arch/arm/boot/dts/exynos4412-trats2.dts

   1 /*
   2  * Samsung's Exynos4412 based Trats 2 board device tree source
   3  *
   4  * Copyright (c) 2013 Samsung Electronics Co., Ltd.
   5  *              http://www.samsung.com
   6  *
   7  * Device tree source file for Samsung's Trats 2 board which is based on
   8  * Samsung's Exynos4412 SoC.
   9  *
  10  * This program is free software; you can redistribute it and/or modify
  11  * it under the terms of the GNU General Public License version 2 as
  12  * published by the Free Software Foundation.
  13 */
  14
  15 /dts-v1/;
  16 #include "exynos4412.dtsi"
  17 #include <dt-bindings/gpio/gpio.h>
  18 #include <dt-bindings/interrupt-controller/irq.h>
  19 #include <dt-bindings/clock/maxim,max77686.h>
  20
  21 / {
  22         model = "Samsung Trats 2 based on Exynos4412";
  23         compatible = "samsung,trats2", "samsung,exynos4412", "samsung,exynos4";
  24
  25         aliases {
  26                 i2c9 = &i2c_ak8975;
  27                 i2c10 = &i2c_cm36651;
  28                 i2c11 = &i2c_max77693;
  29                 i2c12 = &i2c_max77693_fuel;
  30         };
  31
  32         memory {
  33                 reg =  <0x40000000 0x40000000>;
  34         };
  35
  36         chosen {
  37                 bootargs = "console=ttySAC2,115200N8 root=/dev/mmcblk0p5 rootwait earlyprintk panic=5";
  38                 stdout-path = &serial_2;
  39         };
  40
  41         firmware@0204F000 {
  42                 compatible = "samsung,secure-firmware";
  43                 reg = <0x0204F000 0x1000>;
  44         };
  45
  46         fixed-rate-clocks {
  47                 xxti {
  48                         compatible = "samsung,clock-xxti", "fixed-clock";
  49                         clock-frequency = <0>;
  50                 };
  51
  52                 xusbxti {
  53                         compatible = "samsung,clock-xusbxti", "fixed-clock";
  54                         clock-frequency = <24000000>;
  55                 };
  56         };
  57
  58         regulators {
  59                 compatible = "simple-bus";
  60                 #address-cells = <1>;
  61                 #size-cells = <0>;
  62
  63                 cam_io_reg: voltage-regulator-1 {
  64                         compatible = "regulator-fixed";
  65                         regulator-name = "CAM_SENSOR_A";
  66                         regulator-min-microvolt = <2800000>;
  67                         regulator-max-microvolt = <2800000>;
  68                         gpio = <&gpm0 2 GPIO_ACTIVE_HIGH>;
  69                         enable-active-high;
  70                 };
  71
  72                 lcd_vdd3_reg: voltage-regulator-2 {
  73                         compatible = "regulator-fixed";
  74                         regulator-name = "LCD_VDD_2.2V";
  75                         regulator-min-microvolt = <2200000>;
  76                         regulator-max-microvolt = <2200000>;
  77                         gpio = <&gpc0 1 GPIO_ACTIVE_HIGH>;
  78                         enable-active-high;
  79                 };
  80
  81                 cam_af_reg: voltage-regulator-3 {
  82                         compatible = "regulator-fixed";
  83                         regulator-name = "CAM_AF";
  84                         regulator-min-microvolt = <2800000>;
  85                         regulator-max-microvolt = <2800000>;
  86                         gpio = <&gpm0 4 GPIO_ACTIVE_HIGH>;
  87                         enable-active-high;
  88                 };
  89
  90                 ps_als_reg: voltage-regulator-5 {
  91                         compatible = "regulator-fixed";
  92                         regulator-name = "LED_A_3.0V";
  93                         regulator-min-microvolt = <3000000>;
  94                         regulator-max-microvolt = <3000000>;
  95                         gpio = <&gpj0 5 GPIO_ACTIVE_HIGH>;
  96                         enable-active-high;
  97                 };
  98         };
  99
 100         gpio-keys {
 101                 compatible = "gpio-keys";
 102
 103                 key-down {
 104                         gpios = <&gpx3 3 GPIO_ACTIVE_LOW>;
 105                         linux,code = <114>;
 106                         label = "volume down";
 107                         debounce-interval = <10>;
 108                 };
 109
 110                 key-up {
 111                         gpios = <&gpx2 2 GPIO_ACTIVE_LOW>;
 112                         linux,code = <115>;
 113                         label = "volume up";
 114                         debounce-interval = <10>;
 115                 };
 116
 117                 key-power {
 118                         gpios = <&gpx2 7 GPIO_ACTIVE_LOW>;
 119                         linux,code = <116>;
 120                         label = "power";
 121                         debounce-interval = <10>;
 122                         gpio-key,wakeup;
 123                 };
 124
 125                 key-ok {
 126                         gpios = <&gpx0 1 GPIO_ACTIVE_LOW>;
 127                         linux,code = <139>;
 128                         label = "ok";
 129                         debounce-inteval = <10>;
 130                         gpio-key,wakeup;
 131                 };
 132         };
 133
 134         i2c_max77693: i2c-gpio-1 {
 135                 compatible = "i2c-gpio";
 136                 gpios = <&gpm2 0 GPIO_ACTIVE_HIGH>, <&gpm2 1 GPIO_ACTIVE_HIGH>;
 137                 i2c-gpio,delay-us = <2>;
 138                 #address-cells = <1>;
 139                 #size-cells = <0>;
 140                 status = "okay";
 141
 142                 max77693@66 {
 143                         compatible = "maxim,max77693";
 144                         interrupt-parent = <&gpx1>;
 145                         interrupts = <5 2>;
 146                         reg = <0x66>;
 147
 148                         regulators {
 149                                 esafeout1_reg: ESAFEOUT1@1 {
 150                                         regulator-name = "ESAFEOUT1";
 151                                 };
 152                                 esafeout2_reg: ESAFEOUT2@2 {
 153                                         regulator-name = "ESAFEOUT2";
 154                                 };
 155                                 charger_reg: CHARGER@0 {
 156                                         regulator-name = "CHARGER";
 157                                         regulator-min-microamp = <60000>;
 158                                         regulator-max-microamp = <2580000>;
 159                                 };
 160                         };
 161
