2 * Performance event support for the System z CPU-measurement Sampling Facility
4 * Copyright IBM Corp. 2013
5 * Author(s): Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License (version 2 only)
9 * as published by the Free Software Foundation.
11 #define KMSG_COMPONENT "cpum_sf"
12 #define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
14 #include <linux/kernel.h>
15 #include <linux/kernel_stat.h>
16 #include <linux/perf_event.h>
17 #include <linux/percpu.h>
18 #include <linux/notifier.h>
19 #include <linux/export.h>
20 #include <linux/slab.h>
22 #include <linux/moduleparam.h>
23 #include <asm/cpu_mf.h>
25 #include <asm/debug.h>
26 #include <asm/timex.h>
28 /* Minimum number of sample-data-block-tables:
29 * At least one table is required for the sampling buffer structure.
30 * A single table contains up to 511 pointers to sample-data-blocks.
32 #define CPUM_SF_MIN_SDBT 1
34 /* Number of sample-data-blocks per sample-data-block-table (SDBT):
35 * A table contains SDB pointers (8 bytes) and one table-link entry
36 * that points to the origin of the next SDBT.
38 #define CPUM_SF_SDB_PER_TABLE ((PAGE_SIZE - 8) / 8)
40 /* Maximum page offset for an SDBT table-link entry:
41 * If this page offset is reached, a table-link entry to the next SDBT
44 #define CPUM_SF_SDBT_TL_OFFSET (CPUM_SF_SDB_PER_TABLE * 8)
45 static inline int require_table_link(const void *sdbt
)
47 return ((unsigned long) sdbt
& ~PAGE_MASK
) == CPUM_SF_SDBT_TL_OFFSET
;
50 /* Minimum and maximum sampling buffer sizes:
52 * This number represents the maximum size of the sampling buffer taking
53 * the number of sample-data-block-tables into account. Note that these
54 * numbers apply to the basic-sampling function only.
55 * The maximum number of SDBs is increased by CPUM_SF_SDB_DIAG_FACTOR if
56 * the diagnostic-sampling function is active.
58 * Sampling buffer size Buffer characteristics
59 * ---------------------------------------------------
60 * 64KB == 16 pages (4KB per page)
61 * 1 page for SDB-tables
64 * 32MB == 8192 pages (4KB per page)
65 * 16 pages for SDB-tables
68 static unsigned long __read_mostly CPUM_SF_MIN_SDB
= 15;
69 static unsigned long __read_mostly CPUM_SF_MAX_SDB
= 8176;
70 static unsigned long __read_mostly CPUM_SF_SDB_DIAG_FACTOR
= 1;
73 unsigned long *sdbt
; /* Sample-data-block-table origin */
74 /* buffer characteristics (required for buffer increments) */
75 unsigned long num_sdb
; /* Number of sample-data-blocks */
76 unsigned long num_sdbt
; /* Number of sample-data-block-tables */
77 unsigned long *tail
; /* last sample-data-block-table */
81 /* CPU-measurement sampling information block */
82 struct hws_qsi_info_block qsi
;
83 /* CPU-measurement sampling control block */
84 struct hws_lsctl_request_block lsctl
;
85 struct sf_buffer sfb
; /* Sampling buffer */
86 unsigned int flags
; /* Status flags */
87 struct perf_event
*event
; /* Scheduled perf event */
89 static DEFINE_PER_CPU(struct cpu_hw_sf
, cpu_hw_sf
);
92 static debug_info_t
*sfdbg
;
95 * sf_disable() - Switch off sampling facility
97 static int sf_disable(void)
99 struct hws_lsctl_request_block sreq
;
101 memset(&sreq
, 0, sizeof(sreq
));
106 * sf_buffer_available() - Check for an allocated sampling buffer
108 static int sf_buffer_available(struct cpu_hw_sf
*cpuhw
)
110 return !!cpuhw
->sfb
.sdbt
;
114 * deallocate sampling facility buffer
116 static void free_sampling_buffer(struct sf_buffer
*sfb
)
118 unsigned long *sdbt
, *curr
;
126 /* Free the SDBT after all SDBs are processed... */
131 /* Process table-link entries */
132 if (is_link_entry(curr
)) {
133 curr
= get_next_sdbt(curr
);
135 free_page((unsigned long) sdbt
);
137 /* If the origin is reached, sampling buffer is freed */
138 if (curr
== sfb
->sdbt
)
143 /* Process SDB pointer */
151 debug_sprintf_event(sfdbg
, 5,
152 "free_sampling_buffer: freed sdbt=%p\n", sfb
->sdbt
);
153 memset(sfb
, 0, sizeof(*sfb
));
156 static int alloc_sample_data_block(unsigned long *sdbt
, gfp_t gfp_flags
)
158 unsigned long sdb
, *trailer
;
160 /* Allocate and initialize sample-data-block */
161 sdb
= get_zeroed_page(gfp_flags
);
164 trailer
= trailer_entry_ptr(sdb
);
165 *trailer
= SDB_TE_ALERT_REQ_MASK
;
167 /* Link SDB into the sample-data-block-table */
174 * realloc_sampling_buffer() - extend sampler memory
176 * Allocates new sample-data-blocks and adds them to the specified sampling
179 * Important: This modifies the sampling buffer and must be called when the
180 * sampling facility is disabled.
182 * Returns zero on success, non-zero otherwise.
184 static int realloc_sampling_buffer(struct sf_buffer
*sfb
,
185 unsigned long num_sdb
, gfp_t gfp_flags
)
188 unsigned long *new, *tail
;
190 if (!sfb
->sdbt
|| !sfb
->tail
)
193 if (!is_link_entry(sfb
->tail
))
196 /* Append to the existing sampling buffer, overwriting the table-link
198 * The tail variables always points to the "tail" (last and table-link)
199 * entry in an SDB-table.
203 /* Do a sanity check whether the table-link entry points to
204 * the sampling buffer origin.
206 if (sfb
->sdbt
!= get_next_sdbt(tail
)) {
207 debug_sprintf_event(sfdbg
, 3, "realloc_sampling_buffer: "
208 "sampling buffer is not linked: origin=%p"
210 (void *) sfb
->sdbt
, (void *) tail
);
214 /* Allocate remaining SDBs */
216 for (i
= 0; i
< num_sdb
; i
++) {
217 /* Allocate a new SDB-table if it is full. */
218 if (require_table_link(tail
)) {
219 new = (unsigned long *) get_zeroed_page(gfp_flags
);
225 /* Link current page to tail of chain */
226 *tail
= (unsigned long)(void *) new + 1;
230 /* Allocate a new sample-data-block.
231 * If there is not enough memory, stop the realloc process
232 * and simply use what was allocated. If this is a temporary
233 * issue, a new realloc call (if required) might succeed.
235 rc
= alloc_sample_data_block(tail
, gfp_flags
);
242 /* Link sampling buffer to its origin */
243 *tail
= (unsigned long) sfb
->sdbt
+ 1;
246 debug_sprintf_event(sfdbg
, 4, "realloc_sampling_buffer: new buffer"
247 " settings: sdbt=%lu sdb=%lu\n",
248 sfb
->num_sdbt
, sfb
->num_sdb
);
253 * allocate_sampling_buffer() - allocate sampler memory
255 * Allocates and initializes a sampling buffer structure using the
256 * specified number of sample-data-blocks (SDB). For each allocation,
257 * a 4K page is used. The number of sample-data-block-tables (SDBT)
258 * are calculated from SDBs.
