drivers/mtd/devices/docg3.h

   1 /*
   2  * Handles the M-Systems DiskOnChip G3 chip
   3  *
   4  * Copyright (C) 2011 Robert Jarzmik
   5  *
   6  * This program is free software; you can redistribute it and/or modify
   7  * it under the terms of the GNU General Public License as published by
   8  * the Free Software Foundation; either version 2 of the License, or
   9  * (at your option) any later version.
  10  *
  11  * This program is distributed in the hope that it will be useful,
  12  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  13  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  14  * GNU General Public License for more details.
  15  *
  16  * You should have received a copy of the GNU General Public License
  17  * along with this program; if not, write to the Free Software
  18  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  19  *
  20  */
  21
  22 #ifndef _MTD_DOCG3_H
  23 #define _MTD_DOCG3_H
  24
  25 #include <linux/mtd/mtd.h>
  26
  27 /*
  28  * Flash memory areas :
  29  *   - 0x0000 .. 0x07ff : IPL
  30  *   - 0x0800 .. 0x0fff : Data area
  31  *   - 0x1000 .. 0x17ff : Registers
  32  *   - 0x1800 .. 0x1fff : Unknown
  33  */
  34 #define DOC_IOSPACE_IPL                 0x0000
  35 #define DOC_IOSPACE_DATA                0x0800
  36 #define DOC_IOSPACE_SIZE                0x2000
  37
  38 /*
  39  * DOC G3 layout and adressing scheme
  40  *   A page address for the block "b", plane "P" and page "p":
  41  *   address = [bbbb bPpp pppp]
  42  */
  43
  44 #define DOC_ADDR_PAGE_MASK              0x3f
  45 #define DOC_ADDR_BLOCK_SHIFT            6
  46 #define DOC_LAYOUT_NBPLANES             2
  47 #define DOC_LAYOUT_PAGES_PER_BLOCK      64
  48 #define DOC_LAYOUT_PAGE_SIZE            512
  49 #define DOC_LAYOUT_OOB_SIZE             16
  50 #define DOC_LAYOUT_WEAR_SIZE            8
  51 #define DOC_LAYOUT_PAGE_OOB_SIZE                                \
  52         (DOC_LAYOUT_PAGE_SIZE + DOC_LAYOUT_OOB_SIZE)
  53 #define DOC_LAYOUT_WEAR_OFFSET          (DOC_LAYOUT_PAGE_OOB_SIZE * 2)
  54 #define DOC_LAYOUT_BLOCK_SIZE                                   \
  55         (DOC_LAYOUT_PAGES_PER_BLOCK * DOC_LAYOUT_PAGE_SIZE)
  56
  57 /*
  58  * ECC related constants
  59  */
  60 #define DOC_ECC_BCH_M                   14
  61 #define DOC_ECC_BCH_T                   4
  62 #define DOC_ECC_BCH_PRIMPOLY            0x4443
  63 #define DOC_ECC_BCH_SIZE                7
  64 #define DOC_ECC_BCH_COVERED_BYTES                               \
  65         (DOC_LAYOUT_PAGE_SIZE + DOC_LAYOUT_OOB_PAGEINFO_SZ +    \
  66          DOC_LAYOUT_OOB_HAMMING_SZ)
  67 #define DOC_ECC_BCH_TOTAL_BYTES                                 \
  68         (DOC_ECC_BCH_COVERED_BYTES + DOC_LAYOUT_OOB_BCH_SZ)
  69
  70 /*
  71  * Blocks distribution
  72  */
  73 #define DOC_LAYOUT_BLOCK_BBT            0
  74 #define DOC_LAYOUT_BLOCK_OTP            0
  75 #define DOC_LAYOUT_BLOCK_FIRST_DATA     6
  76
  77 #define DOC_LAYOUT_PAGE_BBT             4
  78
  79 /*
  80  * Extra page OOB (16 bytes wide) layout
  81  */
  82 #define DOC_LAYOUT_OOB_PAGEINFO_OFS     0
  83 #define DOC_LAYOUT_OOB_HAMMING_OFS      7
  84 #define DOC_LAYOUT_OOB_BCH_OFS          8
  85 #define DOC_LAYOUT_OOB_UNUSED_OFS       15
  86 #define DOC_LAYOUT_OOB_PAGEINFO_SZ      7
  87 #define DOC_LAYOUT_OOB_HAMMING_SZ       1
  88 #define DOC_LAYOUT_OOB_BCH_SZ           7
