1 /* mga_dma.c -- DMA support for mga g200/g400 -*- linux-c -*-
2 * Created: Mon Dec 13 01:50:01 1999 by jhartmann@precisioninsight.com
4 * Copyright 1999 Precision Insight, Inc., Cedar Park, Texas.
5 * Copyright 2000 VA Linux Systems, Inc., Sunnyvale, California.
8 * Permission is hereby granted, free of charge, to any person obtaining a
9 * copy of this software and associated documentation files (the "Software"),
10 * to deal in the Software without restriction, including without limitation
11 * the rights to use, copy, modify, merge, publish, distribute, sublicense,
12 * and/or sell copies of the Software, and to permit persons to whom the
13 * Software is furnished to do so, subject to the following conditions:
15 * The above copyright notice and this permission notice (including the next
16 * paragraph) shall be included in all copies or substantial portions of the
19 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
20 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
21 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
22 * PRECISION INSIGHT AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR
23 * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
24 * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
25 * DEALINGS IN THE SOFTWARE.
30 * DMA support for MGA G200 / G400.
32 * \author Rickard E. (Rik) Faith <faith@valinux.com>
33 * \author Jeff Hartmann <jhartmann@valinux.com>
34 * \author Keith Whitwell <keith@tungstengraphics.com>
35 * \author Gareth Hughes <gareth@valinux.com>
39 #include <drm/mga_drm.h>
42 #define MGA_DEFAULT_USEC_TIMEOUT 10000
43 #define MGA_FREELIST_DEBUG 0
45 #define MINIMAL_CLEANUP 0
46 #define FULL_CLEANUP 1
47 static int mga_do_cleanup_dma(struct drm_device
*dev
, int full_cleanup
);
49 /* ================================================================
53 int mga_do_wait_for_idle(drm_mga_private_t
*dev_priv
)
59 for (i
= 0; i
< dev_priv
->usec_timeout
; i
++) {
60 status
= MGA_READ(MGA_STATUS
) & MGA_ENGINE_IDLE_MASK
;
61 if (status
== MGA_ENDPRDMASTS
) {
62 MGA_WRITE8(MGA_CRTC_INDEX
, 0);
69 DRM_ERROR("failed!\n");
70 DRM_INFO(" status=0x%08x\n", status
);
75 static int mga_do_dma_reset(drm_mga_private_t
*dev_priv
)
77 drm_mga_sarea_t
*sarea_priv
= dev_priv
->sarea_priv
;
78 drm_mga_primary_buffer_t
*primary
= &dev_priv
->prim
;
82 /* The primary DMA stream should look like new right about now.
85 primary
->space
= primary
->size
;
86 primary
->last_flush
= 0;
88 sarea_priv
->last_wrap
= 0;
90 /* FIXME: Reset counters, buffer ages etc...
93 /* FIXME: What else do we need to reinitialize? WARP stuff?
99 /* ================================================================
103 void mga_do_dma_flush(drm_mga_private_t
*dev_priv
)
105 drm_mga_primary_buffer_t
*primary
= &dev_priv
->prim
;
112 /* We need to wait so that we can do an safe flush */
113 for (i
= 0; i
< dev_priv
->usec_timeout
; i
++) {
114 status
= MGA_READ(MGA_STATUS
) & MGA_ENGINE_IDLE_MASK
;
115 if (status
== MGA_ENDPRDMASTS
)
120 if (primary
->tail
== primary
->last_flush
) {
121 DRM_DEBUG(" bailing out...\n");
125 tail
= primary
->tail
+ dev_priv
->primary
->offset
;
127 /* We need to pad the stream between flushes, as the card
128 * actually (partially?) reads the first of these commands.
129 * See page 4-16 in the G400 manual, middle of the page or so.