 162                         max77693_haptic {
 163                                 compatible = "maxim,max77693-haptic";
 164                                 haptic-supply = <&ldo26_reg>;
 165                                 pwms = <&pwm 0 38022 0>;
 166                         };
 167
 168                         charger {
 169                                 compatible = "maxim,max77693-charger";
 170
 171                                 maxim,constant-microvolt = <4350000>;
 172                                 maxim,min-system-microvolt = <3600000>;
 173                                 maxim,thermal-regulation-celsius = <100>;
 174                                 maxim,battery-overcurrent-microamp = <3500000>;
 175                                 maxim,charge-input-threshold-microvolt = <4300000>;
 176                         };
 177                 };
 178         };
 179
 180         i2c_max77693_fuel: i2c-gpio-3 {
 181                 compatible = "i2c-gpio";
 182                 gpios = <&gpf1 5 GPIO_ACTIVE_HIGH>, <&gpf1 4 GPIO_ACTIVE_HIGH>;
 183                 i2c-gpio,delay-us = <2>;
 184                 #address-cells = <1>;
 185                 #size-cells = <0>;
 186                 status = "okay";
 187
 188                 max77693-fuel-gauge@36 {
 189                         compatible = "maxim,max17047";
 190                         interrupt-parent = <&gpx2>;
 191                         interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
 192                         reg = <0x36>;
 193
 194                         maxim,over-heat-temp = <700>;
 195                         maxim,over-volt = <4500>;
 196                 };
 197         };
 198
 199         i2c_ak8975: i2c-gpio-0 {
 200                 compatible = "i2c-gpio";
 201                 gpios = <&gpy2 4 GPIO_ACTIVE_HIGH>, <&gpy2 5 GPIO_ACTIVE_HIGH>;
 202                 i2c-gpio,delay-us = <2>;
 203                 #address-cells = <1>;
 204                 #size-cells = <0>;
 205                 status = "okay";
 206
 207                 ak8975@0c {
 208                         compatible = "asahi-kasei,ak8975";
 209                         reg = <0x0c>;
 210                         gpios = <&gpj0 7 GPIO_ACTIVE_HIGH>;
 211                 };
 212         };
 213
 214         i2c_cm36651: i2c-gpio-2 {
 215                 compatible = "i2c-gpio";
 216                 gpios = <&gpf0 0 GPIO_ACTIVE_LOW>, <&gpf0 1 GPIO_ACTIVE_LOW>;
 217                 i2c-gpio,delay-us = <2>;
 218                 #address-cells = <1>;
 219                 #size-cells = <0>;
 220
 221                 cm36651@18 {
 222                         compatible = "capella,cm36651";
 223                         reg = <0x18>;
 224                         interrupt-parent = <&gpx0>;
 225                         interrupts = <2 2>;
 226                         vled-supply = <&ps_als_reg>;
 227                 };
 228         };
 229
 230         camera: camera {
 231                 pinctrl-0 = <&cam_port_a_clk_active &cam_port_b_clk_active>;
 232                 pinctrl-names = "default";
 233                 status = "okay";
 234                 assigned-clocks = <&clock CLK_MOUT_CAM0>,
 235                                   <&clock CLK_MOUT_CAM1>;
 236                 assigned-clock-parents = <&clock CLK_XUSBXTI>,
 237                                          <&clock CLK_XUSBXTI>;
 238
 239
 240         };
 241
 242         sound {
 243                 compatible = "samsung,trats2-audio";
 244                 samsung,i2s-controller = <&i2s0>;
 245                 samsung,model = "Trats2";
 246                 samsung,audio-codec = <&wm1811>;
 247                 samsung,audio-routing =
 248                         "SPK", "SPKOUTLN",
 249                         "SPK", "SPKOUTLP",
 250                         "SPK", "SPKOUTRN",
 251                         "SPK", "SPKOUTRP";
 252         };
 253
 254         thermistor-ap@0 {
 255                 compatible = "ntc,ncp15wb473";
 256                 pullup-uv = <1800000>;   /* VCC_1.8V_AP */
 257                 pullup-ohm = <100000>;   /* 100K */
 258                 pulldown-ohm = <100000>; /* 100K */
 259                 io-channels = <&adc 1>;  /* AP temperature */
 260         };
 261
 262         thermistor-battery@1 {
 263                 compatible = "ntc,ncp15wb473";
 264                 pullup-uv = <1800000>;   /* VCC_1.8V_AP */
 265                 pullup-ohm = <100000>;   /* 100K */
 266                 pulldown-ohm = <100000>; /* 100K */
 267                 io-channels = <&adc 2>;  /* Battery temperature */
 268         };
 269
 270         thermal-zones {
 271                 cpu_thermal: cpu-thermal {
 272                         cooling-maps {
 273                                 map0 {
 274                                      /* Corresponds to 800MHz at freq_table */
 275                                      cooling-device = <&cpu0 7 7>;
 276                                 };
 277                                 map1 {
 278                                      /* Corresponds to 200MHz at freq_table */
 279                                      cooling-device = <&cpu0 13 13>;
 280                                };
 281                        };
 282                 };
 283         };
 284 };
 285
 286 &adc {
 287         vdd-supply = <&ldo3_reg>;
 288         status = "okay";
 289 };
 290
 291 &cpu0 {
 292         cpu0-supply = <&buck2_reg>;
 293 };
 294
 295 &csis_0 {
 296         status = "okay";
 297         vddcore-supply = <&ldo8_reg>;
 298         vddio-supply = <&ldo10_reg>;
 299         assigned-clocks = <&clock CLK_MOUT_CSIS0>,
 300                         <&clock CLK_SCLK_CSIS0>;
 301         assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
 302         assigned-clock-rates = <0>, <176000000>;
 303
 304         /* Camera C (3) MIPI CSI-2 (CSIS0) */
 305         port@3 {
 306                 reg = <3>;
 307                 csis0_ep: endpoint {
 308                         remote-endpoint = <&s5c73m3_ep>;
 309                         data-lanes = <1 2 3 4>;
 310                         samsung,csis-hs-settle = <12>;
 311                 };
 312         };
 313 };
 314
 315 &csis_1 {
 316         status = "okay";
 317         vddcore-supply = <&ldo8_reg>;
 318         vddio-supply = <&ldo10_reg>;
 319         assigned-clocks = <&clock CLK_MOUT_CSIS1>,
 320                         <&clock CLK_SCLK_CSIS1>;
 321         assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
 322         assigned-clock-rates = <0>, <176000000>;
 323
 324         /* Camera D (4) MIPI CSI-2 (CSIS1) */
 325         port@4 {
 326                 reg = <4>;
