iwlwifi: use rmb/wmb to protect indirect mmio operation
[linux/fpc-iii.git] / drivers / net / atlx / atl2.h
blobd918bbe621eae3d9e44dc1ad141fad8019a6f7fe
1 /* atl2.h -- atl2 driver definitions
3 * Copyright(c) 2007 Atheros Corporation. All rights reserved.
4 * Copyright(c) 2006 xiong huang <xiong.huang@atheros.com>
5 * Copyright(c) 2007 Chris Snook <csnook@redhat.com>
7 * Derived from Intel e1000 driver
8 * Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved.
10 * This program is free software; you can redistribute it and/or modify it
11 * under the terms of the GNU General Public License as published by the Free
12 * Software Foundation; either version 2 of the License, or (at your option)
13 * any later version.
15 * This program is distributed in the hope that it will be useful, but WITHOUT
16 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
17 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
18 * more details.
20 * You should have received a copy of the GNU General Public License along with
21 * this program; if not, write to the Free Software Foundation, Inc., 59
22 * Temple Place - Suite 330, Boston, MA 02111-1307, USA.
25 #ifndef _ATL2_H_
26 #define _ATL2_H_
28 #include <asm/atomic.h>
29 #include <linux/netdevice.h>
31 #ifndef _ATL2_HW_H_
32 #define _ATL2_HW_H_
34 #ifndef _ATL2_OSDEP_H_
35 #define _ATL2_OSDEP_H_
37 #include <linux/pci.h>
38 #include <linux/delay.h>
39 #include <linux/interrupt.h>
40 #include <linux/if_ether.h>
42 #include "atlx.h"
44 #ifdef ETHTOOL_OPS_COMPAT
45 extern int ethtool_ioctl(struct ifreq *ifr);
46 #endif
48 #define PCI_COMMAND_REGISTER PCI_COMMAND
49 #define CMD_MEM_WRT_INVALIDATE PCI_COMMAND_INVALIDATE
50 #define ETH_ADDR_LEN ETH_ALEN
52 #define ATL2_WRITE_REG(a, reg, value) (iowrite32((value), \
53 ((a)->hw_addr + (reg))))
55 #define ATL2_WRITE_FLUSH(a) (ioread32((a)->hw_addr))
57 #define ATL2_READ_REG(a, reg) (ioread32((a)->hw_addr + (reg)))
59 #define ATL2_WRITE_REGB(a, reg, value) (iowrite8((value), \
60 ((a)->hw_addr + (reg))))
62 #define ATL2_READ_REGB(a, reg) (ioread8((a)->hw_addr + (reg)))
64 #define ATL2_WRITE_REGW(a, reg, value) (iowrite16((value), \
65 ((a)->hw_addr + (reg))))
67 #define ATL2_READ_REGW(a, reg) (ioread16((a)->hw_addr + (reg)))
69 #define ATL2_WRITE_REG_ARRAY(a, reg, offset, value) \
70 (iowrite32((value), (((a)->hw_addr + (reg)) + ((offset) << 2))))
72 #define ATL2_READ_REG_ARRAY(a, reg, offset) \
73 (ioread32(((a)->hw_addr + (reg)) + ((offset) << 2)))
75 #endif /* _ATL2_OSDEP_H_ */
77 struct atl2_adapter;
78 struct atl2_hw;
80 /* function prototype */
81 static s32 atl2_reset_hw(struct atl2_hw *hw);
82 static s32 atl2_read_mac_addr(struct atl2_hw *hw);
83 static s32 atl2_init_hw(struct atl2_hw *hw);
84 static s32 atl2_get_speed_and_duplex(struct atl2_hw *hw, u16 *speed,
85 u16 *duplex);
86 static u32 atl2_hash_mc_addr(struct atl2_hw *hw, u8 *mc_addr);
