staging: rtl8188eu: rename HalSetBrateCfg() - style
[linux/fpc-iii.git] / drivers / s390 / char / tape_3590.c
blobcdcde18e72203eeeb07e975adb5aaa8ca0258199
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3 * tape device discipline for 3590 tapes.
5 * Copyright IBM Corp. 2001, 2009
6 * Author(s): Stefan Bader <shbader@de.ibm.com>
7 * Michael Holzheu <holzheu@de.ibm.com>
8 * Martin Schwidefsky <schwidefsky@de.ibm.com>
9 */
11 #define KMSG_COMPONENT "tape_3590"
12 #define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
14 #include <linux/module.h>
15 #include <linux/slab.h>
16 #include <linux/init.h>
17 #include <linux/bio.h>
18 #include <asm/ebcdic.h>
20 #define TAPE_DBF_AREA tape_3590_dbf
21 #define BUFSIZE 512 /* size of buffers for dynamic generated messages */
23 #include "tape.h"
24 #include "tape_std.h"
25 #include "tape_3590.h"
27 static struct workqueue_struct *tape_3590_wq;
30 * Pointer to debug area.
32 debug_info_t *TAPE_DBF_AREA = NULL;
33 EXPORT_SYMBOL(TAPE_DBF_AREA);
35 /*******************************************************************
36 * Error Recovery functions:
37 * - Read Opposite: implemented
38 * - Read Device (buffered) log: BRA
39 * - Read Library log: BRA
40 * - Swap Devices: BRA
41 * - Long Busy: implemented
42 * - Special Intercept: BRA
43 * - Read Alternate: implemented
44 *******************************************************************/
46 static const char *tape_3590_msg[TAPE_3590_MAX_MSG] = {
47 [0x00] = "",
48 [0x10] = "Lost Sense",
49 [0x11] = "Assigned Elsewhere",
50 [0x12] = "Allegiance Reset",
51 [0x13] = "Shared Access Violation",
52 [0x20] = "Command Reject",
53 [0x21] = "Configuration Error",
54 [0x22] = "Protection Exception",
55 [0x23] = "Write Protect",
56 [0x24] = "Write Length",
57 [0x25] = "Read-Only Format",
58 [0x31] = "Beginning of Partition",
59 [0x33] = "End of Partition",
60 [0x34] = "End of Data",
61 [0x35] = "Block not found",
62 [0x40] = "Device Intervention",
63 [0x41] = "Loader Intervention",
64 [0x42] = "Library Intervention",
65 [0x50] = "Write Error",
66 [0x51] = "Erase Error",
67 [0x52] = "Formatting Error",
68 [0x53] = "Read Error",
69 [0x54] = "Unsupported Format",
70 [0x55] = "No Formatting",
71 [0x56] = "Positioning lost",
72 [0x57] = "Read Length",
73 [0x60] = "Unsupported Medium",
74 [0x61] = "Medium Length Error",
75 [0x62] = "Medium removed",
76 [0x64] = "Load Check",
77 [0x65] = "Unload Check",
78 [0x70] = "Equipment Check",
79 [0x71] = "Bus out Check",
80 [0x72] = "Protocol Error",
81 [0x73] = "Interface Error",
82 [0x74] = "Overrun",
83 [0x75] = "Halt Signal",
84 [0x90] = "Device fenced",
85 [0x91] = "Device Path fenced",
86 [0xa0] = "Volume misplaced",
87 [0xa1] = "Volume inaccessible",
88 [0xa2] = "Volume in input",
89 [0xa3] = "Volume ejected",
90 [0xa4] = "All categories reserved",
91 [0xa5] = "Duplicate Volume",
92 [0xa6] = "Library Manager Offline",
93 [0xa7] = "Library Output Station full",
94 [0xa8] = "Vision System non-operational",
95 [0xa9] = "Library Manager Equipment Check",
96 [0xaa] = "Library Equipment Check",
97 [0xab] = "All Library Cells full",
98 [0xac] = "No Cleaner Volumes in Library",
99 [0xad] = "I/O Station door open",
100 [0xae] = "Subsystem environmental alert",
103 static int crypt_supported(struct tape_device *device)
105 return TAPE390_CRYPT_SUPPORTED(TAPE_3590_CRYPT_INFO(device));
108 static int crypt_enabled(struct tape_device *device)
110 return TAPE390_CRYPT_ON(TAPE_3590_CRYPT_INFO(device));
113 static void ext_to_int_kekl(struct tape390_kekl *in,
114 struct tape3592_kekl *out)
116 int len;
118 memset(out, 0, sizeof(*out));
119 if (in->type == TAPE390_KEKL_TYPE_HASH)
120 out->flags |= 0x40;
121 if (in->type_on_tape == TAPE390_KEKL_TYPE_HASH)
122 out->flags |= 0x80;
123 len = min(sizeof(out->label), strlen(in->label));
124 memcpy(out->label, in->label, len);
125 memset(out->label + len, ' ', sizeof(out->label) - len);
126 ASCEBC(out->label, sizeof(out->label));
129 static void int_to_ext_kekl(struct tape3592_kekl *in,
130 struct tape390_kekl *out)
132 memset(out, 0, sizeof(*out));
133 if(in->flags & 0x40)
134 out->type = TAPE390_KEKL_TYPE_HASH;
135 else
136 out->type = TAPE390_KEKL_TYPE_LABEL;
137 if(in->flags & 0x80)
138 out->type_on_tape = TAPE390_KEKL_TYPE_HASH;
139 else
140 out->type_on_tape = TAPE390_KEKL_TYPE_LABEL;
141 memcpy(out->label, in->label, sizeof(in->label));
142 EBCASC(out->label, sizeof(in->label));
143 strim(out->label);
146 static void int_to_ext_kekl_pair(struct tape3592_kekl_pair *in,
147 struct tape390_kekl_pair *out)
149 if (in->count == 0) {
150 out->kekl[0].type = TAPE390_KEKL_TYPE_NONE;
151 out->kekl[0].type_on_tape = TAPE390_KEKL_TYPE_NONE;
152 out->kekl[1].type = TAPE390_KEKL_TYPE_NONE;
153 out->kekl[1].type_on_tape = TAPE390_KEKL_TYPE_NONE;
154 } else if (in->count == 1) {
155 int_to_ext_kekl(&in->kekl[0], &out->kekl[0]);
156 out->kekl[1].type = TAPE390_KEKL_TYPE_NONE;
157 out->kekl[1].type_on_tape = TAPE390_KEKL_TYPE_NONE;
158 } else if (in->count == 2) {
159 int_to_ext_kekl(&in->kekl[0], &out->kekl[0]);
160 int_to_ext_kekl(&in->kekl[1], &out->kekl[1]);
161 } else {
162 printk("Invalid KEKL number: %d\n", in->count);
163 BUG();
167 static int check_ext_kekl(struct tape390_kekl *kekl)
169 if (kekl->type == TAPE390_KEKL_TYPE_NONE)
170 goto invalid;
171 if (kekl->type > TAPE390_KEKL_TYPE_HASH)
172 goto invalid;
173 if (kekl->type_on_tape == TAPE390_KEKL_TYPE_NONE)
174 goto invalid;
175 if (kekl->type_on_tape > TAPE390_KEKL_TYPE_HASH)
176 goto invalid;
177 if ((kekl->type == TAPE390_KEKL_TYPE_HASH) &&
178 (kekl->type_on_tape == TAPE390_KEKL_TYPE_LABEL))
179 goto invalid;
181 return 0;
182 invalid:
183 return -EINVAL;
186 static int check_ext_kekl_pair(struct tape390_kekl_pair *kekls)
188 if (check_ext_kekl(&kekls->kekl[0]))