 327                 csis1_ep: endpoint {
 328                         remote-endpoint = <&is_s5k6a3_ep>;
 329                         data-lanes = <1>;
 330                         samsung,csis-hs-settle = <18>;
 331                         samsung,csis-wclk;
 332                 };
 333         };
 334 };
 335
 336 &dsi_0 {
 337         vddcore-supply = <&ldo8_reg>;
 338         vddio-supply = <&ldo10_reg>;
 339         samsung,pll-clock-frequency = <24000000>;
 340         status = "okay";
 341
 342         ports {
 343                 #address-cells = <1>;
 344                 #size-cells = <0>;
 345
 346                 port@1 {
 347                         reg = <1>;
 348
 349                         dsi_out: endpoint {
 350                                 remote-endpoint = <&dsi_in>;
 351                                 samsung,burst-clock-frequency = <500000000>;
 352                                 samsung,esc-clock-frequency = <20000000>;
 353                         };
 354                 };
 355         };
 356
 357         panel@0 {
 358                 compatible = "samsung,s6e8aa0";
 359                 reg = <0>;
 360                 vdd3-supply = <&lcd_vdd3_reg>;
 361                 vci-supply = <&ldo25_reg>;
 362                 reset-gpios = <&gpy4 5 GPIO_ACTIVE_HIGH>;
 363                 power-on-delay= <50>;
 364                 reset-delay = <100>;
 365                 init-delay = <100>;
 366                 flip-horizontal;
 367                 flip-vertical;
 368                 panel-width-mm = <58>;
 369                 panel-height-mm = <103>;
 370
 371                 display-timings {
 372                         timing-0 {
 373                                 clock-frequency = <57153600>;
 374                                 hactive = <720>;
 375                                 vactive = <1280>;
 376                                 hfront-porch = <5>;
 377                                 hback-porch = <5>;
 378                                 hsync-len = <5>;
 379                                 vfront-porch = <13>;
 380                                 vback-porch = <1>;
 381                                 vsync-len = <2>;
 382                         };
 383                 };
 384
 385                 port {
 386                         dsi_in: endpoint {
 387                                 remote-endpoint = <&dsi_out>;
 388                         };
 389                 };
 390         };
 391 };
 392
 393 &exynos_usbphy {
 394         vbus-supply = <&esafeout1_reg>;
 395         status = "okay";
 396 };
 397
 398 &fimc_0 {
 399         status = "okay";
 400         assigned-clocks = <&clock CLK_MOUT_FIMC0>,
 401                         <&clock CLK_SCLK_FIMC0>;
 402         assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
 403         assigned-clock-rates = <0>, <176000000>;
 404 };
 405
 406 &fimc_1 {
 407         status = "okay";
 408         assigned-clocks = <&clock CLK_MOUT_FIMC1>,
 409                         <&clock CLK_SCLK_FIMC1>;
 410         assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
 411         assigned-clock-rates = <0>, <176000000>;
 412 };
 413
 414 &fimc_2 {
 415         status = "okay";
 416         assigned-clocks = <&clock CLK_MOUT_FIMC2>,
 417                         <&clock CLK_SCLK_FIMC2>;
 418         assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
 419         assigned-clock-rates = <0>, <176000000>;
 420 };
 421
 422 &fimc_3 {
 423         status = "okay";
 424         assigned-clocks = <&clock CLK_MOUT_FIMC3>,
 425                         <&clock CLK_SCLK_FIMC3>;
 426         assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
 427         assigned-clock-rates = <0>, <176000000>;
 428 };
 429
 430 &fimc_is {
 431         pinctrl-0 = <&fimc_is_uart>;
 432         pinctrl-names = "default";
 433         status = "okay";
 434
 435         i2c1_isp: i2c-isp@12140000 {
 436                 pinctrl-0 = <&fimc_is_i2c1>;
 437                 pinctrl-names = "default";
 438
 439                 s5k6a3@10 {
 440                         compatible = "samsung,s5k6a3";
 441                         reg = <0x10>;
 442                         svdda-supply = <&cam_io_reg>;
 443                         svddio-supply = <&ldo19_reg>;
 444                         afvdd-supply = <&ldo19_reg>;
 445                         clock-frequency = <24000000>;
 446                         /* CAM_B_CLKOUT */
 447                         clocks = <&camera 1>;
 448                         clock-names = "extclk";
 449                         samsung,camclk-out = <1>;
 450                         gpios = <&gpm1 6 GPIO_ACTIVE_HIGH>;
 451
 452                         port {
 453                                 is_s5k6a3_ep: endpoint {
 454                                         remote-endpoint = <&csis1_ep>;
 455                                         data-lanes = <1>;
 456                                 };
 457                         };
 458                 };
 459         };
 460 };
 461
 462 &fimc_lite_0 {
 463         status = "okay";
 464 };
 465
 466 &fimc_lite_1 {
 467         status = "okay";
 468 };
 469
 470 &fimd {
 471         status = "okay";
 472 };
 473
 474 &hsotg {
 475         vusb_d-supply = <&ldo15_reg>;
 476         vusb_a-supply = <&ldo12_reg>;
 477         dr_mode = "peripheral";
 478         status = "okay";
 479 };
 480
 481 &i2c_0 {
 482         samsung,i2c-sda-delay = <100>;
 483         samsung,i2c-slave-addr = <0x10>;
 484         samsung,i2c-max-bus-freq = <400000>;
 485         pinctrl-0 = <&i2c0_bus>;
 486         pinctrl-names = "default";
 487         status = "okay";
 488
 489         s5c73m3@3c {
 490                 compatible = "samsung,s5c73m3";
 491                 reg = <0x3c>;
 492                 standby-gpios = <&gpm0 1 GPIO_ACTIVE_LOW>;   /* ISP_STANDBY */
 493                 xshutdown-gpios = <&gpf1 3 GPIO_ACTIVE_LOW>; /* ISP_RESET */
 494                 vdd-int-supply = <&buck9_reg>;
 495                 vddio-cis-supply = <&ldo9_reg>;
 496                 vdda-supply = <&ldo17_reg>;
 497                 vddio-host-supply = <&ldo18_reg>;
 498                 vdd-af-supply = <&cam_af_reg>;
 499                 vdd-reg-supply = <&cam_io_reg>;
 500                 clock-frequency = <24000000>;
 501                 /* CAM_A_CLKOUT */
 502                 clocks = <&camera 0>;
 503                 clock-names = "cis_extclk";
 504                 port {
 505                         s5c73m3_ep: endpoint {
 506                                 remote-endpoint = <&csis0_ep>;
 507                                 data-lanes = <1 2 3 4>;