259 * Also set the ALERT_REQ mask in each SDBs trailer.
261 * Returns zero on success, non-zero otherwise.
263 static int alloc_sampling_buffer(struct sf_buffer
*sfb
, unsigned long num_sdb
)
270 /* Allocate the sample-data-block-table origin */
271 sfb
->sdbt
= (unsigned long *) get_zeroed_page(GFP_KERNEL
);
277 /* Link the table origin to point to itself to prepare for
278 * realloc_sampling_buffer() invocation.
280 sfb
->tail
= sfb
->sdbt
;
281 *sfb
->tail
= (unsigned long)(void *) sfb
->sdbt
+ 1;
283 /* Allocate requested number of sample-data-blocks */
284 rc
= realloc_sampling_buffer(sfb
, num_sdb
, GFP_KERNEL
);
286 free_sampling_buffer(sfb
);
287 debug_sprintf_event(sfdbg
, 4, "alloc_sampling_buffer: "
288 "realloc_sampling_buffer failed with rc=%i\n", rc
);
290 debug_sprintf_event(sfdbg
, 4,
291 "alloc_sampling_buffer: tear=%p dear=%p\n",
292 sfb
->sdbt
, (void *) *sfb
->sdbt
);
296 static void sfb_set_limits(unsigned long min
, unsigned long max
)
298 struct hws_qsi_info_block si
;
300 CPUM_SF_MIN_SDB
= min
;
301 CPUM_SF_MAX_SDB
= max
;
303 memset(&si
, 0, sizeof(si
));
305 CPUM_SF_SDB_DIAG_FACTOR
= DIV_ROUND_UP(si
.dsdes
, si
.bsdes
);
308 static unsigned long sfb_max_limit(struct hw_perf_event
*hwc
)
310 return SAMPL_DIAG_MODE(hwc
) ? CPUM_SF_MAX_SDB
* CPUM_SF_SDB_DIAG_FACTOR
314 static unsigned long sfb_pending_allocs(struct sf_buffer
*sfb
,
315 struct hw_perf_event
*hwc
)
318 return SFB_ALLOC_REG(hwc
);
319 if (SFB_ALLOC_REG(hwc
) > sfb
->num_sdb
)
320 return SFB_ALLOC_REG(hwc
) - sfb
->num_sdb
;
324 static int sfb_has_pending_allocs(struct sf_buffer
*sfb
,
325 struct hw_perf_event
*hwc
)
327 return sfb_pending_allocs(sfb
, hwc
) > 0;
330 static void sfb_account_allocs(unsigned long num
, struct hw_perf_event
*hwc
)
332 /* Limit the number of SDBs to not exceed the maximum */
333 num
= min_t(unsigned long, num
, sfb_max_limit(hwc
) - SFB_ALLOC_REG(hwc
));
335 SFB_ALLOC_REG(hwc
) += num
;
338 static void sfb_init_allocs(unsigned long num
, struct hw_perf_event
*hwc
)
340 SFB_ALLOC_REG(hwc
) = 0;
341 sfb_account_allocs(num
, hwc
);
344 static size_t event_sample_size(struct hw_perf_event
*hwc
)
346 struct sf_raw_sample
*sfr
= (struct sf_raw_sample
*) RAWSAMPLE_REG(hwc
);
349 /* The sample size depends on the sampling function: The basic-sampling
350 * function must be always enabled, diagnostic-sampling function is
353 sample_size
= sfr
->bsdes
;
354 if (SAMPL_DIAG_MODE(hwc
))
355 sample_size
+= sfr
->dsdes
;
360 static void deallocate_buffers(struct cpu_hw_sf
*cpuhw
)
363 free_sampling_buffer(&cpuhw
->sfb
);
366 static int allocate_buffers(struct cpu_hw_sf
*cpuhw
, struct hw_perf_event
*hwc
)
368 unsigned long n_sdb
, freq
, factor
;
369 size_t sfr_size
, sample_size
;
370 struct sf_raw_sample
*sfr
;
372 /* Allocate raw sample buffer
374 * The raw sample buffer is used to temporarily store sampling data
375 * entries for perf raw sample processing. The buffer size mainly
376 * depends on the size of diagnostic-sampling data entries which is
377 * machine-specific. The exact size calculation includes:
378 * 1. The first 4 bytes of diagnostic-sampling data entries are
379 * already reflected in the sf_raw_sample structure. Subtract
381 * 2. The perf raw sample data must be 8-byte aligned (u64) and
382 * perf's internal data size must be considered too. So add
383 * an additional u32 for correct alignment and subtract before
384 * allocating the buffer.
385 * 3. Store the raw sample buffer pointer in the perf event
386 * hardware structure.
388 sfr_size
= ALIGN((sizeof(*sfr
) - sizeof(sfr
->diag
) + cpuhw
->qsi
.dsdes
) +
389 sizeof(u32
), sizeof(u64
));
390 sfr_size
-= sizeof(u32
);
391 sfr
= kzalloc(sfr_size
, GFP_KERNEL
);
394 sfr
->size
= sfr_size
;
395 sfr
->bsdes
= cpuhw
->qsi
.bsdes
;
396 sfr
->dsdes
= cpuhw
->qsi
.dsdes
;
397 RAWSAMPLE_REG(hwc
) = (unsigned long) sfr
;
399 /* Calculate sampling buffers using 4K pages
401 * 1. Determine the sample data size which depends on the used
402 * sampling functions, for example, basic-sampling or
403 * basic-sampling with diagnostic-sampling.
405 * 2. Use the sampling frequency as input. The sampling buffer is
406 * designed for almost one second. This can be adjusted through
407 * the "factor" variable.
408 * In any case, alloc_sampling_buffer() sets the Alert Request
409 * Control indicator to trigger a measurement-alert to harvest
410 * sample-data-blocks (sdb).
412 * 3. Compute the number of sample-data-blocks and ensure a minimum
413 * of CPUM_SF_MIN_SDB. Also ensure the upper limit does not
414 * exceed a "calculated" maximum. The symbolic maximum is
415 * designed for basic-sampling only and needs to be increased if
416 * diagnostic-sampling is active.
417 * See also the remarks for these symbolic constants.
419 * 4. Compute the number of sample-data-block-tables (SDBT) and
420 * ensure a minimum of CPUM_SF_MIN_SDBT (one table can manage up
423 sample_size
= event_sample_size(hwc
);
424 freq
= sample_rate_to_freq(&cpuhw
->qsi
, SAMPL_RATE(hwc
));
426 n_sdb
= DIV_ROUND_UP(freq
, factor
* ((PAGE_SIZE
-64) / sample_size
));
427 if (n_sdb
< CPUM_SF_MIN_SDB
)
428 n_sdb
= CPUM_SF_MIN_SDB
;
430 /* If there is already a sampling buffer allocated, it is very likely
431 * that the sampling facility is enabled too. If the event to be
432 * initialized requires a greater sampling buffer, the allocation must
433 * be postponed. Changing the sampling buffer requires the sampling
434 * facility to be in the disabled state. So, account the number of
435 * required SDBs and let cpumsf_pmu_enable() resize the buffer just
436 * before the event is started.
