arch/arm/boot/dts/omap4-sdp.dts

   1 /*
   2  * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
   3  *
   4  * This program is free software; you can redistribute it and/or modify
   5  * it under the terms of the GNU General Public License version 2 as
   6  * published by the Free Software Foundation.
   7  */
   8 /dts-v1/;
   9
  10 #include "omap443x.dtsi"
  11 #include "elpida_ecb240abacn.dtsi"
  12
  13 / {
  14         model = "TI OMAP4 SDP board";
  15         compatible = "ti,omap4-sdp", "ti,omap4430", "ti,omap4";
  16
  17         memory {
  18                 device_type = "memory";
  19                 reg = <0x80000000 0x40000000>; /* 1 GB */
  20         };
  21
  22         aliases {
  23                 display0 = &lcd0;
  24                 display1 = &lcd1;
  25                 display2 = &hdmi0;
  26         };
  27
  28         vdd_eth: fixedregulator-vdd-eth {
  29                 compatible = "regulator-fixed";
  30                 regulator-name = "VDD_ETH";
  31                 regulator-min-microvolt = <3300000>;
  32                 regulator-max-microvolt = <3300000>;
  33                 gpio = <&gpio2 16 GPIO_ACTIVE_HIGH>;  /* gpio line 48 */
  34                 enable-active-high;
  35                 regulator-boot-on;
  36         };
  37
  38         vbat: fixedregulator-vbat {
  39                 compatible = "regulator-fixed";
  40                 regulator-name = "VBAT";
  41                 regulator-min-microvolt = <3750000>;
  42                 regulator-max-microvolt = <3750000>;
  43                 regulator-boot-on;
  44         };
  45
  46         leds {
  47                 compatible = "gpio-leds";
  48                 debug0 {
  49                         label = "omap4:green:debug0";
  50                         gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>; /* 61 */
  51                 };
  52
  53                 debug1 {
  54                         label = "omap4:green:debug1";
  55                         gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>; /* 30 */
  56                 };
  57
  58                 debug2 {
  59                         label = "omap4:green:debug2";
  60                         gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; /* 7 */
  61                 };
  62
  63                 debug3 {
  64                         label = "omap4:green:debug3";
  65                         gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; /* 8 */
  66                 };
  67
  68                 debug4 {
  69                         label = "omap4:green:debug4";
  70                         gpios = <&gpio2 18 GPIO_ACTIVE_HIGH>; /* 50 */
  71                 };
  72
  73                 user1 {
  74                         label = "omap4:blue:user";
  75                         gpios = <&gpio6 9 GPIO_ACTIVE_HIGH>; /* 169 */
  76                 };
  77
  78                 user2 {
  79                         label = "omap4:red:user";
  80                         gpios = <&gpio6 10 GPIO_ACTIVE_HIGH>; /* 170 */
  81                 };
  82
  83                 user3 {
  84                         label = "omap4:green:user";
  85                         gpios = <&gpio5 11 GPIO_ACTIVE_HIGH>; /* 139 */
  86                 };
  87         };
  88
  89         pwmleds {
  90                 compatible = "pwm-leds";
  91                 kpad {
  92                         label = "omap4::keypad";
  93                         pwms = <&twl_pwm 0 7812500>;
  94                         max-brightness = <127>;
  95                 };
  96
  97                 charging {
  98                         label = "omap4:green:chrg";
  99                         pwms = <&twl_pwmled 0 7812500>;
 100                         max-brightness = <255>;
 101                 };
 102         };
 103
 104         backlight {
 105                 compatible = "pwm-backlight";
 106                 pwms = <&twl_pwm 1 7812500>;
