2 * Samsung's Exynos3250 based Rinato board device tree source
4 * Copyright (c) 2014 Samsung Electronics Co., Ltd.
5 * http://www.samsung.com
7 * Device tree source file for Samsung's Rinato board which is based on
8 * Samsung Exynos3250 SoC.
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License version 2 as
12 * published by the Free Software Foundation.
16 #include "exynos3250.dtsi"
17 #include <dt-bindings/input/input.h>
18 #include <dt-bindings/gpio/gpio.h>
19 #include <dt-bindings/clock/samsung,s2mps11.h>
22 model = "Samsung Rinato board";
23 compatible = "samsung,rinato", "samsung,exynos3250", "samsung,exynos3";
30 reg = <0x40000000 0x1ff00000>;
34 compatible = "samsung,secure-firmware";
35 reg = <0x0205F000 0x1000>;
39 compatible = "gpio-keys";
42 gpios = <&gpx2 7 GPIO_ACTIVE_LOW>;
43 linux,code = <KEY_POWER>;
45 debounce-interval = <10>;
50 i2c_max77836: i2c-gpio-0 {
51 compatible = "i2c-gpio";
52 gpios = <&gpd0 2 GPIO_ACTIVE_HIGH>, <&gpd0 3 GPIO_ACTIVE_HIGH>;
56 max77836: subpmic@25 {
57 compatible = "maxim,max77836";
58 interrupt-parent = <&gpx1>;
64 compatible = "maxim,max77836-muic";
68 compatible = "maxim,max77836-regulator";
69 safeout_reg: SAFEOUT {
70 regulator-name = "SAFEOUT";
73 charger_reg: CHARGER {
74 regulator-name = "CHARGER";
75 regulator-min-microamp = <45000>;
76 regulator-max-microamp = <475000>;
81 regulator-name = "MOT_2.7V";
82 regulator-min-microvolt = <1100000>;
83 regulator-max-microvolt = <2700000>;
87 regulator-name = "UNUSED_LDO2";
88 regulator-min-microvolt = <800000>;
89 regulator-max-microvolt = <3950000>;
94 compatible = "maxim,max77836-charger";
96 maxim,constant-uvolt = <4350000>;
97 maxim,fast-charge-uamp = <225000>;
98 maxim,eoc-uamp = <7500>;
99 maxim,ovp-uvolt = <6500000>;
105 compatible = "regulator-haptic";
106 haptic-supply = <&motor_reg>;
107 min-microvolt = <1100000>;
108 max-microvolt = <2700000>;
112 cpu_thermal: cpu-thermal {
115 /* Corresponds to 500MHz */
116 cooling-device = <&cpu0 5 5>;
119 /* Corresponds to 200MHz */
120 cooling-device = <&cpu0 8 8>;
128 vdd-supply = <&ldo3_reg>;
130 assigned-clocks = <&cmu CLK_SCLK_TSADC>;
131 assigned-clock-rates = <6000000>;
134 compatible = "ntc,ncp15wb473";
135 pullup-uv = <1800000>;
136 pullup-ohm = <100000>;
137 pulldown-ohm = <100000>;
138 io-channels = <&adc 0>;
142 compatible = "ntc,ncp15wb473";
143 pullup-uv = <1800000>;
144 pullup-ohm = <100000>;
145 pulldown-ohm = <100000>;
146 io-channels = <&adc 1>;
151 cpu0-supply = <&buck2_reg>;
156 vbus-supply = <&safeout_reg>;
160 vusb_d-supply = <&ldo15_reg>;
161 vusb_a-supply = <&ldo12_reg>;
162 dr_mode = "peripheral";
167 vddcore-supply = <&ldo6_reg>;
168 vddio-supply = <&ldo6_reg>;
169 samsung,pll-clock-frequency = <24000000>;
173 #address-cells = <1>;
180 remote-endpoint = <&dsi_in>;
181 samsung,burst-clock-frequency = <250000000>;