87 static void atl2_hash_set(struct atl2_hw *hw, u32 hash_value);
88 static s32 atl2_read_phy_reg(struct atl2_hw *hw, u16 reg_addr, u16 *phy_data);
89 static s32 atl2_write_phy_reg(struct atl2_hw *hw, u32 reg_addr, u16 phy_data);
90 static void atl2_read_pci_cfg(struct atl2_hw *hw, u32 reg, u16 *value);
91 static void atl2_write_pci_cfg(struct atl2_hw *hw, u32 reg, u16 *value);
92 static void atl2_set_mac_addr(struct atl2_hw *hw);
93 static bool atl2_read_eeprom(struct atl2_hw *hw, u32 Offset, u32 *pValue);
94 static bool atl2_write_eeprom(struct atl2_hw *hw, u32 offset, u32 value);
95 static s32 atl2_phy_init(struct atl2_hw *hw);
96 static int atl2_check_eeprom_exist(struct atl2_hw *hw);
97 static void atl2_force_ps(struct atl2_hw *hw);
99 /* register definition */
101 /* Block IDLE Status Register */
102 #define IDLE_STATUS_RXMAC 1 /* 1: RXMAC is non-IDLE */
103 #define IDLE_STATUS_TXMAC 2 /* 1: TXMAC is non-IDLE */
104 #define IDLE_STATUS_DMAR 8 /* 1: DMAR is non-IDLE */
105 #define IDLE_STATUS_DMAW 4 /* 1: DMAW is non-IDLE */
107 /* MDIO Control Register */
108 #define MDIO_WAIT_TIMES 10
110 /* MAC Control Register */
111 #define MAC_CTRL_DBG_TX_BKPRESURE 0x100000 /* 1: TX max backoff */
112 #define MAC_CTRL_MACLP_CLK_PHY 0x8000000 /* 1: 25MHz from phy */
113 #define MAC_CTRL_HALF_LEFT_BUF_SHIFT 28
114 #define MAC_CTRL_HALF_LEFT_BUF_MASK 0xF /* MAC retry buf x32B */
116 /* Internal SRAM Partition Register */
117 #define REG_SRAM_TXRAM_END 0x1500 /* Internal tail address of TXRAM
118 * default: 2byte*1024 */
119 #define REG_SRAM_RXRAM_END 0x1502 /* Internal tail address of RXRAM
120 * default: 2byte*1024 */
122 /* Descriptor Control register */
123 #define REG_TXD_BASE_ADDR_LO 0x1544 /* The base address of the Transmit
124 * Data Mem low 32-bit(dword align) */
125 #define REG_TXD_MEM_SIZE 0x1548 /* Transmit Data Memory size(by
126 * double word , max 256KB) */
127 #define REG_TXS_BASE_ADDR_LO 0x154C /* The base address of the Transmit
128 * Status Memory low 32-bit(dword word
129 * align) */
130 #define REG_TXS_MEM_SIZE 0x1550 /* double word unit, max 4*2047
131 * bytes. */
132 #define REG_RXD_BASE_ADDR_LO 0x1554 /* The base address of the Transmit
133 * Status Memory low 32-bit(unit 8
134 * bytes) */
135 #define REG_RXD_BUF_NUM 0x1558 /* Receive Data & Status Memory buffer
136 * number (unit 1536bytes, max
137 * 1536*2047) */
139 /* DMAR Control Register */
140 #define REG_DMAR 0x1580
141 #define DMAR_EN 0x1 /* 1: Enable DMAR */
143 /* TX Cur-Through (early tx threshold) Control Register */
144 #define REG_TX_CUT_THRESH 0x1590 /* TxMac begin transmit packet
145 * threshold(unit word) */
147 /* DMAW Control Register */
148 #define REG_DMAW 0x15A0
149 #define DMAW_EN 0x1
151 /* Flow control register */
152 #define REG_PAUSE_ON_TH 0x15A8 /* RXD high watermark of overflow
153 * threshold configuration register */
154 #define REG_PAUSE_OFF_TH 0x15AA /* RXD lower watermark of overflow