 107                 brightness-levels = <
 108                                 0 10 20 30 40
 109                                 50 60 70 80 90
 110                                 100 110 120 127
 111                                 >;
 112                 default-brightness-level = <13>;
 113         };
 114
 115         sound {
 116                 compatible = "ti,abe-twl6040";
 117                 ti,model = "SDP4430";
 118
 119                 ti,jack-detection = <1>;
 120                 ti,mclk-freq = <38400000>;
 121
 122                 ti,mcpdm = <&mcpdm>;
 123                 ti,dmic = <&dmic>;
 124
 125                 ti,twl6040 = <&twl6040>;
 126
 127                 /* Audio routing */
 128                 ti,audio-routing =
 129                         "Headset Stereophone", "HSOL",
 130                         "Headset Stereophone", "HSOR",
 131                         "Earphone Spk", "EP",
 132                         "Ext Spk", "HFL",
 133                         "Ext Spk", "HFR",
 134                         "Line Out", "AUXL",
 135                         "Line Out", "AUXR",
 136                         "Vibrator", "VIBRAL",
 137                         "Vibrator", "VIBRAR",
 138                         "HSMIC", "Headset Mic",
 139                         "Headset Mic", "Headset Mic Bias",
 140                         "MAINMIC", "Main Handset Mic",
 141                         "Main Handset Mic", "Main Mic Bias",
 142                         "SUBMIC", "Sub Handset Mic",
 143                         "Sub Handset Mic", "Main Mic Bias",
 144                         "AFML", "Line In",
 145                         "AFMR", "Line In",
 146                         "DMic", "Digital Mic",
 147                         "Digital Mic", "Digital Mic1 Bias";
 148         };
 149
 150         /* regulator for wl12xx on sdio5 */
 151         wl12xx_vmmc: wl12xx_vmmc {
 152                 pinctrl-names = "default";
 153                 pinctrl-0 = <&wl12xx_gpio>;
 154                 compatible = "regulator-fixed";
 155                 regulator-name = "vwl1271";
 156                 regulator-min-microvolt = <1800000>;
 157                 regulator-max-microvolt = <1800000>;
 158                 gpio = <&gpio2 22 GPIO_ACTIVE_HIGH>;
 159                 startup-delay-us = <70000>;
 160                 enable-active-high;
 161         };
 162
 163         tpd12s015: encoder@0 {
 164                 compatible = "ti,tpd12s015";
 165
 166                 gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>,   /* 60, CT CP HPD */
 167                         <&gpio2 9 GPIO_ACTIVE_HIGH>,    /* 41, LS OE */
 168                         <&gpio2 31 GPIO_ACTIVE_HIGH>;   /* 63, HPD */
 169
 170                 ports {
 171                         #address-cells = <1>;
 172                         #size-cells = <0>;
 173
 174                         port@0 {
 175                                 reg = <0>;
 176
 177                                 tpd12s015_in: endpoint@0 {
 178                                         remote-endpoint = <&hdmi_out>;
 179                                 };
 180                         };
 181
 182                         port@1 {
 183                                 reg = <1>;
 184
 185                                 tpd12s015_out: endpoint@0 {
 186                                         remote-endpoint = <&hdmi_connector_in>;
 187                                 };
 188                         };
 189                 };
 190         };
 191
 192         hdmi0: connector@0 {
 193                 compatible = "hdmi-connector";
 194                 label = "hdmi";
 195
 196                 type = "c";
 197
 198                 port {
 199                         hdmi_connector_in: endpoint {
 200                                 remote-endpoint = <&tpd12s015_out>;
 201                         };
 202                 };
 203         };
 204 };
 205
 206 &omap4_pmx_core {
