drivers/gpio/gpio-plat-samsung.c

   1 /* arch/arm/plat-samsung/gpiolib.c
   2  *
   3  * Copyright 2008 Openmoko, Inc.
   4  * Copyright 2008 Simtec Electronics
   5  *      Ben Dooks <ben@simtec.co.uk>
   6  *      http://armlinux.simtec.co.uk/
   7  *
   8  * Copyright (c) 2009 Samsung Electronics Co., Ltd.
   9  *              http://www.samsung.com/
  10  *
  11  * SAMSUNG - GPIOlib support
  12  *
  13  * This program is free software; you can redistribute it and/or modify
  14  * it under the terms of the GNU General Public License version 2 as
  15  * published by the Free Software Foundation.
  16  */
  17
  18 #include <linux/kernel.h>
  19 #include <linux/irq.h>
  20 #include <linux/io.h>
  21 #include <linux/gpio.h>
  22 #include <plat/gpio-core.h>
  23 #include <plat/gpio-cfg.h>
  24 #include <plat/gpio-cfg-helpers.h>
  25
  26 #ifndef DEBUG_GPIO
  27 #define gpio_dbg(x...) do { } while (0)
  28 #else
  29 #define gpio_dbg(x...) printk(KERN_DEBUG x)
  30 #endif
  31
  32 /* The samsung_gpiolib_4bit routines are to control the gpio banks where
  33  * the gpio configuration register (GPxCON) has 4 bits per GPIO, as the
  34  * following example:
  35  *
  36  * base + 0x00: Control register, 4 bits per gpio
  37  *              gpio n: 4 bits starting at (4*n)
  38  *              0000 = input, 0001 = output, others mean special-function
  39  * base + 0x04: Data register, 1 bit per gpio
  40  *              bit n: data bit n
  41  *
  42  * Note, since the data register is one bit per gpio and is at base + 0x4
  43  * we can use s3c_gpiolib_get and s3c_gpiolib_set to change the state of
  44  * the output.
  45 */
  46
  47 static int samsung_gpiolib_4bit_input(struct gpio_chip *chip,
  48                                       unsigned int offset)
  49 {
  50         struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
  51         void __iomem *base = ourchip->base;
  52         unsigned long con;
  53
  54         con = __raw_readl(base + GPIOCON_OFF);
  55         con &= ~(0xf << con_4bit_shift(offset));
  56         __raw_writel(con, base + GPIOCON_OFF);
  57
  58         gpio_dbg("%s: %p: CON now %08lx\n", __func__, base, con);
  59
  60         return 0;
  61 }
  62
  63 static int samsung_gpiolib_4bit_output(struct gpio_chip *chip,
  64                                        unsigned int offset, int value)
  65 {
  66         struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
  67         void __iomem *base = ourchip->base;
  68         unsigned long con;
  69         unsigned long dat;
  70
  71         con = __raw_readl(base + GPIOCON_OFF);
  72         con &= ~(0xf << con_4bit_shift(offset));
  73         con |= 0x1 << con_4bit_shift(offset);
  74
  75         dat = __raw_readl(base + GPIODAT_OFF);
  76
  77         if (value)
  78                 dat |= 1 << offset;
  79         else
  80                 dat &= ~(1 << offset);
  81
  82         __raw_writel(dat, base + GPIODAT_OFF);
  83         __raw_writel(con, base + GPIOCON_OFF);
  84         __raw_writel(dat, base + GPIODAT_OFF);
  85
  86         gpio_dbg("%s: %p: CON %08lx, DAT %08lx\n", __func__, base, con, dat);
  87
  88         return 0;
  89 }
  90
  91 /* The next set of routines are for the case where the GPIO configuration
  92  * registers are 4 bits per GPIO but there is more than one register (the
  93  * bank has more than 8 GPIOs.
