| blob | 9ed1d9d96783cbf8992b9a91f7f38221dc8f6dc1 |
1 Release Date : Wed. May 11, 2011 17:00:00 PST 2010 -
2 (emaild-id:megaraidlinux@lsi.com)
3 Adam Radford
4 Current Version : 00.00.05.38-rc1
5 Old Version : 00.00.05.34-rc1
6 1. Remove MSI-X black list, use MFI_REG_STATE.ready.msiEnable.
7 2. Remove un-used function megasas_return_cmd_for_smid().
8 3. Check MFI_REG_STATE.fault.resetAdapter in megasas_reset_fusion().
9 4. Disable interrupts/free_irq() in megasas_shutdown().
10 5. Fix bug where AENs could be lost in probe() and resume().
11 6. Convert 6,10,12 byte CDB's to 16 byte CDB for large LBA's for FastPath
12 IO.
13 7. Add 1078 OCR support.
14 -------------------------------------------------------------------------------
15 Release Date : Thu. Feb 24, 2011 17:00:00 PST 2010 -
16 (emaild-id:megaraidlinux@lsi.com)
17 Adam Radford
18 Current Version : 00.00.05.34-rc1
19 Old Version : 00.00.05.29-rc1
20 1. Fix some failure gotos from megasas_probe_one(), etc.
21 2. Add missing check_and_restore_queue_depth() call in
22 complete_cmd_fusion().
23 3. Enable MSI-X before calling megasas_init_fw().
24 4. Call tasklet_schedule() even if outbound_intr_status == 0 for MFI based
25 boards in MSI-X mode.
26 5. Fix megasas_probe_one() to clear PCI_MSIX_FLAGS_ENABLE in msi control
27 register in kdump kernel.
28 6. Fix megasas_get_cmd() to only print "Command pool empty" if
29 megasas_dbg_lvl is set.
30 7. Fix megasas_build_dcdb_fusion() to not filter by TYPE_DISK.
31 8. Fix megasas_build_dcdb_fusion() to use io_request->LUN[1] field.
32 9. Add MR_EVT_CFG_CLEARED to megasas_aen_polling().
33 10. Fix tasklet_init() in megasas_init_fw() to use instancet->tasklet.
34 11. Fix fault state handling in megasas_transition_to_ready().
35 12. Fix max_sectors setting for IEEE SGL's.
36 13. Fix iMR OCR support to work correctly.
37 -------------------------------------------------------------------------------
38 Release Date : Tues. Dec 14, 2010 17:00:00 PST 2010 -
39 (emaild-id:megaraidlinux@lsi.com)
40 Adam Radford
41 Current Version : 00.00.05.29-rc1
42 Old Version : 00.00.04.31-rc1
43 1. Rename megaraid_sas.c to megaraid_sas_base.c.
44 2. Update GPL headers.
45 3. Add MSI-X support and 'msix_disable' module parameter.
46 4. Use lowest memory bar (for SR-IOV VF support).
47 5. Add struct megasas_instance_temlate changes, and change all code to use
48 new instance entries:
50 irqreturn_t (*service_isr )(int irq, void *devp);
51 void (*tasklet)(unsigned long);
52 u32 (*init_adapter)(struct megasas_instance *);
53 u32 (*build_and_issue_cmd) (struct megasas_instance *,
54 struct scsi_cmnd *);
55 void (*issue_dcmd) (struct megasas_instance *instance,
56 struct megasas_cmd *cmd);
58 6. Add code to support MegaRAID 9265/9285 controllers device id (0x5b).
59 -------------------------------------------------------------------------------
60 1 Release Date : Thur. May 03, 2010 09:12:45 PST 2009 -
61 (emaild-id:megaraidlinux@lsi.com)
62 Bo Yang
64 2 Current Version : 00.00.04.31-rc1
65 3 Older Version : 00.00.04.17.1-rc1
67 1. Add the Online Controller Reset (OCR) to the Driver.
