arch/arm/boot/dts/kirkwood-dns320.dts

   1 /dts-v1/;
   2
   3 #include "kirkwood-dnskw.dtsi"
   4
   5 / {
   6         model = "D-Link DNS-320 NAS (Rev A1)";
   7         compatible = "dlink,dns-320-a1", "dlink,dns-320", "dlink,dns-kirkwood", "marvell,kirkwood-88f6281", "marvell,kirkwood";
   8
   9         memory {
  10                 device_type = "memory";
  11                 reg = <0x00000000 0x8000000>;
  12         };
  13
  14         chosen {
  15                 bootargs = "console=ttyS0,115200n8 earlyprintk";
  16                 stdout-path = &uart0;
  17         };
  18
  19         gpio-leds {
  20                 compatible = "gpio-leds";
  21                 pinctrl-0 = <&pmx_led_power &pmx_led_red_usb_320
  22                              &pmx_led_red_left_hdd &pmx_led_red_right_hdd
  23                              &pmx_led_white_usb>;
  24                 pinctrl-names = "default";
  25
  26                 blue-power {
  27                         label = "dns320:blue:power";
  28                         gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
  29                         default-state = "keep";
  30                 };
  31                 blue-usb {
  32                         label = "dns320:blue:usb";
  33                         gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
  34                 };
  35                 orange-l_hdd {
  36                         label = "dns320:orange:l_hdd";
  37                         gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
  38                 };
  39                 orange-r_hdd {
  40                         label = "dns320:orange:r_hdd";
  41                         gpios = <&gpio0 27 GPIO_ACTIVE_LOW>;
  42                 };
  43                 orange-usb {
  44                         label = "dns320:orange:usb";
  45                         gpios = <&gpio1 3 GPIO_ACTIVE_LOW>; /* GPIO 35 */
  46                 };
  47         };
  48
  49         ocp@f1000000 {
  50                 serial@12000 {
  51                         status = "okay";
  52                 };
  53
  54                 serial@12100 {
  55                         status = "okay";
  56                 };
  57         };
  58 };