 res = register_netdev(dev);
389 if (res)
390 free_netdev(dev);
391 return res;
394 int br_del_bridge(struct net *net, const char *name)
396 struct net_device *dev;
397 int ret = 0;
399 rtnl_lock();
400 dev = __dev_get_by_name(net, name);
401 if (dev == NULL)
402 ret = -ENXIO; /* Could not find device */
404 else if (!(dev->priv_flags & IFF_EBRIDGE)) {
405 /* Attempt to delete non bridge device! */
406 ret = -EPERM;
409 else if (dev->flags & IFF_UP) {
410 /* Not shutdown yet. */
411 ret = -EBUSY;
414 else
415 br_dev_delete(dev, NULL);
417 rtnl_unlock();
418 return ret;
421 /* MTU of the bridge pseudo-device: ETH_DATA_LEN or the minimum of the ports */
422 int br_min_mtu(const struct net_bridge *br)
424 const struct net_bridge_port *p;
425 int mtu = 0;
427 ASSERT_RTNL();
429 if (list_empty(&br->port_list))
430 mtu = ETH_DATA_LEN;
431 else {
432 list_for_each_entry(p, &br->port_list, list) {
433 if (!mtu || p->dev->mtu < mtu)
434 mtu = p->dev->mtu;
437 return mtu;
440 static void br_set_gso_limits(struct net_bridge *br)
442 unsigned int gso_max_size = GSO_MAX_SIZE;
443 u16 gso_max_segs = GSO_MAX_SEGS;
444 const struct net_bridge_port *p;
446 list_for_each_entry(p, &br->port_list, list) {
447 gso_max_size = min(gso_max_size, p->dev->gso_max_size);
448 gso_max_segs = min(gso_max_segs, p->dev->gso_max_segs);
450 br->dev->gso_max_size = gso_max_size;
451 br->dev->gso_max_segs = gso_max_segs;
455 * Recomputes features using slave's features
457 netdev_features_t br_features_recompute(struct net_bridge *br,
458 netdev_features_t features)
460 struct net_bridge_port *p;
461 netdev_features_t mask;
463 if (list_empty(&br->port_list))
464 return features;
466 mask = features;
467 features &= ~NETIF_F_ONE_FOR_ALL;
469 list_for_each_entry(p, &br->port_list, list) {
470 features = netdev_increment_features(features,
471 p->dev->features, mask);
473 features = netdev_add_tso_features(features, mask);
475 return features;
478 /* called with RTNL */
479 int br_add_if(struct net_bridge *br, struct net_device *dev)
481 struct net_bridge_port *p;
482 int err = 0;
483 unsigned br_hr, dev_hr;
484 bool changed_addr;
486 /* Don't allow bridging non-ethernet like devices, or DSA-enabled
487 * master network devices since the bridge layer rx_handler prevents
488 * the DSA fake ethertype handler to be invoked, so we do not strip off
489 * the DSA switch tag protocol header and the bridge layer just return
490 * RX_HANDLER_CONSUMED, stopping RX processing for these frames.
