2 * Copyright 2002-2005, Instant802 Networks, Inc.
3 * Copyright 2005-2006, Devicescape Software, Inc.
4 * Copyright 2006-2007 Jiri Benc <jbenc@suse.cz>
5 * Copyright 2007 Johannes Berg <johannes@sipsolutions.net>
6 * Copyright 2013-2014 Intel Mobile Communications GmbH
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License version 2 as
10 * published by the Free Software Foundation.
13 * Transmit and frame generation functions.
16 #include <linux/kernel.h>
17 #include <linux/slab.h>
18 #include <linux/skbuff.h>
19 #include <linux/etherdevice.h>
20 #include <linux/bitmap.h>
21 #include <linux/rcupdate.h>
22 #include <linux/export.h>
23 #include <net/net_namespace.h>
24 #include <net/ieee80211_radiotap.h>
25 #include <net/cfg80211.h>
26 #include <net/mac80211.h>
27 #include <asm/unaligned.h>
29 #include "ieee80211_i.h"
30 #include "driver-ops.h"
40 static inline void ieee80211_tx_stats(struct net_device
*dev
, u32 len
)
42 struct pcpu_sw_netstats
*tstats
= this_cpu_ptr(dev
->tstats
);
44 u64_stats_update_begin(&tstats
->syncp
);
46 tstats
->tx_bytes
+= len
;
47 u64_stats_update_end(&tstats
->syncp
);
50 static __le16
ieee80211_duration(struct ieee80211_tx_data
*tx
,
51 struct sk_buff
*skb
, int group_addr
,
54 int rate
, mrate
, erp
, dur
, i
, shift
= 0;
55 struct ieee80211_rate
*txrate
;
56 struct ieee80211_local
*local
= tx
->local
;
57 struct ieee80211_supported_band
*sband
;
58 struct ieee80211_hdr
*hdr
;
59 struct ieee80211_tx_info
*info
= IEEE80211_SKB_CB(skb
);
60 struct ieee80211_chanctx_conf
*chanctx_conf
;
64 chanctx_conf
= rcu_dereference(tx
->sdata
->vif
.chanctx_conf
);
66 shift
= ieee80211_chandef_get_shift(&chanctx_conf
->def
);
67 rate_flags
= ieee80211_chandef_rate_flags(&chanctx_conf
->def
);
71 /* assume HW handles this */
72 if (tx
->rate
.flags
& (IEEE80211_TX_RC_MCS
| IEEE80211_TX_RC_VHT_MCS
))
76 if (WARN_ON_ONCE(tx
->rate
.idx
< 0))
79 sband
= local
->hw
.wiphy
->bands
[info
->band
];
80 txrate
= &sband
->bitrates
[tx
->rate
.idx
];
82 erp
= txrate
->flags
& IEEE80211_RATE_ERP_G
;
85 * data and mgmt (except PS Poll):
87 * - during contention period:
88 * if addr1 is group address: 0
89 * if more fragments = 0 and addr1 is individual address: time to
90 * transmit one ACK plus SIFS
91 * if more fragments = 1 and addr1 is individual address: time to
92 * transmit next fragment plus 2 x ACK plus 3 x SIFS
95 * - control response frame (CTS or ACK) shall be transmitted using the
96 * same rate as the immediately previous frame in the frame exchange
97 * sequence, if this rate belongs to the PHY mandatory rates, or else
98 * at the highest possible rate belonging to the PHY rates in the
101 hdr
= (struct ieee80211_hdr
*)skb
->data
;
102 if (ieee80211_is_ctl(hdr
->frame_control
)) {
103 /* TODO: These control frames are not currently sent by
104 * mac80211, but should they be implemented, this function
105 * needs to be updated to support duration field calculation.
107 * RTS: time needed to transmit pending data/mgmt frame plus
108 * one CTS frame plus one ACK frame plus 3 x SIFS
109 * CTS: duration of immediately previous RTS minus time
110 * required to transmit CTS and its SIFS
111 * ACK: 0 if immediately previous directed data/mgmt had
112 * more=0, with more=1 duration in ACK frame is duration
113 * from previous frame minus time needed to transmit ACK
115 * PS Poll: BIT(15) | BIT(14) | aid
121 if (0 /* FIX: data/mgmt during CFP */)
122 return cpu_to_le16(32768);
124 if (group_addr
) /* Group address as the destination - no ACK */
127 /* Individual destination address:
128 * IEEE 802.11, Ch. 9.6 (after IEEE 802.11g changes)
129 * CTS and ACK frames shall be transmitted using the highest rate in
130 * basic rate set that is less than or equal to the rate of the
131 * immediately previous frame and that is using the same modulation
132 * (CCK or OFDM). If no basic rate set matches with these requirements,
133 * the highest mandatory rate of the PHY that is less than or equal to
134 * the rate of the previous frame is used.
135 * Mandatory rates for IEEE 802.11g PHY: 1, 2, 5.5, 11, 6, 12, 24 Mbps
138 /* use lowest available if everything fails */
139 mrate
= sband
->bitrates
[0].bitrate
;
140 for (i
= 0; i
< sband
->n_bitrates
; i
++) {
141 struct ieee80211_rate
*r
= &sband
->bitrates
[i
];
143 if (r
->bitrate
> txrate
->bitrate
)
146 if ((rate_flags
& r
->flags
) != rate_flags
)
149 if (tx
->sdata
->vif
.bss_conf
.basic_rates
& BIT(i
))
150 rate
= DIV_ROUND_UP(r
->bitrate
, 1 << shift
);
152 switch (sband
->band
) {
153 case IEEE80211_BAND_2GHZ
: {
155 if (tx
->sdata
->flags
& IEEE80211_SDATA_OPERATING_GMODE
)
156 flag
= IEEE80211_RATE_MANDATORY_G
;
158 flag
= IEEE80211_RATE_MANDATORY_B
;
163 case IEEE80211_BAND_5GHZ
:
164 if (r
->flags
& IEEE80211_RATE_MANDATORY_A
)
167 case IEEE80211_BAND_60GHZ
:
168 /* TODO, for now fall through */
169 case IEEE80211_NUM_BANDS
:
175 /* No matching basic rate found; use highest suitable mandatory
177 rate
= DIV_ROUND_UP(mrate
, 1 << shift
);
180 /* Don't calculate ACKs for QoS Frames with NoAck Policy set */
181 if (ieee80211_is_data_qos(hdr
->frame_control
) &&
182 *(ieee80211_get_qos_ctl(hdr
)) & IEEE80211_QOS_CTL_ACK_POLICY_NOACK
)
185 /* Time needed to transmit ACK
186 * (10 bytes + 4-byte FCS = 112 bits) plus SIFS; rounded up
187 * to closest integer */
188 dur
= ieee80211_frame_duration(sband
->band
, 10, rate
, erp
,
189 tx
->sdata
->vif
.bss_conf
.use_short_preamble
,
193 /* Frame is fragmented: duration increases with time needed to
194 * transmit next fragment plus ACK and 2 x SIFS. */
195 dur
*= 2; /* ACK + SIFS */
197 dur
+= ieee80211_frame_duration(sband
->band
, next_frag_len
,
198 txrate
->bitrate
, erp
,
199 tx
->sdata
->vif
.bss_conf
.use_short_preamble
,
203 return cpu_to_le16(dur
);
207 static ieee80211_tx_result debug_noinline
208 ieee80211_tx_h_dynamic_ps(struct ieee80211_tx_data
*tx
)
210 struct ieee80211_local
*local
= tx
->local
;
211 struct ieee80211_if_managed
*ifmgd
;
213 /* driver doesn't support power save */
214 if (!ieee80211_hw_check(&local
->hw
, SUPPORTS_PS
))
217 /* hardware does dynamic power save */
218 if (ieee80211_hw_check(&local
->hw
, SUPPORTS_DYNAMIC_PS
))
221 /* dynamic power save disabled */
222 if (local
->hw
.conf
.dynamic_ps_timeout
<= 0)
225 /* we are scanning, don't enable power save */
229 if (!local
->ps_sdata
)
232 /* No point if we're going to suspend */
233 if (local
->quiescing
)
236 /* dynamic ps is supported only in managed mode */
237 if (tx
->sdata
->vif
.type
!= NL80211_IFTYPE_STATION
)
240 ifmgd
= &tx
->sdata
->u
.mgd
;
243 * Don't wakeup from power save if u-apsd is enabled, voip ac has
244 * u-apsd enabled and the frame is in voip class. This effectively
245 * means that even if all access categories have u-apsd enabled, in
246 * practise u-apsd is only used with the voip ac. This is a
247 * workaround for the case when received voip class packets do not
248 * have correct qos tag for some reason, due the network or the
251 * Note: ifmgd->uapsd_queues access is racy here. If the value is
252 * changed via debugfs, user needs to reassociate manually to have
253 * everything in sync.
255 if ((ifmgd
->flags
& IEEE80211_STA_UAPSD_ENABLED
) &&
256 (ifmgd
->uapsd_queues
& IEEE80211_WMM_IE_STA_QOSINFO_AC_VO
) &&
257 skb_get_queue_mapping(tx
->skb
) == IEEE80211_AC_VO
)
260 if (local
->hw
.conf
.flags
& IEEE80211_CONF_PS
) {
261 ieee80211_stop_queues_by_reason(&local
->hw
,
262 IEEE80211_MAX_QUEUE_MAP
,
263 IEEE80211_QUEUE_STOP_REASON_PS
,
265 ifmgd
->flags
&= ~IEEE80211_STA_NULLFUNC_ACKED
;
266 ieee80211_queue_work(&local
->hw
,
267 &local
->dynamic_ps_disable_work
);
270 /* Don't restart the timer if we're not disassociated */
271 if (!ifmgd
->associated
)
274 mod_timer(&local
->dynamic_ps_timer
, jiffies
+
275 msecs_to_jiffies(local
->hw
.conf
.dynamic_ps_timeout
));
280 static ieee80211_tx_result debug_noinline
281 ieee80211_tx_h_check_assoc(struct ieee80211_tx_data
*tx
)
284 struct ieee80211_hdr
*hdr
= (struct ieee80211_hdr
*)tx
->skb
->data
;
285 struct ieee80211_tx_info
*info
= IEEE80211_SKB_CB(tx
->skb
);
288 if (unlikely(info
->flags
& IEEE80211_TX_CTL_INJECTED
))
291 if (unlikely(test_bit(SCAN_SW_SCANNING
, &tx
->local
->scanning
)) &&
292 test_bit(SDATA_STATE_OFFCHANNEL
, &tx
->sdata
->state
) &&
293 !ieee80211_is_probe_req(hdr
->frame_control
) &&
294 !ieee80211_is_nullfunc(hdr
->frame_control
))
296 * When software scanning only nullfunc frames (to notify
297 * the sleep state to the AP) and probe requests (for the
298 * active scan) are allowed, all other frames should not be
299 * sent and we should not get here, but if we do
300 * nonetheless, drop them to avoid sending them
301 * off-channel. See the link below and
302 * ieee80211_start_scan() for more.
304 * http://article.gmane.org/gmane.linux.kernel.wireless.general/30089
308 if (tx
->sdata
->vif
.type
== NL80211_IFTYPE_OCB
)
311 if (tx
->sdata
->vif
.type
== NL80211_IFTYPE_WDS
)
314 if (tx
->flags
& IEEE80211_TX_PS_BUFFERED
)
318 assoc
= test_sta_flag(tx
->sta
, WLAN_STA_ASSOC
);
320 if (likely(tx
->flags
& IEEE80211_TX_UNICAST
)) {
321 if (unlikely(!assoc
&&
322 ieee80211_is_data(hdr
->frame_control
))) {
323 #ifdef CONFIG_MAC80211_VERBOSE_DEBUG
324 sdata_info(tx
->sdata
,
325 "dropped data frame to not associated station %pM\n",
328 I802_DEBUG_INC(tx
->local
->tx_handlers_drop_not_assoc
);
331 } else if (unlikely(tx
->sdata
->vif
.type
== NL80211_IFTYPE_AP
&&
332 ieee80211_is_data(hdr
->frame_control
) &&
333 !atomic_read(&tx
->sdata
->u
.ap
.num_mcast_sta
))) {
335 * No associated STAs - no need to send multicast
344 /* This function is called whenever the AP is about to exceed the maximum limit
345 * of buffered frames for power saving STAs. This situation should not really
346 * happen often during normal operation, so dropping the oldest buffered packet
347 * from each queue should be OK to make some room for new frames. */
348 static void purge_old_ps_buffers(struct ieee80211_local
*local
)
350 int total
= 0, purged
= 0;
352 struct ieee80211_sub_if_data
*sdata
;
353 struct sta_info
*sta
;
355 list_for_each_entry_rcu(sdata
, &local
->interfaces
, list
) {
358 if (sdata
->vif
.type
== NL80211_IFTYPE_AP
)
359 ps
= &sdata
->u
.ap
.ps
;
360 else if (ieee80211_vif_is_mesh(&sdata
->vif
))
361 ps
= &sdata
->u
.mesh
.ps
;
365 skb
= skb_dequeue(&ps
->bc_buf
);
370 total
+= skb_queue_len(&ps
->bc_buf
);
374 * Drop one frame from each station from the lowest-priority
375 * AC that has frames at all.
377 list_for_each_entry_rcu(sta
, &local
->sta_list
, list
) {
380 for (ac
= IEEE80211_AC_BK
; ac
>= IEEE80211_AC_VO
; ac
--) {
381 skb
= skb_dequeue(&sta
->ps_tx_buf
[ac
]);
382 total
+= skb_queue_len(&sta
->ps_tx_buf
[ac
]);
385 ieee80211_free_txskb(&local
->hw
, skb
);
391 local
->total_ps_buffered
= total
;
392 ps_dbg_hw(&local
->hw
, "PS buffers full - purged %d frames\n", purged
);
395 static ieee80211_tx_result
396 ieee80211_tx_h_multicast_ps_buf(struct ieee80211_tx_data
*tx
)
398 struct ieee80211_tx_info
*info
= IEEE80211_SKB_CB(tx
->skb
);
399 struct ieee80211_hdr
*hdr
= (struct ieee80211_hdr
*)tx
->skb
->data
;
403 * broadcast/multicast frame
405 * If any of the associated/peer stations is in power save mode,
406 * the frame is buffered to be sent after DTIM beacon frame.
407 * This is done either by the hardware or us.
410 /* powersaving STAs currently only in AP/VLAN/mesh mode */
411 if (tx
->sdata
->vif
.type
== NL80211_IFTYPE_AP
||
412 tx
->sdata
->vif
.type
== NL80211_IFTYPE_AP_VLAN
) {
416 ps
= &tx
->sdata
->bss
->ps
;
417 } else if (ieee80211_vif_is_mesh(&tx
->sdata
->vif
)) {
418 ps
= &tx
->sdata
->u
.mesh
.ps
;
424 /* no buffering for ordered frames */
425 if (ieee80211_has_order(hdr
->frame_control
))
428 if (ieee80211_is_probe_req(hdr
->frame_control
))
431 if (ieee80211_hw_check(&tx
->local
->hw
, QUEUE_CONTROL
))
432 info
->hw_queue
= tx
->sdata
->vif
.cab_queue
;
434 /* no stations in PS mode */
435 if (!atomic_read(&ps
->num_sta_ps
))
438 info
->flags
|= IEEE80211_TX_CTL_SEND_AFTER_DTIM
;
440 /* device releases frame after DTIM beacon */
441 if (!ieee80211_hw_check(&tx
->local
->hw
, HOST_BROADCAST_PS_BUFFERING
))
444 /* buffered in mac80211 */
445 if (tx
->local
->total_ps_buffered
>= TOTAL_MAX_TX_BUFFER
)
446 purge_old_ps_buffers(tx
->local
);
448 if (skb_queue_len(&ps
->bc_buf
) >= AP_MAX_BC_BUFFER
) {
450 "BC TX buffer full - dropping the oldest frame\n");
451 dev_kfree_skb(skb_dequeue(&ps
->bc_buf
));
453 tx
->local
->total_ps_buffered
++;
455 skb_queue_tail(&ps
->bc_buf
, tx
->skb
);
460 static int ieee80211_use_mfp(__le16 fc
, struct sta_info
*sta
,
463 if (!ieee80211_is_mgmt(fc
))
466 if (sta
== NULL
|| !test_sta_flag(sta
, WLAN_STA_MFP
))
469 if (!ieee80211_is_robust_mgmt_frame(skb
))
475 static ieee80211_tx_result
476 ieee80211_tx_h_unicast_ps_buf(struct ieee80211_tx_data
*tx
)
478 struct sta_info
*sta
= tx
->sta
;
479 struct ieee80211_tx_info
*info
= IEEE80211_SKB_CB(tx
->skb
);
480 struct ieee80211_hdr
*hdr
= (struct ieee80211_hdr
*)tx
->skb
->data
;
481 struct ieee80211_local
*local
= tx
->local
;
486 if (unlikely((test_sta_flag(sta
, WLAN_STA_PS_STA
) ||
487 test_sta_flag(sta
, WLAN_STA_PS_DRIVER
) ||
488 test_sta_flag(sta
, WLAN_STA_PS_DELIVER
)) &&
489 !(info
->flags
& IEEE80211_TX_CTL_NO_PS_BUFFER
))) {
490 int ac
= skb_get_queue_mapping(tx
->skb
);
492 if (ieee80211_is_mgmt(hdr
->frame_control
) &&
493 !ieee80211_is_bufferable_mmpdu(hdr
->frame_control
)) {
494 info
->flags
|= IEEE80211_TX_CTL_NO_PS_BUFFER
;
498 ps_dbg(sta
->sdata
, "STA %pM aid %d: PS buffer for AC %d\n",
499 sta
->sta
.addr
, sta
->sta
.aid
, ac
);
500 if (tx
->local
->total_ps_buffered
>= TOTAL_MAX_TX_BUFFER
)
501 purge_old_ps_buffers(tx
->local
);
503 /* sync with ieee80211_sta_ps_deliver_wakeup */
504 spin_lock(&sta
->ps_lock
);
506 * STA woke up the meantime and all the frames on ps_tx_buf have
507 * been queued to pending queue. No reordering can happen, go
508 * ahead and Tx the packet.