  89 #define DOC_LAYOUT_OOB_UNUSED_SZ        1
  90
  91
  92 #define DOC_CHIPID_G3                   0x200
  93 #define DOC_ERASE_MARK                  0xaa
  94 #define DOC_MAX_NBFLOORS                4
  95 /*
  96  * Flash registers
  97  */
  98 #define DOC_CHIPID                      0x1000
  99 #define DOC_TEST                        0x1004
 100 #define DOC_BUSLOCK                     0x1006
 101 #define DOC_ENDIANCONTROL               0x1008
 102 #define DOC_DEVICESELECT                0x100a
 103 #define DOC_ASICMODE                    0x100c
 104 #define DOC_CONFIGURATION               0x100e
 105 #define DOC_INTERRUPTCONTROL            0x1010
 106 #define DOC_READADDRESS                 0x101a
 107 #define DOC_DATAEND                     0x101e
 108 #define DOC_INTERRUPTSTATUS             0x1020
 109
 110 #define DOC_FLASHSEQUENCE               0x1032
 111 #define DOC_FLASHCOMMAND                0x1034
 112 #define DOC_FLASHADDRESS                0x1036
 113 #define DOC_FLASHCONTROL                0x1038
 114 #define DOC_NOP                         0x103e
 115
 116 #define DOC_ECCCONF0                    0x1040
 117 #define DOC_ECCCONF1                    0x1042
 118 #define DOC_ECCPRESET                   0x1044
 119 #define DOC_HAMMINGPARITY               0x1046
 120 #define DOC_BCH_HW_ECC(idx)             (0x1048 + idx)
 121
 122 #define DOC_PROTECTION                  0x1056
 123 #define DOC_DPS0_KEY                    0x105c
 124 #define DOC_DPS1_KEY                    0x105e
 125 #define DOC_DPS0_ADDRLOW                0x1060
 126 #define DOC_DPS0_ADDRHIGH               0x1062
 127 #define DOC_DPS1_ADDRLOW                0x1064
 128 #define DOC_DPS1_ADDRHIGH               0x1066
 129 #define DOC_DPS0_STATUS                 0x106c
 130 #define DOC_DPS1_STATUS                 0x106e
 131
 132 #define DOC_ASICMODECONFIRM             0x1072
 133 #define DOC_CHIPID_INV                  0x1074
 134 #define DOC_POWERMODE                   0x107c
 135
 136 /*
 137  * Flash sequences
 138  * A sequence is preset before one or more commands are input to the chip.
 139  */
 140 #define DOC_SEQ_RESET                   0x00
 141 #define DOC_SEQ_PAGE_SIZE_532           0x03
 142 #define DOC_SEQ_SET_FASTMODE            0x05
 143 #define DOC_SEQ_SET_RELIABLEMODE        0x09
 144 #define DOC_SEQ_READ                    0x12
 145 #define DOC_SEQ_SET_PLANE1              0x0e
 146 #define DOC_SEQ_SET_PLANE2              0x10
 147 #define DOC_SEQ_PAGE_SETUP              0x1d
 148 #define DOC_SEQ_ERASE                   0x27
 149 #define DOC_SEQ_PLANES_STATUS           0x31
 150
 151 /*
 152  * Flash commands
 153  */
 154 #define DOC_CMD_READ_PLANE1             0x00
 155 #define DOC_CMD_SET_ADDR_READ           0x05
 156 #define DOC_CMD_READ_ALL_PLANES         0x30
 157 #define DOC_CMD_READ_PLANE2             0x50
 158 #define DOC_CMD_READ_FLASH              0xe0
 159 #define DOC_CMD_PAGE_SIZE_532           0x3c
 160
 161 #define DOC_CMD_PROG_BLOCK_ADDR         0x60
 162 #define DOC_CMD_PROG_CYCLE1             0x80
 163 #define DOC_CMD_PROG_CYCLE2             0x10
 164 #define DOC_CMD_PROG_CYCLE3             0x11
 165 #define DOC_CMD_ERASECYCLE2             0xd0
 166 #define DOC_CMD_READ_STATUS             0x70
 167 #define DOC_CMD_PLANES_STATUS           0x71
 168
 169 #define DOC_CMD_RELIABLE_MODE           0x22
