ARM: 7409/1: Do not call flush_cache_user_range with mmap_sem held
[linux/fpc-iii.git] / drivers / net / enic / vnic_devcmd.h
blobc5569bfb47ac1d7466486e650dd70b03660b2d6a
1 /*
2 * Copyright 2008-2010 Cisco Systems, Inc. All rights reserved.
3 * Copyright 2007 Nuova Systems, Inc. All rights reserved.
5 * This program is free software; you may redistribute it and/or modify
6 * it under the terms of the GNU General Public License as published by
7 * the Free Software Foundation; version 2 of the License.
9 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
10 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
11 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
12 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
13 * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
14 * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
15 * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
16 * SOFTWARE.
20 #ifndef _VNIC_DEVCMD_H_
21 #define _VNIC_DEVCMD_H_
23 #define _CMD_NBITS 14
24 #define _CMD_VTYPEBITS 10
25 #define _CMD_FLAGSBITS 6
26 #define _CMD_DIRBITS 2
28 #define _CMD_NMASK ((1 << _CMD_NBITS)-1)
29 #define _CMD_VTYPEMASK ((1 << _CMD_VTYPEBITS)-1)
30 #define _CMD_FLAGSMASK ((1 << _CMD_FLAGSBITS)-1)
31 #define _CMD_DIRMASK ((1 << _CMD_DIRBITS)-1)
33 #define _CMD_NSHIFT 0
34 #define _CMD_VTYPESHIFT (_CMD_NSHIFT+_CMD_NBITS)
35 #define _CMD_FLAGSSHIFT (_CMD_VTYPESHIFT+_CMD_VTYPEBITS)
36 #define _CMD_DIRSHIFT (_CMD_FLAGSSHIFT+_CMD_FLAGSBITS)
39 * Direction bits (from host perspective).
41 #define _CMD_DIR_NONE 0U
42 #define _CMD_DIR_WRITE 1U
43 #define _CMD_DIR_READ 2U
44 #define _CMD_DIR_RW (_CMD_DIR_WRITE | _CMD_DIR_READ)
47 * Flag bits.
49 #define _CMD_FLAGS_NONE 0U
50 #define _CMD_FLAGS_NOWAIT 1U
53 * vNIC type bits.
55 #define _CMD_VTYPE_NONE 0U
56 #define _CMD_VTYPE_ENET 1U
57 #define _CMD_VTYPE_FC 2U
58 #define _CMD_VTYPE_SCSI 4U
59 #define _CMD_VTYPE_ALL (_CMD_VTYPE_ENET | _CMD_VTYPE_FC | _CMD_VTYPE_SCSI)
62 * Used to create cmds..
64 #define _CMDCF(dir, flags, vtype, nr) \
65 (((dir) << _CMD_DIRSHIFT) | \
66 ((flags) << _CMD_FLAGSSHIFT) | \
67 ((vtype) << _CMD_VTYPESHIFT) | \
68 ((nr) << _CMD_NSHIFT))
69 #define _CMDC(dir, vtype, nr) _CMDCF(dir, 0, vtype, nr)
70 #define _CMDCNW(dir, vtype, nr) _CMDCF(dir, _CMD_FLAGS_NOWAIT, vtype, nr)
73 * Used to decode cmds..
75 #define _CMD_DIR(cmd) (((cmd) >> _CMD_DIRSHIFT) & _CMD_DIRMASK)
76 #define _CMD_FLAGS(cmd) (((cmd) >> _CMD_FLAGSSHIFT) & _CMD_FLAGSMASK)
77 #define _CMD_VTYPE(cmd) (((cmd) >> _CMD_VTYPESHIFT) & _CMD_VTYPEMASK)
78 #define _CMD_N(cmd) (((cmd) >> _CMD_NSHIFT) & _CMD_NMASK)
80 enum vnic_devcmd_cmd {
81 CMD_NONE = _CMDC(_CMD_DIR_NONE, _CMD_VTYPE_NONE, 0),
84 * mcpu fw info in mem:
85 * in:
86 * (u64)a0=paddr to struct vnic_devcmd_fw_info
87 * action:
88 * Fills in struct vnic_devcmd_fw_info (128 bytes)
89 * note:
90 * An old definition of CMD_MCPU_FW_INFO
92 CMD_MCPU_FW_INFO_OLD = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 1),
95 * mcpu fw info in mem:
96 * in:
97 * (u64)a0=paddr to struct vnic_devcmd_fw_info
98 * (u16)a1=size of the structure
99 * out:
100 * (u16)a1=0 for in:a1 = 0,
101 * data size actually written for other values.
