arch/arm/boot/dts/rk3288-veyron.dtsi

   1 /*
   2  * Google Veyron (and derivatives) board device tree source
   3  *
   4  * Copyright 2015 Google, Inc
   5  *
   6  * This file is dual-licensed: you can use it either under the terms
   7  * of the GPL or the X11 license, at your option. Note that this dual
   8  * licensing only applies to this file, and not this project as a
   9  * whole.
  10  *
  11  *  a) This file is free software; you can redistribute it and/or
  12  *     modify it under the terms of the GNU General Public License as
  13  *     published by the Free Software Foundation; either version 2 of the
  14  *     License, or (at your option) any later version.
  15  *
  16  *     This file is distributed in the hope that it will be useful,
  17  *     but WITHOUT ANY WARRANTY; without even the implied warranty of
  18  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  19  *     GNU General Public License for more details.
  20  *
  21  *  Or, alternatively,
  22  *
  23  *  b) Permission is hereby granted, free of charge, to any person
  24  *     obtaining a copy of this software and associated documentation
  25  *     files (the "Software"), to deal in the Software without
  26  *     restriction, including without limitation the rights to use,
  27  *     copy, modify, merge, publish, distribute, sublicense, and/or
  28  *     sell copies of the Software, and to permit persons to whom the
  29  *     Software is furnished to do so, subject to the following
  30  *     conditions:
  31  *
  32  *     The above copyright notice and this permission notice shall be
  33  *     included in all copies or substantial portions of the Software.
  34  *
  35  *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
  36  *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
  37  *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
  38  *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
  39  *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
  40  *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
  41  *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
  42  *     OTHER DEALINGS IN THE SOFTWARE.
  43  */
  44
  45 #include <dt-bindings/clock/rockchip,rk808.h>
  46 #include <dt-bindings/input/input.h>
  47 #include "rk3288.dtsi"
  48
  49 / {
  50         memory {
  51                 device_type = "memory";
  52                 reg = <0x0 0x80000000>;
  53         };
  54
  55         gpio_keys: gpio-keys {
  56                 compatible = "gpio-keys";
  57                 #address-cells = <1>;
  58                 #size-cells = <0>;
  59
  60                 pinctrl-names = "default";
  61                 pinctrl-0 = <&pwr_key_l>;
  62                 power {
  63                         label = "Power";
  64                         gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
  65                         linux,code = <KEY_POWER>;
  66                         debounce-interval = <100>;
  67                         gpio-key,wakeup;
  68                 };
  69         };
  70
  71         gpio-restart {
  72                 compatible = "gpio-restart";
  73                 gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
  74                 pinctrl-names = "default";
  75                 pinctrl-0 = <&ap_warm_reset_h>;
  76                 priority = <200>;
  77         };
  78
  79         emmc_pwrseq: emmc-pwrseq {
  80                 compatible = "mmc-pwrseq-emmc";
  81                 pinctrl-0 = <&emmc_reset>;
  82                 pinctrl-names = "default";
  83                 reset-gpios = <&gpio2 9 GPIO_ACTIVE_HIGH>;
  84         };
  85
  86         io_domains: io-domains {
  87                 compatible = "rockchip,rk3288-io-voltage-domain";
  88                 rockchip,grf = <&grf>;
  89
  90                 bb-supply = <&vcc33_io>;
  91                 dvp-supply = <&vcc_18>;
  92                 flash0-supply = <&vcc18_flashio>;
  93                 gpio1830-supply = <&vcc33_io>;
  94                 gpio30-supply = <&vcc33_io>;
  95                 lcdc-supply = <&vcc33_lcd>;
  96                 wifi-supply = <&vcc18_wl>;
  97         };
  98
  99         sdio_pwrseq: sdio-pwrseq {
 100                 compatible = "mmc-pwrseq-simple";
 101                 clocks = <&rk808 RK808_CLKOUT1>;
 102                 clock-names = "ext_clock";
 103                 pinctrl-names = "default";
 104                 pinctrl-0 = <&bt_enable_l>, <&wifi_enable_h>;
 105
 106                 /*
 107                  * On the module itself this is one of these (depending
 108                  * on the actual card populated):
 109                  * - SDIO_RESET_L_WL_REG_ON
 110                  * - PDN (power down when low)
 111                  */
 112                 reset-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>;
 113         };
 114
 115         vcc_5v: vcc-5v {
 116                 compatible = "regulator-fixed";
 117                 regulator-name = "vcc_5v";