 207         pinctrl-names = "default";
 208         pinctrl-0 = <
 209                         &dss_hdmi_pins
 210                         &tpd12s015_pins
 211         >;
 212
 213         uart2_pins: pinmux_uart2_pins {
 214                 pinctrl-single,pins = <
 215                         0xd8 (PIN_INPUT_PULLUP | MUX_MODE0)     /* uart2_cts.uart2_cts */
 216                         0xda (PIN_OUTPUT | MUX_MODE0)           /* uart2_rts.uart2_rts */
 217                         0xdc (PIN_INPUT_PULLUP | MUX_MODE0)     /* uart2_rx.uart2_rx */
 218                         0xde (PIN_OUTPUT | MUX_MODE0)           /* uart2_tx.uart2_tx */
 219                 >;
 220         };
 221
 222         uart3_pins: pinmux_uart3_pins {
 223                 pinctrl-single,pins = <
 224                         0x100 (PIN_INPUT_PULLUP | MUX_MODE0)    /* uart3_cts_rctx.uart3_cts_rctx */
 225                         0x102 (PIN_OUTPUT | MUX_MODE0)          /* uart3_rts_sd.uart3_rts_sd */
 226                         0x104 (PIN_INPUT | MUX_MODE0)           /* uart3_rx_irrx.uart3_rx_irrx */
 227                         0x106 (PIN_OUTPUT | MUX_MODE0)          /* uart3_tx_irtx.uart3_tx_irtx */
 228                 >;
 229         };
 230
 231         uart4_pins: pinmux_uart4_pins {
 232                 pinctrl-single,pins = <
 233                         0x11c (PIN_INPUT | MUX_MODE0)           /* uart4_rx.uart4_rx */
 234                         0x11e (PIN_OUTPUT | MUX_MODE0)          /* uart4_tx.uart4_tx */
 235                 >;
 236         };
 237
 238         twl6040_pins: pinmux_twl6040_pins {
 239                 pinctrl-single,pins = <
 240                         0xe0 (PIN_OUTPUT | MUX_MODE3)           /* hdq_sio.gpio_127 */
 241                         0x160 (PIN_INPUT | MUX_MODE0)           /* sys_nirq2.sys_nirq2 */
 242                 >;
 243         };
 244
 245         mcpdm_pins: pinmux_mcpdm_pins {
 246                 pinctrl-single,pins = <
 247                         0xc6 (PIN_INPUT_PULLDOWN | MUX_MODE0)   /* abe_pdm_ul_data.abe_pdm_ul_data */
 248                         0xc8 (PIN_INPUT_PULLDOWN | MUX_MODE0)   /* abe_pdm_dl_data.abe_pdm_dl_data */
 249                         0xca (PIN_INPUT_PULLUP | MUX_MODE0)     /* abe_pdm_frame.abe_pdm_frame */
 250                         0xcc (PIN_INPUT_PULLDOWN | MUX_MODE0)   /* abe_pdm_lb_clk.abe_pdm_lb_clk */
 251                         0xce (PIN_INPUT_PULLDOWN | MUX_MODE0)   /* abe_clks.abe_clks */
 252                 >;
 253         };
 254
 255         dmic_pins: pinmux_dmic_pins {
 256                 pinctrl-single,pins = <
 257                         0xd0 (PIN_OUTPUT | MUX_MODE0)           /* abe_dmic_clk1.abe_dmic_clk1 */
 258                         0xd2 (PIN_INPUT | MUX_MODE0)            /* abe_dmic_din1.abe_dmic_din1 */
 259                         0xd4 (PIN_INPUT | MUX_MODE0)            /* abe_dmic_din2.abe_dmic_din2 */
 260                         0xd6 (PIN_INPUT | MUX_MODE0)            /* abe_dmic_din3.abe_dmic_din3 */
 261                 >;
 262         };
 263
 264         mcbsp1_pins: pinmux_mcbsp1_pins {
 265                 pinctrl-single,pins = <
 266                         0xbe (PIN_INPUT | MUX_MODE0)            /* abe_mcbsp1_clkx.abe_mcbsp1_clkx */
 267                         0xc0 (PIN_INPUT_PULLDOWN | MUX_MODE0)   /* abe_mcbsp1_dr.abe_mcbsp1_dr */
 268                         0xc2 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)  /* abe_mcbsp1_dx.abe_mcbsp1_dx */
 269                         0xc4 (PIN_INPUT | MUX_MODE0)            /* abe_mcbsp1_fsx.abe_mcbsp1_fsx */
 270                 >;
 271         };
 272
 273         mcbsp2_pins: pinmux_mcbsp2_pins {
 274                 pinctrl-single,pins = <
 275                         0xb6 (PIN_INPUT | MUX_MODE0)            /* abe_mcbsp2_clkx.abe_mcbsp2_clkx */
 276                         0xb8 (PIN_INPUT_PULLDOWN | MUX_MODE0)   /* abe_mcbsp2_dr.abe_mcbsp2_dr */
