ARM: 7409/1: Do not call flush_cache_user_range with mmap_sem held
[linux/fpc-iii.git] / drivers / net / ll_temac_main.c
blobb7948ccfcf7d4e4f2d51d724d7a32057767b9e20
1 /*
2 * Driver for Xilinx TEMAC Ethernet device
4 * Copyright (c) 2008 Nissin Systems Co., Ltd., Yoshio Kashiwagi
5 * Copyright (c) 2005-2008 DLA Systems, David H. Lynch Jr. <dhlii@dlasys.net>
6 * Copyright (c) 2008-2009 Secret Lab Technologies Ltd.
8 * This is a driver for the Xilinx ll_temac ipcore which is often used
9 * in the Virtex and Spartan series of chips.
11 * Notes:
12 * - The ll_temac hardware uses indirect access for many of the TEMAC
13 * registers, include the MDIO bus. However, indirect access to MDIO
14 * registers take considerably more clock cycles than to TEMAC registers.
15 * MDIO accesses are long, so threads doing them should probably sleep
16 * rather than busywait. However, since only one indirect access can be
17 * in progress at any given time, that means that *all* indirect accesses
18 * could end up sleeping (to wait for an MDIO access to complete).
19 * Fortunately none of the indirect accesses are on the 'hot' path for tx
20 * or rx, so this should be okay.
22 * TODO:
23 * - Factor out locallink DMA code into separate driver
24 * - Fix multicast assignment.
25 * - Fix support for hardware checksumming.
26 * - Testing. Lots and lots of testing.
30 #include <linux/delay.h>
31 #include <linux/etherdevice.h>
32 #include <linux/init.h>
33 #include <linux/mii.h>
34 #include <linux/module.h>
35 #include <linux/mutex.h>
36 #include <linux/netdevice.h>
37 #include <linux/of.h>
38 #include <linux/of_device.h>
39 #include <linux/of_mdio.h>
40 #include <linux/of_platform.h>
41 #include <linux/of_address.h>
42 #include <linux/skbuff.h>
43 #include <linux/spinlock.h>
44 #include <linux/tcp.h> /* needed for sizeof(tcphdr) */
45 #include <linux/udp.h> /* needed for sizeof(udphdr) */
46 #include <linux/phy.h>
47 #include <linux/in.h>
48 #include <linux/io.h>
49 #include <linux/ip.h>
50 #include <linux/slab.h>
52 #include "ll_temac.h"
54 #define TX_BD_NUM 64
55 #define RX_BD_NUM 128
57 /* ---------------------------------------------------------------------
58 * Low level register access functions
61 u32 temac_ior(struct temac_local *lp, int offset)
63 return in_be32((u32 *)(lp->regs + offset));
66 void temac_iow(struct temac_local *lp, int offset, u32 value)
68 out_be32((u32 *) (lp->regs + offset), value);
71 int temac_indirect_busywait(struct temac_local *lp)
73 long end = jiffies + 2;
75 while (!(temac_ior(lp, XTE_RDY0_OFFSET) & XTE_RDY0_HARD_ACS_RDY_MASK)) {
76 if (end - jiffies <= 0) {
77 WARN_ON(1);
78 return -ETIMEDOUT;
80 msleep(1);
82 return 0;
85 /**
86 * temac_indirect_in32
88 * lp->indirect_mutex must be held when calling this function
90 u32 temac_indirect_in32(struct temac_local *lp, int reg)
92 u32 val;
94 if (temac_indirect_busywait(lp))
95 return -ETIMEDOUT;
96 temac_iow(lp, XTE_CTL0_OFFSET, reg);
97 if (temac_indirect_busywait(lp))
98 return -ETIMEDOUT;
99 val = temac_ior(lp, XTE_LSW0_OFFSET);
101 return val;
105 * temac_indirect_out32
107 * lp->indirect_mutex must be held when calling this function
109 void temac_indirect_out32(struct temac_local *lp, int reg, u32 value)
111 if (temac_indirect_busywait(lp))
112 return;
113 temac_iow(lp, XTE_LSW0_OFFSET, value);
114 temac_iow(lp, XTE_CTL0_OFFSET, CNTLREG_WRITE_ENABLE_MASK | reg);
118 * temac_dma_in32 - Memory mapped DMA read, this function expects a
119 * register input that is based on DCR word addresses which
120 * are then converted to memory mapped byte addresses
122 static u32 temac_dma_in32(struct temac_local *lp, int reg)
124 return in_be32((u32 *)(lp->sdma_regs + (reg << 2)));
128 * temac_dma_out32 - Memory mapped DMA read, this function expects a
129 * register input that is based on DCR word addresses which
130 * are then converted to memory mapped byte addresses
132 static void temac_dma_out32(struct temac_local *lp, int reg, u32 value)
134 out_be32((u32 *)(lp->sdma_regs + (reg << 2)), value);
137 /* DMA register access functions can be DCR based or memory mapped.