438 sfb_init_allocs(n_sdb
, hwc
);
439 if (sf_buffer_available(cpuhw
))
442 debug_sprintf_event(sfdbg
, 3,
443 "allocate_buffers: rate=%lu f=%lu sdb=%lu/%lu"
444 " sample_size=%lu cpuhw=%p\n",
445 SAMPL_RATE(hwc
), freq
, n_sdb
, sfb_max_limit(hwc
),
448 return alloc_sampling_buffer(&cpuhw
->sfb
,
449 sfb_pending_allocs(&cpuhw
->sfb
, hwc
));
452 static unsigned long min_percent(unsigned int percent
, unsigned long base
,
455 return min_t(unsigned long, min
, DIV_ROUND_UP(percent
* base
, 100));
458 static unsigned long compute_sfb_extent(unsigned long ratio
, unsigned long base
)
460 /* Use a percentage-based approach to extend the sampling facility
461 * buffer. Accept up to 5% sample data loss.
462 * Vary the extents between 1% to 5% of the current number of
463 * sample-data-blocks.
468 return min_percent(1, base
, 1);
470 return min_percent(1, base
, 1);
472 return min_percent(2, base
, 2);
474 return min_percent(3, base
, 3);
476 return min_percent(4, base
, 4);
478 return min_percent(5, base
, 8);
481 static void sfb_account_overflows(struct cpu_hw_sf
*cpuhw
,
482 struct hw_perf_event
*hwc
)
484 unsigned long ratio
, num
;
486 if (!OVERFLOW_REG(hwc
))
489 /* The sample_overflow contains the average number of sample data
490 * that has been lost because sample-data-blocks were full.
492 * Calculate the total number of sample data entries that has been
493 * discarded. Then calculate the ratio of lost samples to total samples
494 * per second in percent.
496 ratio
= DIV_ROUND_UP(100 * OVERFLOW_REG(hwc
) * cpuhw
->sfb
.num_sdb
,
497 sample_rate_to_freq(&cpuhw
->qsi
, SAMPL_RATE(hwc
)));
499 /* Compute number of sample-data-blocks */
500 num
= compute_sfb_extent(ratio
, cpuhw
->sfb
.num_sdb
);
502 sfb_account_allocs(num
, hwc
);
504 debug_sprintf_event(sfdbg
, 5, "sfb: overflow: overflow=%llu ratio=%lu"
505 " num=%lu\n", OVERFLOW_REG(hwc
), ratio
, num
);
506 OVERFLOW_REG(hwc
) = 0;
509 /* extend_sampling_buffer() - Extend sampling buffer
510 * @sfb: Sampling buffer structure (for local CPU)
511 * @hwc: Perf event hardware structure
513 * Use this function to extend the sampling buffer based on the overflow counter
514 * and postponed allocation extents stored in the specified Perf event hardware.
516 * Important: This function disables the sampling facility in order to safely
517 * change the sampling buffer structure. Do not call this function
518 * when the PMU is active.
520 static void extend_sampling_buffer(struct sf_buffer
*sfb
,
521 struct hw_perf_event
*hwc
)
523 unsigned long num
, num_old
;
526 num
= sfb_pending_allocs(sfb
, hwc
);
529 num_old
= sfb
->num_sdb
;
531 /* Disable the sampling facility to reset any states and also
532 * clear pending measurement alerts.
536 /* Extend the sampling buffer.
537 * This memory allocation typically happens in an atomic context when
538 * called by perf. Because this is a reallocation, it is fine if the
539 * new SDB-request cannot be satisfied immediately.
541 rc
= realloc_sampling_buffer(sfb
, num
, GFP_ATOMIC
);
543 debug_sprintf_event(sfdbg
, 5, "sfb: extend: realloc "
544 "failed with rc=%i\n", rc
);
546 if (sfb_has_pending_allocs(sfb
, hwc
))
547 debug_sprintf_event(sfdbg
, 5, "sfb: extend: "
548 "req=%lu alloc=%lu remaining=%lu\n",
549 num
, sfb
->num_sdb
- num_old
,
550 sfb_pending_allocs(sfb
, hwc
));
554 /* Number of perf events counting hardware events */
555 static atomic_t num_events
;
556 /* Used to avoid races in calling reserve/release_cpumf_hardware */
557 static DEFINE_MUTEX(pmc_reserve_mutex
);
560 #define PMC_RELEASE 1
561 #define PMC_FAILURE 2
562 static void setup_pmc_cpu(void *flags
)
565 struct cpu_hw_sf
*cpusf
= this_cpu_ptr(&cpu_hw_sf
);
568 switch (*((int *) flags
)) {
570 memset(cpusf
, 0, sizeof(*cpusf
));
571 err
= qsi(&cpusf
->qsi
);
574 cpusf
->flags
|= PMU_F_RESERVED
;
577 pr_err("Switching off the sampling facility failed "
578 "with rc=%i\n", err
);
579 debug_sprintf_event(sfdbg
, 5,
580 "setup_pmc_cpu: initialized: cpuhw=%p\n", cpusf
);
583 cpusf
->flags
&= ~PMU_F_RESERVED
;
586 pr_err("Switching off the sampling facility failed "
587 "with rc=%i\n", err
);
589 deallocate_buffers(cpusf
);
590 debug_sprintf_event(sfdbg
, 5,
591 "setup_pmc_cpu: released: cpuhw=%p\n", cpusf
);
595 *((int *) flags
) |= PMC_FAILURE
;
598 static void release_pmc_hardware(void)
600 int flags
= PMC_RELEASE
;
602 irq_subclass_unregister(IRQ_SUBCLASS_MEASUREMENT_ALERT
);
603 on_each_cpu(setup_pmc_cpu
, &flags
, 1);
606 static int reserve_pmc_hardware(void)
608 int flags
= PMC_INIT
;
610 on_each_cpu(setup_pmc_cpu
, &flags
, 1);
611 if (flags
& PMC_FAILURE
) {
612 release_pmc_hardware();
615 irq_subclass_register(IRQ_SUBCLASS_MEASUREMENT_ALERT
);
620 static void hw_perf_event_destroy(struct perf_event
*event
)
622 /* Free raw sample buffer */
623 if (RAWSAMPLE_REG(&event
->hw
))
624 kfree((void *) RAWSAMPLE_REG(&event
->hw
));
626 /* Release PMC if this is the last perf event */
627 if (!atomic_add_unless(&num_events
, -1, 1)) {
628 mutex_lock(&pmc_reserve_mutex
);
629 if (atomic_dec_return(&num_events
) == 0)
630 release_pmc_hardware();
631 mutex_unlock(&pmc_reserve_mutex
);
635 static void hw_init_period(struct hw_perf_event
*hwc
, u64 period
)
637 hwc
->sample_period
= period
;
638 hwc
->last_period
= hwc
->sample_period
;
639 local64_set(&hwc
->period_left
, hwc
->sample_period
);
642 static void hw_reset_registers(struct hw_perf_event
*hwc
,
643 unsigned long *sdbt_origin
)
645 struct sf_raw_sample
*sfr
;
647 /* (Re)set to first sample-data-block-table */
648 TEAR_REG(hwc
) = (unsigned long) sdbt_origin
;
650 /* (Re)set raw sampling buffer register */
651 sfr
= (struct sf_raw_sample
*) RAWSAMPLE_REG(hwc
);
652 memset(&sfr
->basic
, 0, sizeof(sfr
->basic
));
653 memset(&sfr
->diag
, 0, sfr
->dsdes
);
656 static unsigned long hw_limit_rate(const struct hws_qsi_info_block
*si
,
659 return clamp_t(unsigned long, rate
,
660 si
->min_sampl_rate
, si
->max_sampl_rate
);
663 static int __hw_perf_event_init(struct perf_event
*event
)
665 struct cpu_hw_sf
*cpuhw
;
666 struct hws_qsi_info_block si
;
667 struct perf_event_attr
*attr
= &event
->attr
;
668 struct hw_perf_event
*hwc
= &event
->hw
;
672 /* Reserve CPU-measurement sampling facility */
674 if (!atomic_inc_not_zero(&num_events
)) {
675 mutex_lock(&pmc_reserve_mutex
);
676 if (atomic_read(&num_events
) == 0 && reserve_pmc_hardware())
679 atomic_inc(&num_events
);
680 mutex_unlock(&pmc_reserve_mutex
);
682 event
->destroy
= hw_perf_event_destroy
;
687 /* Access per-CPU sampling information (query sampling info) */
689 * The event->cpu value can be -1 to count on every CPU, for example,
690 * when attaching to a task. If this is specified, use the query
691 * sampling info from the current CPU, otherwise use event->cpu to
692 * retrieve the per-CPU information.
