?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
esp_scsi: spellcheck 'driver'
[linux/fpc-iii.git] / drivers / mfd / twl6030-irq.c
blob2807e1a956632d1c0e7102aa1678707c04aba10d
1 /*
2 * twl6030-irq.c - TWL6030 irq support
3 *
4 * Copyright (C) 2005-2009 Texas Instruments, Inc.
5 *
6 * Modifications to defer interrupt handling to a kernel thread:
7 * Copyright (C) 2006 MontaVista Software, Inc.
8 *
9 * Based on tlv320aic23.c:
10 * Copyright (c) by Kai Svahn <kai.svahn@nokia.com>
11 *
12 * Code cleanup and modifications to IRQ handler.
13 * by syed khasim <x0khasim@ti.com>
14 *
15 * TWL6030 specific code and IRQ handling changes by
16 * Jagadeesh Bhaskar Pakaravoor <j-pakaravoor@ti.com>
17 * Balaji T K <balajitk@ti.com>
18 *
19 * This program is free software; you can redistribute it and/or modify
20 * it under the terms of the GNU General Public License as published by
21 * the Free Software Foundation; either version 2 of the License, or
22 * (at your option) any later version.
23 *
24 * This program is distributed in the hope that it will be useful,
25 * but WITHOUT ANY WARRANTY; without even the implied warranty of
26 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
27 * GNU General Public License for more details.
28 *
29 * You should have received a copy of the GNU General Public License
30 * along with this program; if not, write to the Free Software
31 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
32 */
33
34 #include <linux/export.h>
35 #include <linux/interrupt.h>
36 #include <linux/irq.h>
37 #include <linux/kthread.h>
38 #include <linux/i2c/twl.h>
39 #include <linux/platform_device.h>
40 #include <linux/suspend.h>
41 #include <linux/of.h>
42 #include <linux/irqdomain.h>
43 #include <linux/of_device.h>
44
45 #include "twl-core.h"
46
47 /*
48 * TWL6030 (unlike its predecessors, which had two level interrupt handling)
49 * three interrupt registers INT_STS_A, INT_STS_B and INT_STS_C.
50 * It exposes status bits saying who has raised an interrupt. There are
51 * three mask registers that corresponds to these status registers, that
52 * enables/disables these interrupts.
53 *
54 * We set up IRQs starting at a platform-specified base. An interrupt map table,
55 * specifies mapping between interrupt number and the associated module.
56 */
57 #define TWL6030_NR_IRQS 20
58
59 static int twl6030_interrupt_mapping[24] = {
60 PWR_INTR_OFFSET, /* Bit 0 PWRON */
61 PWR_INTR_OFFSET, /* Bit 1 RPWRON */
62 PWR_INTR_OFFSET, /* Bit 2 BAT_VLOW */
63 RTC_INTR_OFFSET, /* Bit 3 RTC_ALARM */
64 RTC_INTR_OFFSET, /* Bit 4 RTC_PERIOD */
65 HOTDIE_INTR_OFFSET, /* Bit 5 HOT_DIE */
66 SMPSLDO_INTR_OFFSET, /* Bit 6 VXXX_SHORT */
67 SMPSLDO_INTR_OFFSET, /* Bit 7 VMMC_SHORT */
68
69 SMPSLDO_INTR_OFFSET, /* Bit 8 VUSIM_SHORT */
70 BATDETECT_INTR_OFFSET, /* Bit 9 BAT */
71 SIMDETECT_INTR_OFFSET, /* Bit 10 SIM */
72 MMCDETECT_INTR_OFFSET, /* Bit 11 MMC */
73 RSV_INTR_OFFSET, /* Bit 12 Reserved */
74 MADC_INTR_OFFSET, /* Bit 13 GPADC_RT_EOC */
75 MADC_INTR_OFFSET, /* Bit 14 GPADC_SW_EOC */