 508                         };
 509                 };
 510         };
 511 };
 512
 513 &i2c_3 {
 514         samsung,i2c-sda-delay = <100>;
 515         samsung,i2c-slave-addr = <0x10>;
 516         samsung,i2c-max-bus-freq = <400000>;
 517         pinctrl-0 = <&i2c3_bus>;
 518         pinctrl-names = "default";
 519         status = "okay";
 520
 521         mms114-touchscreen@48 {
 522                 compatible = "melfas,mms114";
 523                 reg = <0x48>;
 524                 interrupt-parent = <&gpm2>;
 525                 interrupts = <3 2>;
 526                 x-size = <720>;
 527                 y-size = <1280>;
 528                 avdd-supply = <&ldo23_reg>;
 529                 vdd-supply = <&ldo24_reg>;
 530         };
 531 };
 532
 533 &i2c_4 {
 534         samsung,i2c-sda-delay = <100>;
 535         samsung,i2c-slave-addr = <0x10>;
 536         samsung,i2c-max-bus-freq = <100000>;
 537         pinctrl-0 = <&i2c4_bus>;
 538         pinctrl-names = "default";
 539         status = "okay";
 540
 541         wm1811: wm1811@1a {
 542                 compatible = "wlf,wm1811";
 543                 reg = <0x1a>;
 544                 clocks = <&pmu_system_controller 0>;
 545                 clock-names = "MCLK1";
 546                 DCVDD-supply = <&ldo3_reg>;
 547                 DBVDD1-supply = <&ldo3_reg>;
 548                 wlf,ldo1ena = <&gpj0 4 0>;
 549         };
 550 };
 551
 552 &i2c_7 {
 553         samsung,i2c-sda-delay = <100>;
 554         samsung,i2c-slave-addr = <0x10>;
 555         samsung,i2c-max-bus-freq = <100000>;
 556         pinctrl-0 = <&i2c7_bus>;
 557         pinctrl-names = "default";
 558         status = "okay";
 559
 560         max77686: max77686_pmic@09 {
 561                 compatible = "maxim,max77686";
 562                 interrupt-parent = <&gpx0>;
 563                 interrupts = <7 0>;
 564                 reg = <0x09>;
 565                 #clock-cells = <1>;
 566
 567                 voltage-regulators {
 568                         ldo1_reg: LDO1 {
 569                                 regulator-name = "VALIVE_1.0V_AP";
 570                                 regulator-min-microvolt = <1000000>;
 571                                 regulator-max-microvolt = <1000000>;
 572                                 regulator-always-on;
 573                         };
 574
 575                         ldo2_reg: LDO2 {
 576                                 regulator-name = "VM1M2_1.2V_AP";
 577                                 regulator-min-microvolt = <1200000>;
 578                                 regulator-max-microvolt = <1200000>;
 579                                 regulator-always-on;
 580                                 regulator-state-mem {
 581                                         regulator-on-in-suspend;
 582                                 };
 583                         };
 584
 585                         ldo3_reg: LDO3 {
 586                                 regulator-name = "VCC_1.8V_AP";
 587                                 regulator-min-microvolt = <1800000>;
 588                                 regulator-max-microvolt = <1800000>;
 589                                 regulator-always-on;
 590                         };
 591
 592                         ldo4_reg: LDO4 {
 593                                 regulator-name = "VCC_2.8V_AP";
 594                                 regulator-min-microvolt = <2800000>;
 595                                 regulator-max-microvolt = <2800000>;
 596                                 regulator-always-on;
 597                         };
 598
 599                         ldo5_reg: LDO5 {
 600                                 regulator-name = "VCC_1.8V_IO";
 601                                 regulator-min-microvolt = <1800000>;
 602                                 regulator-max-microvolt = <1800000>;
 603                                 regulator-always-on;
 604                         };
 605
 606                         ldo6_reg: LDO6 {
 607                                 regulator-name = "VMPLL_1.0V_AP";
 608                                 regulator-min-microvolt = <1000000>;
 609                                 regulator-max-microvolt = <1000000>;
 610                                 regulator-always-on;
 611                                 regulator-state-mem {
 612                                         regulator-on-in-suspend;
 613                                 };
 614                         };
 615
 616                         ldo7_reg: LDO7 {
 617                                 regulator-name = "VPLL_1.0V_AP";
 618                                 regulator-min-microvolt = <1000000>;
 619                                 regulator-max-microvolt = <1000000>;
 620                                 regulator-always-on;
 621                                 regulator-state-mem {
 622                                         regulator-on-in-suspend;
 623                                 };
 624                         };
 625
 626                         ldo8_reg: LDO8 {
 627                                 regulator-name = "VMIPI_1.0V";
 628                                 regulator-min-microvolt = <1000000>;
 629                                 regulator-max-microvolt = <1000000>;
 630                                 regulator-state-mem {
 631                                         regulator-off-in-suspend;
 632                                 };
 633                         };
 634
 635                         ldo9_reg: LDO9 {
 636                                 regulator-name = "CAM_ISP_MIPI_1.2V";
 637                                 regulator-min-microvolt = <1200000>;
 638                                 regulator-max-microvolt = <1200000>;
 639                         };
 640
 641                         ldo10_reg: LDO10 {
 642                                 regulator-name = "VMIPI_1.8V";
 643                                 regulator-min-microvolt = <1800000>;
 644                                 regulator-max-microvolt = <1800000>;
 645                                 regulator-state-mem {
 646                                         regulator-off-in-suspend;
 647                                 };
 648                         };
 649
 650                         ldo11_reg: LDO11 {
 651                                 regulator-name = "VABB1_1.95V";
 652                                 regulator-min-microvolt = <1950000>;
 653                                 regulator-max-microvolt = <1950000>;
 654                                 regulator-always-on;
 655                                 regulator-state-mem {
