| blob | e80e42163883610005287282d9673c80377b6ce4 |
1 /*
2 * Copyright 2011 ST-Ericsson AB
3 *
4 * The code contained herein is licensed under the GNU General Public
5 * License. You may obtain a copy of the GNU General Public License
6 * Version 2 or later at the following locations:
7 *
8 * http://www.opensource.org/licenses/gpl-license.html
9 * http://www.gnu.org/copyleft/gpl.html
10 */
12 /dts-v1/;
13 #include "ste-dbx5x0.dtsi"
14 #include "ste-href-ab8500.dtsi"
15 #include "ste-href-family-pinctrl.dtsi"
17 / {
18 model = "Calao Systems Snowball platform with device tree";
19 compatible = "calaosystems,snowball-a9500", "st-ericsson,u9500";
21 /* This stablilizes the serial port enumeration */
22 aliases {
23 serial0 = &ux500_serial0;
24 serial1 = &ux500_serial1;
25 serial2 = &ux500_serial2;
26 };
28 memory {
29 reg = <0x00000000 0x20000000>;
30 };
32 en_3v3_reg: en_3v3 {
33 compatible = "regulator-fixed";
34 regulator-name = "en-3v3-fixed-supply";
35 regulator-min-microvolt = <3300000>;
36 regulator-max-microvolt = <3300000>;
37 /* AB8500 GPIOs start from 1 - offset 25 is GPIO26. */
38 gpio = <&ab8500_gpio 25 0x4>;
39 startup-delay-us = <5000>;
40 enable-active-high;
41 };
43 gpio_keys {
44 compatible = "gpio-keys";
45 #address-cells = <1>;
46 #size-cells = <0>;
48 button@1 {
49 debounce_interval = <50>;
50 wakeup-source;
51 linux,code = <2>;
52 label = "userpb";
53 gpios = <&gpio1 0 0x4>;
54 };
55 button@2 {
56 debounce_interval = <50>;
57 wakeup-source;
58 linux,code = <3>;
59 label = "extkb1";
60 gpios = <&gpio4 23 0x4>;
61 };
62 button@3 {
63 debounce_interval = <50>;
64 wakeup-source;
65 linux,code = <4>;
66 label = "extkb2";
67 gpios = <&gpio4 24 0x4>;
68 };
69 button@4 {
70 debounce_interval = <50>;
71 wakeup-source;
72 linux,code = <5>;
73 label = "extkb3";
74 gpios = <&gpio5 1 0x4>;
75 };
76 button@5 {
77 debounce_interval = <50>;
78 wakeup-source;
79 linux,code = <6>;
80 label = "extkb4";
81 gpios = <&gpio5 2 0x4>;
82 };
83 };
85 leds {
86 compatible = "gpio-leds";
87 pinctrl-names = "default";
88 pinctrl-0 = <&gpioled_snowball_mode>;
89 used-led {
90 label = "user_led";
91 gpios = <&gpio4 14 0x4>;
92 default-state = "on";
93 linux,default-trigger = "heartbeat";
94 };
95 };
97 soc {
98 usb_per5@a03e0000 {
99 pinctrl-names = "default", "sleep";
100 pinctrl-0 = <&musb_default_mode>;
101 pinctrl-1 = <&musb_sleep_mode>;
102 };
104 sound {
105 compatible = "stericsson,snd-soc-mop500";
107 stericsson,cpu-dai = <&msp1 &msp3>;
108 stericsson,audio-codec = <&codec>;
109 };
111 msp0: msp@80123000 {
112 pinctrl-names = "default";
113 pinctrl-0 = <&msp0_default_mode>;
114 status = "okay";
115 };
117 msp1: msp@80124000 {
118 pinctrl-names = "default";
119 pinctrl-0 = <&msp1_default_mode>;
120 status = "okay";
121 };
123 msp2: msp@80117000 {
124 pinctrl-names = "default";
125 pinctrl-0 = <&msp2_default_mode>;
126 };
128 msp3: msp@80125000 {
129 status = "okay";
130 };
132 external-bus@50000000 {
133 status = "okay";
135 ethernet@0 {
136 compatible = "smsc,lan9115";
137 reg = <0 0x10000>;
138 interrupts = <12 IRQ_TYPE_EDGE_RISING>;
139 interrupt-parent = <&gpio4>;
140 vdd33a-supply = <&en_3v3_reg>;
141 vddvario-supply = <&db8500_vape_reg>;
142 pinctrl-names = "default";
143 pinctrl-0 = <ð_snowball_mode>;
