mm: hugetlb: fix hugepage memory leak caused by wrong reserve count
[linux/fpc-iii.git] / arch / arm / boot / dts / at91-kizboxmini.dts
blob9682d105d4d8317a4733412fbe4cde6241158e74
1 /*
2  * at91-kizboxmini.dts - Device Tree file for Overkiz Kizbox mini board
3  *
4  * Copyright (C) 2014 GaĆ«l PORTAY <g.portay@overkiz.com>
5  *
6  * Licensed under GPLv2 or later.
7  */
8 /dts-v1/;
9 #include "at91sam9g25.dtsi"
10 #include <dt-bindings/pwm/pwm.h>
12 / {
13         model = "Overkiz Kizbox mini";
14         compatible = "overkiz,kizboxmini", "atmel,at91sam9g25", "atmel,at91sam9x5", "atmel,at91sam9";
16         chosen {
17                 bootargs = "ubi.mtd=ubi";
18                 stdout-path = &dbgu;
19         };
21         memory {
22                 reg = <0x20000000 0x8000000>;
23         };
25         clocks {
26                 slow_xtal {
27                         clock-frequency = <32768>;
28                 };
30                 main_xtal {
31                         clock-frequency = <12000000>;
32                 };
33         };
35         ahb {
36                 apb {
37                         usart0: serial@f801c000 {
38                                 status = "okay";
39                         };
41                         macb0: ethernet@f802c000 {
42                                 phy-mode = "rmii";
43                                 status = "okay";
44                         };
46                         pwm0: pwm@f8034000 {
47                                 pinctrl-names = "default";
48                                 pinctrl-0 = <&pinctrl_pwm0_pwm0_1
49                                              &pinctrl_pwm0_pwm1_1>;
50                                 status = "okay";
51                         };
53                         dbgu: serial@fffff200 {
54                                 status = "okay";
55                         };
57                         watchdog@fffffe40 {
58                                 status = "okay";
59                         };
60                 };
62                 usb0: ohci@00600000 {
63                         num-ports = <1>;
64                         status = "okay";
65                 };
67                 usb1: ehci@00700000 {
68                         status = "okay";
69                 };
71                 nand0: nand@40000000 {
72                         nand-bus-width = <8>;
73                         nand-ecc-mode = "hw";
74                         atmel,has-pmecc;
75                         atmel,pmecc-cap = <4>;
76                         atmel,pmecc-sector-size = <512>;
77                         nand-on-flash-bbt;
78                         status = "okay";
80                         bootstrap@0 {
81                                 label = "bootstrap";
82                                 reg = <0x0 0x20000>;
83                         };
85                         ubi@20000 {
86                                 label = "ubi";
87                                 reg = <0x20000 0x7fe0000>;
88                         };
89                 };
90         };
92         gpio_keys {
93                 compatible = "gpio-keys";
94                 #address-cells = <1>;
95                 #size-cells = <0>;
97                 prog {
98                         label = "PB_PROG";
99                         gpios = <&pioC 17 GPIO_ACTIVE_LOW>;
100                         linux,code = <0x102>;
101                         wakeup-source;
102                 };
104                 reset {
105                         label = "PB_RST";
106                         gpios = <&pioC 16 GPIO_ACTIVE_LOW>;
107                         linux,code = <0x100>;
108                         wakeup-source;
109                 };
110         };
112         pwm_leds {
113                 compatible = "pwm-leds";
115                 green {
116                         label = "pwm:green:user";
117                         pwms = <&pwm0 0 10000000 0>;
118                         max-brightness = <255>;
119                         linux,default-trigger = "default-on";
120                 };
122                 red {
123                         label = "pwm:red:user";
124                         pwms = <&pwm0 1 10000000 0>;
125                         max-brightness = <255>;
126                         linux,default-trigger = "default-on";
127                 };
128         };