189 goto invalid;
190 if (check_ext_kekl(&kekls->kekl[1]))
191 goto invalid;
193 return 0;
194 invalid:
195 return -EINVAL;
199 * Query KEKLs
201 static int tape_3592_kekl_query(struct tape_device *device,
202 struct tape390_kekl_pair *ext_kekls)
204 struct tape_request *request;
205 struct tape3592_kekl_query_order *order;
206 struct tape3592_kekl_query_data *int_kekls;
207 int rc;
209 DBF_EVENT(6, "tape3592_kekl_query\n");
210 int_kekls = kmalloc(sizeof(*int_kekls), GFP_KERNEL|GFP_DMA);
211 if (!int_kekls)
212 return -ENOMEM;
213 request = tape_alloc_request(2, sizeof(*order));
214 if (IS_ERR(request)) {
215 rc = PTR_ERR(request);
216 goto fail_malloc;
218 order = request->cpdata;
219 memset(order,0,sizeof(*order));
220 order->code = 0xe2;
221 order->max_count = 2;
222 request->op = TO_KEKL_QUERY;
223 tape_ccw_cc(request->cpaddr, PERF_SUBSYS_FUNC, sizeof(*order), order);
224 tape_ccw_end(request->cpaddr + 1, READ_SS_DATA, sizeof(*int_kekls),
225 int_kekls);
226 rc = tape_do_io(device, request);
227 if (rc)
228 goto fail_request;
229 int_to_ext_kekl_pair(&int_kekls->kekls, ext_kekls);
231 rc = 0;
232 fail_request:
233 tape_free_request(request);
234 fail_malloc:
235 kfree(int_kekls);
236 return rc;
240 * IOCTL: Query KEKLs
242 static int tape_3592_ioctl_kekl_query(struct tape_device *device,
243 unsigned long arg)
245 int rc;
246 struct tape390_kekl_pair *ext_kekls;
248 DBF_EVENT(6, "tape_3592_ioctl_kekl_query\n");
249 if (!crypt_supported(device))
250 return -ENOSYS;
251 if (!crypt_enabled(device))
252 return -EUNATCH;
253 ext_kekls = kmalloc(sizeof(*ext_kekls), GFP_KERNEL);
254 if (!ext_kekls)
255 return -ENOMEM;
256 rc = tape_3592_kekl_query(device, ext_kekls);
257 if (rc != 0)
258 goto fail;
259 if (copy_to_user((char __user *) arg, ext_kekls, sizeof(*ext_kekls))) {
260 rc = -EFAULT;
261 goto fail;
263 rc = 0;
264 fail:
265 kfree(ext_kekls);
266 return rc;
269 static int tape_3590_mttell(struct tape_device *device, int mt_count);
272 * Set KEKLs
274 static int tape_3592_kekl_set(struct tape_device *device,
275 struct tape390_kekl_pair *ext_kekls)
277 struct tape_request *request;
278 struct tape3592_kekl_set_order *order;
280 DBF_EVENT(6, "tape3592_kekl_set\n");
281 if (check_ext_kekl_pair(ext_kekls)) {
282 DBF_EVENT(6, "invalid kekls\n");
283 return -EINVAL;
285 if (tape_3590_mttell(device, 0) != 0)
286 return -EBADSLT;
287 request = tape_alloc_request(1, sizeof(*order));
288 if (IS_ERR(request))
289 return PTR_ERR(request);
290 order = request->cpdata;
291 memset(order, 0, sizeof(*order));
292 order->code = 0xe3;
293 order->kekls.count = 2;
294 ext_to_int_kekl(&ext_kekls->kekl[0], &order->kekls.kekl[0]);
295 ext_to_int_kekl(&ext_kekls->kekl[1], &order->kekls.kekl[1]);
296 request->op = TO_KEKL_SET;
297 tape_ccw_end(request->cpaddr, PERF_SUBSYS_FUNC, sizeof(*order), order);
299 return tape_do_io_free(device, request);
303 * IOCTL: Set KEKLs
305 static int tape_3592_ioctl_kekl_set(struct tape_device *device,
306 unsigned long arg)
308 int rc;
309 struct tape390_kekl_pair *ext_kekls;
311 DBF_EVENT(6, "tape_3592_ioctl_kekl_set\n");
312 if (!crypt_supported(device))
313 return -ENOSYS;
314 if (!crypt_enabled(device))
315 return -EUNATCH;
316 ext_kekls = memdup_user((char __user *)arg, sizeof(*ext_kekls));
317 if (IS_ERR(ext_kekls))
318 return PTR_ERR(ext_kekls);
319 rc = tape_3592_kekl_set(device, ext_kekls);
320 kfree(ext_kekls);
321 return rc;
325 * Enable encryption
327 static struct tape_request *__tape_3592_enable_crypt(struct tape_device *device)
329 struct tape_request *request;
330 char *data;
332 DBF_EVENT(6, "tape_3592_enable_crypt\n");
333 if (!crypt_supported(device))
334 return ERR_PTR(-ENOSYS);
335 request = tape_alloc_request(2, 72);
336 if (IS_ERR(request))
337 return request;
338 data = request->cpdata;
339 memset(data,0,72);
341 data[0] = 0x05;
342 data[36 + 0] = 0x03;
343 data[36 + 1] = 0x03;
344 data[36 + 4] = 0x40;
345 data[36 + 6] = 0x01;
346 data[36 + 14] = 0x2f;
347 data[36 + 18] = 0xc3;
348 data[36 + 35] = 0x72;
349 request->op = TO_CRYPT_ON;
350 tape_ccw_cc(request->cpaddr, MODE_SET_CB, 36, data);
351 tape_ccw_end(request->cpaddr + 1, MODE_SET_CB, 36, data + 36);
352 return request;
355 static int tape_3592_enable_crypt(struct tape_device *device)
357 struct tape_request *request;
359 request = __tape_3592_enable_crypt(device);
360 if (IS_ERR(request))
361 return PTR_ERR(request);
362 return tape_do_io_free(device, request);
365 static void tape_3592_enable_crypt_async(struct tape_device *device)
367 struct tape_request *request;
369 request = __tape_3592_enable_crypt(device);
370 if (!IS_ERR(request))
371 tape_do_io_async_free(device, request);
375 * Disable encryption
377 static struct tape_request *__tape_3592_disable_crypt(struct tape_device *device)
379 struct tape_request *request;
380 char *data;
382 DBF_EVENT(6, "tape_3592_disable_crypt\n");
383 if (!crypt_supported(device))
384 return ERR_PTR(-ENOSYS);
385 request = tape_alloc_request(2, 72);
386 if (IS_ERR(request))
387 return request;
388 data = request->cpdata;
389 memset(data,0,72);
391 data[0] = 0x05;
392 data[36 + 0] = 0x03;
393 data[36 + 1] = 0x03;
394 data[36 + 35] = 0x32;
396 request->op = TO_CRYPT_OFF;
397 tape_ccw_cc(request->cpaddr, MODE_SET_CB, 36, data);
398 tape_ccw_end(request->cpaddr + 1, MODE_SET_CB, 36, data + 36);
400 return request;
403 static int tape_3592_disable_crypt(struct tape_device *device)
405 struct tape_request *request;
407 request = __tape_3592_disable_crypt(device);
408 if (IS_ERR(request))
409 return PTR_ERR(request);
410 return tape_do_io_free(device, request);
413 static void tape_3592_disable_crypt_async(struct tape_device *device)
415 struct tape_request *request;
417 request = __tape_3592_disable_crypt(device);