76 GASGAUGE_INTR_OFFSET, /* Bit 15 CC_AUTOCAL */
77
78 USBOTG_INTR_OFFSET, /* Bit 16 ID_WKUP */
79 USBOTG_INTR_OFFSET, /* Bit 17 VBUS_WKUP */
80 USBOTG_INTR_OFFSET, /* Bit 18 ID */
81 USB_PRES_INTR_OFFSET, /* Bit 19 VBUS */
82 CHARGER_INTR_OFFSET, /* Bit 20 CHRG_CTRL */
83 CHARGERFAULT_INTR_OFFSET, /* Bit 21 EXT_CHRG */
84 CHARGERFAULT_INTR_OFFSET, /* Bit 22 INT_CHRG */
85 RSV_INTR_OFFSET, /* Bit 23 Reserved */
86 };
87
88 static int twl6032_interrupt_mapping[24] = {
89 PWR_INTR_OFFSET, /* Bit 0 PWRON */
90 PWR_INTR_OFFSET, /* Bit 1 RPWRON */
91 PWR_INTR_OFFSET, /* Bit 2 SYS_VLOW */
92 RTC_INTR_OFFSET, /* Bit 3 RTC_ALARM */
93 RTC_INTR_OFFSET, /* Bit 4 RTC_PERIOD */
94 HOTDIE_INTR_OFFSET, /* Bit 5 HOT_DIE */
95 SMPSLDO_INTR_OFFSET, /* Bit 6 VXXX_SHORT */
96 PWR_INTR_OFFSET, /* Bit 7 SPDURATION */
97
98 PWR_INTR_OFFSET, /* Bit 8 WATCHDOG */
99 BATDETECT_INTR_OFFSET, /* Bit 9 BAT */
100 SIMDETECT_INTR_OFFSET, /* Bit 10 SIM */
101 MMCDETECT_INTR_OFFSET, /* Bit 11 MMC */
102 MADC_INTR_OFFSET, /* Bit 12 GPADC_RT_EOC */
103 MADC_INTR_OFFSET, /* Bit 13 GPADC_SW_EOC */
104 GASGAUGE_INTR_OFFSET, /* Bit 14 CC_EOC */
105 GASGAUGE_INTR_OFFSET, /* Bit 15 CC_AUTOCAL */
106
107 USBOTG_INTR_OFFSET, /* Bit 16 ID_WKUP */
108 USBOTG_INTR_OFFSET, /* Bit 17 VBUS_WKUP */
109 USBOTG_INTR_OFFSET, /* Bit 18 ID */
110 USB_PRES_INTR_OFFSET, /* Bit 19 VBUS */
111 CHARGER_INTR_OFFSET, /* Bit 20 CHRG_CTRL */
112 CHARGERFAULT_INTR_OFFSET, /* Bit 21 EXT_CHRG */
113 CHARGERFAULT_INTR_OFFSET, /* Bit 22 INT_CHRG */
114 RSV_INTR_OFFSET, /* Bit 23 Reserved */
115 };
116
117 /*----------------------------------------------------------------------*/
118
119 struct twl6030_irq {
120 unsigned int irq_base;
121 int twl_irq;
122 bool irq_wake_enabled;
123 atomic_t wakeirqs;
124 struct notifier_block pm_nb;
125 struct irq_chip irq_chip;
126 struct irq_domain *irq_domain;
127 const int *irq_mapping_tbl;
128 };
129
130 static struct twl6030_irq *twl6030_irq;
131
132 static int twl6030_irq_pm_notifier(struct notifier_block *notifier,
133 unsigned long pm_event, void *unused)
134 {
135 int chained_wakeups;
136 struct twl6030_irq *pdata = container_of(notifier, struct twl6030_irq,
137 pm_nb);
138
139 switch (pm_event) {
140 case PM_SUSPEND_PREPARE:
141 chained_wakeups = atomic_read(&pdata->wakeirqs);
142
143 if (chained_wakeups && !pdata->irq_wake_enabled) {
144 if (enable_irq_wake(pdata->twl_irq))
145 pr_err("twl6030 IRQ wake enable failed\n");
146 else
147 pdata->irq_wake_enabled = true;
148 } else if (!chained_wakeups && pdata->irq_wake_enabled) {
149 disable_irq_wake(pdata->twl_irq);
150 pdata->irq_wake_enabled = false;
151 }
152
153 disable_irq(pdata->twl_irq);
154 break;
155
156 case PM_POST_SUSPEND:
157 enable_irq(pdata->twl_irq);
158 break;
159
160 default:
161 break;
162 }
163
164 return NOTIFY_DONE;
165 }
166
167 /*
168 * Threaded irq handler for the twl6030 interrupt.
169 * We query the interrupt controller in the twl6030 to determine
170 * which module is generating the interrupt request and call
171 * handle_nested_irq for that module.