 656                                         regulator-off-in-suspend;
 657                                 };
 658                         };
 659
 660                         ldo12_reg: LDO12 {
 661                                 regulator-name = "VUOTG_3.0V";
 662                                 regulator-min-microvolt = <3000000>;
 663                                 regulator-max-microvolt = <3000000>;
 664                                 regulator-state-mem {
 665                                         regulator-off-in-suspend;
 666                                 };
 667                         };
 668
 669                         ldo13_reg: LDO13 {
 670                                 regulator-name = "NFC_AVDD_1.8V";
 671                                 regulator-min-microvolt = <1800000>;
 672                                 regulator-max-microvolt = <1800000>;
 673                         };
 674
 675                         ldo14_reg: LDO14 {
 676                                 regulator-name = "VABB2_1.95V";
 677                                 regulator-min-microvolt = <1950000>;
 678                                 regulator-max-microvolt = <1950000>;
 679                                 regulator-always-on;
 680                                 regulator-state-mem {
 681                                         regulator-off-in-suspend;
 682                                 };
 683                         };
 684
 685                         ldo15_reg: LDO15 {
 686                                 regulator-name = "VHSIC_1.0V";
 687                                 regulator-min-microvolt = <1000000>;
 688                                 regulator-max-microvolt = <1000000>;
 689                                 regulator-state-mem {
 690                                         regulator-on-in-suspend;
 691                                 };
 692                         };
 693
 694                         ldo16_reg: LDO16 {
 695                                 regulator-name = "VHSIC_1.8V";
 696                                 regulator-min-microvolt = <1800000>;
 697                                 regulator-max-microvolt = <1800000>;
 698                                 regulator-state-mem {
 699                                         regulator-on-in-suspend;
 700                                 };
 701                         };
 702
 703                         ldo17_reg: LDO17 {
 704                                 regulator-name = "CAM_SENSOR_CORE_1.2V";
 705                                 regulator-min-microvolt = <1200000>;
 706                                 regulator-max-microvolt = <1200000>;
 707                         };
 708
 709                         ldo18_reg: LDO18 {
 710                                 regulator-name = "CAM_ISP_SEN_IO_1.8V";
 711                                 regulator-min-microvolt = <1800000>;
 712                                 regulator-max-microvolt = <1800000>;
 713                         };
 714
 715                         ldo19_reg: LDO19 {
 716                                 regulator-name = "VT_CAM_1.8V";
 717                                 regulator-min-microvolt = <1800000>;
 718                                 regulator-max-microvolt = <1800000>;
 719                         };
 720
 721                         ldo20_reg: LDO20 {
 722                                 regulator-name = "VDDQ_PRE_1.8V";
 723                                 regulator-min-microvolt = <1800000>;
 724                                 regulator-max-microvolt = <1800000>;
 725                         };
 726
 727                         ldo21_reg: LDO21 {
 728                                 regulator-name = "VTF_2.8V";
 729                                 regulator-min-microvolt = <2800000>;
 730                                 regulator-max-microvolt = <2800000>;
 731                                 maxim,ena-gpios = <&gpy2 0 GPIO_ACTIVE_HIGH>;
 732                         };
 733
 734                         ldo22_reg: LDO22 {
 735                                 regulator-name = "VMEM_VDD_2.8V";
 736                                 regulator-min-microvolt = <2800000>;
 737                                 regulator-max-microvolt = <2800000>;
 738                                 maxim,ena-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
 739                         };
 740
 741                         ldo23_reg: LDO23 {
 742                                 regulator-name = "TSP_AVDD_3.3V";
 743                                 regulator-min-microvolt = <3300000>;
 744                                 regulator-max-microvolt = <3300000>;
 745                         };
 746
 747                         ldo24_reg: LDO24 {
 748                                 regulator-name = "TSP_VDD_1.8V";
 749                                 regulator-min-microvolt = <1800000>;
 750                                 regulator-max-microvolt = <1800000>;
 751                         };
 752
 753                         ldo25_reg: LDO25 {
 754                                 regulator-name = "LCD_VCC_3.3V";
 755                                 regulator-min-microvolt = <2800000>;
 756                                 regulator-max-microvolt = <2800000>;
 757                         };
 758
 759                         ldo26_reg: LDO26 {
 760                                 regulator-name = "MOTOR_VCC_3.0V";
 761                                 regulator-min-microvolt = <3000000>;
 762                                 regulator-max-microvolt = <3000000>;
 763                         };
 764
 765                         buck1_reg: BUCK1 {
 766                                 regulator-name = "vdd_mif";
 767                                 regulator-min-microvolt = <850000>;
 768                                 regulator-max-microvolt = <1100000>;
 769                                 regulator-always-on;
 770                                 regulator-boot-on;
 771                                 regulator-state-mem {
 772                                         regulator-off-in-suspend;
 773                                 };
 774                         };
 775
 776                         buck2_reg: BUCK2 {
 777                                 regulator-name = "vdd_arm";
 778                                 regulator-min-microvolt = <850000>;
 779                                 regulator-max-microvolt = <1500000>;
 780                                 regulator-always-on;
 781                                 regulator-boot-on;
 782                                 regulator-state-mem {
 783                                         regulator-on-in-suspend;