 118                 regulator-always-on;
 119                 regulator-boot-on;
 120                 regulator-min-microvolt = <5000000>;
 121                 regulator-max-microvolt = <5000000>;
 122         };
 123
 124         vcc33_sys: vcc33-sys {
 125                 compatible = "regulator-fixed";
 126                 regulator-name = "vcc33_sys";
 127                 regulator-always-on;
 128                 regulator-boot-on;
 129                 regulator-min-microvolt = <3300000>;
 130                 regulator-max-microvolt = <3300000>;
 131         };
 132
 133         vcc50_hdmi: vcc50-hdmi {
 134                 compatible = "regulator-fixed";
 135                 regulator-name = "vcc50_hdmi";
 136                 regulator-always-on;
 137                 regulator-boot-on;
 138                 vin-supply = <&vcc_5v>;
 139         };
 140 };
 141
 142 &cpu0 {
 143         cpu0-supply = <&vdd_cpu>;
 144 };
 145
 146 &emmc {
 147         status = "okay";
 148
 149         broken-cd;
 150         bus-width = <8>;
 151         cap-mmc-highspeed;
 152         rockchip,default-sample-phase = <158>;
 153         disable-wp;
 154         mmc-hs200-1_8v;
 155         mmc-pwrseq = <&emmc_pwrseq>;
 156         non-removable;
 157         num-slots = <1>;
 158         pinctrl-names = "default";
 159         pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
 160 };
 161
 162 &hdmi {
 163         ddc-i2c-bus = <&i2c5>;
 164         status = "okay";
 165 };
 166
 167 &i2c0 {
 168         status = "okay";
 169
 170         clock-frequency = <400000>;
 171         i2c-scl-falling-time-ns = <50>;         /* 2.5ns measured */
 172         i2c-scl-rising-time-ns = <100>;         /* 45ns measured */
 173
 174         rk808: pmic@1b {
 175                 compatible = "rockchip,rk808";
 176                 reg = <0x1b>;
 177                 clock-output-names = "xin32k", "wifibt_32kin";
 178                 interrupt-parent = <&gpio0>;
 179                 interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
 180                 pinctrl-names = "default";
 181                 pinctrl-0 = <&pmic_int_l>;
 182                 rockchip,system-power-controller;
 183                 wakeup-source;
 184                 #clock-cells = <1>;
 185
 186                 vcc1-supply = <&vcc33_sys>;
 187                 vcc2-supply = <&vcc33_sys>;
 188                 vcc3-supply = <&vcc33_sys>;
 189                 vcc4-supply = <&vcc33_sys>;
 190                 vcc6-supply = <&vcc_5v>;
 191                 vcc7-supply = <&vcc33_sys>;
 192                 vcc8-supply = <&vcc33_sys>;
 193                 vcc12-supply = <&vcc_18>;
 194                 vddio-supply = <&vcc33_io>;
 195
 196                 regulators {
 197                         vdd_cpu: DCDC_REG1 {
 198                                 regulator-name = "vdd_arm";
 199                                 regulator-always-on;
 200                                 regulator-boot-on;
 201                                 regulator-min-microvolt = <750000>;
 202                                 regulator-max-microvolt = <1450000>;
 203                                 regulator-ramp-delay = <6001>;
 204                                 regulator-state-mem {
 205                                         regulator-off-in-suspend;
 206                                 };
 207                         };
 208
 209                         vdd_gpu: DCDC_REG2 {
 210                                 regulator-name = "vdd_gpu";
 211                                 regulator-always-on;
 212                                 regulator-boot-on;
 213                                 regulator-min-microvolt = <800000>;
 214                                 regulator-max-microvolt = <1250000>;
 215                                 regulator-ramp-delay = <6001>;
 216                                 regulator-state-mem {
 217                                         regulator-on-in-suspend;
 218                                         regulator-suspend-microvolt = <1000000>;
 219                                 };
 220                         };
 221
 222                         vcc135_ddr: DCDC_REG3 {
 223                                 regulator-name = "vcc135_ddr";
 224                                 regulator-always-on;
 225                                 regulator-boot-on;
 226                                 regulator-state-mem {
 227                                         regulator-on-in-suspend;
 228                                 };
 229                         };
 230
 231                         /*
 232                          * vcc_18 has several aliases.  (vcc18_flashio and
 233                          * vcc18_wl).  We'll add those aliases here just to
 234                          * make it easier to follow the schematic.  The signals
 235                          * are actually hooked together and only separated for
 236                          * power measurement purposes).
