arch/arm/boot/dts/am335x-evmsk.dts

   1 /*
   2  * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
   3  *
   4  * This program is free software; you can redistribute it and/or modify
   5  * it under the terms of the GNU General Public License version 2 as
   6  * published by the Free Software Foundation.
   7  */
   8
   9 /*
  10  * AM335x Starter Kit
  11  * http://www.ti.com/tool/tmdssk3358
  12  */
  13
  14 /dts-v1/;
  15
  16 #include "am33xx.dtsi"
  17 #include <dt-bindings/pwm/pwm.h>
  18 #include <dt-bindings/interrupt-controller/irq.h>
  19
  20 / {
  21         model = "TI AM335x EVM-SK";
  22         compatible = "ti,am335x-evmsk", "ti,am33xx";
  23
  24         cpus {
  25                 cpu@0 {
  26                         cpu0-supply = <&vdd1_reg>;
  27                 };
  28         };
  29
  30         memory {
  31                 device_type = "memory";
  32                 reg = <0x80000000 0x10000000>; /* 256 MB */
  33         };
  34
  35         vbat: fixedregulator@0 {
  36                 compatible = "regulator-fixed";
  37                 regulator-name = "vbat";
  38                 regulator-min-microvolt = <5000000>;
  39                 regulator-max-microvolt = <5000000>;
  40                 regulator-boot-on;
  41         };
  42
  43         lis3_reg: fixedregulator@1 {
  44                 compatible = "regulator-fixed";
  45                 regulator-name = "lis3_reg";
  46                 regulator-boot-on;
  47         };
  48
  49         wl12xx_vmmc: fixedregulator@2 {
  50                 pinctrl-names = "default";
  51                 pinctrl-0 = <&wl12xx_gpio>;
  52                 compatible = "regulator-fixed";
  53                 regulator-name = "vwl1271";
  54                 regulator-min-microvolt = <1800000>;
  55                 regulator-max-microvolt = <1800000>;
  56                 gpio = <&gpio1 29 0>;
  57                 startup-delay-us = <70000>;
  58                 enable-active-high;
  59         };
  60
  61         vtt_fixed: fixedregulator@3 {
  62                 compatible = "regulator-fixed";
  63                 regulator-name = "vtt";
  64                 regulator-min-microvolt = <1500000>;
  65                 regulator-max-microvolt = <1500000>;
  66                 gpio = <&gpio0 7 GPIO_ACTIVE_HIGH>;
  67                 regulator-always-on;
  68                 regulator-boot-on;
  69                 enable-active-high;
  70         };
  71
  72         leds {
  73                 pinctrl-names = "default";
  74                 pinctrl-0 = <&user_leds_s0>;
  75
  76                 compatible = "gpio-leds";
  77
  78                 led@1 {
  79                         label = "evmsk:green:usr0";
  80                         gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
  81                         default-state = "off";
  82                 };
  83
  84                 led@2 {
  85                         label = "evmsk:green:usr1";
  86                         gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
  87                         default-state = "off";
  88                 };
  89
  90                 led@3 {
  91                         label = "evmsk:green:mmc0";
  92                         gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
  93                         linux,default-trigger = "mmc0";
  94                         default-state = "off";
  95                 };
  96
  97                 led@4 {
  98                         label = "evmsk:green:heartbeat";
  99                         gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
 100                         linux,default-trigger = "heartbeat";
 101                         default-state = "off";
 102                 };
 103         };
 104
 105         gpio_buttons: gpio_buttons@0 {
 106                 compatible = "gpio-keys";
 107                 #address-cells = <1>;
 108                 #size-cells = <0>;