182 samsung,esc-clock-frequency = <20000000>;
188 compatible = "samsung,s6e63j0x03";
190 vdd3-supply = <&ldo16_reg>;
191 vci-supply = <&ldo20_reg>;
192 reset-gpios = <&gpe0 1 GPIO_ACTIVE_HIGH>;
193 te-gpios = <&gpx0 6 GPIO_ACTIVE_HIGH>;
194 power-on-delay= <30>;
195 power-off-delay= <120>;
200 panel-width-mm = <29>;
201 panel-height-mm = <29>;
205 clock-frequency = <4600000>;
211 vfront-porch = <150>;
219 remote-endpoint = <&dsi_out>;
237 #address-cells = <1>;
239 samsung,i2c-sda-delay = <100>;
240 samsung,i2c-slave-addr = <0x10>;
241 samsung,i2c-max-bus-freq = <100000>;
245 compatible = "samsung,s2mps14-pmic";
246 interrupt-parent = <&gpx0>;
251 s2mps14_osc: clocks {
252 compatible = "samsung,s2mps14-clk";
254 clock-output-names = "s2mps14_ap", "unused",
260 regulator-name = "VAP_ALIVE_1.0V";
261 regulator-min-microvolt = <1000000>;
262 regulator-max-microvolt = <1000000>;
265 regulator-state-mem {
266 regulator-on-in-suspend;
271 regulator-name = "VAP_M1_1.2V";
272 regulator-min-microvolt = <1200000>;
273 regulator-max-microvolt = <1200000>;
276 regulator-state-mem {
277 regulator-off-in-suspend;
282 regulator-name = "VCC_AP_1.8V";
283 regulator-min-microvolt = <1800000>;
284 regulator-max-microvolt = <1800000>;
287 regulator-state-mem {
288 regulator-off-in-suspend;
293 regulator-name = "VAP_AVDD_PLL1";
294 regulator-min-microvolt = <1800000>;
295 regulator-max-microvolt = <1800000>;
298 regulator-state-mem {
299 regulator-off-in-suspend;
304 regulator-name = "VAP_PLL_ISO_1.0V";
305 regulator-min-microvolt = <1000000>;
306 regulator-max-microvolt = <1000000>;
309 regulator-state-mem {
310 regulator-off-in-suspend;
315 regulator-name = "VAP_VMIPI_1.0V";
316 regulator-min-microvolt = <1000000>;
317 regulator-max-microvolt = <1000000>;
320 regulator-state-mem {
321 regulator-off-in-suspend;
326 regulator-name = "VAP_AVDD_1.8V";
327 regulator-min-microvolt = <1800000>;
328 regulator-max-microvolt = <1800000>;
331 regulator-state-mem {
332 regulator-off-in-suspend;
337 regulator-name = "VAP_USB_3.0V";
338 regulator-min-microvolt = <3000000>;
339 regulator-max-microvolt = <3000000>;
342 regulator-state-mem {
343 regulator-off-in-suspend;
348 regulator-name = "V_LPDDR_1.2V";
349 regulator-min-microvolt = <1200000>;
350 regulator-max-microvolt = <1200000>;
353 regulator-state-mem {
354 regulator-on-in-suspend;
359 regulator-name = "UNUSED_LDO10";
360 regulator-min-microvolt = <1000000>;
361 regulator-max-microvolt = <1000000>;
363 regulator-state-mem {
364 regulator-off-in-suspend;
369 regulator-name = "V_EMMC_1.8V";
370 regulator-min-microvolt = <1800000>;
371 regulator-max-microvolt = <1800000>;
372 samsung,ext-control-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
376 regulator-name = "V_EMMC_2.8V";
377 regulator-min-microvolt = <2800000>;
378 regulator-max-microvolt = <2800000>;