693 * Later, cpuhw indicates whether to allocate sampling buffers for a
694 * particular CPU (cpuhw!=NULL) or each online CPU (cpuw==NULL).
696 memset(&si
, 0, sizeof(si
));
698 if (event
->cpu
== -1)
701 /* Event is pinned to a particular CPU, retrieve the per-CPU
702 * sampling structure for accessing the CPU-specific QSI.
704 cpuhw
= &per_cpu(cpu_hw_sf
, event
->cpu
);
708 /* Check sampling facility authorization and, if not authorized,
709 * fall back to other PMUs. It is safe to check any CPU because
710 * the authorization is identical for all configured CPUs.
717 /* Always enable basic sampling */
718 SAMPL_FLAGS(hwc
) = PERF_CPUM_SF_BASIC_MODE
;
720 /* Check if diagnostic sampling is requested. Deny if the required
721 * sampling authorization is missing.
723 if (attr
->config
== PERF_EVENT_CPUM_SF_DIAG
) {
728 SAMPL_FLAGS(hwc
) |= PERF_CPUM_SF_DIAG_MODE
;
731 /* Check and set other sampling flags */
732 if (attr
->config1
& PERF_CPUM_SF_FULL_BLOCKS
)
733 SAMPL_FLAGS(hwc
) |= PERF_CPUM_SF_FULL_BLOCKS
;
735 /* The sampling information (si) contains information about the
736 * min/max sampling intervals and the CPU speed. So calculate the
737 * correct sampling interval and avoid the whole period adjust
742 rate
= freq_to_sample_rate(&si
, attr
->sample_freq
);
743 rate
= hw_limit_rate(&si
, rate
);
745 attr
->sample_period
= rate
;
747 /* The min/max sampling rates specifies the valid range
748 * of sample periods. If the specified sample period is
749 * out of range, limit the period to the range boundary.
751 rate
= hw_limit_rate(&si
, hwc
->sample_period
);
753 /* The perf core maintains a maximum sample rate that is
754 * configurable through the sysctl interface. Ensure the
755 * sampling rate does not exceed this value. This also helps
756 * to avoid throttling when pushing samples with
757 * perf_event_overflow().
759 if (sample_rate_to_freq(&si
, rate
) >
760 sysctl_perf_event_sample_rate
) {
762 debug_sprintf_event(sfdbg
, 1, "Sampling rate exceeds maximum perf sample rate\n");
766 SAMPL_RATE(hwc
) = rate
;
767 hw_init_period(hwc
, SAMPL_RATE(hwc
));
769 /* Initialize sample data overflow accounting */
770 hwc
->extra_reg
.reg
= REG_OVERFLOW
;
771 OVERFLOW_REG(hwc
) = 0;
773 /* Allocate the per-CPU sampling buffer using the CPU information
774 * from the event. If the event is not pinned to a particular
775 * CPU (event->cpu == -1; or cpuhw == NULL), allocate sampling
776 * buffers for each online CPU.
779 /* Event is pinned to a particular CPU */
780 err
= allocate_buffers(cpuhw
, hwc
);
782 /* Event is not pinned, allocate sampling buffer on
785 for_each_online_cpu(cpu
) {
786 cpuhw
= &per_cpu(cpu_hw_sf
, cpu
);
787 err
= allocate_buffers(cpuhw
, hwc
);
796 static int cpumsf_pmu_event_init(struct perf_event
*event
)
800 /* No support for taken branch sampling */
801 if (has_branch_stack(event
))
804 switch (event
->attr
.type
) {
806 if ((event
->attr
.config
!= PERF_EVENT_CPUM_SF
) &&
807 (event
->attr
.config
!= PERF_EVENT_CPUM_SF_DIAG
))
810 case PERF_TYPE_HARDWARE
:
811 /* Support sampling of CPU cycles in addition to the
812 * counter facility. However, the counter facility
813 * is more precise and, hence, restrict this PMU to
814 * sampling events only.
816 if (event
->attr
.config
!= PERF_COUNT_HW_CPU_CYCLES
)
818 if (!is_sampling_event(event
))
825 /* Check online status of the CPU to which the event is pinned */
826 if (event
->cpu
>= nr_cpumask_bits
||
827 (event
->cpu
>= 0 && !cpu_online(event
->cpu
)))
830 /* Force reset of idle/hv excludes regardless of what the
833 if (event
->attr
.exclude_hv
)
834 event
->attr
.exclude_hv
= 0;
835 if (event
->attr
.exclude_idle
)
836 event
->attr
.exclude_idle
= 0;
838 err
= __hw_perf_event_init(event
);
841 event
->destroy(event
);
845 static void cpumsf_pmu_enable(struct pmu
*pmu
)
847 struct cpu_hw_sf
*cpuhw
= this_cpu_ptr(&cpu_hw_sf
);
848 struct hw_perf_event
*hwc
;
851 if (cpuhw
->flags
& PMU_F_ENABLED
)
854 if (cpuhw
->flags
& PMU_F_ERR_MASK
)
857 /* Check whether to extent the sampling buffer.
859 * Two conditions trigger an increase of the sampling buffer for a
861 * 1. Postponed buffer allocations from the event initialization.
862 * 2. Sampling overflows that contribute to pending allocations.
864 * Note that the extend_sampling_buffer() function disables the sampling
865 * facility, but it can be fully re-enabled using sampling controls that
866 * have been saved in cpumsf_pmu_disable().