 109
 110                 switch@1 {
 111                         label = "button0";
 112                         linux,code = <0x100>;
 113                         gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
 114                 };
 115
 116                 switch@2 {
 117                         label = "button1";
 118                         linux,code = <0x101>;
 119                         gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
 120                 };
 121
 122                 switch@3 {
 123                         label = "button2";
 124                         linux,code = <0x102>;
 125                         gpios = <&gpio0 30 GPIO_ACTIVE_HIGH>;
 126                         gpio-key,wakeup;
 127                 };
 128
 129                 switch@4 {
 130                         label = "button3";
 131                         linux,code = <0x103>;
 132                         gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>;
 133                 };
 134         };
 135
 136         backlight {
 137                 compatible = "pwm-backlight";
 138                 pwms = <&ecap2 0 50000 PWM_POLARITY_INVERTED>;
 139                 brightness-levels = <0 58 61 66 75 90 125 170 255>;
 140                 default-brightness-level = <8>;
 141         };
 142
 143         sound {
 144                 compatible = "simple-audio-card";
 145                 simple-audio-card,name = "AM335x-EVMSK";
 146                 simple-audio-card,widgets =
 147                         "Headphone", "Headphone Jack";
 148                 simple-audio-card,routing =
 149                         "Headphone Jack",       "HPLOUT",
 150                         "Headphone Jack",       "HPROUT";
 151                 simple-audio-card,format = "dsp_b";
 152                 simple-audio-card,bitclock-master = <&sound_master>;
 153                 simple-audio-card,frame-master = <&sound_master>;
 154                 simple-audio-card,bitclock-inversion;
 155
 156                 simple-audio-card,cpu {
 157                         sound-dai = <&mcasp1>;
 158                 };
 159
 160                 sound_master: simple-audio-card,codec {
 161                         sound-dai = <&tlv320aic3106>;
 162                         system-clock-frequency = <24000000>;
 163                 };
 164         };
 165
 166         panel {
 167                 compatible = "ti,tilcdc,panel";
 168                 pinctrl-names = "default", "sleep";
 169                 pinctrl-0 = <&lcd_pins_default>;
 170                 pinctrl-1 = <&lcd_pins_sleep>;
 171                 status = "okay";
 172                 panel-info {
 173                         ac-bias           = <255>;
 174                         ac-bias-intrpt    = <0>;
 175                         dma-burst-sz      = <16>;
 176                         bpp               = <32>;
 177                         fdd               = <0x80>;
 178                         sync-edge         = <0>;
 179                         sync-ctrl         = <1>;
 180                         raster-order      = <0>;
 181                         fifo-th           = <0>;
 182                 };
 183                 display-timings {
 184                         480x272 {
 185                                 hactive         = <480>;
 186                                 vactive         = <272>;
 187                                 hback-porch     = <43>;
 188                                 hfront-porch    = <8>;
 189                                 hsync-len       = <4>;
 190                                 vback-porch     = <12>;
 191                                 vfront-porch    = <4>;
 192                                 vsync-len       = <10>;
 193                                 clock-frequency = <9000000>;
 194                                 hsync-active    = <0>;
 195                                 vsync-active    = <0>;
 196                         };