133 DMA_BLOCK(MGA_DMAPAD
, 0x00000000,
134 MGA_DMAPAD
, 0x00000000,
135 MGA_DMAPAD
, 0x00000000, MGA_DMAPAD
, 0x00000000);
139 primary
->last_flush
= primary
->tail
;
141 head
= MGA_READ(MGA_PRIMADDRESS
);
144 primary
->space
= primary
->size
- primary
->tail
;
146 primary
->space
= head
- tail
;
148 DRM_DEBUG(" head = 0x%06lx\n", (unsigned long)(head
- dev_priv
->primary
->offset
));
149 DRM_DEBUG(" tail = 0x%06lx\n", (unsigned long)(tail
- dev_priv
->primary
->offset
));
150 DRM_DEBUG(" space = 0x%06x\n", primary
->space
);
152 mga_flush_write_combine();
153 MGA_WRITE(MGA_PRIMEND
, tail
| dev_priv
->dma_access
);
155 DRM_DEBUG("done.\n");
158 void mga_do_dma_wrap_start(drm_mga_private_t
*dev_priv
)
160 drm_mga_primary_buffer_t
*primary
= &dev_priv
->prim
;
167 DMA_BLOCK(MGA_DMAPAD
, 0x00000000,
168 MGA_DMAPAD
, 0x00000000,
169 MGA_DMAPAD
, 0x00000000, MGA_DMAPAD
, 0x00000000);
173 tail
= primary
->tail
+ dev_priv
->primary
->offset
;
176 primary
->last_flush
= 0;
177 primary
->last_wrap
++;
179 head
= MGA_READ(MGA_PRIMADDRESS
);
181 if (head
== dev_priv
->primary
->offset
)
182 primary
->space
= primary
->size
;
184 primary
->space
= head
- dev_priv
->primary
->offset
;
186 DRM_DEBUG(" head = 0x%06lx\n", (unsigned long)(head
- dev_priv
->primary
->offset
));
187 DRM_DEBUG(" tail = 0x%06x\n", primary
->tail
);
188 DRM_DEBUG(" wrap = %d\n", primary
->last_wrap
);
189 DRM_DEBUG(" space = 0x%06x\n", primary
->space
);
191 mga_flush_write_combine();
192 MGA_WRITE(MGA_PRIMEND
, tail
| dev_priv
->dma_access
);
194 set_bit(0, &primary
->wrapped
);
195 DRM_DEBUG("done.\n");
198 void mga_do_dma_wrap_end(drm_mga_private_t
*dev_priv
)
200 drm_mga_primary_buffer_t
*primary
= &dev_priv
->prim
;
201 drm_mga_sarea_t
*sarea_priv
= dev_priv
->sarea_priv
;
202 u32 head
= dev_priv
->primary
->offset
;
205 sarea_priv
->last_wrap
++;
206 DRM_DEBUG(" wrap = %d\n", sarea_priv
->last_wrap
);
208 mga_flush_write_combine();
209 MGA_WRITE(MGA_PRIMADDRESS
, head
| MGA_DMA_GENERAL
);
211 clear_bit(0, &primary
->wrapped
);
212 DRM_DEBUG("done.\n");
215 /* ================================================================
216 * Freelist management
219 #define MGA_BUFFER_USED (~0)
220 #define MGA_BUFFER_FREE 0
222 #if MGA_FREELIST_DEBUG
223 static void mga_freelist_print(struct drm_device
*dev
)
225 drm_mga_private_t
*dev_priv
= dev
->dev_private
;
226 drm_mga_freelist_t
*entry
;
229 DRM_INFO("current dispatch: last=0x%x done=0x%x\n",
230 dev_priv
->sarea_priv
->last_dispatch
,
231 (unsigned int)(MGA_READ(MGA_PRIMADDRESS
) -
232 dev_priv
->primary
->offset
));
233 DRM_INFO("current freelist:\n");
235 for (entry
= dev_priv
->head
->next
; entry
; entry
= entry
->next
) {
236 DRM_INFO(" %p idx=%2d age=0x%x 0x%06lx\n",
237 entry
, entry
->buf
->idx
, entry
->age
.head
,
238 (unsigned long)(entry
->age
.head
- dev_priv
->primary
->offset
));
244 static int mga_freelist_init(struct drm_device
*dev
, drm_mga_private_t
*dev_priv
)
246 struct drm_device_dma
*dma
= dev
->dma
;
248 drm_mga_buf_priv_t
*buf_priv
;
249 drm_mga_freelist_t
*entry
;
251 DRM_DEBUG("count=%d\n", dma
->buf_count
);
253 dev_priv
->head
= kzalloc(sizeof(drm_mga_freelist_t
), GFP_KERNEL
);
254 if (dev_priv
->head
== NULL
)
257 SET_AGE(&dev_priv
->head
->age
, MGA_BUFFER_USED
, 0);
259 for (i
= 0; i
< dma
->buf_count
; i
++) {
260 buf
= dma
->buflist
[i
];
261 buf_priv
= buf
->dev_private
;
263 entry
= kzalloc(sizeof(drm_mga_freelist_t
), GFP_KERNEL
);
267 entry
->next
= dev_priv
->head
->next
;
268 entry
->prev
= dev_priv
->head
;
269 SET_AGE(&entry
->age
, MGA_BUFFER_FREE
, 0);
272 if (dev_priv
->head
->next
!= NULL
)
273 dev_priv
->head
->next
->prev
= entry
;
274 if (entry
->next
== NULL
)
275 dev_priv
->tail
= entry
;
277 buf_priv
->list_entry
= entry
;
278 buf_priv
->discard
= 0;
279 buf_priv
->dispatched
= 0;
281 dev_priv
->head
->next
= entry
;
287 static void mga_freelist_cleanup(struct drm_device
*dev
)
289 drm_mga_private_t
*dev_priv
= dev
->dev_private
;
290 drm_mga_freelist_t
*entry
;
291 drm_mga_freelist_t
*next
;
294 entry
= dev_priv
->head
;
301 dev_priv
->head
= dev_priv
->tail
= NULL
;
305 /* FIXME: Still needed?