869 hwc
= &cpuhw
->event
->hw
;
870 /* Account number of overflow-designated buffer extents */
871 sfb_account_overflows(cpuhw
, hwc
);
872 if (sfb_has_pending_allocs(&cpuhw
->sfb
, hwc
))
873 extend_sampling_buffer(&cpuhw
->sfb
, hwc
);
876 /* (Re)enable the PMU and sampling facility */
877 cpuhw
->flags
|= PMU_F_ENABLED
;
880 err
= lsctl(&cpuhw
->lsctl
);
882 cpuhw
->flags
&= ~PMU_F_ENABLED
;
883 pr_err("Loading sampling controls failed: op=%i err=%i\n",
888 debug_sprintf_event(sfdbg
, 6, "pmu_enable: es=%i cs=%i ed=%i cd=%i "
889 "tear=%p dear=%p\n", cpuhw
->lsctl
.es
, cpuhw
->lsctl
.cs
,
890 cpuhw
->lsctl
.ed
, cpuhw
->lsctl
.cd
,
891 (void *) cpuhw
->lsctl
.tear
, (void *) cpuhw
->lsctl
.dear
);
894 static void cpumsf_pmu_disable(struct pmu
*pmu
)
896 struct cpu_hw_sf
*cpuhw
= this_cpu_ptr(&cpu_hw_sf
);
897 struct hws_lsctl_request_block inactive
;
898 struct hws_qsi_info_block si
;
901 if (!(cpuhw
->flags
& PMU_F_ENABLED
))
904 if (cpuhw
->flags
& PMU_F_ERR_MASK
)
907 /* Switch off sampling activation control */
908 inactive
= cpuhw
->lsctl
;
912 err
= lsctl(&inactive
);
914 pr_err("Loading sampling controls failed: op=%i err=%i\n",
919 /* Save state of TEAR and DEAR register contents */
921 /* TEAR/DEAR values are valid only if the sampling facility is
922 * enabled. Note that cpumsf_pmu_disable() might be called even
923 * for a disabled sampling facility because cpumsf_pmu_enable()
924 * controls the enable/disable state.
927 cpuhw
->lsctl
.tear
= si
.tear
;
928 cpuhw
->lsctl
.dear
= si
.dear
;
931 debug_sprintf_event(sfdbg
, 3, "cpumsf_pmu_disable: "
932 "qsi() failed with err=%i\n", err
);
934 cpuhw
->flags
&= ~PMU_F_ENABLED
;
937 /* perf_exclude_event() - Filter event
938 * @event: The perf event
939 * @regs: pt_regs structure
940 * @sde_regs: Sample-data-entry (sde) regs structure
942 * Filter perf events according to their exclude specification.
944 * Return non-zero if the event shall be excluded.
946 static int perf_exclude_event(struct perf_event
*event
, struct pt_regs
*regs
,
947 struct perf_sf_sde_regs
*sde_regs
)
949 if (event
->attr
.exclude_user
&& user_mode(regs
))
951 if (event
->attr
.exclude_kernel
&& !user_mode(regs
))
953 if (event
->attr
.exclude_guest
&& sde_regs
->in_guest
)
955 if (event
->attr
.exclude_host
&& !sde_regs
->in_guest
)
960 /* perf_push_sample() - Push samples to perf
961 * @event: The perf event
962 * @sample: Hardware sample data
964 * Use the hardware sample data to create perf event sample. The sample
965 * is the pushed to the event subsystem and the function checks for
966 * possible event overflows. If an event overflow occurs, the PMU is
969 * Return non-zero if an event overflow occurred.
971 static int perf_push_sample(struct perf_event
*event
, struct sf_raw_sample
*sfr
)
975 struct perf_sf_sde_regs
*sde_regs
;
976 struct perf_sample_data data
;
977 struct perf_raw_record raw
= {
984 /* Setup perf sample */
985 perf_sample_data_init(&data
, 0, event
->hw
.last_period
);
988 /* Setup pt_regs to look like an CPU-measurement external interrupt
989 * using the Program Request Alert code. The regs.int_parm_long
990 * field which is unused contains additional sample-data-entry related
993 memset(®s
, 0, sizeof(regs
));
994 regs
.int_code
= 0x1407;
995 regs
.int_parm
= CPU_MF_INT_SF_PRA
;
996 sde_regs
= (struct perf_sf_sde_regs
*) ®s
.int_parm_long
;
998 psw_bits(regs
.psw
).ia
= sfr
->basic
.ia
;
999 psw_bits(regs
.psw
).t
= sfr
->basic
.T
;
1000 psw_bits(regs
.psw
).w
= sfr
->basic
.W
;
1001 psw_bits(regs
.psw
).p
= sfr
->basic
.P
;
1002 psw_bits(regs
.psw
).as
= sfr
->basic
.AS
;
1005 * Use the hardware provided configuration level to decide if the
1006 * sample belongs to a guest or host. If that is not available,
1007 * fall back to the following heuristics:
1008 * A non-zero guest program parameter always indicates a guest
1009 * sample. Some early samples or samples from guests without
1010 * lpp usage would be misaccounted to the host. We use the asn
1011 * value as an addon heuristic to detect most of these guest samples.
1012 * If the value differs from the host hpp value, we assume to be a
1015 switch (sfr
->basic
.CL
) {
1016 case 1: /* logical partition */
1017 sde_regs
->in_guest
= 0;
1019 case 2: /* virtual machine */
1020 sde_regs
->in_guest
= 1;
1022 default: /* old machine, use heuristics */
1023 if (sfr
->basic
.gpp
||
1024 sfr
->basic
.prim_asn
!= (u16
)sfr
->basic
.hpp
)
1025 sde_regs
->in_guest
= 1;
1030 if (perf_exclude_event(event
, ®s
, sde_regs
))
1032 if (perf_event_overflow(event
, &data
, ®s
)) {
1034 event
->pmu
->stop(event
, 0);
1036 perf_event_update_userpage(event
);
1041 static void perf_event_count_update(struct perf_event
*event
, u64 count
)
1043 local64_add(count
, &event
->count
);
1046 static int sample_format_is_valid(struct hws_combined_entry
*sample
,
1049 if (likely(flags
& PERF_CPUM_SF_BASIC_MODE
))
1050 /* Only basic-sampling data entries with data-entry-format
1051 * version of 0x0001 can be processed.
1053 if (sample
->basic
.def
!= 0x0001)
1055 if (flags
& PERF_CPUM_SF_DIAG_MODE
)
1056 /* The data-entry-format number of diagnostic-sampling data
1057 * entries can vary. Because diagnostic data is just passed
1058 * through, do only a sanity check on the DEF.
1060 if (sample
->diag
.def
< 0x8001)
1065 static int sample_is_consistent(struct hws_combined_entry
*sample
,
1066 unsigned long flags
)
1068 /* This check applies only to basic-sampling data entries of potentially
1069 * combined-sampling data entries. Invalid entries cannot be processed
1070 * by the PMU and, thus, do not deliver an associated
1071 * diagnostic-sampling data entry.
