arch/arm/boot/dts/qcom-ipq8064.dtsi

   1 /dts-v1/;
   2
   3 #include "skeleton.dtsi"
   4 #include <dt-bindings/clock/qcom,gcc-ipq806x.h>
   5 #include <dt-bindings/clock/qcom,lcc-ipq806x.h>
   6 #include <dt-bindings/soc/qcom,gsbi.h>
   7
   8 / {
   9         model = "Qualcomm IPQ8064";
  10         compatible = "qcom,ipq8064";
  11         interrupt-parent = <&intc>;
  12
  13         cpus {
  14                 #address-cells = <1>;
  15                 #size-cells = <0>;
  16
  17                 cpu@0 {
  18                         compatible = "qcom,krait";
  19                         enable-method = "qcom,kpss-acc-v1";
  20                         device_type = "cpu";
  21                         reg = <0>;
  22                         next-level-cache = <&L2>;
  23                         qcom,acc = <&acc0>;
  24                         qcom,saw = <&saw0>;
  25                 };
  26
  27                 cpu@1 {
  28                         compatible = "qcom,krait";
  29                         enable-method = "qcom,kpss-acc-v1";
  30                         device_type = "cpu";
  31                         reg = <1>;
  32                         next-level-cache = <&L2>;
  33                         qcom,acc = <&acc1>;
  34                         qcom,saw = <&saw1>;
  35                 };
  36
  37                 L2: l2-cache {
  38                         compatible = "cache";
  39                         cache-level = <2>;
  40                 };
  41         };
  42
  43         cpu-pmu {
  44                 compatible = "qcom,krait-pmu";
  45                 interrupts = <1 10 0x304>;
  46         };
  47
  48         reserved-memory {
  49                 #address-cells = <1>;
  50                 #size-cells = <1>;
  51                 ranges;
  52
  53                 nss@40000000 {
  54                         reg = <0x40000000 0x1000000>;
  55                         no-map;
  56                 };
  57
  58                 smem@41000000 {
  59                         reg = <0x41000000 0x200000>;
  60                         no-map;
  61                 };
  62         };
  63
  64         clocks {
  65                 sleep_clk: sleep_clk {
  66                         compatible = "fixed-clock";
  67                         clock-frequency = <32768>;
  68                         #clock-cells = <0>;
  69                 };
  70         };
  71
  72         soc: soc {
  73                 #address-cells = <1>;
  74                 #size-cells = <1>;
  75                 ranges;
  76                 compatible = "simple-bus";
  77
  78                 lpass@28100000 {
  79                         compatible = "qcom,lpass-cpu";
  80                         status = "disabled";
  81                         clocks = <&lcc AHBIX_CLK>,
  82                                         <&lcc MI2S_OSR_CLK>,
  83                                         <&lcc MI2S_BIT_CLK>;
  84                         clock-names = "ahbix-clk",
  85                                         "mi2s-osr-clk",
  86                                         "mi2s-bit-clk";
  87                         interrupts = <0 85 1>;
  88                         interrupt-names = "lpass-irq-lpaif";
  89                         reg = <0x28100000 0x10000>;
  90                         reg-names = "lpass-lpaif";
  91                 };
  92
  93                 qcom_pinmux: pinmux@800000 {
  94                         compatible = "qcom,ipq8064-pinctrl";
  95                         reg = <0x800000 0x4000>;
  96
  97                         gpio-controller;
  98                         #gpio-cells = <2>;
  99                         interrupt-controller;
 100                         #interrupt-cells = <2>;
 101                         interrupts = <0 16 0x4>;
 102                 };
 103
 104                 intc: interrupt-controller@2000000 {
 105                         compatible = "qcom,msm-qgic2";
 106                         interrupt-controller;
 107                         #interrupt-cells = <3>;
 108                         reg = <0x02000000 0x1000>,
 109                               <0x02002000 0x1000>;
 110                 };
 111
 112                 timer@200a000 {
 113                         compatible = "qcom,kpss-timer", "qcom,msm-timer";
 114                         interrupts = <1 1 0x301>,
 115                                      <1 2 0x301>,
 116                                      <1 3 0x301>,
 117                                      <1 4 0x301>,
 118                                      <1 5 0x301>;
 119                         reg = <0x0200a000 0x100>;
 120                         clock-frequency = <25000000>,
 121                                           <32768>;
 122                         clocks = <&sleep_clk>;