510 if (!test_sta_flag(sta
, WLAN_STA_PS_STA
) &&
511 !test_sta_flag(sta
, WLAN_STA_PS_DRIVER
) &&
512 !test_sta_flag(sta
, WLAN_STA_PS_DELIVER
)) {
513 spin_unlock(&sta
->ps_lock
);
517 if (skb_queue_len(&sta
->ps_tx_buf
[ac
]) >= STA_MAX_TX_BUFFER
) {
518 struct sk_buff
*old
= skb_dequeue(&sta
->ps_tx_buf
[ac
]);
520 "STA %pM TX buffer for AC %d full - dropping oldest frame\n",
522 ieee80211_free_txskb(&local
->hw
, old
);
524 tx
->local
->total_ps_buffered
++;
526 info
->control
.jiffies
= jiffies
;
527 info
->control
.vif
= &tx
->sdata
->vif
;
528 info
->flags
|= IEEE80211_TX_INTFL_NEED_TXPROCESSING
;
529 info
->flags
&= ~IEEE80211_TX_TEMPORARY_FLAGS
;
530 skb_queue_tail(&sta
->ps_tx_buf
[ac
], tx
->skb
);
531 spin_unlock(&sta
->ps_lock
);
533 if (!timer_pending(&local
->sta_cleanup
))
534 mod_timer(&local
->sta_cleanup
,
535 round_jiffies(jiffies
+
536 STA_INFO_CLEANUP_INTERVAL
));
539 * We queued up some frames, so the TIM bit might
540 * need to be set, recalculate it.
542 sta_info_recalc_tim(sta
);
545 } else if (unlikely(test_sta_flag(sta
, WLAN_STA_PS_STA
))) {
547 "STA %pM in PS mode, but polling/in SP -> send frame\n",
554 static ieee80211_tx_result debug_noinline
555 ieee80211_tx_h_ps_buf(struct ieee80211_tx_data
*tx
)
557 if (unlikely(tx
->flags
& IEEE80211_TX_PS_BUFFERED
))
560 if (tx
->flags
& IEEE80211_TX_UNICAST
)
561 return ieee80211_tx_h_unicast_ps_buf(tx
);
563 return ieee80211_tx_h_multicast_ps_buf(tx
);
566 static ieee80211_tx_result debug_noinline
567 ieee80211_tx_h_check_control_port_protocol(struct ieee80211_tx_data
*tx
)
569 struct ieee80211_tx_info
*info
= IEEE80211_SKB_CB(tx
->skb
);
571 if (unlikely(tx
->sdata
->control_port_protocol
== tx
->skb
->protocol
)) {
572 if (tx
->sdata
->control_port_no_encrypt
)
573 info
->flags
|= IEEE80211_TX_INTFL_DONT_ENCRYPT
;
574 info
->control
.flags
|= IEEE80211_TX_CTRL_PORT_CTRL_PROTO
;
575 info
->flags
|= IEEE80211_TX_CTL_USE_MINRATE
;
581 static ieee80211_tx_result debug_noinline
582 ieee80211_tx_h_select_key(struct ieee80211_tx_data
*tx
)
584 struct ieee80211_key
*key
;
585 struct ieee80211_tx_info
*info
= IEEE80211_SKB_CB(tx
->skb
);
586 struct ieee80211_hdr
*hdr
= (struct ieee80211_hdr
*)tx
->skb
->data
;
588 if (unlikely(info
->flags
& IEEE80211_TX_INTFL_DONT_ENCRYPT
))
591 (key
= rcu_dereference(tx
->sta
->ptk
[tx
->sta
->ptk_idx
])))
593 else if (ieee80211_is_mgmt(hdr
->frame_control
) &&
594 is_multicast_ether_addr(hdr
->addr1
) &&
595 ieee80211_is_robust_mgmt_frame(tx
->skb
) &&
596 (key
= rcu_dereference(tx
->sdata
->default_mgmt_key
)))
598 else if (is_multicast_ether_addr(hdr
->addr1
) &&
599 (key
= rcu_dereference(tx
->sdata
->default_multicast_key
)))
601 else if (!is_multicast_ether_addr(hdr
->addr1
) &&
602 (key
= rcu_dereference(tx
->sdata
->default_unicast_key
)))
608 bool skip_hw
= false;
610 /* TODO: add threshold stuff again */
612 switch (tx
->key
->conf
.cipher
) {
613 case WLAN_CIPHER_SUITE_WEP40
:
614 case WLAN_CIPHER_SUITE_WEP104
:
615 case WLAN_CIPHER_SUITE_TKIP
:
616 if (!ieee80211_is_data_present(hdr
->frame_control
))
619 case WLAN_CIPHER_SUITE_CCMP
:
620 case WLAN_CIPHER_SUITE_CCMP_256
:
621 case WLAN_CIPHER_SUITE_GCMP
:
622 case WLAN_CIPHER_SUITE_GCMP_256
:
623 if (!ieee80211_is_data_present(hdr
->frame_control
) &&
624 !ieee80211_use_mfp(hdr
->frame_control
, tx
->sta
,
628 skip_hw
= (tx
->key
->conf
.flags
&
629 IEEE80211_KEY_FLAG_SW_MGMT_TX
) &&
630 ieee80211_is_mgmt(hdr
->frame_control
);
632 case WLAN_CIPHER_SUITE_AES_CMAC
:
633 case WLAN_CIPHER_SUITE_BIP_CMAC_256
:
634 case WLAN_CIPHER_SUITE_BIP_GMAC_128
:
635 case WLAN_CIPHER_SUITE_BIP_GMAC_256
:
636 if (!ieee80211_is_mgmt(hdr
->frame_control
))
641 if (unlikely(tx
->key
&& tx
->key
->flags
& KEY_FLAG_TAINTED
&&
642 !ieee80211_is_deauth(hdr
->frame_control
)))
645 if (!skip_hw
&& tx
->key
&&
646 tx
->key
->flags
& KEY_FLAG_UPLOADED_TO_HARDWARE
)
647 info
->control
.hw_key
= &tx
->key
->conf
;
653 static ieee80211_tx_result debug_noinline
654 ieee80211_tx_h_rate_ctrl(struct ieee80211_tx_data
*tx
)
656 struct ieee80211_tx_info
*info
= IEEE80211_SKB_CB(tx
->skb
);
657 struct ieee80211_hdr
*hdr
= (void *)tx
->skb
->data
;
658 struct ieee80211_supported_band
*sband
;
660 struct ieee80211_tx_rate_control txrc
;
661 struct ieee80211_sta_rates
*ratetbl
= NULL
;
664 memset(&txrc
, 0, sizeof(txrc
));
666 sband
= tx
->local
->hw
.wiphy
->bands
[info
->band
];
668 len
= min_t(u32
, tx
->skb
->len
+ FCS_LEN
,
669 tx
->local
->hw
.wiphy
->frag_threshold
);
671 /* set up the tx rate control struct we give the RC algo */
672 txrc
.hw
= &tx
->local
->hw
;
674 txrc
.bss_conf
= &tx
->sdata
->vif
.bss_conf
;
676 txrc
.reported_rate
.idx
= -1;
677 txrc
.rate_idx_mask
= tx
->sdata
->rc_rateidx_mask
[info
->band
];
678 if (txrc
.rate_idx_mask
== (1 << sband
->n_bitrates
) - 1)
679 txrc
.max_rate_idx
= -1;
681 txrc
.max_rate_idx
= fls(txrc
.rate_idx_mask
) - 1;
683 if (tx
->sdata
->rc_has_mcs_mask
[info
->band
])
684 txrc
.rate_idx_mcs_mask
=
685 tx
->sdata
->rc_rateidx_mcs_mask
[info
->band
];
687 txrc
.bss
= (tx
->sdata
->vif
.type
== NL80211_IFTYPE_AP
||
688 tx
->sdata
->vif
.type
== NL80211_IFTYPE_MESH_POINT
||
689 tx
->sdata
->vif
.type
== NL80211_IFTYPE_ADHOC
||
690 tx
->sdata
->vif
.type
== NL80211_IFTYPE_OCB
);
692 /* set up RTS protection if desired */
693 if (len
> tx
->local
->hw
.wiphy
->rts_threshold
) {
697 info
->control
.use_rts
= txrc
.rts
;
698 info
->control
.use_cts_prot
= tx
->sdata
->vif
.bss_conf
.use_cts_prot
;
701 * Use short preamble if the BSS can handle it, but not for
702 * management frames unless we know the receiver can handle
703 * that -- the management frame might be to a station that
704 * just wants a probe response.
706 if (tx
->sdata
->vif
.bss_conf
.use_short_preamble
&&
707 (ieee80211_is_data(hdr
->frame_control
) ||
708 (tx
->sta
&& test_sta_flag(tx
->sta
, WLAN_STA_SHORT_PREAMBLE
))))
709 txrc
.short_preamble
= true;
711 info
->control
.short_preamble
= txrc
.short_preamble
;
713 /* don't ask rate control when rate already injected via radiotap */
714 if (info
->control
.flags
& IEEE80211_TX_CTRL_RATE_INJECT
)
718 assoc
= test_sta_flag(tx
->sta
, WLAN_STA_ASSOC
);
721 * Lets not bother rate control if we're associated and cannot
722 * talk to the sta. This should not happen.
724 if (WARN(test_bit(SCAN_SW_SCANNING
, &tx
->local
->scanning
) && assoc
&&
725 !rate_usable_index_exists(sband
, &tx
->sta
->sta
),
726 "%s: Dropped data frame as no usable bitrate found while "
727 "scanning and associated. Target station: "
728 "%pM on %d GHz band\n",
729 tx
->sdata
->name
, hdr
->addr1
,
734 * If we're associated with the sta at this point we know we can at
735 * least send the frame at the lowest bit rate.
737 rate_control_get_rate(tx
->sdata
, tx
->sta
, &txrc
);
739 if (tx
->sta
&& !info
->control
.skip_table
)
740 ratetbl
= rcu_dereference(tx
->sta
->sta
.rates
);
742 if (unlikely(info
->control
.rates
[0].idx
< 0)) {
744 struct ieee80211_tx_rate rate
= {
745 .idx
= ratetbl
->rate
[0].idx
,
746 .flags
= ratetbl
->rate
[0].flags
,
747 .count
= ratetbl
->rate
[0].count
750 if (ratetbl
->rate
[0].idx
< 0)
758 tx
->rate
= info
->control
.rates
[0];
761 if (txrc
.reported_rate
.idx
< 0) {
762 txrc
.reported_rate
= tx
->rate
;
763 if (tx
->sta
&& ieee80211_is_data(hdr
->frame_control
))
764 tx
->sta
->tx_stats
.last_rate
= txrc
.reported_rate
;
766 tx
->sta
->tx_stats
.last_rate
= txrc
.reported_rate
;
771 if (unlikely(!info
->control
.rates
[0].count
))
772 info
->control
.rates
[0].count
= 1;
774 if (WARN_ON_ONCE((info
->control
.rates
[0].count
> 1) &&
775 (info
->flags
& IEEE80211_TX_CTL_NO_ACK
)))
776 info
->control
.rates
[0].count
= 1;
781 static __le16
ieee80211_tx_next_seq(struct sta_info
*sta
, int tid
)
783 u16
*seq
= &sta
->tid_seq
[tid
];
784 __le16 ret
= cpu_to_le16(*seq
);
786 /* Increase the sequence number. */
787 *seq
= (*seq
+ 0x10) & IEEE80211_SCTL_SEQ
;
792 static ieee80211_tx_result debug_noinline
793 ieee80211_tx_h_sequence(struct ieee80211_tx_data
*tx
)
795 struct ieee80211_tx_info
*info
= IEEE80211_SKB_CB(tx
->skb
);
796 struct ieee80211_hdr
*hdr
= (struct ieee80211_hdr
*)tx
->skb
->data
;
801 * Packet injection may want to control the sequence
802 * number, if we have no matching interface then we
803 * neither assign one ourselves nor ask the driver to.
805 if (unlikely(info
->control
.vif
->type
== NL80211_IFTYPE_MONITOR
))
808 if (unlikely(ieee80211_is_ctl(hdr
->frame_control
)))
811 if (ieee80211_hdrlen(hdr
->frame_control
) < 24)
814 if (ieee80211_is_qos_nullfunc(hdr
->frame_control
))
818 * Anything but QoS data that has a sequence number field
819 * (is long enough) gets a sequence number from the global
820 * counter. QoS data frames with a multicast destination
821 * also use the global counter (802.11-2012 9.3.2.10).
823 if (!ieee80211_is_data_qos(hdr
->frame_control
) ||
824 is_multicast_ether_addr(hdr
->addr1
)) {
825 /* driver should assign sequence number */
826 info
->flags
|= IEEE80211_TX_CTL_ASSIGN_SEQ
;
827 /* for pure STA mode without beacons, we can do it */
828 hdr
->seq_ctrl
= cpu_to_le16(tx
->sdata
->sequence_number
);
829 tx
->sdata
->sequence_number
+= 0x10;
831 tx
->sta
->tx_stats
.msdu
[IEEE80211_NUM_TIDS
]++;
836 * This should be true for injected/management frames only, for
837 * management frames we have set the IEEE80211_TX_CTL_ASSIGN_SEQ
838 * above since they are not QoS-data frames.
843 /* include per-STA, per-TID sequence counter */
845 qc
= ieee80211_get_qos_ctl(hdr
);
846 tid
= *qc
& IEEE80211_QOS_CTL_TID_MASK
;
847 tx
->sta
->tx_stats
.msdu
[tid
]++;
849 if (!tx
->sta
->sta
.txq
[0])
850 hdr
->seq_ctrl
= ieee80211_tx_next_seq(tx
->sta
, tid
);
855 static int ieee80211_fragment(struct ieee80211_tx_data
*tx
,
856 struct sk_buff
*skb
, int hdrlen
,
859 struct ieee80211_local
*local
= tx
->local
;
860 struct ieee80211_tx_info
*info
;
862 int per_fragm
= frag_threshold
- hdrlen
- FCS_LEN
;
863 int pos
= hdrlen
+ per_fragm
;
864 int rem
= skb
->len
- hdrlen
- per_fragm
;
866 if (WARN_ON(rem
< 0))
869 /* first fragment was already added to queue by caller */
872 int fraglen
= per_fragm
;
877 tmp
= dev_alloc_skb(local
->tx_headroom
+
879 tx
->sdata
->encrypt_headroom
+
880 IEEE80211_ENCRYPT_TAILROOM
);
884 __skb_queue_tail(&tx
->skbs
, tmp
);
887 local
->tx_headroom
+ tx
->sdata
->encrypt_headroom
);
889 /* copy control information */
890 memcpy(tmp
->cb
, skb
->cb
, sizeof(tmp
->cb
));
892 info
= IEEE80211_SKB_CB(tmp
);
893 info
->flags
&= ~(IEEE80211_TX_CTL_CLEAR_PS_FILT
|
894 IEEE80211_TX_CTL_FIRST_FRAGMENT
);
897 info
->flags
|= IEEE80211_TX_CTL_MORE_FRAMES
;
899 skb_copy_queue_mapping(tmp
, skb
);
900 tmp
->priority
= skb
->priority
;
903 /* copy header and data */
904 memcpy(skb_put(tmp
, hdrlen
), skb
->data
, hdrlen
);
905 memcpy(skb_put(tmp
, fraglen
), skb
->data
+ pos
, fraglen
);
910 /* adjust first fragment's length */
911 skb_trim(skb
, hdrlen
+ per_fragm
);
915 static ieee80211_tx_result debug_noinline
916 ieee80211_tx_h_fragment(struct ieee80211_tx_data
*tx
)
918 struct sk_buff
*skb
= tx
->skb
;
919 struct ieee80211_tx_info
*info
= IEEE80211_SKB_CB(skb
);
920 struct ieee80211_hdr
*hdr
= (void *)skb
->data
;
921 int frag_threshold
= tx
->local
->hw
.wiphy
->frag_threshold
;
925 /* no matter what happens, tx->skb moves to tx->skbs */
926 __skb_queue_tail(&tx
->skbs
, skb
);
929 if (info
->flags
& IEEE80211_TX_CTL_DONTFRAG
)
932 if (tx
->local
->ops
->set_frag_threshold
)
936 * Warn when submitting a fragmented A-MPDU frame and drop it.
937 * This scenario is handled in ieee80211_tx_prepare but extra
938 * caution taken here as fragmented ampdu may cause Tx stop.
940 if (WARN_ON(info
->flags
& IEEE80211_TX_CTL_AMPDU
))
943 hdrlen
= ieee80211_hdrlen(hdr
->frame_control
);
945 /* internal error, why isn't DONTFRAG set? */
946 if (WARN_ON(skb
->len
+ FCS_LEN
<= frag_threshold
))
950 * Now fragment the frame. This will allocate all the fragments and
951 * chain them (using skb as the first fragment) to skb->next.
952 * During transmission, we will remove the successfully transmitted
953 * fragments from this list. When the low-level driver rejects one
954 * of the fragments then we will simply pretend to accept the skb
955 * but store it away as pending.
957 if (ieee80211_fragment(tx
, skb
, hdrlen
, frag_threshold
))
960 /* update duration/seq/flags of fragments */
963 skb_queue_walk(&tx
->skbs
, skb
) {
964 const __le16 morefrags
= cpu_to_le16(IEEE80211_FCTL_MOREFRAGS
);
966 hdr
= (void *)skb
->data
;
967 info
= IEEE80211_SKB_CB(skb
);
969 if (!skb_queue_is_last(&tx
->skbs
, skb
)) {
970 hdr
->frame_control
|= morefrags
;
972 * No multi-rate retries for fragmented frames, that
973 * would completely throw off the NAV at other STAs.
