mm: hugetlb: fix hugepage memory leak caused by wrong reserve count
[linux/fpc-iii.git] / arch / arm / boot / dts / at91sam9263.dtsi
blob93446420af258d795b874efde5b522aac1ab3e1a
1 /*
2  * at91sam9263.dtsi - Device Tree Include file for AT91SAM9263 family SoC
3  *
4  *  Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5  *
6  * Licensed under GPLv2 only.
7  */
9 #include "skeleton.dtsi"
10 #include <dt-bindings/pinctrl/at91.h>
11 #include <dt-bindings/interrupt-controller/irq.h>
12 #include <dt-bindings/gpio/gpio.h>
13 #include <dt-bindings/clock/at91.h>
15 / {
16         model = "Atmel AT91SAM9263 family SoC";
17         compatible = "atmel,at91sam9263";
18         interrupt-parent = <&aic>;
20         aliases {
21                 serial0 = &dbgu;
22                 serial1 = &usart0;
23                 serial2 = &usart1;
24                 serial3 = &usart2;
25                 gpio0 = &pioA;
26                 gpio1 = &pioB;
27                 gpio2 = &pioC;
28                 gpio3 = &pioD;
29                 gpio4 = &pioE;
30                 tcb0 = &tcb0;
31                 i2c0 = &i2c0;
32                 ssc0 = &ssc0;
33                 ssc1 = &ssc1;
34                 pwm0 = &pwm0;
35         };
37         cpus {
38                 #address-cells = <0>;
39                 #size-cells = <0>;
41                 cpu {
42                         compatible = "arm,arm926ej-s";
43                         device_type = "cpu";
44                 };
45         };
47         memory {
48                 reg = <0x20000000 0x08000000>;
49         };
51         clocks {
52                 main_xtal: main_xtal {
53                         compatible = "fixed-clock";
54                         #clock-cells = <0>;
55                         clock-frequency = <0>;
56                 };
58                 slow_xtal: slow_xtal {
59                         compatible = "fixed-clock";
60                         #clock-cells = <0>;
61                         clock-frequency = <0>;
62                 };
63         };
65         sram0: sram@00300000 {
66                 compatible = "mmio-sram";
67                 reg = <0x00300000 0x14000>;
68         };
70         sram1: sram@00500000 {
71                 compatible = "mmio-sram";
72                 reg = <0x00500000 0x4000>;
73         };
75         ahb {
76                 compatible = "simple-bus";
77                 #address-cells = <1>;
78                 #size-cells = <1>;
79                 ranges;
81                 apb {
82                         compatible = "simple-bus";
83                         #address-cells = <1>;
84                         #size-cells = <1>;
85                         ranges;
87                         aic: interrupt-controller@fffff000 {
88                                 #interrupt-cells = <3>;
89                                 compatible = "atmel,at91rm9200-aic";
90                                 interrupt-controller;
91                                 reg = <0xfffff000 0x200>;
92                                 atmel,external-irqs = <30 31>;
93                         };
95                         pmc: pmc@fffffc00 {
96                                 compatible = "atmel,at91rm9200-pmc", "syscon";
97                                 reg = <0xfffffc00 0x100>;
98                                 interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
99                                 interrupt-controller;
100                                 #address-cells = <1>;
101                                 #size-cells = <0>;
102                                 #interrupt-cells = <1>;
104                                 main_osc: main_osc {
105                                         compatible = "atmel,at91rm9200-clk-main-osc";
106                                         #clock-cells = <0>;
107                                         interrupts-extended = <&pmc AT91_PMC_MOSCS>;
108                                         clocks = <&main_xtal>;
109                                 };
111                                 main: mainck {
112                                         compatible = "atmel,at91rm9200-clk-main";
113                                         #clock-cells = <0>;
114                                         clocks = <&main_osc>;
115                                 };
117                                 plla: pllack {
118                                         compatible = "atmel,at91rm9200-clk-pll";
119                                         #clock-cells = <0>;
120                                         interrupts-extended = <&pmc AT91_PMC_LOCKA>;
121                                         clocks = <&main>;
122                                         reg = <0>;
123                                         atmel,clk-input-range = <1000000 32000000>;
124                                         #atmel,pll-clk-output-range-cells = <4>;
125                                         atmel,pll-clk-output-ranges = <80000000 200000000 0 1>,
126                                                                 <190000000 240000000 2 1>;
127                                 };
129                                 pllb: pllbck {
130                                         compatible = "atmel,at91rm9200-clk-pll";
131                                         #clock-cells = <0>;
132                                         interrupts-extended = <&pmc AT91_PMC_LOCKB>;
133                                         clocks = <&main>;
134                                         reg = <1>;
135                                         atmel,clk-input-range = <1000000 32000000>;
136                                         #atmel,pll-clk-output-range-cells = <4>;
137                                         atmel,pll-clk-output-ranges = <80000000 200000000 0 1>,
138                                                                 <190000000 240000000 2 1>;
139                                 };
141                                 mck: masterck {
142                                         compatible = "atmel,at91rm9200-clk-master";
143                                         #clock-cells = <0>;
144                                         interrupts-extended = <&pmc AT91_PMC_MCKRDY>;
145                                         clocks = <&slow_xtal>, <&main>, <&plla>, <&pllb>;
146                                         atmel,clk-output-range = <0 120000000>;
147                                         atmel,clk-divisors = <1 2 4 0>;
148                                 };
150                                 usb: usbck {
151                                         compatible = "atmel,at91rm9200-clk-usb";
152                                         #clock-cells = <0>;
153                                         atmel,clk-divisors = <1 2 4 0>;
154                                         clocks = <&pllb>;
155                                 };
157                                 prog: progck {
158                                         compatible = "atmel,at91rm9200-clk-programmable";
159                                         #address-cells = <1>;
160                                         #size-cells = <0>;
161                                         interrupt-parent = <&pmc>;
162                                         clocks = <&slow_xtal>, <&main>, <&plla>, <&pllb>;
164                                         prog0: prog0 {
165                                                 #clock-cells = <0>;
166                                                 reg = <0>;
167                                                 interrupts = <AT91_PMC_PCKRDY(0)>;
168                                         };