418 if (!IS_ERR(request))
419 tape_do_io_async_free(device, request);
423 * IOCTL: Set encryption status
425 static int tape_3592_ioctl_crypt_set(struct tape_device *device,
426 unsigned long arg)
428 struct tape390_crypt_info info;
430 DBF_EVENT(6, "tape_3592_ioctl_crypt_set\n");
431 if (!crypt_supported(device))
432 return -ENOSYS;
433 if (copy_from_user(&info, (char __user *)arg, sizeof(info)))
434 return -EFAULT;
435 if (info.status & ~TAPE390_CRYPT_ON_MASK)
436 return -EINVAL;
437 if (info.status & TAPE390_CRYPT_ON_MASK)
438 return tape_3592_enable_crypt(device);
439 else
440 return tape_3592_disable_crypt(device);
443 static int tape_3590_sense_medium(struct tape_device *device);
446 * IOCTL: Query enryption status
448 static int tape_3592_ioctl_crypt_query(struct tape_device *device,
449 unsigned long arg)
451 DBF_EVENT(6, "tape_3592_ioctl_crypt_query\n");
452 if (!crypt_supported(device))
453 return -ENOSYS;
454 tape_3590_sense_medium(device);
455 if (copy_to_user((char __user *) arg, &TAPE_3590_CRYPT_INFO(device),
456 sizeof(TAPE_3590_CRYPT_INFO(device))))
457 return -EFAULT;
458 else
459 return 0;
463 * 3590 IOCTL Overload
465 static int
466 tape_3590_ioctl(struct tape_device *device, unsigned int cmd, unsigned long arg)
468 switch (cmd) {
469 case TAPE390_DISPLAY: {
470 struct display_struct disp;
472 if (copy_from_user(&disp, (char __user *) arg, sizeof(disp)))
473 return -EFAULT;
475 return tape_std_display(device, &disp);
477 case TAPE390_KEKL_SET:
478 return tape_3592_ioctl_kekl_set(device, arg);
479 case TAPE390_KEKL_QUERY:
480 return tape_3592_ioctl_kekl_query(device, arg);
481 case TAPE390_CRYPT_SET:
482 return tape_3592_ioctl_crypt_set(device, arg);
483 case TAPE390_CRYPT_QUERY:
484 return tape_3592_ioctl_crypt_query(device, arg);
485 default:
486 return -EINVAL; /* no additional ioctls */
491 * SENSE Medium: Get Sense data about medium state
493 static int tape_3590_sense_medium(struct tape_device *device)
495 struct tape_request *request;
497 request = tape_alloc_request(1, 128);
498 if (IS_ERR(request))
499 return PTR_ERR(request);
500 request->op = TO_MSEN;
501 tape_ccw_end(request->cpaddr, MEDIUM_SENSE, 128, request->cpdata);
502 return tape_do_io_free(device, request);
505 static void tape_3590_sense_medium_async(struct tape_device *device)
507 struct tape_request *request;
509 request = tape_alloc_request(1, 128);
510 if (IS_ERR(request))
511 return;
512 request->op = TO_MSEN;
513 tape_ccw_end(request->cpaddr, MEDIUM_SENSE, 128, request->cpdata);
514 tape_do_io_async_free(device, request);
518 * MTTELL: Tell block. Return the number of block relative to current file.
520 static int
521 tape_3590_mttell(struct tape_device *device, int mt_count)
523 __u64 block_id;
524 int rc;
526 rc = tape_std_read_block_id(device, &block_id);
527 if (rc)
528 return rc;
529 return block_id >> 32;
533 * MTSEEK: seek to the specified block.
535 static int
536 tape_3590_mtseek(struct tape_device *device, int count)
538 struct tape_request *request;
540 DBF_EVENT(6, "xsee id: %x\n", count);
541 request = tape_alloc_request(3, 4);
542 if (IS_ERR(request))
543 return PTR_ERR(request);
544 request->op = TO_LBL;
545 tape_ccw_cc(request->cpaddr, MODE_SET_DB, 1, device->modeset_byte);
546 *(__u32 *) request->cpdata = count;
547 tape_ccw_cc(request->cpaddr + 1, LOCATE, 4, request->cpdata);
548 tape_ccw_end(request->cpaddr + 2, NOP, 0, NULL);
549 return tape_do_io_free(device, request);
553 * Read Opposite Error Recovery Function:
554 * Used, when Read Forward does not work
556 static void
557 tape_3590_read_opposite(struct tape_device *device,
558 struct tape_request *request)
560 struct tape_3590_disc_data *data;
563 * We have allocated 4 ccws in tape_std_read, so we can now
564 * transform the request to a read backward, followed by a
565 * forward space block.
567 request->op = TO_RBA;
568 tape_ccw_cc(request->cpaddr, MODE_SET_DB, 1, device->modeset_byte);
569 data = device->discdata;
570 tape_ccw_cc_idal(request->cpaddr + 1, data->read_back_op,
571 device->char_data.idal_buf);
572 tape_ccw_cc(request->cpaddr + 2, FORSPACEBLOCK, 0, NULL);
573 tape_ccw_end(request->cpaddr + 3, NOP, 0, NULL);
574 DBF_EVENT(6, "xrop ccwg\n");
578 * Read Attention Msg
579 * This should be done after an interrupt with attention bit (0x80)
580 * in device state.
582 * After a "read attention message" request there are two possible
583 * results:
585 * 1. A unit check is presented, when attention sense is present (e.g. when
586 * a medium has been unloaded). The attention sense comes then
587 * together with the unit check. The recovery action is either "retry"
588 * (in case there is an attention message pending) or "permanent error".
590 * 2. The attention msg is written to the "read subsystem data" buffer.
591 * In this case we probably should print it to the console.
593 static void tape_3590_read_attmsg_async(struct tape_device *device)
595 struct tape_request *request;
596 char *buf;
598 request = tape_alloc_request(3, 4096);
599 if (IS_ERR(request))
600 return;
601 request->op = TO_READ_ATTMSG;
602 buf = request->cpdata;
603 buf[0] = PREP_RD_SS_DATA;
604 buf[6] = RD_ATTMSG; /* read att msg */
605 tape_ccw_cc(request->cpaddr, PERFORM_SS_FUNC, 12, buf);
606 tape_ccw_cc(request->cpaddr + 1, READ_SS_DATA, 4096 - 12, buf + 12);
607 tape_ccw_end(request->cpaddr + 2, NOP, 0, NULL);
608 tape_do_io_async_free(device, request);
612 * These functions are used to schedule follow-up actions from within an
613 * interrupt context (like unsolicited interrupts).
614 * Note: the work handler is called by the system work queue. The tape
615 * commands started by the handler need to be asynchrounous, otherwise
616 * a deadlock can occur e.g. in case of a deferred cc=1 (see __tape_do_irq).