975 info
->control
.rates
[1].idx
= -1;
976 info
->control
.rates
[2].idx
= -1;
977 info
->control
.rates
[3].idx
= -1;
978 BUILD_BUG_ON(IEEE80211_TX_MAX_RATES
!= 4);
979 info
->flags
&= ~IEEE80211_TX_CTL_RATE_CTRL_PROBE
;
981 hdr
->frame_control
&= ~morefrags
;
983 hdr
->seq_ctrl
|= cpu_to_le16(fragnum
& IEEE80211_SCTL_FRAG
);
990 static ieee80211_tx_result debug_noinline
991 ieee80211_tx_h_stats(struct ieee80211_tx_data
*tx
)
999 skb_queue_walk(&tx
->skbs
, skb
) {
1000 ac
= skb_get_queue_mapping(skb
);
1001 tx
->sta
->tx_stats
.bytes
[ac
] += skb
->len
;
1004 tx
->sta
->tx_stats
.packets
[ac
]++;
1009 static ieee80211_tx_result debug_noinline
1010 ieee80211_tx_h_encrypt(struct ieee80211_tx_data
*tx
)
1015 switch (tx
->key
->conf
.cipher
) {
1016 case WLAN_CIPHER_SUITE_WEP40
:
1017 case WLAN_CIPHER_SUITE_WEP104
:
1018 return ieee80211_crypto_wep_encrypt(tx
);
1019 case WLAN_CIPHER_SUITE_TKIP
:
1020 return ieee80211_crypto_tkip_encrypt(tx
);
1021 case WLAN_CIPHER_SUITE_CCMP
:
1022 return ieee80211_crypto_ccmp_encrypt(
1023 tx
, IEEE80211_CCMP_MIC_LEN
);
1024 case WLAN_CIPHER_SUITE_CCMP_256
:
1025 return ieee80211_crypto_ccmp_encrypt(
1026 tx
, IEEE80211_CCMP_256_MIC_LEN
);
1027 case WLAN_CIPHER_SUITE_AES_CMAC
:
1028 return ieee80211_crypto_aes_cmac_encrypt(tx
);
1029 case WLAN_CIPHER_SUITE_BIP_CMAC_256
:
1030 return ieee80211_crypto_aes_cmac_256_encrypt(tx
);
1031 case WLAN_CIPHER_SUITE_BIP_GMAC_128
:
1032 case WLAN_CIPHER_SUITE_BIP_GMAC_256
:
1033 return ieee80211_crypto_aes_gmac_encrypt(tx
);
1034 case WLAN_CIPHER_SUITE_GCMP
:
1035 case WLAN_CIPHER_SUITE_GCMP_256
:
1036 return ieee80211_crypto_gcmp_encrypt(tx
);
1038 return ieee80211_crypto_hw_encrypt(tx
);
1044 static ieee80211_tx_result debug_noinline
1045 ieee80211_tx_h_calculate_duration(struct ieee80211_tx_data
*tx
)
1047 struct sk_buff
*skb
;
1048 struct ieee80211_hdr
*hdr
;
1052 skb_queue_walk(&tx
->skbs
, skb
) {
1053 hdr
= (void *) skb
->data
;
1054 if (unlikely(ieee80211_is_pspoll(hdr
->frame_control
)))
1055 break; /* must not overwrite AID */
1056 if (!skb_queue_is_last(&tx
->skbs
, skb
)) {
1057 struct sk_buff
*next
= skb_queue_next(&tx
->skbs
, skb
);
1058 next_len
= next
->len
;
1061 group_addr
= is_multicast_ether_addr(hdr
->addr1
);
1064 ieee80211_duration(tx
, skb
, group_addr
, next_len
);
1070 /* actual transmit path */
1072 static bool ieee80211_tx_prep_agg(struct ieee80211_tx_data
*tx
,
1073 struct sk_buff
*skb
,
1074 struct ieee80211_tx_info
*info
,
1075 struct tid_ampdu_tx
*tid_tx
,
1078 bool queued
= false;
1079 bool reset_agg_timer
= false;
1080 struct sk_buff
*purge_skb
= NULL
;
1082 if (test_bit(HT_AGG_STATE_OPERATIONAL
, &tid_tx
->state
)) {
1083 info
->flags
|= IEEE80211_TX_CTL_AMPDU
;
1084 reset_agg_timer
= true;
1085 } else if (test_bit(HT_AGG_STATE_WANT_START
, &tid_tx
->state
)) {
1087 * nothing -- this aggregation session is being started
1088 * but that might still fail with the driver
1090 } else if (!tx
->sta
->sta
.txq
[tid
]) {
1091 spin_lock(&tx
->sta
->lock
);
1093 * Need to re-check now, because we may get here
1095 * 1) in the window during which the setup is actually
1096 * already done, but not marked yet because not all
1097 * packets are spliced over to the driver pending
1098 * queue yet -- if this happened we acquire the lock
1099 * either before or after the splice happens, but
1100 * need to recheck which of these cases happened.
1102 * 2) during session teardown, if the OPERATIONAL bit
1103 * was cleared due to the teardown but the pointer
1104 * hasn't been assigned NULL yet (or we loaded it
1105 * before it was assigned) -- in this case it may
1106 * now be NULL which means we should just let the
1107 * packet pass through because splicing the frames
1108 * back is already done.
1110 tid_tx
= rcu_dereference_protected_tid_tx(tx
->sta
, tid
);
1113 /* do nothing, let packet pass through */
1114 } else if (test_bit(HT_AGG_STATE_OPERATIONAL
, &tid_tx
->state
)) {
1115 info
->flags
|= IEEE80211_TX_CTL_AMPDU
;
1116 reset_agg_timer
= true;
1119 if (info
->flags
& IEEE80211_TX_CTL_NO_PS_BUFFER
) {
1120 clear_sta_flag(tx
->sta
, WLAN_STA_SP
);
1121 ps_dbg(tx
->sta
->sdata
,
1122 "STA %pM aid %d: SP frame queued, close the SP w/o telling the peer\n",
1123 tx
->sta
->sta
.addr
, tx
->sta
->sta
.aid
);
1125 info
->control
.vif
= &tx
->sdata
->vif
;
1126 info
->flags
|= IEEE80211_TX_INTFL_NEED_TXPROCESSING
;
1127 info
->flags
&= ~IEEE80211_TX_TEMPORARY_FLAGS
;
1128 __skb_queue_tail(&tid_tx
->pending
, skb
);
1129 if (skb_queue_len(&tid_tx
->pending
) > STA_MAX_TX_BUFFER
)
1130 purge_skb
= __skb_dequeue(&tid_tx
->pending
);
1132 spin_unlock(&tx
->sta
->lock
);
1135 ieee80211_free_txskb(&tx
->local
->hw
, purge_skb
);
1138 /* reset session timer */
1139 if (reset_agg_timer
&& tid_tx
->timeout
)
1140 tid_tx
->last_tx
= jiffies
;
1147 * pass %NULL for the station if unknown, a valid pointer if known
1148 * or an ERR_PTR() if the station is known not to exist
1150 static ieee80211_tx_result
1151 ieee80211_tx_prepare(struct ieee80211_sub_if_data
*sdata
,
1152 struct ieee80211_tx_data
*tx
,
1153 struct sta_info
*sta
, struct sk_buff
*skb
)
1155 struct ieee80211_local
*local
= sdata
->local
;
1156 struct ieee80211_hdr
*hdr
;
1157 struct ieee80211_tx_info
*info
= IEEE80211_SKB_CB(skb
);
1161 memset(tx
, 0, sizeof(*tx
));
1165 __skb_queue_head_init(&tx
->skbs
);
1168 * If this flag is set to true anywhere, and we get here,
1169 * we are doing the needed processing, so remove the flag
1172 info
->flags
&= ~IEEE80211_TX_INTFL_NEED_TXPROCESSING
;
1174 hdr
= (struct ieee80211_hdr
*) skb
->data
;
1180 if (sdata
->vif
.type
== NL80211_IFTYPE_AP_VLAN
) {
1181 tx
->sta
= rcu_dereference(sdata
->u
.vlan
.sta
);
1182 if (!tx
->sta
&& sdata
->wdev
.use_4addr
)
1184 } else if (info
->flags
& (IEEE80211_TX_INTFL_NL80211_FRAME_TX
|
1185 IEEE80211_TX_CTL_INJECTED
) ||
1186 tx
->sdata
->control_port_protocol
== tx
->skb
->protocol
) {
1187 tx
->sta
= sta_info_get_bss(sdata
, hdr
->addr1
);
1189 if (!tx
->sta
&& !is_multicast_ether_addr(hdr
->addr1
))
1190 tx
->sta
= sta_info_get(sdata
, hdr
->addr1
);
1193 if (tx
->sta
&& ieee80211_is_data_qos(hdr
->frame_control
) &&
1194 !ieee80211_is_qos_nullfunc(hdr
->frame_control
) &&
1195 ieee80211_hw_check(&local
->hw
, AMPDU_AGGREGATION
) &&
1196 !ieee80211_hw_check(&local
->hw
, TX_AMPDU_SETUP_IN_HW
)) {
1197 struct tid_ampdu_tx
*tid_tx
;
1199 qc
= ieee80211_get_qos_ctl(hdr
);
1200 tid
= *qc
& IEEE80211_QOS_CTL_TID_MASK
;
1202 tid_tx
= rcu_dereference(tx
->sta
->ampdu_mlme
.tid_tx
[tid
]);
1206 queued
= ieee80211_tx_prep_agg(tx
, skb
, info
,
1209 if (unlikely(queued
))
1214 if (is_multicast_ether_addr(hdr
->addr1
)) {
1215 tx
->flags
&= ~IEEE80211_TX_UNICAST
;
1216 info
->flags
|= IEEE80211_TX_CTL_NO_ACK
;
1218 tx
->flags
|= IEEE80211_TX_UNICAST
;
1220 if (!(info
->flags
& IEEE80211_TX_CTL_DONTFRAG
)) {
1221 if (!(tx
->flags
& IEEE80211_TX_UNICAST
) ||
1222 skb
->len
+ FCS_LEN
<= local
->hw
.wiphy
->frag_threshold
||
1223 info
->flags
& IEEE80211_TX_CTL_AMPDU
)
1224 info
->flags
|= IEEE80211_TX_CTL_DONTFRAG
;
1228 info
->flags
|= IEEE80211_TX_CTL_CLEAR_PS_FILT
;
1229 else if (test_and_clear_sta_flag(tx
->sta
, WLAN_STA_CLEAR_PS_FILT
)) {
1230 info
->flags
|= IEEE80211_TX_CTL_CLEAR_PS_FILT
;
1231 ieee80211_check_fast_xmit(tx
->sta
);
1234 info
->flags
|= IEEE80211_TX_CTL_FIRST_FRAGMENT
;
1239 static void ieee80211_drv_tx(struct ieee80211_local
*local
,
1240 struct ieee80211_vif
*vif
,
1241 struct ieee80211_sta
*pubsta
,
1242 struct sk_buff
*skb
)
1244 struct ieee80211_hdr
*hdr
= (struct ieee80211_hdr
*) skb
->data
;
1245 struct ieee80211_sub_if_data
*sdata
= vif_to_sdata(vif
);
1246 struct ieee80211_tx_info
*info
= IEEE80211_SKB_CB(skb
);
1247 struct ieee80211_tx_control control
= {
1250 struct ieee80211_txq
*txq
= NULL
;
1251 struct txq_info
*txqi
;
1254 if ((info
->flags
& IEEE80211_TX_CTL_SEND_AFTER_DTIM
) ||
1255 (info
->control
.flags
& IEEE80211_TX_CTRL_PS_RESPONSE
))
1258 if (!ieee80211_is_data(hdr
->frame_control
))
1262 u8 tid
= skb
->priority
& IEEE80211_QOS_CTL_TID_MASK
;
1264 txq
= pubsta
->txq
[tid
];
1273 txqi
= to_txq_info(txq
);
1274 atomic_inc(&sdata
->txqs_len
[ac
]);
1275 if (atomic_read(&sdata
->txqs_len
[ac
]) >= local
->hw
.txq_ac_max_pending
)
1276 netif_stop_subqueue(sdata
->dev
, ac
);
1278 spin_lock_bh(&txqi
->queue
.lock
);
1279 txqi
->byte_cnt
+= skb
->len
;
1280 __skb_queue_tail(&txqi
->queue
, skb
);
1281 spin_unlock_bh(&txqi
->queue
.lock
);
1283 drv_wake_tx_queue(local
, txqi
);
1288 drv_tx(local
, &control
, skb
);
1291 struct sk_buff
*ieee80211_tx_dequeue(struct ieee80211_hw
*hw
,
1292 struct ieee80211_txq
*txq
)
1294 struct ieee80211_local
*local
= hw_to_local(hw
);
1295 struct ieee80211_sub_if_data
*sdata
= vif_to_sdata(txq
->vif
);
1296 struct txq_info
*txqi
= container_of(txq
, struct txq_info
, txq
);
1297 struct ieee80211_hdr
*hdr
;
1298 struct sk_buff
*skb
= NULL
;
1301 spin_lock_bh(&txqi
->queue
.lock
);
1303 if (test_bit(IEEE80211_TXQ_STOP
, &txqi
->flags
))
1306 skb
= __skb_dequeue(&txqi
->queue
);
1310 txqi
->byte_cnt
-= skb
->len
;
1312 atomic_dec(&sdata
->txqs_len
[ac
]);
1313 if (__netif_subqueue_stopped(sdata
->dev
, ac
))
1314 ieee80211_propagate_queue_wake(local
, sdata
->vif
.hw_queue
[ac
]);
1316 hdr
= (struct ieee80211_hdr
*)skb
->data
;
1317 if (txq
->sta
&& ieee80211_is_data_qos(hdr
->frame_control
)) {
1318 struct sta_info
*sta
= container_of(txq
->sta
, struct sta_info
,
1320 struct ieee80211_tx_info
*info
= IEEE80211_SKB_CB(skb
);
1322 hdr
->seq_ctrl
= ieee80211_tx_next_seq(sta
, txq
->tid
);
1323 if (test_bit(IEEE80211_TXQ_AMPDU
, &txqi
->flags
))
1324 info
->flags
|= IEEE80211_TX_CTL_AMPDU
;
1326 info
->flags
&= ~IEEE80211_TX_CTL_AMPDU
;
1330 spin_unlock_bh(&txqi
->queue
.lock
);
1334 EXPORT_SYMBOL(ieee80211_tx_dequeue
);
1336 static bool ieee80211_tx_frags(struct ieee80211_local
*local
,
1337 struct ieee80211_vif
*vif
,
1338 struct ieee80211_sta
*sta
,
1339 struct sk_buff_head
*skbs
,
1342 struct sk_buff
*skb
, *tmp
;
1343 unsigned long flags
;
1345 skb_queue_walk_safe(skbs
, skb
, tmp
) {
1346 struct ieee80211_tx_info
*info
= IEEE80211_SKB_CB(skb
);
1347 int q
= info
->hw_queue
;
1349 #ifdef CONFIG_MAC80211_VERBOSE_DEBUG
1350 if (WARN_ON_ONCE(q
>= local
->hw
.queues
)) {
1351 __skb_unlink(skb
, skbs
);
1352 ieee80211_free_txskb(&local
->hw
, skb
);
1357 spin_lock_irqsave(&local
->queue_stop_reason_lock
, flags
);
1358 if (local
->queue_stop_reasons
[q
] ||
1359 (!txpending
&& !skb_queue_empty(&local
->pending
[q
]))) {
1360 if (unlikely(info
->flags
&
1361 IEEE80211_TX_INTFL_OFFCHAN_TX_OK
)) {
1362 if (local
->queue_stop_reasons
[q
] &
1363 ~BIT(IEEE80211_QUEUE_STOP_REASON_OFFCHANNEL
)) {
1365 * Drop off-channel frames if queues
1366 * are stopped for any reason other
1367 * than off-channel operation. Never
1370 spin_unlock_irqrestore(
1371 &local
->queue_stop_reason_lock
,
1373 ieee80211_purge_tx_queue(&local
->hw
,
1380 * Since queue is stopped, queue up frames for
1381 * later transmission from the tx-pending
1382 * tasklet when the queue is woken again.
1385 skb_queue_splice_init(skbs
,
1386 &local
->pending
[q
]);
1388 skb_queue_splice_tail_init(skbs
,
1389 &local
->pending
[q
]);
1391 spin_unlock_irqrestore(&local
->queue_stop_reason_lock
,
1396 spin_unlock_irqrestore(&local
->queue_stop_reason_lock
, flags
);
1398 info
->control
.vif
= vif
;
1400 __skb_unlink(skb
, skbs
);
1401 ieee80211_drv_tx(local
, vif
, sta
, skb
);
1408 * Returns false if the frame couldn't be transmitted but was queued instead.
1410 static bool __ieee80211_tx(struct ieee80211_local
*local
,
1411 struct sk_buff_head
*skbs
, int led_len
,
1412 struct sta_info
*sta
, bool txpending
)
1414 struct ieee80211_tx_info
*info
;
1415 struct ieee80211_sub_if_data
*sdata
;
1416 struct ieee80211_vif
*vif
;
1417 struct ieee80211_sta
*pubsta
;
1418 struct sk_buff
*skb
;
1422 if (WARN_ON(skb_queue_empty(skbs
)))
1425 skb
= skb_peek(skbs
);
1426 fc
= ((struct ieee80211_hdr
*)skb
->data
)->frame_control
;
1427 info
= IEEE80211_SKB_CB(skb
);
1428 sdata
= vif_to_sdata(info
->control
.vif
);
1429 if (sta
&& !sta
->uploaded
)
1437 switch (sdata
->vif
.type
) {
1438 case NL80211_IFTYPE_MONITOR
:
1439 if (sdata
->u
.mntr_flags
& MONITOR_FLAG_ACTIVE
) {
1443 sdata
= rcu_dereference(local
->monitor_sdata
);
1447 vif
->hw_queue
[skb_get_queue_mapping(skb
)];
1448 } else if (ieee80211_hw_check(&local
->hw
, QUEUE_CONTROL
)) {
1449 ieee80211_purge_tx_queue(&local
->hw
, skbs
);
1454 case NL80211_IFTYPE_AP_VLAN
:
1455 sdata
= container_of(sdata
->bss
,
1456 struct ieee80211_sub_if_data
, u
.ap
);
1463 result
= ieee80211_tx_frags(local
, vif
, pubsta
, skbs
,
1466 ieee80211_tpt_led_trig_tx(local
, fc
, led_len
);
1468 WARN_ON_ONCE(!skb_queue_empty(skbs
));
1474 * Invoke TX handlers, return 0 on success and non-zero if the
1475 * frame was dropped or queued.