138 * The PowerPC 440 is DCR based, the PowerPC 405 and MicroBlaze are both
139 * memory mapped.
141 #ifdef CONFIG_PPC_DCR
144 * temac_dma_dcr_in32 - DCR based DMA read
146 static u32 temac_dma_dcr_in(struct temac_local *lp, int reg)
148 return dcr_read(lp->sdma_dcrs, reg);
152 * temac_dma_dcr_out32 - DCR based DMA write
154 static void temac_dma_dcr_out(struct temac_local *lp, int reg, u32 value)
156 dcr_write(lp->sdma_dcrs, reg, value);
160 * temac_dcr_setup - If the DMA is DCR based, then setup the address and
161 * I/O functions
163 static int temac_dcr_setup(struct temac_local *lp, struct platform_device *op,
164 struct device_node *np)
166 unsigned int dcrs;
168 /* setup the dcr address mapping if it's in the device tree */
170 dcrs = dcr_resource_start(np, 0);
171 if (dcrs != 0) {
172 lp->sdma_dcrs = dcr_map(np, dcrs, dcr_resource_len(np, 0));
173 lp->dma_in = temac_dma_dcr_in;
174 lp->dma_out = temac_dma_dcr_out;
175 dev_dbg(&op->dev, "DCR base: %x\n", dcrs);
176 return 0;
178 /* no DCR in the device tree, indicate a failure */
179 return -1;
182 #else
185 * temac_dcr_setup - This is a stub for when DCR is not supported,
186 * such as with MicroBlaze
188 static int temac_dcr_setup(struct temac_local *lp, struct platform_device *op,
189 struct device_node *np)
191 return -1;
194 #endif
197 * * temac_dma_bd_release - Release buffer descriptor rings
199 static void temac_dma_bd_release(struct net_device *ndev)
201 struct temac_local *lp = netdev_priv(ndev);
202 int i;
204 for (i = 0; i < RX_BD_NUM; i++) {
205 if (!lp->rx_skb[i])
206 break;
207 else {
208 dma_unmap_single(ndev->dev.parent, lp->rx_bd_v[i].phys,
209 XTE_MAX_JUMBO_FRAME_SIZE, DMA_FROM_DEVICE);
210 dev_kfree_skb(lp->rx_skb[i]);
213 if (lp->rx_bd_v)
214 dma_free_coherent(ndev->dev.parent,
215 sizeof(*lp->rx_bd_v) * RX_BD_NUM,
216 lp->rx_bd_v, lp->rx_bd_p);
217 if (lp->tx_bd_v)
218 dma_free_coherent(ndev->dev.parent,
219 sizeof(*lp->tx_bd_v) * TX_BD_NUM,
220 lp->tx_bd_v, lp->tx_bd_p);
221 if (lp->rx_skb)
222 kfree(lp->rx_skb);
226 * temac_dma_bd_init - Setup buffer descriptor rings
228 static int temac_dma_bd_init(struct net_device *ndev)
230 struct temac_local *lp = netdev_priv(ndev);
231 struct sk_buff *skb;
232 int i;
234 lp->rx_skb = kzalloc(sizeof(*lp->rx_skb) * RX_BD_NUM, GFP_KERNEL);
235 if (!lp->rx_skb) {
236 dev_err(&ndev->dev,
237 "can't allocate memory for DMA RX buffer\n");
238 goto out;
240 /* allocate the tx and rx ring buffer descriptors. */