 237                          */
 238                         vcc18_wl: vcc18_flashio: vcc_18: DCDC_REG4 {
 239                                 regulator-name = "vcc_18";
 240                                 regulator-always-on;
 241                                 regulator-boot-on;
 242                                 regulator-min-microvolt = <1800000>;
 243                                 regulator-max-microvolt = <1800000>;
 244                                 regulator-state-mem {
 245                                         regulator-on-in-suspend;
 246                                         regulator-suspend-microvolt = <1800000>;
 247                                 };
 248                         };
 249
 250                         /*
 251                          * Note that both vcc33_io and vcc33_pmuio are always
 252                          * powered together. To simplify the logic in the dts
 253                          * we just refer to vcc33_io every time something is
 254                          * powered from vcc33_pmuio. In fact, on later boards
 255                          * (such as danger) they're the same net.
 256                          */
 257                         vcc33_io: LDO_REG1 {
 258                                 regulator-name = "vcc33_io";
 259                                 regulator-always-on;
 260                                 regulator-boot-on;
 261                                 regulator-min-microvolt = <3300000>;
 262                                 regulator-max-microvolt = <3300000>;
 263                                 regulator-state-mem {
 264                                         regulator-on-in-suspend;
 265                                         regulator-suspend-microvolt = <3300000>;
 266                                 };
 267                         };
 268
 269                         vdd_10: LDO_REG3 {
 270                                 regulator-name = "vdd_10";
 271                                 regulator-always-on;
 272                                 regulator-boot-on;
 273                                 regulator-min-microvolt = <1000000>;
 274                                 regulator-max-microvolt = <1000000>;
 275                                 regulator-state-mem {
 276                                         regulator-on-in-suspend;
 277                                         regulator-suspend-microvolt = <1000000>;
 278                                 };
 279                         };
 280
 281                         vdd10_lcd_pwren_h: LDO_REG7 {
 282                                 regulator-name = "vdd10_lcd_pwren_h";
 283                                 regulator-always-on;
 284                                 regulator-boot-on;
 285                                 regulator-min-microvolt = <2500000>;
 286                                 regulator-max-microvolt = <2500000>;
 287                                 regulator-state-mem {
 288                                         regulator-off-in-suspend;
 289                                 };
 290                         };
 291
 292                         vcc33_lcd: SWITCH_REG1 {
 293                                 regulator-name = "vcc33_lcd";
 294                                 regulator-always-on;
 295                                 regulator-boot-on;
 296                                 regulator-state-mem {
 297                                         regulator-off-in-suspend;
 298                                 };
 299                         };
 300                 };
 301         };
 302 };
 303
 304 &i2c1 {
 305         status = "okay";
 306
 307         clock-frequency = <400000>;
 308         i2c-scl-falling-time-ns = <50>;         /* 2.5ns measured */
 309         i2c-scl-rising-time-ns = <100>;         /* 40ns measured */
 310
 311         tpm: tpm@20 {
 312                 compatible = "infineon,slb9645tt";
 313                 reg = <0x20>;
 314                 powered-while-suspended;
 315         };
 316 };
 317
 318 &i2c2 {
 319         status = "okay";
 320
 321         /* 100kHz since 4.7k resistors don't rise fast enough */