145 reg-shift = <1>;
146 reg-io-width = <2>;
147 smsc,force-internal-phy;
148 smsc,irq-active-high;
149 smsc,irq-push-pull;
151 clocks = <&prcc_pclk 3 0>;
152 };
153 };
155 vmmci: regulator-gpio {
156 compatible = "regulator-gpio";
158 gpios = <&gpio7 4 0x4>;
159 enable-gpio = <&gpio6 25 0x4>;
161 regulator-min-microvolt = <1800000>;
162 regulator-max-microvolt = <2900000>;
163 regulator-name = "mmci-reg";
164 regulator-type = "voltage";
166 startup-delay-us = <100>;
167 enable-active-high;
169 states = <1800000 0x1
170 2900000 0x0>;
171 };
173 // External Micro SD slot
174 sdi0_per1@80126000 {
175 arm,primecell-periphid = <0x10480180>;
176 max-frequency = <100000000>;
177 bus-width = <4>;
178 cap-mmc-highspeed;
179 vmmc-supply = <&ab8500_ldo_aux3_reg>;
180 vqmmc-supply = <&vmmci>;
181 pinctrl-names = "default", "sleep";
182 pinctrl-0 = <&sdi0_default_mode>;
183 pinctrl-1 = <&sdi0_sleep_mode>;
185 cd-gpios = <&gpio6 26 0x4>; // 218
186 cd-inverted;
188 status = "okay";
189 };
191 // WLAN SDIO channel
192 sdi1_per2@80118000 {
193 arm,primecell-periphid = <0x10480180>;
194 max-frequency = <100000000>;
195 bus-width = <4>;
196 pinctrl-names = "default", "sleep";
197 pinctrl-0 = <&sdi1_default_mode>;
198 pinctrl-1 = <&sdi1_sleep_mode>;
200 status = "okay";
201 };
203 // Unused PoP eMMC - register and put it to sleep by default */
204 sdi2_per3@80005000 {
205 arm,primecell-periphid = <0x10480180>;
206 pinctrl-names = "default";
207 pinctrl-0 = <&sdi2_sleep_mode>;
209 status = "okay";
210 };
212 // On-board eMMC
213 sdi4_per2@80114000 {
214 arm,primecell-periphid = <0x10480180>;
215 max-frequency = <100000000>;
216 bus-width = <8>;
217 cap-mmc-highspeed;
218 vmmc-supply = <&ab8500_ldo_aux2_reg>;
219 pinctrl-names = "default", "sleep";
220 pinctrl-0 = <&sdi4_default_mode>;
221 pinctrl-1 = <&sdi4_sleep_mode>;
223 status = "okay";
224 };
226 uart@80120000 {
227 pinctrl-names = "default", "sleep";
228 pinctrl-0 = <&uart0_default_mode>;
229 pinctrl-1 = <&uart0_sleep_mode>;
230 status = "okay";
231 };
233 /* This UART is unused and thus left disabled */
234 uart@80121000 {
235 pinctrl-names = "default", "sleep";
236 pinctrl-0 = <&uart1_default_mode>;
237 pinctrl-1 = <&uart1_sleep_mode>;
238 };
240 uart@80007000 {
241 pinctrl-names = "default", "sleep";
242 pinctrl-0 = <&uart2_default_mode>;
243 pinctrl-1 = <&uart2_sleep_mode>;
244 status = "okay";
245 };
247 i2c@80004000 {
248 pinctrl-names = "default","sleep";
249 pinctrl-0 = <&i2c0_default_mode>;
250 pinctrl-1 = <&i2c0_sleep_mode>;
251 };
253 i2c@80122000 {
254 pinctrl-names = "default","sleep";
255 pinctrl-0 = <&i2c1_default_mode>;
256 pinctrl-1 = <&i2c1_sleep_mode>;
257 };
259 i2c@80128000 {
260 pinctrl-names = "default","sleep";
261 pinctrl-0 = <&i2c2_default_mode>;
262 pinctrl-1 = <&i2c2_sleep_mode>;
263 lsm303dlh@18 {
264 /* Accelerometer */
265 compatible = "st,lsm303dlh-accel";
266 st,drdy-int-pin = <1>;
267 reg = <0x18>;
268 vdd-supply = <&ab8500_ldo_aux1_reg>;
269 vddio-supply = <&db8500_vsmps2_reg>;
270 pinctrl-names = "default";
271 pinctrl-0 = <&accel_snowball_mode>;
272 interrupt-parent = <&gpio5>;
273 interrupts = <3 IRQ_TYPE_EDGE_RISING>, /* INT1 */
274 <4 IRQ_TYPE_EDGE_RISING>; /* INT2 */
275 };
276 lsm303dlh@1e {
277 /* Magnetometer */
278 compatible = "st,lsm303dlh-magn";