155 * threshold configuration register */
157 /* Mailbox Register */
158 #define REG_MB_TXD_WR_IDX 0x15f0 /* double word align */
159 #define REG_MB_RXD_RD_IDX 0x15F4 /* RXD Read index (unit: 1536byets) */
161 /* Interrupt Status Register */
162 #define ISR_TIMER 1 /* Interrupt when Timer counts down to zero */
163 #define ISR_MANUAL 2 /* Software manual interrupt, for debug. Set
164 * when SW_MAN_INT_EN is set in Table 51
165 * Selene Master Control Register
166 * (Offset 0x1400). */
167 #define ISR_RXF_OV 4 /* RXF overflow interrupt */
168 #define ISR_TXF_UR 8 /* TXF underrun interrupt */
169 #define ISR_TXS_OV 0x10 /* Internal transmit status buffer full
170 * interrupt */
171 #define ISR_RXS_OV 0x20 /* Internal receive status buffer full
172 * interrupt */
173 #define ISR_LINK_CHG 0x40 /* Link Status Change Interrupt */
174 #define ISR_HOST_TXD_UR 0x80
175 #define ISR_HOST_RXD_OV 0x100 /* Host rx data memory full , one pulse */
176 #define ISR_DMAR_TO_RST 0x200 /* DMAR op timeout interrupt. SW should
177 * do Reset */
178 #define ISR_DMAW_TO_RST 0x400
179 #define ISR_PHY 0x800 /* phy interrupt */
180 #define ISR_TS_UPDATE 0x10000 /* interrupt after new tx pkt status written
181 * to host */
182 #define ISR_RS_UPDATE 0x20000 /* interrupt ater new rx pkt status written
183 * to host. */
184 #define ISR_TX_EARLY 0x40000 /* interrupt when txmac begin transmit one
185 * packet */
187 #define ISR_TX_EVENT (ISR_TXF_UR | ISR_TXS_OV | ISR_HOST_TXD_UR |\
188 ISR_TS_UPDATE | ISR_TX_EARLY)
189 #define ISR_RX_EVENT (ISR_RXF_OV | ISR_RXS_OV | ISR_HOST_RXD_OV |\
190 ISR_RS_UPDATE)
192 #define IMR_NORMAL_MASK (\
193 /*ISR_LINK_CHG |*/\
194 ISR_MANUAL |\
195 ISR_DMAR_TO_RST |\
196 ISR_DMAW_TO_RST |\
197 ISR_PHY |\
198 ISR_PHY_LINKDOWN |\
199 ISR_TS_UPDATE |\
200 ISR_RS_UPDATE)
202 /* Receive MAC Statistics Registers */
203 #define REG_STS_RX_PAUSE 0x1700 /* Num pause packets received */
204 #define REG_STS_RXD_OV 0x1704 /* Num frames dropped due to RX
205 * FIFO overflow */
206 #define REG_STS_RXS_OV 0x1708 /* Num frames dropped due to RX
207 * Status Buffer Overflow */
208 #define REG_STS_RX_FILTER 0x170C /* Num packets dropped due to
209 * address filtering */
211 /* MII definitions */
213 /* PHY Common Register */
214 #define MII_SMARTSPEED 0x14
215 #define MII_DBG_ADDR 0x1D
216 #define MII_DBG_DATA 0x1E
218 /* PCI Command Register Bit Definitions */
219 #define PCI_REG_COMMAND 0x04
220 #define CMD_IO_SPACE 0x0001
221 #define CMD_MEMORY_SPACE 0x0002
222 #define CMD_BUS_MASTER 0x0004
224 #define MEDIA_TYPE_100M_FULL 1
225 #define MEDIA_TYPE_100M_HALF 2
226 #define MEDIA_TYPE_10M_FULL 3
227 #define MEDIA_TYPE_10M_HALF 4
229 #define AUTONEG_ADVERTISE_SPEED_DEFAULT 0x000F /* Everything */
231 /* The size (in bytes) of a ethernet packet */
232 #define ENET_HEADER_SIZE 14
233 #define MAXIMUM_ETHERNET_FRAME_SIZE 1518 /* with FCS */