618 struct work_handler_data {
619 struct tape_device *device;
620 enum tape_op op;
621 struct work_struct work;
624 static void
625 tape_3590_work_handler(struct work_struct *work)
627 struct work_handler_data *p =
628 container_of(work, struct work_handler_data, work);
630 switch (p->op) {
631 case TO_MSEN:
632 tape_3590_sense_medium_async(p->device);
633 break;
634 case TO_READ_ATTMSG:
635 tape_3590_read_attmsg_async(p->device);
636 break;
637 case TO_CRYPT_ON:
638 tape_3592_enable_crypt_async(p->device);
639 break;
640 case TO_CRYPT_OFF:
641 tape_3592_disable_crypt_async(p->device);
642 break;
643 default:
644 DBF_EVENT(3, "T3590: work handler undefined for "
645 "operation 0x%02x\n", p->op);
647 tape_put_device(p->device);
648 kfree(p);
651 static int
652 tape_3590_schedule_work(struct tape_device *device, enum tape_op op)
654 struct work_handler_data *p;
656 if ((p = kzalloc(sizeof(*p), GFP_ATOMIC)) == NULL)
657 return -ENOMEM;
659 INIT_WORK(&p->work, tape_3590_work_handler);
661 p->device = tape_get_device(device);
662 p->op = op;
664 queue_work(tape_3590_wq, &p->work);
665 return 0;
668 static void tape_3590_med_state_set(struct tape_device *device,
669 struct tape_3590_med_sense *sense)
671 struct tape390_crypt_info *c_info;
673 c_info = &TAPE_3590_CRYPT_INFO(device);
675 DBF_EVENT(6, "medium state: %x:%x\n", sense->macst, sense->masst);
676 switch (sense->macst) {
677 case 0x04:
678 case 0x05:
679 case 0x06:
680 tape_med_state_set(device, MS_UNLOADED);
681 TAPE_3590_CRYPT_INFO(device).medium_status = 0;
682 return;
683 case 0x08:
684 case 0x09:
685 tape_med_state_set(device, MS_LOADED);
686 break;
687 default:
688 tape_med_state_set(device, MS_UNKNOWN);
689 return;
691 c_info->medium_status |= TAPE390_MEDIUM_LOADED_MASK;
692 if (sense->flags & MSENSE_CRYPT_MASK) {
693 DBF_EVENT(6, "Medium is encrypted (%04x)\n", sense->flags);
694 c_info->medium_status |= TAPE390_MEDIUM_ENCRYPTED_MASK;
695 } else {
696 DBF_EVENT(6, "Medium is not encrypted %04x\n", sense->flags);
697 c_info->medium_status &= ~TAPE390_MEDIUM_ENCRYPTED_MASK;
702 * The done handler is called at device/channel end and wakes up the sleeping
703 * process
705 static int
706 tape_3590_done(struct tape_device *device, struct tape_request *request)
709 DBF_EVENT(6, "%s done\n", tape_op_verbose[request->op]);
711 switch (request->op) {
712 case TO_BSB:
713 case TO_BSF:
714 case TO_DSE:
715 case TO_FSB:
716 case TO_FSF:
717 case TO_LBL:
718 case TO_RFO:
719 case TO_RBA:
720 case TO_REW:
721 case TO_WRI:
722 case TO_WTM:
723 case TO_BLOCK:
724 case TO_LOAD:
725 tape_med_state_set(device, MS_LOADED);
726 break;
727 case TO_RUN:
728 tape_med_state_set(device, MS_UNLOADED);
729 tape_3590_schedule_work(device, TO_CRYPT_OFF);
730 break;
731 case TO_MSEN:
732 tape_3590_med_state_set(device, request->cpdata);
733 break;
734 case TO_CRYPT_ON:
735 TAPE_3590_CRYPT_INFO(device).status
736 |= TAPE390_CRYPT_ON_MASK;
737 *(device->modeset_byte) |= 0x03;
738 break;
739 case TO_CRYPT_OFF:
740 TAPE_3590_CRYPT_INFO(device).status
741 &= ~TAPE390_CRYPT_ON_MASK;
742 *(device->modeset_byte) &= ~0x03;
743 break;
744 case TO_RBI: /* RBI seems to succeed even without medium loaded. */
745 case TO_NOP: /* Same to NOP. */
746 case TO_READ_CONFIG:
747 case TO_READ_ATTMSG:
748 case TO_DIS:
749 case TO_ASSIGN:
750 case TO_UNASSIGN:
751 case TO_SIZE:
752 case TO_KEKL_SET:
753 case TO_KEKL_QUERY:
754 case TO_RDC:
755 break;
757 return TAPE_IO_SUCCESS;
761 * This function is called, when error recovery was successful
763 static inline int
764 tape_3590_erp_succeded(struct tape_device *device, struct tape_request *request)
766 DBF_EVENT(3, "Error Recovery successful for %s\n",
767 tape_op_verbose[request->op]);
768 return tape_3590_done(device, request);
772 * This function is called, when error recovery was not successful
774 static inline int
775 tape_3590_erp_failed(struct tape_device *device, struct tape_request *request,
776 struct irb *irb, int rc)
778 DBF_EVENT(3, "Error Recovery failed for %s\n",
779 tape_op_verbose[request->op]);
780 tape_dump_sense_dbf(device, request, irb);
781 return rc;
785 * Error Recovery do retry
787 static inline int
788 tape_3590_erp_retry(struct tape_device *device, struct tape_request *request,
789 struct irb *irb)
791 DBF_EVENT(2, "Retry: %s\n", tape_op_verbose[request->op]);
792 tape_dump_sense_dbf(device, request, irb);
793 return TAPE_IO_RETRY;
797 * Handle unsolicited interrupts
799 static int
800 tape_3590_unsolicited_irq(struct tape_device *device, struct irb *irb)
802 if (irb->scsw.cmd.dstat == DEV_STAT_CHN_END)
803 /* Probably result of halt ssch */
804 return TAPE_IO_PENDING;
805 else if (irb->scsw.cmd.dstat == 0x85)
806 /* Device Ready */
807 DBF_EVENT(3, "unsol.irq! tape ready: %08x\n", device->cdev_id);
808 else if (irb->scsw.cmd.dstat & DEV_STAT_ATTENTION) {
809 tape_3590_schedule_work(device, TO_READ_ATTMSG);
810 } else {
811 DBF_EVENT(3, "unsol.irq! dev end: %08x\n", device->cdev_id);
812 tape_dump_sense_dbf(device, NULL, irb);
814 /* check medium state */
815 tape_3590_schedule_work(device, TO_MSEN);
816 return TAPE_IO_SUCCESS;
820 * Basic Recovery routine
822 static int
823 tape_3590_erp_basic(struct tape_device *device, struct tape_request *request,
824 struct irb *irb, int rc)
826 struct tape_3590_sense *sense;
828 sense = (struct tape_3590_sense *) irb->ecw;
830 switch (sense->bra) {
831 case SENSE_BRA_PER:
832 return tape_3590_erp_failed(device, request, irb, rc);
833 case SENSE_BRA_CONT:
834 return tape_3590_erp_succeded(device, request);
835 case SENSE_BRA_RE:
836 return tape_3590_erp_retry(device, request, irb);
837 case SENSE_BRA_DRE:
838 return tape_3590_erp_failed(device, request, irb, rc);
839 default:
840 BUG();
841 return TAPE_IO_STOP;
846 * RDL: Read Device (buffered) log
848 static int
849 tape_3590_erp_read_buf_log(struct tape_device *device,
850 struct tape_request *request, struct irb *irb)
853 * We just do the basic error recovery at the moment (retry).
854 * Perhaps in the future, we read the log and dump it somewhere...
856 return tape_3590_erp_basic(device, request, irb, -EIO);
860 * SWAP: Swap Devices
862 static int
863 tape_3590_erp_swap(struct tape_device *device, struct tape_request *request,
864 struct irb *irb)
867 * This error recovery should swap the tapes
868 * if the original has a problem. The operation
869 * should proceed with the new tape... this
870 * should probably be done in user space!
872 dev_warn (&device->cdev->dev, "The tape medium must be loaded into a "
873 "different tape unit\n");
874 return tape_3590_erp_basic(device, request, irb, -EIO);
878 * LBY: Long Busy
880 static int
881 tape_3590_erp_long_busy(struct tape_device *device,
882 struct tape_request *request, struct irb *irb)
884 DBF_EVENT(6, "Device is busy\n");
885 return TAPE_IO_LONG_BUSY;
889 * SPI: Special Intercept
891 static int
892 tape_3590_erp_special_interrupt(struct tape_device *device,
893 struct tape_request *request, struct irb *irb)
895 return tape_3590_erp_basic(device, request, irb, -EIO);
899 * RDA: Read Alternate
901 static int
902 tape_3590_erp_read_alternate(struct tape_device *device,
903 struct tape_request *request, struct irb *irb)
905 struct tape_3590_disc_data *data;
908 * The issued Read Backward or Read Previous command is not
909 * supported by the device
910 * The recovery action should be to issue another command:
911 * Read Revious: if Read Backward is not supported
912 * Read Backward: if Read Previous is not supported
914 data = device->discdata;
915 if (data->read_back_op == READ_PREVIOUS) {
916 DBF_EVENT(2, "(%08x): No support for READ_PREVIOUS command\n",
917 device->cdev_id);
918 data->read_back_op = READ_BACKWARD;
919 } else {
920 DBF_EVENT(2, "(%08x): No support for READ_BACKWARD command\n",
921 device->cdev_id);
922 data->read_back_op = READ_PREVIOUS;
924 tape_3590_read_opposite(device, request);
925 return tape_3590_erp_retry(device, request, irb);
929 * Error Recovery read opposite
931 static int
932 tape_3590_erp_read_opposite(struct tape_device *device,
933 struct tape_request *request, struct irb *irb)
935 switch (request->op) {
936 case TO_RFO:
938 * We did read forward, but the data could not be read.