 784                                 };
 785                         };
 786
 787                         buck3_reg: BUCK3 {
 788                                 regulator-name = "vdd_int";
 789                                 regulator-min-microvolt = <850000>;
 790                                 regulator-max-microvolt = <1150000>;
 791                                 regulator-always-on;
 792                                 regulator-boot-on;
 793                                 regulator-state-mem {
 794                                         regulator-off-in-suspend;
 795                                 };
 796                         };
 797
 798                         buck4_reg: BUCK4 {
 799                                 regulator-name = "vdd_g3d";
 800                                 regulator-min-microvolt = <850000>;
 801                                 regulator-max-microvolt = <1150000>;
 802                                 regulator-boot-on;
 803                                 regulator-state-mem {
 804                                         regulator-off-in-suspend;
 805                                 };
 806                         };
 807
 808                         buck5_reg: BUCK5 {
 809                                 regulator-name = "VMEM_1.2V_AP";
 810                                 regulator-min-microvolt = <1200000>;
 811                                 regulator-max-microvolt = <1200000>;
 812                                 regulator-always-on;
 813                         };
 814
 815                         buck6_reg: BUCK6 {
 816                                 regulator-name = "VCC_SUB_1.35V";
 817                                 regulator-min-microvolt = <1350000>;
 818                                 regulator-max-microvolt = <1350000>;
 819                                 regulator-always-on;
 820                         };
 821
 822                         buck7_reg: BUCK7 {
 823                                 regulator-name = "VCC_SUB_2.0V";
 824                                 regulator-min-microvolt = <2000000>;
 825                                 regulator-max-microvolt = <2000000>;
 826                                 regulator-always-on;
 827                         };
 828
 829                         buck8_reg: BUCK8 {
 830                                 regulator-name = "VMEM_VDDF_3.0V";
 831                                 regulator-min-microvolt = <2850000>;
 832                                 regulator-max-microvolt = <2850000>;
 833                                 maxim,ena-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
 834                         };
 835
 836                         buck9_reg: BUCK9 {
 837                                 regulator-name = "CAM_ISP_CORE_1.2V";
 838                                 regulator-min-microvolt = <1000000>;
 839                                 regulator-max-microvolt = <1200000>;
 840                                 maxim,ena-gpios = <&gpm0 3 GPIO_ACTIVE_HIGH>;
 841                         };
 842                 };
 843         };
 844 };
 845
 846 &i2s0 {
 847         pinctrl-0 = <&i2s0_bus>;
 848         pinctrl-names = "default";
 849         status = "okay";
 850 };
 851
 852 &mshc_0 {
 853         num-slots = <1>;
 854         broken-cd;
 855         non-removable;
 856         card-detect-delay = <200>;
 857         vmmc-supply = <&ldo22_reg>;
 858         clock-frequency = <400000000>;
 859         samsung,dw-mshc-ciu-div = <0>;
 860         samsung,dw-mshc-sdr-timing = <2 3>;
 861         samsung,dw-mshc-ddr-timing = <1 2>;
 862         pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>;
 863         pinctrl-names = "default";
 864         status = "okay";
 865         bus-width = <8>;
 866         cap-mmc-highspeed;
 867 };
 868
 869 &pmu_system_controller {
 870         assigned-clocks = <&pmu_system_controller 0>;
 871         assigned-clock-parents =  <&clock CLK_XUSBXTI>;
 872 };
 873
 874 &ppmu_dmc0 {
 875         status = "okay";
 876
 877         events {
 878                 ppmu_dmc0_3: ppmu-event3-dmc0 {
 879                         event-name = "ppmu-event3-dmc0";
 880                 };
 881         };
 882 };
 883
 884 &ppmu_dmc1 {
 885         status = "okay";
 886
 887         events {
 888                 ppmu_dmc1_3: ppmu-event3-dmc1 {
 889                         event-name = "ppmu-event3-dmc1";
 890                 };
 891         };
 892 };
 893
 894 &ppmu_leftbus {
 895         status = "okay";
 896
 897         events {
 898                 ppmu_leftbus_3: ppmu-event3-leftbus {
 899                         event-name = "ppmu-event3-leftbus";
 900                 };
 901         };
 902 };
 903
 904 &ppmu_rightbus {
 905         status = "okay";
 906
 907         events {
 908                 ppmu_rightbus_3: ppmu-event3-rightbus {
 909                         event-name = "ppmu-event3-rightbus";
 910                 };
 911         };
 912 };
 913
 914 &pinctrl_0 {
 915         pinctrl-names = "default";
 916         pinctrl-0 = <&sleep0>;
 917
 918         sleep0: sleep-states {
 919                 PIN_SLP(gpa0-0, INPUT, NONE);
 920                 PIN_SLP(gpa0-1, OUT0, NONE);
 921                 PIN_SLP(gpa0-2, INPUT, NONE);
 922                 PIN_SLP(gpa0-3, INPUT, UP);
 923                 PIN_SLP(gpa0-4, INPUT, NONE);
 924                 PIN_SLP(gpa0-5, INPUT, DOWN);
 925                 PIN_SLP(gpa0-6, INPUT, DOWN);
 926                 PIN_SLP(gpa0-7, INPUT, UP);
 927
 928                 PIN_SLP(gpa1-0, INPUT, DOWN);
 929                 PIN_SLP(gpa1-1, INPUT, DOWN);
 930                 PIN_SLP(gpa1-2, INPUT, DOWN);
 931                 PIN_SLP(gpa1-3, INPUT, DOWN);
 932                 PIN_SLP(gpa1-4, INPUT, DOWN);
 933                 PIN_SLP(gpa1-5, INPUT, DOWN);
 934
 935                 PIN_SLP(gpb-0, INPUT, NONE);
 936                 PIN_SLP(gpb-1, INPUT, NONE);
 937                 PIN_SLP(gpb-2, INPUT, NONE);
 938                 PIN_SLP(gpb-3, INPUT, NONE);
 939                 PIN_SLP(gpb-4, INPUT, DOWN);
 940                 PIN_SLP(gpb-5, INPUT, UP);
 941                 PIN_SLP(gpb-6, INPUT, DOWN);
 942                 PIN_SLP(gpb-7, INPUT, DOWN);
 943
 944                 PIN_SLP(gpc0-0, INPUT, DOWN);
 945                 PIN_SLP(gpc0-1, INPUT, DOWN);
 946                 PIN_SLP(gpc0-2, INPUT, DOWN);
 947                 PIN_SLP(gpc0-3, INPUT, DOWN);
 948                 PIN_SLP(gpc0-4, INPUT, DOWN);
 949
 950                 PIN_SLP(gpc1-0, INPUT, NONE);
 951                 PIN_SLP(gpc1-1, PREV, NONE);
 952                 PIN_SLP(gpc1-2, INPUT, NONE);
 953                 PIN_SLP(gpc1-3, INPUT, NONE);