492 if ((dev->flags & IFF_LOOPBACK) ||
493 dev->type != ARPHRD_ETHER || dev->addr_len != ETH_ALEN ||
494 !is_valid_ether_addr(dev->dev_addr) ||
495 netdev_uses_dsa(dev))
496 return -EINVAL;
498 /* No bridging of bridges */
499 if (dev->netdev_ops->ndo_start_xmit == br_dev_xmit)
500 return -ELOOP;
502 /* Device is already being bridged */
503 if (br_port_exists(dev))
504 return -EBUSY;
506 /* No bridging devices that dislike that (e.g. wireless) */
507 if (dev->priv_flags & IFF_DONT_BRIDGE)
508 return -EOPNOTSUPP;
510 p = new_nbp(br, dev);
511 if (IS_ERR(p))
512 return PTR_ERR(p);
514 call_netdevice_notifiers(NETDEV_JOIN, dev);
516 err = dev_set_allmulti(dev, 1);
517 if (err)
518 goto put_back;
520 err = kobject_init_and_add(&p->kobj, &brport_ktype, &(dev->dev.kobj),
521 SYSFS_BRIDGE_PORT_ATTR);
522 if (err)
523 goto err1;
525 err = br_sysfs_addif(p);
526 if (err)
527 goto err2;
529 err = br_netpoll_enable(p);
530 if (err)
531 goto err3;
533 err = netdev_rx_handler_register(dev, br_handle_frame, p);
534 if (err)
535 goto err4;
537 dev->priv_flags |= IFF_BRIDGE_PORT;
539 err = netdev_master_upper_dev_link(dev, br->dev, NULL, NULL);
540 if (err)
541 goto err5;
543 dev_disable_lro(dev);
545 list_add_rcu(&p->list, &br->port_list);
547 nbp_update_port_count(br);
549 netdev_update_features(br->dev);
551 br_hr = br->dev->needed_headroom;
552 dev_hr = netdev_get_fwd_headroom(dev);
553 if (br_hr < dev_hr)
554 update_headroom(br, dev_hr);
555 else
556 netdev_set_rx_headroom(dev, br_hr);
558 if (br_fdb_insert(br, p, dev->dev_addr, 0))
559 netdev_err(dev, "failed insert local address bridge forwarding table\n");
561 err = nbp_vlan_init(p);
562 if (err) {
563 netdev_err(dev, "failed to initialize vlan filtering on this port\n");
564 goto err6;
567 spin_lock_bh(&br->lock);
568 changed_addr = br_stp_recalculate_bridge_id(br);
570 if (netif_running(dev) && netif_oper_up(dev) &&
571 (br->dev->flags & IFF_UP))
572 br_stp_enable_port(p);
573 spin_unlock_bh(&br->lock);
575 br_ifinfo_notify(RTM_NEWLINK, p);
577 if (changed_addr)
578 call_netdevice_notifiers(NETDEV_CHANGEADDR, br->dev);
580 dev_set_mtu(br->dev, br_min_mtu(br));
581 br_set_gso_limits(br);
583 kobject_uevent(&p->kobj, KOBJ_ADD);
585 return 0;
587 err6:
588 list_del_rcu(&p->list);
589 br_fdb_delete_by_port(br, p, 0, 1);
590 nbp_update_port_count(br);
591 netdev_upper_dev_unlink(dev, br->dev);
593 err5:
594 dev->priv_flags &= ~IFF_BRIDGE_PORT;
595 netdev_rx_handler_unregister(dev);
596 err4:
597 br_netpoll_disable(p);
598 err3:
599 sysfs_remove_link(br->ifobj, p->dev->name);
600 err2:
601 kobject_put(&p->kobj);
602 p = NULL; /* kobject_put frees */
603 err1:
604 dev_set_allmulti(dev, -1);
605 put_back:
606 dev_put(dev);
607 kfree(p);
608 return err;
611 /* called with RTNL */
612 int br_del_if(struct net_bridge *br, struct net_device *dev)
614 struct net_bridge_port *p;
615 bool changed_addr;
617 p = br_port_get_rtnl(dev);
618 if (!p || p->br != br)
619 return -EINVAL;
621 /* Since more than one interface can be attached to a bridge,
622 * there still maybe an alternate path for netconsole to use;
623 * therefore there is no reason for a NETDEV_RELEASE event.
625 del_nbp(p);
627 dev_set_mtu(br->dev, br_min_mtu(br));
628 br_set_gso_limits(br);
630 spin_lock_bh(&br->lock);
631 changed_addr = br_stp_recalculate_bridge_id(br);
632 spin_unlock_bh(&br->lock);
634 if (changed_addr)
635 call_netdevice_notifiers(NETDEV_CHANGEADDR, br->dev);
637 netdev_update_features(br->dev);
639 return 0;
642 void br_port_flags_change(struct net_bridge_port *p, unsigned long mask)
644 struct net_bridge *br = p->br;
646 if (mask & BR_AUTO_MASK)
647 nbp_update_port_count(br);