ARM: mm: Recreate kernel mappings in early_paging_init()
[linux/fpc-iii.git] / drivers / net / wireless / ti / wl1251 / rx.h
blob4448f635a4d8e8462643ac820226b95b34ee623e
1 /*
2 * This file is part of wl1251
4 * Copyright (c) 1998-2007 Texas Instruments Incorporated
5 * Copyright (C) 2008 Nokia Corporation
7 * This program is free software; you can redistribute it and/or
8 * modify it under the terms of the GNU General Public License
9 * version 2 as published by the Free Software Foundation.
11 * This program is distributed in the hope that it will be useful, but
12 * WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
14 * General Public License for more details.
16 * You should have received a copy of the GNU General Public License
17 * along with this program; if not, write to the Free Software
18 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
19 * 02110-1301 USA
23 #ifndef __WL1251_RX_H__
24 #define __WL1251_RX_H__
26 #include <linux/bitops.h>
28 #include "wl1251.h"
31 * RX PATH
33 * The Rx path uses a double buffer and an rx_contro structure, each located
34 * at a fixed address in the device memory. The host keeps track of which
35 * buffer is available and alternates between them on a per packet basis.
36 * The size of each of the two buffers is large enough to hold the longest
37 * 802.3 packet.
38 * The RX path goes like that:
39 * 1) The target generates an interrupt each time a new packet is received.
40 * There are 2 RX interrupts, one for each buffer.
41 * 2) The host reads the received packet from one of the double buffers.
42 * 3) The host triggers a target interrupt.
43 * 4) The target prepares the next RX packet.
46 #define WL1251_RX_MAX_RSSI -30
47 #define WL1251_RX_MIN_RSSI -95
49 #define WL1251_RX_ALIGN_TO 4
50 #define WL1251_RX_ALIGN(len) (((len) + WL1251_RX_ALIGN_TO - 1) & \
51 ~(WL1251_RX_ALIGN_TO - 1))
53 #define SHORT_PREAMBLE_BIT BIT(0)
54 #define OFDM_RATE_BIT BIT(6)
55 #define PBCC_RATE_BIT BIT(7)
57 #define PLCP_HEADER_LENGTH 8
58 #define RX_DESC_PACKETID_SHIFT 11
59 #define RX_MAX_PACKET_ID 3
61 #define RX_DESC_VALID_FCS 0x0001
62 #define RX_DESC_MATCH_RXADDR1 0x0002
63 #define RX_DESC_MCAST 0x0004
64 #define RX_DESC_STAINTIM 0x0008
65 #define RX_DESC_VIRTUAL_BM 0x0010
66 #define RX_DESC_BCAST 0x0020
67 #define RX_DESC_MATCH_SSID 0x0040
68 #define RX_DESC_MATCH_BSSID 0x0080
69 #define RX_DESC_ENCRYPTION_MASK 0x0300
70 #define RX_DESC_MEASURMENT 0x0400
71 #define RX_DESC_SEQNUM_MASK 0x1800
72 #define RX_DESC_MIC_FAIL 0x2000
73 #define RX_DESC_DECRYPT_FAIL 0x4000
75 struct wl1251_rx_descriptor {
76 u32 timestamp; /* In microseconds */
77 u16 length; /* Paylod length, including headers */
78 u16 flags;
81 * 0 - 802.11
82 * 1 - 802.3
83 * 2 - IP
84 * 3 - Raw Codec
86 u8 type;
89 * Received Rate:
90 * 0x0A - 1MBPS
91 * 0x14 - 2MBPS
92 * 0x37 - 5_5MBPS
93 * 0x0B - 6MBPS
94 * 0x0F - 9MBPS
95 * 0x6E - 11MBPS
96 * 0x0A - 12MBPS
97 * 0x0E - 18MBPS
98 * 0xDC - 22MBPS
99 * 0x09 - 24MBPS
100 * 0x0D - 36MBPS
101 * 0x08 - 48MBPS
102 * 0x0C - 54MBPS
104 u8 rate;
106 u8 mod_pre; /* Modulation and preamble */
107 u8 channel;
110 * 0 - 2.4 Ghz
111 * 1 - 5 Ghz
113 u8 band;
115 s8 rssi; /* in dB */
116 u8 rcpi; /* in dB */
117 u8 snr; /* in dB */
118 } __packed;
120 void wl1251_rx(struct wl1251 *wl);
122 #endif