arch/arm/mach-omap2/omap_phy_internal.c

   1 /*
   2   * This file configures the internal USB PHY in OMAP4430. Used
   3   * with TWL6030 transceiver and MUSB on OMAP4430.
   4   *
   5   * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com
   6   * This program is free software; you can redistribute it and/or modify
   7   * it under the terms of the GNU General Public License as published by
   8   * the Free Software Foundation; either version 2 of the License, or
   9   * (at your option) any later version.
  10   *
  11   * Author: Hema HK <hemahk@ti.com>
  12   *
  13   * This program is distributed in the hope that it will be useful,
  14   * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15   * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  16   * GNU General Public License for more details.
  17   *
  18   * You should have received a copy of the GNU General Public License
  19   * along with this program; if not, write to the Free Software
  20   * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  21   *
  22   */
  23
  24 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
  25
  26 #include <linux/types.h>
  27 #include <linux/delay.h>
  28 #include <linux/clk.h>
  29 #include <linux/io.h>
  30 #include <linux/err.h>
  31 #include <linux/usb.h>
  32 #include <linux/usb/musb.h>
  33
  34 #include "soc.h"
  35 #include "control.h"
  36 #include "usb.h"
  37
  38 #define CONTROL_DEV_CONF                0x300
  39 #define PHY_PD                          0x1
  40
  41 /**
  42  * omap4430_phy_power_down: disable MUSB PHY during early init
  43  *
  44  * OMAP4 MUSB PHY module is enabled by default on reset, but this will
  45  * prevent core retention if not disabled by SW. USB driver will
  46  * later on enable this, once and if the driver needs it.
  47  */
  48 static int __init omap4430_phy_power_down(void)
  49 {
  50         void __iomem *ctrl_base;
  51
  52         if (!cpu_is_omap44xx())
  53                 return 0;
  54
  55         ctrl_base = ioremap(OMAP443X_SCM_BASE, SZ_1K);
  56         if (!ctrl_base) {
  57                 pr_err("control module ioremap failed\n");
  58                 return -ENOMEM;
  59         }
  60
  61         /* Power down the phy */
  62         writel_relaxed(PHY_PD, ctrl_base + CONTROL_DEV_CONF);
  63
  64         iounmap(ctrl_base);
  65
  66         return 0;
  67 }
  68 omap_early_initcall(omap4430_phy_power_down);
  69
  70 void am35x_musb_reset(void)
  71 {
  72         u32     regval;
  73
  74         /* Reset the musb interface */
  75         regval = omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET);
  76
  77         regval |= AM35XX_USBOTGSS_SW_RST;
  78         omap_ctrl_writel(regval, AM35XX_CONTROL_IP_SW_RESET);
  79
  80         regval &= ~AM35XX_USBOTGSS_SW_RST;
  81         omap_ctrl_writel(regval, AM35XX_CONTROL_IP_SW_RESET);
  82
  83         regval = omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET);
  84 }
  85
  86 void am35x_musb_phy_power(u8 on)
  87 {
  88         unsigned long timeout = jiffies + msecs_to_jiffies(100);
  89         u32 devconf2;
  90
  91         if (on) {
  92                 /*
  93                  * Start the on-chip PHY and its PLL.
  94                  */
  95                 devconf2 = omap_ctrl_readl(AM35XX_CONTROL_DEVCONF2);
  96
  97                 devconf2 &= ~(CONF2_RESET | CONF2_PHYPWRDN | CONF2_OTGPWRDN);
  98                 devconf2 |= CONF2_PHY_PLLON;
  99
 100                 omap_ctrl_writel(devconf2, AM35XX_CONTROL_DEVCONF2);
 101
 102                 pr_info("Waiting for PHY clock good...\n");
 103                 while (!(omap_ctrl_readl(AM35XX_CONTROL_DEVCONF2)
 104                                 & CONF2_PHYCLKGD)) {
 105                         cpu_relax();
 106
 107                         if (time_after(jiffies, timeout)) {
 108                                 pr_err("musb PHY clock good timed out\n");
 109                                 break;
 110                         }
 111                 }
 112         } else {
 113                 /*
 114                  * Power down the on-chip PHY.
 115                  */
 116                 devconf2 = omap_ctrl_readl(AM35XX_CONTROL_DEVCONF2);
 117
 118                 devconf2 &= ~CONF2_PHY_PLLON;
 119                 devconf2 |=  CONF2_PHYPWRDN | CONF2_OTGPWRDN;
 120                 omap_ctrl_writel(devconf2, AM35XX_CONTROL_DEVCONF2);
 121         }
 122 }
 123
 124 void am35x_musb_clear_irq(void)
 125 {
 126         u32 regval;
 127
 128         regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR);
 129         regval |= AM35XX_USBOTGSS_INT_CLR;
 130         omap_ctrl_writel(regval, AM35XX_CONTROL_LVL_INTR_CLEAR);
 131         regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR);
 132 }
 133
 134 void am35x_set_mode(u8 musb_mode)
 135 {
 136         u32 devconf2 = omap_ctrl_readl(AM35XX_CONTROL_DEVCONF2);
 137
 138         devconf2 &= ~CONF2_OTGMODE;
 139         switch (musb_mode) {
 140         case MUSB_HOST:         /* Force VBUS valid, ID = 0 */
 141                 devconf2 |= CONF2_FORCE_HOST;
 142                 break;
 143         case MUSB_PERIPHERAL:   /* Force VBUS valid, ID = 1 */
 144                 devconf2 |= CONF2_FORCE_DEVICE;
 145                 break;
 146         case MUSB_OTG:          /* Don't override the VBUS/ID comparators */
 147                 devconf2 |= CONF2_NO_OVERRIDE;
 148                 break;
 149         default:
 150                 pr_info("Unsupported mode %u\n", musb_mode);
 151         }
 152
 153         omap_ctrl_writel(devconf2, AM35XX_CONTROL_DEVCONF2);
 154 }