1073 if (unlikely(!(flags
& PERF_CPUM_SF_BASIC_MODE
)))
1076 * Samples are skipped, if they are invalid or for which the
1077 * instruction address is not predictable, i.e., the wait-state bit is
1080 if (sample
->basic
.I
|| sample
->basic
.W
)
1085 static void reset_sample_slot(struct hws_combined_entry
*sample
,
1086 unsigned long flags
)
1088 if (likely(flags
& PERF_CPUM_SF_BASIC_MODE
))
1089 sample
->basic
.def
= 0;
1090 if (flags
& PERF_CPUM_SF_DIAG_MODE
)
1091 sample
->diag
.def
= 0;
1094 static void sfr_store_sample(struct sf_raw_sample
*sfr
,
1095 struct hws_combined_entry
*sample
)
1097 if (likely(sfr
->format
& PERF_CPUM_SF_BASIC_MODE
))
1098 sfr
->basic
= sample
->basic
;
1099 if (sfr
->format
& PERF_CPUM_SF_DIAG_MODE
)
1100 memcpy(&sfr
->diag
, &sample
->diag
, sfr
->dsdes
);
1103 static void debug_sample_entry(struct hws_combined_entry
*sample
,
1104 struct hws_trailer_entry
*te
,
1105 unsigned long flags
)
1107 debug_sprintf_event(sfdbg
, 4, "hw_collect_samples: Found unknown "
1108 "sampling data entry: te->f=%i basic.def=%04x (%p)"
1109 " diag.def=%04x (%p)\n", te
->f
,
1110 sample
->basic
.def
, &sample
->basic
,
1111 (flags
& PERF_CPUM_SF_DIAG_MODE
)
1112 ? sample
->diag
.def
: 0xFFFF,
1113 (flags
& PERF_CPUM_SF_DIAG_MODE
)
1114 ? &sample
->diag
: NULL
);
1117 /* hw_collect_samples() - Walk through a sample-data-block and collect samples
1118 * @event: The perf event
1119 * @sdbt: Sample-data-block table
1120 * @overflow: Event overflow counter
1122 * Walks through a sample-data-block and collects sampling data entries that are
1123 * then pushed to the perf event subsystem. Depending on the sampling function,
1124 * there can be either basic-sampling or combined-sampling data entries. A
1125 * combined-sampling data entry consists of a basic- and a diagnostic-sampling
1126 * data entry. The sampling function is determined by the flags in the perf
1127 * event hardware structure. The function always works with a combined-sampling
1128 * data entry but ignores the the diagnostic portion if it is not available.
1130 * Note that the implementation focuses on basic-sampling data entries and, if
1131 * such an entry is not valid, the entire combined-sampling data entry is
1134 * The overflow variables counts the number of samples that has been discarded
1135 * due to a perf event overflow.
1137 static void hw_collect_samples(struct perf_event
*event
, unsigned long *sdbt
,
1138 unsigned long long *overflow
)
1140 unsigned long flags
= SAMPL_FLAGS(&event
->hw
);
1141 struct hws_combined_entry
*sample
;
1142 struct hws_trailer_entry
*te
;
1143 struct sf_raw_sample
*sfr
;
1146 /* Prepare and initialize raw sample data */
1147 sfr
= (struct sf_raw_sample
*) RAWSAMPLE_REG(&event
->hw
);
1148 sfr
->format
= flags
& PERF_CPUM_SF_MODE_MASK
;
1150 sample_size
= event_sample_size(&event
->hw
);
1151 te
= (struct hws_trailer_entry
*) trailer_entry_ptr(*sdbt
);
1152 sample
= (struct hws_combined_entry
*) *sdbt
;
1153 while ((unsigned long *) sample
< (unsigned long *) te
) {
1154 /* Check for an empty sample */
1155 if (!sample
->basic
.def
)
1158 /* Update perf event period */
1159 perf_event_count_update(event
, SAMPL_RATE(&event
->hw
));
1161 /* Check sampling data entry */
1162 if (sample_format_is_valid(sample
, flags
)) {
1163 /* If an event overflow occurred, the PMU is stopped to
1164 * throttle event delivery. Remaining sample data is
1168 if (sample_is_consistent(sample
, flags
)) {
1169 /* Deliver sample data to perf */
1170 sfr_store_sample(sfr
, sample
);
1171 *overflow
= perf_push_sample(event
, sfr
);
1174 /* Count discarded samples */
1177 debug_sample_entry(sample
, te
, flags
);
1178 /* Sample slot is not yet written or other record.
1180 * This condition can occur if the buffer was reused
1181 * from a combined basic- and diagnostic-sampling.
1182 * If only basic-sampling is then active, entries are
1183 * written into the larger diagnostic entries.
1184 * This is typically the case for sample-data-blocks
1185 * that are not full. Stop processing if the first
1186 * invalid format was detected.
1192 /* Reset sample slot and advance to next sample */
1193 reset_sample_slot(sample
, flags
);
1194 sample
+= sample_size
;
1198 /* hw_perf_event_update() - Process sampling buffer
1199 * @event: The perf event
1200 * @flush_all: Flag to also flush partially filled sample-data-blocks
1202 * Processes the sampling buffer and create perf event samples.
1203 * The sampling buffer position are retrieved and saved in the TEAR_REG
1204 * register of the specified perf event.
1206 * Only full sample-data-blocks are processed. Specify the flash_all flag
1207 * to also walk through partially filled sample-data-blocks. It is ignored
1208 * if PERF_CPUM_SF_FULL_BLOCKS is set. The PERF_CPUM_SF_FULL_BLOCKS flag
1209 * enforces the processing of full sample-data-blocks only (trailer entries
1210 * with the block-full-indicator bit set).
1212 static void hw_perf_event_update(struct perf_event
*event
, int flush_all
)
1214 struct hw_perf_event
*hwc
= &event
->hw
;
1215 struct hws_trailer_entry
*te
;
1216 unsigned long *sdbt
;
1217 unsigned long long event_overflow
, sampl_overflow
, num_sdb
, te_flags
;
1220 if (flush_all
&& SDB_FULL_BLOCKS(hwc
))
1223 sdbt
= (unsigned long *) TEAR_REG(hwc
);
1224 done
= event_overflow
= sampl_overflow
= num_sdb
= 0;
1226 /* Get the trailer entry of the sample-data-block */
1227 te
= (struct hws_trailer_entry
*) trailer_entry_ptr(*sdbt
);
1229 /* Leave loop if no more work to do (block full indicator) */
1236 /* Check the sample overflow count */
1238 /* Account sample overflows and, if a particular limit
1239 * is reached, extend the sampling buffer.
1240 * For details, see sfb_account_overflows().
1242 sampl_overflow
+= te
->overflow
;
1244 /* Timestamps are valid for full sample-data-blocks only */
1245 debug_sprintf_event(sfdbg
, 6, "hw_perf_event_update: sdbt=%p "
1246 "overflow=%llu timestamp=0x%llx\n",
1248 (te
->f
) ? trailer_timestamp(te
) : 0ULL);
1250 /* Collect all samples from a single sample-data-block and
1251 * flag if an (perf) event overflow happened. If so, the PMU
1252 * is stopped and remaining samples will be discarded.
