mm: hugetlb: fix hugepage memory leak caused by wrong reserve count
[linux/fpc-iii.git] / arch / arm / boot / dts / r8a7779-marzen.dts
blobfe396c8d58db798637a5fabaa74fe1f069c8089f
1 /*
2  * Device Tree Source for the Marzen board
3  *
4  * Copyright (C) 2013 Renesas Solutions Corp.
5  * Copyright (C) 2013 Simon Horman
6  *
7  * This file is licensed under the terms of the GNU General Public License
8  * version 2.  This program is licensed "as is" without any warranty of any
9  * kind, whether express or implied.
10  */
12 /dts-v1/;
13 #include "r8a7779.dtsi"
14 #include <dt-bindings/gpio/gpio.h>
15 #include <dt-bindings/interrupt-controller/irq.h>
17 / {
18         model = "marzen";
19         compatible = "renesas,marzen", "renesas,r8a7779";
21         aliases {
22                 serial0 = &scif2;
23                 serial1 = &scif4;
24         };
26         chosen {
27                 bootargs = "ignore_loglevel root=/dev/nfs ip=on";
28                 stdout-path = &scif2;
29         };
31         memory {
32                 device_type = "memory";
33                 reg = <0x60000000 0x40000000>;
34         };
36         fixedregulator3v3: fixedregulator@0 {
37                 compatible = "regulator-fixed";
38                 regulator-name = "fixed-3.3V";
39                 regulator-min-microvolt = <3300000>;
40                 regulator-max-microvolt = <3300000>;
41                 regulator-boot-on;
42                 regulator-always-on;
43         };
45         ethernet@18000000 {
46                 compatible = "smsc,lan9220", "smsc,lan9115";
47                 reg = <0x18000000 0x100>;
48                 pinctrl-0 = <&ethernet_pins>;
49                 pinctrl-names = "default";
51                 phy-mode = "mii";
52                 interrupt-parent = <&irqpin0>;
53                 interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
54                 smsc,irq-push-pull;
55                 reg-io-width = <4>;
56                 vddvario-supply = <&fixedregulator3v3>;
57                 vdd33a-supply = <&fixedregulator3v3>;
58         };
60         leds {
61                 compatible = "gpio-leds";
62                 led2 {
63                         gpios = <&gpio4 29 GPIO_ACTIVE_HIGH>;
64                 };
65                 led3 {
66                         gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>;
67                 };
68                 led4 {
69                         gpios = <&gpio4 31 GPIO_ACTIVE_HIGH>;
70                 };
71         };
73         vga-encoder {
74                 compatible = "adi,adv7123";
76                 ports {
77                         #address-cells = <1>;
78                         #size-cells = <0>;
80                         port@0 {
81                                 reg = <0>;
82                                 vga_enc_in: endpoint {
83                                         remote-endpoint = <&du_out_rgb0>;
84                                 };
85                         };
86                         port@1 {
87                                 reg = <1>;
88                                 vga_enc_out: endpoint {
89                                         remote-endpoint = <&vga_in>;
90                                 };
91                         };
92                 };
93         };
95         vga {
96                 compatible = "vga-connector";
98                 port {
99                         vga_in: endpoint {
100                                 remote-endpoint = <&vga_enc_out>;
101                         };
102                 };
103         };
105         lvds-encoder {
106                 compatible = "thine,thc63lvdm83d";
108                 ports {
109                         #address-cells = <1>;
110                         #size-cells = <0>;
112                         port@0 {
113                                 reg = <0>;
114                                 lvds_enc_in: endpoint {
115                                         remote-endpoint = <&du_out_rgb1>;
116                                 };
117                         };
118                         port@1 {
119                                 reg = <1>;
120                                 lvds_connector: endpoint {
121                                 };
122                         };
123                 };
124         };
126         x3_clk: x3-clock {
127                 compatible = "fixed-clock";
128                 #clock-cells = <0>;
129                 clock-frequency = <65000000>;
130         };
133 &du {
134         pinctrl-0 = <&du_pins>;
135         pinctrl-names = "default";
136         status = "okay";
138         clocks = <&mstp1_clks R8A7779_CLK_DU>, <&x3_clk>;
139         clock-names = "du", "dclkin.0";
141         ports {
142                 port@0 {
143                         endpoint {
144                                 remote-endpoint = <&vga_enc_in>;
145                         };
146                 };
147                 port@1 {
148                         endpoint {
149                                 remote-endpoint = <&lvds_enc_in>;
150                         };
151                 };
152         };
155 &irqpin0 {
156         status = "okay";
159 &extal_clk {
160         clock-frequency = <31250000>;
163 &tmu0 {
164         status = "okay";
167 &pfc {
168         du_pins: du {
169                 du0 {
170                         renesas,groups = "du0_rgb888", "du0_sync_1", "du0_clk_out_0";
171                         renesas,function = "du0";
172                 };
173                 du1 {
174                         renesas,groups = "du1_rgb666", "du1_sync_1", "du1_clk_out";
175                         renesas,function = "du1";
176                 };
177         };
179         ethernet_pins: ethernet {
180                 intc {
181                         renesas,groups = "intc_irq1_b";
182                         renesas,function = "intc";
183                 };
184                 lbsc {
185                         renesas,groups = "lbsc_ex_cs0";
186                         renesas,function = "lbsc";
187                 };
188         };
190         scif2_pins: serial2 {
191                 renesas,groups = "scif2_data_c";
192                 renesas,function = "scif2";
193         };
195         scif4_pins: serial4 {
196                 renesas,groups = "scif4_data";
197                 renesas,function = "scif4";
198         };
200         sdhi0_pins: sd0 {
201                 renesas,groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_cd";
202                 renesas,function = "sdhi0";
203         };
205         hspi0_pins: hspi0 {
206                 renesas,groups = "hspi0";
207                 renesas,function = "hspi0";
208         };
211 &scif2 {
212         pinctrl-0 = <&scif2_pins>;
213         pinctrl-names = "default";
215         status = "okay";
218 &scif4 {
219         pinctrl-0 = <&scif4_pins>;
220         pinctrl-names = "default";
222         status = "okay";
225 &sdhi0 {
226         pinctrl-0 = <&sdhi0_pins>;
227         pinctrl-names = "default";
229         vmmc-supply = <&fixedregulator3v3>;
230         bus-width = <4>;
231         status = "okay";
234 &hspi0 {
235         pinctrl-0 = <&hspi0_pins>;
236         pinctrl-names = "default";
237         status = "okay";