drivers/pci/ats.c

   1 // SPDX-License-Identifier: GPL-2.0
   2 /*
   3  * PCI Express I/O Virtualization (IOV) support
   4  *   Address Translation Service 1.0
   5  *   Page Request Interface added by Joerg Roedel <joerg.roedel@amd.com>
   6  *   PASID support added by Joerg Roedel <joerg.roedel@amd.com>
   7  *
   8  * Copyright (C) 2009 Intel Corporation, Yu Zhao <yu.zhao@intel.com>
   9  * Copyright (C) 2011 Advanced Micro Devices,
  10  */
  11
  12 #include <linux/export.h>
  13 #include <linux/pci-ats.h>
  14 #include <linux/pci.h>
  15 #include <linux/slab.h>
  16
  17 #include "pci.h"
  18
  19 void pci_ats_init(struct pci_dev *dev)
  20 {
  21         int pos;
  22
  23         if (pci_ats_disabled())
  24                 return;
  25
  26         pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ATS);
  27         if (!pos)
  28                 return;
  29
  30         dev->ats_cap = pos;
  31 }
  32
  33 /**
  34  * pci_enable_ats - enable the ATS capability
  35  * @dev: the PCI device
  36  * @ps: the IOMMU page shift
  37  *
  38  * Returns 0 on success, or negative on failure.
  39  */
  40 int pci_enable_ats(struct pci_dev *dev, int ps)
  41 {
  42         u16 ctrl;
  43         struct pci_dev *pdev;
  44
  45         if (!dev->ats_cap)
  46                 return -EINVAL;
  47
  48         if (WARN_ON(dev->ats_enabled))
  49                 return -EBUSY;
  50
  51         if (ps < PCI_ATS_MIN_STU)
  52                 return -EINVAL;
  53
  54         /*
  55          * Note that enabling ATS on a VF fails unless it's already enabled
  56          * with the same STU on the PF.
  57          */
  58         ctrl = PCI_ATS_CTRL_ENABLE;
  59         if (dev->is_virtfn) {
  60                 pdev = pci_physfn(dev);
  61                 if (pdev->ats_stu != ps)
  62                         return -EINVAL;
  63
  64                 atomic_inc(&pdev->ats_ref_cnt);  /* count enabled VFs */
  65         } else {
  66                 dev->ats_stu = ps;
  67                 ctrl |= PCI_ATS_CTRL_STU(dev->ats_stu - PCI_ATS_MIN_STU);
  68         }
  69         pci_write_config_word(dev, dev->ats_cap + PCI_ATS_CTRL, ctrl);
  70
  71         dev->ats_enabled = 1;
  72         return 0;
  73 }
  74 EXPORT_SYMBOL_GPL(pci_enable_ats);
  75
  76 /**
  77  * pci_disable_ats - disable the ATS capability
  78  * @dev: the PCI device
  79  */
  80 void pci_disable_ats(struct pci_dev *dev)
  81 {
  82         struct pci_dev *pdev;
  83         u16 ctrl;
  84
  85         if (WARN_ON(!dev->ats_enabled))
  86                 return;
  87
  88         if (atomic_read(&dev->ats_ref_cnt))
  89                 return;         /* VFs still enabled */
  90
  91         if (dev->is_virtfn) {
  92                 pdev = pci_physfn(dev);
  93                 atomic_dec(&pdev->ats_ref_cnt);
  94         }
  95
  96         pci_read_config_word(dev, dev->ats_cap + PCI_ATS_CTRL, &ctrl);
  97         ctrl &= ~PCI_ATS_CTRL_ENABLE;
  98         pci_write_config_word(dev, dev->ats_cap + PCI_ATS_CTRL, ctrl);
  99
 100         dev->ats_enabled = 0;
 101 }
 102 EXPORT_SYMBOL_GPL(pci_disable_ats);
 103
 104 void pci_restore_ats_state(struct pci_dev *dev)
 105 {
 106         u16 ctrl;
 107
 108         if (!dev->ats_enabled)
 109                 return;
 110
 111         ctrl = PCI_ATS_CTRL_ENABLE;
 112         if (!dev->is_virtfn)
 113                 ctrl |= PCI_ATS_CTRL_STU(dev->ats_stu - PCI_ATS_MIN_STU);
 114         pci_write_config_word(dev, dev->ats_cap + PCI_ATS_CTRL, ctrl);
 115 }
 116 EXPORT_SYMBOL_GPL(pci_restore_ats_state);
 117
 118 /**
 119  * pci_ats_queue_depth - query the ATS Invalidate Queue Depth
 120  * @dev: the PCI device
 121  *
 122  * Returns the queue depth on success, or negative on failure.
 123  *
 124  * The ATS spec uses 0 in the Invalidate Queue Depth field to
 125  * indicate that the function can accept 32 Invalidate Request.