68 OCR is the new feature for megaraid_sas driver which
69 will allow the fw to do the chip reset which will not
70 affact the OS behavious.
72 To add the OCR support, driver need to do:
73 a). reset the controller chips -- Xscale and Gen2 which
74 will change the function calls and add the reset function
75 related to this two chips.
77 b). during the reset, driver will store the pending cmds
78 which not returned by FW to driver's pending queue. Driver
79 will re-issue those pending cmds again to FW after the OCR
80 finished.
82 c). In driver's timeout routine, driver will report to
83 OS as reset. Also driver's queue routine will block the
84 cmds until the OCR finished.
86 d). in Driver's ISR routine, if driver get the FW state as
87 state change, FW in Failure status and FW support online controller
88 reset (OCR), driver will start to do the controller reset.
90 e). In driver's IOCTL routine, the application cmds will wait for the
91 OCR to finish, then issue the cmds to FW.
93 f). Before driver kill adapter, driver will do last chance of
94 OCR to see if driver can bring back the FW.
96 2. Add the support update flag to the driver to tell LSI megaraid_sas
97 application which driver will support the device update. So application
98 will not need to do the device update after application add/del the device
99 from the system.
100 3. In driver's timeout routine, driver will do three time reset if fw is in
101 failed state. Driver will kill adapter if can't bring back FW after the
102 this three times reset.
103 4. Add the input parameter max_sectors to 1MB support to our GEN2 controller.
104 customer can use the input paramenter max_sectors to add 1MB support to GEN2
105 controller.
107 1 Release Date : Thur. Oct 29, 2009 09:12:45 PST 2009 -
108 (emaild-id:megaraidlinux@lsi.com)
109 Bo Yang
111 2 Current Version : 00.00.04.17.1-rc1
112 3 Older Version : 00.00.04.12
114 1. Add the pad_0 in mfi frame structure to 0 to fix the
115 context value larger than 32bit value issue.
117 2. Add the logic drive list to the driver. Driver will
118 keep the logic drive list internal after driver load.
120 3. driver fixed the device update issue after get the AEN
121 PD delete/ADD, LD add/delete from FW.
123 1 Release Date : Tues. July 28, 2009 10:12:45 PST 2009 -
124 (emaild-id:megaraidlinux@lsi.com)
125 Bo Yang
127 2 Current Version : 00.00.04.12
128 3 Older Version : 00.00.04.10
130 1. Change the AEN sys PD update from scsi_scan to
131 scsi_add_device and scsi_remove_device.
132 2. Takeoff the debug print-out in aen_polling routine.
134 1 Release Date : Thur. July 02, 2009 10:12:45 PST 2009 -
135 (emaild-id:megaraidlinux@lsi.com)
136 Bo Yang
138 2 Current Version : 00.00.04.10
139 3 Older Version : 00.00.04.08
141 1. Add the 3 mins timeout during the controller initialize.
142 2. Add the fix for 64bit sense date errors.
144 1 Release Date : Tues. May 05, 2009 10:12:45 PST 2009 -
145 (emaild-id:megaraidlinux@lsi.com)
146 Bo Yang
148 2 Current Version : 00.00.04.08
149 3 Older Version : 00.00.04.06
151 1. Add the fix of pending in FW after deleted the logic drives.
152 2. Add the fix of deallocating memory after get pdlist.
154 1 Release Date : Tues. March 26, 2009 10:12:45 PST 2009 -
155 (emaild-id:megaraidlinux@lsi.com)
156 Bo Yang
158 2 Current Version : 00.00.04.06
159 3 Older Version : 00.00.04.04
161 1. Add the fix of the driver cmd empty fix of the driver cmd empty.
162 2. Add the fix of the driver MSM AEN CMD cause the system slow.
