mm: hugetlb: fix hugepage memory leak caused by wrong reserve count
[linux/fpc-iii.git] / arch / arm / boot / dts / exynos4210-origen.dts
blobb8f866991bdd4382f86e2d70c582bdbde66a7bd8
1 /*
2  * Samsung's Exynos4210 based Origen board device tree source
3  *
4  * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
5  *              http://www.samsung.com
6  * Copyright (c) 2010-2011 Linaro Ltd.
7  *              www.linaro.org
8  *
9  * Device tree source file for Insignal's Origen board which is based on
10  * Samsung's Exynos4210 SoC.
11  *
12  * This program is free software; you can redistribute it and/or modify
13  * it under the terms of the GNU General Public License version 2 as
14  * published by the Free Software Foundation.
17 /dts-v1/;
18 #include "exynos4210.dtsi"
19 #include <dt-bindings/gpio/gpio.h>
20 #include <dt-bindings/input/input.h>
22 / {
23         model = "Insignal Origen evaluation board based on Exynos4210";
24         compatible = "insignal,origen", "samsung,exynos4210", "samsung,exynos4";
26         memory {
27                 reg = <0x40000000 0x10000000
28                        0x50000000 0x10000000
29                        0x60000000 0x10000000
30                        0x70000000 0x10000000>;
31         };
33         chosen {
34                 bootargs ="root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC2,115200 init=/linuxrc";
35                 stdout-path = &serial_2;
36         };
38         regulators {
39                 compatible = "simple-bus";
40                 #address-cells = <1>;
41                 #size-cells = <0>;
43                 mmc_reg: regulator@0 {
44                         compatible = "regulator-fixed";
45                         reg = <0>;
46                         regulator-name = "VMEM_VDD_2.8V";
47                         regulator-min-microvolt = <2800000>;
48                         regulator-max-microvolt = <2800000>;
49                         gpio = <&gpx1 1 GPIO_ACTIVE_HIGH>;
50                         enable-active-high;
51                 };
52         };
54         gpio_keys {
55                 compatible = "gpio-keys";
56                 #address-cells = <1>;
57                 #size-cells = <0>;
59                 up {
60                         label = "Up";
61                         gpios = <&gpx2 0 GPIO_ACTIVE_LOW>;
62                         linux,code = <KEY_UP>;
63                         gpio-key,wakeup;
64                 };
66                 down {
67                         label = "Down";
68                         gpios = <&gpx2 1 GPIO_ACTIVE_LOW>;
69                         linux,code = <KEY_DOWN>;
70                         gpio-key,wakeup;
71                 };
73                 back {
74                         label = "Back";
75                         gpios = <&gpx1 7 GPIO_ACTIVE_LOW>;
76                         linux,code = <KEY_BACK>;
77                         gpio-key,wakeup;
78                 };
80                 home {
81                         label = "Home";
82                         gpios = <&gpx1 6 GPIO_ACTIVE_LOW>;
83                         linux,code = <KEY_HOME>;
84                         gpio-key,wakeup;
85                 };
87                 menu {
88                         label = "Menu";
89                         gpios = <&gpx1 5 GPIO_ACTIVE_LOW>;
90                         linux,code = <KEY_MENU>;
91                         gpio-key,wakeup;
92                 };
93         };
95         leds {
96                 compatible = "gpio-leds";
97                 status {
98                         gpios = <&gpx1 3 GPIO_ACTIVE_LOW>;
99                         linux,default-trigger = "heartbeat";
100                 };
101         };
103         fixed-rate-clocks {
104                 xxti {
105                         compatible = "samsung,clock-xxti";
106                         clock-frequency = <0>;
107                 };
109                 xusbxti {
110                         compatible = "samsung,clock-xusbxti";
111                         clock-frequency = <24000000>;
112                 };
113         };
115         display-timings {
116                 native-mode = <&timing0>;
117                 timing0: timing {
118                         clock-frequency = <47500000>;
119                         hactive = <1024>;
120                         vactive = <600>;
121                         hfront-porch = <64>;
122                         hback-porch = <16>;
123                         hsync-len = <48>;
124                         vback-porch = <64>;
125                         vfront-porch = <16>;
126                         vsync-len = <3>;
127                 };
128         };
131 &cpu0 {
132         cpu0-supply = <&buck1_reg>;
135 &fimd {
136         pinctrl-0 = <&lcd_en &lcd_clk &lcd_data24 &pwm0_out>;
137         pinctrl-names = "default";
138         status = "okay";
141 &g2d {
142         status = "okay";
145 &i2c_0 {
146         status = "okay";
147         samsung,i2c-sda-delay = <100>;
148         samsung,i2c-max-bus-freq = <20000>;
149         pinctrl-0 = <&i2c0_bus>;
150         pinctrl-names = "default";
152         max8997_pmic@66 {
153                 compatible = "maxim,max8997-pmic";
154                 reg = <0x66>;
155                 interrupt-parent = <&gpx0>;
156                 interrupts = <4 0>, <3 0>;
158                 max8997,pmic-buck1-dvs-voltage = <1350000>;
159                 max8997,pmic-buck2-dvs-voltage = <1100000>;
160                 max8997,pmic-buck5-dvs-voltage = <1200000>;
162                 regulators {
163                         ldo1_reg: LDO1 {
164                                 regulator-name = "VDD_ABB_3.3V";
165                                 regulator-min-microvolt = <3300000>;
166                                 regulator-max-microvolt = <3300000>;
167                         };
169                         ldo2_reg: LDO2 {
170                                 regulator-name = "VDD_ALIVE_1.1V";
171                                 regulator-min-microvolt = <1100000>;
172                                 regulator-max-microvolt = <1100000>;
173                                 regulator-always-on;
174                         };
176                         ldo3_reg: LDO3 {
177                                 regulator-name = "VMIPI_1.1V";
178                                 regulator-min-microvolt = <1100000>;
179                                 regulator-max-microvolt = <1100000>;
