2 * Copyright (C) 2013 Marek Belisko <marek@goldelico.com>
4 * Based on omap3-beagle-xm.dts
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License version 2 as
8 * published by the Free Software Foundation.
12 #include "omap36xx.dtsi"
15 model = "OMAP3 GTA04";
16 compatible = "ti,omap3-gta04", "ti,omap36xx", "ti,omap3";
25 device_type = "memory";
26 reg = <0x80000000 0x20000000>; /* 512 MB */
34 compatible = "gpio-keys";
39 gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
45 compatible = "ti,omap-twl4030";
53 compatible = "simple-audio-card";
54 simple-audio-card,name = "GTA04 voice";
55 simple-audio-card,bitclock-master = <&telephony_link_master>;
56 simple-audio-card,frame-master = <&telephony_link_master>;
57 simple-audio-card,format = "i2s";
59 simple-audio-card,cpu {
60 sound-dai = <&mcbsp4>;
63 telephony_link_master: simple-audio-card,codec {
64 sound-dai = <>m601_codec>;
68 gtm601_codec: gsm_codec {
69 compatible = "option,gtm601";
70 #sound-dai-cells = <0>;
74 compatible = "spi-gpio";
75 #address-cells = <0x1>;
77 pinctrl-names = "default";
78 pinctrl-0 = <&spi_gpio_pins>;
80 gpio-sck = <&gpio1 12 GPIO_ACTIVE_HIGH>;
81 gpio-miso = <&gpio1 18 GPIO_ACTIVE_HIGH>;
82 gpio-mosi = <&gpio1 20 GPIO_ACTIVE_HIGH>;
83 cs-gpios = <&gpio1 19 GPIO_ACTIVE_HIGH>;
84 num-chipselects = <1>;
88 compatible = "toppoly,td028ttec1";
90 spi-max-frequency = <100000>;
97 remote-endpoint = <&dpi_out>;
103 hsusb2_phy: hsusb2_phy {
104 compatible = "usb-nop-xceiv";
105 reset-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
109 compatible = "svideo-connector";
113 tv_connector_in: endpoint {
114 remote-endpoint = <&opa_out>;
120 compatible = "ti,opa362";
121 enable-gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
124 #address-cells = <1>;
130 remote-endpoint = <&venc_out>;
136 opa_out: endpoint@0 {
137 remote-endpoint = <&tv_connector_in>;
145 pinctrl-names = "default";
150 hsusb2_pins: pinmux_hsusb2_pins {
151 pinctrl-single,pins = <
152 OMAP3_CORE1_IOPAD(0x21d4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi1_cs3.hsusb2_data2 */
153 OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_clk.hsusb2_data7 */
154 OMAP3_CORE1_IOPAD(0x21d8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_simo.hsusb2_data4 */
155 OMAP3_CORE1_IOPAD(0x21da, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_somi.hsusb2_data5 */
156 OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_cs0.hsusb2_data6 */
157 OMAP3_CORE1_IOPAD(0x21de, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_cs1.hsusb2_data3 */
161 uart1_pins: pinmux_uart1_pins {
162 pinctrl-single,pins = <
163 OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | MUX_MODE0) /* uart1_rx.uart1_rx */
164 OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE0) /* uart1_tx.uart1_tx */
168 uart2_pins: pinmux_uart2_pins {
169 pinctrl-single,pins = <
170 OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0) /* uart2_rx.uart2_rx */
171 OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0) /* uart2_tx.uart2_tx */
175 uart3_pins: pinmux_uart3_pins {
176 pinctrl-single,pins = <
177 OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0) /* uart3_rx.uart3_rx */
178 OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx.uart3_tx */
182 mmc1_pins: pinmux_mmc1_pins {
183 pinctrl-single,pins = <
184 OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */
185 OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */
186 OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */
187 OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */
188 OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */
189 OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */
193 dss_dpi_pins: pinmux_dss_dpi_pins {
194 pinctrl-single,pins = <
195 OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */
196 OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */
197 OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */
198 OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */
199 OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0) /* dss_data0.dss_data0 */
200 OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0) /* dss_data1.dss_data1 */
201 OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0) /* dss_data2.dss_data2 */
202 OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0) /* dss_data3.dss_data3 */
203 OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0) /* dss_data4.dss_data4 */
204 OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0) /* dss_data5.dss_data5 */
205 OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */
206 OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */
207 OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */
208 OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */
209 OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */
210 OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */
211 OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */
212 OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */
213 OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */
214 OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */
215 OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */
216 OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */
217 OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE0) /* dss_data18.dss_data18 */
218 OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE0) /* dss_data19.dss_data19 */
219 OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE0) /* dss_data20.dss_data20 */
220 OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE0) /* dss_data21.dss_data21 */
221 OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0) /* dss_data22.dss_data22 */
222 OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0) /* dss_data23.dss_data23 */
227 pinctrl-single,pins = <
228 OMAP3_CORE1_IOPAD(0x21c6, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda.hdq */
234 pinctrl-names = "default";
239 hsusb2_2_pins: pinmux_hsusb2_2_pins {
240 pinctrl-single,pins = <
241 OMAP3630_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3) /* etk_d10.hsusb2_clk */
242 OMAP3630_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3) /* etk_d11.hsusb2_stp */
243 OMAP3630_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d12.hsusb2_dir */
244 OMAP3630_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d13.hsusb2_nxt */
245 OMAP3630_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d14.hsusb2_data0 */
246 OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d15.hsusb2_data1 */
250 spi_gpio_pins: spi_gpio_pinmux {
251 pinctrl-single,pins = <
252 OMAP3630_CORE2_IOPAD(0x25d8, PIN_OUTPUT | MUX_MODE4) /* clk */
253 OMAP3630_CORE2_IOPAD(0x25e6, PIN_OUTPUT | MUX_MODE4) /* cs */
254 OMAP3630_CORE2_IOPAD(0x25e8, PIN_OUTPUT | MUX_MODE4) /* tx */
255 OMAP3630_CORE2_IOPAD(0x25e4, PIN_INPUT | MUX_MODE4) /* rx */
261 clock-frequency = <2600000>;
265 interrupts = <7>; /* SYS_NIRQ cascaded to intc */
266 interrupt-parent = <&intc>;
269 compatible = "ti,twl4030-audio";
270 ti,enable-vibra = <1>;
272 ti,ramp_delay_value = <3>;
277 compatible = "ti,twl4030-power";
283 #include "twl4030.dtsi"
284 #include "twl4030_omap3.dtsi"
287 clock-frequency = <400000>;
289 /* pressure sensor */
291 compatible = "bosch,bmp085";
293 interrupt-parent = <&gpio4>;
294 interrupts = <17 IRQ_TYPE_EDGE_RISING>; /* GPIO_113 */
299 compatible = "bosch,bma180";
301 interrupt-parent = <&gpio4>;
302 interrupts = <19 IRQ_TYPE_LEVEL_HIGH>; /* GPIO_115 */
307 compatible = "invensense,itg3200";
309 interrupt-parent = <&gpio2>;
310 interrupts = <24 0>; /* GPIO_56 */
315 compatible = "ti,tca6507";
316 #address-cells = <1>;
323 gta04_led0: red_aux@0 {
324 label = "gta04:red:aux";
328 gta04_led1: green_aux@1 {
329 label = "gta04:green:aux";
333 gta04_led3: red_power@3 {
334 label = "gta04:red:power";
336 linux,default-trigger = "default-on";
339 gta04_led4: green_power@4 {
340 label = "gta04:green:power";
344 wifi_reset: wifi_reset@6 {
350 /* compass aka magnetometer */
352 compatible = "honeywell,hmc5883l";
358 compatible = "ti,tsc2007";
360 interrupt-parent = <&gpio6>;
361 interrupts = <0 IRQ_TYPE_EDGE_FALLING>; /* GPIO_160 */
362 gpios = <&gpio6 0 GPIO_ACTIVE_LOW>;
363 ti,x-plate-ohms = <600>;
368 clock-frequency = <100000>;
372 interface-type = <0>;
373 usb-phy = <&usb2_phy>;
375 phy-names = "usb2-phy";
381 port2-mode = "ehci-phy";
385 phys = <0 &hsusb2_phy>;
389 pinctrl-names = "default";
390 pinctrl-0 = <&mmc1_pins>;
391 vmmc-supply = <&vmmc1>;
397 vmmc-supply = <&vaux4>;
412 pinctrl-names = "default";
413 pinctrl-0 = <&uart1_pins>;
417 pinctrl-names = "default";
418 pinctrl-0 = <&uart2_pins>;
422 pinctrl-names = "default";
423 pinctrl-0 = <&uart3_pins>;
427 ti,bb-uvolt = <3200000>;
433 regulator-min-microvolt = <2500000>;
434 regulator-max-microvolt = <3000000>;
439 regulator-min-microvolt = <2800000>;
440 regulator-max-microvolt = <2800000>;
446 regulator-min-microvolt = <2500000>;
447 regulator-max-microvolt = <2500000>;
452 regulator-min-microvolt = <2800000>;
453 regulator-max-microvolt = <3150000>;
458 regulator-min-microvolt = <2800000>;
459 regulator-max-microvolt = <3150000>;
463 pinctrl-names = "default";
464 pinctrl-0 = < &dss_dpi_pins >;
467 vdds_dsi-supply = <&vpll2>;
471 remote-endpoint = <&lcd_in>;
480 vdda-supply = <&vdac>;
484 remote-endpoint = <&opa_in>;
492 ranges = <0 0 0x30000000 0x1000000>; /* CS0: 16MB for NAND */
495 reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
496 nand-bus-width = <16>;
497 ti,nand-ecc-opt = "bch8";
499 gpmc,sync-clk-ps = <0>;
501 gpmc,cs-rd-off-ns = <44>;
502 gpmc,cs-wr-off-ns = <44>;
503 gpmc,adv-on-ns = <6>;
504 gpmc,adv-rd-off-ns = <34>;
505 gpmc,adv-wr-off-ns = <44>;
506 gpmc,we-off-ns = <40>;
507 gpmc,oe-off-ns = <54>;
508 gpmc,access-ns = <64>;
509 gpmc,rd-cycle-ns = <82>;
510 gpmc,wr-cycle-ns = <82>;
511 gpmc,wr-access-ns = <40>;
512 gpmc,wr-data-mux-bus-ns = <0>;
513 gpmc,device-width = <2>;
515 #address-cells = <1>;
525 reg = <0x80000 0x1e0000>;
528 bootloaders_env@260000 {
529 label = "U-Boot Env";
530 reg = <0x260000 0x20000>;
535 reg = <0x280000 0x400000>;
539 label = "File System";
540 reg = <0x680000 0xf980000>;
550 pinctrl-names = "default";
551 pinctrl-0 = <&hdq_pins>;