164 1 Release Date : Tues. March 03, 2009 10:12:45 PST 2009 -
165 (emaild-id:megaraidlinux@lsi.com)
166 Bo Yang
168 2 Current Version : 00.00.04.04
169 3 Older Version : 00.00.04.01
171 1. Add the Tape drive fix to the driver: If the command is for
172 the tape device, set the pthru timeout to the os layer timeout value.
174 2. Add Poll_wait mechanism to Gen-2 Linux driv.
175 In the aen handler, driver needs to wakeup poll handler similar to
176 the way it raises SIGIO.
178 3. Add new controller new SAS2 support to the driver.
180 4. Report the unconfigured PD (system PD) to OS.
182 5. Add the IEEE SGL support to the driver
184 6. Reasign the Application cmds to SAS2 controller
186 1 Release Date : Thur.July. 24 11:41:51 PST 2008 -
187 (emaild-id:megaraidlinux@lsi.com)
188 Sumant Patro
189 Bo Yang
191 2 Current Version : 00.00.04.01
192 3 Older Version : 00.00.03.22
194 1. Add the new controller (0078, 0079) support to the driver
195 Those controllers are LSI's next generatation(gen2) SAS controllers.
197 1 Release Date : Mon.June. 23 10:12:45 PST 2008 -
198 (emaild-id:megaraidlinux@lsi.com)
199 Sumant Patro
200 Bo Yang
202 2 Current Version : 00.00.03.22
203 3 Older Version : 00.00.03.20
205 1. Add shutdown DCMD cmd to the shutdown routine to make FW shutdown proper.
206 2. Unexpected interrupt occurs in HWR Linux driver, add the dumy readl pci flush will fix this issue.
208 1 Release Date : Mon. March 10 11:02:31 PDT 2008 -
209 (emaild-id:megaraidlinux@lsi.com)
210 Sumant Patro
211 Bo Yang
213 2 Current Version : 00.00.03.20-RC1
214 3 Older Version : 00.00.03.16
216 1. Rollback the sense info implementation
217 Sense buffer ptr data type in the ioctl path is reverted back
218 to u32 * as in previous versions of driver.
220 2. Fixed the driver frame count.
221 When Driver sent wrong frame count to firmware. As this
222 particular command is sent to drive, FW is seeing continuous
223 chip resets and so the command will timeout.
225 3. Add the new controller(1078DE) support to the driver
226 and Increase the max_wait to 60 from 10 in the controller
227 operational status. With this max_wait increase, driver will
228 make sure the FW will finish the pending cmd for KDUMP case.
230 1 Release Date : Thur. Nov. 07 16:30:43 PST 2007 -
231 (emaild-id:megaraidlinux@lsi.com)
232 Sumant Patro
233 Bo Yang
235 2 Current Version : 00.00.03.16
236 3 Older Version : 00.00.03.15
238 1. Increased MFI_POLL_TIMEOUT_SECS to 60 seconds from 10. FW may take
239 a max of 60 seconds to respond to the INIT cmd.
241 1 Release Date : Fri. Sep. 07 16:30:43 PST 2007 -
242 (emaild-id:megaraidlinux@lsi.com)
243 Sumant Patro
244 Bo Yang
246 2 Current Version : 00.00.03.15
247 3 Older Version : 00.00.03.14
249 1. Added module parameter "poll_mode_io" to support for "polling"
250 (reduced interrupt operation). In this mode, IO completion
251 interrupts are delayed. At the end of initiating IOs, the
252 driver schedules for cmd completion if there are pending cmds
253 to be completed. A timer-based interrupt has also been added
254 to prevent IO completion processing from being delayed
255 indefinitely in the case that no new IOs are initiated.