307 static void mga_freelist_reset(struct drm_device
*dev
)
309 struct drm_device_dma
*dma
= dev
->dma
;
311 drm_mga_buf_priv_t
*buf_priv
;
314 for (i
= 0; i
< dma
->buf_count
; i
++) {
315 buf
= dma
->buflist
[i
];
316 buf_priv
= buf
->dev_private
;
317 SET_AGE(&buf_priv
->list_entry
->age
, MGA_BUFFER_FREE
, 0);
322 static struct drm_buf
*mga_freelist_get(struct drm_device
* dev
)
324 drm_mga_private_t
*dev_priv
= dev
->dev_private
;
325 drm_mga_freelist_t
*next
;
326 drm_mga_freelist_t
*prev
;
327 drm_mga_freelist_t
*tail
= dev_priv
->tail
;
331 head
= MGA_READ(MGA_PRIMADDRESS
);
332 wrap
= dev_priv
->sarea_priv
->last_wrap
;
334 DRM_DEBUG(" tail=0x%06lx %d\n",
336 (unsigned long)(tail
->age
.head
- dev_priv
->primary
->offset
) : 0,
338 DRM_DEBUG(" head=0x%06lx %d\n",
339 (unsigned long)(head
- dev_priv
->primary
->offset
), wrap
);
341 if (TEST_AGE(&tail
->age
, head
, wrap
)) {
342 prev
= dev_priv
->tail
->prev
;
343 next
= dev_priv
->tail
;
345 next
->prev
= next
->next
= NULL
;
346 dev_priv
->tail
= prev
;
347 SET_AGE(&next
->age
, MGA_BUFFER_USED
, 0);
351 DRM_DEBUG("returning NULL!\n");
355 int mga_freelist_put(struct drm_device
*dev
, struct drm_buf
*buf
)
357 drm_mga_private_t
*dev_priv
= dev
->dev_private
;
358 drm_mga_buf_priv_t
*buf_priv
= buf
->dev_private
;
359 drm_mga_freelist_t
*head
, *entry
, *prev
;
361 DRM_DEBUG("age=0x%06lx wrap=%d\n",
362 (unsigned long)(buf_priv
->list_entry
->age
.head
-
363 dev_priv
->primary
->offset
),
364 buf_priv
->list_entry
->age
.wrap
);
366 entry
= buf_priv
->list_entry
;
367 head
= dev_priv
->head
;
369 if (buf_priv
->list_entry
->age
.head
== MGA_BUFFER_USED
) {
370 SET_AGE(&entry
->age
, MGA_BUFFER_FREE
, 0);
371 prev
= dev_priv
->tail
;
386 /* ================================================================
387 * DMA initialization, cleanup
390 int mga_driver_load(struct drm_device
*dev
, unsigned long flags
)
392 drm_mga_private_t
*dev_priv
;
395 dev_priv
= kzalloc(sizeof(drm_mga_private_t
), GFP_KERNEL
);
399 dev
->dev_private
= (void *)dev_priv
;
401 dev_priv
->usec_timeout
= MGA_DEFAULT_USEC_TIMEOUT
;
402 dev_priv
->chipset
= flags
;
404 pci_set_master(dev
->pdev
);
406 dev_priv
->mmio_base
= pci_resource_start(dev
->pdev
, 1);
407 dev_priv
->mmio_size
= pci_resource_len(dev
->pdev
, 1);
409 ret
= drm_vblank_init(dev
, 1);
412 (void) mga_driver_unload(dev
);
419 #if IS_ENABLED(CONFIG_AGP)
421 * Bootstrap the driver for AGP DMA.
424 * Investigate whether there is any benefit to storing the WARP microcode in
425 * AGP memory. If not, the microcode may as well always be put in PCI
429 * This routine needs to set dma_bs->agp_mode to the mode actually configured
430 * in the hardware. Looking just at the Linux AGP driver code, I don't see
431 * an easy way to determine this.
433 * \sa mga_do_dma_bootstrap, mga_do_pci_dma_bootstrap
435 static int mga_do_agp_dma_bootstrap(struct drm_device
*dev
,
436 drm_mga_dma_bootstrap_t
*dma_bs
)
438 drm_mga_private_t
*const dev_priv
=
439 (drm_mga_private_t
*) dev
->dev_private
;
440 unsigned int warp_size
= MGA_WARP_UCODE_SIZE
;
443 const unsigned secondary_size
= dma_bs
->secondary_bin_count
444 * dma_bs
->secondary_bin_size
;
445 const unsigned agp_size
= (dma_bs
->agp_size
<< 20);
446 struct drm_buf_desc req
;
447 struct drm_agp_mode mode
;
448 struct drm_agp_info info
;
449 struct drm_agp_buffer agp_req
;
450 struct drm_agp_binding bind_req
;
453 err
= drm_agp_acquire(dev
);
455 DRM_ERROR("Unable to acquire AGP: %d\n", err
);
459 err
= drm_agp_info(dev
, &info
);
461 DRM_ERROR("Unable to get AGP info: %d\n", err
);
465 mode
.mode
= (info
.mode
& ~0x07) | dma_bs
->agp_mode
;
466 err
= drm_agp_enable(dev
, mode
);
468 DRM_ERROR("Unable to enable AGP (mode = 0x%lx)\n", mode
.mode
);
472 /* In addition to the usual AGP mode configuration, the G200 AGP cards
473 * need to have the AGP mode "manually" set.