180                         };
182                         ldo4_reg: LDO4 {
183                                 regulator-name = "VDD_RTC_1.8V";
184                                 regulator-min-microvolt = <1800000>;
185                                 regulator-max-microvolt = <1800000>;
186                                 regulator-always-on;
187                         };
189                         ldo6_reg: LDO6 {
190                                 regulator-name = "VMIPI_1.8V";
191                                 regulator-min-microvolt = <1800000>;
192                                 regulator-max-microvolt = <1800000>;
193                                 regulator-always-on;
194                         };
196                         ldo7_reg: LDO7 {
197                                 regulator-name = "VDD_AUD_1.8V";
198                                 regulator-min-microvolt = <1800000>;
199                                 regulator-max-microvolt = <1800000>;
200                         };
202                         ldo8_reg: LDO8 {
203                                 regulator-name = "VADC_3.3V";
204                                 regulator-min-microvolt = <3300000>;
205                                 regulator-max-microvolt = <3300000>;
206                         };
208                         ldo9_reg: LDO9 {
209                                 regulator-name = "DVDD_SWB_2.8V";
210                                 regulator-min-microvolt = <2800000>;
211                                 regulator-max-microvolt = <2800000>;
212                                 regulator-always-on;
213                         };
215                         ldo10_reg: LDO10 {
216                                 regulator-name = "VDD_PLL_1.1V";
217                                 regulator-min-microvolt = <1100000>;
218                                 regulator-max-microvolt = <1100000>;
219                                 regulator-always-on;
220                         };
222                         ldo11_reg: LDO11 {
223                                 regulator-name = "VDD_AUD_3V";
224                                 regulator-min-microvolt = <3000000>;
225                                 regulator-max-microvolt = <3000000>;
226                         };
228                         ldo14_reg: LDO14 {
229                                 regulator-name = "AVDD18_SWB_1.8V";
230                                 regulator-min-microvolt = <1800000>;
231                                 regulator-max-microvolt = <1800000>;
232                                 regulator-always-on;
233                         };
235                         ldo17_reg: LDO17 {
236                                 regulator-name = "VDD_SWB_3.3V";
237                                 regulator-min-microvolt = <3300000>;
238                                 regulator-max-microvolt = <3300000>;
239                                 regulator-always-on;
240                         };
242                         ldo21_reg: LDO21 {
243                                 regulator-name = "VDD_MIF_1.2V";
244                                 regulator-min-microvolt = <1200000>;
245                                 regulator-max-microvolt = <1200000>;
246                                 regulator-always-on;
247                         };
249                         buck1_reg: BUCK1 {
250                                 /*
251                                 * HACK: The real name is VDD_ARM_1.2V,
252                                 * but exynos-cpufreq does not support
253                                 * DT-based regulator lookup yet.
254                                 */
255                                 regulator-name = "vdd_arm";
256                                 regulator-min-microvolt = <950000>;
257                                 regulator-max-microvolt = <1350000>;
258                                 regulator-always-on;
259                                 regulator-boot-on;
260                         };
262                         buck2_reg: BUCK2 {
263                                 regulator-name = "VDD_INT_1.1V";
264                                 regulator-min-microvolt = <900000>;
265                                 regulator-max-microvolt = <1100000>;
266                                 regulator-always-on;
267                                 regulator-boot-on;
268                         };
270                         buck3_reg: BUCK3 {
271                                 regulator-name = "VDD_G3D_1.1V";
272                                 regulator-min-microvolt = <900000>;
273                                 regulator-max-microvolt = <1100000>;
274                         };
276                         buck5_reg: BUCK5 {
277                                 regulator-name = "VDDQ_M1M2_1.2V";
278                                 regulator-min-microvolt = <1200000>;
279                                 regulator-max-microvolt = <1200000>;
280                                 regulator-always-on;
281                         };
283                         buck7_reg: BUCK7 {
284                                 regulator-name = "VDD_LCD_3.3V";
285                                 regulator-min-microvolt = <3300000>;
286                                 regulator-max-microvolt = <3300000>;
287                                 regulator-boot-on;
288                                 regulator-always-on;
289                         };
290                 };
291         };
294 &mfc {
295         samsung,mfc-r = <0x43000000 0x800000>;
296         samsung,mfc-l = <0x51000000 0x800000>;
297         status = "okay";
300 &sdhci_0 {
301         bus-width = <4>;
302         pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_cd>;
303         pinctrl-names = "default";
304         vmmc-supply = <&mmc_reg>;
305         status = "okay";
308 &sdhci_2 {
309         bus-width = <4>;
310         pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sd2_cd>;
311         pinctrl-names = "default";
312         vmmc-supply = <&mmc_reg>;
313         status = "okay";
316 &serial_0 {
317         status = "okay";
320 &serial_1 {
321         status = "okay";
324 &serial_2 {
325         status = "okay";
328 &serial_3 {
329         status = "okay";
332 &rtc {
333         status = "okay";
336 &tmu {
337         status = "okay";
340 &watchdog {
341         status = "okay";