 277                         0xba (PIN_OUTPUT_PULLDOWN | MUX_MODE0)  /* abe_mcbsp2_dx.abe_mcbsp2_dx */
 278                         0xbc (PIN_INPUT | MUX_MODE0)            /* abe_mcbsp2_fsx.abe_mcbsp2_fsx */
 279                 >;
 280         };
 281
 282         mcspi1_pins: pinmux_mcspi1_pins {
 283                 pinctrl-single,pins = <
 284                         0xf2 (PIN_INPUT | MUX_MODE0)            /*  mcspi1_clk.mcspi1_clk */
 285                         0xf4 (PIN_INPUT | MUX_MODE0)            /*  mcspi1_somi.mcspi1_somi */
 286                         0xf6 (PIN_INPUT | MUX_MODE0)            /*  mcspi1_simo.mcspi1_simo */
 287                         0xf8 (PIN_INPUT | MUX_MODE0)            /*  mcspi1_cs0.mcspi1_cs0 */
 288                 >;
 289         };
 290
 291         dss_hdmi_pins: pinmux_dss_hdmi_pins {
 292                 pinctrl-single,pins = <
 293                         0x5a (PIN_INPUT_PULLUP | MUX_MODE0)     /* hdmi_cec.hdmi_cec */
 294                         0x5c (PIN_INPUT_PULLUP | MUX_MODE0)     /* hdmi_scl.hdmi_scl */
 295                         0x5e (PIN_INPUT_PULLUP | MUX_MODE0)     /* hdmi_sda.hdmi_sda */
 296                 >;
 297         };
 298
 299         tpd12s015_pins: pinmux_tpd12s015_pins {
 300                 pinctrl-single,pins = <
 301                         0x22 (PIN_OUTPUT | MUX_MODE3)           /* gpmc_a17.gpio_41 */
 302                         0x48 (PIN_OUTPUT | MUX_MODE3)           /* gpmc_nbe1.gpio_60 */
 303                         0x58 (PIN_INPUT_PULLDOWN | MUX_MODE3)   /* hdmi_hpd.gpio_63 */
 304                 >;
 305         };
 306
 307         i2c1_pins: pinmux_i2c1_pins {
 308                 pinctrl-single,pins = <
 309                         0xe2 (PIN_INPUT_PULLUP | MUX_MODE0)     /* i2c1_scl */
 310                         0xe4 (PIN_INPUT_PULLUP | MUX_MODE0)     /* i2c1_sda */
 311                 >;
 312         };
 313
 314         i2c2_pins: pinmux_i2c2_pins {
 315                 pinctrl-single,pins = <
 316                         0xe6 (PIN_INPUT_PULLUP | MUX_MODE0)     /* i2c2_scl */
 317                         0xe8 (PIN_INPUT_PULLUP | MUX_MODE0)     /* i2c2_sda */
 318                 >;
 319         };
 320
 321         i2c3_pins: pinmux_i2c3_pins {
 322                 pinctrl-single,pins = <
 323                         0xea (PIN_INPUT_PULLUP | MUX_MODE0)     /* i2c3_scl */
 324                         0xec (PIN_INPUT_PULLUP | MUX_MODE0)     /* i2c3_sda */
 325                 >;
 326         };
 327
 328         i2c4_pins: pinmux_i2c4_pins {
 329                 pinctrl-single,pins = <
 330                         0xee (PIN_INPUT_PULLUP | MUX_MODE0)     /* i2c4_scl */
 331                         0xf0 (PIN_INPUT_PULLUP | MUX_MODE0)     /* i2c4_sda */
 332                 >;
 333         };
 334
 335         /* wl12xx GPIO output for WLAN_EN */
 336         wl12xx_gpio: pinmux_wl12xx_gpio {
 337                 pinctrl-single,pins = <
 338                         0x3c (PIN_OUTPUT | MUX_MODE3)           /* gpmc_nwp.gpio_54 */
 339                 >;
 340         };
 341
 342         /* wl12xx GPIO inputs and SDIO pins */
 343         wl12xx_pins: pinmux_wl12xx_pins {
 344                 pinctrl-single,pins = <
 345                         0x3a (PIN_INPUT | MUX_MODE3)            /* gpmc_ncs3.gpio_53 */
 346                         0x108 (PIN_INPUT_PULLUP | MUX_MODE0)    /* sdmmc5_clk.sdmmc5_clk */
 347                         0x10a (PIN_INPUT_PULLUP | MUX_MODE0)    /* sdmmc5_cmd.sdmmc5_cmd */
 348                         0x10c (PIN_INPUT_PULLUP | MUX_MODE0)    /* sdmmc5_dat0.sdmmc5_dat0 */
 349                         0x10e (PIN_INPUT_PULLUP | MUX_MODE0)    /* sdmmc5_dat1.sdmmc5_dat1 */
 350                         0x110 (PIN_INPUT_PULLUP | MUX_MODE0)    /* sdmmc5_dat2.sdmmc5_dat2 */
 351                         0x112 (PIN_INPUT_PULLUP | MUX_MODE0)    /* sdmmc5_dat3.sdmmc5_dat3 */
 352                 >;
 353         };
 354 };
 355
 356 &i2c1 {