279 reg = <0x1e>;
280 vdd-supply = <&ab8500_ldo_aux1_reg>;
281 vddio-supply = <&db8500_vsmps2_reg>;
282 pinctrl-names = "default";
283 pinctrl-0 = <&magneto_snowball_mode>;
284 gpios = <&gpio5 5 0x4>; /* DRDY line */
285 };
286 l3g4200d@68 {
287 /* Gyroscope */
288 compatible = "st,l3g4200d-gyro";
289 st,drdy-int-pin = <2>;
290 reg = <0x68>;
291 vdd-supply = <&ab8500_ldo_aux1_reg>;
292 vddio-supply = <&db8500_vsmps2_reg>;
293 pinctrl-names = "default";
294 pinctrl-0 = <&gyro_snowball_mode>;
295 gpios = <&gpio5 6 0x4>; /* DRDY line */
296 interrupt-parent = <&gpio5>;
297 interrupts = <9 IRQ_TYPE_EDGE_RISING>; /* INT1 */
298 };
299 lsp001wm@5c {
300 /* Barometer/pressure sensor */
301 compatible = "st,lps001wp-press";
302 reg = <0x5c>;
303 vdd-supply = <&ab8500_ldo_aux1_reg>;
304 vddio-supply = <&db8500_vsmps2_reg>;
305 };
306 };
308 i2c@80110000 {
309 pinctrl-names = "default","sleep";
310 pinctrl-0 = <&i2c3_default_mode>;
311 pinctrl-1 = <&i2c3_sleep_mode>;
312 };
314 ssp@80002000 {
315 pinctrl-names = "default";
316 pinctrl-0 = <&ssp0_snowball_mode>;
317 };
319 cpufreq-cooling {
320 status = "okay";
321 };
323 prcmu@80157000 {
324 cpufreq {
325 status = "okay";
326 };
328 thermal@801573c0 {
329 num-trips = <4>;
331 trip0-temp = <70000>;
332 trip0-type = "active";
333 trip0-cdev-num = <1>;
334 trip0-cdev-name0 = "thermal-cpufreq-0";
336 trip1-temp = <75000>;
337 trip1-type = "active";
338 trip1-cdev-num = <1>;
339 trip1-cdev-name0 = "thermal-cpufreq-0";
341 trip2-temp = <80000>;
342 trip2-type = "active";
343 trip2-cdev-num = <1>;
344 trip2-cdev-name0 = "thermal-cpufreq-0";
346 trip3-temp = <85000>;
347 trip3-type = "critical";
348 trip3-cdev-num = <0>;
350 status = "okay";
351 };
353 ab8500 {
354 ab8500-gpio {
355 compatible = "stericsson,ab8500-gpio";
356 };
358 ext_regulators: ab8500-ext-regulators {
359 ab8500_ext1_reg: ab8500_ext1 {
360 regulator-name = "ab8500-ext-supply1";
361 };
363 ab8500_ext2_reg_reg: ab8500_ext2 {
364 regulator-name = "ab8500-ext-supply2";
365 };
367 ab8500_ext3_reg_reg: ab8500_ext3 {
368 regulator-name = "ab8500-ext-supply3";
369 };
370 };
372 ab8500-regulators {
373 ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
374 regulator-name = "V-DISPLAY";
375 };
377 ab8500_ldo_aux2_reg: ab8500_ldo_aux2 {
378 regulator-name = "V-eMMC1";
379 };
381 ab8500_ldo_aux3_reg: ab8500_ldo_aux3 {
382 regulator-name = "V-MMC-SD";
383 };
385 ab8500_ldo_intcore_reg: ab8500_ldo_intcore {
386 regulator-name = "V-INTCORE";
387 };
389 ab8500_ldo_tvout_reg: ab8500_ldo_tvout {
390 regulator-name = "V-TVOUT";
391 };
393 ab8500_ldo_usb_reg: ab8500_ldo_usb {
394 regulator-name = "dummy";
395 };
397 ab8500_ldo_audio_reg: ab8500_ldo_audio {
398 regulator-name = "V-AUD";
399 };
401 ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 {
402 regulator-name = "V-AMIC1";
403 };
405 ab8500_ldo_anamic2_reg: ab8500_ldo_anamic2 {
406 regulator-name = "V-AMIC2";
407 };
409 ab8500_ldo_dmic_reg: ab8500_ldo_dmic {
410 regulator-name = "V-DMIC";
411 };
413 ab8500_ldo_ana_reg: ab8500_ldo_ana {
414 regulator-name = "V-CSI/DSI";
415 };
416 };
417 };
418 };
420 pinctrl {
421 /*
422 * Set this up using hogs, as time goes by and as seems fit, these
423 * can be moved over to being controlled by respective device.