 322         clock-frequency = <100000>;
 323         i2c-scl-falling-time-ns = <50>;         /* 10ns measured */
 324         i2c-scl-rising-time-ns = <800>;         /* 600ns measured */
 325 };
 326
 327 &i2c4 {
 328         status = "okay";
 329
 330         clock-frequency = <400000>;
 331         i2c-scl-falling-time-ns = <50>;         /* 11ns measured */
 332         i2c-scl-rising-time-ns = <300>;         /* 225ns measured */
 333 };
 334
 335 &i2c5 {
 336         status = "okay";
 337
 338         clock-frequency = <100000>;
 339         i2c-scl-falling-time-ns = <300>;
 340         i2c-scl-rising-time-ns = <1000>;
 341 };
 342
 343 &pwm1 {
 344         status = "okay";
 345 };
 346
 347 &sdio0 {
 348         status = "okay";
 349
 350         broken-cd;
 351         bus-width = <4>;
 352         cap-sd-highspeed;
 353         cap-sdio-irq;
 354         keep-power-in-suspend;
 355         mmc-pwrseq = <&sdio_pwrseq>;
 356         non-removable;
 357         num-slots = <1>;
 358         pinctrl-names = "default";
 359         pinctrl-0 = <&sdio0_clk &sdio0_cmd &sdio0_bus4>;
 360         sd-uhs-sdr12;
 361         sd-uhs-sdr25;
 362         sd-uhs-sdr50;
 363         sd-uhs-sdr104;
 364         vmmc-supply = <&vcc33_sys>;
 365         vqmmc-supply = <&vcc18_wl>;
 366 };
 367
 368 &spi2 {
 369         status = "okay";
 370
 371         rx-sample-delay-ns = <12>;
 372 };
 373
 374 &tsadc {
 375         status = "okay";
 376
 377         rockchip,hw-tshut-mode = <1>; /* tshut mode 0:CRU 1:GPIO */
 378         rockchip,hw-tshut-polarity = <1>; /* tshut polarity 0:LOW 1:HIGH */
 379 };
 380
 381 &uart0 {
 382         status = "okay";
 383
 384         /* We need to go faster than 24MHz, so adjust clock parents / rates */
 385         assigned-clocks = <&cru SCLK_UART0>;
 386         assigned-clock-rates = <48000000>;
 387
 388         /* Pins don't include flow control by default; add that in */
 389         pinctrl-names = "default";
 390         pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
 391 };
 392
 393 &uart1 {
 394         status = "okay";
 395 };
 396
 397 &uart2 {
 398         status = "okay";
 399 };
 400
 401 &usbphy {
 402         status = "okay";
 403 };
 404
 405 &usb_host0_ehci {
 406         status = "okay";
 407
 408         needs-reset-on-resume;
 409 };
 410
 411 &usb_host1 {
 412         status = "okay";
 413 };
 414
 415 &usb_otg {
 416         status = "okay";
 417
 418         assigned-clocks = <&cru SCLK_USBPHY480M_SRC>;
 419         assigned-clock-parents = <&cru SCLK_OTGPHY0>;
 420         dr_mode = "host";
 421 };
 422
 423 &vopb {
 424         status = "okay";
 425 };
 426
 427 &vopb_mmu {
 428         status = "okay";
 429 };
 430
 431 &wdt {
 432         status = "okay";
 433 };
 434
 435 &pinctrl {
 436         pinctrl-names = "default", "sleep";
 437         pinctrl-0 = <
 438                 /* Common for sleep and wake, but no owners */
 439                 &global_pwroff
 440         >;
 441         pinctrl-1 = <
 442                 /* Common for sleep and wake, but no owners */
 443                 &global_pwroff
 444         >;
 445
 446         pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma {
 447                 bias-disable;
 448                 drive-strength = <8>;
 449         };
 450
 451         pcfg_pull_up_drv_8ma: pcfg-pull-up-drv-8ma {
 452                 bias-pull-up;
 453                 drive-strength = <8>;
 454         };
 455
 456         pcfg_output_high: pcfg-output-high {
 457                 output-high;
 458         };
 459
 460         pcfg_output_low: pcfg-output-low {
 461                 output-low;
 462         };
 463
 464         buttons {
 465                 pwr_key_l: pwr-key-l {
 466                         rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>;
 467                 };
 468         };
 469
 470         emmc {
 471                 emmc_reset: emmc-reset {
 472                         rockchip,pins = <2 9 RK_FUNC_GPIO &pcfg_pull_none>;
 473                 };
 474
 475                 /*
 476                  * We run eMMC at max speed; bump up drive strength.