476 if (dev_priv
->chipset
== MGA_CARD_TYPE_G200
) {
477 if (mode
.mode
& 0x02)
478 MGA_WRITE(MGA_AGP_PLL
, MGA_AGP2XPLL_ENABLE
);
480 MGA_WRITE(MGA_AGP_PLL
, MGA_AGP2XPLL_DISABLE
);
483 /* Allocate and bind AGP memory. */
484 agp_req
.size
= agp_size
;
486 err
= drm_agp_alloc(dev
, &agp_req
);
488 dev_priv
->agp_size
= 0;
489 DRM_ERROR("Unable to allocate %uMB AGP memory\n",
494 dev_priv
->agp_size
= agp_size
;
495 dev_priv
->agp_handle
= agp_req
.handle
;
497 bind_req
.handle
= agp_req
.handle
;
499 err
= drm_agp_bind(dev
, &bind_req
);
501 DRM_ERROR("Unable to bind AGP memory: %d\n", err
);
505 /* Make drm_legacy_addbufs happy by not trying to create a mapping for
508 if (warp_size
< PAGE_SIZE
)
509 warp_size
= PAGE_SIZE
;
512 err
= drm_legacy_addmap(dev
, offset
, warp_size
,
513 _DRM_AGP
, _DRM_READ_ONLY
, &dev_priv
->warp
);
515 DRM_ERROR("Unable to map WARP microcode: %d\n", err
);
520 err
= drm_legacy_addmap(dev
, offset
, dma_bs
->primary_size
,
521 _DRM_AGP
, _DRM_READ_ONLY
, &dev_priv
->primary
);
523 DRM_ERROR("Unable to map primary DMA region: %d\n", err
);
527 offset
+= dma_bs
->primary_size
;
528 err
= drm_legacy_addmap(dev
, offset
, secondary_size
,
529 _DRM_AGP
, 0, &dev
->agp_buffer_map
);
531 DRM_ERROR("Unable to map secondary DMA region: %d\n", err
);
535 (void)memset(&req
, 0, sizeof(req
));
536 req
.count
= dma_bs
->secondary_bin_count
;
537 req
.size
= dma_bs
->secondary_bin_size
;
538 req
.flags
= _DRM_AGP_BUFFER
;
539 req
.agp_start
= offset
;
541 err
= drm_legacy_addbufs_agp(dev
, &req
);
543 DRM_ERROR("Unable to add secondary DMA buffers: %d\n", err
);
548 struct drm_map_list
*_entry
;
549 unsigned long agp_token
= 0;
551 list_for_each_entry(_entry
, &dev
->maplist
, head
) {
552 if (_entry
->map
== dev
->agp_buffer_map
)
553 agp_token
= _entry
->user_token
;
558 dev
->agp_buffer_token
= agp_token
;
561 offset
+= secondary_size
;
562 err
= drm_legacy_addmap(dev
, offset
, agp_size
- offset
,
563 _DRM_AGP
, 0, &dev_priv
->agp_textures
);
565 DRM_ERROR("Unable to map AGP texture region %d\n", err
);
569 drm_legacy_ioremap(dev_priv
->warp
, dev
);
570 drm_legacy_ioremap(dev_priv
->primary
, dev
);
571 drm_legacy_ioremap(dev
->agp_buffer_map
, dev
);
573 if (!dev_priv
->warp
->handle
||
574 !dev_priv
->primary
->handle
|| !dev
->agp_buffer_map
->handle
) {
575 DRM_ERROR("failed to ioremap agp regions! (%p, %p, %p)\n",
576 dev_priv
->warp
->handle
, dev_priv
->primary
->handle
,
577 dev
->agp_buffer_map
->handle
);
581 dev_priv
->dma_access
= MGA_PAGPXFER
;
582 dev_priv
->wagp_enable
= MGA_WAGP_ENABLE
;
584 DRM_INFO("Initialized card for AGP DMA.\n");
588 static int mga_do_agp_dma_bootstrap(struct drm_device
*dev
,
589 drm_mga_dma_bootstrap_t
*dma_bs
)
596 * Bootstrap the driver for PCI DMA.
599 * The algorithm for decreasing the size of the primary DMA buffer could be
600 * better. The size should be rounded up to the nearest page size, then
601 * decrease the request size by a single page each pass through the loop.