 170 #define DOC_CMD_FAST_MODE               0xa2
 171
 172 #define DOC_CMD_RESET                   0xff
 173
 174 /*
 175  * Flash register : DOC_FLASHCONTROL
 176  */
 177 #define DOC_CTRL_VIOLATION              0x20
 178 #define DOC_CTRL_CE                     0x10
 179 #define DOC_CTRL_UNKNOWN_BITS           0x08
 180 #define DOC_CTRL_PROTECTION_ERROR       0x04
 181 #define DOC_CTRL_SEQUENCE_ERROR         0x02
 182 #define DOC_CTRL_FLASHREADY             0x01
 183
 184 /*
 185  * Flash register : DOC_ASICMODE
 186  */
 187 #define DOC_ASICMODE_RESET              0x00
 188 #define DOC_ASICMODE_NORMAL             0x01
 189 #define DOC_ASICMODE_POWERDOWN          0x02
 190 #define DOC_ASICMODE_MDWREN             0x04
 191 #define DOC_ASICMODE_BDETCT_RESET       0x08
 192 #define DOC_ASICMODE_RSTIN_RESET        0x10
 193 #define DOC_ASICMODE_RAM_WE             0x20
 194
 195 /*
 196  * Flash register : DOC_ECCCONF0
 197  */
 198 #define DOC_ECCCONF0_WRITE_MODE         0x0000
 199 #define DOC_ECCCONF0_READ_MODE          0x8000
 200 #define DOC_ECCCONF0_AUTO_ECC_ENABLE    0x4000
 201 #define DOC_ECCCONF0_HAMMING_ENABLE     0x1000
 202 #define DOC_ECCCONF0_BCH_ENABLE         0x0800
 203 #define DOC_ECCCONF0_DATA_BYTES_MASK    0x07ff
 204
 205 /*
 206  * Flash register : DOC_ECCCONF1
 207  */
 208 #define DOC_ECCCONF1_BCH_SYNDROM_ERR    0x80
 209 #define DOC_ECCCONF1_UNKOWN1            0x40
 210 #define DOC_ECCCONF1_PAGE_IS_WRITTEN    0x20
 211 #define DOC_ECCCONF1_UNKOWN3            0x10
 212 #define DOC_ECCCONF1_HAMMING_BITS_MASK  0x0f
 213
 214 /*
 215  * Flash register : DOC_PROTECTION
 216  */
 217 #define DOC_PROTECT_FOUNDRY_OTP_LOCK    0x01
 218 #define DOC_PROTECT_CUSTOMER_OTP_LOCK   0x02
 219 #define DOC_PROTECT_LOCK_INPUT          0x04
 220 #define DOC_PROTECT_STICKY_LOCK         0x08
 221 #define DOC_PROTECT_PROTECTION_ENABLED  0x10
 222 #define DOC_PROTECT_IPL_DOWNLOAD_LOCK   0x20
 223 #define DOC_PROTECT_PROTECTION_ERROR    0x80
 224
 225 /*
 226  * Flash register : DOC_DPS0_STATUS and DOC_DPS1_STATUS
 227  */
 228 #define DOC_DPS_OTP_PROTECTED           0x01
 229 #define DOC_DPS_READ_PROTECTED          0x02
 230 #define DOC_DPS_WRITE_PROTECTED         0x04
 231 #define DOC_DPS_HW_LOCK_ENABLED         0x08
 232 #define DOC_DPS_KEY_OK                  0x80
 233
 234 /*
 235  * Flash register : DOC_CONFIGURATION
 236  */
 237 #define DOC_CONF_IF_CFG                 0x80
 238 #define DOC_CONF_MAX_ID_MASK            0x30
 239 #define DOC_CONF_VCCQ_3V                0x01
 240
 241 /*
 242  * Flash register : DOC_READADDRESS
 243  */
 244 #define DOC_READADDR_INC                0x8000
 245 #define DOC_READADDR_ONE_BYTE           0x4000
 246 #define DOC_READADDR_ADDR_MASK          0x1fff
 247
 248 /*
 249  * Flash register : DOC_POWERMODE
 250  */
 251 #define DOC_POWERDOWN_READY             0x80
 252
 253 /*
 254  * Status of erase and write operation
 255  */
 256 #define DOC_PLANES_STATUS_FAIL          0x01
 257 #define DOC_PLANES_STATUS_PLANE0_KO     0x02
 258 #define DOC_PLANES_STATUS_PLANE1_KO     0x04
 259
 260 /*
 261  * DPS key management
 262  *
 263  * Each floor of docg3 has 2 protection areas: DPS0 and DPS1. These areas span
 264  * across block boundaries, and define whether these blocks can be read or
 265  * written.
 266  * The definition is dynamically stored in page 0 of blocks (2,3) for DPS0, and
 267  * page 0 of blocks (4,5) for DPS1.