 954                 PIN_SLP(gpc1-4, INPUT, NONE);
 955
 956                 PIN_SLP(gpd0-0, INPUT, DOWN);
 957                 PIN_SLP(gpd0-1, INPUT, DOWN);
 958                 PIN_SLP(gpd0-2, INPUT, NONE);
 959                 PIN_SLP(gpd0-3, INPUT, NONE);
 960
 961                 PIN_SLP(gpd1-0, INPUT, DOWN);
 962                 PIN_SLP(gpd1-1, INPUT, DOWN);
 963                 PIN_SLP(gpd1-2, INPUT, NONE);
 964                 PIN_SLP(gpd1-3, INPUT, NONE);
 965
 966                 PIN_SLP(gpf0-0, INPUT, NONE);
 967                 PIN_SLP(gpf0-1, INPUT, NONE);
 968                 PIN_SLP(gpf0-2, INPUT, DOWN);
 969                 PIN_SLP(gpf0-3, INPUT, DOWN);
 970                 PIN_SLP(gpf0-4, INPUT, NONE);
 971                 PIN_SLP(gpf0-5, INPUT, DOWN);
 972                 PIN_SLP(gpf0-6, INPUT, NONE);
 973                 PIN_SLP(gpf0-7, INPUT, DOWN);
 974
 975                 PIN_SLP(gpf1-0, INPUT, DOWN);
 976                 PIN_SLP(gpf1-1, INPUT, DOWN);
 977                 PIN_SLP(gpf1-2, INPUT, DOWN);
 978                 PIN_SLP(gpf1-3, INPUT, DOWN);
 979                 PIN_SLP(gpf1-4, INPUT, NONE);
 980                 PIN_SLP(gpf1-5, INPUT, NONE);
 981                 PIN_SLP(gpf1-6, INPUT, DOWN);
 982                 PIN_SLP(gpf1-7, PREV, NONE);
 983
 984                 PIN_SLP(gpf2-0, PREV, NONE);
 985                 PIN_SLP(gpf2-1, INPUT, DOWN);
 986                 PIN_SLP(gpf2-2, INPUT, DOWN);
 987                 PIN_SLP(gpf2-3, INPUT, DOWN);
 988                 PIN_SLP(gpf2-4, INPUT, DOWN);
 989                 PIN_SLP(gpf2-5, INPUT, DOWN);
 990                 PIN_SLP(gpf2-6, INPUT, NONE);
 991                 PIN_SLP(gpf2-7, INPUT, NONE);
 992
 993                 PIN_SLP(gpf3-0, INPUT, NONE);
 994                 PIN_SLP(gpf3-1, PREV, NONE);
 995                 PIN_SLP(gpf3-2, PREV, NONE);
 996                 PIN_SLP(gpf3-3, PREV, NONE);
 997                 PIN_SLP(gpf3-4, OUT1, NONE);
 998                 PIN_SLP(gpf3-5, INPUT, DOWN);
 999
1000                 PIN_SLP(gpj0-0, PREV, NONE);
1001                 PIN_SLP(gpj0-1, PREV, NONE);
1002                 PIN_SLP(gpj0-2, PREV, NONE);
1003                 PIN_SLP(gpj0-3, INPUT, DOWN);
1004                 PIN_SLP(gpj0-4, PREV, NONE);
1005                 PIN_SLP(gpj0-5, PREV, NONE);
1006                 PIN_SLP(gpj0-6, INPUT, DOWN);
1007                 PIN_SLP(gpj0-7, INPUT, DOWN);
1008
1009                 PIN_SLP(gpj1-0, INPUT, DOWN);
1010                 PIN_SLP(gpj1-1, PREV, NONE);
1011                 PIN_SLP(gpj1-2, PREV, NONE);
1012                 PIN_SLP(gpj1-3, INPUT, DOWN);
1013                 PIN_SLP(gpj1-4, INPUT, DOWN);
1014         };
1015 };
1016
1017 &pinctrl_1 {
1018         pinctrl-names = "default";
1019         pinctrl-0 = <&sleep1>;
1020
1021         sleep1: sleep-states {
1022                 PIN_SLP(gpk0-0, PREV, NONE);
1023                 PIN_SLP(gpk0-1, PREV, NONE);
1024                 PIN_SLP(gpk0-2, OUT0, NONE);
1025                 PIN_SLP(gpk0-3, PREV, NONE);
1026                 PIN_SLP(gpk0-4, PREV, NONE);
1027                 PIN_SLP(gpk0-5, PREV, NONE);
1028                 PIN_SLP(gpk0-6, PREV, NONE);
1029
1030                 PIN_SLP(gpk1-0, INPUT, DOWN);
1031                 PIN_SLP(gpk1-1, INPUT, DOWN);
1032                 PIN_SLP(gpk1-2, INPUT, DOWN);
1033                 PIN_SLP(gpk1-3, PREV, NONE);
1034                 PIN_SLP(gpk1-4, PREV, NONE);
1035                 PIN_SLP(gpk1-5, PREV, NONE);
1036                 PIN_SLP(gpk1-6, PREV, NONE);
1037
1038                 PIN_SLP(gpk2-0, INPUT, DOWN);
1039                 PIN_SLP(gpk2-1, INPUT, DOWN);
1040                 PIN_SLP(gpk2-2, INPUT, DOWN);
1041                 PIN_SLP(gpk2-3, INPUT, DOWN);
1042                 PIN_SLP(gpk2-4, INPUT, DOWN);
1043                 PIN_SLP(gpk2-5, INPUT, DOWN);
1044                 PIN_SLP(gpk2-6, INPUT, DOWN);
1045
1046                 PIN_SLP(gpk3-0, OUT0, NONE);
1047                 PIN_SLP(gpk3-1, INPUT, NONE);
1048                 PIN_SLP(gpk3-2, INPUT, DOWN);
1049                 PIN_SLP(gpk3-3, INPUT, NONE);
1050                 PIN_SLP(gpk3-4, INPUT, NONE);
1051                 PIN_SLP(gpk3-5, INPUT, NONE);
1052                 PIN_SLP(gpk3-6, INPUT, NONE);
1053
1054                 PIN_SLP(gpl0-0, INPUT, DOWN);
1055                 PIN_SLP(gpl0-1, INPUT, DOWN);
1056                 PIN_SLP(gpl0-2, INPUT, DOWN);
1057                 PIN_SLP(gpl0-3, INPUT, DOWN);
1058                 PIN_SLP(gpl0-4, PREV, NONE);
1059                 PIN_SLP(gpl0-6, PREV, NONE);
1060
1061                 PIN_SLP(gpl1-0, INPUT, DOWN);
1062                 PIN_SLP(gpl1-1, INPUT, DOWN);
1063                 PIN_SLP(gpl2-0, INPUT, DOWN);
1064                 PIN_SLP(gpl2-1, INPUT, DOWN);
1065                 PIN_SLP(gpl2-2, INPUT, DOWN);
1066                 PIN_SLP(gpl2-3, INPUT, DOWN);
1067                 PIN_SLP(gpl2-4, INPUT, DOWN);
1068                 PIN_SLP(gpl2-5, INPUT, DOWN);
1069                 PIN_SLP(gpl2-6, PREV, NONE);
1070                 PIN_SLP(gpl2-7, INPUT, DOWN);
1071
1072                 PIN_SLP(gpm0-0, INPUT, DOWN);
1073                 PIN_SLP(gpm0-1, INPUT, DOWN);
1074                 PIN_SLP(gpm0-2, INPUT, DOWN);
1075                 PIN_SLP(gpm0-3, INPUT, DOWN);
1076                 PIN_SLP(gpm0-4, INPUT, DOWN);
1077                 PIN_SLP(gpm0-5, INPUT, DOWN);
1078                 PIN_SLP(gpm0-6, INPUT, DOWN);
1079                 PIN_SLP(gpm0-7, INPUT, DOWN);
1080
1081                 PIN_SLP(gpm1-0, INPUT, DOWN);
1082                 PIN_SLP(gpm1-1, INPUT, DOWN);
1083                 PIN_SLP(gpm1-2, INPUT, NONE);
1084                 PIN_SLP(gpm1-3, INPUT, NONE);
1085                 PIN_SLP(gpm1-4, INPUT, NONE);
1086                 PIN_SLP(gpm1-5, INPUT, NONE);
1087                 PIN_SLP(gpm1-6, INPUT, DOWN);
1088
1089                 PIN_SLP(gpm2-0, INPUT, NONE);
1090                 PIN_SLP(gpm2-1, INPUT, NONE);
1091                 PIN_SLP(gpm2-2, INPUT, DOWN);
1092                 PIN_SLP(gpm2-3, INPUT, DOWN);
1093                 PIN_SLP(gpm2-4, INPUT, DOWN);
1094
1095                 PIN_SLP(gpm3-0, PREV, NONE);
1096                 PIN_SLP(gpm3-1, PREV, NONE);
1097                 PIN_SLP(gpm3-2, PREV, NONE);
1098                 PIN_SLP(gpm3-3, OUT1, NONE);
1099                 PIN_SLP(gpm3-4, INPUT, DOWN);
1100                 PIN_SLP(gpm3-5, INPUT, DOWN);
1101                 PIN_SLP(gpm3-6, INPUT, DOWN);
1102                 PIN_SLP(gpm3-7, INPUT, DOWN);
1103
1104                 PIN_SLP(gpm4-0, INPUT, DOWN);
1105                 PIN_SLP(gpm4-1, INPUT, DOWN);