 123                         clock-names = "sleep";
 124                         cpu-offset = <0x80000>;
 125                 };
 126
 127                 acc0: clock-controller@2088000 {
 128                         compatible = "qcom,kpss-acc-v1";
 129                         reg = <0x02088000 0x1000>, <0x02008000 0x1000>;
 130                 };
 131
 132                 acc1: clock-controller@2098000 {
 133                         compatible = "qcom,kpss-acc-v1";
 134                         reg = <0x02098000 0x1000>, <0x02008000 0x1000>;
 135                 };
 136
 137                 saw0: regulator@2089000 {
 138                         compatible = "qcom,saw2";
 139                         reg = <0x02089000 0x1000>, <0x02009000 0x1000>;
 140                         regulator;
 141                 };
 142
 143                 saw1: regulator@2099000 {
 144                         compatible = "qcom,saw2";
 145                         reg = <0x02099000 0x1000>, <0x02009000 0x1000>;
 146                         regulator;
 147                 };
 148
 149                 gsbi2: gsbi@12480000 {
 150                         compatible = "qcom,gsbi-v1.0.0";
 151                         cell-index = <2>;
 152                         reg = <0x12480000 0x100>;
 153                         clocks = <&gcc GSBI2_H_CLK>;
 154                         clock-names = "iface";
 155                         #address-cells = <1>;
 156                         #size-cells = <1>;
 157                         ranges;
 158                         status = "disabled";
 159
 160                         syscon-tcsr = <&tcsr>;
 161
 162                         serial@12490000 {
 163                                 compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
 164                                 reg = <0x12490000 0x1000>,
 165                                       <0x12480000 0x1000>;
 166                                 interrupts = <0 195 0x0>;
 167                                 clocks = <&gcc GSBI2_UART_CLK>, <&gcc GSBI2_H_CLK>;
 168                                 clock-names = "core", "iface";
 169                                 status = "disabled";
 170                         };
 171
 172                         i2c@124a0000 {
 173                                 compatible = "qcom,i2c-qup-v1.1.1";
 174                                 reg = <0x124a0000 0x1000>;
 175                                 interrupts = <0 196 0>;
 176
 177                                 clocks = <&gcc GSBI2_QUP_CLK>, <&gcc GSBI2_H_CLK>;
 178                                 clock-names = "core", "iface";
 179                                 status = "disabled";
 180
 181                                 #address-cells = <1>;
 182                                 #size-cells = <0>;
 183                         };
 184
 185                 };
 186
 187                 gsbi4: gsbi@16300000 {
 188                         compatible = "qcom,gsbi-v1.0.0";
 189                         cell-index = <4>;
 190                         reg = <0x16300000 0x100>;
 191                         clocks = <&gcc GSBI4_H_CLK>;
 192                         clock-names = "iface";
 193                         #address-cells = <1>;
 194                         #size-cells = <1>;
 195                         ranges;
 196                         status = "disabled";
 197
 198                         syscon-tcsr = <&tcsr>;
 199
 200                         gsbi4_serial: serial@16340000 {
 201                                 compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
 202                                 reg = <0x16340000 0x1000>,
 203                                       <0x16300000 0x1000>;
 204                                 interrupts = <0 152 0x0>;
 205                                 clocks = <&gcc GSBI4_UART_CLK>, <&gcc GSBI4_H_CLK>;
 206                                 clock-names = "core", "iface";
 207                                 status = "disabled";
 208                         };
 209
 210                         i2c@16380000 {
 211                                 compatible = "qcom,i2c-qup-v1.1.1";
 212                                 reg = <0x16380000 0x1000>;
 213                                 interrupts = <0 153 0>;
 214
 215                                 clocks = <&gcc GSBI4_QUP_CLK>, <&gcc GSBI4_H_CLK>;
 216                                 clock-names = "core", "iface";
 217                                 status = "disabled";
 218
 219                                 #address-cells = <1>;
 220                                 #size-cells = <0>;
 221                         };
 222                 };
 223
 224                 gsbi5: gsbi@1a200000 {
 225                         compatible = "qcom,gsbi-v1.0.0";
 226                         cell-index = <5>;