604 * Determine whether the maximum address passed to drm_pci_alloc is correct.
605 * The same goes for drm_legacy_addbufs_pci.
607 * \sa mga_do_dma_bootstrap, mga_do_agp_dma_bootstrap
609 static int mga_do_pci_dma_bootstrap(struct drm_device
*dev
,
610 drm_mga_dma_bootstrap_t
*dma_bs
)
612 drm_mga_private_t
*const dev_priv
=
613 (drm_mga_private_t
*) dev
->dev_private
;
614 unsigned int warp_size
= MGA_WARP_UCODE_SIZE
;
615 unsigned int primary_size
;
616 unsigned int bin_count
;
618 struct drm_buf_desc req
;
620 if (dev
->dma
== NULL
) {
621 DRM_ERROR("dev->dma is NULL\n");
625 /* Make drm_legacy_addbufs happy by not trying to create a mapping for
628 if (warp_size
< PAGE_SIZE
)
629 warp_size
= PAGE_SIZE
;
631 /* The proper alignment is 0x100 for this mapping */
632 err
= drm_legacy_addmap(dev
, 0, warp_size
, _DRM_CONSISTENT
,
633 _DRM_READ_ONLY
, &dev_priv
->warp
);
635 DRM_ERROR("Unable to create mapping for WARP microcode: %d\n",
640 /* Other than the bottom two bits being used to encode other
641 * information, there don't appear to be any restrictions on the
642 * alignment of the primary or secondary DMA buffers.
645 for (primary_size
= dma_bs
->primary_size
; primary_size
!= 0;
646 primary_size
>>= 1) {
647 /* The proper alignment for this mapping is 0x04 */
648 err
= drm_legacy_addmap(dev
, 0, primary_size
, _DRM_CONSISTENT
,
649 _DRM_READ_ONLY
, &dev_priv
->primary
);
655 DRM_ERROR("Unable to allocate primary DMA region: %d\n", err
);
659 if (dev_priv
->primary
->size
!= dma_bs
->primary_size
) {
660 DRM_INFO("Primary DMA buffer size reduced from %u to %u.\n",
661 dma_bs
->primary_size
,
662 (unsigned)dev_priv
->primary
->size
);
663 dma_bs
->primary_size
= dev_priv
->primary
->size
;
666 for (bin_count
= dma_bs
->secondary_bin_count
; bin_count
> 0;
668 (void)memset(&req
, 0, sizeof(req
));
669 req
.count
= bin_count
;
670 req
.size
= dma_bs
->secondary_bin_size
;
672 err
= drm_legacy_addbufs_pci(dev
, &req
);
677 if (bin_count
== 0) {
678 DRM_ERROR("Unable to add secondary DMA buffers: %d\n", err
);
682 if (bin_count
!= dma_bs
->secondary_bin_count
) {
683 DRM_INFO("Secondary PCI DMA buffer bin count reduced from %u "
684 "to %u.\n", dma_bs
->secondary_bin_count
, bin_count
);
686 dma_bs
->secondary_bin_count
= bin_count
;
689 dev_priv
->dma_access
= 0;
690 dev_priv
->wagp_enable
= 0;
692 dma_bs
->agp_mode
= 0;
694 DRM_INFO("Initialized card for PCI DMA.\n");
698 static int mga_do_dma_bootstrap(struct drm_device
*dev
,
699 drm_mga_dma_bootstrap_t
*dma_bs
)
701 const int is_agp
= (dma_bs
->agp_mode
!= 0) && drm_pci_device_is_agp(dev
);
703 drm_mga_private_t
*const dev_priv
=
704 (drm_mga_private_t
*) dev
->dev_private
;
706 dev_priv
->used_new_dma_init
= 1;
708 /* The first steps are the same for both PCI and AGP based DMA. Map
709 * the cards MMIO registers and map a status page.
711 err
= drm_legacy_addmap(dev
, dev_priv
->mmio_base
, dev_priv
->mmio_size
,
712 _DRM_REGISTERS
, _DRM_READ_ONLY
,
715 DRM_ERROR("Unable to map MMIO region: %d\n", err
);
719 err
= drm_legacy_addmap(dev
, 0, SAREA_MAX
, _DRM_SHM
,
720 _DRM_READ_ONLY
| _DRM_LOCKED
| _DRM_KERNEL
,
723 DRM_ERROR("Unable to map status region: %d\n", err
);
727 /* The DMA initialization procedure is slightly different for PCI and
728 * AGP cards. AGP cards just allocate a large block of AGP memory and
729 * carve off portions of it for internal uses. The remaining memory
730 * is returned to user-mode to be used for AGP textures.
733 err
= mga_do_agp_dma_bootstrap(dev
, dma_bs
);
735 /* If we attempted to initialize the card for AGP DMA but failed,
736 * clean-up any mess that may have been created.