257 1 Release Date : Fri. Sep. 07 16:30:43 PST 2007 -
258 (emaild-id:megaraidlinux@lsi.com)
259 Sumant Patro
260 Bo Yang
262 2 Current Version : 00.00.03.14
263 3 Older Version : 00.00.03.13
265 1. Setting the max_sectors_per_req based on max SGL supported by the
266 FW. Prior versions calculated this value from controller info
267 (max_sectors_1, max_sectors_2). For certain controllers/FW,
268 this was resulting in a value greater than max SGL supported
269 by the FW. Issue was first reported by users running LUKS+XFS
270 with megaraid_sas. Thanks to RB for providing the logs and
271 duplication steps that helped to get to the root cause of the
272 issue. 2. Increased MFI_POLL_TIMEOUT_SECS to 60 seconds from
273 10. FW may take a max of 60 seconds to respond to the INIT
274 cmd.
276 1 Release Date : Fri. June. 15 16:30:43 PST 2007 -
277 (emaild-id:megaraidlinux@lsi.com)
278 Sumant Patro
279 Bo Yang
281 2 Current Version : 00.00.03.13
282 3 Older Version : 00.00.03.12
284 1. Added the megasas_reset_timer routine to intercept cmd timeout and throttle io.
286 On Fri, 2007-03-16 at 16:44 -0600, James Bottomley wrote:
287 It looks like megaraid_sas at least needs this to throttle its commands
288 > as they begin to time out. The code keeps the existing transport
289 > template use of eh_timed_out (and allows the transport to override the
290 > host if they both have this callback).
291 >
292 > James
294 1 Release Date : Sat May. 12 16:30:43 PST 2007 -
295 (emaild-id:megaraidlinux@lsi.com)
296 Sumant Patro
297 Bo Yang
299 2 Current Version : 00.00.03.12
300 3 Older Version : 00.00.03.11
302 1. When MegaSAS driver receives reset call from OS, driver waits in reset
303 routine for max 3 minutes for all pending command completion. Now driver will
304 call completion routine every 5 seconds from the reset routine instead of
305 waiting for depending on cmd completion from isr path.
307 1 Release Date : Mon Apr. 30 10:25:52 PST 2007 -
308 (emaild-id:megaraidlinux@lsi.com)
309 Sumant Patro
310 Bo Yang
312 2 Current Version : 00.00.03.11
313 3 Older Version : 00.00.03.09
315 1. Memory Manager for IOCTL removed for 2.6 kernels.
316 pci_alloc_consistent replaced by dma_alloc_coherent. With this
317 change there is no need of memory manager in the driver code
319 On Wed, 2007-02-07 at 13:30 -0800, Andrew Morton wrote:
320 > I suspect all this horror is due to stupidity in the DMA API.
321 >
322 > pci_alloc_consistent() just goes and assumes GFP_ATOMIC, whereas
323 > the caller (megasas_mgmt_fw_ioctl) would have been perfectly happy
324 > to use GFP_KERNEL.
325 >
326 > I bet this fixes it
328 It does, but the DMA API was expanded to cope with this exact case, so
329 use dma_alloc_coherent() directly in the megaraid code instead. The dev
330 is just &pci_dev->dev.
332 James <James.Bottomley@SteelEye.com>
334 3. SYNCHRONIZE_CACHE is not supported by FW and thus blocked by driver.
335 4. Hibernation support added
336 5. Performing diskdump while running IO in RHEL 4 was failing. Fixed.
338 1 Release Date : Fri Feb. 09 14:36:28 PST 2007 -
339 (emaild-id:megaraidlinux@lsi.com)
340 Sumant Patro
341 Bo Yang
343 2 Current Version : 00.00.03.09
344 3 Older Version : 00.00.03.08
346 i. Under heavy IO mid-layer prints "DRIVER_TIMEOUT" errors
348 The driver now waits for 10 seconds to elapse instead of 5 (as in
349 previous release) to resume IO.
351 1 Release Date : Mon Feb. 05 11:35:24 PST 2007 -
352 (emaild-id:megaraidlinux@lsi.com)
353 Sumant Patro
354 Bo Yang
355 2 Current Version : 00.00.03.08
356 3 Older Version : 00.00.03.07
358 i. Under heavy IO mid-layer prints "DRIVER_TIMEOUT" errors
360 Fix: The driver is now throttling IO.
361 Checks added in megasas_queue_command to know if FW is able to
362 process commands within timeout period. If number of retries
363 is 2 or greater,the driver stops sending cmd to FW temporarily. IO is
364 resumed if pending cmd count reduces to 16 or 5 seconds has elapsed
365 from the time cmds were last sent to FW.