1477 static int invoke_tx_handlers(struct ieee80211_tx_data
*tx
)
1479 struct ieee80211_tx_info
*info
= IEEE80211_SKB_CB(tx
->skb
);
1480 ieee80211_tx_result res
= TX_DROP
;
1482 #define CALL_TXH(txh) \
1485 if (res != TX_CONTINUE) \
1489 CALL_TXH(ieee80211_tx_h_dynamic_ps
);
1490 CALL_TXH(ieee80211_tx_h_check_assoc
);
1491 CALL_TXH(ieee80211_tx_h_ps_buf
);
1492 CALL_TXH(ieee80211_tx_h_check_control_port_protocol
);
1493 CALL_TXH(ieee80211_tx_h_select_key
);
1494 if (!ieee80211_hw_check(&tx
->local
->hw
, HAS_RATE_CONTROL
))
1495 CALL_TXH(ieee80211_tx_h_rate_ctrl
);
1497 if (unlikely(info
->flags
& IEEE80211_TX_INTFL_RETRANSMISSION
)) {
1498 __skb_queue_tail(&tx
->skbs
, tx
->skb
);
1503 CALL_TXH(ieee80211_tx_h_michael_mic_add
);
1504 CALL_TXH(ieee80211_tx_h_sequence
);
1505 CALL_TXH(ieee80211_tx_h_fragment
);
1506 /* handlers after fragment must be aware of tx info fragmentation! */
1507 CALL_TXH(ieee80211_tx_h_stats
);
1508 CALL_TXH(ieee80211_tx_h_encrypt
);
1509 if (!ieee80211_hw_check(&tx
->local
->hw
, HAS_RATE_CONTROL
))
1510 CALL_TXH(ieee80211_tx_h_calculate_duration
);
1514 if (unlikely(res
== TX_DROP
)) {
1515 I802_DEBUG_INC(tx
->local
->tx_handlers_drop
);
1517 ieee80211_free_txskb(&tx
->local
->hw
, tx
->skb
);
1519 ieee80211_purge_tx_queue(&tx
->local
->hw
, &tx
->skbs
);
1521 } else if (unlikely(res
== TX_QUEUED
)) {
1522 I802_DEBUG_INC(tx
->local
->tx_handlers_queued
);
1529 bool ieee80211_tx_prepare_skb(struct ieee80211_hw
*hw
,
1530 struct ieee80211_vif
*vif
, struct sk_buff
*skb
,
1531 int band
, struct ieee80211_sta
**sta
)
1533 struct ieee80211_sub_if_data
*sdata
= vif_to_sdata(vif
);
1534 struct ieee80211_tx_info
*info
= IEEE80211_SKB_CB(skb
);
1535 struct ieee80211_tx_data tx
;
1536 struct sk_buff
*skb2
;
1538 if (ieee80211_tx_prepare(sdata
, &tx
, NULL
, skb
) == TX_DROP
)
1542 info
->control
.vif
= vif
;
1543 info
->hw_queue
= vif
->hw_queue
[skb_get_queue_mapping(skb
)];
1545 if (invoke_tx_handlers(&tx
))
1550 *sta
= &tx
.sta
->sta
;
1555 /* this function isn't suitable for fragmented data frames */
1556 skb2
= __skb_dequeue(&tx
.skbs
);
1557 if (WARN_ON(skb2
!= skb
|| !skb_queue_empty(&tx
.skbs
))) {
1558 ieee80211_free_txskb(hw
, skb2
);
1559 ieee80211_purge_tx_queue(hw
, &tx
.skbs
);
1565 EXPORT_SYMBOL(ieee80211_tx_prepare_skb
);
1568 * Returns false if the frame couldn't be transmitted but was queued instead.
1570 static bool ieee80211_tx(struct ieee80211_sub_if_data
*sdata
,
1571 struct sta_info
*sta
, struct sk_buff
*skb
,
1574 struct ieee80211_local
*local
= sdata
->local
;
1575 struct ieee80211_tx_data tx
;
1576 ieee80211_tx_result res_prepare
;
1577 struct ieee80211_tx_info
*info
= IEEE80211_SKB_CB(skb
);
1581 if (unlikely(skb
->len
< 10)) {
1586 /* initialises tx */
1588 res_prepare
= ieee80211_tx_prepare(sdata
, &tx
, sta
, skb
);
1590 if (unlikely(res_prepare
== TX_DROP
)) {
1591 ieee80211_free_txskb(&local
->hw
, skb
);
1593 } else if (unlikely(res_prepare
== TX_QUEUED
)) {
1597 /* set up hw_queue value early */
1598 if (!(info
->flags
& IEEE80211_TX_CTL_TX_OFFCHAN
) ||
1599 !ieee80211_hw_check(&local
->hw
, QUEUE_CONTROL
))
1601 sdata
->vif
.hw_queue
[skb_get_queue_mapping(skb
)];
1603 if (!invoke_tx_handlers(&tx
))
1604 result
= __ieee80211_tx(local
, &tx
.skbs
, led_len
,
1610 /* device xmit handlers */
1612 static int ieee80211_skb_resize(struct ieee80211_sub_if_data
*sdata
,
1613 struct sk_buff
*skb
,
1614 int head_need
, bool may_encrypt
)
1616 struct ieee80211_local
*local
= sdata
->local
;
1619 if (may_encrypt
&& sdata
->crypto_tx_tailroom_needed_cnt
) {
1620 tail_need
= IEEE80211_ENCRYPT_TAILROOM
;
1621 tail_need
-= skb_tailroom(skb
);
1622 tail_need
= max_t(int, tail_need
, 0);
1625 if (skb_cloned(skb
) &&
1626 (!ieee80211_hw_check(&local
->hw
, SUPPORTS_CLONED_SKBS
) ||
1627 !skb_clone_writable(skb
, ETH_HLEN
) ||
1628 (may_encrypt
&& sdata
->crypto_tx_tailroom_needed_cnt
)))
1629 I802_DEBUG_INC(local
->tx_expand_skb_head_cloned
);
1630 else if (head_need
|| tail_need
)
1631 I802_DEBUG_INC(local
->tx_expand_skb_head
);
1635 if (pskb_expand_head(skb
, head_need
, tail_need
, GFP_ATOMIC
)) {
1636 wiphy_debug(local
->hw
.wiphy
,
1637 "failed to reallocate TX buffer\n");
1644 void ieee80211_xmit(struct ieee80211_sub_if_data
*sdata
,
1645 struct sta_info
*sta
, struct sk_buff
*skb
)
1647 struct ieee80211_local
*local
= sdata
->local
;
1648 struct ieee80211_tx_info
*info
= IEEE80211_SKB_CB(skb
);
1649 struct ieee80211_hdr
*hdr
= (struct ieee80211_hdr
*) skb
->data
;
1653 may_encrypt
= !(info
->flags
& IEEE80211_TX_INTFL_DONT_ENCRYPT
);
1655 headroom
= local
->tx_headroom
;
1657 headroom
+= sdata
->encrypt_headroom
;
1658 headroom
-= skb_headroom(skb
);
1659 headroom
= max_t(int, 0, headroom
);
1661 if (ieee80211_skb_resize(sdata
, skb
, headroom
, may_encrypt
)) {
1662 ieee80211_free_txskb(&local
->hw
, skb
);
1666 hdr
= (struct ieee80211_hdr
*) skb
->data
;
1667 info
->control
.vif
= &sdata
->vif
;
1669 if (ieee80211_vif_is_mesh(&sdata
->vif
)) {
1670 if (ieee80211_is_data(hdr
->frame_control
) &&
1671 is_unicast_ether_addr(hdr
->addr1
)) {
1672 if (mesh_nexthop_resolve(sdata
, skb
))
1673 return; /* skb queued: don't free */
1675 ieee80211_mps_set_frame_flags(sdata
, NULL
, hdr
);
1679 ieee80211_set_qos_hdr(sdata
, skb
);
1680 ieee80211_tx(sdata
, sta
, skb
, false);
1683 static bool ieee80211_parse_tx_radiotap(struct ieee80211_local
*local
,
1684 struct sk_buff
*skb
)
1686 struct ieee80211_radiotap_iterator iterator
;
1687 struct ieee80211_radiotap_header
*rthdr
=
1688 (struct ieee80211_radiotap_header
*) skb
->data
;
1689 struct ieee80211_tx_info
*info
= IEEE80211_SKB_CB(skb
);
1690 struct ieee80211_supported_band
*sband
=
1691 local
->hw
.wiphy
->bands
[info
->band
];
1692 int ret
= ieee80211_radiotap_iterator_init(&iterator
, rthdr
, skb
->len
,
1696 bool rate_found
= false;
1697 u8 rate_retries
= 0;
1699 u8 mcs_known
, mcs_flags
;
1702 info
->flags
|= IEEE80211_TX_INTFL_DONT_ENCRYPT
|
1703 IEEE80211_TX_CTL_DONTFRAG
;
1706 * for every radiotap entry that is present
1707 * (ieee80211_radiotap_iterator_next returns -ENOENT when no more
1708 * entries present, or -EINVAL on error)
1712 ret
= ieee80211_radiotap_iterator_next(&iterator
);
1717 /* see if this argument is something we can use */
1718 switch (iterator
.this_arg_index
) {
1720 * You must take care when dereferencing iterator.this_arg
1721 * for multibyte types... the pointer is not aligned. Use
1722 * get_unaligned((type *)iterator.this_arg) to dereference
1723 * iterator.this_arg for type "type" safely on all arches.
1725 case IEEE80211_RADIOTAP_FLAGS
:
1726 if (*iterator
.this_arg
& IEEE80211_RADIOTAP_F_FCS
) {
1728 * this indicates that the skb we have been
1729 * handed has the 32-bit FCS CRC at the end...
1730 * we should react to that by snipping it off
1731 * because it will be recomputed and added
1734 if (skb
->len
< (iterator
._max_length
+ FCS_LEN
))
1737 skb_trim(skb
, skb
->len
- FCS_LEN
);
1739 if (*iterator
.this_arg
& IEEE80211_RADIOTAP_F_WEP
)
1740 info
->flags
&= ~IEEE80211_TX_INTFL_DONT_ENCRYPT
;
1741 if (*iterator
.this_arg
& IEEE80211_RADIOTAP_F_FRAG
)
1742 info
->flags
&= ~IEEE80211_TX_CTL_DONTFRAG
;
1745 case IEEE80211_RADIOTAP_TX_FLAGS
:
1746 txflags
= get_unaligned_le16(iterator
.this_arg
);
1747 if (txflags
& IEEE80211_RADIOTAP_F_TX_NOACK
)
1748 info
->flags
|= IEEE80211_TX_CTL_NO_ACK
;
1751 case IEEE80211_RADIOTAP_RATE
:
1752 rate
= *iterator
.this_arg
;
1757 case IEEE80211_RADIOTAP_DATA_RETRIES
:
1758 rate_retries
= *iterator
.this_arg
;
1761 case IEEE80211_RADIOTAP_MCS
:
1762 mcs_known
= iterator
.this_arg
[0];
1763 mcs_flags
= iterator
.this_arg
[1];
1764 if (!(mcs_known
& IEEE80211_RADIOTAP_MCS_HAVE_MCS
))
1768 rate
= iterator
.this_arg
[2];
1769 rate_flags
= IEEE80211_TX_RC_MCS
;
1771 if (mcs_known
& IEEE80211_RADIOTAP_MCS_HAVE_GI
&&
1772 mcs_flags
& IEEE80211_RADIOTAP_MCS_SGI
)
1773 rate_flags
|= IEEE80211_TX_RC_SHORT_GI
;
1775 if (mcs_known
& IEEE80211_RADIOTAP_MCS_HAVE_BW
&&
1776 mcs_flags
& IEEE80211_RADIOTAP_MCS_BW_40
)
1777 rate_flags
|= IEEE80211_TX_RC_40_MHZ_WIDTH
;
1781 * Please update the file
1782 * Documentation/networking/mac80211-injection.txt
1783 * when parsing new fields here.
1791 if (ret
!= -ENOENT
) /* ie, if we didn't simply run out of fields */
1795 info
->control
.flags
|= IEEE80211_TX_CTRL_RATE_INJECT
;
1797 for (i
= 0; i
< IEEE80211_TX_MAX_RATES
; i
++) {
1798 info
->control
.rates
[i
].idx
= -1;
1799 info
->control
.rates
[i
].flags
= 0;
1800 info
->control
.rates
[i
].count
= 0;
1803 if (rate_flags
& IEEE80211_TX_RC_MCS
) {
1804 info
->control
.rates
[0].idx
= rate
;
1806 for (i
= 0; i
< sband
->n_bitrates
; i
++) {
1807 if (rate
* 5 != sband
->bitrates
[i
].bitrate
)
1810 info
->control
.rates
[0].idx
= i
;
1815 info
->control
.rates
[0].flags
= rate_flags
;
1816 info
->control
.rates
[0].count
= min_t(u8
, rate_retries
+ 1,
1817 local
->hw
.max_rate_tries
);
1821 * remove the radiotap header
1822 * iterator->_max_length was sanity-checked against
1823 * skb->len by iterator init
1825 skb_pull(skb
, iterator
._max_length
);
1830 netdev_tx_t
ieee80211_monitor_start_xmit(struct sk_buff
*skb
,
1831 struct net_device
*dev
)
1833 struct ieee80211_local
*local
= wdev_priv(dev
->ieee80211_ptr
);
1834 struct ieee80211_chanctx_conf
*chanctx_conf
;
1835 struct ieee80211_radiotap_header
*prthdr
=
1836 (struct ieee80211_radiotap_header
*)skb
->data
;
1837 struct ieee80211_tx_info
*info
= IEEE80211_SKB_CB(skb
);
1838 struct ieee80211_hdr
*hdr
;
1839 struct ieee80211_sub_if_data
*tmp_sdata
, *sdata
;
1840 struct cfg80211_chan_def
*chandef
;
1844 /* check for not even having the fixed radiotap header part */
1845 if (unlikely(skb
->len
< sizeof(struct ieee80211_radiotap_header
)))
1846 goto fail
; /* too short to be possibly valid */
1848 /* is it a header version we can trust to find length from? */
1849 if (unlikely(prthdr
->it_version
))
1850 goto fail
; /* only version 0 is supported */
1852 /* then there must be a radiotap header with a length we can use */
1853 len_rthdr
= ieee80211_get_radiotap_len(skb
->data
);
1855 /* does the skb contain enough to deliver on the alleged length? */
1856 if (unlikely(skb
->len
< len_rthdr
))
1857 goto fail
; /* skb too short for claimed rt header extent */
1860 * fix up the pointers accounting for the radiotap
1861 * header still being in there. We are being given
1862 * a precooked IEEE80211 header so no need for
1865 skb_set_mac_header(skb
, len_rthdr
);
1867 * these are just fixed to the end of the rt area since we
1868 * don't have any better information and at this point, nobody cares
1870 skb_set_network_header(skb
, len_rthdr
);
1871 skb_set_transport_header(skb
, len_rthdr
);
1873 if (skb
->len
< len_rthdr
+ 2)
1876 hdr
= (struct ieee80211_hdr
*)(skb
->data
+ len_rthdr
);
1877 hdrlen
= ieee80211_hdrlen(hdr
->frame_control
);
1879 if (skb
->len
< len_rthdr
+ hdrlen
)
1883 * Initialize skb->protocol if the injected frame is a data frame
1884 * carrying a rfc1042 header
1886 if (ieee80211_is_data(hdr
->frame_control
) &&
1887 skb
->len
>= len_rthdr
+ hdrlen
+ sizeof(rfc1042_header
) + 2) {
1888 u8
*payload
= (u8
*)hdr
+ hdrlen
;
1890 if (ether_addr_equal(payload
, rfc1042_header
))
1891 skb
->protocol
= cpu_to_be16((payload
[6] << 8) |
1895 memset(info
, 0, sizeof(*info
));
1897 info
->flags
= IEEE80211_TX_CTL_REQ_TX_STATUS
|
1898 IEEE80211_TX_CTL_INJECTED
;
1903 * We process outgoing injected frames that have a local address
1904 * we handle as though they are non-injected frames.
1905 * This code here isn't entirely correct, the local MAC address
1906 * isn't always enough to find the interface to use; for proper
1907 * VLAN/WDS support we will need a different mechanism (which
1908 * likely isn't going to be monitor interfaces).
1910 sdata
= IEEE80211_DEV_TO_SUB_IF(dev
);
1912 list_for_each_entry_rcu(tmp_sdata
, &local
->interfaces
, list
) {
1913 if (!ieee80211_sdata_running(tmp_sdata
))
1915 if (tmp_sdata
->vif
.type
== NL80211_IFTYPE_MONITOR
||
1916 tmp_sdata
->vif
.type
== NL80211_IFTYPE_AP_VLAN
||
1917 tmp_sdata
->vif
.type
== NL80211_IFTYPE_WDS
)
1919 if (ether_addr_equal(tmp_sdata
->vif
.addr
, hdr
->addr2
)) {
1925 chanctx_conf
= rcu_dereference(sdata
->vif
.chanctx_conf
);
1926 if (!chanctx_conf
) {
1927 tmp_sdata
= rcu_dereference(local
->monitor_sdata
);
1930 rcu_dereference(tmp_sdata
->vif
.chanctx_conf
);
1934 chandef
= &chanctx_conf
->def
;
1935 else if (!local
->use_chanctx
)
1936 chandef
= &local
->_oper_chandef
;
1941 * Frame injection is not allowed if beaconing is not allowed
1942 * or if we need radar detection. Beaconing is usually not allowed when
1943 * the mode or operation (Adhoc, AP, Mesh) does not support DFS.
1944 * Passive scan is also used in world regulatory domains where
1945 * your country is not known and as such it should be treated as
1946 * NO TX unless the channel is explicitly allowed in which case
1947 * your current regulatory domain would not have the passive scan
1950 * Since AP mode uses monitor interfaces to inject/TX management
1951 * frames we can make AP mode the exception to this rule once it
1952 * supports radar detection as its implementation can deal with
1953 * radar detection by itself. We can do that later by adding a
1954 * monitor flag interfaces used for AP support.