379 samsung,ext-control-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
383 regulator-name = "CAM_AVDD_2.8V";
384 regulator-min-microvolt = <2800000>;
385 regulator-max-microvolt = <2800000>;
387 regulator-state-mem {
388 regulator-off-in-suspend;
393 regulator-name = "UNUSED_LDO14";
394 regulator-min-microvolt = <2700000>;
395 regulator-max-microvolt = <2700000>;
397 regulator-state-mem {
398 regulator-off-in-suspend;
403 regulator-name = "TSP_AVDD_3.3V";
404 regulator-min-microvolt = <3300000>;
405 regulator-max-microvolt = <3300000>;
407 regulator-state-mem {
408 regulator-off-in-suspend;
413 regulator-name = "LCD_VDD_3.3V";
414 regulator-min-microvolt = <3300000>;
415 regulator-max-microvolt = <3300000>;
417 regulator-state-mem {
418 regulator-off-in-suspend;
423 regulator-name = "V_IRLED_3.3V";
424 regulator-min-microvolt = <3300000>;
425 regulator-max-microvolt = <3300000>;
427 regulator-state-mem {
428 regulator-off-in-suspend;
433 regulator-name = "CAM_AF_2.8V";
434 regulator-min-microvolt = <2800000>;
435 regulator-max-microvolt = <2800000>;
437 regulator-state-mem {
438 regulator-off-in-suspend;
443 regulator-name = "TSP_VDD_1.8V";
444 regulator-min-microvolt = <1800000>;
445 regulator-max-microvolt = <1800000>;
447 regulator-state-mem {
448 regulator-off-in-suspend;
453 regulator-name = "LCD_VDD_1.8V";
454 regulator-min-microvolt = <1800000>;
455 regulator-max-microvolt = <1800000>;
457 regulator-state-mem {
458 regulator-off-in-suspend;
463 regulator-name = "CAM_IO_1.8V";
464 regulator-min-microvolt = <1800000>;
465 regulator-max-microvolt = <1800000>;
467 regulator-state-mem {
468 regulator-off-in-suspend;
473 regulator-name = "CAM_DVDD_1.2V";
474 regulator-min-microvolt = <1200000>;
475 regulator-max-microvolt = <1200000>;
477 regulator-state-mem {
478 regulator-off-in-suspend;
483 regulator-name = "HRM_VCC_1.8V";
484 regulator-min-microvolt = <1800000>;
485 regulator-max-microvolt = <1800000>;
490 regulator-name = "HRM_VCC_3.3V";
491 regulator-min-microvolt = <3000000>;
492 regulator-max-microvolt = <3000000>;
494 regulator-state-mem {
495 regulator-off-in-suspend;
500 regulator-name = "UNUSED_LDO25";
501 regulator-min-microvolt = <3000000>;
502 regulator-max-microvolt = <3000000>;
504 regulator-state-mem {
505 regulator-off-in-suspend;
510 regulator-name = "VAP_MIF_1.0V";
511 regulator-min-microvolt = <800000>;
512 regulator-max-microvolt = <900000>;
515 regulator-state-mem {
516 regulator-off-in-suspend;
521 regulator-name = "VAP_ARM_1.0V";
522 regulator-min-microvolt = <850000>;
523 regulator-max-microvolt = <1150000>;
526 regulator-state-mem {
527 regulator-off-in-suspend;
532 regulator-name = "VAP_INT3D_1.0V";
533 regulator-min-microvolt = <850000>;
534 regulator-max-microvolt = <1000000>;
537 regulator-state-mem {
538 regulator-off-in-suspend;
543 regulator-name = "VCC_SUB_1.95V";
544 regulator-min-microvolt = <1950000>;