241 /* returns a virtual address and a physical address. */
242 lp->tx_bd_v = dma_alloc_coherent(ndev->dev.parent,
243 sizeof(*lp->tx_bd_v) * TX_BD_NUM,
244 &lp->tx_bd_p, GFP_KERNEL);
245 if (!lp->tx_bd_v) {
246 dev_err(&ndev->dev,
247 "unable to allocate DMA TX buffer descriptors");
248 goto out;
250 lp->rx_bd_v = dma_alloc_coherent(ndev->dev.parent,
251 sizeof(*lp->rx_bd_v) * RX_BD_NUM,
252 &lp->rx_bd_p, GFP_KERNEL);
253 if (!lp->rx_bd_v) {
254 dev_err(&ndev->dev,
255 "unable to allocate DMA RX buffer descriptors");
256 goto out;
259 memset(lp->tx_bd_v, 0, sizeof(*lp->tx_bd_v) * TX_BD_NUM);
260 for (i = 0; i < TX_BD_NUM; i++) {
261 lp->tx_bd_v[i].next = lp->tx_bd_p +
262 sizeof(*lp->tx_bd_v) * ((i + 1) % TX_BD_NUM);
265 memset(lp->rx_bd_v, 0, sizeof(*lp->rx_bd_v) * RX_BD_NUM);
266 for (i = 0; i < RX_BD_NUM; i++) {
267 lp->rx_bd_v[i].next = lp->rx_bd_p +
268 sizeof(*lp->rx_bd_v) * ((i + 1) % RX_BD_NUM);
270 skb = netdev_alloc_skb_ip_align(ndev,
271 XTE_MAX_JUMBO_FRAME_SIZE);
273 if (skb == 0) {
274 dev_err(&ndev->dev, "alloc_skb error %d\n", i);
275 goto out;
277 lp->rx_skb[i] = skb;
278 /* returns physical address of skb->data */
279 lp->rx_bd_v[i].phys = dma_map_single(ndev->dev.parent,
280 skb->data,
281 XTE_MAX_JUMBO_FRAME_SIZE,
282 DMA_FROM_DEVICE);
283 lp->rx_bd_v[i].len = XTE_MAX_JUMBO_FRAME_SIZE;
284 lp->rx_bd_v[i].app0 = STS_CTRL_APP0_IRQONEND;
287 lp->dma_out(lp, TX_CHNL_CTRL, 0x10220400 |
288 CHNL_CTRL_IRQ_EN |
289 CHNL_CTRL_IRQ_DLY_EN |
290 CHNL_CTRL_IRQ_COAL_EN);
291 /* 0x10220483 */
292 /* 0x00100483 */
293 lp->dma_out(lp, RX_CHNL_CTRL, 0xff070000 |
294 CHNL_CTRL_IRQ_EN |
295 CHNL_CTRL_IRQ_DLY_EN |
296 CHNL_CTRL_IRQ_COAL_EN |
297 CHNL_CTRL_IRQ_IOE);
298 /* 0xff010283 */
300 lp->dma_out(lp, RX_CURDESC_PTR, lp->rx_bd_p);
301 lp->dma_out(lp, RX_TAILDESC_PTR,
302 lp->rx_bd_p + (sizeof(*lp->rx_bd_v) * (RX_BD_NUM - 1)));
303 lp->dma_out(lp, TX_CURDESC_PTR, lp->tx_bd_p);
305 return 0;
307 out:
308 temac_dma_bd_release(ndev);
309 return -ENOMEM;
312 /* ---------------------------------------------------------------------
313 * net_device_ops
316 static int temac_set_mac_address(struct net_device *ndev, void *address)
318 struct temac_local *lp = netdev_priv(ndev);
320 if (address)
321 memcpy(ndev->dev_addr, address, ETH_ALEN);
323 if (!is_valid_ether_addr(ndev->dev_addr))
324 random_ether_addr(ndev->dev_addr);
326 /* set up unicast MAC address filter set its mac address */
327 mutex_lock(&lp->indirect_mutex);