102 * action:
103 * Fills in first 128 bytes of vnic_devcmd_fw_info for in:a1 = 0,
104 * first in:a1 bytes for 0 < in:a1 <= 132,
105 * 132 bytes for other values of in:a1.
106 * note:
107 * CMD_MCPU_FW_INFO and CMD_MCPU_FW_INFO_OLD have the same enum 1
108 * for source compatibility.
110 CMD_MCPU_FW_INFO = _CMDC(_CMD_DIR_RW, _CMD_VTYPE_ALL, 1),
112 /* dev-specific block member:
113 * in: (u16)a0=offset,(u8)a1=size
114 * out: a0=value */
115 CMD_DEV_SPEC = _CMDC(_CMD_DIR_RW, _CMD_VTYPE_ALL, 2),
117 /* stats clear */
118 CMD_STATS_CLEAR = _CMDCNW(_CMD_DIR_NONE, _CMD_VTYPE_ALL, 3),
120 /* stats dump in mem: (u64)a0=paddr to stats area,
121 * (u16)a1=sizeof stats area */
122 CMD_STATS_DUMP = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 4),
124 /* set Rx packet filter: (u32)a0=filters (see CMD_PFILTER_*) */
125 CMD_PACKET_FILTER = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 7),
127 /* set Rx packet filter for all: (u32)a0=filters (see CMD_PFILTER_*) */
128 CMD_PACKET_FILTER_ALL = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 7),
130 /* hang detection notification */
131 CMD_HANG_NOTIFY = _CMDC(_CMD_DIR_NONE, _CMD_VTYPE_ALL, 8),
133 /* MAC address in (u48)a0 */
134 CMD_MAC_ADDR = _CMDC(_CMD_DIR_READ,
135 _CMD_VTYPE_ENET | _CMD_VTYPE_FC, 9),
137 /* add addr from (u48)a0 */
138 CMD_ADDR_ADD = _CMDCNW(_CMD_DIR_WRITE,
139 _CMD_VTYPE_ENET | _CMD_VTYPE_FC, 12),
141 /* del addr from (u48)a0 */
142 CMD_ADDR_DEL = _CMDCNW(_CMD_DIR_WRITE,
143 _CMD_VTYPE_ENET | _CMD_VTYPE_FC, 13),
145 /* add VLAN id in (u16)a0 */
146 CMD_VLAN_ADD = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 14),
148 /* del VLAN id in (u16)a0 */
149 CMD_VLAN_DEL = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 15),
151 /* nic_cfg in (u32)a0 */
152 CMD_NIC_CFG = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 16),
154 /* union vnic_rss_key in mem: (u64)a0=paddr, (u16)a1=len */
155 CMD_RSS_KEY = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 17),
157 /* union vnic_rss_cpu in mem: (u64)a0=paddr, (u16)a1=len */
158 CMD_RSS_CPU = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 18),
160 /* initiate softreset */
161 CMD_SOFT_RESET = _CMDCNW(_CMD_DIR_NONE, _CMD_VTYPE_ALL, 19),
163 /* softreset status:
164 * out: a0=0 reset complete, a0=1 reset in progress */
165 CMD_SOFT_RESET_STATUS = _CMDC(_CMD_DIR_READ, _CMD_VTYPE_ALL, 20),
167 /* set struct vnic_devcmd_notify buffer in mem:
168 * in:
169 * (u64)a0=paddr to notify (set paddr=0 to unset)
170 * (u32)a1 & 0x00000000ffffffff=sizeof(struct vnic_devcmd_notify)