234 #define MINIMUM_ETHERNET_FRAME_SIZE 64 /* with FCS */
235 #define ETHERNET_FCS_SIZE 4
236 #define MAX_JUMBO_FRAME_SIZE 0x2000
237 #define VLAN_SIZE 4
239 struct tx_pkt_header {
240 unsigned pkt_size:11;
241 unsigned:4; /* reserved */
242 unsigned ins_vlan:1; /* txmac should insert vlan */
243 unsigned short vlan; /* vlan tag */
245 /* FIXME: replace above bitfields with MASK/SHIFT defines below */
246 #define TX_PKT_HEADER_SIZE_MASK 0x7FF
247 #define TX_PKT_HEADER_SIZE_SHIFT 0
248 #define TX_PKT_HEADER_INS_VLAN_MASK 0x1
249 #define TX_PKT_HEADER_INS_VLAN_SHIFT 15
250 #define TX_PKT_HEADER_VLAN_TAG_MASK 0xFFFF
251 #define TX_PKT_HEADER_VLAN_TAG_SHIFT 16
253 struct tx_pkt_status {
254 unsigned pkt_size:11;
255 unsigned:5; /* reserved */
256 unsigned ok:1; /* current packet transmitted without error */
257 unsigned bcast:1; /* broadcast packet */
258 unsigned mcast:1; /* multicast packet */
259 unsigned pause:1; /* transmiited a pause frame */
260 unsigned ctrl:1;
261 unsigned defer:1; /* current packet is xmitted with defer */
262 unsigned exc_defer:1;
263 unsigned single_col:1;
264 unsigned multi_col:1;
265 unsigned late_col:1;
266 unsigned abort_col:1;
267 unsigned underun:1; /* current packet is aborted
268 * due to txram underrun */
269 unsigned:3; /* reserved */
270 unsigned update:1; /* always 1'b1 in tx_status_buf */
272 /* FIXME: replace above bitfields with MASK/SHIFT defines below */
273 #define TX_PKT_STATUS_SIZE_MASK 0x7FF
274 #define TX_PKT_STATUS_SIZE_SHIFT 0
275 #define TX_PKT_STATUS_OK_MASK 0x1
276 #define TX_PKT_STATUS_OK_SHIFT 16
277 #define TX_PKT_STATUS_BCAST_MASK 0x1
278 #define TX_PKT_STATUS_BCAST_SHIFT 17
279 #define TX_PKT_STATUS_MCAST_MASK 0x1
280 #define TX_PKT_STATUS_MCAST_SHIFT 18
281 #define TX_PKT_STATUS_PAUSE_MASK 0x1
282 #define TX_PKT_STATUS_PAUSE_SHIFT 19
283 #define TX_PKT_STATUS_CTRL_MASK 0x1
284 #define TX_PKT_STATUS_CTRL_SHIFT 20
285 #define TX_PKT_STATUS_DEFER_MASK 0x1
286 #define TX_PKT_STATUS_DEFER_SHIFT 21
287 #define TX_PKT_STATUS_EXC_DEFER_MASK 0x1
288 #define TX_PKT_STATUS_EXC_DEFER_SHIFT 22
289 #define TX_PKT_STATUS_SINGLE_COL_MASK 0x1
290 #define TX_PKT_STATUS_SINGLE_COL_SHIFT 23
291 #define TX_PKT_STATUS_MULTI_COL_MASK 0x1
292 #define TX_PKT_STATUS_MULTI_COL_SHIFT 24
293 #define TX_PKT_STATUS_LATE_COL_MASK 0x1
294 #define TX_PKT_STATUS_LATE_COL_SHIFT 25
295 #define TX_PKT_STATUS_ABORT_COL_MASK 0x1
296 #define TX_PKT_STATUS_ABORT_COL_SHIFT 26
297 #define TX_PKT_STATUS_UNDERRUN_MASK 0x1
298 #define TX_PKT_STATUS_UNDERRUN_SHIFT 27
299 #define TX_PKT_STATUS_UPDATE_MASK 0x1
300 #define TX_PKT_STATUS_UPDATE_SHIFT 31
302 struct rx_pkt_status {
303 unsigned pkt_size:11; /* packet size, max 2047 bytes */
304 unsigned:5; /* reserved */
305 unsigned ok:1; /* current packet received ok without error */
306 unsigned bcast:1; /* current packet is broadcast */
307 unsigned mcast:1; /* current packet is multicast */