545 regulator-max-microvolt = <1950000>;
548 regulator-state-mem {
549 regulator-on-in-suspend;
554 regulator-name = "VCC_SUB_1.35V";
555 regulator-min-microvolt = <1350000>;
556 regulator-max-microvolt = <1350000>;
559 regulator-state-mem {
560 regulator-on-in-suspend;
568 #address-cells = <1>;
570 samsung,i2c-sda-delay = <100>;
571 samsung,i2c-slave-addr = <0x10>;
572 samsung,i2c-max-bus-freq = <400000>;
576 compatible = "maxim,max77836-battery";
577 interrupt-parent = <&gpx1>;
596 #address-cells = <1>;
604 card-detect-delay = <200>;
605 vmmc-supply = <&ldo12_reg>;
606 clock-frequency = <100000000>;
607 clock-freq-min-max = <400000 100000000>;
608 samsung,dw-mshc-ciu-div = <1>;
609 samsung,dw-mshc-sdr-timing = <0 1>;
610 samsung,dw-mshc-ddr-timing = <1 2>;
611 pinctrl-names = "default";
612 pinctrl-0 = <&sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8>;
618 assigned-clocks = <&cmu CLK_SCLK_UART0>;
619 assigned-clock-rates = <100000000>;
628 vtmu-supply = <&ldo7_reg>;
633 clocks = <&cmu CLK_RTC>, <&s2mps14_osc S2MPS11_CLK_AP>;
634 clock-names = "rtc", "rtc_src";
642 ppmu_dmc0_3: ppmu-event3-dmc0 {
643 event-name = "ppmu-event3-dmc0";
652 ppmu_dmc1_3: ppmu-event3-dmc1 {
653 event-name = "ppmu-event3-dmc1";
662 ppmu_leftbus_3: ppmu-event3-leftbus {
663 event-name = "ppmu-event3-leftbus";
672 ppmu_rightbus_3: ppmu-event3-rightbus {
673 event-name = "ppmu-event3-rightbus";
679 clock-frequency = <24000000>;
683 pinctrl-names = "default";
684 pinctrl-0 = <&sleep0>;
686 sleep0: sleep-state {
687 PIN_SLP(gpa0-0, INPUT, DOWN);
688 PIN_SLP(gpa0-1, INPUT, DOWN);
689 PIN_SLP(gpa0-2, INPUT, DOWN);
690 PIN_SLP(gpa0-3, INPUT, DOWN);
691 PIN_SLP(gpa0-4, INPUT, DOWN);
692 PIN_SLP(gpa0-5, INPUT, DOWN);
693 PIN_SLP(gpa0-6, INPUT, DOWN);
694 PIN_SLP(gpa0-7, INPUT, DOWN);
696 PIN_SLP(gpa1-0, INPUT, DOWN);
697 PIN_SLP(gpa1-1, INPUT, DOWN);
698 PIN_SLP(gpa1-2, INPUT, DOWN);
699 PIN_SLP(gpa1-3, INPUT, DOWN);
700 PIN_SLP(gpa1-4, INPUT, DOWN);
701 PIN_SLP(gpa1-5, INPUT, DOWN);
703 PIN_SLP(gpb-0, PREV, NONE);
704 PIN_SLP(gpb-1, PREV, NONE);
705 PIN_SLP(gpb-2, PREV, NONE);
706 PIN_SLP(gpb-3, PREV, NONE);
707 PIN_SLP(gpb-4, INPUT, DOWN);
708 PIN_SLP(gpb-5, INPUT, DOWN);
709 PIN_SLP(gpb-6, INPUT, DOWN);
710 PIN_SLP(gpb-7, INPUT, DOWN);
712 PIN_SLP(gpc0-0, INPUT, DOWN);
713 PIN_SLP(gpc0-1, INPUT, DOWN);
714 PIN_SLP(gpc0-2, INPUT, DOWN);
715 PIN_SLP(gpc0-3, INPUT, DOWN);
716 PIN_SLP(gpc0-4, INPUT, DOWN);
718 PIN_SLP(gpc1-0, INPUT, DOWN);
719 PIN_SLP(gpc1-1, INPUT, DOWN);
720 PIN_SLP(gpc1-2, INPUT, DOWN);
721 PIN_SLP(gpc1-3, INPUT, DOWN);
722 PIN_SLP(gpc1-4, INPUT, DOWN);
724 PIN_SLP(gpd0-0, INPUT, DOWN);
725 PIN_SLP(gpd0-1, INPUT, DOWN);
726 PIN_SLP(gpd0-2, INPUT, NONE);
727 PIN_SLP(gpd0-3, INPUT, NONE);
729 PIN_SLP(gpd1-0, INPUT, NONE);
730 PIN_SLP(gpd1-1, INPUT, NONE);
731 PIN_SLP(gpd1-2, INPUT, NONE);
