arch/arm/boot/dts/kirkwood-ts219.dtsi

   1 / {
   2         model = "QNAP TS219 family";
   3         compatible = "qnap,ts219", "marvell,kirkwood";
   4
   5         memory {
   6                 device_type = "memory";
   7                 reg = <0x00000000 0x20000000>;
   8         };
   9
  10         chosen {
  11                 bootargs = "console=ttyS0,115200n8";
  12                 stdout-path = &uart0;
  13         };
  14
  15         mbus {
  16                 pcie-controller {
  17                         status = "okay";
  18
  19                         pcie@1,0 {
  20                                 status = "okay";
  21                         };
  22                 };
  23         };
  24
  25         ocp@f1000000 {
  26                 i2c@11000 {
  27                         status = "okay";
  28                         clock-frequency = <400000>;
  29
  30                         s35390a: s35390a@30 {
  31                                 compatible = "s35390a";
  32                                 reg = <0x30>;
  33                         };
  34                 };
  35                 serial@12000 {
  36                         status = "okay";
  37                 };
  38                 serial@12100 {
  39                         status = "okay";
  40                 };
  41                 poweroff@12100 {
  42                         compatible = "qnap,power-off";
  43                         reg = <0x12100 0x100>;
  44                         clocks = <&gate_clk 7>;
  45                 };
  46                 spi@10600 {
  47                         status = "okay";
  48
  49                         m25p128@0 {
  50                                 #address-cells = <1>;
  51                                 #size-cells = <1>;
  52                                 compatible = "m25p128", "jedec,spi-nor";
  53                                 reg = <0>;
  54                                 spi-max-frequency = <20000000>;
  55                                 mode = <0>;
  56
  57                                 partition@0000000 {
  58                                         reg = <0x00000000 0x00080000>;
  59                                         label = "U-Boot";
  60                                 };
  61
  62                                 partition@00200000 {
  63                                         reg = <0x00200000 0x00200000>;
  64                                         label = "Kernel";
  65                                 };
  66
  67                                 partition@00400000 {
  68                                         reg = <0x00400000 0x00900000>;
  69                                         label = "RootFS1";
  70                                 };
  71                                 partition@00d00000 {
  72                                         reg = <0x00d00000 0x00300000>;
  73                                         label = "RootFS2";
  74                                 };
  75                                 partition@00040000 {
  76                                         reg = <0x00080000 0x00040000>;
  77                                         label = "U-Boot Config";
  78                                 };
  79                                 partition@000c0000 {
  80                                         reg = <0x000c0000 0x00140000>;
  81                                         label = "NAS Config";
  82                                 };
  83                         };
  84                 };
  85                 sata@80000 {
  86                         pinctrl-0 = <&pmx_sata0 &pmx_sata1>;
  87                         pinctrl-names = "default";
  88                         status = "okay";
  89                         nr-ports = <2>;
  90                 };
  91         };
  92 };
  93
  94 &mdio {
  95         status = "okay";
  96
  97         ethphy0: ethernet-phy {
  98                 /* overwrite reg property in board file */
  99         };
 100 };
 101
 102 &eth0 {
 103         status = "okay";
 104         ethernet0-port@0 {
 105                 phy-handle = <&ethphy0>;
 106         };
 107 };