308 unsigned pause:1;
309 unsigned ctrl:1;
310 unsigned crc:1; /* received a packet with crc error */
311 unsigned code:1; /* received a packet with code error */
312 unsigned runt:1; /* received a packet less than 64 bytes
313 * with good crc */
314 unsigned frag:1; /* received a packet less than 64 bytes
315 * with bad crc */
316 unsigned trunc:1; /* current frame truncated due to rxram full */
317 unsigned align:1; /* this packet is alignment error */
318 unsigned vlan:1; /* this packet has vlan */
319 unsigned:3; /* reserved */
320 unsigned update:1;
321 unsigned short vtag; /* vlan tag */
322 unsigned:16;
324 /* FIXME: replace above bitfields with MASK/SHIFT defines below */
325 #define RX_PKT_STATUS_SIZE_MASK 0x7FF
326 #define RX_PKT_STATUS_SIZE_SHIFT 0
327 #define RX_PKT_STATUS_OK_MASK 0x1
328 #define RX_PKT_STATUS_OK_SHIFT 16
329 #define RX_PKT_STATUS_BCAST_MASK 0x1
330 #define RX_PKT_STATUS_BCAST_SHIFT 17
331 #define RX_PKT_STATUS_MCAST_MASK 0x1
332 #define RX_PKT_STATUS_MCAST_SHIFT 18
333 #define RX_PKT_STATUS_PAUSE_MASK 0x1
334 #define RX_PKT_STATUS_PAUSE_SHIFT 19
335 #define RX_PKT_STATUS_CTRL_MASK 0x1
336 #define RX_PKT_STATUS_CTRL_SHIFT 20
337 #define RX_PKT_STATUS_CRC_MASK 0x1
338 #define RX_PKT_STATUS_CRC_SHIFT 21
339 #define RX_PKT_STATUS_CODE_MASK 0x1
340 #define RX_PKT_STATUS_CODE_SHIFT 22
341 #define RX_PKT_STATUS_RUNT_MASK 0x1
342 #define RX_PKT_STATUS_RUNT_SHIFT 23
343 #define RX_PKT_STATUS_FRAG_MASK 0x1
344 #define RX_PKT_STATUS_FRAG_SHIFT 24
345 #define RX_PKT_STATUS_TRUNK_MASK 0x1
346 #define RX_PKT_STATUS_TRUNK_SHIFT 25
347 #define RX_PKT_STATUS_ALIGN_MASK 0x1
348 #define RX_PKT_STATUS_ALIGN_SHIFT 26
349 #define RX_PKT_STATUS_VLAN_MASK 0x1
350 #define RX_PKT_STATUS_VLAN_SHIFT 27
351 #define RX_PKT_STATUS_UPDATE_MASK 0x1
352 #define RX_PKT_STATUS_UPDATE_SHIFT 31
353 #define RX_PKT_STATUS_VLAN_TAG_MASK 0xFFFF
354 #define RX_PKT_STATUS_VLAN_TAG_SHIFT 32
356 struct rx_desc {
357 struct rx_pkt_status status;
358 unsigned char packet[1536-sizeof(struct rx_pkt_status)];
361 enum atl2_speed_duplex {
362 atl2_10_half = 0,
363 atl2_10_full = 1,
364 atl2_100_half = 2,
365 atl2_100_full = 3
368 struct atl2_spi_flash_dev {
369 const char *manu_name; /* manufacturer id */
370 /* op-code */
371 u8 cmdWRSR;
372 u8 cmdREAD;
373 u8 cmdPROGRAM;
374 u8 cmdWREN;
375 u8 cmdWRDI;
376 u8 cmdRDSR;
377 u8 cmdRDID;
378 u8 cmdSECTOR_ERASE;
379 u8 cmdCHIP_ERASE;
382 /* Structure containing variables used by the shared code (atl2_hw.c) */
383 struct atl2_hw {
384 u8 __iomem *hw_addr;
385 void *back;
387 u8 preamble_len;
388 u8 max_retry; /* Retransmission maximum, afterwards the
389 * packet will be discarded. */
390 u8 jam_ipg; /* IPG to start JAM for collision based flow
391 * control in half-duplex mode. In unit of
392 * 8-bit time. */
393 u8 ipgt; /* Desired back to back inter-packet gap. The
394 * default is 96-bit time. */