170                                         prog1: prog1 {
171                                                 #clock-cells = <0>;
172                                                 reg = <1>;
173                                                 interrupts = <AT91_PMC_PCKRDY(1)>;
174                                         };
176                                         prog2: prog2 {
177                                                 #clock-cells = <0>;
178                                                 reg = <2>;
179                                                 interrupts = <AT91_PMC_PCKRDY(2)>;
180                                         };
182                                         prog3: prog3 {
183                                                 #clock-cells = <0>;
184                                                 reg = <3>;
185                                                 interrupts = <AT91_PMC_PCKRDY(3)>;
186                                         };
187                                 };
189                                 systemck {
190                                         compatible = "atmel,at91rm9200-clk-system";
191                                         #address-cells = <1>;
192                                         #size-cells = <0>;
194                                         uhpck: uhpck {
195                                                 #clock-cells = <0>;
196                                                 reg = <6>;
197                                                 clocks = <&usb>;
198                                         };
200                                         udpck: udpck {
201                                                 #clock-cells = <0>;
202                                                 reg = <7>;
203                                                 clocks = <&usb>;
204                                         };
206                                         pck0: pck0 {
207                                                 #clock-cells = <0>;
208                                                 reg = <8>;
209                                                 clocks = <&prog0>;
210                                         };
212                                         pck1: pck1 {
213                                                 #clock-cells = <0>;
214                                                 reg = <9>;
215                                                 clocks = <&prog1>;
216                                         };
218                                         pck2: pck2 {
219                                                 #clock-cells = <0>;
220                                                 reg = <10>;
221                                                 clocks = <&prog2>;
222                                         };
224                                         pck3: pck3 {
225                                                 #clock-cells = <0>;
226                                                 reg = <11>;
227                                                 clocks = <&prog3>;
228                                         };
229                                 };
231                                 periphck {
232                                         compatible = "atmel,at91rm9200-clk-peripheral";
233                                         #address-cells = <1>;
234                                         #size-cells = <0>;
235                                         clocks = <&mck>;
237                                         pioA_clk: pioA_clk {
238                                                 #clock-cells = <0>;
239                                                 reg = <2>;
240                                         };
242                                         pioB_clk: pioB_clk {
243                                                 #clock-cells = <0>;
244                                                 reg = <3>;
245                                         };
247                                         pioCDE_clk: pioCDE_clk {
248                                                 #clock-cells = <0>;
249                                                 reg = <4>;
250                                         };
252                                         usart0_clk: usart0_clk {
253                                                 #clock-cells = <0>;
254                                                 reg = <7>;
255                                         };
257                                         usart1_clk: usart1_clk {
258                                                 #clock-cells = <0>;
259                                                 reg = <8>;
260                                         };
262                                         usart2_clk: usart2_clk {
263                                                 #clock-cells = <0>;
264                                                 reg = <9>;
265                                         };
267                                         mci0_clk: mci0_clk {
268                                                 #clock-cells = <0>;
269                                                 reg = <10>;
270                                         };
272                                         mci1_clk: mci1_clk {
273                                                 #clock-cells = <0>;
274                                                 reg = <11>;
275                                         };
277                                         can_clk: can_clk {
278                                                 #clock-cells = <0>;
279                                                 reg = <12>;
280                                         };
282                                         twi0_clk: twi0_clk {
283                                                 #clock-cells = <0>;
284                                                 reg = <13>;
285                                         };
287                                         spi0_clk: spi0_clk {
288                                                 #clock-cells = <0>;
289                                                 reg = <14>;
290                                         };
292                                         spi1_clk: spi1_clk {
293                                                 #clock-cells = <0>;
294                                                 reg = <15>;
295                                         };
297                                         ssc0_clk: ssc0_clk {
298                                                 #clock-cells = <0>;
299                                                 reg = <16>;
300                                         };
302                                         ssc1_clk: ssc1_clk {
303                                                 #clock-cells = <0>;
304                                                 reg = <17>;
305                                         };
307                                         ac97_clk: ac97_clk {
308                                                 #clock-cells = <0>;
309                                                 reg = <18>;
310                                         };
312                                         tcb_clk: tcb_clk {
313                                                 #clock-cells = <0>;
314                                                 reg = <19>;
315                                         };
317                                         pwm_clk: pwm_clk {
318                                                 #clock-cells = <0>;
319                                                 reg = <20>;
320                                         };