740 mga_do_cleanup_dma(dev
, MINIMAL_CLEANUP
);
742 /* Not only do we want to try and initialized PCI cards for PCI DMA,
743 * but we also try to initialized AGP cards that could not be
744 * initialized for AGP DMA. This covers the case where we have an AGP
745 * card in a system with an unsupported AGP chipset. In that case the
746 * card will be detected as AGP, but we won't be able to allocate any
751 err
= mga_do_pci_dma_bootstrap(dev
, dma_bs
);
756 int mga_dma_bootstrap(struct drm_device
*dev
, void *data
,
757 struct drm_file
*file_priv
)
759 drm_mga_dma_bootstrap_t
*bootstrap
= data
;
761 static const int modes
[] = { 0, 1, 2, 2, 4, 4, 4, 4 };
762 const drm_mga_private_t
*const dev_priv
=
763 (drm_mga_private_t
*) dev
->dev_private
;
765 err
= mga_do_dma_bootstrap(dev
, bootstrap
);
767 mga_do_cleanup_dma(dev
, FULL_CLEANUP
);
771 if (dev_priv
->agp_textures
!= NULL
) {
772 bootstrap
->texture_handle
= dev_priv
->agp_textures
->offset
;
773 bootstrap
->texture_size
= dev_priv
->agp_textures
->size
;
775 bootstrap
->texture_handle
= 0;
776 bootstrap
->texture_size
= 0;
779 bootstrap
->agp_mode
= modes
[bootstrap
->agp_mode
& 0x07];
784 static int mga_do_init_dma(struct drm_device
*dev
, drm_mga_init_t
*init
)
786 drm_mga_private_t
*dev_priv
;
790 dev_priv
= dev
->dev_private
;
793 dev_priv
->clear_cmd
= MGA_DWGCTL_CLEAR
| MGA_ATYPE_BLK
;
795 dev_priv
->clear_cmd
= MGA_DWGCTL_CLEAR
| MGA_ATYPE_RSTR
;
796 dev_priv
->maccess
= init
->maccess
;
798 dev_priv
->fb_cpp
= init
->fb_cpp
;
799 dev_priv
->front_offset
= init
->front_offset
;
800 dev_priv
->front_pitch
= init
->front_pitch
;
801 dev_priv
->back_offset
= init
->back_offset
;
802 dev_priv
->back_pitch
= init
->back_pitch
;
804 dev_priv
->depth_cpp
= init
->depth_cpp
;
805 dev_priv
->depth_offset
= init
->depth_offset
;
806 dev_priv
->depth_pitch
= init
->depth_pitch
;
808 /* FIXME: Need to support AGP textures...
810 dev_priv
->texture_offset
= init
->texture_offset
[0];
811 dev_priv
->texture_size
= init
->texture_size
[0];
813 dev_priv
->sarea
= drm_legacy_getsarea(dev
);
814 if (!dev_priv
->sarea
) {
815 DRM_ERROR("failed to find sarea!\n");
819 if (!dev_priv
->used_new_dma_init
) {
821 dev_priv
->dma_access
= MGA_PAGPXFER
;
822 dev_priv
->wagp_enable
= MGA_WAGP_ENABLE
;
824 dev_priv
->status
= drm_legacy_findmap(dev
, init
->status_offset
);
825 if (!dev_priv
->status
) {
826 DRM_ERROR("failed to find status page!\n");
829 dev_priv
->mmio
= drm_legacy_findmap(dev
, init
->mmio_offset
);
830 if (!dev_priv
->mmio
) {
831 DRM_ERROR("failed to find mmio region!\n");
834 dev_priv
->warp
= drm_legacy_findmap(dev
, init
->warp_offset
);
835 if (!dev_priv
->warp
) {
836 DRM_ERROR("failed to find warp microcode region!\n");
839 dev_priv
->primary
= drm_legacy_findmap(dev
, init
->primary_offset
);
840 if (!dev_priv
->primary
) {
841 DRM_ERROR("failed to find primary dma region!\n");
844 dev
->agp_buffer_token
= init
->buffers_offset
;
845 dev
->agp_buffer_map
=
846 drm_legacy_findmap(dev
, init
->buffers_offset
);
847 if (!dev
->agp_buffer_map
) {
848 DRM_ERROR("failed to find dma buffer region!\n");
852 drm_legacy_ioremap(dev_priv
->warp
, dev
);
853 drm_legacy_ioremap(dev_priv
->primary
, dev
);
854 drm_legacy_ioremap(dev
->agp_buffer_map
, dev
);
857 dev_priv
->sarea_priv
=
858 (drm_mga_sarea_t
*) ((u8
*) dev_priv
->sarea
->handle
+
859 init
->sarea_priv_offset
);
861 if (!dev_priv
->warp
->handle
||
862 !dev_priv
->primary
->handle
||
863 ((dev_priv
->dma_access
!= 0) &&
864 ((dev
->agp_buffer_map
== NULL
) ||
865 (dev
->agp_buffer_map
->handle
== NULL
)))) {
866 DRM_ERROR("failed to ioremap agp regions!\n");
870 ret
= mga_warp_install_microcode(dev_priv
);
872 DRM_ERROR("failed to install WARP ucode!: %d\n", ret
);
876 ret
= mga_warp_init(dev_priv
);
878 DRM_ERROR("failed to init WARP engine!: %d\n", ret
);
882 dev_priv
->prim
.status
= (u32
*) dev_priv
->status
->handle
;
884 mga_do_wait_for_idle(dev_priv
);
886 /* Init the primary DMA registers.