172 */
173 static irqreturn_t twl6030_irq_thread(int irq, void *data)
174 {
175 int i, ret;
176 union {
177 u8 bytes[4];
178 __le32 int_sts;
179 } sts;
180 u32 int_sts; /* sts.int_sts converted to CPU endianness */
181 struct twl6030_irq *pdata = data;
182
183 /* read INT_STS_A, B and C in one shot using a burst read */
184 ret = twl_i2c_read(TWL_MODULE_PIH, sts.bytes, REG_INT_STS_A, 3);
185 if (ret) {
186 pr_warn("twl6030_irq: I2C error %d reading PIH ISR\n", ret);
187 return IRQ_HANDLED;
188 }
189
190 sts.bytes[3] = 0; /* Only 24 bits are valid*/
191
192 /*
193 * Since VBUS status bit is not reliable for VBUS disconnect
194 * use CHARGER VBUS detection status bit instead.
195 */
196 if (sts.bytes[2] & 0x10)
197 sts.bytes[2] |= 0x08;
198
199 int_sts = le32_to_cpu(sts.int_sts);
200 for (i = 0; int_sts; int_sts >>= 1, i++)
201 if (int_sts & 0x1) {
202 int module_irq =
203 irq_find_mapping(pdata->irq_domain,
204 pdata->irq_mapping_tbl[i]);
205 if (module_irq)
206 handle_nested_irq(module_irq);
207 else
208 pr_err("twl6030_irq: Unmapped PIH ISR %u detected\n",
209 i);
210 pr_debug("twl6030_irq: PIH ISR %u, virq%u\n",
211 i, module_irq);
212 }
213
214 /*
215 * NOTE:
216 * Simulation confirms that documentation is wrong w.r.t the
217 * interrupt status clear operation. A single *byte* write to
218 * any one of STS_A to STS_C register results in all three
219 * STS registers being reset. Since it does not matter which
220 * value is written, all three registers are cleared on a
221 * single byte write, so we just use 0x0 to clear.
222 */
223 ret = twl_i2c_write_u8(TWL_MODULE_PIH, 0x00, REG_INT_STS_A);
224 if (ret)
225 pr_warn("twl6030_irq: I2C error in clearing PIH ISR\n");
226
227 return IRQ_HANDLED;
228 }
229
230 /*----------------------------------------------------------------------*/
231
232 static int twl6030_irq_set_wake(struct irq_data *d, unsigned int on)
233 {
234 struct twl6030_irq *pdata = irq_get_chip_data(d->irq);
235
236 if (on)
237 atomic_inc(&pdata->wakeirqs);
238 else
239 atomic_dec(&pdata->wakeirqs);
240
241 return 0;
242 }
243
244 int twl6030_interrupt_unmask(u8 bit_mask, u8 offset)
245 {
246 int ret;
247 u8 unmask_value;
248
249 ret = twl_i2c_read_u8(TWL_MODULE_PIH, &unmask_value,
250 REG_INT_STS_A + offset);
251 unmask_value &= (~(bit_mask));
252 ret |= twl_i2c_write_u8(TWL_MODULE_PIH, unmask_value,
253 REG_INT_STS_A + offset); /* unmask INT_MSK_A/B/C */
254 return ret;
255 }
256 EXPORT_SYMBOL(twl6030_interrupt_unmask);
257
258 int twl6030_interrupt_mask(u8 bit_mask, u8 offset)
259 {
260 int ret;
261 u8 mask_value;
262
263 ret = twl_i2c_read_u8(TWL_MODULE_PIH, &mask_value,
264 REG_INT_STS_A + offset);
265 mask_value |= (bit_mask);
266 ret |= twl_i2c_write_u8(TWL_MODULE_PIH, mask_value,
267 REG_INT_STS_A + offset); /* mask INT_MSK_A/B/C */