939 * We will read backward and then skip forward again.
941 tape_3590_read_opposite(device, request);
942 return tape_3590_erp_retry(device, request, irb);
943 case TO_RBA:
944 /* We tried to read forward and backward, but hat no success */
945 return tape_3590_erp_failed(device, request, irb, -EIO);
946 break;
947 default:
948 return tape_3590_erp_failed(device, request, irb, -EIO);
953 * Print an MIM (Media Information Message) (message code f0)
955 static void
956 tape_3590_print_mim_msg_f0(struct tape_device *device, struct irb *irb)
958 struct tape_3590_sense *sense;
959 char *exception, *service;
961 exception = kmalloc(BUFSIZE, GFP_ATOMIC);
962 service = kmalloc(BUFSIZE, GFP_ATOMIC);
964 if (!exception || !service)
965 goto out_nomem;
967 sense = (struct tape_3590_sense *) irb->ecw;
968 /* Exception Message */
969 switch (sense->fmt.f70.emc) {
970 case 0x02:
971 snprintf(exception, BUFSIZE, "Data degraded");
972 break;
973 case 0x03:
974 snprintf(exception, BUFSIZE, "Data degraded in partion %i",
975 sense->fmt.f70.mp);
976 break;
977 case 0x04:
978 snprintf(exception, BUFSIZE, "Medium degraded");
979 break;
980 case 0x05:
981 snprintf(exception, BUFSIZE, "Medium degraded in partition %i",
982 sense->fmt.f70.mp);
983 break;
984 case 0x06:
985 snprintf(exception, BUFSIZE, "Block 0 Error");
986 break;
987 case 0x07:
988 snprintf(exception, BUFSIZE, "Medium Exception 0x%02x",
989 sense->fmt.f70.md);
990 break;
991 default:
992 snprintf(exception, BUFSIZE, "0x%02x",
993 sense->fmt.f70.emc);
994 break;
996 /* Service Message */
997 switch (sense->fmt.f70.smc) {
998 case 0x02:
999 snprintf(service, BUFSIZE, "Reference Media maintenance "
1000 "procedure %i", sense->fmt.f70.md);
1001 break;
1002 default:
1003 snprintf(service, BUFSIZE, "0x%02x",
1004 sense->fmt.f70.smc);
1005 break;
1008 dev_warn (&device->cdev->dev, "Tape media information: exception %s, "
1009 "service %s\n", exception, service);
1011 out_nomem:
1012 kfree(exception);
1013 kfree(service);
1017 * Print an I/O Subsystem Service Information Message (message code f1)
1019 static void
1020 tape_3590_print_io_sim_msg_f1(struct tape_device *device, struct irb *irb)
1022 struct tape_3590_sense *sense;
1023 char *exception, *service;
1025 exception = kmalloc(BUFSIZE, GFP_ATOMIC);
1026 service = kmalloc(BUFSIZE, GFP_ATOMIC);
1028 if (!exception || !service)
1029 goto out_nomem;
1031 sense = (struct tape_3590_sense *) irb->ecw;
1032 /* Exception Message */
1033 switch (sense->fmt.f71.emc) {
1034 case 0x01:
1035 snprintf(exception, BUFSIZE, "Effect of failure is unknown");
1036 break;
1037 case 0x02:
1038 snprintf(exception, BUFSIZE, "CU Exception - no performance "
1039 "impact");
1040 break;
1041 case 0x03:
1042 snprintf(exception, BUFSIZE, "CU Exception on channel "
1043 "interface 0x%02x", sense->fmt.f71.md[0]);
1044 break;
1045 case 0x04:
1046 snprintf(exception, BUFSIZE, "CU Exception on device path "
1047 "0x%02x", sense->fmt.f71.md[0]);
1048 break;
1049 case 0x05:
1050 snprintf(exception, BUFSIZE, "CU Exception on library path "
1051 "0x%02x", sense->fmt.f71.md[0]);
1052 break;
1053 case 0x06:
1054 snprintf(exception, BUFSIZE, "CU Exception on node 0x%02x",
1055 sense->fmt.f71.md[0]);
1056 break;
1057 case 0x07:
1058 snprintf(exception, BUFSIZE, "CU Exception on partition "
1059 "0x%02x", sense->fmt.f71.md[0]);
1060 break;
1061 default:
1062 snprintf(exception, BUFSIZE, "0x%02x",
1063 sense->fmt.f71.emc);
1065 /* Service Message */
1066 switch (sense->fmt.f71.smc) {
1067 case 0x01:
1068 snprintf(service, BUFSIZE, "Repair impact is unknown");
1069 break;
1070 case 0x02:
1071 snprintf(service, BUFSIZE, "Repair will not impact cu "
1072 "performance");
1073 break;
1074 case 0x03:
1075 if (sense->fmt.f71.mdf == 0)
1076 snprintf(service, BUFSIZE, "Repair will disable node "
1077 "0x%x on CU", sense->fmt.f71.md[1]);
1078 else
1079 snprintf(service, BUFSIZE, "Repair will disable "
1080 "nodes (0x%x-0x%x) on CU", sense->fmt.f71.md[1],
1081 sense->fmt.f71.md[2]);
1082 break;
1083 case 0x04:
1084 if (sense->fmt.f71.mdf == 0)
1085 snprintf(service, BUFSIZE, "Repair will disable "
1086 "channel path 0x%x on CU",
1087 sense->fmt.f71.md[1]);
1088 else
1089 snprintf(service, BUFSIZE, "Repair will disable channel"
1090 " paths (0x%x-0x%x) on CU",
1091 sense->fmt.f71.md[1], sense->fmt.f71.md[2]);
1092 break;
1093 case 0x05:
1094 if (sense->fmt.f71.mdf == 0)
1095 snprintf(service, BUFSIZE, "Repair will disable device"
1096 " path 0x%x on CU", sense->fmt.f71.md[1]);
1097 else
1098 snprintf(service, BUFSIZE, "Repair will disable device"
1099 " paths (0x%x-0x%x) on CU",
1100 sense->fmt.f71.md[1], sense->fmt.f71.md[2]);
1101 break;
1102 case 0x06:
1103 if (sense->fmt.f71.mdf == 0)
1104 snprintf(service, BUFSIZE, "Repair will disable "
1105 "library path 0x%x on CU",
1106 sense->fmt.f71.md[1]);
1107 else
1108 snprintf(service, BUFSIZE, "Repair will disable "
1109 "library paths (0x%x-0x%x) on CU",
1110 sense->fmt.f71.md[1], sense->fmt.f71.md[2]);
1111 break;
1112 case 0x07:
1113 snprintf(service, BUFSIZE, "Repair will disable access to CU");
1114 break;
1115 default:
1116 snprintf(service, BUFSIZE, "0x%02x",
1117 sense->fmt.f71.smc);
1120 dev_warn (&device->cdev->dev, "I/O subsystem information: exception"
1121 " %s, service %s\n", exception, service);
1122 out_nomem:
1123 kfree(exception);
1124 kfree(service);
1128 * Print an Device Subsystem Service Information Message (message code f2)
1130 static void
1131 tape_3590_print_dev_sim_msg_f2(struct tape_device *device, struct irb *irb)
1133 struct tape_3590_sense *sense;
1134 char *exception, *service;
1136 exception = kmalloc(BUFSIZE, GFP_ATOMIC);
1137 service = kmalloc(BUFSIZE, GFP_ATOMIC);
1139 if (!exception || !service)
1140 goto out_nomem;
1142 sense = (struct tape_3590_sense *) irb->ecw;
1143 /* Exception Message */
1144 switch (sense->fmt.f71.emc) {
1145 case 0x01:
