mm: hugetlb: fix hugepage memory leak caused by wrong reserve count
[linux/fpc-iii.git] / arch / arm / boot / dts / imx6qdl-gw552x.dtsi
blobd1e5048b00b51c493b7843c7eba5d9e824269e86
1 /*
2  * Copyright 2014 Gateworks Corporation
3  *
4  * The code contained herein is licensed under the GNU General Public
5  * License. You may obtain a copy of the GNU General Public License
6  * Version 2 or later at the following locations:
7  *
8  * http://www.opensource.org/licenses/gpl-license.html
9  * http://www.gnu.org/copyleft/gpl.html
10  */
12 #include <dt-bindings/gpio/gpio.h>
14 / {
15         /* these are used by bootloader for disabling nodes */
16         aliases {
17                 led0 = &led0;
18                 led1 = &led1;
19                 led2 = &led2;
20                 nand = &gpmi;
21                 usb0 = &usbh1;
22                 usb1 = &usbotg;
23         };
25         chosen {
26                 bootargs = "console=ttymxc1,115200";
27         };
29         leds {
30                 compatible = "gpio-leds";
31                 pinctrl-names = "default";
32                 pinctrl-0 = <&pinctrl_gpio_leds>;
34                 led0: user1 {
35                         label = "user1";
36                         gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
37                         default-state = "on";
38                         linux,default-trigger = "heartbeat";
39                 };
41                 led1: user2 {
42                         label = "user2";
43                         gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
44                         default-state = "off";
45                 };
47                 led2: user3 {
48                         label = "user3";
49                         gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
50                         default-state = "off";
51                 };
52         };
54         memory {
55                 reg = <0x10000000 0x20000000>;
56         };
58         regulators {
59                 compatible = "simple-bus";
60                 #address-cells = <1>;
61                 #size-cells = <0>;
63                 reg_1p0v: regulator@0 {
64                         compatible = "regulator-fixed";
65                         reg = <0>;
66                         regulator-name = "1P0V";
67                         regulator-min-microvolt = <1000000>;
68                         regulator-max-microvolt = <1000000>;
69                         regulator-always-on;
70                 };
72                 reg_3p3v: regulator@2 {
73                         compatible = "regulator-fixed";
74                         reg = <2>;
75                         regulator-name = "3P3V";
76                         regulator-min-microvolt = <3300000>;
77                         regulator-max-microvolt = <3300000>;
78                         regulator-always-on;
79                 };
81                 reg_5p0v: regulator@3 {
82                         compatible = "regulator-fixed";
83                         reg = <3>;
84                         regulator-name = "5P0V";
85                         regulator-min-microvolt = <5000000>;
86                         regulator-max-microvolt = <5000000>;
87                         regulator-always-on;
88                 };
89         };
92 &gpmi {
93         pinctrl-names = "default";
94         pinctrl-0 = <&pinctrl_gpmi_nand>;
95         status = "okay";
98 &hdmi {
99         ddc-i2c-bus = <&i2c3>;
100         status = "okay";
103 &i2c1 {
104         clock-frequency = <100000>;
105         pinctrl-names = "default";
106         pinctrl-0 = <&pinctrl_i2c1>;
107         status = "okay";
109         eeprom1: eeprom@50 {
110                 compatible = "atmel,24c02";
111                 reg = <0x50>;
112                 pagesize = <16>;
113         };
115         eeprom2: eeprom@51 {
116                 compatible = "atmel,24c02";
117                 reg = <0x51>;
118                 pagesize = <16>;
119         };
121         eeprom3: eeprom@52 {
122                 compatible = "atmel,24c02";
123                 reg = <0x52>;
124                 pagesize = <16>;
125         };
127         eeprom4: eeprom@53 {
128                 compatible = "atmel,24c02";
129                 reg = <0x53>;
130                 pagesize = <16>;
131         };
133         gpio: pca9555@23 {
134                 compatible = "nxp,pca9555";
135                 reg = <0x23>;
136                 gpio-controller;
137                 #gpio-cells = <2>;
138         };
140         rtc: ds1672@68 {
141                 compatible = "dallas,ds1672";
142                 reg = <0x68>;
143         };
146 &i2c2 {
147         clock-frequency = <100000>;
148         pinctrl-names = "default";
149         pinctrl-0 = <&pinctrl_i2c2>;