322                                         macb0_clk: macb0_clk {
323                                                 #clock-cells = <0>;
324                                                 reg = <21>;
325                                         };
327                                         g2de_clk: g2de_clk {
328                                                 #clock-cells = <0>;
329                                                 reg = <23>;
330                                         };
332                                         udc_clk: udc_clk {
333                                                 #clock-cells = <0>;
334                                                 reg = <24>;
335                                         };
337                                         isi_clk: isi_clk {
338                                                 #clock-cells = <0>;
339                                                 reg = <25>;
340                                         };
342                                         lcd_clk: lcd_clk {
343                                                 #clock-cells = <0>;
344                                                 reg = <26>;
345                                         };
347                                         dma_clk: dma_clk {
348                                                 #clock-cells = <0>;
349                                                 reg = <27>;
350                                         };
352                                         ohci_clk: ohci_clk {
353                                                 #clock-cells = <0>;
354                                                 reg = <29>;
355                                         };
356                                 };
357                         };
359                         ramc0: ramc@ffffe200 {
360                                 compatible = "atmel,at91sam9260-sdramc";
361                                 reg = <0xffffe200 0x200>;
362                         };
364                         ramc1: ramc@ffffe800 {
365                                 compatible = "atmel,at91sam9260-sdramc";
366                                 reg = <0xffffe800 0x200>;
367                         };
369                         pit: timer@fffffd30 {
370                                 compatible = "atmel,at91sam9260-pit";
371                                 reg = <0xfffffd30 0xf>;
372                                 interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
373                                 clocks = <&mck>;
374                         };
376                         tcb0: timer@fff7c000 {
377                                 compatible = "atmel,at91rm9200-tcb";
378                                 reg = <0xfff7c000 0x100>;
379                                 interrupts = <19 IRQ_TYPE_LEVEL_HIGH 0>;
380                                 clocks = <&tcb_clk>, <&slow_xtal>;
381                                 clock-names = "t0_clk", "slow_clk";
382                         };
384                         rstc@fffffd00 {
385                                 compatible = "atmel,at91sam9260-rstc";
386                                 reg = <0xfffffd00 0x10>;
387                                 clocks = <&slow_xtal>;
388                         };
390                         shdwc@fffffd10 {
391                                 compatible = "atmel,at91sam9260-shdwc";
392                                 reg = <0xfffffd10 0x10>;
393                                 clocks = <&slow_xtal>;
394                         };
396                         pinctrl@fffff200 {
397                                 #address-cells = <1>;
398                                 #size-cells = <1>;
399                                 compatible = "atmel,at91rm9200-pinctrl", "simple-bus";
400                                 ranges = <0xfffff200 0xfffff200 0xa00>;
402                                 atmel,mux-mask = <
403                                       /*    A         B     */
404                                        0xfffffffb 0xffffe07f  /* pioA */
405                                        0x0007ffff 0x39072fff  /* pioB */
406                                        0xffffffff 0x3ffffff8  /* pioC */
407                                        0xfffffbff 0xffffffff  /* pioD */
408                                        0xffe00fff 0xfbfcff00  /* pioE */
409                                       >;
411                                 /* shared pinctrl settings */
412                                 dbgu {
413                                         pinctrl_dbgu: dbgu-0 {
414                                                 atmel,pins =
415                                                         <AT91_PIOC 30 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PC30 periph A */
416                                                          AT91_PIOC 31 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;      /* PC31 periph with pullup */
417                                         };
418                                 };
420                                 usart0 {
421                                         pinctrl_usart0: usart0-0 {
422                                                 atmel,pins =
423                                                         <AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_PULL_UP        /* PA26 periph A with pullup */
424                                                          AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA27 periph A */
425                                         };
427                                         pinctrl_usart0_rts: usart0_rts-0 {
428                                                 atmel,pins =
429                                                         <AT91_PIOA 28 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA28 periph A */
430                                         };
432                                         pinctrl_usart0_cts: usart0_cts-0 {
433                                                 atmel,pins =
434                                                         <AT91_PIOA 29 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA29 periph A */
435                                         };
436                                 };
438                                 usart1 {
439                                         pinctrl_usart1: usart1-0 {
440                                                 atmel,pins =
441                                                         <AT91_PIOD 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PD0 periph A with pullup */
442                                                          AT91_PIOD 1 AT91_PERIPH_A AT91_PINCTRL_NONE>;  /* PD1 periph A */
443                                         };
445                                         pinctrl_usart1_rts: usart1_rts-0 {
446                                                 atmel,pins =
447                                                         <AT91_PIOD 7 AT91_PERIPH_B AT91_PINCTRL_NONE>;  /* PD7 periph B */
448                                         };
450                                         pinctrl_usart1_cts: usart1_cts-0 {
451                                                 atmel,pins =
452                                                         <AT91_PIOD 8 AT91_PERIPH_B AT91_PINCTRL_NONE>;  /* PD8 periph B */
453                                         };
454                                 };
456                                 usart2 {
457                                         pinctrl_usart2: usart2-0 {
458                                                 atmel,pins =