 197                 };
 198         };
 199 };
 200
 201 &am33xx_pinmux {
 202         pinctrl-names = "default";
 203         pinctrl-0 = <&gpio_keys_s0 &clkout2_pin>;
 204
 205         lcd_pins_default: lcd_pins_default {
 206                 pinctrl-single,pins = <
 207                         0x20 (PIN_OUTPUT | MUX_MODE1)   /* gpmc_ad8.lcd_data23 */
 208                         0x24 (PIN_OUTPUT | MUX_MODE1)   /* gpmc_ad9.lcd_data22 */
 209                         0x28 (PIN_OUTPUT | MUX_MODE1)   /* gpmc_ad10.lcd_data21 */
 210                         0x2c (PIN_OUTPUT | MUX_MODE1)   /* gpmc_ad11.lcd_data20 */
 211                         0x30 (PIN_OUTPUT | MUX_MODE1)   /* gpmc_ad12.lcd_data19 */
 212                         0x34 (PIN_OUTPUT | MUX_MODE1)   /* gpmc_ad13.lcd_data18 */
 213                         0x38 (PIN_OUTPUT | MUX_MODE1)   /* gpmc_ad14.lcd_data17 */
 214                         0x3c (PIN_OUTPUT | MUX_MODE1)   /* gpmc_ad15.lcd_data16 */
 215                         0xa0 (PIN_OUTPUT | MUX_MODE0)   /* lcd_data0.lcd_data0 */
 216                         0xa4 (PIN_OUTPUT | MUX_MODE0)   /* lcd_data1.lcd_data1 */
 217                         0xa8 (PIN_OUTPUT | MUX_MODE0)   /* lcd_data2.lcd_data2 */
 218                         0xac (PIN_OUTPUT | MUX_MODE0)   /* lcd_data3.lcd_data3 */
 219                         0xb0 (PIN_OUTPUT | MUX_MODE0)   /* lcd_data4.lcd_data4 */
 220                         0xb4 (PIN_OUTPUT | MUX_MODE0)   /* lcd_data5.lcd_data5 */
 221                         0xb8 (PIN_OUTPUT | MUX_MODE0)   /* lcd_data6.lcd_data6 */
 222                         0xbc (PIN_OUTPUT | MUX_MODE0)   /* lcd_data7.lcd_data7 */
 223                         0xc0 (PIN_OUTPUT | MUX_MODE0)   /* lcd_data8.lcd_data8 */
 224                         0xc4 (PIN_OUTPUT | MUX_MODE0)   /* lcd_data9.lcd_data9 */
 225                         0xc8 (PIN_OUTPUT | MUX_MODE0)   /* lcd_data10.lcd_data10 */
 226                         0xcc (PIN_OUTPUT | MUX_MODE0)   /* lcd_data11.lcd_data11 */
 227                         0xd0 (PIN_OUTPUT | MUX_MODE0)   /* lcd_data12.lcd_data12 */
 228                         0xd4 (PIN_OUTPUT | MUX_MODE0)   /* lcd_data13.lcd_data13 */
 229                         0xd8 (PIN_OUTPUT | MUX_MODE0)   /* lcd_data14.lcd_data14 */
 230                         0xdc (PIN_OUTPUT | MUX_MODE0)   /* lcd_data15.lcd_data15 */
 231                         0xe0 (PIN_OUTPUT | MUX_MODE0)   /* lcd_vsync.lcd_vsync */
 232                         0xe4 (PIN_OUTPUT | MUX_MODE0)   /* lcd_hsync.lcd_hsync */
 233                         0xe8 (PIN_OUTPUT | MUX_MODE0)   /* lcd_pclk.lcd_pclk */
 234                         0xec (PIN_OUTPUT | MUX_MODE0)   /* lcd_ac_bias_en.lcd_ac_bias_en */
 235                 >;
 236         };
 237
 238         lcd_pins_sleep: lcd_pins_sleep {
 239                 pinctrl-single,pins = <
 240                         0x20 (PIN_INPUT_PULLDOWN | MUX_MODE7)   /* gpmc_ad8.lcd_data23 */
 241                         0x24 (PIN_INPUT_PULLDOWN | MUX_MODE7)   /* gpmc_ad9.lcd_data22 */
 242                         0x28 (PIN_INPUT_PULLDOWN | MUX_MODE7)   /* gpmc_ad10.lcd_data21 */
 243                         0x2c (PIN_INPUT_PULLDOWN | MUX_MODE7)   /* gpmc_ad11.lcd_data20 */
 244                         0x30 (PIN_INPUT_PULLDOWN | MUX_MODE7)   /* gpmc_ad12.lcd_data19 */
 245                         0x34 (PIN_INPUT_PULLDOWN | MUX_MODE7)   /* gpmc_ad13.lcd_data18 */
 246                         0x38 (PIN_INPUT_PULLDOWN | MUX_MODE7)   /* gpmc_ad14.lcd_data17 */
 247                         0x3c (PIN_INPUT_PULLDOWN | MUX_MODE7)   /* gpmc_ad15.lcd_data16 */
 248                         0xa0 (PULL_DISABLE | MUX_MODE7) /* lcd_data0.lcd_data0 */
 249                         0xa4 (PULL_DISABLE | MUX_MODE7) /* lcd_data1.lcd_data1 */
 250                         0xa8 (PULL_DISABLE | MUX_MODE7) /* lcd_data2.lcd_data2 */
 251                         0xac (PULL_DISABLE | MUX_MODE7) /* lcd_data3.lcd_data3 */