888 MGA_WRITE(MGA_PRIMADDRESS
, dev_priv
->primary
->offset
| MGA_DMA_GENERAL
);
890 MGA_WRITE(MGA_PRIMPTR
, virt_to_bus((void *)dev_priv
->prim
.status
) | MGA_PRIMPTREN0
| /* Soft trap, SECEND, SETUPEND */
891 MGA_PRIMPTREN1
); /* DWGSYNC */
894 dev_priv
->prim
.start
= (u8
*) dev_priv
->primary
->handle
;
895 dev_priv
->prim
.end
= ((u8
*) dev_priv
->primary
->handle
896 + dev_priv
->primary
->size
);
897 dev_priv
->prim
.size
= dev_priv
->primary
->size
;
899 dev_priv
->prim
.tail
= 0;
900 dev_priv
->prim
.space
= dev_priv
->prim
.size
;
901 dev_priv
->prim
.wrapped
= 0;
903 dev_priv
->prim
.last_flush
= 0;
904 dev_priv
->prim
.last_wrap
= 0;
906 dev_priv
->prim
.high_mark
= 256 * DMA_BLOCK_SIZE
;
908 dev_priv
->prim
.status
[0] = dev_priv
->primary
->offset
;
909 dev_priv
->prim
.status
[1] = 0;
911 dev_priv
->sarea_priv
->last_wrap
= 0;
912 dev_priv
->sarea_priv
->last_frame
.head
= 0;
913 dev_priv
->sarea_priv
->last_frame
.wrap
= 0;
915 if (mga_freelist_init(dev
, dev_priv
) < 0) {
916 DRM_ERROR("could not initialize freelist\n");
923 static int mga_do_cleanup_dma(struct drm_device
*dev
, int full_cleanup
)
928 /* Make sure interrupts are disabled here because the uninstall ioctl
929 * may not have been called from userspace and after dev_private
930 * is freed, it's too late.
932 if (dev
->irq_enabled
)
933 drm_irq_uninstall(dev
);
935 if (dev
->dev_private
) {
936 drm_mga_private_t
*dev_priv
= dev
->dev_private
;
938 if ((dev_priv
->warp
!= NULL
)
939 && (dev_priv
->warp
->type
!= _DRM_CONSISTENT
))
940 drm_legacy_ioremapfree(dev_priv
->warp
, dev
);
942 if ((dev_priv
->primary
!= NULL
)
943 && (dev_priv
->primary
->type
!= _DRM_CONSISTENT
))
944 drm_legacy_ioremapfree(dev_priv
->primary
, dev
);
946 if (dev
->agp_buffer_map
!= NULL
)
947 drm_legacy_ioremapfree(dev
->agp_buffer_map
, dev
);
949 if (dev_priv
->used_new_dma_init
) {
950 #if IS_ENABLED(CONFIG_AGP)
951 if (dev_priv
->agp_handle
!= 0) {
952 struct drm_agp_binding unbind_req
;
953 struct drm_agp_buffer free_req
;
955 unbind_req
.handle
= dev_priv
->agp_handle
;
956 drm_agp_unbind(dev
, &unbind_req
);
958 free_req
.handle
= dev_priv
->agp_handle
;
959 drm_agp_free(dev
, &free_req
);
961 dev_priv
->agp_textures
= NULL
;
962 dev_priv
->agp_size
= 0;
963 dev_priv
->agp_handle
= 0;
966 if ((dev
->agp
!= NULL
) && dev
->agp
->acquired
)
967 err
= drm_agp_release(dev
);
971 dev_priv
->warp
= NULL
;
972 dev_priv
->primary
= NULL
;
973 dev_priv
->sarea
= NULL
;
974 dev_priv
->sarea_priv
= NULL
;
975 dev
->agp_buffer_map
= NULL
;
978 dev_priv
->mmio
= NULL
;
979 dev_priv
->status
= NULL
;
980 dev_priv
->used_new_dma_init
= 0;
983 memset(&dev_priv
->prim
, 0, sizeof(dev_priv
->prim
));
984 dev_priv
->warp_pipe
= 0;
985 memset(dev_priv
->warp_pipe_phys
, 0,
986 sizeof(dev_priv
->warp_pipe_phys
));
988 if (dev_priv
->head
!= NULL
)
989 mga_freelist_cleanup(dev
);
995 int mga_dma_init(struct drm_device
*dev
, void *data
,
996 struct drm_file
*file_priv
)
998 drm_mga_init_t
*init
= data
;
1001 LOCK_TEST_WITH_RETURN(dev
, file_priv
);
1003 switch (init
->func
) {
1005 err
= mga_do_init_dma(dev
, init
);
1007 (void)mga_do_cleanup_dma(dev