171 * (u16)a1 & 0x0000ffff00000000=intr num (-1 for no intr)
172 * out:
173 * (u32)a1 = effective size
175 CMD_NOTIFY = _CMDC(_CMD_DIR_RW, _CMD_VTYPE_ALL, 21),
177 /* UNDI API: (u64)a0=paddr to s_PXENV_UNDI_ struct,
178 * (u8)a1=PXENV_UNDI_xxx */
179 CMD_UNDI = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 22),
181 /* initiate open sequence (u32)a0=flags (see CMD_OPENF_*) */
182 CMD_OPEN = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 23),
184 /* open status:
185 * out: a0=0 open complete, a0=1 open in progress */
186 CMD_OPEN_STATUS = _CMDC(_CMD_DIR_READ, _CMD_VTYPE_ALL, 24),
188 /* close vnic */
189 CMD_CLOSE = _CMDC(_CMD_DIR_NONE, _CMD_VTYPE_ALL, 25),
191 /* initialize virtual link: (u32)a0=flags (see CMD_INITF_*) */
192 /***** Replaced by CMD_INIT *****/
193 CMD_INIT_v1 = _CMDCNW(_CMD_DIR_READ, _CMD_VTYPE_ALL, 26),
195 /* variant of CMD_INIT, with provisioning info
196 * (u64)a0=paddr of vnic_devcmd_provinfo
197 * (u32)a1=sizeof provision info */
198 CMD_INIT_PROV_INFO = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 27),
200 /* enable virtual link */
201 CMD_ENABLE = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 28),
203 /* enable virtual link, waiting variant. */
204 CMD_ENABLE_WAIT = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 28),
206 /* disable virtual link */
207 CMD_DISABLE = _CMDC(_CMD_DIR_NONE, _CMD_VTYPE_ALL, 29),
209 /* stats dump sum of all vnic stats on same uplink in mem:
210 * (u64)a0=paddr
211 * (u16)a1=sizeof stats area */
212 CMD_STATS_DUMP_ALL = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 30),
214 /* init status:
215 * out: a0=0 init complete, a0=1 init in progress
216 * if a0=0, a1=errno */
217 CMD_INIT_STATUS = _CMDC(_CMD_DIR_READ, _CMD_VTYPE_ALL, 31),
219 /* INT13 API: (u64)a0=paddr to vnic_int13_params struct
220 * (u32)a1=INT13_CMD_xxx */
221 CMD_INT13 = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_FC, 32),
223 /* logical uplink enable/disable: (u64)a0: 0/1=disable/enable */
224 CMD_LOGICAL_UPLINK = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 33),
226 /* undo initialize of virtual link */
227 CMD_DEINIT = _CMDCNW(_CMD_DIR_NONE, _CMD_VTYPE_ALL, 34),
229 /* initialize virtual link: (u32)a0=flags (see CMD_INITF_*) */
230 CMD_INIT = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 35),
232 /* check fw capability of a cmd:
233 * in: (u32)a0=cmd
234 * out: (u32)a0=errno, 0:valid cmd, a1=supported VNIC_STF_* bits */
235 CMD_CAPABILITY = _CMDC(_CMD_DIR_RW, _CMD_VTYPE_ALL, 36),
237 /* persistent binding info