 252                         0xb0 (PULL_DISABLE | MUX_MODE7) /* lcd_data4.lcd_data4 */
 253                         0xb4 (PULL_DISABLE | MUX_MODE7) /* lcd_data5.lcd_data5 */
 254                         0xb8 (PULL_DISABLE | MUX_MODE7) /* lcd_data6.lcd_data6 */
 255                         0xbc (PULL_DISABLE | MUX_MODE7) /* lcd_data7.lcd_data7 */
 256                         0xc0 (PULL_DISABLE | MUX_MODE7) /* lcd_data8.lcd_data8 */
 257                         0xc4 (PULL_DISABLE | MUX_MODE7) /* lcd_data9.lcd_data9 */
 258                         0xc8 (PULL_DISABLE | MUX_MODE7) /* lcd_data10.lcd_data10 */
 259                         0xcc (PULL_DISABLE | MUX_MODE7) /* lcd_data11.lcd_data11 */
 260                         0xd0 (PULL_DISABLE | MUX_MODE7) /* lcd_data12.lcd_data12 */
 261                         0xd4 (PULL_DISABLE | MUX_MODE7) /* lcd_data13.lcd_data13 */
 262                         0xd8 (PULL_DISABLE | MUX_MODE7) /* lcd_data14.lcd_data14 */
 263                         0xdc (PULL_DISABLE | MUX_MODE7) /* lcd_data15.lcd_data15 */
 264                         0xe0 (PIN_INPUT_PULLDOWN | MUX_MODE7)   /* lcd_vsync.lcd_vsync */
 265                         0xe4 (PIN_INPUT_PULLDOWN | MUX_MODE7)   /* lcd_hsync.lcd_hsync */
 266                         0xe8 (PIN_INPUT_PULLDOWN | MUX_MODE7)   /* lcd_pclk.lcd_pclk */
 267                         0xec (PIN_INPUT_PULLDOWN | MUX_MODE7)   /* lcd_ac_bias_en.lcd_ac_bias_en */
 268                 >;
 269         };
 270
 271
 272         user_leds_s0: user_leds_s0 {
 273                 pinctrl-single,pins = <
 274                         0x10 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)  /* gpmc_ad4.gpio1_4 */
 275                         0x14 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)  /* gpmc_ad5.gpio1_5 */
 276                         0x18 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)  /* gpmc_ad6.gpio1_6 */
 277                         0x1c (PIN_OUTPUT_PULLDOWN | MUX_MODE7)  /* gpmc_ad7.gpio1_7 */
 278                 >;
 279         };
 280
 281         gpio_keys_s0: gpio_keys_s0 {
 282                 pinctrl-single,pins = <
 283                         0x94 (PIN_INPUT_PULLDOWN | MUX_MODE7)   /* gpmc_oen_ren.gpio2_3 */
 284                         0x90 (PIN_INPUT_PULLDOWN | MUX_MODE7)   /* gpmc_advn_ale.gpio2_2 */
 285                         0x70 (PIN_INPUT_PULLDOWN | MUX_MODE7)   /* gpmc_wait0.gpio0_30 */
 286                         0x9c (PIN_INPUT_PULLDOWN | MUX_MODE7)   /* gpmc_ben0_cle.gpio2_5 */
 287                 >;
 288         };
 289
 290         i2c0_pins: pinmux_i2c0_pins {
 291                 pinctrl-single,pins = <
 292                         0x188 (PIN_INPUT_PULLUP | MUX_MODE0)    /* i2c0_sda.i2c0_sda */
 293                         0x18c (PIN_INPUT_PULLUP | MUX_MODE0)    /* i2c0_scl.i2c0_scl */
 294                 >;
 295         };
 296
 297         uart0_pins: pinmux_uart0_pins {
 298                 pinctrl-single,pins = <
 299                         0x170 (PIN_INPUT_PULLUP | MUX_MODE0)    /* uart0_rxd.uart0_rxd */
 300                         0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)         /* uart0_txd.uart0_txd */
 301                 >;
 302         };
 303
 304         clkout2_pin: pinmux_clkout2_pin {
 305                 pinctrl-single,pins = <
 306                         0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3)         /* xdma_event_intr1.clkout2 */
 307                 >;
 308         };
 309
 310         ecap2_pins: backlight_pins {
 311                 pinctrl-single,pins = <
 312                         0x19c 0x4       /* mcasp0_ahclkr.ecap2_in_pwm2_out MODE4 */
 313                 >;
 314         };
 315
 316         cpsw_default: cpsw_default {
 317                 pinctrl-single,pins = <
 318                         /* Slave 1 */
 319                         0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txen.rgmii1_tctl */