 357         pinctrl-names = "default";
 358         pinctrl-0 = <&i2c1_pins>;
 359
 360         clock-frequency = <400000>;
 361
 362         twl: twl@48 {
 363                 reg = <0x48>;
 364                 /* SPI = 0, IRQ# = 7, 4 = active high level-sensitive */
 365                 interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_1N cascaded to gic */
 366         };
 367
 368         twl6040: twl@4b {
 369                 compatible = "ti,twl6040";
 370                 reg = <0x4b>;
 371
 372                 pinctrl-names = "default";
 373                 pinctrl-0 = <&twl6040_pins>;
 374
 375                 /* SPI = 0, IRQ# = 119, 4 = active high level-sensitive */
 376                 interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_2N cascaded to gic */
 377                 ti,audpwron-gpio = <&gpio4 31 GPIO_ACTIVE_HIGH>;  /* gpio line 127 */
 378
 379                 vio-supply = <&v1v8>;
 380                 v2v1-supply = <&v2v1>;
 381                 enable-active-high;
 382
 383                 /* regulators for vibra motor */
 384                 vddvibl-supply = <&vbat>;
 385                 vddvibr-supply = <&vbat>;
 386
 387                 vibra {
 388                         /* Vibra driver, motor resistance parameters */
 389                         ti,vibldrv-res = <8>;
 390                         ti,vibrdrv-res = <3>;
 391                         ti,viblmotor-res = <10>;
 392                         ti,vibrmotor-res = <10>;
 393                 };
 394         };
 395 };
 396
 397 #include "twl6030.dtsi"
 398 #include "twl6030_omap4.dtsi"
 399
 400 &i2c2 {
 401         pinctrl-names = "default";
 402         pinctrl-0 = <&i2c2_pins>;
 403
 404         clock-frequency = <400000>;
 405 };
 406
 407 &i2c3 {
 408         pinctrl-names = "default";
 409         pinctrl-0 = <&i2c3_pins>;
 410
 411         clock-frequency = <400000>;
 412
 413         /*
 414          * Temperature Sensor
 415          * http://www.ti.com/lit/ds/symlink/tmp105.pdf
 416          */
 417         tmp105@48 {
 418                 compatible = "ti,tmp105";
 419                 reg = <0x48>;
 420         };
 421
 422         /*
 423          * Ambient Light Sensor
 424          * http://www.rohm.com/products/databook/sensor/pdf/bh1780gli-e.pdf
 425          */
 426         bh1780@29 {
 427                 compatible = "rohm,bh1780";
 428                 reg = <0x29>;
 429         };
 430 };
 431
 432 &i2c4 {
 433         pinctrl-names = "default";
 434         pinctrl-0 = <&i2c4_pins>;
 435
 436         clock-frequency = <400000>;
 437
 438         /*
 439          * 3-Axis Digital Compass
 440          * http://www.sparkfun.com/datasheets/Sensors/Magneto/HMC5843.pdf
 441          */
 442         hmc5843@1e {
 443                 compatible = "honeywell,hmc5843";
 444                 reg = <0x1e>;
 445         };
 446 };
 447
 448 &mcspi1 {
 449         pinctrl-names = "default";
 450         pinctrl-0 = <&mcspi1_pins>;
 451
 452         eth@0 {
 453                 compatible = "ks8851";
 454                 spi-max-frequency = <24000000>;
 455                 reg = <0>;
 456                 interrupt-parent = <&gpio2>;
 457                 interrupts = <2 IRQ_TYPE_LEVEL_LOW>; /* gpio line 34 */
 458                 vdd-supply = <&vdd_eth>;
 459         };
 460 };
 461
 462 &mmc1 {
 463         vmmc-supply = <&vmmc>;
 464         bus-width = <8>;
 465 };
 466
 467 &mmc2 {
 468         vmmc-supply = <&vaux1>;
 469         bus-width = <8>;
 470         ti,non-removable;
 471 };
 472
 473 &mmc3 {
 474         status = "disabled";
 475 };
 476
 477 &mmc4 {
 478         status = "disabled";
 479 };
 480
 481 &mmc5 {
 482         pinctrl-names = "default";
 483         pinctrl-0 = <&wl12xx_pins>;
 484         vmmc-supply = <&wl12xx_vmmc>;
 485         non-removable;
 486         bus-width = <4>;
 487         cap-power-off-card;
 488
 489         #address-cells = <1>;
 490         #size-cells = <0>;