1956 if (!cfg80211_reg_can_beacon(local
->hw
.wiphy
, chandef
,
1960 info
->band
= chandef
->chan
->band
;
1962 /* process and remove the injection radiotap header */
1963 if (!ieee80211_parse_tx_radiotap(local
, skb
))
1966 ieee80211_xmit(sdata
, NULL
, skb
);
1969 return NETDEV_TX_OK
;
1975 return NETDEV_TX_OK
; /* meaning, we dealt with the skb */
1978 static inline bool ieee80211_is_tdls_setup(struct sk_buff
*skb
)
1980 u16 ethertype
= (skb
->data
[12] << 8) | skb
->data
[13];
1982 return ethertype
== ETH_P_TDLS
&&
1984 skb
->data
[14] == WLAN_TDLS_SNAP_RFTYPE
;
1987 static int ieee80211_lookup_ra_sta(struct ieee80211_sub_if_data
*sdata
,
1988 struct sk_buff
*skb
,
1989 struct sta_info
**sta_out
)
1991 struct sta_info
*sta
;
1993 switch (sdata
->vif
.type
) {
1994 case NL80211_IFTYPE_AP_VLAN
:
1995 sta
= rcu_dereference(sdata
->u
.vlan
.sta
);
1999 } else if (sdata
->wdev
.use_4addr
) {
2003 case NL80211_IFTYPE_AP
:
2004 case NL80211_IFTYPE_OCB
:
2005 case NL80211_IFTYPE_ADHOC
:
2006 if (is_multicast_ether_addr(skb
->data
)) {
2007 *sta_out
= ERR_PTR(-ENOENT
);
2010 sta
= sta_info_get_bss(sdata
, skb
->data
);
2012 case NL80211_IFTYPE_WDS
:
2013 sta
= sta_info_get(sdata
, sdata
->u
.wds
.remote_addr
);
2015 #ifdef CONFIG_MAC80211_MESH
2016 case NL80211_IFTYPE_MESH_POINT
:
2017 /* determined much later */
2021 case NL80211_IFTYPE_STATION
:
2022 if (sdata
->wdev
.wiphy
->flags
& WIPHY_FLAG_SUPPORTS_TDLS
) {
2023 sta
= sta_info_get(sdata
, skb
->data
);
2025 bool tdls_peer
, tdls_auth
;
2027 tdls_peer
= test_sta_flag(sta
,
2028 WLAN_STA_TDLS_PEER
);
2029 tdls_auth
= test_sta_flag(sta
,
2030 WLAN_STA_TDLS_PEER_AUTH
);
2032 if (tdls_peer
&& tdls_auth
) {
2038 * TDLS link during setup - throw out frames to
2039 * peer. Allow TDLS-setup frames to unauthorized
2040 * peers for the special case of a link teardown
2041 * after a TDLS sta is removed due to being
2044 if (tdls_peer
&& !tdls_auth
&&
2045 !ieee80211_is_tdls_setup(skb
))
2051 sta
= sta_info_get(sdata
, sdata
->u
.mgd
.bssid
);
2059 *sta_out
= sta
?: ERR_PTR(-ENOENT
);
2064 * ieee80211_build_hdr - build 802.11 header in the given frame
2065 * @sdata: virtual interface to build the header for
2066 * @skb: the skb to build the header in
2067 * @info_flags: skb flags to set
2069 * This function takes the skb with 802.3 header and reformats the header to
2070 * the appropriate IEEE 802.11 header based on which interface the packet is
2071 * being transmitted on.
2073 * Note that this function also takes care of the TX status request and
2074 * potential unsharing of the SKB - this needs to be interleaved with the
2077 * The function requires the read-side RCU lock held
2079 * Returns: the (possibly reallocated) skb or an ERR_PTR() code
2081 static struct sk_buff
*ieee80211_build_hdr(struct ieee80211_sub_if_data
*sdata
,
2082 struct sk_buff
*skb
, u32 info_flags
,
2083 struct sta_info
*sta
)
2085 struct ieee80211_local
*local
= sdata
->local
;
2086 struct ieee80211_tx_info
*info
;
2088 u16 ethertype
, hdrlen
, meshhdrlen
= 0;
2090 struct ieee80211_hdr hdr
;
2091 struct ieee80211s_hdr mesh_hdr __maybe_unused
;
2092 struct mesh_path __maybe_unused
*mppath
= NULL
, *mpath
= NULL
;
2093 const u8
*encaps_data
;
2094 int encaps_len
, skip_header_bytes
;
2096 bool wme_sta
= false, authorized
= false;
2100 struct ieee80211_chanctx_conf
*chanctx_conf
;
2101 struct ieee80211_sub_if_data
*ap_sdata
;
2102 enum ieee80211_band band
;
2108 /* convert Ethernet header to proper 802.11 header (based on
2109 * operation mode) */
2110 ethertype
= (skb
->data
[12] << 8) | skb
->data
[13];
2111 fc
= cpu_to_le16(IEEE80211_FTYPE_DATA
| IEEE80211_STYPE_DATA
);
2113 switch (sdata
->vif
.type
) {
2114 case NL80211_IFTYPE_AP_VLAN
:
2115 if (sdata
->wdev
.use_4addr
) {
2116 fc
|= cpu_to_le16(IEEE80211_FCTL_FROMDS
| IEEE80211_FCTL_TODS
);
2118 memcpy(hdr
.addr1
, sta
->sta
.addr
, ETH_ALEN
);
2119 memcpy(hdr
.addr2
, sdata
->vif
.addr
, ETH_ALEN
);
2120 memcpy(hdr
.addr3
, skb
->data
, ETH_ALEN
);
2121 memcpy(hdr
.addr4
, skb
->data
+ ETH_ALEN
, ETH_ALEN
);
2123 authorized
= test_sta_flag(sta
, WLAN_STA_AUTHORIZED
);
2124 wme_sta
= sta
->sta
.wme
;
2126 ap_sdata
= container_of(sdata
->bss
, struct ieee80211_sub_if_data
,
2128 chanctx_conf
= rcu_dereference(ap_sdata
->vif
.chanctx_conf
);
2129 if (!chanctx_conf
) {
2133 band
= chanctx_conf
->def
.chan
->band
;
2134 if (sdata
->wdev
.use_4addr
)
2137 case NL80211_IFTYPE_AP
:
2138 if (sdata
->vif
.type
== NL80211_IFTYPE_AP
)
2139 chanctx_conf
= rcu_dereference(sdata
->vif
.chanctx_conf
);
2140 if (!chanctx_conf
) {
2144 fc
|= cpu_to_le16(IEEE80211_FCTL_FROMDS
);
2146 memcpy(hdr
.addr1
, skb
->data
, ETH_ALEN
);
2147 memcpy(hdr
.addr2
, sdata
->vif
.addr
, ETH_ALEN
);
2148 memcpy(hdr
.addr3
, skb
->data
+ ETH_ALEN
, ETH_ALEN
);
2150 band
= chanctx_conf
->def
.chan
->band
;
2152 case NL80211_IFTYPE_WDS
:
2153 fc
|= cpu_to_le16(IEEE80211_FCTL_FROMDS
| IEEE80211_FCTL_TODS
);
2155 memcpy(hdr
.addr1
, sdata
->u
.wds
.remote_addr
, ETH_ALEN
);
2156 memcpy(hdr
.addr2
, sdata
->vif
.addr
, ETH_ALEN
);
2157 memcpy(hdr
.addr3
, skb
->data
, ETH_ALEN
);
2158 memcpy(hdr
.addr4
, skb
->data
+ ETH_ALEN
, ETH_ALEN
);
2161 * This is the exception! WDS style interfaces are prohibited
2162 * when channel contexts are in used so this must be valid
2164 band
= local
->hw
.conf
.chandef
.chan
->band
;
2166 #ifdef CONFIG_MAC80211_MESH
2167 case NL80211_IFTYPE_MESH_POINT
:
2168 if (!is_multicast_ether_addr(skb
->data
)) {
2169 struct sta_info
*next_hop
;
2170 bool mpp_lookup
= true;
2172 mpath
= mesh_path_lookup(sdata
, skb
->data
);
2175 next_hop
= rcu_dereference(mpath
->next_hop
);
2177 !(mpath
->flags
& (MESH_PATH_ACTIVE
|
2178 MESH_PATH_RESOLVING
)))
2183 mppath
= mpp_path_lookup(sdata
, skb
->data
);
2185 mppath
->exp_time
= jiffies
;
2188 if (mppath
&& mpath
)
2189 mesh_path_del(mpath
->sdata
, mpath
->dst
);
2193 * Use address extension if it is a packet from
2194 * another interface or if we know the destination
2195 * is being proxied by a portal (i.e. portal address
2196 * differs from proxied address)
2198 if (ether_addr_equal(sdata
->vif
.addr
, skb
->data
+ ETH_ALEN
) &&
2199 !(mppath
&& !ether_addr_equal(mppath
->mpp
, skb
->data
))) {
2200 hdrlen
= ieee80211_fill_mesh_addresses(&hdr
, &fc
,
2201 skb
->data
, skb
->data
+ ETH_ALEN
);
2202 meshhdrlen
= ieee80211_new_mesh_header(sdata
, &mesh_hdr
,
2205 /* DS -> MBSS (802.11-2012 13.11.3.3).
2206 * For unicast with unknown forwarding information,
2207 * destination might be in the MBSS or if that fails
2208 * forwarded to another mesh gate. In either case
2209 * resolution will be handled in ieee80211_xmit(), so
2210 * leave the original DA. This also works for mcast */
2211 const u8
*mesh_da
= skb
->data
;
2214 mesh_da
= mppath
->mpp
;
2216 mesh_da
= mpath
->dst
;
2218 hdrlen
= ieee80211_fill_mesh_addresses(&hdr
, &fc
,
2219 mesh_da
, sdata
->vif
.addr
);
2220 if (is_multicast_ether_addr(mesh_da
))
2221 /* DA TA mSA AE:SA */
2222 meshhdrlen
= ieee80211_new_mesh_header(
2224 skb
->data
+ ETH_ALEN
, NULL
);
2226 /* RA TA mDA mSA AE:DA SA */
2227 meshhdrlen
= ieee80211_new_mesh_header(
2228 sdata
, &mesh_hdr
, skb
->data
,
2229 skb
->data
+ ETH_ALEN
);
2232 chanctx_conf
= rcu_dereference(sdata
->vif
.chanctx_conf
);
2233 if (!chanctx_conf
) {
2237 band
= chanctx_conf
->def
.chan
->band
;
2240 case NL80211_IFTYPE_STATION
:
2241 /* we already did checks when looking up the RA STA */
2242 tdls_peer
= test_sta_flag(sta
, WLAN_STA_TDLS_PEER
);
2246 memcpy(hdr
.addr1
, skb
->data
, ETH_ALEN
);
2247 memcpy(hdr
.addr2
, skb
->data
+ ETH_ALEN
, ETH_ALEN
);
2248 memcpy(hdr
.addr3
, sdata
->u
.mgd
.bssid
, ETH_ALEN
);
2250 } else if (sdata
->u
.mgd
.use_4addr
&&
2251 cpu_to_be16(ethertype
) != sdata
->control_port_protocol
) {
2252 fc
|= cpu_to_le16(IEEE80211_FCTL_FROMDS
|
2253 IEEE80211_FCTL_TODS
);
2255 memcpy(hdr
.addr1
, sdata
->u
.mgd
.bssid
, ETH_ALEN
);
2256 memcpy(hdr
.addr2
, sdata
->vif
.addr
, ETH_ALEN
);
2257 memcpy(hdr
.addr3
, skb
->data
, ETH_ALEN
);
2258 memcpy(hdr
.addr4
, skb
->data
+ ETH_ALEN
, ETH_ALEN
);
2261 fc
|= cpu_to_le16(IEEE80211_FCTL_TODS
);
2263 memcpy(hdr
.addr1
, sdata
->u
.mgd
.bssid
, ETH_ALEN
);
2264 memcpy(hdr
.addr2
, skb
->data
+ ETH_ALEN
, ETH_ALEN
);
2265 memcpy(hdr
.addr3
, skb
->data
, ETH_ALEN
);
2268 chanctx_conf
= rcu_dereference(sdata
->vif
.chanctx_conf
);
2269 if (!chanctx_conf
) {
2273 band
= chanctx_conf
->def
.chan
->band
;
2275 case NL80211_IFTYPE_OCB
:
2277 memcpy(hdr
.addr1
, skb
->data
, ETH_ALEN
);
2278 memcpy(hdr
.addr2
, skb
->data
+ ETH_ALEN
, ETH_ALEN
);
2279 eth_broadcast_addr(hdr
.addr3
);
2281 chanctx_conf
= rcu_dereference(sdata
->vif
.chanctx_conf
);
2282 if (!chanctx_conf
) {
2286 band
= chanctx_conf
->def
.chan
->band
;
2288 case NL80211_IFTYPE_ADHOC
:
2290 memcpy(hdr
.addr1
, skb
->data
, ETH_ALEN
);
2291 memcpy(hdr
.addr2
, skb
->data
+ ETH_ALEN
, ETH_ALEN
);
2292 memcpy(hdr
.addr3
, sdata
->u
.ibss
.bssid
, ETH_ALEN
);
2294 chanctx_conf
= rcu_dereference(sdata
->vif
.chanctx_conf
);
2295 if (!chanctx_conf
) {
2299 band
= chanctx_conf
->def
.chan
->band
;
2306 multicast
= is_multicast_ether_addr(hdr
.addr1
);
2308 /* sta is always NULL for mesh */
2310 authorized
= test_sta_flag(sta
, WLAN_STA_AUTHORIZED
);
2311 wme_sta
= sta
->sta
.wme
;
2312 } else if (ieee80211_vif_is_mesh(&sdata
->vif
)) {
2313 /* For mesh, the use of the QoS header is mandatory */
2317 /* receiver does QoS (which also means we do) use it */
2319 fc
|= cpu_to_le16(IEEE80211_STYPE_QOS_DATA
);
2324 * Drop unicast frames to unauthorised stations unless they are
2325 * EAPOL frames from the local station.
2327 if (unlikely(!ieee80211_vif_is_mesh(&sdata
->vif
) &&
2328 (sdata
->vif
.type
!= NL80211_IFTYPE_OCB
) &&
2329 !multicast
&& !authorized
&&
2330 (cpu_to_be16(ethertype
) != sdata
->control_port_protocol
||
2331 !ether_addr_equal(sdata
->vif
.addr
, skb
->data
+ ETH_ALEN
)))) {
2332 #ifdef CONFIG_MAC80211_VERBOSE_DEBUG
2333 net_info_ratelimited("%s: dropped frame to %pM (unauthorized port)\n",
2334 sdata
->name
, hdr
.addr1
);
2337 I802_DEBUG_INC(local
->tx_handlers_drop_unauth_port
);
2343 if (unlikely(!multicast
&& skb
->sk
&&
2344 skb_shinfo(skb
)->tx_flags
& SKBTX_WIFI_STATUS
)) {
2345 struct sk_buff
*ack_skb
= skb_clone_sk(skb
);
2348 unsigned long flags
;
2351 spin_lock_irqsave(&local
->ack_status_lock
, flags
);
2352 id
= idr_alloc(&local
->ack_status_frames
, ack_skb
,
2353 1, 0x10000, GFP_ATOMIC
);
2354 spin_unlock_irqrestore(&local
->ack_status_lock
, flags
);
2358 info_flags
|= IEEE80211_TX_CTL_REQ_TX_STATUS
;
2366 * If the skb is shared we need to obtain our own copy.
2368 if (skb_shared(skb
)) {
2369 struct sk_buff
*tmp_skb
= skb
;
2371 /* can't happen -- skb is a clone if info_id != 0 */
2374 skb
= skb_clone(skb
, GFP_ATOMIC
);
2383 hdr
.frame_control
= fc
;
2384 hdr
.duration_id
= 0;
2387 skip_header_bytes
= ETH_HLEN
;
2388 if (ethertype
== ETH_P_AARP
|| ethertype
== ETH_P_IPX
) {
2389 encaps_data
= bridge_tunnel_header
;
2390 encaps_len
= sizeof(bridge_tunnel_header
);
2391 skip_header_bytes
-= 2;
2392 } else if (ethertype
>= ETH_P_802_3_MIN
) {
2393 encaps_data
= rfc1042_header
;
2394 encaps_len
= sizeof(rfc1042_header
);
2395 skip_header_bytes
-= 2;
2401 nh_pos
= skb_network_header(skb
) - skb
->data
;
2402 h_pos
= skb_transport_header(skb
) - skb
->data
;
2404 skb_pull(skb
, skip_header_bytes
);
2405 nh_pos
-= skip_header_bytes
;
2406 h_pos
-= skip_header_bytes
;
2408 head_need
= hdrlen
+ encaps_len
+ meshhdrlen
- skb_headroom(skb
);
2411 * So we need to modify the skb header and hence need a copy of
2412 * that. The head_need variable above doesn't, so far, include
2413 * the needed header space that we don't need right away. If we
2414 * can, then we don't reallocate right now but only after the
2415 * frame arrives at the master device (if it does...)
2417 * If we cannot, however, then we will reallocate to include all
2418 * the ever needed space. Also, if we need to reallocate it anyway,
2419 * make it big enough for everything we may ever need.
2422 if (head_need
> 0 || skb_cloned(skb
)) {
2423 head_need
+= sdata
->encrypt_headroom
;
2424 head_need
+= local
->tx_headroom
;
2425 head_need
= max_t(int, 0, head_need
);
2426 if (ieee80211_skb_resize(sdata
, skb
, head_need
, true)) {
2427 ieee80211_free_txskb(&local
->hw
, skb
);
2429 return ERR_PTR(-ENOMEM
);
2434 memcpy(skb_push(skb
, encaps_len
), encaps_data
, encaps_len
);
2435 nh_pos
+= encaps_len
;
2436 h_pos
+= encaps_len
;
2439 #ifdef CONFIG_MAC80211_MESH
2440 if (meshhdrlen
> 0) {
2441 memcpy(skb_push(skb
, meshhdrlen
), &mesh_hdr
, meshhdrlen
);
2442 nh_pos
+= meshhdrlen
;
2443 h_pos
+= meshhdrlen
;
2447 if (ieee80211_is_data_qos(fc
)) {
2448 __le16
*qos_control
;
2450 qos_control
= (__le16
*) skb_push(skb
, 2);
2451 memcpy(skb_push(skb
, hdrlen
- 2), &hdr
, hdrlen
- 2);
2453 * Maybe we could actually set some fields here, for now just
2454 * initialise to zero to indicate no special operation.