 320                         0x118 (PIN_INPUT_PULLDOWN | MUX_MODE2)  /* mii1_rxdv.rgmii1_rctl */
 321                         0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd3.rgmii1_td3 */
 322                         0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd2.rgmii1_td2 */
 323                         0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_td1 */
 324                         0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_td0 */
 325                         0x12c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txclk.rgmii1_tclk */
 326                         0x130 (PIN_INPUT_PULLDOWN | MUX_MODE2)  /* mii1_rxclk.rgmii1_rclk */
 327                         0x134 (PIN_INPUT_PULLDOWN | MUX_MODE2)  /* mii1_rxd3.rgmii1_rd3 */
 328                         0x138 (PIN_INPUT_PULLDOWN | MUX_MODE2)  /* mii1_rxd2.rgmii1_rd2 */
 329                         0x13c (PIN_INPUT_PULLDOWN | MUX_MODE2)  /* mii1_rxd1.rgmii1_rd1 */
 330                         0x140 (PIN_INPUT_PULLDOWN | MUX_MODE2)  /* mii1_rxd0.rgmii1_rd0 */
 331
 332                         /* Slave 2 */
 333                         0x40 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)  /* gpmc_a0.rgmii2_tctl */
 334                         0x44 (PIN_INPUT_PULLDOWN | MUX_MODE2)   /* gpmc_a1.rgmii2_rctl */
 335                         0x48 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)  /* gpmc_a2.rgmii2_td3 */
 336                         0x4c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)  /* gpmc_a3.rgmii2_td2 */
 337                         0x50 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)  /* gpmc_a4.rgmii2_td1 */
 338                         0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)  /* gpmc_a5.rgmii2_td0 */
 339                         0x58 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)  /* gpmc_a6.rgmii2_tclk */
 340                         0x5c (PIN_INPUT_PULLDOWN | MUX_MODE2)   /* gpmc_a7.rgmii2_rclk */
 341                         0x60 (PIN_INPUT_PULLDOWN | MUX_MODE2)   /* gpmc_a8.rgmii2_rd3 */
 342                         0x64 (PIN_INPUT_PULLDOWN | MUX_MODE2)   /* gpmc_a9.rgmii2_rd2 */
 343                         0x68 (PIN_INPUT_PULLDOWN | MUX_MODE2)   /* gpmc_a10.rgmii2_rd1 */
 344                         0x6c (PIN_INPUT_PULLDOWN | MUX_MODE2)   /* gpmc_a11.rgmii2_rd0 */
 345                 >;
 346         };
 347
 348         cpsw_sleep: cpsw_sleep {
 349                 pinctrl-single,pins = <
 350                         /* Slave 1 reset value */
 351                         0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 352                         0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 353                         0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7)
 354                         0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 355                         0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 356                         0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 357                         0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7)
 358                         0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 359                         0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 360                         0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 361                         0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
 362                         0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 363
 364                         /* Slave 2 reset value*/
 365                         0x40 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 366                         0x44 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 367                         0x48 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 368                         0x4c (PIN_INPUT_PULLDOWN | MUX_MODE7)