367 ii. FW enables WCE bit in Mode Sense cmd for drives that are configured
368 as WriteBack. The OS may send "SYNCHRONIZE_CACHE" cmd when Logical
369 Disks are exposed with WCE=1. User is advised to enable Write Back
370 mode only when the controller has battery backup. At this time
371 Synhronize cache is not supported by the FW. Driver will short-cycle
372 the cmd and return success without sending down to FW.
374 1 Release Date : Sun Jan. 14 11:21:32 PDT 2007 -
375 Sumant Patro <Sumant.Patro@lsil.com>/Bo Yang
376 2 Current Version : 00.00.03.07
377 3 Older Version : 00.00.03.06
379 i. bios_param entry added in scsi_host_template that returns disk geometry
380 information.
382 1 Release Date : Fri Oct 20 11:21:32 PDT 2006 - Sumant Patro <Sumant.Patro@lsil.com>/Bo Yang
383 2 Current Version : 00.00.03.06
384 3 Older Version : 00.00.03.05
386 1. Added new memory management module to support the IOCTL memory allocation. For IOCTL we try to allocate from the memory pool created during driver initialization. If mem pool is empty then we allocate at run time.
387 2. Added check in megasas_queue_command and dpc/isr routine to see if we have already declared adapter dead
388 (hw_crit_error=1). If hw_crit_error==1, now we donot accept any processing of pending cmds/accept any cmd from OS
390 1 Release Date : Mon Oct 02 11:21:32 PDT 2006 - Sumant Patro <Sumant.Patro@lsil.com>
391 2 Current Version : 00.00.03.05
392 3 Older Version : 00.00.03.04
394 i. PCI_DEVICE macro used
396 Convert the pci_device_id-table of the megaraid_sas-driver to the PCI_DEVICE-macro, to safe some lines.
398 - Henrik Kretzschmar <henne@nachtwindheim.de>
399 ii. All compiler warnings removed
400 iii. megasas_ctrl_info struct reverted to 3.02 release
401 iv. Default value of megasas_dbg_lvl set to 0
402 v. Removing in megasas_exit the sysfs entry created for megasas_dbg_lvl
403 vi. In megasas_teardown_frame_pool(), cmd->frame was passed instead of
404 cmd->sense to pci_pool_free. Fixed. Bug was pointed out by
405 Eric Sesterhenn
407 1 Release Date : Wed Sep 13 14:22:51 PDT 2006 - Sumant Patro <Sumant.Patro@lsil.com>
408 2 Current Version : 00.00.03.04
409 3 Older Version : 00.00.03.03
411 i. Added Reboot notify
412 ii. Reduced by 1 max cmds sent to FW from Driver to make the reply_q_sz same
413 as Max Cmds FW can support
415 1 Release Date : Tue Aug 22 16:33:14 PDT 2006 - Sumant Patro <Sumant.Patro@lsil.com>
416 2 Current Version : 00.00.03.03
417 3 Older Version : 00.00.03.02
419 i. Send stop adapter to FW & Dump pending FW cmds before declaring adapter dead.
420 New varible added to set dbg level.
421 ii. Disable interrupt made as fn pointer as they are different for 1068 / 1078
422 iii. Frame count optimization. Main frame can contain 2 SGE for 64 bit SGLs and
423 3 SGE for 32 bit SGL
424 iv. Tasklet added for cmd completion
425 v. If FW in operational state before firing INIT, now we send RESET Flag to FW instead of just READY. This is used to do soft reset.