, FULL_CLEANUP
);
1009 case MGA_CLEANUP_DMA
:
1010 return mga_do_cleanup_dma(dev
, FULL_CLEANUP
);
1016 /* ================================================================
1017 * Primary DMA stream management
1020 int mga_dma_flush(struct drm_device
*dev
, void *data
,
1021 struct drm_file
*file_priv
)
1023 drm_mga_private_t
*dev_priv
= (drm_mga_private_t
*) dev
->dev_private
;
1024 struct drm_lock
*lock
= data
;
1026 LOCK_TEST_WITH_RETURN(dev
, file_priv
);
1028 DRM_DEBUG("%s%s%s\n",
1029 (lock
->flags
& _DRM_LOCK_FLUSH
) ? "flush, " : "",
1030 (lock
->flags
& _DRM_LOCK_FLUSH_ALL
) ? "flush all, " : "",
1031 (lock
->flags
& _DRM_LOCK_QUIESCENT
) ? "idle, " : "");
1033 WRAP_WAIT_WITH_RETURN(dev_priv
);
1035 if (lock
->flags
& (_DRM_LOCK_FLUSH
| _DRM_LOCK_FLUSH_ALL
))
1036 mga_do_dma_flush(dev_priv
);
1038 if (lock
->flags
& _DRM_LOCK_QUIESCENT
) {
1040 int ret
= mga_do_wait_for_idle(dev_priv
);
1042 DRM_INFO("-EBUSY\n");
1045 return mga_do_wait_for_idle(dev_priv
);
1052 int mga_dma_reset(struct drm_device
*dev
, void *data
,
1053 struct drm_file
*file_priv
)
1055 drm_mga_private_t
*dev_priv
= (drm_mga_private_t
*) dev
->dev_private
;
1057 LOCK_TEST_WITH_RETURN(dev
, file_priv
);
1059 return mga_do_dma_reset(dev_priv
);
1062 /* ================================================================
1063 * DMA buffer management
1066 static int mga_dma_get_buffers(struct drm_device
*dev
,
1067 struct drm_file
*file_priv
, struct drm_dma
*d
)
1069 struct drm_buf
*buf
;
1072 for (i
= d
->granted_count
; i
< d
->request_count
; i
++) {
1073 buf
= mga_freelist_get(dev
);
1077 buf
->file_priv
= file_priv
;
1079 if (copy_to_user(&d
->request_indices
[i
],
1080 &buf
->idx
, sizeof(buf
->idx
)))
1082 if (copy_to_user(&d
->request_sizes
[i
],
1083 &buf
->total
, sizeof(buf
->total
)))
1091 int mga_dma_buffers(struct drm_device
*dev
, void *data
,
1092 struct drm_file
*file_priv
)
1094 struct drm_device_dma
*dma
= dev
->dma
;
1095 drm_mga_private_t
*dev_priv
= (drm_mga_private_t
*) dev
->dev_private
;
1096 struct drm_dma
*d
= data
;
1099 LOCK_TEST_WITH_RETURN(dev
, file_priv
);
1101 /* Please don't send us buffers.
1103 if (d
->send_count
!= 0) {
1104 DRM_ERROR("Process %d trying to send %d buffers via drmDMA\n",
1105 DRM_CURRENTPID
, d
->send_count
);
1109 /* We'll send you buffers.
1111 if (d
->request_count
< 0 || d
->request_count
> dma
->buf_count
) {
1112 DRM_ERROR("Process %d trying to get %d buffers (of %d max)\n",
1113 DRM_CURRENTPID
, d
->request_count
, dma
->buf_count
);
1117 WRAP_TEST_WITH_RETURN(dev_priv
);
1119 d
->granted_count
= 0;
1121 if (d
->request_count
)
1122 ret
= mga_dma_get_buffers(dev
, file_priv
, d
);
1128 * Called just before the module is unloaded.
1130 int mga_driver_unload(struct drm_device
*dev
)
1132 kfree(dev
->dev_private
);
1133 dev
->dev_private
= NULL
;
1139 * Called when the last opener of the device is closed.
1141 void mga_driver_lastclose(struct drm_device
*dev
)
1143 mga_do_cleanup_dma(dev
, FULL_CLEANUP
);
1146 int mga_driver_dma_quiescent(struct drm_device
*dev
)
1148 drm_mga_private_t
*dev_priv
= dev
->dev_private
;
1149 return mga_do_wait_for_idle(dev_priv
);