 369                         0x50 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 370                         0x54 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 371                         0x58 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 372                         0x5c (PIN_INPUT_PULLDOWN | MUX_MODE7)
 373                         0x60 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 374                         0x64 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 375                         0x68 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 376                         0x6c (PIN_INPUT_PULLDOWN | MUX_MODE7)
 377                 >;
 378         };
 379
 380         davinci_mdio_default: davinci_mdio_default {
 381                 pinctrl-single,pins = <
 382                         /* MDIO */
 383                         0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)    /* mdio_data.mdio_data */
 384                         0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)                   /* mdio_clk.mdio_clk */
 385                 >;
 386         };
 387
 388         davinci_mdio_sleep: davinci_mdio_sleep {
 389                 pinctrl-single,pins = <
 390                         /* MDIO reset value */
 391                         0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 392                         0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
 393                 >;
 394         };
 395
 396         mmc1_pins: pinmux_mmc1_pins {
 397                 pinctrl-single,pins = <
 398                         0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
 399                 >;
 400         };
 401
 402         mcasp1_pins: mcasp1_pins {
 403                 pinctrl-single,pins = <
 404                         0x10c (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_crs.mcasp1_aclkx */
 405                         0x110 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_rxerr.mcasp1_fsx */
 406                         0x108 (PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* mii1_col.mcasp1_axr2 */
 407                         0x144 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* rmii1_ref_clk.mcasp1_axr3 */
 408                 >;
 409         };
 410
 411         mcasp1_pins_sleep: mcasp1_pins_sleep {
 412                 pinctrl-single,pins = <
 413                         0x10c (PIN_INPUT_PULLDOWN | MUX_MODE7)
 414                         0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 415                         0x108 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 416                         0x144 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 417                 >;
 418         };
 419
 420         mmc2_pins: pinmux_mmc2_pins {
 421                 pinctrl-single,pins = <
 422                         0x74 (PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpio0_31 */
 423                         0x80 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */
 424                         0x84 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
 425                         0x00 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
 426                         0x04 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
 427                         0x08 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
 428                         0x0c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
 429                 >;
 430         };
 431
 432         wl12xx_gpio: pinmux_wl12xx_gpio {
 433                 pinctrl-single,pins = <
 434                         0x7c (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_csn0.gpio1_29 */
 435                 >;
 436         };
 437 };
 438
 439 &uart0 {
 440         pinctrl-names = "default";
 441         pinctrl-0 = <&uart0_pins>;
 442
 443         status = "okay";
 444 };
 445
 446 &i2c0 {
 447         pinctrl-names = "default";
 448         pinctrl-0 = <&i2c0_pins>;