 491         wlcore: wlcore@2 {
 492                 compatible = "ti,wl1281";
 493                 reg = <2>;
 494                 interrupt-parent = <&gpio1>;
 495                 interrupts = <21 IRQ_TYPE_LEVEL_HIGH>; /* gpio 53 */
 496                 ref-clock-frequency = <26000000>;
 497                 tcxo-clock-frequency = <26000000>;
 498         };
 499 };
 500
 501 &emif1 {
 502         cs1-used;
 503         device-handle = <&elpida_ECB240ABACN>;
 504 };
 505
 506 &emif2 {
 507         cs1-used;
 508         device-handle = <&elpida_ECB240ABACN>;
 509 };
 510
 511 &keypad {
 512         keypad,num-rows = <8>;
 513         keypad,num-columns = <8>;
 514         linux,keymap = <0x00000012      /* KEY_E */
 515                         0x00010013      /* KEY_R */
 516                         0x00020014      /* KEY_T */
 517                         0x00030066      /* KEY_HOME */
 518                         0x0004003f      /* KEY_F5 */
 519                         0x000500f0      /* KEY_UNKNOWN */
 520                         0x00060017      /* KEY_I */
 521                         0x0007002a      /* KEY_LEFTSHIFT */
 522                         0x01000020      /* KEY_D*/
 523                         0x01010021      /* KEY_F */
 524                         0x01020022      /* KEY_G */
 525                         0x010300e7      /* KEY_SEND */
 526                         0x01040040      /* KEY_F6 */
 527                         0x010500f0      /* KEY_UNKNOWN */
 528                         0x01060025      /* KEY_K */
 529                         0x0107001c      /* KEY_ENTER */
 530                         0x0200002d      /* KEY_X */
 531                         0x0201002e      /* KEY_C */
 532                         0x0202002f      /* KEY_V */
 533                         0x0203006b      /* KEY_END */
 534                         0x02040041      /* KEY_F7 */
 535                         0x020500f0      /* KEY_UNKNOWN */
 536                         0x02060034      /* KEY_DOT */
 537                         0x0207003a      /* KEY_CAPSLOCK */
 538                         0x0300002c      /* KEY_Z */
 539                         0x0301004e      /* KEY_KPLUS */
 540                         0x03020030      /* KEY_B */
 541                         0x0303003b      /* KEY_F1 */
 542                         0x03040042      /* KEY_F8 */
 543                         0x030500f0      /* KEY_UNKNOWN */
 544                         0x03060018      /* KEY_O */
 545                         0x03070039      /* KEY_SPACE */
 546                         0x04000011      /* KEY_W */
 547                         0x04010015      /* KEY_Y */
 548                         0x04020016      /* KEY_U */
 549                         0x0403003c      /* KEY_F2 */
 550                         0x04040073      /* KEY_VOLUMEUP */
 551                         0x040500f0      /* KEY_UNKNOWN */
 552                         0x04060026      /* KEY_L */
 553                         0x04070069      /* KEY_LEFT */
 554                         0x0500001f      /* KEY_S */
 555                         0x05010023      /* KEY_H */
 556                         0x05020024      /* KEY_J */
 557                         0x0503003d      /* KEY_F3 */
 558                         0x05040043      /* KEY_F9 */
 559                         0x05050072      /* KEY_VOLUMEDOWN */
 560                         0x05060032      /* KEY_M */
 561                         0x0507006a      /* KEY_RIGHT */
 562                         0x06000010      /* KEY_Q */
 563                         0x0601001e      /* KEY_A */
 564                         0x06020031      /* KEY_N */
 565                         0x0603009e      /* KEY_BACK */
 566                         0x0604000e      /* KEY_BACKSPACE */
 567                         0x060500f0      /* KEY_UNKNOWN */
 568                         0x06060019      /* KEY_P */
 569                         0x06070067      /* KEY_UP */