1254 hw_collect_samples(event
, sdbt
, &event_overflow
);
1257 /* Reset trailer (using compare-double-and-swap) */
1259 te_flags
= te
->flags
& ~SDB_TE_BUFFER_FULL_MASK
;
1260 te_flags
|= SDB_TE_ALERT_REQ_MASK
;
1261 } while (!cmpxchg_double(&te
->flags
, &te
->overflow
,
1262 te
->flags
, te
->overflow
,
1265 /* Advance to next sample-data-block */
1267 if (is_link_entry(sdbt
))
1268 sdbt
= get_next_sdbt(sdbt
);
1270 /* Update event hardware registers */
1271 TEAR_REG(hwc
) = (unsigned long) sdbt
;
1273 /* Stop processing sample-data if all samples of the current
1274 * sample-data-block were flushed even if it was not full.
1276 if (flush_all
&& done
)
1279 /* If an event overflow happened, discard samples by
1280 * processing any remaining sample-data-blocks.
1286 /* Account sample overflows in the event hardware structure */
1288 OVERFLOW_REG(hwc
) = DIV_ROUND_UP(OVERFLOW_REG(hwc
) +
1289 sampl_overflow
, 1 + num_sdb
);
1290 if (sampl_overflow
|| event_overflow
)
1291 debug_sprintf_event(sfdbg
, 4, "hw_perf_event_update: "
1292 "overflow stats: sample=%llu event=%llu\n",
1293 sampl_overflow
, event_overflow
);
1296 static void cpumsf_pmu_read(struct perf_event
*event
)
1298 /* Nothing to do ... updates are interrupt-driven */
1301 /* Activate sampling control.
1302 * Next call of pmu_enable() starts sampling.
1304 static void cpumsf_pmu_start(struct perf_event
*event
, int flags
)
1306 struct cpu_hw_sf
*cpuhw
= this_cpu_ptr(&cpu_hw_sf
);
1308 if (WARN_ON_ONCE(!(event
->hw
.state
& PERF_HES_STOPPED
)))
1311 if (flags
& PERF_EF_RELOAD
)
1312 WARN_ON_ONCE(!(event
->hw
.state
& PERF_HES_UPTODATE
));
1314 perf_pmu_disable(event
->pmu
);
1315 event
->hw
.state
= 0;
1316 cpuhw
->lsctl
.cs
= 1;
1317 if (SAMPL_DIAG_MODE(&event
->hw
))
1318 cpuhw
->lsctl
.cd
= 1;
1319 perf_pmu_enable(event
->pmu
);
1322 /* Deactivate sampling control.
1323 * Next call of pmu_enable() stops sampling.
1325 static void cpumsf_pmu_stop(struct perf_event
*event
, int flags
)
1327 struct cpu_hw_sf
*cpuhw
= this_cpu_ptr(&cpu_hw_sf
);
1329 if (event
->hw
.state
& PERF_HES_STOPPED
)
1332 perf_pmu_disable(event
->pmu
);
1333 cpuhw
->lsctl
.cs
= 0;
1334 cpuhw
->lsctl
.cd
= 0;
1335 event
->hw
.state
|= PERF_HES_STOPPED
;
1337 if ((flags
& PERF_EF_UPDATE
) && !(event
->hw
.state
& PERF_HES_UPTODATE
)) {
1338 hw_perf_event_update(event
, 1);
1339 event
->hw
.state
|= PERF_HES_UPTODATE
;
1341 perf_pmu_enable(event
->pmu
);
1344 static int cpumsf_pmu_add(struct perf_event
*event
, int flags
)
1346 struct cpu_hw_sf
*cpuhw
= this_cpu_ptr(&cpu_hw_sf
);
1349 if (cpuhw
->flags
& PMU_F_IN_USE
)
1352 if (!cpuhw
->sfb
.sdbt
)
1356 perf_pmu_disable(event
->pmu
);
1358 event
->hw
.state
= PERF_HES_UPTODATE
| PERF_HES_STOPPED
;
1360 /* Set up sampling controls. Always program the sampling register
1361 * using the SDB-table start. Reset TEAR_REG event hardware register
1362 * that is used by hw_perf_event_update() to store the sampling buffer
1363 * position after samples have been flushed.
1367 cpuhw
->lsctl
.tear
= (unsigned long) cpuhw
->sfb
.sdbt
;
1368 cpuhw
->lsctl
.dear
= *(unsigned long *) cpuhw
->sfb
.sdbt
;
1369 cpuhw
->lsctl
.interval
= SAMPL_RATE(&event
->hw
);
1370 hw_reset_registers(&event
->hw
, cpuhw
->sfb
.sdbt
);
1372 /* Ensure sampling functions are in the disabled state. If disabled,
1373 * switch on sampling enable control. */
1374 if (WARN_ON_ONCE(cpuhw
->lsctl
.es
== 1 || cpuhw
->lsctl
.ed
== 1)) {
1378 cpuhw
->lsctl
.es
= 1;
1379 if (SAMPL_DIAG_MODE(&event
->hw
))
1380 cpuhw
->lsctl
.ed
= 1;
1382 /* Set in_use flag and store event */
1383 cpuhw
->event
= event
;
1384 cpuhw
->flags
|= PMU_F_IN_USE
;
1386 if (flags
& PERF_EF_START
)
1387 cpumsf_pmu_start(event
, PERF_EF_RELOAD
);
1389 perf_event_update_userpage(event
);
1390 perf_pmu_enable(event
->pmu
);
1394 static void cpumsf_pmu_del(struct perf_event
*event
, int flags
)
1396 struct cpu_hw_sf
*cpuhw
= this_cpu_ptr(&cpu_hw_sf
);
1398 perf_pmu_disable(event
->pmu
);
1399 cpumsf_pmu_stop(event
, PERF_EF_UPDATE
);
1401 cpuhw
->lsctl
.es
= 0;
1402 cpuhw
->lsctl
.ed
= 0;
1403 cpuhw
->flags
&= ~PMU_F_IN_USE
;
1404 cpuhw
->event
= NULL
;
1406 perf_event_update_userpage(event
);
1407 perf_pmu_enable(event
->pmu
);
1410 CPUMF_EVENT_ATTR(SF
, SF_CYCLES_BASIC
, PERF_EVENT_CPUM_SF
);
1411 CPUMF_EVENT_ATTR(SF
, SF_CYCLES_BASIC_DIAG
, PERF_EVENT_CPUM_SF_DIAG
);
1413 static struct attribute
*cpumsf_pmu_events_attr
[] = {
1414 CPUMF_EVENT_PTR(SF
, SF_CYCLES_BASIC
),
1419 PMU_FORMAT_ATTR(event
, "config:0-63");
1421 static struct attribute
*cpumsf_pmu_format_attr
[] = {
1422 &format_attr_event
.attr
,
1426 static struct attribute_group cpumsf_pmu_events_group
= {
1428 .attrs
= cpumsf_pmu_events_attr
,
1430 static struct attribute_group cpumsf_pmu_format_group
= {
1432 .attrs
= cpumsf_pmu_format_attr
,
1434 static const struct attribute_group
*cpumsf_pmu_attr_groups
[] = {
