mm: hugetlb: fix hugepage memory leak caused by wrong reserve count
[linux/fpc-iii.git] / arch / arm / boot / dts / kirkwood-sheevaplug-common.dtsi
blob7196c7f3e1096fc4c42beb74db5ec2160e447ef2
1 /*
2  * kirkwood-sheevaplug-common.dtsi - Common parts for Sheevaplugs
3  *
4  * Copyright (C) 2013 Simon Baatz <gmbnomis@gmail.com>
5  *
6  * Licensed under GPLv2
7  */
9 #include "kirkwood.dtsi"
10 #include "kirkwood-6281.dtsi"
12 / {
13         memory {
14                 device_type = "memory";
15                 reg = <0x00000000 0x20000000>;
16         };
18         chosen {
19                 bootargs = "console=ttyS0,115200n8 earlyprintk";
20                 stdout-path = &uart0;
21         };
23         ocp@f1000000 {
24                 pinctrl: pin-controller@10000 {
26                         pmx_usb_power_enable: pmx-usb-power-enable {
27                                 marvell,pins = "mpp29";
28                                 marvell,function = "gpio";
29                         };
30                         pmx_led_red: pmx-led-red {
31                                 marvell,pins = "mpp46";
32                                 marvell,function = "gpio";
33                         };
34                         pmx_led_blue: pmx-led-blue {
35                                 marvell,pins = "mpp49";
36                                 marvell,function = "gpio";
37                         };
38                         pmx_sdio_cd: pmx-sdio-cd {
39                                 marvell,pins = "mpp44";
40                                 marvell,function = "gpio";
41                         };
42                         pmx_sdio_wp: pmx-sdio-wp {
43                                 marvell,pins = "mpp47";
44                                 marvell,function = "gpio";
45                         };
46                 };
47                 serial@12000 {
48                         status = "okay";
49                 };
50         };
52         regulators {
53                 compatible = "simple-bus";
54                 #address-cells = <1>;
55                 #size-cells = <0>;
56                 pinctrl-0 = <&pmx_usb_power_enable>;
57                 pinctrl-names = "default";
59                 usb_power: regulator@1 {
60                         compatible = "regulator-fixed";
61                         reg = <1>;
62                         regulator-name = "USB Power";
63                         regulator-min-microvolt = <5000000>;
64                         regulator-max-microvolt = <5000000>;
65                         enable-active-high;
66                         regulator-always-on;
67                         regulator-boot-on;
68                         gpio = <&gpio0 29 0>;
69                 };
70         };
73 &nand {
74         status = "okay";
76         partition@0 {
77                 label = "u-boot";
78                 reg = <0x0000000 0x100000>;
79         };
81         partition@100000 {
82                 label = "uImage";
83                 reg = <0x0100000 0x400000>;
84         };
86         partition@500000 {
87                 label = "root";
88                 reg = <0x0500000 0x1fb00000>;
89         };
92 &mdio {
93         status = "okay";
95         ethphy0: ethernet-phy@0 {
96                 reg = <0>;
97         };
100 &eth0 {
101         status = "okay";
102         ethernet0-port@0 {
103                 phy-handle = <&ethphy0>;
104         };