 268  */
 269 #define DOC_LAYOUT_DPS_KEY_LENGTH       8
 270
 271 /**
 272  * struct docg3_cascade - Cascade of 1 to 4 docg3 chips
 273  * @floors: floors (ie. one physical docg3 chip is one floor)
 274  * @base: IO space to access all chips in the cascade
 275  * @bch: the BCH correcting control structure
 276  * @lock: lock to protect docg3 IO space from concurrent accesses
 277  */
 278 struct docg3_cascade {
 279         struct mtd_info *floors[DOC_MAX_NBFLOORS];
 280         void __iomem *base;
 281         struct bch_control *bch;
 282         struct mutex lock;
 283 };
 284
 285 /**
 286  * struct docg3 - DiskOnChip driver private data
 287  * @dev: the device currently under control
 288  * @cascade: the cascade this device belongs to
 289  * @device_id: number of the cascaded DoCG3 device (0, 1, 2 or 3)
 290  * @if_cfg: if true, reads are on 16bits, else reads are on 8bits
 291
 292  * @reliable: if 0, docg3 in normal mode, if 1 docg3 in fast mode, if 2 in
 293  *            reliable mode
 294  *            Fast mode implies more errors than normal mode.
 295  *            Reliable mode implies that page 2*n and 2*n+1 are clones.
 296  * @bbt: bad block table cache
 297  * @oob_write_ofs: offset of the MTD where this OOB should belong (ie. in next
 298  *                 page_write)
 299  * @oob_autoecc: if 1, use only bytes 0-7, 15, and fill the others with HW ECC
 300  *               if 0, use all the 16 bytes.
 301  * @oob_write_buf: prepared OOB for next page_write
 302  */
 303 struct docg3 {
 304         struct device *dev;
 305         struct docg3_cascade *cascade;
 306         unsigned int device_id:4;
 307         unsigned int if_cfg:1;
 308         unsigned int reliable:2;
 309         int max_block;
 310         u8 *bbt;
 311         loff_t oob_write_ofs;
 312         int oob_autoecc;
 313         u8 oob_write_buf[DOC_LAYOUT_OOB_SIZE];
 314 };
 315
 316 #define doc_err(fmt, arg...) dev_err(docg3->dev, (fmt), ## arg)
 317 #define doc_info(fmt, arg...) dev_info(docg3->dev, (fmt), ## arg)
 318 #define doc_dbg(fmt, arg...) dev_dbg(docg3->dev, (fmt), ## arg)
 319 #define doc_vdbg(fmt, arg...) dev_vdbg(docg3->dev, (fmt), ## arg)
 320
 321 #define DEBUGFS_RO_ATTR(name, show_fct) \
 322         static int name##_open(struct inode *inode, struct file *file) \
 323         { return single_open(file, show_fct, inode->i_private); }      \
 324         static const struct file_operations name##_fops = { \
 325                 .owner = THIS_MODULE, \
 326                 .open = name##_open, \
 327                 .llseek = seq_lseek, \
 328                 .read = seq_read, \
 329                 .release = single_release \
 330         };
 331 #endif
 332
 333 /*
 334  * Trace events part
 335  */
 336 #undef TRACE_SYSTEM
 337 #define TRACE_SYSTEM docg3
 338
 339 #if !defined(_MTD_DOCG3_TRACE) || defined(TRACE_HEADER_MULTI_READ)
 340 #define _MTD_DOCG3_TRACE
 341
 342 #include <linux/tracepoint.h>
 343
 344 TRACE_EVENT(docg3_io,
 345             TP_PROTO(int op, int width, u16 reg, int val),
 346             TP_ARGS(op, width, reg, val),
 347             TP_STRUCT__entry(
 348                     __field(int, op)
 349                     __field(unsigned char, width)
 350                     __field(u16, reg)
 351                     __field(int, val)),
 352             TP_fast_assign(
 353                     __entry->op = op;
 354                     __entry->width = width;
 355                     __entry->reg = reg;
 356                     __entry->val = val;),
 357             TP_printk("docg3: %s%02d reg=%04x, val=%04x",
 358                       __entry->op ? "write" : "read", __entry->width,
 359                       __entry->reg, __entry->val)
 360         );
 361 #endif
 362
 363 /* This part must be outside protection */
 364 #undef TRACE_INCLUDE_PATH
 365 #undef TRACE_INCLUDE_FILE
 366 #define TRACE_INCLUDE_PATH .
 367 #define TRACE_INCLUDE_FILE docg3
 368 #include <trace/define_trace.h>