328 temac_indirect_out32(lp, XTE_UAW0_OFFSET,
329 (ndev->dev_addr[0]) |
330 (ndev->dev_addr[1] << 8) |
331 (ndev->dev_addr[2] << 16) |
332 (ndev->dev_addr[3] << 24));
333 /* There are reserved bits in EUAW1
334 * so don't affect them Set MAC bits [47:32] in EUAW1 */
335 temac_indirect_out32(lp, XTE_UAW1_OFFSET,
336 (ndev->dev_addr[4] & 0x000000ff) |
337 (ndev->dev_addr[5] << 8));
338 mutex_unlock(&lp->indirect_mutex);
340 return 0;
343 static int netdev_set_mac_address(struct net_device *ndev, void *p)
345 struct sockaddr *addr = p;
347 return temac_set_mac_address(ndev, addr->sa_data);
350 static void temac_set_multicast_list(struct net_device *ndev)
352 struct temac_local *lp = netdev_priv(ndev);
353 u32 multi_addr_msw, multi_addr_lsw, val;
354 int i;
356 mutex_lock(&lp->indirect_mutex);
357 if (ndev->flags & (IFF_ALLMULTI | IFF_PROMISC) ||
358 netdev_mc_count(ndev) > MULTICAST_CAM_TABLE_NUM) {
360 * We must make the kernel realise we had to move
361 * into promisc mode or we start all out war on
362 * the cable. If it was a promisc request the
363 * flag is already set. If not we assert it.
365 ndev->flags |= IFF_PROMISC;
366 temac_indirect_out32(lp, XTE_AFM_OFFSET, XTE_AFM_EPPRM_MASK);
367 dev_info(&ndev->dev, "Promiscuous mode enabled.\n");
368 } else if (!netdev_mc_empty(ndev)) {
369 struct netdev_hw_addr *ha;
371 i = 0;
372 netdev_for_each_mc_addr(ha, ndev) {
373 if (i >= MULTICAST_CAM_TABLE_NUM)
374 break;
375 multi_addr_msw = ((ha->addr[3] << 24) |
376 (ha->addr[2] << 16) |
377 (ha->addr[1] << 8) |
378 (ha->addr[0]));
379 temac_indirect_out32(lp, XTE_MAW0_OFFSET,
380 multi_addr_msw);
381 multi_addr_lsw = ((ha->addr[5] << 8) |
382 (ha->addr[4]) | (i << 16));
383 temac_indirect_out32(lp, XTE_MAW1_OFFSET,
384 multi_addr_lsw);
385 i++;
387 } else {
388 val = temac_indirect_in32(lp, XTE_AFM_OFFSET);
389 temac_indirect_out32(lp, XTE_AFM_OFFSET,
390 val & ~XTE_AFM_EPPRM_MASK);
391 temac_indirect_out32(lp, XTE_MAW0_OFFSET, 0);
392 temac_indirect_out32(lp, XTE_MAW1_OFFSET, 0);
393 dev_info(&ndev->dev, "Promiscuous mode disabled.\n");
395 mutex_unlock(&lp->indirect_mutex);
398 struct temac_option {
399 int flg;
400 u32 opt;
401 u32 reg;
402 u32 m_or;
403 u32 m_and;
404 } temac_options[] = {
405 /* Turn on jumbo packet support for both Rx and Tx */
407 .opt = XTE_OPTION_JUMBO,
408 .reg = XTE_TXC_OFFSET,
409 .m_or = XTE_TXC_TXJMBO_MASK,
412 .opt = XTE_OPTION_JUMBO,
413 .reg = XTE_RXC1_OFFSET,
414 .m_or =XTE_RXC1_RXJMBO_MASK,