459                                                         <AT91_PIOD 2 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PD2 periph A with pullup */
460                                                          AT91_PIOD 3 AT91_PERIPH_A AT91_PINCTRL_NONE>;  /* PD3 periph A */
461                                         };
463                                         pinctrl_usart2_rts: usart2_rts-0 {
464                                                 atmel,pins =
465                                                         <AT91_PIOD 5 AT91_PERIPH_B AT91_PINCTRL_NONE>;  /* PD5 periph B */
466                                         };
468                                         pinctrl_usart2_cts: usart2_cts-0 {
469                                                 atmel,pins =
470                                                         <AT91_PIOD 6 AT91_PERIPH_B AT91_PINCTRL_NONE>;  /* PD6 periph B */
471                                         };
472                                 };
474                                 nand {
475                                         pinctrl_nand: nand-0 {
476                                                 atmel,pins =
477                                                         <AT91_PIOA 22 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP     /* PA22 gpio RDY pin pull_up*/
478                                                          AT91_PIOD 15 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;   /* PD15 gpio enable pin pull_up */
479                                         };
480                                 };
482                                 macb {
483                                         pinctrl_macb_rmii: macb_rmii-0 {
484                                                 atmel,pins =
485                                                         <AT91_PIOC 25 AT91_PERIPH_B AT91_PINCTRL_NONE   /* PC25 periph B */
486                                                          AT91_PIOE 21 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PE21 periph A */
487                                                          AT91_PIOE 23 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PE23 periph A */
488                                                          AT91_PIOE 24 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PE24 periph A */
489                                                          AT91_PIOE 25 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PE25 periph A */
490                                                          AT91_PIOE 26 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PE26 periph A */
491                                                          AT91_PIOE 27 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PE27 periph A */
492                                                          AT91_PIOE 28 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PE28 periph A */
493                                                          AT91_PIOE 29 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PE29 periph A */
494                                                          AT91_PIOE 30 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PE30 periph A */
495                                         };
497                                         pinctrl_macb_rmii_mii: macb_rmii_mii-0 {
498                                                 atmel,pins =
499                                                         <AT91_PIOC 20 AT91_PERIPH_B AT91_PINCTRL_NONE   /* PC20 periph B */
500                                                          AT91_PIOC 21 AT91_PERIPH_B AT91_PINCTRL_NONE   /* PC21 periph B */
501                                                          AT91_PIOC 22 AT91_PERIPH_B AT91_PINCTRL_NONE   /* PC22 periph B */
502                                                          AT91_PIOC 23 AT91_PERIPH_B AT91_PINCTRL_NONE   /* PC23 periph B */
503                                                          AT91_PIOC 24 AT91_PERIPH_B AT91_PINCTRL_NONE   /* PC24 periph B */
504                                                          AT91_PIOC 25 AT91_PERIPH_B AT91_PINCTRL_NONE   /* PC25 periph B */
505                                                          AT91_PIOC 27 AT91_PERIPH_B AT91_PINCTRL_NONE   /* PC27 periph B */
506                                                          AT91_PIOE 22 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PE22 periph B */
507                                         };
508                                 };
510                                 mmc0 {
511                                         pinctrl_mmc0_clk: mmc0_clk-0 {
512                                                 atmel,pins =
513                                                         <AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA12 periph A */
514                                         };
516                                         pinctrl_mmc0_slot0_cmd_dat0: mmc0_slot0_cmd_dat0-0 {
517                                                 atmel,pins =
518                                                         <AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA1 periph A with pullup */
519                                                          AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;       /* PA0 periph A with pullup */
520                                         };
522                                         pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 {
523                                                 atmel,pins =
524                                                         <AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA3 periph A with pullup */
525                                                          AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA4 periph A with pullup */
526                                                          AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;       /* PA5 periph A with pullup */
527                                         };
529                                         pinctrl_mmc0_slot1_cmd_dat0: mmc0_slot1_cmd_dat0-0 {
530                                                 atmel,pins =
531                                                         <AT91_PIOA 16 AT91_PERIPH_A AT91_PINCTRL_PULL_UP        /* PA16 periph A with pullup */
532                                                          AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;      /* PA17 periph A with pullup */
533                                         };
535                                         pinctrl_mmc0_slot1_dat1_3: mmc0_slot1_dat1_3-0 {
536                                                 atmel,pins =
537                                                         <AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_PULL_UP        /* PA18 periph A with pullup */
538                                                          AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_PULL_UP        /* PA19 periph A with pullup */
539                                                          AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;      /* PA20 periph A with pullup */
540                                         };
541                                 };
543                                 mmc1 {
544                                         pinctrl_mmc1_clk: mmc1_clk-0 {
545                                                 atmel,pins =
546                                                         <AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE>;  /* PA6 periph A */
547                                         };
549                                         pinctrl_mmc1_slot0_cmd_dat0: mmc1_slot0_cmd_dat0-0 {