 477                  * We also have external pulls, so disable the internal ones.
 478                  */
 479                 emmc_clk: emmc-clk {
 480                         rockchip,pins = <3 18 RK_FUNC_2 &pcfg_pull_none_drv_8ma>;
 481                 };
 482
 483                 emmc_cmd: emmc-cmd {
 484                         rockchip,pins = <3 16 RK_FUNC_2 &pcfg_pull_none_drv_8ma>;
 485                 };
 486
 487                 emmc_bus8: emmc-bus8 {
 488                         rockchip,pins = <3 0 RK_FUNC_2 &pcfg_pull_none_drv_8ma>,
 489                                         <3 1 RK_FUNC_2 &pcfg_pull_none_drv_8ma>,
 490                                         <3 2 RK_FUNC_2 &pcfg_pull_none_drv_8ma>,
 491                                         <3 3 RK_FUNC_2 &pcfg_pull_none_drv_8ma>,
 492                                         <3 4 RK_FUNC_2 &pcfg_pull_none_drv_8ma>,
 493                                         <3 5 RK_FUNC_2 &pcfg_pull_none_drv_8ma>,
 494                                         <3 6 RK_FUNC_2 &pcfg_pull_none_drv_8ma>,
 495                                         <3 7 RK_FUNC_2 &pcfg_pull_none_drv_8ma>;
 496                 };
 497         };
 498
 499         pmic {
 500                 pmic_int_l: pmic-int-l {
 501                         rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO &pcfg_pull_up>;
 502                 };
 503         };
 504
 505         reboot {
 506                 ap_warm_reset_h: ap-warm-reset-h {
 507                         rockchip,pins = <RK_GPIO0 13 RK_FUNC_GPIO &pcfg_pull_none>;
 508                 };
 509         };
 510
 511         recovery-switch {
 512                 rec_mode_l: rec-mode-l {
 513                         rockchip,pins = <0 9 RK_FUNC_GPIO &pcfg_pull_up>;
 514                 };
 515         };
 516
 517         sdio0 {
 518                 wifi_enable_h: wifienable-h {
 519                         rockchip,pins = <4 28 RK_FUNC_GPIO &pcfg_pull_none>;
 520                 };
 521
 522                 /* NOTE: mislabelled on schematic; should be bt_enable_h */
 523                 bt_enable_l: bt-enable-l {
 524                         rockchip,pins = <4 29 RK_FUNC_GPIO &pcfg_pull_none>;
 525                 };
 526
 527                 /*
 528                  * We run sdio0 at max speed; bump up drive strength.
 529                  * We also have external pulls, so disable the internal ones.
 530                  */
 531                 sdio0_bus4: sdio0-bus4 {
 532                         rockchip,pins = <4 20 RK_FUNC_1 &pcfg_pull_none_drv_8ma>,
 533                                         <4 21 RK_FUNC_1 &pcfg_pull_none_drv_8ma>,
 534                                         <4 22 RK_FUNC_1 &pcfg_pull_none_drv_8ma>,
 535                                         <4 23 RK_FUNC_1 &pcfg_pull_none_drv_8ma>;
 536                 };
 537
 538                 sdio0_cmd: sdio0-cmd {
 539                         rockchip,pins = <4 24 RK_FUNC_1 &pcfg_pull_none_drv_8ma>;
 540                 };
 541
 542                 sdio0_clk: sdio0-clk {
 543                         rockchip,pins = <4 25 RK_FUNC_1 &pcfg_pull_none_drv_8ma>;
 544                 };
 545         };
 546
 547         tpm {
 548                 tpm_int_h: tpm-int-h {
 549                         rockchip,pins = <7 4 RK_FUNC_GPIO &pcfg_pull_none>;
 550                 };
 551         };
 552
 553         write-protect {
 554                 fw_wp_ap: fw-wp-ap {
 555                         rockchip,pins = <7 6 RK_FUNC_GPIO &pcfg_pull_none>;
 556                 };
 557         };
 558 };