732 PIN_SLP(gpd1-3, INPUT, NONE);
737 pinctrl-names = "default";
738 pinctrl-0 = <&sleep1>;
740 sleep1: sleep-state {
741 PIN_SLP(gpe0-0, PREV, NONE);
742 PIN_SLP(gpe0-1, PREV, NONE);
743 PIN_SLP(gpe0-2, INPUT, DOWN);
744 PIN_SLP(gpe0-3, INPUT, UP);
745 PIN_SLP(gpe0-4, INPUT, DOWN);
746 PIN_SLP(gpe0-5, INPUT, DOWN);
747 PIN_SLP(gpe0-6, INPUT, DOWN);
748 PIN_SLP(gpe0-7, INPUT, DOWN);
750 PIN_SLP(gpe1-0, INPUT, DOWN);
751 PIN_SLP(gpe1-1, PREV, NONE);
752 PIN_SLP(gpe1-2, INPUT, DOWN);
753 PIN_SLP(gpe1-3, INPUT, DOWN);
754 PIN_SLP(gpe1-4, INPUT, DOWN);
755 PIN_SLP(gpe1-5, INPUT, DOWN);
756 PIN_SLP(gpe1-6, INPUT, DOWN);
757 PIN_SLP(gpe1-7, INPUT, NONE);
759 PIN_SLP(gpe2-0, INPUT, NONE);
760 PIN_SLP(gpe2-1, INPUT, NONE);
761 PIN_SLP(gpe2-2, INPUT, NONE);
763 PIN_SLP(gpk0-0, INPUT, DOWN);
764 PIN_SLP(gpk0-1, INPUT, DOWN);
765 PIN_SLP(gpk0-2, OUT0, NONE);
766 PIN_SLP(gpk0-3, INPUT, DOWN);
767 PIN_SLP(gpk0-4, INPUT, DOWN);
768 PIN_SLP(gpk0-5, INPUT, DOWN);
769 PIN_SLP(gpk0-6, INPUT, DOWN);
770 PIN_SLP(gpk0-7, INPUT, DOWN);
772 PIN_SLP(gpk1-0, INPUT, DOWN);
773 PIN_SLP(gpk1-1, INPUT, DOWN);
774 PIN_SLP(gpk1-2, INPUT, DOWN);
775 PIN_SLP(gpk1-3, INPUT, DOWN);
776 PIN_SLP(gpk1-4, INPUT, DOWN);
777 PIN_SLP(gpk1-5, INPUT, DOWN);
778 PIN_SLP(gpk1-6, INPUT, DOWN);
780 PIN_SLP(gpk2-0, INPUT, DOWN);
781 PIN_SLP(gpk2-1, INPUT, DOWN);
782 PIN_SLP(gpk2-2, INPUT, DOWN);
783 PIN_SLP(gpk2-3, INPUT, DOWN);
784 PIN_SLP(gpk2-4, INPUT, DOWN);
785 PIN_SLP(gpk2-5, INPUT, DOWN);
786 PIN_SLP(gpk2-6, INPUT, DOWN);
788 PIN_SLP(gpl0-0, INPUT, DOWN);
789 PIN_SLP(gpl0-1, INPUT, DOWN);
790 PIN_SLP(gpl0-2, INPUT, DOWN);
791 PIN_SLP(gpl0-3, INPUT, DOWN);
793 PIN_SLP(gpm0-0, INPUT, DOWN);
794 PIN_SLP(gpm0-1, INPUT, DOWN);
795 PIN_SLP(gpm0-2, INPUT, DOWN);
796 PIN_SLP(gpm0-3, INPUT, DOWN);
797 PIN_SLP(gpm0-4, INPUT, DOWN);
798 PIN_SLP(gpm0-5, INPUT, DOWN);
799 PIN_SLP(gpm0-6, INPUT, DOWN);
800 PIN_SLP(gpm0-7, INPUT, DOWN);
802 PIN_SLP(gpm1-0, INPUT, DOWN);
803 PIN_SLP(gpm1-1, INPUT, DOWN);
804 PIN_SLP(gpm1-2, INPUT, DOWN);
805 PIN_SLP(gpm1-3, INPUT, DOWN);
806 PIN_SLP(gpm1-4, INPUT, DOWN);
807 PIN_SLP(gpm1-5, INPUT, DOWN);
808 PIN_SLP(gpm1-6, INPUT, DOWN);
810 PIN_SLP(gpm2-0, INPUT, DOWN);
811 PIN_SLP(gpm2-1, INPUT, DOWN);
812 PIN_SLP(gpm2-2, INPUT, DOWN);
813 PIN_SLP(gpm2-3, INPUT, DOWN);
814 PIN_SLP(gpm2-4, INPUT, DOWN);
816 PIN_SLP(gpm3-0, INPUT, DOWN);
817 PIN_SLP(gpm3-1, INPUT, DOWN);
818 PIN_SLP(gpm3-2, INPUT, DOWN);
819 PIN_SLP(gpm3-3, INPUT, DOWN);
820 PIN_SLP(gpm3-4, INPUT, DOWN);
821 PIN_SLP(gpm3-5, INPUT, DOWN);
822 PIN_SLP(gpm3-6, INPUT, DOWN);
823 PIN_SLP(gpm3-7, INPUT, DOWN);
825 PIN_SLP(gpm4-0, INPUT, DOWN);
826 PIN_SLP(gpm4-1, INPUT, DOWN);
827 PIN_SLP(gpm4-2, INPUT, DOWN);
828 PIN_SLP(gpm4-3, INPUT, DOWN);
829 PIN_SLP(gpm4-4, INPUT, DOWN);
830 PIN_SLP(gpm4-5, INPUT, DOWN);
831 PIN_SLP(gpm4-6, INPUT, DOWN);
832 PIN_SLP(gpm4-7, INPUT, DOWN);