550                                                 atmel,pins =
551                                                         <AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA7 periph A with pullup */
552                                                          AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;       /* PA8 periph A with pullup */
553                                         };
555                                         pinctrl_mmc1_slot0_dat1_3: mmc1_slot0_dat1_3-0 {
556                                                 atmel,pins =
557                                                         <AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA9 periph A with pullup */
558                                                          AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_PULL_UP        /* PA10 periph A with pullup */
559                                                          AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;      /* PA11 periph A with pullup */
560                                         };
562                                         pinctrl_mmc1_slot1_cmd_dat0: mmc1_slot1_cmd_dat0-0 {
563                                                 atmel,pins =
564                                                         <AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_PULL_UP        /* PA21 periph A with pullup */
565                                                          AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;      /* PA22 periph A with pullup */
566                                         };
568                                         pinctrl_mmc1_slot1_dat1_3: mmc1_slot1_dat1_3-0 {
569                                                 atmel,pins =
570                                                         <AT91_PIOA 23 AT91_PERIPH_A AT91_PINCTRL_PULL_UP        /* PA23 periph A with pullup */
571                                                          AT91_PIOA 24 AT91_PERIPH_A AT91_PINCTRL_PULL_UP        /* PA24 periph A with pullup */
572                                                          AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;      /* PA25 periph A with pullup */
573                                         };
574                                 };
576                                 ssc0 {
577                                         pinctrl_ssc0_tx: ssc0_tx-0 {
578                                                 atmel,pins =
579                                                         <AT91_PIOB 0 AT91_PERIPH_B AT91_PINCTRL_NONE    /* PB0 periph B */
580                                                          AT91_PIOB 1 AT91_PERIPH_B AT91_PINCTRL_NONE    /* PB1 periph B */
581                                                          AT91_PIOB 2 AT91_PERIPH_B AT91_PINCTRL_NONE>;  /* PB2 periph B */
582                                         };
584                                         pinctrl_ssc0_rx: ssc0_rx-0 {
585                                                 atmel,pins =
586                                                         <AT91_PIOB 3 AT91_PERIPH_B AT91_PINCTRL_NONE    /* PB3 periph B */
587                                                          AT91_PIOB 4 AT91_PERIPH_B AT91_PINCTRL_NONE    /* PB4 periph B */
588                                                          AT91_PIOB 5 AT91_PERIPH_B AT91_PINCTRL_NONE>;  /* PB5 periph B */
589                                         };
590                                 };
592                                 ssc1 {
593                                         pinctrl_ssc1_tx: ssc1_tx-0 {
594                                                 atmel,pins =
595                                                         <AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE    /* PB6 periph A */
596                                                          AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE    /* PB7 periph A */
597                                                          AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_NONE>;  /* PB8 periph A */
598                                         };
600                                         pinctrl_ssc1_rx: ssc1_rx-0 {
601                                                 atmel,pins =
602                                                         <AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE    /* PB9 periph A */
603                                                          AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PB10 periph A */
604                                                          AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB11 periph A */
605                                         };
606                                 };
608                                 spi0 {
609                                         pinctrl_spi0: spi0-0 {
610                                                 atmel,pins =
611                                                         <AT91_PIOA 0 AT91_PERIPH_B AT91_PINCTRL_NONE    /* PA0 periph B SPI0_MISO pin */
612                                                          AT91_PIOA 1 AT91_PERIPH_B AT91_PINCTRL_NONE    /* PA1 periph B SPI0_MOSI pin */
613                                                          AT91_PIOA 2 AT91_PERIPH_B AT91_PINCTRL_NONE>;  /* PA2 periph B SPI0_SPCK pin */
614                                         };
615                                 };
617                                 spi1 {
618                                         pinctrl_spi1: spi1-0 {
619                                                 atmel,pins =
620                                                         <AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PB12 periph A SPI1_MISO pin */
621                                                          AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PB13 periph A SPI1_MOSI pin */
622                                                          AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB14 periph A SPI1_SPCK pin */
623                                         };
624                                 };
626                                 tcb0 {
627                                         pinctrl_tcb0_tclk0: tcb0_tclk0-0 {
628                                                 atmel,pins = <AT91_PIOB 28 AT91_PERIPH_B AT91_PINCTRL_NONE>;
629                                         };
631                                         pinctrl_tcb0_tclk1: tcb0_tclk1-0 {
632                                                 atmel,pins = <AT91_PIOC 28 AT91_PERIPH_B AT91_PINCTRL_NONE>;
633                                         };
635                                         pinctrl_tcb0_tclk2: tcb0_tclk2-0 {
636                                                 atmel,pins = <AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE>;
637                                         };
639                                         pinctrl_tcb0_tioa0: tcb0_tioa0-0 {
640                                                 atmel,pins = <AT91_PIOE 18 AT91_PERIPH_B AT91_PINCTRL_NONE>;
641                                         };
643                                         pinctrl_tcb0_tioa1: tcb0_tioa1-0 {
644                                                 atmel,pins = <AT91_PIOE 8 AT91_PERIPH_B AT91_PINCTRL_NONE>;
645                                         };
647                                         pinctrl_tcb0_tioa2: tcb0_tioa2-0 {
648                                                 atmel,pins = <AT91_PIOB 17 AT91_PERIPH_B AT91_PINCTRL_NONE>;
649                                         };
