drivers/isdn/sc/timer.c

   1 /* $Id: timer.c,v 1.3.6.1 2001/09/23 22:24:59 kai Exp $
   2  *
   3  * Copyright (C) 1996  SpellCaster Telecommunications Inc.
   4  *
   5  * This software may be used and distributed according to the terms
   6  * of the GNU General Public License, incorporated herein by reference.
   7  *
   8  * For more information, please contact gpl-info@spellcast.com or write:
   9  *
  10  *     SpellCaster Telecommunications Inc.
  11  *     5621 Finch Avenue East, Unit #3
  12  *     Scarborough, Ontario  Canada
  13  *     M1B 2T9
  14  *     +1 (416) 297-8565
  15  *     +1 (416) 297-6433 Facsimile
  16  */
  17
  18 #include "includes.h"
  19 #include "hardware.h"
  20 #include "message.h"
  21 #include "card.h"
  22
  23 extern board *sc_adapter[];
  24
  25 extern void flushreadfifo(int);
  26 extern int  startproc(int);
  27 extern int  indicate_status(int, int, unsigned long, char *);
  28 extern int  sendmessage(int, unsigned int, unsigned int, unsigned int,
  29         unsigned int, unsigned int, unsigned int, unsigned int *);
  30
  31
  32 /*
  33  * Write the proper values into the I/O ports following a reset
  34  */
  35 static void setup_ports(int card)
  36 {
  37
  38         outb((sc_adapter[card]->rambase >> 12), sc_adapter[card]->ioport[EXP_BASE]);
  39
  40         /* And the IRQ */
  41         outb((sc_adapter[card]->interrupt | 0x80),
  42                 sc_adapter[card]->ioport[IRQ_SELECT]);
  43 }
  44
  45 /*
  46  * Timed function to check the status of a previous reset
  47  * Must be very fast as this function runs in the context of
  48  * an interrupt handler.
  49  *
  50  * Setup the ioports for the board that were cleared by the reset.
  51  * Then, check to see if the signate has been set. Next, set the
  52  * signature to a known value and issue a startproc if needed.
  53  */
  54 void check_reset(unsigned long data)
  55 {
  56         unsigned long flags;
  57         unsigned long sig;
  58         int card = (unsigned int) data;
  59
  60         pr_debug("%s: check_timer timer called\n",
  61                 sc_adapter[card]->devicename);
  62
  63         /* Setup the io ports */
  64         setup_ports(card);
  65
  66         spin_lock_irqsave(&sc_adapter[card]->lock, flags);
  67         outb(sc_adapter[card]->ioport[sc_adapter[card]->shmem_pgport],
  68                 (sc_adapter[card]->shmem_magic>>14) | 0x80);
  69         sig = (unsigned long) *((unsigned long *)(sc_adapter[card]->rambase + SIG_OFFSET));
  70
  71         /* check the signature */
  72         if(sig == SIGNATURE) {
  73                 flushreadfifo(card);
  74                 spin_unlock_irqrestore(&sc_adapter[card]->lock, flags);
  75                 /* See if we need to do a startproc */
  76                 if (sc_adapter[card]->StartOnReset)
  77                         startproc(card);
  78         } else  {
  79                 pr_debug("%s: No signature yet, waiting another %d jiffies.\n",
  80                         sc_adapter[card]->devicename, CHECKRESET_TIME);
  81                 mod_timer(&sc_adapter[card]->reset_timer, jiffies+CHECKRESET_TIME);
  82                 spin_unlock_irqrestore(&sc_adapter[card]->lock, flags);
  83         }
  84 }
  85
  86 /*
  87  * Timed function to check the status of a previous reset
  88  * Must be very fast as this function runs in the context of
  89  * an interrupt handler.
  90  *
  91  * Send check sc_adapter->phystat to see if the channels are up
  92  * If they are, tell ISDN4Linux that the board is up. If not,
  93  * tell IADN4Linux that it is up. Always reset the timer to
  94  * fire again (endless loop).
  95  */
  96 void check_phystat(unsigned long data)
  97 {
  98         unsigned long flags;
  99         int card = (unsigned int) data;
 100
 101         pr_debug("%s: Checking status...\n", sc_adapter[card]->devicename);
 102         /*
 103          * check the results of the last PhyStat and change only if
 104          * has changed drastically
 105          */
 106         if (sc_adapter[card]->nphystat && !sc_adapter[card]->phystat) {   /* All is well */
 107                 pr_debug("PhyStat transition to RUN\n");
 108                 pr_info("%s: Switch contacted, transmitter enabled\n",
 109                         sc_adapter[card]->devicename);
 110                 indicate_status(card, ISDN_STAT_RUN, 0, NULL);
 111         }
 112         else if (!sc_adapter[card]->nphystat && sc_adapter[card]->phystat) {   /* All is not well */
 113                 pr_debug("PhyStat transition to STOP\n");
 114                 pr_info("%s: Switch connection lost, transmitter disabled\n",
 115                         sc_adapter[card]->devicename);
 116
 117                 indicate_status(card, ISDN_STAT_STOP, 0, NULL);
 118         }
 119
 120         sc_adapter[card]->phystat = sc_adapter[card]->nphystat;
 121
 122         /* Reinitialize the timer */
 123         spin_lock_irqsave(&sc_adapter[card]->lock, flags);
 124         mod_timer(&sc_adapter[card]->stat_timer, jiffies+CHECKSTAT_TIME);
 125         spin_unlock_irqrestore(&sc_adapter[card]->lock, flags);
 126
 127         /* Send a new cePhyStatus message */
 128         sendmessage(card, CEPID,ceReqTypePhy,ceReqClass2,
 129                 ceReqPhyStatus,0,0,NULL);
 130 }
 131