1146 snprintf(exception, BUFSIZE, "Effect of failure is unknown");
1147 break;
1148 case 0x02:
1149 snprintf(exception, BUFSIZE, "DV Exception - no performance"
1150 " impact");
1151 break;
1152 case 0x03:
1153 snprintf(exception, BUFSIZE, "DV Exception on channel "
1154 "interface 0x%02x", sense->fmt.f71.md[0]);
1155 break;
1156 case 0x04:
1157 snprintf(exception, BUFSIZE, "DV Exception on loader 0x%02x",
1158 sense->fmt.f71.md[0]);
1159 break;
1160 case 0x05:
1161 snprintf(exception, BUFSIZE, "DV Exception on message display"
1162 " 0x%02x", sense->fmt.f71.md[0]);
1163 break;
1164 case 0x06:
1165 snprintf(exception, BUFSIZE, "DV Exception in tape path");
1166 break;
1167 case 0x07:
1168 snprintf(exception, BUFSIZE, "DV Exception in drive");
1169 break;
1170 default:
1171 snprintf(exception, BUFSIZE, "0x%02x",
1172 sense->fmt.f71.emc);
1174 /* Service Message */
1175 switch (sense->fmt.f71.smc) {
1176 case 0x01:
1177 snprintf(service, BUFSIZE, "Repair impact is unknown");
1178 break;
1179 case 0x02:
1180 snprintf(service, BUFSIZE, "Repair will not impact device "
1181 "performance");
1182 break;
1183 case 0x03:
1184 if (sense->fmt.f71.mdf == 0)
1185 snprintf(service, BUFSIZE, "Repair will disable "
1186 "channel path 0x%x on DV",
1187 sense->fmt.f71.md[1]);
1188 else
1189 snprintf(service, BUFSIZE, "Repair will disable "
1190 "channel path (0x%x-0x%x) on DV",
1191 sense->fmt.f71.md[1], sense->fmt.f71.md[2]);
1192 break;
1193 case 0x04:
1194 if (sense->fmt.f71.mdf == 0)
1195 snprintf(service, BUFSIZE, "Repair will disable "
1196 "interface 0x%x on DV", sense->fmt.f71.md[1]);
1197 else
1198 snprintf(service, BUFSIZE, "Repair will disable "
1199 "interfaces (0x%x-0x%x) on DV",
1200 sense->fmt.f71.md[1], sense->fmt.f71.md[2]);
1201 break;
1202 case 0x05:
1203 if (sense->fmt.f71.mdf == 0)
1204 snprintf(service, BUFSIZE, "Repair will disable loader"
1205 " 0x%x on DV", sense->fmt.f71.md[1]);
1206 else
1207 snprintf(service, BUFSIZE, "Repair will disable loader"
1208 " (0x%x-0x%x) on DV",
1209 sense->fmt.f71.md[1], sense->fmt.f71.md[2]);
1210 break;
1211 case 0x07:
1212 snprintf(service, BUFSIZE, "Repair will disable access to DV");
1213 break;
1214 case 0x08:
1215 if (sense->fmt.f71.mdf == 0)
1216 snprintf(service, BUFSIZE, "Repair will disable "
1217 "message display 0x%x on DV",
1218 sense->fmt.f71.md[1]);
1219 else
1220 snprintf(service, BUFSIZE, "Repair will disable "
1221 "message displays (0x%x-0x%x) on DV",
1222 sense->fmt.f71.md[1], sense->fmt.f71.md[2]);
1223 break;
1224 case 0x09:
1225 snprintf(service, BUFSIZE, "Clean DV");
1226 break;
1227 default:
1228 snprintf(service, BUFSIZE, "0x%02x",
1229 sense->fmt.f71.smc);
1232 dev_warn (&device->cdev->dev, "Device subsystem information: exception"
1233 " %s, service %s\n", exception, service);
1234 out_nomem:
1235 kfree(exception);
1236 kfree(service);
1240 * Print standard ERA Message
1242 static void
1243 tape_3590_print_era_msg(struct tape_device *device, struct irb *irb)
1245 struct tape_3590_sense *sense;
1247 sense = (struct tape_3590_sense *) irb->ecw;
1248 if (sense->mc == 0)
1249 return;
1250 if ((sense->mc > 0) && (sense->mc < TAPE_3590_MAX_MSG)) {
1251 if (tape_3590_msg[sense->mc] != NULL)
1252 dev_warn (&device->cdev->dev, "The tape unit has "
1253 "issued sense message %s\n",
1254 tape_3590_msg[sense->mc]);
1255 else
1256 dev_warn (&device->cdev->dev, "The tape unit has "
1257 "issued an unknown sense message code 0x%x\n",
1258 sense->mc);
1259 return;
1261 if (sense->mc == 0xf0) {
1262 /* Standard Media Information Message */
1263 dev_warn (&device->cdev->dev, "MIM SEV=%i, MC=%02x, ES=%x/%x, "
1264 "RC=%02x-%04x-%02x\n", sense->fmt.f70.sev, sense->mc,
1265 sense->fmt.f70.emc, sense->fmt.f70.smc,
1266 sense->fmt.f70.refcode, sense->fmt.f70.mid,
1267 sense->fmt.f70.fid);
1268 tape_3590_print_mim_msg_f0(device, irb);
1269 return;
1271 if (sense->mc == 0xf1) {
1272 /* Standard I/O Subsystem Service Information Message */
1273 dev_warn (&device->cdev->dev, "IOSIM SEV=%i, DEVTYPE=3590/%02x,"
1274 " MC=%02x, ES=%x/%x, REF=0x%04x-0x%04x-0x%04x\n",
1275 sense->fmt.f71.sev, device->cdev->id.dev_model,
1276 sense->mc, sense->fmt.f71.emc, sense->fmt.f71.smc,
1277 sense->fmt.f71.refcode1, sense->fmt.f71.refcode2,
1278 sense->fmt.f71.refcode3);
1279 tape_3590_print_io_sim_msg_f1(device, irb);
1280 return;
1282 if (sense->mc == 0xf2) {
1283 /* Standard Device Service Information Message */
1284 dev_warn (&device->cdev->dev, "DEVSIM SEV=%i, DEVTYPE=3590/%02x"
1285 ", MC=%02x, ES=%x/%x, REF=0x%04x-0x%04x-0x%04x\n",
1286 sense->fmt.f71.sev, device->cdev->id.dev_model,
1287 sense->mc, sense->fmt.f71.emc, sense->fmt.f71.smc,
1288 sense->fmt.f71.refcode1, sense->fmt.f71.refcode2,
1289 sense->fmt.f71.refcode3);
1290 tape_3590_print_dev_sim_msg_f2(device, irb);
1291 return;
1293 if (sense->mc == 0xf3) {
1294 /* Standard Library Service Information Message */
1295 return;
1297 dev_warn (&device->cdev->dev, "The tape unit has issued an unknown "
1298 "sense message code %x\n", sense->mc);
1301 static int tape_3590_crypt_error(struct tape_device *device,
1302 struct tape_request *request, struct irb *irb)
1304 u8 cu_rc;
1305 u16 ekm_rc2;
1306 char *sense;
1308 sense = ((struct tape_3590_sense *) irb->ecw)->fmt.data;
1309 cu_rc = sense[0];
1310 ekm_rc2 = *((u16*) &sense[10]);
1311 if ((cu_rc == 0) && (ekm_rc2 == 0xee31))
1312 /* key not defined on EKM */
1313 return tape_3590_erp_basic(device, request, irb, -EKEYREJECTED);
1314 if ((cu_rc == 1) || (cu_rc == 2))
1315 /* No connection to EKM */
1316 return tape_3590_erp_basic(device, request, irb, -ENOTCONN);
1318 dev_err (&device->cdev->dev, "The tape unit failed to obtain the "
1319 "encryption key from EKM\n");
1321 return tape_3590_erp_basic(device, request, irb, -ENOKEY);
1325 * 3590 error Recovery routine:
1326 * If possible, it tries to recover from the error. If this is not possible,
1327 * inform the user about the problem.