 449
 450         status = "okay";
 451         clock-frequency = <400000>;
 452
 453         tps: tps@2d {
 454                 reg = <0x2d>;
 455         };
 456
 457         lis331dlh: lis331dlh@18 {
 458                 compatible = "st,lis331dlh", "st,lis3lv02d";
 459                 reg = <0x18>;
 460                 Vdd-supply = <&lis3_reg>;
 461                 Vdd_IO-supply = <&lis3_reg>;
 462
 463                 st,click-single-x;
 464                 st,click-single-y;
 465                 st,click-single-z;
 466                 st,click-thresh-x = <10>;
 467                 st,click-thresh-y = <10>;
 468                 st,click-thresh-z = <10>;
 469                 st,irq1-click;
 470                 st,irq2-click;
 471                 st,wakeup-x-lo;
 472                 st,wakeup-x-hi;
 473                 st,wakeup-y-lo;
 474                 st,wakeup-y-hi;
 475                 st,wakeup-z-lo;
 476                 st,wakeup-z-hi;
 477                 st,min-limit-x = <120>;
 478                 st,min-limit-y = <120>;
 479                 st,min-limit-z = <140>;
 480                 st,max-limit-x = <550>;
 481                 st,max-limit-y = <550>;
 482                 st,max-limit-z = <750>;
 483         };
 484
 485         tlv320aic3106: tlv320aic3106@1b {
 486                 #sound-dai-cells = <0>;
 487                 compatible = "ti,tlv320aic3106";
 488                 reg = <0x1b>;
 489                 status = "okay";
 490
 491                 /* Regulators */
 492                 AVDD-supply = <&vaux2_reg>;
 493                 IOVDD-supply = <&vaux2_reg>;
 494                 DRVDD-supply = <&vaux2_reg>;
 495                 DVDD-supply = <&vbat>;
 496         };
 497 };
 498
 499 &usb {
 500         status = "okay";
 501 };
 502
 503 &usb_ctrl_mod {
 504         status = "okay";
 505 };
 506
 507 &usb0_phy {
 508         status = "okay";
 509 };
 510
 511 &usb1_phy {
 512         status = "okay";
 513 };
 514
 515 &usb0 {
 516         status = "okay";
 517 };
 518
 519 &usb1 {
 520         status = "okay";
 521         dr_mode = "host";
 522 };
 523
 524 &cppi41dma  {
 525         status = "okay";
 526 };
 527
 528 &epwmss2 {
 529         status = "okay";
 530
 531         ecap2: ecap@48304100 {
 532                 status = "okay";
 533                 pinctrl-names = "default";
 534                 pinctrl-0 = <&ecap2_pins>;
 535         };
 536 };
 537
 538 #include "tps65910.dtsi"
 539
 540 &tps {
 541         vcc1-supply = <&vbat>;
 542         vcc2-supply = <&vbat>;
 543         vcc3-supply = <&vbat>;
 544         vcc4-supply = <&vbat>;
 545         vcc5-supply = <&vbat>;
 546         vcc6-supply = <&vbat>;
 547         vcc7-supply = <&vbat>;
 548         vccio-supply = <&vbat>;
 549
 550         regulators {
 551                 vrtc_reg: regulator@0 {
 552                         regulator-always-on;
 553                 };
 554
 555                 vio_reg: regulator@1 {
 556                         regulator-always-on;
 557                 };
 558
 559                 vdd1_reg: regulator@2 {
 560                         /* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
 561                         regulator-name = "vdd_mpu";
 562                         regulator-min-microvolt = <912500>;
 563                         regulator-max-microvolt = <1312500>;
 564                         regulator-boot-on;
 565                         regulator-always-on;
 566                 };
 567
 568                 vdd2_reg: regulator@3 {
 569                         /* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
 570                         regulator-name = "vdd_core";
 571                         regulator-min-microvolt = <912500>;
 572                         regulator-max-microvolt = <1150000>;
 573                         regulator-boot-on;
 574                         regulator-always-on;
 575                 };
 576