651                                         pinctrl_tcb0_tiob0: tcb0_tiob0-0 {
652                                                 atmel,pins = <AT91_PIOE 19 AT91_PERIPH_B AT91_PINCTRL_NONE>;
653                                         };
655                                         pinctrl_tcb0_tiob1: tcb0_tiob1-0 {
656                                                 atmel,pins = <AT91_PIOE 9 AT91_PERIPH_B AT91_PINCTRL_NONE>;
657                                         };
659                                         pinctrl_tcb0_tiob2: tcb0_tiob2-0 {
660                                                 atmel,pins = <AT91_PIOB 18 AT91_PERIPH_B AT91_PINCTRL_NONE>;
661                                         };
662                                 };
664                                 fb {
665                                         pinctrl_fb: fb-0 {
666                                                 atmel,pins =
667                                                         <AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE    /* PC1 periph A */
668                                                          AT91_PIOC 2 AT91_PERIPH_A AT91_PINCTRL_NONE    /* PC2 periph A */
669                                                          AT91_PIOC 3 AT91_PERIPH_A AT91_PINCTRL_NONE    /* PC3 periph A */
670                                                          AT91_PIOB 9 AT91_PERIPH_B AT91_PINCTRL_NONE    /* PB9 periph B */
671                                                          AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE    /* PC6 periph A */
672                                                          AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE    /* PC7 periph A */
673                                                          AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE    /* PC8 periph A */
674                                                          AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE    /* PC9 periph A */
675                                                          AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PC10 periph A */
676                                                          AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PC11 periph A */
677                                                          AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PC14 periph A */
678                                                          AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PC15 periph A */
679                                                          AT91_PIOC 16 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PC16 periph A */
680                                                          AT91_PIOC 12 AT91_PERIPH_B AT91_PINCTRL_NONE   /* PC12 periph B */
681                                                          AT91_PIOC 18 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PC18 periph A */
682                                                          AT91_PIOC 19 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PC19 periph A */
683                                                          AT91_PIOC 22 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PC22 periph A */
684                                                          AT91_PIOC 23 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PC23 periph A */
685                                                          AT91_PIOC 24 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PC24 periph A */
686                                                          AT91_PIOC 17 AT91_PERIPH_B AT91_PINCTRL_NONE   /* PC17 periph B */
687                                                          AT91_PIOC 26 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PC26 periph A */
688                                                          AT91_PIOC 27 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PC27 periph A */
689                                         };
690                                 };
692                                 can {
693                                         pinctrl_can_rx_tx: can_rx_tx {
694                                                 atmel,pins =
695                                                         <AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE   /* CANRX, conflicts with IRQ0 */
696                                                          AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* CANTX, conflicts with PCK0 */
697                                         };
698                                 };
700                                 ac97 {
701                                         pinctrl_ac97: ac97-0 {
702                                                 atmel,pins =
703                                                         <AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE    /* PB12 periph A AC97FS pin */
704                                                          AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE    /* PB13 periph A AC97CK pin */
705                                                          AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE    /* PB14 periph A AC97TX pin */
706                                                          AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE>;  /* PB14 periph A AC97RX pin */
707                                         };
708                                 };
710                                 pioA: gpio@fffff200 {
711                                         compatible = "atmel,at91rm9200-gpio";
712                                         reg = <0xfffff200 0x200>;
713                                         interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
714                                         #gpio-cells = <2>;
715                                         gpio-controller;
716                                         interrupt-controller;
717                                         #interrupt-cells = <2>;
718                                         clocks = <&pioA_clk>;
719                                 };
721                                 pioB: gpio@fffff400 {
722                                         compatible = "atmel,at91rm9200-gpio";
723                                         reg = <0xfffff400 0x200>;
724                                         interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
725                                         #gpio-cells = <2>;
726                                         gpio-controller;
727                                         interrupt-controller;
728                                         #interrupt-cells = <2>;
729                                         clocks = <&pioB_clk>;
730                                 };
732                                 pioC: gpio@fffff600 {
733                                         compatible = "atmel,at91rm9200-gpio";
734                                         reg = <0xfffff600 0x200>;
735                                         interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>;
736                                         #gpio-cells = <2>;
737                                         gpio-controller;
738                                         interrupt-controller;
739                                         #interrupt-cells = <2>;
740                                         clocks = <&pioCDE_clk>;
741                                 };
743                                 pioD: gpio@fffff800 {
744                                         compatible = "atmel,at91rm9200-gpio";
745                                         reg = <0xfffff800 0x200>;