1329 static int
1330 tape_3590_unit_check(struct tape_device *device, struct tape_request *request,
1331 struct irb *irb)
1333 struct tape_3590_sense *sense;
1335 sense = (struct tape_3590_sense *) irb->ecw;
1337 DBF_EVENT(6, "Unit Check: RQC = %x\n", sense->rc_rqc);
1340 * First check all RC-QRCs where we want to do something special
1341 * - "break": basic error recovery is done
1342 * - "goto out:": just print error message if available
1344 switch (sense->rc_rqc) {
1346 case 0x1110:
1347 tape_3590_print_era_msg(device, irb);
1348 return tape_3590_erp_read_buf_log(device, request, irb);
1350 case 0x2011:
1351 tape_3590_print_era_msg(device, irb);
1352 return tape_3590_erp_read_alternate(device, request, irb);
1354 case 0x2230:
1355 case 0x2231:
1356 tape_3590_print_era_msg(device, irb);
1357 return tape_3590_erp_special_interrupt(device, request, irb);
1358 case 0x2240:
1359 return tape_3590_crypt_error(device, request, irb);
1361 case 0x3010:
1362 DBF_EVENT(2, "(%08x): Backward at Beginning of Partition\n",
1363 device->cdev_id);
1364 return tape_3590_erp_basic(device, request, irb, -ENOSPC);
1365 case 0x3012:
1366 DBF_EVENT(2, "(%08x): Forward at End of Partition\n",
1367 device->cdev_id);
1368 return tape_3590_erp_basic(device, request, irb, -ENOSPC);
1369 case 0x3020:
1370 DBF_EVENT(2, "(%08x): End of Data Mark\n", device->cdev_id);
1371 return tape_3590_erp_basic(device, request, irb, -ENOSPC);
1373 case 0x3122:
1374 DBF_EVENT(2, "(%08x): Rewind Unload initiated\n",
1375 device->cdev_id);
1376 return tape_3590_erp_basic(device, request, irb, -EIO);
1377 case 0x3123:
1378 DBF_EVENT(2, "(%08x): Rewind Unload complete\n",
1379 device->cdev_id);
1380 tape_med_state_set(device, MS_UNLOADED);
1381 tape_3590_schedule_work(device, TO_CRYPT_OFF);
1382 return tape_3590_erp_basic(device, request, irb, 0);
1384 case 0x4010:
1386 * print additional msg since default msg
1387 * "device intervention" is not very meaningfull
1389 tape_med_state_set(device, MS_UNLOADED);
1390 tape_3590_schedule_work(device, TO_CRYPT_OFF);
1391 return tape_3590_erp_basic(device, request, irb, -ENOMEDIUM);
1392 case 0x4012: /* Device Long Busy */
1393 /* XXX: Also use long busy handling here? */
1394 DBF_EVENT(6, "(%08x): LONG BUSY\n", device->cdev_id);
1395 tape_3590_print_era_msg(device, irb);
1396 return tape_3590_erp_basic(device, request, irb, -EBUSY);
1397 case 0x4014:
1398 DBF_EVENT(6, "(%08x): Crypto LONG BUSY\n", device->cdev_id);
1399 return tape_3590_erp_long_busy(device, request, irb);
1401 case 0x5010:
1402 if (sense->rac == 0xd0) {
1403 /* Swap */
1404 tape_3590_print_era_msg(device, irb);
1405 return tape_3590_erp_swap(device, request, irb);
1407 if (sense->rac == 0x26) {
1408 /* Read Opposite */
1409 tape_3590_print_era_msg(device, irb);
1410 return tape_3590_erp_read_opposite(device, request,
1411 irb);
1413 return tape_3590_erp_basic(device, request, irb, -EIO);
1414 case 0x5020:
1415 case 0x5021:
1416 case 0x5022:
1417 case 0x5040:
1418 case 0x5041:
1419 case 0x5042:
1420 tape_3590_print_era_msg(device, irb);
1421 return tape_3590_erp_swap(device, request, irb);
1423 case 0x5110:
1424 case 0x5111:
1425 return tape_3590_erp_basic(device, request, irb, -EMEDIUMTYPE);
1427 case 0x5120:
1428 case 0x1120:
1429 tape_med_state_set(device, MS_UNLOADED);
1430 tape_3590_schedule_work(device, TO_CRYPT_OFF);
1431 return tape_3590_erp_basic(device, request, irb, -ENOMEDIUM);
1433 case 0x6020:
1434 return tape_3590_erp_basic(device, request, irb, -EMEDIUMTYPE);
1436 case 0x8011:
1437 return tape_3590_erp_basic(device, request, irb, -EPERM);
1438 case 0x8013:
1439 dev_warn (&device->cdev->dev, "A different host has privileged"
1440 " access to the tape unit\n");
1441 return tape_3590_erp_basic(device, request, irb, -EPERM);
1442 default:
1443 return tape_3590_erp_basic(device, request, irb, -EIO);
1448 * 3590 interrupt handler:
1450 static int
1451 tape_3590_irq(struct tape_device *device, struct tape_request *request,
1452 struct irb *irb)
1454 if (request == NULL)
1455 return tape_3590_unsolicited_irq(device, irb);
1457 if ((irb->scsw.cmd.dstat & DEV_STAT_UNIT_EXCEP) &&
1458 (irb->scsw.cmd.dstat & DEV_STAT_DEV_END) &&
1459 (request->op == TO_WRI)) {
1460 /* Write at end of volume */
1461 DBF_EVENT(2, "End of volume\n");
1462 return tape_3590_erp_failed(device, request, irb, -ENOSPC);
1465 if (irb->scsw.cmd.dstat & DEV_STAT_UNIT_CHECK)
1466 return tape_3590_unit_check(device, request, irb);
1468 if (irb->scsw.cmd.dstat & DEV_STAT_DEV_END) {
1469 if (irb->scsw.cmd.dstat == DEV_STAT_UNIT_EXCEP) {
1470 if (request->op == TO_FSB || request->op == TO_BSB)
1471 request->rescnt++;
1472 else
1473 DBF_EVENT(5, "Unit Exception!\n");
1476 return tape_3590_done(device, request);
1479 if (irb->scsw.cmd.dstat & DEV_STAT_CHN_END) {
1480 DBF_EVENT(2, "channel end\n");
1481 return TAPE_IO_PENDING;
1484 if (irb->scsw.cmd.dstat & DEV_STAT_ATTENTION) {
1485 DBF_EVENT(2, "Unit Attention when busy..\n");
1486 return TAPE_IO_PENDING;
1489 DBF_EVENT(6, "xunknownirq\n");
1490 tape_dump_sense_dbf(device, request, irb);
1491 return TAPE_IO_STOP;
1495 static int tape_3590_read_dev_chars(struct tape_device *device,
1496 struct tape_3590_rdc_data *rdc_data)
1498 int rc;
1499 struct tape_request *request;
1501 request = tape_alloc_request(1, sizeof(*rdc_data));