268 return ret;
269 }
270 EXPORT_SYMBOL(twl6030_interrupt_mask);
271
272 int twl6030_mmc_card_detect_config(void)
273 {
274 int ret;
275 u8 reg_val = 0;
276
277 /* Unmasking the Card detect Interrupt line for MMC1 from Phoenix */
278 twl6030_interrupt_unmask(TWL6030_MMCDETECT_INT_MASK,
279 REG_INT_MSK_LINE_B);
280 twl6030_interrupt_unmask(TWL6030_MMCDETECT_INT_MASK,
281 REG_INT_MSK_STS_B);
282 /*
283 * Initially Configuring MMC_CTRL for receiving interrupts &
284 * Card status on TWL6030 for MMC1
285 */
286 ret = twl_i2c_read_u8(TWL6030_MODULE_ID0, &reg_val, TWL6030_MMCCTRL);
287 if (ret < 0) {
288 pr_err("twl6030: Failed to read MMCCTRL, error %d\n", ret);
289 return ret;
290 }
291 reg_val &= ~VMMC_AUTO_OFF;
292 reg_val |= SW_FC;
293 ret = twl_i2c_write_u8(TWL6030_MODULE_ID0, reg_val, TWL6030_MMCCTRL);
294 if (ret < 0) {
295 pr_err("twl6030: Failed to write MMCCTRL, error %d\n", ret);
296 return ret;
297 }
298
299 /* Configuring PullUp-PullDown register */
300 ret = twl_i2c_read_u8(TWL6030_MODULE_ID0, &reg_val,
301 TWL6030_CFG_INPUT_PUPD3);
302 if (ret < 0) {
303 pr_err("twl6030: Failed to read CFG_INPUT_PUPD3, error %d\n",
304 ret);
305 return ret;
306 }
307 reg_val &= ~(MMC_PU | MMC_PD);
308 ret = twl_i2c_write_u8(TWL6030_MODULE_ID0, reg_val,
309 TWL6030_CFG_INPUT_PUPD3);
310 if (ret < 0) {
311 pr_err("twl6030: Failed to write CFG_INPUT_PUPD3, error %d\n",
312 ret);
313 return ret;
314 }
315
316 return irq_find_mapping(twl6030_irq->irq_domain,
317 MMCDETECT_INTR_OFFSET);
318 }
319 EXPORT_SYMBOL(twl6030_mmc_card_detect_config);
320
321 int twl6030_mmc_card_detect(struct device *dev, int slot)
322 {
323 int ret = -EIO;
324 u8 read_reg = 0;
325 struct platform_device *pdev = to_platform_device(dev);
326
327 if (pdev->id) {
328 /* TWL6030 provide's Card detect support for
329 * only MMC1 controller.
330 */
331 pr_err("Unknown MMC controller %d in %s\n", pdev->id, __func__);
332 return ret;
333 }
334 /*
335 * BIT0 of MMC_CTRL on TWL6030 provides card status for MMC1
336 * 0 - Card not present ,1 - Card present
337 */
338 ret = twl_i2c_read_u8(TWL6030_MODULE_ID0, &read_reg,
339 TWL6030_MMCCTRL);
340 if (ret >= 0)
341 ret = read_reg & STS_MMC;
342 return ret;
343 }
344 EXPORT_SYMBOL(twl6030_mmc_card_detect);
345
346 static int twl6030_irq_map(struct irq_domain *d, unsigned int virq,
347 irq_hw_number_t hwirq)
348 {
349 struct twl6030_irq *pdata = d->host_data;
350
351 irq_set_chip_data(virq, pdata);
352 irq_set_chip_and_handler(virq, &pdata->irq_chip, handle_simple_irq);
353 irq_set_nested_thread(virq, true);
354 irq_set_parent(virq, pdata->twl_irq);
355
356 #ifdef CONFIG_ARM
357 /*
358 * ARM requires an extra step to clear IRQ_NOREQUEST, which it
359 * sets on behalf of every irq_chip. Also sets IRQ_NOPROBE.