1435 &cpumsf_pmu_events_group
,
1436 &cpumsf_pmu_format_group
,
1440 static struct pmu cpumf_sampling
= {
1441 .pmu_enable
= cpumsf_pmu_enable
,
1442 .pmu_disable
= cpumsf_pmu_disable
,
1444 .event_init
= cpumsf_pmu_event_init
,
1445 .add
= cpumsf_pmu_add
,
1446 .del
= cpumsf_pmu_del
,
1448 .start
= cpumsf_pmu_start
,
1449 .stop
= cpumsf_pmu_stop
,
1450 .read
= cpumsf_pmu_read
,
1452 .attr_groups
= cpumsf_pmu_attr_groups
,
1455 static void cpumf_measurement_alert(struct ext_code ext_code
,
1456 unsigned int alert
, unsigned long unused
)
1458 struct cpu_hw_sf
*cpuhw
;
1460 if (!(alert
& CPU_MF_INT_SF_MASK
))
1462 inc_irq_stat(IRQEXT_CMS
);
1463 cpuhw
= this_cpu_ptr(&cpu_hw_sf
);
1465 /* Measurement alerts are shared and might happen when the PMU
1466 * is not reserved. Ignore these alerts in this case. */
1467 if (!(cpuhw
->flags
& PMU_F_RESERVED
))
1470 /* The processing below must take care of multiple alert events that
1471 * might be indicated concurrently. */
1473 /* Program alert request */
1474 if (alert
& CPU_MF_INT_SF_PRA
) {
1475 if (cpuhw
->flags
& PMU_F_IN_USE
)
1476 hw_perf_event_update(cpuhw
->event
, 0);
1478 WARN_ON_ONCE(!(cpuhw
->flags
& PMU_F_IN_USE
));
1481 /* Report measurement alerts only for non-PRA codes */
1482 if (alert
!= CPU_MF_INT_SF_PRA
)
1483 debug_sprintf_event(sfdbg
, 6, "measurement alert: 0x%x\n", alert
);
1485 /* Sampling authorization change request */
1486 if (alert
& CPU_MF_INT_SF_SACA
)
1489 /* Loss of sample data due to high-priority machine activities */
1490 if (alert
& CPU_MF_INT_SF_LSDA
) {
1491 pr_err("Sample data was lost\n");
1492 cpuhw
->flags
|= PMU_F_ERR_LSDA
;
1496 /* Invalid sampling buffer entry */
1497 if (alert
& (CPU_MF_INT_SF_IAE
|CPU_MF_INT_SF_ISE
)) {
1498 pr_err("A sampling buffer entry is incorrect (alert=0x%x)\n",
1500 cpuhw
->flags
|= PMU_F_ERR_IBE
;
1504 static int cpusf_pmu_setup(unsigned int cpu
, int flags
)
1506 /* Ignore the notification if no events are scheduled on the PMU.
1507 * This might be racy...
1509 if (!atomic_read(&num_events
))
1512 local_irq_disable();
1513 setup_pmc_cpu(&flags
);
1518 static int s390_pmu_sf_online_cpu(unsigned int cpu
)
1520 return cpusf_pmu_setup(cpu
, PMC_INIT
);
1523 static int s390_pmu_sf_offline_cpu(unsigned int cpu
)
1525 return cpusf_pmu_setup(cpu
, PMC_RELEASE
);
1528 static int param_get_sfb_size(char *buffer
, const struct kernel_param
*kp
)
1530 if (!cpum_sf_avail())
1532 return sprintf(buffer
, "%lu,%lu", CPUM_SF_MIN_SDB
, CPUM_SF_MAX_SDB
);
1535 static int param_set_sfb_size(const char *val
, const struct kernel_param
*kp
)
1538 unsigned long min
, max
;
1540 if (!cpum_sf_avail())
1542 if (!val
|| !strlen(val
))
1545 /* Valid parameter values: "min,max" or "max" */
1546 min
= CPUM_SF_MIN_SDB
;
1547 max
= CPUM_SF_MAX_SDB
;
1548 if (strchr(val
, ','))
1549 rc
= (sscanf(val
, "%lu,%lu", &min
, &max
) == 2) ? 0 : -EINVAL
;
1551 rc
= kstrtoul(val
, 10, &max
);
1553 if (min
< 2 || min
>= max
|| max
> get_num_physpages())
1558 sfb_set_limits(min
, max
);
1559 pr_info("The sampling buffer limits have changed to: "
1560 "min=%lu max=%lu (diag=x%lu)\n",
1561 CPUM_SF_MIN_SDB
, CPUM_SF_MAX_SDB
, CPUM_SF_SDB_DIAG_FACTOR
);
1565 #define param_check_sfb_size(name, p) __param_check(name, p, void)
1566 static const struct kernel_param_ops param_ops_sfb_size
= {
1567 .set
= param_set_sfb_size
,
1568 .get
= param_get_sfb_size
,
1571 #define RS_INIT_FAILURE_QSI 0x0001
1572 #define RS_INIT_FAILURE_BSDES 0x0002
1573 #define RS_INIT_FAILURE_ALRT 0x0003
1574 #define RS_INIT_FAILURE_PERF 0x0004
1575 static void __init
pr_cpumsf_err(unsigned int reason
)
1577 pr_err("Sampling facility support for perf is not available: "
1578 "reason=%04x\n", reason
);
1581 static int __init
init_cpum_sampling_pmu(void)
1583 struct hws_qsi_info_block si
;
1586 if (!cpum_sf_avail())
1589 memset(&si
, 0, sizeof(si
));
1591 pr_cpumsf_err(RS_INIT_FAILURE_QSI
);
1595 if (si
.bsdes
!= sizeof(struct hws_basic_entry
)) {
1596 pr_cpumsf_err(RS_INIT_FAILURE_BSDES
);
1601 sfb_set_limits(CPUM_SF_MIN_SDB
, CPUM_SF_MAX_SDB
);
1602 cpumsf_pmu_events_attr
[1] =
1603 CPUMF_EVENT_PTR(SF
, SF_CYCLES_BASIC_DIAG
);
1606 sfdbg
= debug_register(KMSG_COMPONENT
, 2, 1, 80);
1608 pr_err("Registering for s390dbf failed\n");
1609 debug_register_view(sfdbg
, &debug_sprintf_view
);
1611 err
= register_external_irq(EXT_IRQ_MEASURE_ALERT
,
1612 cpumf_measurement_alert
);
1614 pr_cpumsf_err(RS_INIT_FAILURE_ALRT
);
1618 err
= perf_pmu_register(&cpumf_sampling
, "cpum_sf", PERF_TYPE_RAW
);
1620 pr_cpumsf_err(RS_INIT_FAILURE_PERF
);
1621 unregister_external_irq(EXT_IRQ_MEASURE_ALERT
,
1622 cpumf_measurement_alert
);
1626 cpuhp_setup_state(CPUHP_AP_PERF_S390_SF_ONLINE
, "perf/s390/sf:online",
1627 s390_pmu_sf_online_cpu
, s390_pmu_sf_offline_cpu
);
1631 arch_initcall(init_cpum_sampling_pmu
);
1632 core_param(cpum_sfb_size
, CPUM_SF_MAX_SDB
, sfb_size
, 0640);