 577                 vdd3_reg: regulator@4 {
 578                         regulator-always-on;
 579                 };
 580
 581                 vdig1_reg: regulator@5 {
 582                         regulator-always-on;
 583                 };
 584
 585                 vdig2_reg: regulator@6 {
 586                         regulator-always-on;
 587                 };
 588
 589                 vpll_reg: regulator@7 {
 590                         regulator-always-on;
 591                 };
 592
 593                 vdac_reg: regulator@8 {
 594                         regulator-always-on;
 595                 };
 596
 597                 vaux1_reg: regulator@9 {
 598                         regulator-always-on;
 599                 };
 600
 601                 vaux2_reg: regulator@10 {
 602                         regulator-always-on;
 603                 };
 604
 605                 vaux33_reg: regulator@11 {
 606                         regulator-always-on;
 607                 };
 608
 609                 vmmc_reg: regulator@12 {
 610                         regulator-min-microvolt = <1800000>;
 611                         regulator-max-microvolt = <3300000>;
 612                         regulator-always-on;
 613                 };
 614         };
 615 };
 616
 617 &mac {
 618         pinctrl-names = "default", "sleep";
 619         pinctrl-0 = <&cpsw_default>;
 620         pinctrl-1 = <&cpsw_sleep>;
 621         dual_emac = <1>;
 622         status = "okay";
 623 };
 624
 625 &davinci_mdio {
 626         pinctrl-names = "default", "sleep";
 627         pinctrl-0 = <&davinci_mdio_default>;
 628         pinctrl-1 = <&davinci_mdio_sleep>;
 629         status = "okay";
 630 };
 631
 632 &cpsw_emac0 {
 633         phy_id = <&davinci_mdio>, <0>;
 634         phy-mode = "rgmii-txid";
 635         dual_emac_res_vlan = <1>;
 636 };
 637
 638 &cpsw_emac1 {
 639         phy_id = <&davinci_mdio>, <1>;
 640         phy-mode = "rgmii-txid";
 641         dual_emac_res_vlan = <2>;
 642 };
 643
 644 &mmc1 {
 645         status = "okay";
 646         vmmc-supply = <&vmmc_reg>;
 647         bus-width = <4>;
 648         pinctrl-names = "default";
 649         pinctrl-0 = <&mmc1_pins>;
 650         cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
 651 };
 652
 653 &sham {
 654         status = "okay";
 655 };
 656
 657 &aes {
 658         status = "okay";
 659 };
 660
 661 &gpio0 {
 662         ti,no-reset-on-init;
 663 };
 664
 665 &mmc2 {
 666         status = "okay";
 667         vmmc-supply = <&wl12xx_vmmc>;
 668         ti,non-removable;
 669         bus-width = <4>;
 670         cap-power-off-card;
 671         pinctrl-names = "default";
 672         pinctrl-0 = <&mmc2_pins>;
 673
 674         #address-cells = <1>;
 675         #size-cells = <0>;
 676         wlcore: wlcore@2 {
 677                 compatible = "ti,wl1271";
 678                 reg = <2>;
 679                 interrupt-parent = <&gpio0>;
 680                 interrupts = <31 IRQ_TYPE_LEVEL_HIGH>; /* gpio 31 */
 681                 ref-clock-frequency = <38400000>;
 682         };
 683 };
 684
 685 &mcasp1 {
 686         #sound-dai-cells = <0>;
 687         pinctrl-names = "default", "sleep";
 688         pinctrl-0 = <&mcasp1_pins>;
 689         pinctrl-1 = <&mcasp1_pins_sleep>;
 690
 691         status = "okay";
 692
 693         op-mode = <0>;          /* MCASP_IIS_MODE */
 694         tdm-slots = <2>;
 695         /* 4 serializers */
 696         serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
 697                 0 0 1 2
 698         >;
 699         tx-num-evt = <32>;
 700         rx-num-evt = <32>;
 701 };
 702
 703 &tscadc {
 704         status = "okay";
 705         tsc {
 706                 ti,wires = <4>;
 707                 ti,x-plate-resistance = <200>;
 708                 ti,coordinate-readouts = <5>;
 709                 ti,wire-config = <0x00 0x11 0x22 0x33>;
 710         };
 711 };
 712
 713 &lcdc {
 714       status = "okay";
 715 };