360 */
361 set_irq_flags(virq, IRQF_VALID);
362 #else
363 /* same effect on other architectures */
364 irq_set_noprobe(virq);
365 #endif
366
367 return 0;
368 }
369
370 static void twl6030_irq_unmap(struct irq_domain *d, unsigned int virq)
371 {
372 #ifdef CONFIG_ARM
373 set_irq_flags(virq, 0);
374 #endif
375 irq_set_chip_and_handler(virq, NULL, NULL);
376 irq_set_chip_data(virq, NULL);
377 }
378
379 static struct irq_domain_ops twl6030_irq_domain_ops = {
380 .map = twl6030_irq_map,
381 .unmap = twl6030_irq_unmap,
382 .xlate = irq_domain_xlate_onetwocell,
383 };
384
385 static const struct of_device_id twl6030_of_match[] = {
386 {.compatible = "ti,twl6030", &twl6030_interrupt_mapping},
387 {.compatible = "ti,twl6032", &twl6032_interrupt_mapping},
388 { },
389 };
390
391 int twl6030_init_irq(struct device *dev, int irq_num)
392 {
393 struct device_node *node = dev->of_node;
394 int nr_irqs;
395 int status;
396 u8 mask[3];
397 const struct of_device_id *of_id;
398
399 of_id = of_match_device(twl6030_of_match, dev);
400 if (!of_id || !of_id->data) {
401 dev_err(dev, "Unknown TWL device model\n");
402 return -EINVAL;
403 }
404
405 nr_irqs = TWL6030_NR_IRQS;
406
407 twl6030_irq = devm_kzalloc(dev, sizeof(*twl6030_irq), GFP_KERNEL);
408 if (!twl6030_irq) {
409 dev_err(dev, "twl6030_irq: Memory allocation failed\n");
410 return -ENOMEM;
411 }
412
413 mask[0] = 0xFF;
414 mask[1] = 0xFF;
415 mask[2] = 0xFF;
416
417 /* mask all int lines */
418 status = twl_i2c_write(TWL_MODULE_PIH, &mask[0], REG_INT_MSK_LINE_A, 3);
419 /* mask all int sts */
420 status |= twl_i2c_write(TWL_MODULE_PIH, &mask[0], REG_INT_MSK_STS_A, 3);
421 /* clear INT_STS_A,B,C */
422 status |= twl_i2c_write(TWL_MODULE_PIH, &mask[0], REG_INT_STS_A, 3);
423
424 if (status < 0) {
425 dev_err(dev, "I2C err writing TWL_MODULE_PIH: %d\n", status);
426 return status;
427 }
428
429 /*
430 * install an irq handler for each of the modules;
431 * clone dummy irq_chip since PIH can't *do* anything
432 */
433 twl6030_irq->irq_chip = dummy_irq_chip;
434 twl6030_irq->irq_chip.name = "twl6030";
435 twl6030_irq->irq_chip.irq_set_type = NULL;
436 twl6030_irq->irq_chip.irq_set_wake = twl6030_irq_set_wake;
437
438 twl6030_irq->pm_nb.notifier_call = twl6030_irq_pm_notifier;
439 atomic_set(&twl6030_irq->wakeirqs, 0);
440 twl6030_irq->irq_mapping_tbl = of_id->data;
441
442 twl6030_irq->irq_domain =
443 irq_domain_add_linear(node, nr_irqs,
444 &twl6030_irq_domain_ops, twl6030_irq);
445 if (!twl6030_irq->irq_domain) {
446 dev_err(dev, "Can't add irq_domain\n");
447 return -ENOMEM;
448 }
449
450 dev_info(dev, "PIH (irq %d) nested IRQs\n", irq_num);
451
452 /* install an irq handler to demultiplex the TWL6030 interrupt */
453 status = request_threaded_irq(irq_num, NULL, twl6030_irq_thread,
454 IRQF_ONESHOT, "TWL6030-PIH", twl6030_irq);
455 if (status < 0) {
456 dev_err(dev, "could not claim irq %d: %d\n", irq_num, status);
457 goto fail_irq;
458 }
459
460 twl6030_irq->twl_irq = irq_num;
461 register_pm_notifier(&twl6030_irq->pm_nb);
462 return 0;
463
464 fail_irq:
465 irq_domain_remove(twl6030_irq->irq_domain);
466 return status;
467 }
468
469 int twl6030_exit_irq(void)
470 {
471 if (twl6030_irq && twl6030_irq->twl_irq) {
472 unregister_pm_notifier(&twl6030_irq->pm_nb);
473 free_irq(twl6030_irq->twl_irq, NULL);
474 /*
475 * TODO: IRQ domain and allocated nested IRQ descriptors
476 * should be freed somehow here. Now It can't be done, because
477 * child devices will not be deleted during removing of
478 * TWL Core driver and they will still contain allocated
479 * virt IRQs in their Resources tables.
480 * The same prevents us from using devm_request_threaded_irq()
481 * in this module.
482 */
483 }
484 return 0;
485 }
486
Linux with added FPC-III support