416 /* Turn on VLAN packet support for both Rx and Tx */
418 .opt = XTE_OPTION_VLAN,
419 .reg = XTE_TXC_OFFSET,
420 .m_or =XTE_TXC_TXVLAN_MASK,
423 .opt = XTE_OPTION_VLAN,
424 .reg = XTE_RXC1_OFFSET,
425 .m_or =XTE_RXC1_RXVLAN_MASK,
427 /* Turn on FCS stripping on receive packets */
429 .opt = XTE_OPTION_FCS_STRIP,
430 .reg = XTE_RXC1_OFFSET,
431 .m_or =XTE_RXC1_RXFCS_MASK,
433 /* Turn on FCS insertion on transmit packets */
435 .opt = XTE_OPTION_FCS_INSERT,
436 .reg = XTE_TXC_OFFSET,
437 .m_or =XTE_TXC_TXFCS_MASK,
439 /* Turn on length/type field checking on receive packets */
441 .opt = XTE_OPTION_LENTYPE_ERR,
442 .reg = XTE_RXC1_OFFSET,
443 .m_or =XTE_RXC1_RXLT_MASK,
445 /* Turn on flow control */
447 .opt = XTE_OPTION_FLOW_CONTROL,
448 .reg = XTE_FCC_OFFSET,
449 .m_or =XTE_FCC_RXFLO_MASK,
451 /* Turn on flow control */
453 .opt = XTE_OPTION_FLOW_CONTROL,
454 .reg = XTE_FCC_OFFSET,
455 .m_or =XTE_FCC_TXFLO_MASK,
457 /* Turn on promiscuous frame filtering (all frames are received ) */
459 .opt = XTE_OPTION_PROMISC,
460 .reg = XTE_AFM_OFFSET,
461 .m_or =XTE_AFM_EPPRM_MASK,
463 /* Enable transmitter if not already enabled */
465 .opt = XTE_OPTION_TXEN,
466 .reg = XTE_TXC_OFFSET,
467 .m_or =XTE_TXC_TXEN_MASK,
469 /* Enable receiver? */
471 .opt = XTE_OPTION_RXEN,
472 .reg = XTE_RXC1_OFFSET,
473 .m_or =XTE_RXC1_RXEN_MASK,
479 * temac_setoptions
481 static u32 temac_setoptions(struct net_device *ndev, u32 options)
483 struct temac_local *lp = netdev_priv(ndev);
484 struct temac_option *tp = &temac_options[0];
485 int reg;
487 mutex_lock(&lp->indirect_mutex);
488 while (tp->opt) {
489 reg = temac_indirect_in32(lp, tp->reg) & ~tp->m_or;
490 if (options & tp->opt)
491 reg |= tp->m_or;
492 temac_indirect_out32(lp, tp->reg, reg);
493 tp++;
495 lp->options |= options;
496 mutex_unlock(&lp->indirect_mutex);
498 return 0;
501 /* Initialize temac */
502 static void temac_device_reset(struct net_device *ndev)
504 struct temac_local *lp = netdev_priv(ndev);
505 u32 timeout;
506 u32 val;
508 /* Perform a software reset */
510 /* 0x300 host enable bit ? */
511 /* reset PHY through control register ?:1 */
513 dev_dbg(&ndev->dev, "%s()\n", __func__);
515 mutex_lock(&lp->indirect_mutex);
516 /* Reset the receiver and wait for it to finish reset */
517 temac_indirect_out32(lp, XTE_RXC1_OFFSET, XTE_RXC1_RXRST_MASK);
518 timeout = 1000;
519 while (temac_indirect_in32(lp, XTE_RXC1_OFFSET) & XTE_RXC1_RXRST_MASK) {
520 udelay(1);
521 if (--timeout == 0) {
522 dev_err(&ndev->dev,