746                                         interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>;
747                                         #gpio-cells = <2>;
748                                         gpio-controller;
749                                         interrupt-controller;
750                                         #interrupt-cells = <2>;
751                                         clocks = <&pioCDE_clk>;
752                                 };
754                                 pioE: gpio@fffffa00 {
755                                         compatible = "atmel,at91rm9200-gpio";
756                                         reg = <0xfffffa00 0x200>;
757                                         interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>;
758                                         #gpio-cells = <2>;
759                                         gpio-controller;
760                                         interrupt-controller;
761                                         #interrupt-cells = <2>;
762                                         clocks = <&pioCDE_clk>;
763                                 };
764                         };
766                         dbgu: serial@ffffee00 {
767                                 compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
768                                 reg = <0xffffee00 0x200>;
769                                 interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
770                                 pinctrl-names = "default";
771                                 pinctrl-0 = <&pinctrl_dbgu>;
772                                 clocks = <&mck>;
773                                 clock-names = "usart";
774                                 status = "disabled";
775                         };
777                         usart0: serial@fff8c000 {
778                                 compatible = "atmel,at91sam9260-usart";
779                                 reg = <0xfff8c000 0x200>;
780                                 interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
781                                 atmel,use-dma-rx;
782                                 atmel,use-dma-tx;
783                                 pinctrl-names = "default";
784                                 pinctrl-0 = <&pinctrl_usart0>;
785                                 clocks = <&usart0_clk>;
786                                 clock-names = "usart";
787                                 status = "disabled";
788                         };
790                         usart1: serial@fff90000 {
791                                 compatible = "atmel,at91sam9260-usart";
792                                 reg = <0xfff90000 0x200>;
793                                 interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
794                                 atmel,use-dma-rx;
795                                 atmel,use-dma-tx;
796                                 pinctrl-names = "default";
797                                 pinctrl-0 = <&pinctrl_usart1>;
798                                 clocks = <&usart1_clk>;
799                                 clock-names = "usart";
800                                 status = "disabled";
801                         };
803                         usart2: serial@fff94000 {
804                                 compatible = "atmel,at91sam9260-usart";
805                                 reg = <0xfff94000 0x200>;
806                                 interrupts = <9 IRQ_TYPE_LEVEL_HIGH 5>;
807                                 atmel,use-dma-rx;
808                                 atmel,use-dma-tx;
809                                 pinctrl-names = "default";
810                                 pinctrl-0 = <&pinctrl_usart2>;
811                                 clocks = <&usart2_clk>;
812                                 clock-names = "usart";
813                                 status = "disabled";
814                         };
816                         ssc0: ssc@fff98000 {
817                                 compatible = "atmel,at91rm9200-ssc";
818                                 reg = <0xfff98000 0x4000>;
819                                 interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>;
820                                 pinctrl-names = "default";
821                                 pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
822                                 clocks = <&ssc0_clk>;
823                                 clock-names = "pclk";
824                                 status = "disabled";
825                         };
827                         ssc1: ssc@fff9c000 {
828                                 compatible = "atmel,at91rm9200-ssc";
829                                 reg = <0xfff9c000 0x4000>;
830                                 interrupts = <17 IRQ_TYPE_LEVEL_HIGH 5>;
831                                 pinctrl-names = "default";
832                                 pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
833                                 clocks = <&ssc1_clk>;
834                                 clock-names = "pclk";
835                                 status = "disabled";
836                         };
838                         ac97: sound@fffa0000 {
839                                 compatible = "atmel,at91sam9263-ac97c";
840                                 reg = <0xfffa0000 0x4000>;
841                                 interrupts = <18 IRQ_TYPE_LEVEL_HIGH 5>;
842                                 pinctrl-names = "default";
843                                 pinctrl-0 = <&pinctrl_ac97>;
844                                 clocks = <&ac97_clk>;
845                                 clock-names = "ac97_clk";
846                                 status = "disabled";
847                         };
849                         macb0: ethernet@fffbc000 {
850                                 compatible = "cdns,at91sam9260-macb", "cdns,macb";
851                                 reg = <0xfffbc000 0x100>;
852                                 interrupts = <21 IRQ_TYPE_LEVEL_HIGH 3>;
853                                 pinctrl-names = "default";
854                                 pinctrl-0 = <&pinctrl_macb_rmii>;
855                                 clocks = <&macb0_clk>, <&macb0_clk>;
856                                 clock-names = "hclk", "pclk";
857                                 status = "disabled";
858                         };
860                         usb1: gadget@fff78000 {
861                                 compatible = "atmel,at91sam9263-udc";
862                                 reg = <0xfff78000 0x4000>;
863                                 interrupts = <24 IRQ_TYPE_LEVEL_HIGH 2>;
864                                 clocks = <&udc_clk>, <&udpck>;
865                                 clock-names = "pclk", "hclk";
866                                 status = "disabled";
867                         };
869                         i2c0: i2c@fff88000 {
870                                 compatible = "atmel,at91sam9260-i2c";
871                                 reg = <0xfff88000 0x100>;
872                                 interrupts = <13 IRQ_TYPE_LEVEL_HIGH 6>;
873                                 #address-cells = <1>;
874                                 #size-cells = <0>;
875                                 clocks = <&twi0_clk>;
876                                 status = "disabled";
877                         };
879                         mmc0: mmc@fff80000 {
880                                 compatible = "atmel,hsmci";
881                                 reg = <0xfff80000 0x600>;
882                                 interrupts = <10 IRQ_TYPE_LEVEL_HIGH 0>;