  94  *
  95  * This case is the similar to the 4 bit case, but the registers are as
  96  * follows:
  97  *
  98  * base + 0x00: Control register, 4 bits per gpio (lower 8 GPIOs)
  99  *              gpio n: 4 bits starting at (4*n)
 100  *              0000 = input, 0001 = output, others mean special-function
 101  * base + 0x04: Control register, 4 bits per gpio (up to 8 additions GPIOs)
 102  *              gpio n: 4 bits starting at (4*n)
 103  *              0000 = input, 0001 = output, others mean special-function
 104  * base + 0x08: Data register, 1 bit per gpio
 105  *              bit n: data bit n
 106  *
 107  * To allow us to use the s3c_gpiolib_get and s3c_gpiolib_set routines we
 108  * store the 'base + 0x4' address so that these routines see the data
 109  * register at ourchip->base + 0x04.
 110  */
 111
 112 static int samsung_gpiolib_4bit2_input(struct gpio_chip *chip,
 113                                        unsigned int offset)
 114 {
 115         struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
 116         void __iomem *base = ourchip->base;
 117         void __iomem *regcon = base;
 118         unsigned long con;
 119
 120         if (offset > 7)
 121                 offset -= 8;
 122         else
 123                 regcon -= 4;
 124
 125         con = __raw_readl(regcon);
 126         con &= ~(0xf << con_4bit_shift(offset));
 127         __raw_writel(con, regcon);
 128
 129         gpio_dbg("%s: %p: CON %08lx\n", __func__, base, con);
 130
 131         return 0;
 132 }
 133
 134 static int samsung_gpiolib_4bit2_output(struct gpio_chip *chip,
 135                                         unsigned int offset, int value)
 136 {
 137         struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
 138         void __iomem *base = ourchip->base;
 139         void __iomem *regcon = base;
 140         unsigned long con;
 141         unsigned long dat;
 142         unsigned con_offset = offset;
 143
 144         if (con_offset > 7)
 145                 con_offset -= 8;
 146         else
 147                 regcon -= 4;
 148
 149         con = __raw_readl(regcon);
 150         con &= ~(0xf << con_4bit_shift(con_offset));
 151         con |= 0x1 << con_4bit_shift(con_offset);
 152
 153         dat = __raw_readl(base + GPIODAT_OFF);
 154
 155         if (value)
 156                 dat |= 1 << offset;
 157         else
 158                 dat &= ~(1 << offset);
 159
 160         __raw_writel(dat, base + GPIODAT_OFF);
 161         __raw_writel(con, regcon);
 162         __raw_writel(dat, base + GPIODAT_OFF);
 163
 164         gpio_dbg("%s: %p: CON %08lx, DAT %08lx\n", __func__, base, con, dat);
 165
 166         return 0;
 167 }
 168
 169 void __init samsung_gpiolib_add_4bit(struct s3c_gpio_chip *chip)
 170 {
 171         chip->chip.direction_input = samsung_gpiolib_4bit_input;
 172         chip->chip.direction_output = samsung_gpiolib_4bit_output;
 173         chip->pm = __gpio_pm(&s3c_gpio_pm_4bit);
 174 }
 175
 176 void __init samsung_gpiolib_add_4bit2(struct s3c_gpio_chip *chip)
 177 {
 178         chip->chip.direction_input = samsung_gpiolib_4bit2_input;
 179         chip->chip.direction_output = samsung_gpiolib_4bit2_output;
 180         chip->pm = __gpio_pm(&s3c_gpio_pm_4bit);
 181 }
 182
 183 void __init samsung_gpiolib_add_4bit_chips(struct s3c_gpio_chip *chip,
 184                                            int nr_chips)
 185 {
 186         for (; nr_chips > 0; nr_chips--, chip++) {
 187                 samsung_gpiolib_add_4bit(chip);
 188                 s3c_gpiolib_add(chip);
 189         }
 190 }
 191
 192 void __init samsung_gpiolib_add_4bit2_chips(struct s3c_gpio_chip *chip,
 193                                             int nr_chips)
 194 {
 195         for (; nr_chips > 0; nr_chips--, chip++) {
 196                 samsung_gpiolib_add_4bit2(chip);
 197                 s3c_gpiolib_add(chip);
 198         }
 199 }
 200
 201 void __init samsung_gpiolib_add_2bit_chips(struct s3c_gpio_chip *chip,
 202                                            int nr_chips)
 203 {
 204         for (; nr_chips > 0; nr_chips--, chip++)
 205                 s3c_gpiolib_add(chip);
 206 }