1106                 PIN_SLP(gpm4-2, INPUT, DOWN);
1107                 PIN_SLP(gpm4-3, INPUT, DOWN);
1108                 PIN_SLP(gpm4-4, INPUT, DOWN);
1109                 PIN_SLP(gpm4-5, INPUT, DOWN);
1110                 PIN_SLP(gpm4-6, INPUT, DOWN);
1111                 PIN_SLP(gpm4-7, INPUT, DOWN);
1112
1113                 PIN_SLP(gpy0-0, INPUT, DOWN);
1114                 PIN_SLP(gpy0-1, INPUT, DOWN);
1115                 PIN_SLP(gpy0-2, INPUT, DOWN);
1116                 PIN_SLP(gpy0-3, INPUT, DOWN);
1117                 PIN_SLP(gpy0-4, INPUT, DOWN);
1118                 PIN_SLP(gpy0-5, INPUT, DOWN);
1119
1120                 PIN_SLP(gpy1-0, INPUT, DOWN);
1121                 PIN_SLP(gpy1-1, INPUT, DOWN);
1122                 PIN_SLP(gpy1-2, INPUT, DOWN);
1123                 PIN_SLP(gpy1-3, INPUT, DOWN);
1124
1125                 PIN_SLP(gpy2-0, PREV, NONE);
1126                 PIN_SLP(gpy2-1, INPUT, DOWN);
1127                 PIN_SLP(gpy2-2, INPUT, NONE);
1128                 PIN_SLP(gpy2-3, INPUT, NONE);
1129                 PIN_SLP(gpy2-4, INPUT, NONE);
1130                 PIN_SLP(gpy2-5, INPUT, NONE);
1131
1132                 PIN_SLP(gpy3-0, INPUT, DOWN);
1133                 PIN_SLP(gpy3-1, INPUT, DOWN);
1134                 PIN_SLP(gpy3-2, INPUT, DOWN);
1135                 PIN_SLP(gpy3-3, INPUT, DOWN);
1136                 PIN_SLP(gpy3-4, INPUT, DOWN);
1137                 PIN_SLP(gpy3-5, INPUT, DOWN);
1138                 PIN_SLP(gpy3-6, INPUT, DOWN);
1139                 PIN_SLP(gpy3-7, INPUT, DOWN);
1140
1141                 PIN_SLP(gpy4-0, INPUT, DOWN);
1142                 PIN_SLP(gpy4-1, INPUT, DOWN);
1143                 PIN_SLP(gpy4-2, INPUT, DOWN);
1144                 PIN_SLP(gpy4-3, INPUT, DOWN);
1145                 PIN_SLP(gpy4-4, INPUT, DOWN);
1146                 PIN_SLP(gpy4-5, INPUT, DOWN);
1147                 PIN_SLP(gpy4-6, INPUT, DOWN);
1148                 PIN_SLP(gpy4-7, INPUT, DOWN);
1149
1150                 PIN_SLP(gpy5-0, INPUT, DOWN);
1151                 PIN_SLP(gpy5-1, INPUT, DOWN);
1152                 PIN_SLP(gpy5-2, INPUT, DOWN);
1153                 PIN_SLP(gpy5-3, INPUT, DOWN);
1154                 PIN_SLP(gpy5-4, INPUT, DOWN);
1155                 PIN_SLP(gpy5-5, INPUT, DOWN);
1156                 PIN_SLP(gpy5-6, INPUT, DOWN);
1157                 PIN_SLP(gpy5-7, INPUT, DOWN);
1158
1159                 PIN_SLP(gpy6-0, INPUT, DOWN);
1160                 PIN_SLP(gpy6-1, INPUT, DOWN);
1161                 PIN_SLP(gpy6-2, INPUT, DOWN);
1162                 PIN_SLP(gpy6-3, INPUT, DOWN);
1163                 PIN_SLP(gpy6-4, INPUT, DOWN);
1164                 PIN_SLP(gpy6-5, INPUT, DOWN);
1165                 PIN_SLP(gpy6-6, INPUT, DOWN);
1166                 PIN_SLP(gpy6-7, INPUT, DOWN);
1167         };
1168 };
1169
1170 &pinctrl_2 {
1171         pinctrl-names = "default";
1172         pinctrl-0 = <&sleep2>;
1173
1174         sleep2: sleep-states {
1175                 PIN_SLP(gpz-0, INPUT, DOWN);
1176                 PIN_SLP(gpz-1, INPUT, DOWN);
1177                 PIN_SLP(gpz-2, INPUT, DOWN);
1178                 PIN_SLP(gpz-3, INPUT, DOWN);
1179                 PIN_SLP(gpz-4, INPUT, DOWN);
1180                 PIN_SLP(gpz-5, INPUT, DOWN);
1181                 PIN_SLP(gpz-6, INPUT, DOWN);
1182         };
1183 };
1184
1185 &pinctrl_3 {
1186         pinctrl-names = "default";
1187         pinctrl-0 = <&sleep3>;
1188
1189         sleep3: sleep-states {
1190                 PIN_SLP(gpv0-0, INPUT, DOWN);
1191                 PIN_SLP(gpv0-1, INPUT, DOWN);
1192                 PIN_SLP(gpv0-2, INPUT, DOWN);
1193                 PIN_SLP(gpv0-3, INPUT, DOWN);
1194                 PIN_SLP(gpv0-4, INPUT, DOWN);
1195                 PIN_SLP(gpv0-5, INPUT, DOWN);
1196                 PIN_SLP(gpv0-6, INPUT, DOWN);
1197                 PIN_SLP(gpv0-7, INPUT, DOWN);
1198
1199                 PIN_SLP(gpv1-0, INPUT, DOWN);
1200                 PIN_SLP(gpv1-1, INPUT, DOWN);
1201                 PIN_SLP(gpv1-2, INPUT, DOWN);
1202                 PIN_SLP(gpv1-3, INPUT, DOWN);
1203                 PIN_SLP(gpv1-4, INPUT, DOWN);
1204                 PIN_SLP(gpv1-5, INPUT, DOWN);
1205                 PIN_SLP(gpv1-6, INPUT, DOWN);
1206                 PIN_SLP(gpv1-7, INPUT, DOWN);
1207
1208                 PIN_SLP(gpv2-0, INPUT, DOWN);
1209                 PIN_SLP(gpv2-1, INPUT, DOWN);
1210                 PIN_SLP(gpv2-2, INPUT, DOWN);
1211                 PIN_SLP(gpv2-3, INPUT, DOWN);
1212                 PIN_SLP(gpv2-4, INPUT, DOWN);
1213                 PIN_SLP(gpv2-5, INPUT, DOWN);
1214                 PIN_SLP(gpv2-6, INPUT, DOWN);
1215                 PIN_SLP(gpv2-7, INPUT, DOWN);
1216
1217                 PIN_SLP(gpv3-0, INPUT, DOWN);
1218                 PIN_SLP(gpv3-1, INPUT, DOWN);
1219                 PIN_SLP(gpv3-2, INPUT, DOWN);
1220                 PIN_SLP(gpv3-3, INPUT, DOWN);
1221                 PIN_SLP(gpv3-4, INPUT, DOWN);
1222                 PIN_SLP(gpv3-5, INPUT, DOWN);
1223                 PIN_SLP(gpv3-6, INPUT, DOWN);
1224                 PIN_SLP(gpv3-7, INPUT, DOWN);
1225
1226                 PIN_SLP(gpv4-0, INPUT, DOWN);
1227         };
1228 };
1229
1230 &pwm {
1231         pinctrl-0 = <&pwm0_out>;
1232         pinctrl-names = "default";
1233         samsung,pwm-outputs = <0>;
1234         status = "okay";
1235 };
1236
1237 &rtc {
1238         status = "okay";
1239         clocks = <&clock CLK_RTC>, <&max77686 MAX77686_CLK_AP>;
1240         clock-names = "rtc", "rtc_src";
1241 };
1242
1243 &sdhci_2 {
1244         bus-width = <4>;
1245         cd-gpios = <&gpx3 4 GPIO_ACTIVE_HIGH>;
1246         cd-inverted;
1247         pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>;
1248         pinctrl-names = "default";
1249         vmmc-supply = <&ldo21_reg>;
1250         status = "okay";
1251 };
1252
1253 &serial_0 {
1254         status = "okay";
1255 };
1256
1257 &serial_1 {
1258         status = "okay";
1259 };
1260
1261 &serial_2 {
1262         status = "okay";
1263 };
1264
1265 &serial_3 {
1266         status = "okay";
1267 };
1268
1269 &spi_1 {
1270         pinctrl-names = "default";
1271         pinctrl-0 = <&spi1_bus>;
1272         cs-gpios = <&gpb 5 GPIO_ACTIVE_HIGH>;
1273         status = "okay";
1274
1275         s5c73m3_spi: s5c73m3 {
1276                 compatible = "samsung,s5c73m3";
1277                 spi-max-frequency = <50000000>;
1278                 reg = <0>;
1279                 controller-data {
1280                         samsung,spi-feedback-delay = <2>;
1281                 };
1282         };
1283 };
1284
1285 &tmu {
1286         vtmu-supply = <&ldo10_reg>;
1287         status = "okay";
1288 };