2458 memcpy(skb_push(skb
, hdrlen
), &hdr
, hdrlen
);
2463 /* Update skb pointers to various headers since this modified frame
2464 * is going to go through Linux networking code that may potentially
2465 * need things like pointer to IP header. */
2466 skb_reset_mac_header(skb
);
2467 skb_set_network_header(skb
, nh_pos
);
2468 skb_set_transport_header(skb
, h_pos
);
2470 info
= IEEE80211_SKB_CB(skb
);
2471 memset(info
, 0, sizeof(*info
));
2473 info
->flags
= info_flags
;
2474 info
->ack_frame_id
= info_id
;
2480 return ERR_PTR(ret
);
2484 * fast-xmit overview
2486 * The core idea of this fast-xmit is to remove per-packet checks by checking
2487 * them out of band. ieee80211_check_fast_xmit() implements the out-of-band
2488 * checks that are needed to get the sta->fast_tx pointer assigned, after which
2489 * much less work can be done per packet. For example, fragmentation must be
2490 * disabled or the fast_tx pointer will not be set. All the conditions are seen
2493 * Once assigned, the fast_tx data structure also caches the per-packet 802.11
2494 * header and other data to aid packet processing in ieee80211_xmit_fast().
2496 * The most difficult part of this is that when any of these assumptions
2497 * change, an external trigger (i.e. a call to ieee80211_clear_fast_xmit(),
2498 * ieee80211_check_fast_xmit() or friends) is required to reset the data,
2499 * since the per-packet code no longer checks the conditions. This is reflected
2500 * by the calls to these functions throughout the rest of the code, and must be
2501 * maintained if any of the TX path checks change.
2504 void ieee80211_check_fast_xmit(struct sta_info
*sta
)
2506 struct ieee80211_fast_tx build
= {}, *fast_tx
= NULL
, *old
;
2507 struct ieee80211_local
*local
= sta
->local
;
2508 struct ieee80211_sub_if_data
*sdata
= sta
->sdata
;
2509 struct ieee80211_hdr
*hdr
= (void *)build
.hdr
;
2510 struct ieee80211_chanctx_conf
*chanctx_conf
;
2513 if (!ieee80211_hw_check(&local
->hw
, SUPPORT_FAST_XMIT
))
2516 /* Locking here protects both the pointer itself, and against concurrent
2517 * invocations winning data access races to, e.g., the key pointer that
2519 * Without it, the invocation of this function right after the key
2520 * pointer changes wouldn't be sufficient, as another CPU could access
2521 * the pointer, then stall, and then do the cache update after the CPU
2522 * that invalidated the key.
2523 * With the locking, such scenarios cannot happen as the check for the
2524 * key and the fast-tx assignment are done atomically, so the CPU that
2525 * modifies the key will either wait or other one will see the key
2526 * cleared/changed already.
2528 spin_lock_bh(&sta
->lock
);
2529 if (ieee80211_hw_check(&local
->hw
, SUPPORTS_PS
) &&
2530 !ieee80211_hw_check(&local
->hw
, SUPPORTS_DYNAMIC_PS
) &&
2531 sdata
->vif
.type
== NL80211_IFTYPE_STATION
)
2534 if (!test_sta_flag(sta
, WLAN_STA_AUTHORIZED
))
2537 if (test_sta_flag(sta
, WLAN_STA_PS_STA
) ||
2538 test_sta_flag(sta
, WLAN_STA_PS_DRIVER
) ||
2539 test_sta_flag(sta
, WLAN_STA_PS_DELIVER
) ||
2540 test_sta_flag(sta
, WLAN_STA_CLEAR_PS_FILT
))
2543 if (sdata
->noack_map
)
2546 /* fast-xmit doesn't handle fragmentation at all */
2547 if (local
->hw
.wiphy
->frag_threshold
!= (u32
)-1 &&
2548 !local
->ops
->set_frag_threshold
)
2552 chanctx_conf
= rcu_dereference(sdata
->vif
.chanctx_conf
);
2553 if (!chanctx_conf
) {
2557 build
.band
= chanctx_conf
->def
.chan
->band
;
2560 fc
= cpu_to_le16(IEEE80211_FTYPE_DATA
| IEEE80211_STYPE_DATA
);
2562 switch (sdata
->vif
.type
) {
2563 case NL80211_IFTYPE_ADHOC
:
2565 build
.da_offs
= offsetof(struct ieee80211_hdr
, addr1
);
2566 build
.sa_offs
= offsetof(struct ieee80211_hdr
, addr2
);
2567 memcpy(hdr
->addr3
, sdata
->u
.ibss
.bssid
, ETH_ALEN
);
2570 case NL80211_IFTYPE_STATION
:
2571 if (test_sta_flag(sta
, WLAN_STA_TDLS_PEER
)) {
2573 build
.da_offs
= offsetof(struct ieee80211_hdr
, addr1
);
2574 build
.sa_offs
= offsetof(struct ieee80211_hdr
, addr2
);
2575 memcpy(hdr
->addr3
, sdata
->u
.mgd
.bssid
, ETH_ALEN
);
2580 if (sdata
->u
.mgd
.use_4addr
) {
2581 /* non-regular ethertype cannot use the fastpath */
2582 fc
|= cpu_to_le16(IEEE80211_FCTL_FROMDS
|
2583 IEEE80211_FCTL_TODS
);
2585 memcpy(hdr
->addr1
, sdata
->u
.mgd
.bssid
, ETH_ALEN
);
2586 memcpy(hdr
->addr2
, sdata
->vif
.addr
, ETH_ALEN
);
2587 build
.da_offs
= offsetof(struct ieee80211_hdr
, addr3
);
2588 build
.sa_offs
= offsetof(struct ieee80211_hdr
, addr4
);
2592 fc
|= cpu_to_le16(IEEE80211_FCTL_TODS
);
2594 memcpy(hdr
->addr1
, sdata
->u
.mgd
.bssid
, ETH_ALEN
);
2595 build
.da_offs
= offsetof(struct ieee80211_hdr
, addr3
);
2596 build
.sa_offs
= offsetof(struct ieee80211_hdr
, addr2
);
2599 case NL80211_IFTYPE_AP_VLAN
:
2600 if (sdata
->wdev
.use_4addr
) {
2601 fc
|= cpu_to_le16(IEEE80211_FCTL_FROMDS
|
2602 IEEE80211_FCTL_TODS
);
2604 memcpy(hdr
->addr1
, sta
->sta
.addr
, ETH_ALEN
);
2605 memcpy(hdr
->addr2
, sdata
->vif
.addr
, ETH_ALEN
);
2606 build
.da_offs
= offsetof(struct ieee80211_hdr
, addr3
);
2607 build
.sa_offs
= offsetof(struct ieee80211_hdr
, addr4
);
2612 case NL80211_IFTYPE_AP
:
2613 fc
|= cpu_to_le16(IEEE80211_FCTL_FROMDS
);
2615 build
.da_offs
= offsetof(struct ieee80211_hdr
, addr1
);
2616 memcpy(hdr
->addr2
, sdata
->vif
.addr
, ETH_ALEN
);
2617 build
.sa_offs
= offsetof(struct ieee80211_hdr
, addr3
);
2621 /* not handled on fast-xmit */
2627 fc
|= cpu_to_le16(IEEE80211_STYPE_QOS_DATA
);
2630 /* We store the key here so there's no point in using rcu_dereference()
2631 * but that's fine because the code that changes the pointers will call
2632 * this function after doing so. For a single CPU that would be enough,
2633 * for multiple see the comment above.
2635 build
.key
= rcu_access_pointer(sta
->ptk
[sta
->ptk_idx
]);
2637 build
.key
= rcu_access_pointer(sdata
->default_unicast_key
);
2639 bool gen_iv
, iv_spc
, mmic
;
2641 gen_iv
= build
.key
->conf
.flags
& IEEE80211_KEY_FLAG_GENERATE_IV
;
2642 iv_spc
= build
.key
->conf
.flags
& IEEE80211_KEY_FLAG_PUT_IV_SPACE
;
2643 mmic
= build
.key
->conf
.flags
& IEEE80211_KEY_FLAG_GENERATE_MMIC
;
2645 /* don't handle software crypto */
2646 if (!(build
.key
->flags
& KEY_FLAG_UPLOADED_TO_HARDWARE
))
2649 switch (build
.key
->conf
.cipher
) {
2650 case WLAN_CIPHER_SUITE_CCMP
:
2651 case WLAN_CIPHER_SUITE_CCMP_256
:
2652 /* add fixed key ID */
2654 (build
.hdr
+ build
.hdr_len
)[3] =
2655 0x20 | (build
.key
->conf
.keyidx
<< 6);
2656 build
.pn_offs
= build
.hdr_len
;
2658 if (gen_iv
|| iv_spc
)
2659 build
.hdr_len
+= IEEE80211_CCMP_HDR_LEN
;
2661 case WLAN_CIPHER_SUITE_GCMP
:
2662 case WLAN_CIPHER_SUITE_GCMP_256
:
2663 /* add fixed key ID */
2665 (build
.hdr
+ build
.hdr_len
)[3] =
2666 0x20 | (build
.key
->conf
.keyidx
<< 6);
2667 build
.pn_offs
= build
.hdr_len
;
2669 if (gen_iv
|| iv_spc
)
2670 build
.hdr_len
+= IEEE80211_GCMP_HDR_LEN
;
2672 case WLAN_CIPHER_SUITE_TKIP
:
2673 /* cannot handle MMIC or IV generation in xmit-fast */
2677 build
.hdr_len
+= IEEE80211_TKIP_IV_LEN
;
2679 case WLAN_CIPHER_SUITE_WEP40
:
2680 case WLAN_CIPHER_SUITE_WEP104
:
2681 /* cannot handle IV generation in fast-xmit */
2685 build
.hdr_len
+= IEEE80211_WEP_IV_LEN
;
2687 case WLAN_CIPHER_SUITE_AES_CMAC
:
2688 case WLAN_CIPHER_SUITE_BIP_CMAC_256
:
2689 case WLAN_CIPHER_SUITE_BIP_GMAC_128
:
2690 case WLAN_CIPHER_SUITE_BIP_GMAC_256
:
2692 "management cipher suite 0x%x enabled for data\n",
2693 build
.key
->conf
.cipher
);
2696 /* we don't know how to generate IVs for this at all */
2697 if (WARN_ON(gen_iv
))
2699 /* pure hardware keys are OK, of course */
2700 if (!(build
.key
->flags
& KEY_FLAG_CIPHER_SCHEME
))
2702 /* cipher scheme might require space allocation */
2704 build
.key
->conf
.iv_len
> IEEE80211_FAST_XMIT_MAX_IV
)
2707 build
.hdr_len
+= build
.key
->conf
.iv_len
;
2710 fc
|= cpu_to_le16(IEEE80211_FCTL_PROTECTED
);
2713 hdr
->frame_control
= fc
;
2715 memcpy(build
.hdr
+ build
.hdr_len
,
2716 rfc1042_header
, sizeof(rfc1042_header
));
2717 build
.hdr_len
+= sizeof(rfc1042_header
);
2719 fast_tx
= kmemdup(&build
, sizeof(build
), GFP_ATOMIC
);
2720 /* if the kmemdup fails, continue w/o fast_tx */
2725 /* we might have raced against another call to this function */
2726 old
= rcu_dereference_protected(sta
->fast_tx
,
2727 lockdep_is_held(&sta
->lock
));
2728 rcu_assign_pointer(sta
->fast_tx
, fast_tx
);
2730 kfree_rcu(old
, rcu_head
);
2731 spin_unlock_bh(&sta
->lock
);
2734 void ieee80211_check_fast_xmit_all(struct ieee80211_local
*local
)
2736 struct sta_info
*sta
;
2739 list_for_each_entry_rcu(sta
, &local
->sta_list
, list
)
2740 ieee80211_check_fast_xmit(sta
);
2744 void ieee80211_check_fast_xmit_iface(struct ieee80211_sub_if_data
*sdata
)
2746 struct ieee80211_local
*local
= sdata
->local
;
2747 struct sta_info
*sta
;
2751 list_for_each_entry_rcu(sta
, &local
->sta_list
, list
) {
2752 if (sdata
!= sta
->sdata
&&
2753 (!sta
->sdata
->bss
|| sta
->sdata
->bss
!= sdata
->bss
))
2755 ieee80211_check_fast_xmit(sta
);
2761 void ieee80211_clear_fast_xmit(struct sta_info
*sta
)
2763 struct ieee80211_fast_tx
*fast_tx
;
2765 spin_lock_bh(&sta
->lock
);
2766 fast_tx
= rcu_dereference_protected(sta
->fast_tx
,
2767 lockdep_is_held(&sta
->lock
));
2768 RCU_INIT_POINTER(sta
->fast_tx
, NULL
);
2769 spin_unlock_bh(&sta
->lock
);
2772 kfree_rcu(fast_tx
, rcu_head
);
2775 static bool ieee80211_xmit_fast(struct ieee80211_sub_if_data
*sdata
,
2776 struct net_device
*dev
, struct sta_info
*sta
,
2777 struct ieee80211_fast_tx
*fast_tx
,
2778 struct sk_buff
*skb
)
2780 struct ieee80211_local
*local
= sdata
->local
;
2781 u16 ethertype
= (skb
->data
[12] << 8) | skb
->data
[13];
2782 int extra_head
= fast_tx
->hdr_len
- (ETH_HLEN
- 2);
2783 int hw_headroom
= sdata
->local
->hw
.extra_tx_headroom
;
2785 struct ieee80211_tx_info
*info
= IEEE80211_SKB_CB(skb
);
2786 struct ieee80211_hdr
*hdr
= (void *)fast_tx
->hdr
;
2787 struct ieee80211_tx_data tx
;
2788 ieee80211_tx_result r
;
2789 struct tid_ampdu_tx
*tid_tx
= NULL
;
2790 u8 tid
= IEEE80211_NUM_TIDS
;
2792 /* control port protocol needs a lot of special handling */
2793 if (cpu_to_be16(ethertype
) == sdata
->control_port_protocol
)
2796 /* only RFC 1042 SNAP */
2797 if (ethertype
< ETH_P_802_3_MIN
)
2800 /* don't handle TX status request here either */
2801 if (skb
->sk
&& skb_shinfo(skb
)->tx_flags
& SKBTX_WIFI_STATUS
)
2804 if (hdr
->frame_control
& cpu_to_le16(IEEE80211_STYPE_QOS_DATA
)) {
2805 tid
= skb
->priority
& IEEE80211_QOS_CTL_TAG1D_MASK
;
2806 tid_tx
= rcu_dereference(sta
->ampdu_mlme
.tid_tx
[tid
]);
2808 if (!test_bit(HT_AGG_STATE_OPERATIONAL
, &tid_tx
->state
))
2810 if (tid_tx
->timeout
)
2811 tid_tx
->last_tx
= jiffies
;
2815 /* after this point (skb is modified) we cannot return false */
2817 if (skb_shared(skb
)) {
2818 struct sk_buff
*tmp_skb
= skb
;
2820 skb
= skb_clone(skb
, GFP_ATOMIC
);
2827 ieee80211_tx_stats(dev
, skb
->len
+ extra_head
);
2829 /* will not be crypto-handled beyond what we do here, so use false
2830 * as the may-encrypt argument for the resize to not account for
2831 * more room than we already have in 'extra_head'
2833 if (unlikely(ieee80211_skb_resize(sdata
, skb
,
2834 max_t(int, extra_head
+ hw_headroom
-
2835 skb_headroom(skb
), 0),
2841 memcpy(ð
, skb
->data
, ETH_HLEN
- 2);
2842 hdr
= (void *)skb_push(skb
, extra_head
);
2843 memcpy(skb
->data
, fast_tx
->hdr
, fast_tx
->hdr_len
);
2844 memcpy(skb
->data
+ fast_tx
->da_offs
, eth
.h_dest
, ETH_ALEN
);
2845 memcpy(skb
->data
+ fast_tx
->sa_offs
, eth
.h_source
, ETH_ALEN
);
2847 memset(info
, 0, sizeof(*info
));
2848 info
->band
= fast_tx
->band
;
2849 info
->control
.vif
= &sdata
->vif
;
2850 info
->flags
= IEEE80211_TX_CTL_FIRST_FRAGMENT
|
2851 IEEE80211_TX_CTL_DONTFRAG
|
2852 (tid_tx
? IEEE80211_TX_CTL_AMPDU
: 0);
2854 if (hdr
->frame_control
& cpu_to_le16(IEEE80211_STYPE_QOS_DATA
)) {
2855 *ieee80211_get_qos_ctl(hdr
) = tid
;
2856 if (!sta
->sta
.txq
[0])
2857 hdr
->seq_ctrl
= ieee80211_tx_next_seq(sta
, tid
);
2859 info
->flags
|= IEEE80211_TX_CTL_ASSIGN_SEQ
;
2860 hdr
->seq_ctrl
= cpu_to_le16(sdata
->sequence_number
);
2861 sdata
->sequence_number
+= 0x10;
2864 if (skb_shinfo(skb
)->gso_size
)
2865 sta
->tx_stats
.msdu
[tid
] +=
2866 DIV_ROUND_UP(skb
->len
, skb_shinfo(skb
)->gso_size
);
2868 sta
->tx_stats
.msdu
[tid
]++;
2870 info
->hw_queue
= sdata
->vif
.hw_queue
[skb_get_queue_mapping(skb
)];
2872 __skb_queue_head_init(&tx
.skbs
);
2874 tx
.flags
= IEEE80211_TX_UNICAST
;
2878 tx
.key
= fast_tx
->key
;
2881 info
->control
.hw_key
= &fast_tx
->key
->conf
;
2883 if (!ieee80211_hw_check(&local
->hw
, HAS_RATE_CONTROL
)) {
2885 r
= ieee80211_tx_h_rate_ctrl(&tx
);
2889 if (r
!= TX_CONTINUE
) {
2896 /* statistics normally done by ieee80211_tx_h_stats (but that
2897 * has to consider fragmentation, so is more complex)
2899 sta
->tx_stats
.bytes
[skb_get_queue_mapping(skb
)] += skb
->len
;
2900 sta
->tx_stats
.packets
[skb_get_queue_mapping(skb
)]++;
2902 if (fast_tx
->pn_offs
) {
2904 u8
*crypto_hdr
= skb
->data
+ fast_tx
->pn_offs
;
2906 switch (fast_tx
->key
->conf
.cipher
) {
2907 case WLAN_CIPHER_SUITE_CCMP
:
2908 case WLAN_CIPHER_SUITE_CCMP_256
:
2909 case WLAN_CIPHER_SUITE_GCMP
:
2910 case WLAN_CIPHER_SUITE_GCMP_256
:
2911 pn
= atomic64_inc_return(&fast_tx
->key
->conf
.tx_pn
);
2913 crypto_hdr
[1] = pn
>> 8;
2914 crypto_hdr
[4] = pn
>> 16;
2915 crypto_hdr
[5] = pn
>> 24;
2916 crypto_hdr
[6] = pn
>> 32;
2917 crypto_hdr
[7] = pn
>> 40;
2922 if (sdata
->vif
.type
== NL80211_IFTYPE_AP_VLAN
)
2923 sdata
= container_of(sdata
->bss
,
2924 struct ieee80211_sub_if_data
, u
.ap
);
2926 __skb_queue_tail(&tx
.skbs
, skb
);
2927 ieee80211_tx_frags(local
, &sdata
->vif
, &sta
->sta
, &tx
.skbs
, false);
2931 void __ieee80211_subif_start_xmit(struct sk_buff
*skb
,
2932 struct net_device
*dev
,
2935 struct ieee80211_sub_if_data
*sdata
= IEEE80211_DEV_TO_SUB_IF(dev
);
2936 struct sta_info
*sta
;
2937 struct sk_buff
*next
;
2939 if (unlikely(skb
->len
< ETH_HLEN
)) {
2946 if (ieee80211_lookup_ra_sta(sdata
, skb
, &sta
))
2949 if (!IS_ERR_OR_NULL(sta
)) {
2950 struct ieee80211_fast_tx
*fast_tx
;
2952 fast_tx
= rcu_dereference(sta
->fast_tx
);
2955 ieee80211_xmit_fast(sdata
, dev
, sta
, fast_tx
, skb
))
2959 if (skb_is_gso(skb
)) {
2960 struct sk_buff
*segs
;
2962 segs
= skb_gso_segment(skb
, 0);
2970 /* we cannot process non-linear frames on this path */
2971 if (skb_linearize(skb
)) {
2976 /* the frame could be fragmented, software-encrypted, and other
2977 * things so we cannot really handle checksum offload with it -
2978 * fix it up in software before we handle anything else.