424 */
425 pinctrl-names = "default";
426 pinctrl-0 = <&gbf_snowball_mode>,
427 <&wlan_snowball_mode>;
429 ethernet {
430 /*
431 * Mux in "SM" which is used for the
432 * SMSC911x Ethernet adapter
433 */
434 eth_snowball_mode: eth_snowball {
435 snowball_mux {
436 function = "sm";
437 groups = "sm_b_1";
438 };
439 /* LAN IRQ pin */
440 snowball_cfg1 {
441 pins = "GPIO140_B11";
442 ste,config = <&in_nopull>;
443 };
444 /* LAN reset pin */
445 snowball_cfg2 {
446 pins = "GPIO141_C12";
447 ste,config = <&gpio_out_hi>;
448 };
450 };
451 };
452 sdi0 {
453 sdi0_default_mode: sdi0_default {
454 snowball_mux {
455 function = "mc0";
456 groups = "mc0dat31dir_a_1";
457 };
458 snowball_cfg1 {
459 pins = "GPIO21_AB3"; /* DAT31DIR */
460 ste,config = <&out_hi>;
461 };
462 /* SD card detect GPIO pin, extend default state */
463 snowball_cfg2 {
464 pins = "GPIO218_AH11";
465 ste,config = <&gpio_in_pu>;
466 };
467 /* VMMCI level-shifter enable */
468 snowball_cfg3 {
469 pins = "GPIO217_AH12";
470 ste,config = <&gpio_out_lo>;
471 };
472 /* VMMCI level-shifter voltage select */
473 snowball_cfg4 {
474 pins = "GPIO228_AJ6";
475 ste,config = <&gpio_out_hi>;
476 };
477 };
478 };
479 ssp0 {
480 ssp0_snowball_mode: ssp0_snowball_default {
481 snowball_mux {
482 function = "ssp0";
483 groups = "ssp0_a_1";
484 };
485 snowball_cfg1 {
486 pins = "GPIO144_B13"; /* FRM */
487 ste,config = <&gpio_out_hi>;
488 };
489 snowball_cfg2 {
490 pins = "GPIO145_C13"; /* RXD */
491 ste,config = <&in_pd>;
492 };
493 snowball_cfg3 {
494 pins =
495 "GPIO146_D13", /* TXD */
496 "GPIO143_D12"; /* CLK */
497 ste,config = <&out_lo>;
498 };
500 };
501 };
502 gpio_led {
503 gpioled_snowball_mode: gpioled_default {
504 snowball_cfg1 {
505 pins = "GPIO142_C11";
506 ste,config = <&gpio_out_hi>;
507 };
509 };
510 };
511 accelerometer {
512 accel_snowball_mode: accel_snowball {
513 /* Accelerometer lines */
514 snowball_cfg1 {
515 pins =
516 "GPIO163_C20", /* ACCEL_IRQ1 */
517 "GPIO164_B21"; /* ACCEL_IRQ2 */
518 ste,config = <&gpio_in_pu>;
519 };
520 };
521 };
522 gyro {
523 gyro_snowball_mode: gyro_snowball {
524 snowball_cfg1 {
525 pins =
526 "GPIO166_A22", /* DRDY */
527 "GPIO169_D22"; /* INT */
528 ste,config = <&gpio_in_pu>;
529 };
530 };
531 };
532 magnetometer {
533 magneto_snowball_mode: magneto_snowball {
534 snowball_cfg1 {
535 pins = "GPIO165_C21"; /* MAG_DRDY */
536 ste,config = <&gpio_in_pu>;
537 };
538 };
539 };
540 gbf {
541 gbf_snowball_mode: gbf_snowball {
542 /*
543 * GBF (GPS, Bluetooth, FM-radio) interface,
544 * pull low to reset state
545 */
546 snowball_cfg1 {
547 pins = "GPIO171_D23"; /* GBF_ENA_RESET */
548 ste,config = <&gpio_out_lo>;
549 };
550 };
551 };
552 wlan {
553 wlan_snowball_mode: wlan_snowball {
554 /*
555 * Activate this mode with the WLAN chip.
556 * These are plain GPIO pins used by WLAN
557 */
558 snowball_cfg1 {
559 pins =
560 "GPIO161_D21", /* WLAN_PMU_EN */
561 "GPIO215_AH13"; /* WLAN_ENA */
562 ste,config = <&gpio_out_lo>;
563 };
564 snowball_cfg2 {
565 pins = "GPIO216_AG12"; /* WLAN_IRQ */
566 ste,config = <&gpio_in_pu>;
567 };
568 };
569 };
570 };
572 mcde@a0350000 {
573 pinctrl-names = "default", "sleep";
574 pinctrl-0 = <&lcd_default_mode>;
575 pinctrl-1 = <&lcd_sleep_mode>;
576 };
577 };
578 };