 126  * But here we use the `real' values (i.e. 1~32) for the Queue
 127  * Depth; and 0 indicates the function shares the Queue with
 128  * other functions (doesn't exclusively own a Queue).
 129  */
 130 int pci_ats_queue_depth(struct pci_dev *dev)
 131 {
 132         u16 cap;
 133
 134         if (!dev->ats_cap)
 135                 return -EINVAL;
 136
 137         if (dev->is_virtfn)
 138                 return 0;
 139
 140         pci_read_config_word(dev, dev->ats_cap + PCI_ATS_CAP, &cap);
 141         return PCI_ATS_CAP_QDEP(cap) ? PCI_ATS_CAP_QDEP(cap) : PCI_ATS_MAX_QDEP;
 142 }
 143 EXPORT_SYMBOL_GPL(pci_ats_queue_depth);
 144
 145 #ifdef CONFIG_PCI_PRI
 146 /**
 147  * pci_enable_pri - Enable PRI capability
 148  * @ pdev: PCI device structure
 149  *
 150  * Returns 0 on success, negative value on error
 151  */
 152 int pci_enable_pri(struct pci_dev *pdev, u32 reqs)
 153 {
 154         u16 control, status;
 155         u32 max_requests;
 156         int pos;
 157
 158         if (WARN_ON(pdev->pri_enabled))
 159                 return -EBUSY;
 160
 161         pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_PRI);
 162         if (!pos)
 163                 return -EINVAL;
 164
 165         pci_read_config_word(pdev, pos + PCI_PRI_STATUS, &status);
 166         if (!(status & PCI_PRI_STATUS_STOPPED))
 167                 return -EBUSY;
 168
 169         pci_read_config_dword(pdev, pos + PCI_PRI_MAX_REQ, &max_requests);
 170         reqs = min(max_requests, reqs);
 171         pdev->pri_reqs_alloc = reqs;
 172         pci_write_config_dword(pdev, pos + PCI_PRI_ALLOC_REQ, reqs);
 173
 174         control = PCI_PRI_CTRL_ENABLE;
 175         pci_write_config_word(pdev, pos + PCI_PRI_CTRL, control);
 176
 177         pdev->pri_enabled = 1;
 178
 179         return 0;
 180 }
 181 EXPORT_SYMBOL_GPL(pci_enable_pri);
 182
 183 /**
 184  * pci_disable_pri - Disable PRI capability
 185  * @pdev: PCI device structure
 186  *
 187  * Only clears the enabled-bit, regardless of its former value
 188  */
 189 void pci_disable_pri(struct pci_dev *pdev)
 190 {
 191         u16 control;
 192         int pos;
 193
 194         if (WARN_ON(!pdev->pri_enabled))
 195                 return;
 196
 197         pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_PRI);
 198         if (!pos)
 199                 return;
 200
 201         pci_read_config_word(pdev, pos + PCI_PRI_CTRL, &control);
 202         control &= ~PCI_PRI_CTRL_ENABLE;
 203         pci_write_config_word(pdev, pos + PCI_PRI_CTRL, control);
 204
 205         pdev->pri_enabled = 0;
 206 }
 207 EXPORT_SYMBOL_GPL(pci_disable_pri);
 208
 209 /**
 210  * pci_restore_pri_state - Restore PRI
 211  * @pdev: PCI device structure
 212  */
 213 void pci_restore_pri_state(struct pci_dev *pdev)
 214 {
 215         u16 control = PCI_PRI_CTRL_ENABLE;
 216         u32 reqs = pdev->pri_reqs_alloc;
 217         int pos;
 218
 219         if (!pdev->pri_enabled)
 220                 return;
 221
 222         pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_PRI);
 223         if (!pos)
 224                 return;
 225
 226         pci_write_config_dword(pdev, pos + PCI_PRI_ALLOC_REQ, reqs);
 227         pci_write_config_word(pdev, pos + PCI_PRI_CTRL, control);
 228 }
 229 EXPORT_SYMBOL_GPL(pci_restore_pri_state);
 230
 231 /**
 232  * pci_reset_pri - Resets device's PRI state
 233  * @pdev: PCI device structure
 234  *
 235  * The PRI capability must be disabled before this function is called.
 236  * Returns 0 on success, negative value on error.
 237  */
 238 int pci_reset_pri(struct pci_dev *pdev)
 239 {
 240         u16 control;
 241         int pos;
 242
 243         if (WARN_ON(pdev->pri_enabled))
 244                 return -EBUSY;
 245
 246         pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_PRI);
 247         if (!pos)
 248                 return -EINVAL;
 249
 250         control = PCI_PRI_CTRL_RESET;
 251         pci_write_config_word(pdev, pos + PCI_PRI_CTRL, control);
 252
 253         return 0;
 254 }
 255 EXPORT_SYMBOL_GPL(pci_reset_pri);
 256 #endif /* CONFIG_PCI_PRI */
 257
 258 #ifdef CONFIG_PCI_PASID
 259 /**
 260  * pci_enable_pasid - Enable the PASID capability
 261  * @pdev: PCI device structure
 262  * @features: Features to enable
 263  *
 264  * Returns 0 on success, negative value on error. This function checks
 265  * whether the features are actually supported by the device and returns
 266  * an error if not.