2980 if (skb
->ip_summed
== CHECKSUM_PARTIAL
) {
2981 skb_set_transport_header(skb
,
2982 skb_checksum_start_offset(skb
));
2983 if (skb_checksum_help(skb
))
2996 skb
= ieee80211_build_hdr(sdata
, skb
, info_flags
, sta
);
3000 ieee80211_tx_stats(dev
, skb
->len
);
3002 ieee80211_xmit(sdata
, sta
, skb
);
3012 * ieee80211_subif_start_xmit - netif start_xmit function for 802.3 vifs
3013 * @skb: packet to be sent
3014 * @dev: incoming interface
3016 * On failure skb will be freed.
3018 netdev_tx_t
ieee80211_subif_start_xmit(struct sk_buff
*skb
,
3019 struct net_device
*dev
)
3021 __ieee80211_subif_start_xmit(skb
, dev
, 0);
3022 return NETDEV_TX_OK
;
3026 ieee80211_build_data_template(struct ieee80211_sub_if_data
*sdata
,
3027 struct sk_buff
*skb
, u32 info_flags
)
3029 struct ieee80211_hdr
*hdr
;
3030 struct ieee80211_tx_data tx
= {
3031 .local
= sdata
->local
,
3034 struct sta_info
*sta
;
3038 if (ieee80211_lookup_ra_sta(sdata
, skb
, &sta
)) {
3040 skb
= ERR_PTR(-EINVAL
);
3044 skb
= ieee80211_build_hdr(sdata
, skb
, info_flags
, sta
);
3048 hdr
= (void *)skb
->data
;
3049 tx
.sta
= sta_info_get(sdata
, hdr
->addr1
);
3052 if (ieee80211_tx_h_select_key(&tx
) != TX_CONTINUE
) {
3055 return ERR_PTR(-EINVAL
);
3064 * ieee80211_clear_tx_pending may not be called in a context where
3065 * it is possible that it packets could come in again.
3067 void ieee80211_clear_tx_pending(struct ieee80211_local
*local
)
3069 struct sk_buff
*skb
;
3072 for (i
= 0; i
< local
->hw
.queues
; i
++) {
3073 while ((skb
= skb_dequeue(&local
->pending
[i
])) != NULL
)
3074 ieee80211_free_txskb(&local
->hw
, skb
);
3079 * Returns false if the frame couldn't be transmitted but was queued instead,
3080 * which in this case means re-queued -- take as an indication to stop sending
3081 * more pending frames.
3083 static bool ieee80211_tx_pending_skb(struct ieee80211_local
*local
,
3084 struct sk_buff
*skb
)
3086 struct ieee80211_tx_info
*info
= IEEE80211_SKB_CB(skb
);
3087 struct ieee80211_sub_if_data
*sdata
;
3088 struct sta_info
*sta
;
3089 struct ieee80211_hdr
*hdr
;
3091 struct ieee80211_chanctx_conf
*chanctx_conf
;
3093 sdata
= vif_to_sdata(info
->control
.vif
);
3095 if (info
->flags
& IEEE80211_TX_INTFL_NEED_TXPROCESSING
) {
3096 chanctx_conf
= rcu_dereference(sdata
->vif
.chanctx_conf
);
3097 if (unlikely(!chanctx_conf
)) {
3101 info
->band
= chanctx_conf
->def
.chan
->band
;
3102 result
= ieee80211_tx(sdata
, NULL
, skb
, true);
3104 struct sk_buff_head skbs
;
3106 __skb_queue_head_init(&skbs
);
3107 __skb_queue_tail(&skbs
, skb
);
3109 hdr
= (struct ieee80211_hdr
*)skb
->data
;
3110 sta
= sta_info_get(sdata
, hdr
->addr1
);
3112 result
= __ieee80211_tx(local
, &skbs
, skb
->len
, sta
, true);
3119 * Transmit all pending packets. Called from tasklet.
3121 void ieee80211_tx_pending(unsigned long data
)
3123 struct ieee80211_local
*local
= (struct ieee80211_local
*)data
;
3124 unsigned long flags
;
3130 spin_lock_irqsave(&local
->queue_stop_reason_lock
, flags
);
3131 for (i
= 0; i
< local
->hw
.queues
; i
++) {
3133 * If queue is stopped by something other than due to pending
3134 * frames, or we have no pending frames, proceed to next queue.
3136 if (local
->queue_stop_reasons
[i
] ||
3137 skb_queue_empty(&local
->pending
[i
]))
3140 while (!skb_queue_empty(&local
->pending
[i
])) {
3141 struct sk_buff
*skb
= __skb_dequeue(&local
->pending
[i
]);
3142 struct ieee80211_tx_info
*info
= IEEE80211_SKB_CB(skb
);
3144 if (WARN_ON(!info
->control
.vif
)) {
3145 ieee80211_free_txskb(&local
->hw
, skb
);
3149 spin_unlock_irqrestore(&local
->queue_stop_reason_lock
,
3152 txok
= ieee80211_tx_pending_skb(local
, skb
);
3153 spin_lock_irqsave(&local
->queue_stop_reason_lock
,
3159 if (skb_queue_empty(&local
->pending
[i
]))
3160 ieee80211_propagate_queue_wake(local
, i
);
3162 spin_unlock_irqrestore(&local
->queue_stop_reason_lock
, flags
);
3167 /* functions for drivers to get certain frames */
3169 static void __ieee80211_beacon_add_tim(struct ieee80211_sub_if_data
*sdata
,
3170 struct ps_data
*ps
, struct sk_buff
*skb
,
3175 int i
, have_bits
= 0, n1
, n2
;
3177 /* Generate bitmap for TIM only if there are any STAs in power save
3179 if (atomic_read(&ps
->num_sta_ps
) > 0)
3180 /* in the hope that this is faster than
3181 * checking byte-for-byte */
3182 have_bits
= !bitmap_empty((unsigned long *)ps
->tim
,
3183 IEEE80211_MAX_AID
+1);
3185 if (ps
->dtim_count
== 0)
3186 ps
->dtim_count
= sdata
->vif
.bss_conf
.dtim_period
- 1;
3191 tim
= pos
= (u8
*) skb_put(skb
, 6);
3192 *pos
++ = WLAN_EID_TIM
;
3194 *pos
++ = ps
->dtim_count
;
3195 *pos
++ = sdata
->vif
.bss_conf
.dtim_period
;
3197 if (ps
->dtim_count
== 0 && !skb_queue_empty(&ps
->bc_buf
))
3200 ps
->dtim_bc_mc
= aid0
== 1;
3203 /* Find largest even number N1 so that bits numbered 1 through
3204 * (N1 x 8) - 1 in the bitmap are 0 and number N2 so that bits
3205 * (N2 + 1) x 8 through 2007 are 0. */
3207 for (i
= 0; i
< IEEE80211_MAX_TIM_LEN
; i
++) {
3214 for (i
= IEEE80211_MAX_TIM_LEN
- 1; i
>= n1
; i
--) {
3221 /* Bitmap control */
3223 /* Part Virt Bitmap */
3224 skb_put(skb
, n2
- n1
);
3225 memcpy(pos
, ps
->tim
+ n1
, n2
- n1
+ 1);
3227 tim
[1] = n2
- n1
+ 4;
3229 *pos
++ = aid0
; /* Bitmap control */
3230 *pos
++ = 0; /* Part Virt Bitmap */
3234 static int ieee80211_beacon_add_tim(struct ieee80211_sub_if_data
*sdata
,
3235 struct ps_data
*ps
, struct sk_buff
*skb
,
3238 struct ieee80211_local
*local
= sdata
->local
;
3241 * Not very nice, but we want to allow the driver to call
3242 * ieee80211_beacon_get() as a response to the set_tim()
3243 * callback. That, however, is already invoked under the
3244 * sta_lock to guarantee consistent and race-free update
3245 * of the tim bitmap in mac80211 and the driver.
3247 if (local
->tim_in_locked_section
) {
3248 __ieee80211_beacon_add_tim(sdata
, ps
, skb
, is_template
);
3250 spin_lock_bh(&local
->tim_lock
);
3251 __ieee80211_beacon_add_tim(sdata
, ps
, skb
, is_template
);
3252 spin_unlock_bh(&local
->tim_lock
);
3258 static void ieee80211_set_csa(struct ieee80211_sub_if_data
*sdata
,
3259 struct beacon_data
*beacon
)
3261 struct probe_resp
*resp
;
3263 size_t beacon_data_len
;
3265 u8 count
= beacon
->csa_current_counter
;
3267 switch (sdata
->vif
.type
) {
3268 case NL80211_IFTYPE_AP
:
3269 beacon_data
= beacon
->tail
;
3270 beacon_data_len
= beacon
->tail_len
;
3272 case NL80211_IFTYPE_ADHOC
:
3273 beacon_data
= beacon
->head
;
3274 beacon_data_len
= beacon
->head_len
;
3276 case NL80211_IFTYPE_MESH_POINT
:
3277 beacon_data
= beacon
->head
;
3278 beacon_data_len
= beacon
->head_len
;
3285 for (i
= 0; i
< IEEE80211_MAX_CSA_COUNTERS_NUM
; ++i
) {
3286 resp
= rcu_dereference(sdata
->u
.ap
.probe_resp
);
3288 if (beacon
->csa_counter_offsets
[i
]) {
3289 if (WARN_ON_ONCE(beacon
->csa_counter_offsets
[i
] >=
3295 beacon_data
[beacon
->csa_counter_offsets
[i
]] = count
;
3298 if (sdata
->vif
.type
== NL80211_IFTYPE_AP
&& resp
)
3299 resp
->data
[resp
->csa_counter_offsets
[i
]] = count
;
3304 static u8
__ieee80211_csa_update_counter(struct beacon_data
*beacon
)
3306 beacon
->csa_current_counter
--;
3308 /* the counter should never reach 0 */
3309 WARN_ON_ONCE(!beacon
->csa_current_counter
);
3311 return beacon
->csa_current_counter
;
3314 u8
ieee80211_csa_update_counter(struct ieee80211_vif
*vif
)
3316 struct ieee80211_sub_if_data
*sdata
= vif_to_sdata(vif
);
3317 struct beacon_data
*beacon
= NULL
;
3322 if (sdata
->vif
.type
== NL80211_IFTYPE_AP
)
3323 beacon
= rcu_dereference(sdata
->u
.ap
.beacon
);
3324 else if (sdata
->vif
.type
== NL80211_IFTYPE_ADHOC
)
3325 beacon
= rcu_dereference(sdata
->u
.ibss
.presp
);
3326 else if (ieee80211_vif_is_mesh(&sdata
->vif
))
3327 beacon
= rcu_dereference(sdata
->u
.mesh
.beacon
);
3332 count
= __ieee80211_csa_update_counter(beacon
);
3338 EXPORT_SYMBOL(ieee80211_csa_update_counter
);
3340 bool ieee80211_csa_is_complete(struct ieee80211_vif
*vif
)
3342 struct ieee80211_sub_if_data
*sdata
= vif_to_sdata(vif
);
3343 struct beacon_data
*beacon
= NULL
;
3345 size_t beacon_data_len
;
3348 if (!ieee80211_sdata_running(sdata
))
3352 if (vif
->type
== NL80211_IFTYPE_AP
) {
3353 struct ieee80211_if_ap
*ap
= &sdata
->u
.ap
;
3355 beacon
= rcu_dereference(ap
->beacon
);
3356 if (WARN_ON(!beacon
|| !beacon
->tail
))
3358 beacon_data
= beacon
->tail
;
3359 beacon_data_len
= beacon
->tail_len
;
3360 } else if (vif
->type
== NL80211_IFTYPE_ADHOC
) {
3361 struct ieee80211_if_ibss
*ifibss
= &sdata
->u
.ibss
;
3363 beacon
= rcu_dereference(ifibss
->presp
);
3367 beacon_data
= beacon
->head
;
3368 beacon_data_len
= beacon
->head_len
;
3369 } else if (vif
->type
== NL80211_IFTYPE_MESH_POINT
) {
3370 struct ieee80211_if_mesh
*ifmsh
= &sdata
->u
.mesh
;
3372 beacon
= rcu_dereference(ifmsh
->beacon
);
3376 beacon_data
= beacon
->head
;
3377 beacon_data_len
= beacon
->head_len
;
3383 if (!beacon
->csa_counter_offsets
[0])
3386 if (WARN_ON_ONCE(beacon
->csa_counter_offsets
[0] > beacon_data_len
))
3389 if (beacon_data
[beacon
->csa_counter_offsets
[0]] == 1)
3396 EXPORT_SYMBOL(ieee80211_csa_is_complete
);
3398 static struct sk_buff
*
3399 __ieee80211_beacon_get(struct ieee80211_hw
*hw
,
3400 struct ieee80211_vif
*vif
,
3401 struct ieee80211_mutable_offsets
*offs
,
3404 struct ieee80211_local
*local
= hw_to_local(hw
);
3405 struct beacon_data
*beacon
= NULL
;
3406 struct sk_buff
*skb
= NULL
;
3407 struct ieee80211_tx_info
*info
;
3408 struct ieee80211_sub_if_data
*sdata
= NULL
;
3409 enum ieee80211_band band
;
3410 struct ieee80211_tx_rate_control txrc
;
3411 struct ieee80211_chanctx_conf
*chanctx_conf
;
3412 int csa_off_base
= 0;
3416 sdata
= vif_to_sdata(vif
);
3417 chanctx_conf
= rcu_dereference(sdata
->vif
.chanctx_conf
);
3419 if (!ieee80211_sdata_running(sdata
) || !chanctx_conf
)
3423 memset(offs
, 0, sizeof(*offs
));
3425 if (sdata
->vif
.type
== NL80211_IFTYPE_AP
) {
3426 struct ieee80211_if_ap
*ap
= &sdata
->u
.ap
;
3428 beacon
= rcu_dereference(ap
->beacon
);
3430 if (beacon
->csa_counter_offsets
[0]) {
3432 __ieee80211_csa_update_counter(beacon
);
3434 ieee80211_set_csa(sdata
, beacon
);
3438 * headroom, head length,
3439 * tail length and maximum TIM length
3441 skb
= dev_alloc_skb(local
->tx_headroom
+
3443 beacon
->tail_len
+ 256 +
3444 local
->hw
.extra_beacon_tailroom
);
3448 skb_reserve(skb
, local
->tx_headroom
);
3449 memcpy(skb_put(skb
, beacon
->head_len
), beacon
->head
,
3452 ieee80211_beacon_add_tim(sdata
, &ap
->ps
, skb
,
3456 offs
->tim_offset
= beacon
->head_len
;
3457 offs
->tim_length
= skb
->len
- beacon
->head_len
;
3459 /* for AP the csa offsets are from tail */
3460 csa_off_base
= skb
->len
;
3464 memcpy(skb_put(skb
, beacon
->tail_len
),
3465 beacon
->tail
, beacon
->tail_len
);
3468 } else if (sdata
->vif
.type
== NL80211_IFTYPE_ADHOC
) {
3469 struct ieee80211_if_ibss
*ifibss
= &sdata
->u
.ibss
;
3470 struct ieee80211_hdr
*hdr
;
3472 beacon
= rcu_dereference(ifibss
->presp
);
3476 if (beacon
->csa_counter_offsets
[0]) {
3478 __ieee80211_csa_update_counter(beacon
);
3480 ieee80211_set_csa(sdata
, beacon
);
3483 skb
= dev_alloc_skb(local
->tx_headroom
+ beacon
->head_len
+
3484 local
->hw
.extra_beacon_tailroom
);
3487 skb_reserve(skb
, local
->tx_headroom
);
3488 memcpy(skb_put(skb
, beacon
->head_len
), beacon
->head
,
3491 hdr
= (struct ieee80211_hdr
*) skb
->data
;
3492 hdr
->frame_control
= cpu_to_le16(IEEE80211_FTYPE_MGMT
|
3493 IEEE80211_STYPE_BEACON
);
3494 } else if (ieee80211_vif_is_mesh(&sdata
->vif
)) {
3495 struct ieee80211_if_mesh
*ifmsh
= &sdata
->u
.mesh
;
3497 beacon
= rcu_dereference(ifmsh
->beacon
);
3501 if (beacon
->csa_counter_offsets
[0]) {
3503 /* TODO: For mesh csa_counter is in TU, so
3504 * decrementing it by one isn't correct, but
3505 * for now we leave it consistent with overall
3506 * mac80211's behavior.