395 u8 min_ifg; /* Minimum number of IFG to enforce in between
396 * RX frames. Frame gap below such IFP is
397 * dropped. */
398 u8 ipgr1; /* 64bit Carrier-Sense window */
399 u8 ipgr2; /* 96-bit IPG window */
400 u8 retry_buf; /* When half-duplex mode, should hold some
401 * bytes for mac retry . (8*4bytes unit) */
403 u16 fc_rxd_hi;
404 u16 fc_rxd_lo;
405 u16 lcol; /* Collision Window */
406 u16 max_frame_size;
408 u16 MediaType;
409 u16 autoneg_advertised;
410 u16 pci_cmd_word;
412 u16 mii_autoneg_adv_reg;
414 u32 mem_rang;
415 u32 txcw;
416 u32 mc_filter_type;
417 u32 num_mc_addrs;
418 u32 collision_delta;
419 u32 tx_packet_delta;
420 u16 phy_spd_default;
422 u16 device_id;
423 u16 vendor_id;
424 u16 subsystem_id;
425 u16 subsystem_vendor_id;
426 u8 revision_id;
428 /* spi flash */
429 u8 flash_vendor;
431 u8 dma_fairness;
432 u8 mac_addr[NODE_ADDRESS_SIZE];
433 u8 perm_mac_addr[NODE_ADDRESS_SIZE];
435 /* FIXME */
436 /* bool phy_preamble_sup; */
437 bool phy_configured;
440 #endif /* _ATL2_HW_H_ */
442 struct atl2_ring_header {
443 /* pointer to the descriptor ring memory */
444 void *desc;
445 /* physical adress of the descriptor ring */
446 dma_addr_t dma;
447 /* length of descriptor ring in bytes */
448 unsigned int size;
451 /* board specific private data structure */
452 struct atl2_adapter {
453 /* OS defined structs */
454 struct net_device *netdev;
455 struct pci_dev *pdev;
456 #ifdef NETIF_F_HW_VLAN_TX
457 struct vlan_group *vlgrp;
458 #endif
459 u32 wol;
460 u16 link_speed;
461 u16 link_duplex;
463 spinlock_t stats_lock;
465 struct work_struct reset_task;
466 struct work_struct link_chg_task;
467 struct timer_list watchdog_timer;
468 struct timer_list phy_config_timer;
470 unsigned long cfg_phy;
471 bool mac_disabled;
473 /* All Descriptor memory */
474 dma_addr_t ring_dma;
475 void *ring_vir_addr;
476 int ring_size;
478 struct tx_pkt_header *txd_ring;
479 dma_addr_t txd_dma;
481 struct tx_pkt_status *txs_ring;
482 dma_addr_t txs_dma;
484 struct rx_desc *rxd_ring;
485 dma_addr_t rxd_dma;
487 u32 txd_ring_size; /* bytes per unit */
488 u32 txs_ring_size; /* dwords per unit */
489 u32 rxd_ring_size; /* 1536 bytes per unit */
491 /* read /write ptr: */
492 /* host */
493 u32 txd_write_ptr;
494 u32 txs_next_clear;
495 u32 rxd_read_ptr;
497 /* nic */
498 atomic_t txd_read_ptr;
499 atomic_t txs_write_ptr;
500 u32 rxd_write_ptr;
502 /* Interrupt Moderator timer ( 2us resolution) */
503 u16 imt;
504 /* Interrupt Clear timer (2us resolution) */
505 u16 ict;
507 unsigned long flags;
508 /* structs defined in atl2_hw.h */
509 u32 bd_number; /* board number */
510 bool pci_using_64;
511 bool have_msi;
512 struct atl2_hw hw;
514 u32 usr_cmd;
515 /* FIXME */
516 /* u32 regs_buff[ATL2_REGS_LEN]; */
517 u32 pci_state[16];
519 u32 *config_space;
522 enum atl2_state_t {
523 __ATL2_TESTING,
524 __ATL2_RESETTING,
525 __ATL2_DOWN
528 #endif /* _ATL2_H_ */