238 * in: (u64)a0=paddr of arg
239 * (u32)a1=CMD_PERBI_XXX */
240 CMD_PERBI = _CMDC(_CMD_DIR_RW, _CMD_VTYPE_FC, 37),
242 /* Interrupt Assert Register functionality
243 * in: (u16)a0=interrupt number to assert
245 CMD_IAR = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 38),
247 /* initiate hangreset, like softreset after hang detected */
248 CMD_HANG_RESET = _CMDC(_CMD_DIR_NONE, _CMD_VTYPE_ALL, 39),
250 /* hangreset status:
251 * out: a0=0 reset complete, a0=1 reset in progress */
252 CMD_HANG_RESET_STATUS = _CMDC(_CMD_DIR_READ, _CMD_VTYPE_ALL, 40),
255 * Set hw ingress packet vlan rewrite mode:
256 * in: (u32)a0=new vlan rewrite mode
257 * out: (u32)a0=old vlan rewrite mode */
258 CMD_IG_VLAN_REWRITE_MODE = _CMDC(_CMD_DIR_RW, _CMD_VTYPE_ENET, 41),
261 * in: (u16)a0=bdf of target vnic
262 * (u32)a1=cmd to proxy
263 * a2-a15=args to cmd in a1
264 * out: (u32)a0=status of proxied cmd
265 * a1-a15=out args of proxied cmd */
266 CMD_PROXY_BY_BDF = _CMDC(_CMD_DIR_RW, _CMD_VTYPE_ALL, 42),
269 * As for BY_BDF except a0 is index of hvnlink subordinate vnic
270 * or SR-IOV virtual vnic
272 CMD_PROXY_BY_INDEX = _CMDC(_CMD_DIR_RW, _CMD_VTYPE_ALL, 43),
275 * For HPP toggle:
276 * adapter-info-get
277 * in: (u64)a0=phsical address of buffer passed in from caller.
278 * (u16)a1=size of buffer specified in a0.
279 * out: (u64)a0=phsical address of buffer passed in from caller.
280 * (u16)a1=actual bytes from VIF-CONFIG-INFO TLV, or
281 * 0 if no VIF-CONFIG-INFO TLV was ever received. */
282 CMD_CONFIG_INFO_GET = _CMDC(_CMD_DIR_RW, _CMD_VTYPE_ALL, 44),
284 /* init_prov_info2:
285 * Variant of CMD_INIT_PROV_INFO, where it will not try to enable
286 * the vnic until CMD_ENABLE2 is issued.
287 * (u64)a0=paddr of vnic_devcmd_provinfo
288 * (u32)a1=sizeof provision info */
289 CMD_INIT_PROV_INFO2 = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 47),
291 /* enable2:
292 * (u32)a0=0 ==> standby
293 * =CMD_ENABLE2_ACTIVE ==> active
295 CMD_ENABLE2 = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 48),
298 * cmd_status:
299 * Returns the status of the specified command
300 * Input:
301 * a0 = command for which status is being queried.
302 * Possible values are:
303 * CMD_SOFT_RESET
304 * CMD_HANG_RESET
305 * CMD_OPEN
306 * CMD_INIT
307 * CMD_INIT_PROV_INFO
308 * CMD_DEINIT
309 * CMD_INIT_PROV_INFO2
310 * CMD_ENABLE2
311 * Output:
312 * if status == STAT_ERROR
313 * a0 = ERR_ENOTSUPPORTED - status for command in a0 is
314 * not supported
315 * if status == STAT_NONE
316 * a0 = status of the devcmd specified in a0 as follows.