 267  */
 268 int pci_enable_pasid(struct pci_dev *pdev, int features)
 269 {
 270         u16 control, supported;
 271         int pos;
 272
 273         if (WARN_ON(pdev->pasid_enabled))
 274                 return -EBUSY;
 275
 276         if (!pdev->eetlp_prefix_path)
 277                 return -EINVAL;
 278
 279         pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_PASID);
 280         if (!pos)
 281                 return -EINVAL;
 282
 283         pci_read_config_word(pdev, pos + PCI_PASID_CAP, &supported);
 284         supported &= PCI_PASID_CAP_EXEC | PCI_PASID_CAP_PRIV;
 285
 286         /* User wants to enable anything unsupported? */
 287         if ((supported & features) != features)
 288                 return -EINVAL;
 289
 290         control = PCI_PASID_CTRL_ENABLE | features;
 291         pdev->pasid_features = features;
 292
 293         pci_write_config_word(pdev, pos + PCI_PASID_CTRL, control);
 294
 295         pdev->pasid_enabled = 1;
 296
 297         return 0;
 298 }
 299 EXPORT_SYMBOL_GPL(pci_enable_pasid);
 300
 301 /**
 302  * pci_disable_pasid - Disable the PASID capability
 303  * @pdev: PCI device structure
 304  */
 305 void pci_disable_pasid(struct pci_dev *pdev)
 306 {
 307         u16 control = 0;
 308         int pos;
 309
 310         if (WARN_ON(!pdev->pasid_enabled))
 311                 return;
 312
 313         pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_PASID);
 314         if (!pos)
 315                 return;
 316
 317         pci_write_config_word(pdev, pos + PCI_PASID_CTRL, control);
 318
 319         pdev->pasid_enabled = 0;
 320 }
 321 EXPORT_SYMBOL_GPL(pci_disable_pasid);
 322
 323 /**
 324  * pci_restore_pasid_state - Restore PASID capabilities
 325  * @pdev: PCI device structure
 326  */
 327 void pci_restore_pasid_state(struct pci_dev *pdev)
 328 {
 329         u16 control;
 330         int pos;
 331
 332         if (!pdev->pasid_enabled)
 333                 return;
 334
 335         pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_PASID);
 336         if (!pos)
 337                 return;
 338
 339         control = PCI_PASID_CTRL_ENABLE | pdev->pasid_features;
 340         pci_write_config_word(pdev, pos + PCI_PASID_CTRL, control);
 341 }
 342 EXPORT_SYMBOL_GPL(pci_restore_pasid_state);
 343
 344 /**
 345  * pci_pasid_features - Check which PASID features are supported
 346  * @pdev: PCI device structure
 347  *
 348  * Returns a negative value when no PASI capability is present.
 349  * Otherwise is returns a bitmask with supported features. Current
 350  * features reported are:
 351  * PCI_PASID_CAP_EXEC - Execute permission supported
 352  * PCI_PASID_CAP_PRIV - Privileged mode supported
 353  */
 354 int pci_pasid_features(struct pci_dev *pdev)
 355 {
 356         u16 supported;
 357         int pos;
 358
 359         pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_PASID);
 360         if (!pos)
 361                 return -EINVAL;
 362
 363         pci_read_config_word(pdev, pos + PCI_PASID_CAP, &supported);
 364
 365         supported &= PCI_PASID_CAP_EXEC | PCI_PASID_CAP_PRIV;
 366
 367         return supported;
 368 }
 369 EXPORT_SYMBOL_GPL(pci_pasid_features);
 370
 371 #define PASID_NUMBER_SHIFT      8
 372 #define PASID_NUMBER_MASK       (0x1f << PASID_NUMBER_SHIFT)
 373 /**
 374  * pci_max_pasid - Get maximum number of PASIDs supported by device
 375  * @pdev: PCI device structure
 376  *
 377  * Returns negative value when PASID capability is not present.
 378  * Otherwise it returns the numer of supported PASIDs.
 379  */
 380 int pci_max_pasids(struct pci_dev *pdev)
 381 {
 382         u16 supported;
 383         int pos;
 384
 385         pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_PASID);
 386         if (!pos)
 387                 return -EINVAL;
 388
 389         pci_read_config_word(pdev, pos + PCI_PASID_CAP, &supported);
 390
 391         supported = (supported & PASID_NUMBER_MASK) >> PASID_NUMBER_SHIFT;
 392
 393         return (1 << supported);
 394 }
 395 EXPORT_SYMBOL_GPL(pci_max_pasids);
 396 #endif /* CONFIG_PCI_PASID */