arch/arm/boot/dts/usb_a9260_common.dtsi

   1 /*
   2  * usb_a926x.dts - Device Tree file for Caloa USB A926x board
   3  *
   4  *  Copyright (C) 2011-2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
   5  *
   6  * Licensed under GPLv2 or later.
   7  */
   8
   9 / {
  10         clocks {
  11                 #address-cells = <1>;
  12                 #size-cells = <1>;
  13                 ranges;
  14
  15                 main_clock: clock@0 {
  16                         compatible = "atmel,osc", "fixed-clock";
  17                         clock-frequency = <12000000>;
  18                 };
  19
  20                 slow_xtal {
  21                         clock-frequency = <32768>;
  22                 };
  23
  24                 main_xtal {
  25                         clock-frequency = <12000000>;
  26                 };
  27         };
  28
  29         ahb {
  30                 apb {
  31                         dbgu: serial@fffff200 {
  32                                 status = "okay";
  33                         };
  34
  35                         macb0: ethernet@fffc4000 {
  36                                 phy-mode = "rmii";
  37                                 status = "okay";
  38                         };
  39
  40                         usb1: gadget@fffa4000 {
  41                                 atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>;
  42                                 status = "okay";
  43                         };
  44                 };
  45
  46                 nand0: nand@40000000 {
  47                         nand-bus-width = <8>;
  48                         nand-ecc-mode = "soft";
  49                         nand-on-flash-bbt;
  50                         status = "okay";
  51
  52                         at91bootstrap@0 {
  53                                 label = "at91bootstrap";
  54                                 reg = <0x0 0x20000>;
  55                         };
  56
  57                         barebox@20000 {
  58                                 label = "barebox";
  59                                 reg = <0x20000 0x40000>;
  60                         };
  61
  62                         bareboxenv@60000 {
  63                                 label = "bareboxenv";
  64                                 reg = <0x60000 0x20000>;
  65                         };
  66
  67                         bareboxenv2@80000 {
  68                                 label = "bareboxenv2";
  69                                 reg = <0x80000 0x20000>;
  70                         };
  71
  72                         oftree@80000 {
  73                                 label = "oftree";
  74                                 reg = <0xa0000 0x20000>;
  75                         };
  76
  77                         kernel@a0000 {
  78                                 label = "kernel";
  79                                 reg = <0xc0000 0x400000>;
  80                         };
  81
  82                         rootfs@4a0000 {
  83                                 label = "rootfs";
  84                                 reg = <0x4c0000 0x7800000>;
  85                         };
  86
  87                         data@7ca0000 {
  88                                 label = "data";
  89                                 reg = <0x7cc0000 0x8340000>;
  90                         };
  91                 };
  92
  93                 usb0: ohci@00500000 {
  94                         num-ports = <2>;
  95                         status = "okay";
  96                 };
  97         };
  98
  99         leds {
 100                 compatible = "gpio-leds";
 101
 102                 user_led {
 103                         label = "user_led";
 104                         gpios = <&pioB 21 GPIO_ACTIVE_LOW>;
 105                         linux,default-trigger = "heartbeat";
 106                 };
 107         };
 108
 109         gpio_keys {
 110                 compatible = "gpio-keys";
 111                 #address-cells = <1>;
 112                 #size-cells = <0>;
 113
 114                 user_pb {
 115                         label = "user_pb";
 116                         gpios = <&pioB 10 GPIO_ACTIVE_LOW>;
 117                         linux,code = <28>;
 118                         wakeup-source;
 119                 };
 120         };
 121
 122         i2c@0 {
 123                 status = "okay";
 124         };
 125 };