883                                 pinctrl-names = "default";
884                                 #address-cells = <1>;
885                                 #size-cells = <0>;
886                                 clocks = <&mci0_clk>;
887                                 clock-names = "mci_clk";
888                                 status = "disabled";
889                         };
891                         mmc1: mmc@fff84000 {
892                                 compatible = "atmel,hsmci";
893                                 reg = <0xfff84000 0x600>;
894                                 interrupts = <11 IRQ_TYPE_LEVEL_HIGH 0>;
895                                 pinctrl-names = "default";
896                                 #address-cells = <1>;
897                                 #size-cells = <0>;
898                                 clocks = <&mci1_clk>;
899                                 clock-names = "mci_clk";
900                                 status = "disabled";
901                         };
903                         watchdog@fffffd40 {
904                                 compatible = "atmel,at91sam9260-wdt";
905                                 reg = <0xfffffd40 0x10>;
906                                 interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
907                                 clocks = <&slow_xtal>;
908                                 atmel,watchdog-type = "hardware";
909                                 atmel,reset-type = "all";
910                                 atmel,dbg-halt;
911                                 status = "disabled";
912                         };
914                         spi0: spi@fffa4000 {
915                                 #address-cells = <1>;
916                                 #size-cells = <0>;
917                                 compatible = "atmel,at91rm9200-spi";
918                                 reg = <0xfffa4000 0x200>;
919                                 interrupts = <14 IRQ_TYPE_LEVEL_HIGH 3>;
920                                 pinctrl-names = "default";
921                                 pinctrl-0 = <&pinctrl_spi0>;
922                                 clocks = <&spi0_clk>;
923                                 clock-names = "spi_clk";
924                                 status = "disabled";
925                         };
927                         spi1: spi@fffa8000 {
928                                 #address-cells = <1>;
929                                 #size-cells = <0>;
930                                 compatible = "atmel,at91rm9200-spi";
931                                 reg = <0xfffa8000 0x200>;
932                                 interrupts = <15 IRQ_TYPE_LEVEL_HIGH 3>;
933                                 pinctrl-names = "default";
934                                 pinctrl-0 = <&pinctrl_spi1>;
935                                 clocks = <&spi1_clk>;
936                                 clock-names = "spi_clk";
937                                 status = "disabled";
938                         };
940                         pwm0: pwm@fffb8000 {
941                                 compatible = "atmel,at91sam9rl-pwm";
942                                 reg = <0xfffb8000 0x300>;
943                                 interrupts = <20 IRQ_TYPE_LEVEL_HIGH 4>;
944                                 #pwm-cells = <3>;
945                                 clocks = <&pwm_clk>;
946                                 clock-names = "pwm_clk";
947                                 status = "disabled";
948                         };
950                         can: can@fffac000 {
951                                 compatible = "atmel,at91sam9263-can";
952                                 reg = <0xfffac000 0x300>;
953                                 interrupts = <12 IRQ_TYPE_LEVEL_HIGH 3>;
954                                 pinctrl-names = "default";
955                                 pinctrl-0 = <&pinctrl_can_rx_tx>;
956                                 clocks = <&can_clk>;
957                                 clock-names = "can_clk";
958                         };
960                         rtc@fffffd20 {
961                                 compatible = "atmel,at91sam9260-rtt";
962                                 reg = <0xfffffd20 0x10>;
963                                 interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
964                                 clocks = <&slow_xtal>;
965                                 status = "disabled";
966                         };
968                         rtc@fffffd50 {
969                                 compatible = "atmel,at91sam9260-rtt";
970                                 reg = <0xfffffd50 0x10>;
971                                 interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
972                                 clocks = <&slow_xtal>;
973                                 status = "disabled";
974                         };
976                         gpbr: syscon@fffffd60 {
977                                 compatible = "atmel,at91sam9260-gpbr", "syscon";
978                                 reg = <0xfffffd60 0x50>;
979                                 status = "disabled";
980                         };
981                 };
983                 fb0: fb@0x00700000 {
984                         compatible = "atmel,at91sam9263-lcdc";
985                         reg = <0x00700000 0x1000>;
986                         interrupts = <26 IRQ_TYPE_LEVEL_HIGH 3>;
987                         pinctrl-names = "default";
988                         pinctrl-0 = <&pinctrl_fb>;
989                         clocks = <&lcd_clk>, <&lcd_clk>;
990                         clock-names = "lcdc_clk", "hclk";
991                         status = "disabled";
992                 };
994                 nand0: nand@40000000 {
995                         compatible = "atmel,at91rm9200-nand";
996                         #address-cells = <1>;
997                         #size-cells = <1>;
998                         reg = <0x40000000 0x10000000
999                                0xffffe000 0x200
1000                               >;
1001                         atmel,nand-addr-offset = <21>;
1002                         atmel,nand-cmd-offset = <22>;
1003                         pinctrl-names = "default";
1004                         pinctrl-0 = <&pinctrl_nand>;
1005                         gpios = <&pioA 22 GPIO_ACTIVE_HIGH
1006                                  &pioD 15 GPIO_ACTIVE_HIGH
1007                                  0
1008                                 >;
1009                         status = "disabled";
1010                 };
1012                 usb0: ohci@00a00000 {
1013                         compatible = "atmel,at91rm9200-ohci", "usb-ohci";
1014                         reg = <0x00a00000 0x100000>;
1015                         interrupts = <29 IRQ_TYPE_LEVEL_HIGH 2>;
1016                         clocks = <&ohci_clk>, <&ohci_clk>, <&uhpck>;
1017                         clock-names = "ohci_clk", "hclk", "uhpck";
1018                         status = "disabled";
1019                 };
1020         };
1022         i2c@0 {
1023                 compatible = "i2c-gpio";
1024                 gpios = <&pioB 4 GPIO_ACTIVE_HIGH /* sda */
1025                          &pioB 5 GPIO_ACTIVE_HIGH /* scl */
1026                         >;
1027                 i2c-gpio,sda-open-drain;
1028                 i2c-gpio,scl-open-drain;
1029                 i2c-gpio,delay-us = <2>;        /* ~100 kHz */
1030                 #address-cells = <1>;
1031                 #size-cells = <0>;
1032                 status = "disabled";
1033         };