1502 if (IS_ERR(request))
1503 return PTR_ERR(request);
1504 request->op = TO_RDC;
1505 tape_ccw_end(request->cpaddr, CCW_CMD_RDC, sizeof(*rdc_data),
1506 request->cpdata);
1507 rc = tape_do_io(device, request);
1508 if (rc == 0)
1509 memcpy(rdc_data, request->cpdata, sizeof(*rdc_data));
1510 tape_free_request(request);
1511 return rc;
1515 * Setup device function
1517 static int
1518 tape_3590_setup_device(struct tape_device *device)
1520 int rc;
1521 struct tape_3590_disc_data *data;
1522 struct tape_3590_rdc_data *rdc_data;
1524 DBF_EVENT(6, "3590 device setup\n");
1525 data = kzalloc(sizeof(struct tape_3590_disc_data), GFP_KERNEL | GFP_DMA);
1526 if (data == NULL)
1527 return -ENOMEM;
1528 data->read_back_op = READ_PREVIOUS;
1529 device->discdata = data;
1531 rdc_data = kmalloc(sizeof(*rdc_data), GFP_KERNEL | GFP_DMA);
1532 if (!rdc_data) {
1533 rc = -ENOMEM;
1534 goto fail_kmalloc;
1536 rc = tape_3590_read_dev_chars(device, rdc_data);
1537 if (rc) {
1538 DBF_LH(3, "Read device characteristics failed!\n");
1539 goto fail_rdc_data;
1541 rc = tape_std_assign(device);
1542 if (rc)
1543 goto fail_rdc_data;
1544 if (rdc_data->data[31] == 0x13) {
1545 data->crypt_info.capability |= TAPE390_CRYPT_SUPPORTED_MASK;
1546 tape_3592_disable_crypt(device);
1547 } else {
1548 DBF_EVENT(6, "Device has NO crypto support\n");
1550 /* Try to find out if medium is loaded */
1551 rc = tape_3590_sense_medium(device);
1552 if (rc) {
1553 DBF_LH(3, "3590 medium sense returned %d\n", rc);
1554 goto fail_rdc_data;
1556 return 0;
1558 fail_rdc_data:
1559 kfree(rdc_data);
1560 fail_kmalloc:
1561 kfree(data);
1562 return rc;
1566 * Cleanup device function
1568 static void
1569 tape_3590_cleanup_device(struct tape_device *device)
1571 flush_workqueue(tape_3590_wq);
1572 tape_std_unassign(device);
1574 kfree(device->discdata);
1575 device->discdata = NULL;
1579 * List of 3590 magnetic tape commands.
1581 static tape_mtop_fn tape_3590_mtop[TAPE_NR_MTOPS] = {
1582 [MTRESET] = tape_std_mtreset,
1583 [MTFSF] = tape_std_mtfsf,
1584 [MTBSF] = tape_std_mtbsf,
1585 [MTFSR] = tape_std_mtfsr,
1586 [MTBSR] = tape_std_mtbsr,
1587 [MTWEOF] = tape_std_mtweof,
1588 [MTREW] = tape_std_mtrew,
1589 [MTOFFL] = tape_std_mtoffl,
1590 [MTNOP] = tape_std_mtnop,
1591 [MTRETEN] = tape_std_mtreten,
1592 [MTBSFM] = tape_std_mtbsfm,
1593 [MTFSFM] = tape_std_mtfsfm,
1594 [MTEOM] = tape_std_mteom,
1595 [MTERASE] = tape_std_mterase,
1596 [MTRAS1] = NULL,
1597 [MTRAS2] = NULL,
1598 [MTRAS3] = NULL,
1599 [MTSETBLK] = tape_std_mtsetblk,
1600 [MTSETDENSITY] = NULL,
1601 [MTSEEK] = tape_3590_mtseek,
1602 [MTTELL] = tape_3590_mttell,
1603 [MTSETDRVBUFFER] = NULL,
1604 [MTFSS] = NULL,
1605 [MTBSS] = NULL,
1606 [MTWSM] = NULL,
1607 [MTLOCK] = NULL,
1608 [MTUNLOCK] = NULL,
1609 [MTLOAD] = tape_std_mtload,
1610 [MTUNLOAD] = tape_std_mtunload,
1611 [MTCOMPRESSION] = tape_std_mtcompression,
1612 [MTSETPART] = NULL,
1613 [MTMKPART] = NULL
1617 * Tape discipline structure for 3590.
1619 static struct tape_discipline tape_discipline_3590 = {
1620 .owner = THIS_MODULE,
1621 .setup_device = tape_3590_setup_device,
1622 .cleanup_device = tape_3590_cleanup_device,
1623 .process_eov = tape_std_process_eov,
1624 .irq = tape_3590_irq,
1625 .read_block = tape_std_read_block,
1626 .write_block = tape_std_write_block,
1627 .ioctl_fn = tape_3590_ioctl,
1628 .mtop_array = tape_3590_mtop
1631 static struct ccw_device_id tape_3590_ids[] = {
1632 {CCW_DEVICE_DEVTYPE(0x3590, 0, 0x3590, 0), .driver_info = tape_3590},
1633 {CCW_DEVICE_DEVTYPE(0x3592, 0, 0x3592, 0), .driver_info = tape_3592},
1634 { /* end of list */ }
1637 static int
1638 tape_3590_online(struct ccw_device *cdev)
1640 return tape_generic_online(dev_get_drvdata(&cdev->dev),
1641 &tape_discipline_3590);
1644 static struct ccw_driver tape_3590_driver = {
1645 .driver = {
1646 .name = "tape_3590",
1647 .owner = THIS_MODULE,
1649 .ids = tape_3590_ids,
1650 .probe = tape_generic_probe,
1651 .remove = tape_generic_remove,
1652 .set_offline = tape_generic_offline,
1653 .set_online = tape_3590_online,
1654 .freeze = tape_generic_pm_suspend,
1655 .int_class = IRQIO_TAP,
1659 * Setup discipline structure.
1661 static int
1662 tape_3590_init(void)
1664 int rc;
1666 TAPE_DBF_AREA = debug_register("tape_3590", 2, 2, 4 * sizeof(long));
1667 debug_register_view(TAPE_DBF_AREA, &debug_sprintf_view);
1668 #ifdef DBF_LIKE_HELL
1669 debug_set_level(TAPE_DBF_AREA, 6);
1670 #endif
1672 DBF_EVENT(3, "3590 init\n");
1674 tape_3590_wq = alloc_workqueue("tape_3590", 0, 0);
1675 if (!tape_3590_wq)
1676 return -ENOMEM;
1678 /* Register driver for 3590 tapes. */
1679 rc = ccw_driver_register(&tape_3590_driver);
1680 if (rc) {
1681 destroy_workqueue(tape_3590_wq);
1682 DBF_EVENT(3, "3590 init failed\n");
1683 } else
1684 DBF_EVENT(3, "3590 registered\n");
1685 return rc;
1688 static void
1689 tape_3590_exit(void)
1691 ccw_driver_unregister(&tape_3590_driver);
1692 destroy_workqueue(tape_3590_wq);
1693 debug_unregister(TAPE_DBF_AREA);
1696 MODULE_DEVICE_TABLE(ccw, tape_3590_ids);
1697 MODULE_AUTHOR("(C) 2001,2006 IBM Corporation");
1698 MODULE_DESCRIPTION("Linux on zSeries channel attached 3590 tape device driver");
1699 MODULE_LICENSE("GPL");
1701 module_init(tape_3590_init);
1702 module_exit(tape_3590_exit);