3508 __ieee80211_csa_update_counter(beacon
);
3510 ieee80211_set_csa(sdata
, beacon
);
3513 if (ifmsh
->sync_ops
)
3514 ifmsh
->sync_ops
->adjust_tbtt(sdata
, beacon
);
3516 skb
= dev_alloc_skb(local
->tx_headroom
+
3520 local
->hw
.extra_beacon_tailroom
);
3523 skb_reserve(skb
, local
->tx_headroom
);
3524 memcpy(skb_put(skb
, beacon
->head_len
), beacon
->head
,
3526 ieee80211_beacon_add_tim(sdata
, &ifmsh
->ps
, skb
, is_template
);
3529 offs
->tim_offset
= beacon
->head_len
;
3530 offs
->tim_length
= skb
->len
- beacon
->head_len
;
3533 memcpy(skb_put(skb
, beacon
->tail_len
), beacon
->tail
,
3541 if (offs
&& beacon
) {
3544 for (i
= 0; i
< IEEE80211_MAX_CSA_COUNTERS_NUM
; i
++) {
3545 u16 csa_off
= beacon
->csa_counter_offsets
[i
];
3550 offs
->csa_counter_offs
[i
] = csa_off_base
+ csa_off
;
3554 band
= chanctx_conf
->def
.chan
->band
;
3556 info
= IEEE80211_SKB_CB(skb
);
3558 info
->flags
|= IEEE80211_TX_INTFL_DONT_ENCRYPT
;
3559 info
->flags
|= IEEE80211_TX_CTL_NO_ACK
;
3562 memset(&txrc
, 0, sizeof(txrc
));
3564 txrc
.sband
= local
->hw
.wiphy
->bands
[band
];
3565 txrc
.bss_conf
= &sdata
->vif
.bss_conf
;
3567 txrc
.reported_rate
.idx
= -1;
3568 txrc
.rate_idx_mask
= sdata
->rc_rateidx_mask
[band
];
3569 if (txrc
.rate_idx_mask
== (1 << txrc
.sband
->n_bitrates
) - 1)
3570 txrc
.max_rate_idx
= -1;
3572 txrc
.max_rate_idx
= fls(txrc
.rate_idx_mask
) - 1;
3574 rate_control_get_rate(sdata
, NULL
, &txrc
);
3576 info
->control
.vif
= vif
;
3578 info
->flags
|= IEEE80211_TX_CTL_CLEAR_PS_FILT
|
3579 IEEE80211_TX_CTL_ASSIGN_SEQ
|
3580 IEEE80211_TX_CTL_FIRST_FRAGMENT
;
3588 ieee80211_beacon_get_template(struct ieee80211_hw
*hw
,
3589 struct ieee80211_vif
*vif
,
3590 struct ieee80211_mutable_offsets
*offs
)
3592 return __ieee80211_beacon_get(hw
, vif
, offs
, true);
3594 EXPORT_SYMBOL(ieee80211_beacon_get_template
);
3596 struct sk_buff
*ieee80211_beacon_get_tim(struct ieee80211_hw
*hw
,
3597 struct ieee80211_vif
*vif
,
3598 u16
*tim_offset
, u16
*tim_length
)
3600 struct ieee80211_mutable_offsets offs
= {};
3601 struct sk_buff
*bcn
= __ieee80211_beacon_get(hw
, vif
, &offs
, false);
3602 struct sk_buff
*copy
;
3603 struct ieee80211_supported_band
*sband
;
3610 *tim_offset
= offs
.tim_offset
;
3613 *tim_length
= offs
.tim_length
;
3615 if (ieee80211_hw_check(hw
, BEACON_TX_STATUS
) ||
3616 !hw_to_local(hw
)->monitors
)
3619 /* send a copy to monitor interfaces */
3620 copy
= skb_copy(bcn
, GFP_ATOMIC
);
3624 shift
= ieee80211_vif_get_shift(vif
);
3625 sband
= hw
->wiphy
->bands
[ieee80211_get_sdata_band(vif_to_sdata(vif
))];
3626 ieee80211_tx_monitor(hw_to_local(hw
), copy
, sband
, 1, shift
, false);
3630 EXPORT_SYMBOL(ieee80211_beacon_get_tim
);
3632 struct sk_buff
*ieee80211_proberesp_get(struct ieee80211_hw
*hw
,
3633 struct ieee80211_vif
*vif
)
3635 struct ieee80211_if_ap
*ap
= NULL
;
3636 struct sk_buff
*skb
= NULL
;
3637 struct probe_resp
*presp
= NULL
;
3638 struct ieee80211_hdr
*hdr
;
3639 struct ieee80211_sub_if_data
*sdata
= vif_to_sdata(vif
);
3641 if (sdata
->vif
.type
!= NL80211_IFTYPE_AP
)
3647 presp
= rcu_dereference(ap
->probe_resp
);
3651 skb
= dev_alloc_skb(presp
->len
);
3655 memcpy(skb_put(skb
, presp
->len
), presp
->data
, presp
->len
);
3657 hdr
= (struct ieee80211_hdr
*) skb
->data
;
3658 memset(hdr
->addr1
, 0, sizeof(hdr
->addr1
));
3664 EXPORT_SYMBOL(ieee80211_proberesp_get
);
3666 struct sk_buff
*ieee80211_pspoll_get(struct ieee80211_hw
*hw
,
3667 struct ieee80211_vif
*vif
)
3669 struct ieee80211_sub_if_data
*sdata
;
3670 struct ieee80211_if_managed
*ifmgd
;
3671 struct ieee80211_pspoll
*pspoll
;
3672 struct ieee80211_local
*local
;
3673 struct sk_buff
*skb
;
3675 if (WARN_ON(vif
->type
!= NL80211_IFTYPE_STATION
))
3678 sdata
= vif_to_sdata(vif
);
3679 ifmgd
= &sdata
->u
.mgd
;
3680 local
= sdata
->local
;
3682 skb
= dev_alloc_skb(local
->hw
.extra_tx_headroom
+ sizeof(*pspoll
));
3686 skb_reserve(skb
, local
->hw
.extra_tx_headroom
);
3688 pspoll
= (struct ieee80211_pspoll
*) skb_put(skb
, sizeof(*pspoll
));
3689 memset(pspoll
, 0, sizeof(*pspoll
));
3690 pspoll
->frame_control
= cpu_to_le16(IEEE80211_FTYPE_CTL
|
3691 IEEE80211_STYPE_PSPOLL
);
3692 pspoll
->aid
= cpu_to_le16(ifmgd
->aid
);
3694 /* aid in PS-Poll has its two MSBs each set to 1 */
3695 pspoll
->aid
|= cpu_to_le16(1 << 15 | 1 << 14);
3697 memcpy(pspoll
->bssid
, ifmgd
->bssid
, ETH_ALEN
);
3698 memcpy(pspoll
->ta
, vif
->addr
, ETH_ALEN
);
3702 EXPORT_SYMBOL(ieee80211_pspoll_get
);
3704 struct sk_buff
*ieee80211_nullfunc_get(struct ieee80211_hw
*hw
,
3705 struct ieee80211_vif
*vif
)
3707 struct ieee80211_hdr_3addr
*nullfunc
;
3708 struct ieee80211_sub_if_data
*sdata
;
3709 struct ieee80211_if_managed
*ifmgd
;
3710 struct ieee80211_local
*local
;
3711 struct sk_buff
*skb
;
3713 if (WARN_ON(vif
->type
!= NL80211_IFTYPE_STATION
))
3716 sdata
= vif_to_sdata(vif
);
3717 ifmgd
= &sdata
->u
.mgd
;
3718 local
= sdata
->local
;
3720 skb
= dev_alloc_skb(local
->hw
.extra_tx_headroom
+ sizeof(*nullfunc
));
3724 skb_reserve(skb
, local
->hw
.extra_tx_headroom
);
3726 nullfunc
= (struct ieee80211_hdr_3addr
*) skb_put(skb
,
3728 memset(nullfunc
, 0, sizeof(*nullfunc
));
3729 nullfunc
->frame_control
= cpu_to_le16(IEEE80211_FTYPE_DATA
|
3730 IEEE80211_STYPE_NULLFUNC
|
3731 IEEE80211_FCTL_TODS
);
3732 memcpy(nullfunc
->addr1
, ifmgd
->bssid
, ETH_ALEN
);
3733 memcpy(nullfunc
->addr2
, vif
->addr
, ETH_ALEN
);
3734 memcpy(nullfunc
->addr3
, ifmgd
->bssid
, ETH_ALEN
);
3738 EXPORT_SYMBOL(ieee80211_nullfunc_get
);
3740 struct sk_buff
*ieee80211_probereq_get(struct ieee80211_hw
*hw
,
3742 const u8
*ssid
, size_t ssid_len
,
3745 struct ieee80211_local
*local
= hw_to_local(hw
);
3746 struct ieee80211_hdr_3addr
*hdr
;
3747 struct sk_buff
*skb
;
3751 ie_ssid_len
= 2 + ssid_len
;
3753 skb
= dev_alloc_skb(local
->hw
.extra_tx_headroom
+ sizeof(*hdr
) +
3754 ie_ssid_len
+ tailroom
);
3758 skb_reserve(skb
, local
->hw
.extra_tx_headroom
);
3760 hdr
= (struct ieee80211_hdr_3addr
*) skb_put(skb
, sizeof(*hdr
));
3761 memset(hdr
, 0, sizeof(*hdr
));
3762 hdr
->frame_control
= cpu_to_le16(IEEE80211_FTYPE_MGMT
|
3763 IEEE80211_STYPE_PROBE_REQ
);
3764 eth_broadcast_addr(hdr
->addr1
);
3765 memcpy(hdr
->addr2
, src_addr
, ETH_ALEN
);
3766 eth_broadcast_addr(hdr
->addr3
);
3768 pos
= skb_put(skb
, ie_ssid_len
);
3769 *pos
++ = WLAN_EID_SSID
;
3772 memcpy(pos
, ssid
, ssid_len
);
3777 EXPORT_SYMBOL(ieee80211_probereq_get
);
3779 void ieee80211_rts_get(struct ieee80211_hw
*hw
, struct ieee80211_vif
*vif
,
3780 const void *frame
, size_t frame_len
,
3781 const struct ieee80211_tx_info
*frame_txctl
,
3782 struct ieee80211_rts
*rts
)
3784 const struct ieee80211_hdr
*hdr
= frame
;
3786 rts
->frame_control
=
3787 cpu_to_le16(IEEE80211_FTYPE_CTL
| IEEE80211_STYPE_RTS
);
3788 rts
->duration
= ieee80211_rts_duration(hw
, vif
, frame_len
,
3790 memcpy(rts
->ra
, hdr
->addr1
, sizeof(rts
->ra
));
3791 memcpy(rts
->ta
, hdr
->addr2
, sizeof(rts
->ta
));
3793 EXPORT_SYMBOL(ieee80211_rts_get
);
3795 void ieee80211_ctstoself_get(struct ieee80211_hw
*hw
, struct ieee80211_vif
*vif
,
3796 const void *frame
, size_t frame_len
,
3797 const struct ieee80211_tx_info
*frame_txctl
,
3798 struct ieee80211_cts
*cts
)
3800 const struct ieee80211_hdr
*hdr
= frame
;
3802 cts
->frame_control
=
3803 cpu_to_le16(IEEE80211_FTYPE_CTL
| IEEE80211_STYPE_CTS
);
3804 cts
->duration
= ieee80211_ctstoself_duration(hw
, vif
,
3805 frame_len
, frame_txctl
);
3806 memcpy(cts
->ra
, hdr
->addr1
, sizeof(cts
->ra
));
3808 EXPORT_SYMBOL(ieee80211_ctstoself_get
);
3811 ieee80211_get_buffered_bc(struct ieee80211_hw
*hw
,
3812 struct ieee80211_vif
*vif
)
3814 struct ieee80211_local
*local
= hw_to_local(hw
);
3815 struct sk_buff
*skb
= NULL
;
3816 struct ieee80211_tx_data tx
;
3817 struct ieee80211_sub_if_data
*sdata
;
3819 struct ieee80211_tx_info
*info
;
3820 struct ieee80211_chanctx_conf
*chanctx_conf
;
3822 sdata
= vif_to_sdata(vif
);
3825 chanctx_conf
= rcu_dereference(sdata
->vif
.chanctx_conf
);
3830 if (sdata
->vif
.type
== NL80211_IFTYPE_AP
) {
3831 struct beacon_data
*beacon
=
3832 rcu_dereference(sdata
->u
.ap
.beacon
);
3834 if (!beacon
|| !beacon
->head
)
3837 ps
= &sdata
->u
.ap
.ps
;
3838 } else if (ieee80211_vif_is_mesh(&sdata
->vif
)) {
3839 ps
= &sdata
->u
.mesh
.ps
;
3844 if (ps
->dtim_count
!= 0 || !ps
->dtim_bc_mc
)
3845 goto out
; /* send buffered bc/mc only after DTIM beacon */
3848 skb
= skb_dequeue(&ps
->bc_buf
);
3851 local
->total_ps_buffered
--;
3853 if (!skb_queue_empty(&ps
->bc_buf
) && skb
->len
>= 2) {
3854 struct ieee80211_hdr
*hdr
=
3855 (struct ieee80211_hdr
*) skb
->data
;
3856 /* more buffered multicast/broadcast frames ==> set
3857 * MoreData flag in IEEE 802.11 header to inform PS
3859 hdr
->frame_control
|=
3860 cpu_to_le16(IEEE80211_FCTL_MOREDATA
);
3863 if (sdata
->vif
.type
== NL80211_IFTYPE_AP
)
3864 sdata
= IEEE80211_DEV_TO_SUB_IF(skb
->dev
);
3865 if (!ieee80211_tx_prepare(sdata
, &tx
, NULL
, skb
))
3867 dev_kfree_skb_any(skb
);
3870 info
= IEEE80211_SKB_CB(skb
);
3872 tx
.flags
|= IEEE80211_TX_PS_BUFFERED
;
3873 info
->band
= chanctx_conf
->def
.chan
->band
;
3875 if (invoke_tx_handlers(&tx
))
3882 EXPORT_SYMBOL(ieee80211_get_buffered_bc
);
3884 int ieee80211_reserve_tid(struct ieee80211_sta
*pubsta
, u8 tid
)
3886 struct sta_info
*sta
= container_of(pubsta
, struct sta_info
, sta
);
3887 struct ieee80211_sub_if_data
*sdata
= sta
->sdata
;
3888 struct ieee80211_local
*local
= sdata
->local
;
3892 lockdep_assert_held(&local
->sta_mtx
);
3894 /* only some cases are supported right now */
3895 switch (sdata
->vif
.type
) {
3896 case NL80211_IFTYPE_STATION
:
3897 case NL80211_IFTYPE_AP
:
3898 case NL80211_IFTYPE_AP_VLAN
:
3905 if (WARN_ON(tid
>= IEEE80211_NUM_UPS
))
3908 if (sta
->reserved_tid
== tid
) {
3913 if (sta
->reserved_tid
!= IEEE80211_TID_UNRESERVED
) {
3914 sdata_err(sdata
, "TID reservation already active\n");
3919 ieee80211_stop_vif_queues(sdata
->local
, sdata
,
3920 IEEE80211_QUEUE_STOP_REASON_RESERVE_TID
);
3924 /* Tear down BA sessions so we stop aggregating on this TID */
3925 if (ieee80211_hw_check(&local
->hw
, AMPDU_AGGREGATION
)) {
3926 set_sta_flag(sta
, WLAN_STA_BLOCK_BA
);
3927 __ieee80211_stop_tx_ba_session(sta
, tid
,
3928 AGG_STOP_LOCAL_REQUEST
);
3931 queues
= BIT(sdata
->vif
.hw_queue
[ieee802_1d_to_ac
[tid
]]);
3932 __ieee80211_flush_queues(local
, sdata
, queues
, false);
3934 sta
->reserved_tid
= tid
;
3936 ieee80211_wake_vif_queues(local
, sdata
,
3937 IEEE80211_QUEUE_STOP_REASON_RESERVE_TID
);
3939 if (ieee80211_hw_check(&local
->hw
, AMPDU_AGGREGATION
))
3940 clear_sta_flag(sta
, WLAN_STA_BLOCK_BA
);
3946 EXPORT_SYMBOL(ieee80211_reserve_tid
);
3948 void ieee80211_unreserve_tid(struct ieee80211_sta
*pubsta
, u8 tid
)
3950 struct sta_info
*sta
= container_of(pubsta
, struct sta_info
, sta
);
3951 struct ieee80211_sub_if_data
*sdata
= sta
->sdata
;
3953 lockdep_assert_held(&sdata
->local
->sta_mtx
);
3955 /* only some cases are supported right now */
3956 switch (sdata
->vif
.type
) {
3957 case NL80211_IFTYPE_STATION
:
3958 case NL80211_IFTYPE_AP
:
3959 case NL80211_IFTYPE_AP_VLAN
:
3966 if (tid
!= sta
->reserved_tid
) {
3967 sdata_err(sdata
, "TID to unreserve (%d) isn't reserved\n", tid
);
3971 sta
->reserved_tid
= IEEE80211_TID_UNRESERVED
;
3973 EXPORT_SYMBOL(ieee80211_unreserve_tid
);
3975 void __ieee80211_tx_skb_tid_band(struct ieee80211_sub_if_data
*sdata
,
3976 struct sk_buff
*skb
, int tid
,
3977 enum ieee80211_band band
)
3979 int ac
= ieee802_1d_to_ac
[tid
& 7];
3981 skb_reset_mac_header(skb
);
3982 skb_reset_network_header(skb
);
3983 skb_reset_transport_header(skb
);
3985 skb_set_queue_mapping(skb
, ac
);
3986 skb
->priority
= tid
;
3988 skb
->dev
= sdata
->dev
;
3991 * The other path calling ieee80211_xmit is from the tasklet,
3992 * and while we can handle concurrent transmissions locking
3993 * requirements are that we do not come into tx with bhs on.
3996 IEEE80211_SKB_CB(skb
)->band
= band
;
3997 ieee80211_xmit(sdata
, NULL
, skb
);