 227                         reg = <0x1a200000 0x100>;
 228                         clocks = <&gcc GSBI5_H_CLK>;
 229                         clock-names = "iface";
 230                         #address-cells = <1>;
 231                         #size-cells = <1>;
 232                         ranges;
 233                         status = "disabled";
 234
 235                         syscon-tcsr = <&tcsr>;
 236
 237                         serial@1a240000 {
 238                                 compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
 239                                 reg = <0x1a240000 0x1000>,
 240                                       <0x1a200000 0x1000>;
 241                                 interrupts = <0 154 0x0>;
 242                                 clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>;
 243                                 clock-names = "core", "iface";
 244                                 status = "disabled";
 245                         };
 246
 247                         i2c@1a280000 {
 248                                 compatible = "qcom,i2c-qup-v1.1.1";
 249                                 reg = <0x1a280000 0x1000>;
 250                                 interrupts = <0 155 0>;
 251
 252                                 clocks = <&gcc GSBI5_QUP_CLK>, <&gcc GSBI5_H_CLK>;
 253                                 clock-names = "core", "iface";
 254                                 status = "disabled";
 255
 256                                 #address-cells = <1>;
 257                                 #size-cells = <0>;
 258                         };
 259
 260                         spi@1a280000 {
 261                                 compatible = "qcom,spi-qup-v1.1.1";
 262                                 reg = <0x1a280000 0x1000>;
 263                                 interrupts = <0 155 0>;
 264
 265                                 clocks = <&gcc GSBI5_QUP_CLK>, <&gcc GSBI5_H_CLK>;
 266                                 clock-names = "core", "iface";
 267                                 status = "disabled";
 268
 269                                 #address-cells = <1>;
 270                                 #size-cells = <0>;
 271                         };
 272                 };
 273
 274                 sata_phy: sata-phy@1b400000 {
 275                         compatible = "qcom,ipq806x-sata-phy";
 276                         reg = <0x1b400000 0x200>;
 277
 278                         clocks = <&gcc SATA_PHY_CFG_CLK>;
 279                         clock-names = "cfg";
 280
 281                         #phy-cells = <0>;
 282                         status = "disabled";
 283                 };
 284
 285                 sata@29000000 {
 286                         compatible = "qcom,ipq806x-ahci", "generic-ahci";
 287                         reg = <0x29000000 0x180>;
 288
 289                         interrupts = <0 209 0x0>;
 290
 291                         clocks = <&gcc SFAB_SATA_S_H_CLK>,
 292                                  <&gcc SATA_H_CLK>,
 293                                  <&gcc SATA_A_CLK>,
 294                                  <&gcc SATA_RXOOB_CLK>,
 295                                  <&gcc SATA_PMALIVE_CLK>;
 296                         clock-names = "slave_face", "iface", "core",
 297                                         "rxoob", "pmalive";
 298
 299                         assigned-clocks = <&gcc SATA_RXOOB_CLK>, <&gcc SATA_PMALIVE_CLK>;
 300                         assigned-clock-rates = <100000000>, <100000000>;
 301
 302                         phys = <&sata_phy>;
 303                         phy-names = "sata-phy";
 304                         status = "disabled";
 305                 };
 306
 307                 qcom,ssbi@500000 {
 308                         compatible = "qcom,ssbi";
 309                         reg = <0x00500000 0x1000>;
 310                         qcom,controller-type = "pmic-arbiter";
 311                 };
 312
 313                 gcc: clock-controller@900000 {
 314                         compatible = "qcom,gcc-ipq8064";
 315                         reg = <0x00900000 0x4000>;
 316                         #clock-cells = <1>;
 317                         #reset-cells = <1>;
 318                 };
 319
 320                 tcsr: syscon@1a400000 {
 321                         compatible = "qcom,tcsr-ipq8064", "syscon";
 322                         reg = <0x1a400000 0x100>;
 323                 };
 324
 325                 lcc: clock-controller@28000000 {
 326                         compatible = "qcom,lcc-ipq8064";
 327                         reg = <0x28000000 0x1000>;
 328                         #clock-cells = <1>;
 329                         #reset-cells = <1>;
 330                 };
 331
 332         };
 333 };