2 * Copyright (C) 2014 Marek Vasut <marex@denx.de>
4 * The code contained herein is licensed under the GNU General Public
5 * License. You may obtain a copy of the GNU General Public License
6 * Version 2 or later at the following locations:
8 * http://www.opensource.org/licenses/gpl-license.html
9 * http://www.gnu.org/copyleft/gpl.html
16 compatible = "denx,imx53-m53", "fsl,imx53";
19 reg = <0x70000000 0x20000000>,
20 <0xb0000000 0x20000000>;
24 compatible = "simple-bus";
28 reg_3p2v: regulator@0 {
29 compatible = "regulator-fixed";
31 regulator-name = "3P2V";
32 regulator-min-microvolt = <3200000>;
33 regulator-max-microvolt = <3200000>;
37 reg_backlight: regulator@1 {
38 compatible = "regulator-fixed";
40 regulator-name = "lcd-supply";
41 regulator-min-microvolt = <3200000>;
42 regulator-max-microvolt = <3200000>;
49 pinctrl-names = "default";
50 pinctrl-0 = <&pinctrl_i2c2>;
51 clock-frequency = <400000>;
55 compatible = "st,stmpe610";
62 interrupt-parent = <&gpio7>;
66 compatible = "st,stmpe-ts";
73 st,touch-det-delay = <3>;
81 compatible = "atmel,24c128";
87 compatible = "stm,m41t62";
93 pinctrl-names = "default";
94 pinctrl-0 = <&pinctrl_hog>;
99 MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK 0x80000000
100 MX53_PAD_EIM_EB3__GPIO2_31 0x80000000
101 MX53_PAD_PATA_DA_0__GPIO7_6 0x80000000
105 pinctrl_i2c2: i2c2grp {
107 MX53_PAD_EIM_D16__I2C2_SDA 0xc0000000
108 MX53_PAD_EIM_EB2__I2C2_SCL 0xc0000000
112 pinctrl_nand: nandgrp {
114 MX53_PAD_NANDF_WE_B__EMI_NANDF_WE_B 0x4
115 MX53_PAD_NANDF_RE_B__EMI_NANDF_RE_B 0x4
116 MX53_PAD_NANDF_CLE__EMI_NANDF_CLE 0x4
117 MX53_PAD_NANDF_ALE__EMI_NANDF_ALE 0x4
118 MX53_PAD_NANDF_WP_B__EMI_NANDF_WP_B 0xe0
119 MX53_PAD_NANDF_RB0__EMI_NANDF_RB_0 0xe0
120 MX53_PAD_NANDF_CS0__EMI_NANDF_CS_0 0x4
121 MX53_PAD_PATA_DATA0__EMI_NANDF_D_0 0xa4
122 MX53_PAD_PATA_DATA1__EMI_NANDF_D_1 0xa4
123 MX53_PAD_PATA_DATA2__EMI_NANDF_D_2 0xa4
124 MX53_PAD_PATA_DATA3__EMI_NANDF_D_3 0xa4
125 MX53_PAD_PATA_DATA4__EMI_NANDF_D_4 0xa4
126 MX53_PAD_PATA_DATA5__EMI_NANDF_D_5 0xa4
127 MX53_PAD_PATA_DATA6__EMI_NANDF_D_6 0xa4
128 MX53_PAD_PATA_DATA7__EMI_NANDF_D_7 0xa4
135 pinctrl-names = "default";
136 pinctrl-0 = <&pinctrl_nand>;
137 nand-bus-width = <8>;
138 nand-ecc-mode = "hw";