arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts

   1 /*
   2  * dts file for Xilinx ZynqMP ep108 development board
   3  *
   4  * (C) Copyright 2014 - 2015, Xilinx, Inc.
   5  *
   6  * Michal Simek <michal.simek@xilinx.com>
   7  *
   8  * This program is free software; you can redistribute it and/or
   9  * modify it under the terms of the GNU General Public License as
  10  * published by the Free Software Foundation; either version 2 of
  11  * the License, or (at your option) any later version.
  12  */
  13
  14 /dts-v1/;
  15
  16 /include/ "zynqmp.dtsi"
  17
  18 / {
  19         model = "ZynqMP EP108";
  20
  21         aliases {
  22                 serial0 = &uart0;
  23         };
  24
  25         chosen {
  26                 stdout-path = "serial0:115200n8";
  27         };
  28
  29         memory {
  30                 device_type = "memory";
  31                 reg = <0x0 0x0 0x40000000>;
  32         };
  33 };
  34
  35 &can0 {
  36         status = "okay";
  37 };
  38
  39 &gem0 {
  40         status = "okay";
  41         phy-handle = <&phy0>;
  42         phy-mode = "rgmii-id";
  43         phy0: phy@0{
  44                 reg = <0>;
  45                 max-speed = <100>;
  46         };
  47 };
  48
  49 &gpio {
  50         status = "okay";
  51 };
  52
  53 &i2c0 {
  54         status = "okay";
  55         clock-frequency = <400000>;
  56         eeprom@54 {
  57                 compatible = "at,24c64";
  58                 reg = <0x54>;
  59         };
  60 };
  61
  62 &i2c1 {
  63         status = "okay";
  64         clock-frequency = <400000>;
  65         eeprom@55 {
  66                 compatible = "at,24c64";
  67                 reg = <0x55>;
  68         };
  69 };
  70
  71 &sata {
  72         status = "okay";
  73         ceva,broken-gen2;
  74 };
  75
  76 &sdhci0 {
  77         status = "okay";
  78 };
  79
  80 &sdhci1 {
  81         status = "okay";
  82 };
  83
  84 &spi0 {
  85         status = "okay";
  86         num-cs = <1>;
  87         spi0_flash0: spi0_flash0@0 {
  88                 compatible = "m25p80";
  89                 #address-cells = <1>;
  90                 #size-cells = <1>;
  91                 spi-max-frequency = <50000000>;
  92                 reg = <0>;
  93
  94                 spi0_flash0@00000000 {
  95                         label = "spi0_flash0";
  96                         reg = <0x0 0x100000>;
  97                 };
  98         };
  99 };
 100
 101 &spi1 {
 102         status = "okay";
 103         num-cs = <1>;
 104         spi1_flash0: spi1_flash0@0 {
 105                 compatible = "m25p80";
 106                 #address-cells = <1>;
 107                 #size-cells = <1>;
 108                 spi-max-frequency = <50000000>;
 109                 reg = <0>;
 110
 111                 spi1_flash0@00000000 {
 112                         label = "spi1_flash0";
 113                         reg = <0x0 0x100000>;
 114                 };
 115         };
 116 };
 117
 118 &uart0 {
 119         status = "okay";
 120 };
 121
 122 &usb0 {
 123         status = "okay";
 124         dr_mode = "peripheral";
 125         maximum-speed = "high-speed";
 126 };
 127
 128 &usb1 {
 129         status = "okay";
 130         dr_mode = "host";
 131         maximum-speed = "high-speed";
 132 };
 133
 134 &watchdog0 {
 135         status = "okay";
 136 };