426 vi. megasas_ctrl_prop structure updated (based on FW struct)
427 vii. Added print : FW now in Ready State during initialization
429 1 Release Date : Sun Aug 06 22:49:52 PDT 2006 - Sumant Patro <Sumant.Patro@lsil.com>
430 2 Current Version : 00.00.03.02
431 3 Older Version : 00.00.03.01
433 i. Added FW tranistion state for Hotplug scenario
435 1 Release Date : Sun May 14 22:49:52 PDT 2006 - Sumant Patro <Sumant.Patro@lsil.com>
436 2 Current Version : 00.00.03.01
437 3 Older Version : 00.00.02.04
439 i. Added support for ZCR controller.
441 New device id 0x413 added.
443 ii. Bug fix : Disable controller interrupt before firing INIT cmd to FW.
445 Interrupt is enabled after required initialization is over.
446 This is done to ensure that driver is ready to handle interrupts when
447 it is generated by the controller.
449 -Sumant Patro <Sumant.Patro@lsil.com>
451 1 Release Date : Wed Feb 03 14:31:44 PST 2006 - Sumant Patro <Sumant.Patro@lsil.com>
452 2 Current Version : 00.00.02.04
453 3 Older Version : 00.00.02.04
455 i. Remove superflous instance_lock
457 gets rid of the otherwise superflous instance_lock and avoids an unsave
458 unsynchronized access in the error handler.
460 - Christoph Hellwig <hch@lst.de>
463 1 Release Date : Wed Feb 03 14:31:44 PST 2006 - Sumant Patro <Sumant.Patro@lsil.com>
464 2 Current Version : 00.00.02.04
465 3 Older Version : 00.00.02.04
467 i. Support for 1078 type (ppc IOP) controller, device id : 0x60 added.
468 During initialization, depending on the device id, the template members
469 are initialized with function pointers specific to the ppc or
470 xscale controllers.
472 -Sumant Patro <Sumant.Patro@lsil.com>
474 1 Release Date : Fri Feb 03 14:16:25 PST 2006 - Sumant Patro
475 <Sumant.Patro@lsil.com>
476 2 Current Version : 00.00.02.04
477 3 Older Version : 00.00.02.02
478 i. Register 16 byte CDB capability with scsi midlayer
480 "Ths patch properly registers the 16 byte command length capability of the
481 megaraid_sas controlled hardware with the scsi midlayer. All megaraid_sas
482 hardware supports 16 byte CDB's."
484 -Joshua Giles <joshua_giles@dell.com>
486 1 Release Date : Mon Jan 23 14:09:01 PST 2006 - Sumant Patro <Sumant.Patro@lsil.com>
487 2 Current Version : 00.00.02.02
488 3 Older Version : 00.00.02.01
490 i. New template defined to represent each family of controllers (identified by processor used).
491 The template will have defintions that will be initialised to appropritae values for a specific family of controllers. The template definition has four function pointers. During driver initialisation the function pointers will be set based on the controller family type. This change is done to support new controllers that has different processors and thus different register set.
493 -Sumant Patro <Sumant.Patro@lsil.com>
495 1 Release Date : Mon Dec 19 14:36:26 PST 2005 - Sumant Patro <Sumant.Patro@lsil.com>
496 2 Current Version : 00.00.02.00-rc4
497 3 Older Version : 00.00.02.01
499 i. Code reorganized to remove code duplication in megasas_build_cmd.
501 "There's a lot of duplicate code megasas_build_cmd. Move that out of the different codepathes and merge the reminder of megasas_build_cmd into megasas_queue_command"
503 - Christoph Hellwig <hch@lst.de>
505 ii. Defined MEGASAS_IOC_FIRMWARE32 for code paths that handles 32 bit applications in 64 bit systems.
507 "MEGASAS_IOC_FIRMWARE can't be redefined if CONFIG_COMPAT is set, we need to define a MEGASAS_IOC_FIRMWARE32 define so native binaries continue to work"
509 - Christoph Hellwig <hch@lst.de>