150         status = "okay";
153 &i2c3 {
154         clock-frequency = <100000>;
155         pinctrl-names = "default";
156         pinctrl-0 = <&pinctrl_i2c3>;
157         status = "okay";
160 &pcie {
161         pinctrl-names = "default";
162         pinctrl-0 = <&pinctrl_pcie>;
163         reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>;
164         status = "okay";
167 &uart2 {
168         pinctrl-names = "default";
169         pinctrl-0 = <&pinctrl_uart2>;
170         status = "okay";
173 &uart3 {
174         pinctrl-names = "default";
175         pinctrl-0 = <&pinctrl_uart3>;
176         status = "okay";
179 &uart5 {
180         pinctrl-names = "default";
181         pinctrl-0 = <&pinctrl_uart5>;
182         status = "okay"; };
184 &usbh1 {
185         status = "okay";
188 &iomuxc {
189         imx6qdl-gw552x {
190                 pinctrl_gpio_leds: gpioledsgrp {
191                         fsl,pins = <
192                                 MX6QDL_PAD_KEY_COL0__GPIO4_IO06         0x1b0b0
193                                 MX6QDL_PAD_KEY_ROW0__GPIO4_IO07         0x1b0b0
194                                 MX6QDL_PAD_KEY_ROW4__GPIO4_IO15         0x1b0b0
195                         >;
196                 };
198                 pinctrl_gpmi_nand: gpminandgrp {
199                         fsl,pins = <
200                                 MX6QDL_PAD_NANDF_CLE__NAND_CLE          0xb0b1
201                                 MX6QDL_PAD_NANDF_ALE__NAND_ALE          0xb0b1
202                                 MX6QDL_PAD_NANDF_WP_B__NAND_WP_B        0xb0b1
203                                 MX6QDL_PAD_NANDF_RB0__NAND_READY_B      0xb000
204                                 MX6QDL_PAD_NANDF_CS0__NAND_CE0_B        0xb0b1
205                                 MX6QDL_PAD_SD4_CMD__NAND_RE_B           0xb0b1
206                                 MX6QDL_PAD_SD4_CLK__NAND_WE_B           0xb0b1
207                                 MX6QDL_PAD_NANDF_D0__NAND_DATA00        0xb0b1
208                                 MX6QDL_PAD_NANDF_D1__NAND_DATA01        0xb0b1
209                                 MX6QDL_PAD_NANDF_D2__NAND_DATA02        0xb0b1
210                                 MX6QDL_PAD_NANDF_D3__NAND_DATA03        0xb0b1
211                                 MX6QDL_PAD_NANDF_D4__NAND_DATA04        0xb0b1
212                                 MX6QDL_PAD_NANDF_D5__NAND_DATA05        0xb0b1
213                                 MX6QDL_PAD_NANDF_D6__NAND_DATA06        0xb0b1
214                                 MX6QDL_PAD_NANDF_D7__NAND_DATA07        0xb0b1
215                         >;
216                 };
218                 pinctrl_i2c1: i2c1grp {
219                         fsl,pins = <
220                                 MX6QDL_PAD_EIM_D21__I2C1_SCL            0x4001b8b1
221                                 MX6QDL_PAD_EIM_D28__I2C1_SDA            0x4001b8b1
222                         >;
223                 };
225                 pinctrl_i2c2: i2c2grp {
226                         fsl,pins = <
227                                 MX6QDL_PAD_KEY_COL3__I2C2_SCL           0x4001b8b1
228                                 MX6QDL_PAD_KEY_ROW3__I2C2_SDA           0x4001b8b1
229                         >;
230                 };
232                 pinctrl_i2c3: i2c3grp {
233                         fsl,pins = <
234                                 MX6QDL_PAD_GPIO_3__I2C3_SCL             0x4001b8b1
235                                 MX6QDL_PAD_GPIO_6__I2C3_SDA             0x4001b8b1
236                         >;
237                 };
239                 pinctrl_pcie: pciegrp {
240                         fsl,pins = <
241                                 MX6QDL_PAD_ENET_TXD1__GPIO1_IO29        0x1b0b0
242                         >;
243                 };
245                 pinctrl_uart2: uart2grp {
246                         fsl,pins = <
247                                 MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA      0x1b0b1
248                                 MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA      0x1b0b1
249                         >;
250                 };
252                 pinctrl_uart3: uart3grp {
253                         fsl,pins = <
254                                 MX6QDL_PAD_EIM_D24__UART3_TX_DATA       0x1b0b1
255                                 MX6QDL_PAD_EIM_D25__UART3_RX_DATA       0x1b0b1
256                         >;
257                 };
259                 pinctrl_uart5: uart5grp {
260                         fsl,pins = <
261                                 MX6QDL_PAD_KEY_COL1__UART5_TX_DATA      0x1b0b1
262                                 MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA      0x1b0b1
263                         >;
264                 };
265         };