317 * ERR_SUCCESS - command in a0 completed successfully
318 * ERR_EINPROGRESS - command in a0 is still in progress
320 CMD_STATUS = _CMDC(_CMD_DIR_RW, _CMD_VTYPE_ALL, 49),
323 /* CMD_ENABLE2 flags */
324 #define CMD_ENABLE2_ACTIVE 0x1
326 /* flags for CMD_OPEN */
327 #define CMD_OPENF_OPROM 0x1 /* open coming from option rom */
329 /* flags for CMD_INIT */
330 #define CMD_INITF_DEFAULT_MAC 0x1 /* init with default mac addr */
332 /* flags for CMD_PACKET_FILTER */
333 #define CMD_PFILTER_DIRECTED 0x01
334 #define CMD_PFILTER_MULTICAST 0x02
335 #define CMD_PFILTER_BROADCAST 0x04
336 #define CMD_PFILTER_PROMISCUOUS 0x08
337 #define CMD_PFILTER_ALL_MULTICAST 0x10
339 /* rewrite modes for CMD_IG_VLAN_REWRITE_MODE */
340 #define IG_VLAN_REWRITE_MODE_DEFAULT_TRUNK 0
341 #define IG_VLAN_REWRITE_MODE_UNTAG_DEFAULT_VLAN 1
342 #define IG_VLAN_REWRITE_MODE_PRIORITY_TAG_DEFAULT_VLAN 2
343 #define IG_VLAN_REWRITE_MODE_PASS_THRU 3
345 enum vnic_devcmd_status {
346 STAT_NONE = 0,
347 STAT_BUSY = 1 << 0, /* cmd in progress */
348 STAT_ERROR = 1 << 1, /* last cmd caused error (code in a0) */
351 enum vnic_devcmd_error {
352 ERR_SUCCESS = 0,
353 ERR_EINVAL = 1,
354 ERR_EFAULT = 2,
355 ERR_EPERM = 3,
356 ERR_EBUSY = 4,
357 ERR_ECMDUNKNOWN = 5,
358 ERR_EBADSTATE = 6,
359 ERR_ENOMEM = 7,
360 ERR_ETIMEDOUT = 8,
361 ERR_ELINKDOWN = 9,
362 ERR_EMAXRES = 10,
363 ERR_ENOTSUPPORTED = 11,
364 ERR_EINPROGRESS = 12,
368 * note: hw_version and asic_rev refer to the same thing,
369 * but have different formats. hw_version is
370 * a 32-byte string (e.g. "A2") and asic_rev is
371 * a 16-bit integer (e.g. 0xA2).
373 struct vnic_devcmd_fw_info {
374 char fw_version[32];
375 char fw_build[32];
376 char hw_version[32];
377 char hw_serial_number[32];
378 u16 asic_type;
379 u16 asic_rev;
382 struct vnic_devcmd_notify {
383 u32 csum; /* checksum over following words */
385 u32 link_state; /* link up == 1 */
386 u32 port_speed; /* effective port speed (rate limit) */
387 u32 mtu; /* MTU */
388 u32 msglvl; /* requested driver msg lvl */
389 u32 uif; /* uplink interface */
390 u32 status; /* status bits (see VNIC_STF_*) */
391 u32 error; /* error code (see ERR_*) for first ERR */
392 u32 link_down_cnt; /* running count of link down transitions */
393 u32 perbi_rebuild_cnt; /* running count of perbi rebuilds */
395 #define VNIC_STF_FATAL_ERR 0x0001 /* fatal fw error */
396 #define VNIC_STF_STD_PAUSE 0x0002 /* standard link-level pause on */
397 #define VNIC_STF_PFC_PAUSE 0x0004 /* priority flow control pause on */
398 /* all supported status flags */
399 #define VNIC_STF_ALL (VNIC_STF_FATAL_ERR |\
400 VNIC_STF_STD_PAUSE |\
401 VNIC_STF_PFC_PAUSE |\
404 struct vnic_devcmd_provinfo {
405 u8 oui[3];
406 u8 type;
407 u8 data[0];
411 * Writing cmd register causes STAT_BUSY to get set in status register.
412 * When cmd completes, STAT_BUSY will be cleared.
414 * If cmd completed successfully STAT_ERROR will be clear
415 * and args registers contain cmd-specific results.
417 * If cmd error, STAT_ERROR will be set and args[0] contains error code.
419 * status register is read-only. While STAT_BUSY is set,
420 * all other register contents are read-only.
423 /* Make sizeof(vnic_devcmd) a power-of-2 for I/O BAR. */
424 #define VNIC_DEVCMD_NARGS 15
425 struct vnic_devcmd {
426 u32 status; /* RO */
427 u32 cmd; /* RW */
428 u64 args[VNIC_DEVCMD_NARGS]; /* RW cmd args (little-endian) */
431 #endif /* _VNIC_DEVCMD_H_ */