 570                         0x07000094      /* KEY_PROG1 */
 571                         0x07010095      /* KEY_PROG2 */
 572                         0x070200ca      /* KEY_PROG3 */
 573                         0x070300cb      /* KEY_PROG4 */
 574                         0x0704003e      /* KEY_F4 */
 575                         0x070500f0      /* KEY_UNKNOWN */
 576                         0x07060160      /* KEY_OK */
 577                         0x0707006c>;    /* KEY_DOWN */
 578         linux,input-no-autorepeat;
 579 };
 580
 581 &uart2 {
 582         interrupts-extended = <&wakeupgen GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH
 583                                &omap4_pmx_core OMAP4_UART2_RX>;
 584         pinctrl-names = "default";
 585         pinctrl-0 = <&uart2_pins>;
 586 };
 587
 588 &uart3 {
 589         interrupts-extended = <&wakeupgen GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH
 590                                &omap4_pmx_core OMAP4_UART3_RX>;
 591         pinctrl-names = "default";
 592         pinctrl-0 = <&uart3_pins>;
 593 };
 594
 595 &uart4 {
 596         interrupts-extended = <&wakeupgen GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH
 597                                &omap4_pmx_core OMAP4_UART4_RX>;
 598         pinctrl-names = "default";
 599         pinctrl-0 = <&uart4_pins>;
 600 };
 601
 602 &mcbsp1 {
 603         pinctrl-names = "default";
 604         pinctrl-0 = <&mcbsp1_pins>;
 605         status = "okay";
 606 };
 607
 608 &mcbsp2 {
 609         pinctrl-names = "default";
 610         pinctrl-0 = <&mcbsp2_pins>;
 611         status = "okay";
 612 };
 613
 614 &dmic {
 615         pinctrl-names = "default";
 616         pinctrl-0 = <&dmic_pins>;
 617         status = "okay";
 618 };
 619
 620 &mcpdm {
 621         pinctrl-names = "default";
 622         pinctrl-0 = <&mcpdm_pins>;
 623         status = "okay";
 624 };
 625
 626 &twl_usb_comparator {
 627         usb-supply = <&vusb>;
 628 };
 629
 630 &usb_otg_hs {
 631         interface-type = <1>;
 632         mode = <3>;
 633         power = <50>;
 634 };
 635
 636 &dss {
 637         status = "ok";
 638 };
 639
 640 &dsi1 {
 641         status = "ok";
 642         vdd-supply = <&vcxio>;
 643
 644         port {
 645                 dsi1_out_ep: endpoint {
 646                         remote-endpoint = <&lcd0_in>;
 647                         lanes = <0 1 2 3 4 5>;
 648                 };
 649         };
 650
 651         lcd0: display {
 652                 compatible = "tpo,taal", "panel-dsi-cm";
 653                 label = "lcd0";
 654
 655                 reset-gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>;      /* 102 */
 656
 657                 port {
 658                         lcd0_in: endpoint {
 659                                 remote-endpoint = <&dsi1_out_ep>;
 660                         };
 661                 };
 662         };
 663 };
 664
 665 &dsi2 {
 666         status = "ok";
 667         vdd-supply = <&vcxio>;
 668
 669         port {
 670                 dsi2_out_ep: endpoint {
 671                         remote-endpoint = <&lcd1_in>;
 672                         lanes = <0 1 2 3 4 5>;
 673                 };
 674         };
 675
 676         lcd1: display {
 677                 compatible = "tpo,taal", "panel-dsi-cm";
 678                 label = "lcd1";
 679
 680                 reset-gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>;      /* 104 */
 681
 682                 port {
 683                         lcd1_in: endpoint {
 684                                 remote-endpoint = <&dsi2_out_ep>;
 685                         };
 686                 };
 687         };
 688 };
 689
 690 &hdmi {
 691         status = "ok";
 692         vdda-supply = <&vdac>;
 693
 694         port {
 695                 hdmi_out: endpoint {
 696                         remote-endpoint = <&tpd12s015_in>;
 697                 };
 698         };
 699 };