523 "temac_device_reset RX reset timeout!!\n");
524 break;
528 /* Reset the transmitter and wait for it to finish reset */
529 temac_indirect_out32(lp, XTE_TXC_OFFSET, XTE_TXC_TXRST_MASK);
530 timeout = 1000;
531 while (temac_indirect_in32(lp, XTE_TXC_OFFSET) & XTE_TXC_TXRST_MASK) {
532 udelay(1);
533 if (--timeout == 0) {
534 dev_err(&ndev->dev,
535 "temac_device_reset TX reset timeout!!\n");
536 break;
540 /* Disable the receiver */
541 val = temac_indirect_in32(lp, XTE_RXC1_OFFSET);
542 temac_indirect_out32(lp, XTE_RXC1_OFFSET, val & ~XTE_RXC1_RXEN_MASK);
544 /* Reset Local Link (DMA) */
545 lp->dma_out(lp, DMA_CONTROL_REG, DMA_CONTROL_RST);
546 timeout = 1000;
547 while (lp->dma_in(lp, DMA_CONTROL_REG) & DMA_CONTROL_RST) {
548 udelay(1);
549 if (--timeout == 0) {
550 dev_err(&ndev->dev,
551 "temac_device_reset DMA reset timeout!!\n");
552 break;
555 lp->dma_out(lp, DMA_CONTROL_REG, DMA_TAIL_ENABLE);
557 if (temac_dma_bd_init(ndev)) {
558 dev_err(&ndev->dev,
559 "temac_device_reset descriptor allocation failed\n");
562 temac_indirect_out32(lp, XTE_RXC0_OFFSET, 0);
563 temac_indirect_out32(lp, XTE_RXC1_OFFSET, 0);
564 temac_indirect_out32(lp, XTE_TXC_OFFSET, 0);
565 temac_indirect_out32(lp, XTE_FCC_OFFSET, XTE_FCC_RXFLO_MASK);
567 mutex_unlock(&lp->indirect_mutex);
569 /* Sync default options with HW
570 * but leave receiver and transmitter disabled. */
571 temac_setoptions(ndev,
572 lp->options & ~(XTE_OPTION_TXEN | XTE_OPTION_RXEN));
574 temac_set_mac_address(ndev, NULL);
576 /* Set address filter table */
577 temac_set_multicast_list(ndev);
578 if (temac_setoptions(ndev, lp->options))
579 dev_err(&ndev->dev, "Error setting TEMAC options\n");
581 /* Init Driver variable */
582 ndev->trans_start = jiffies; /* prevent tx timeout */
585 void temac_adjust_link(struct net_device *ndev)
587 struct temac_local *lp = netdev_priv(ndev);
588 struct phy_device *phy = lp->phy_dev;
589 u32 mii_speed;
590 int link_state;
592 /* hash together the state values to decide if something has changed */
593 link_state = phy->speed | (phy->duplex << 1) | phy->link;
595 mutex_lock(&lp->indirect_mutex);
596 if (lp->last_link != link_state) {
597 mii_speed = temac_indirect_in32(lp, XTE_EMCFG_OFFSET);
598 mii_speed &= ~XTE_EMCFG_LINKSPD_MASK;
600 switch (phy->speed) {
601 case SPEED_1000: mii_speed |= XTE_EMCFG_LINKSPD_1000; break;
602 case SPEED_100: mii_speed |= XTE_EMCFG_LINKSPD_100; break;
603 case SPEED_10: mii_speed |= XTE_EMCFG_LINKSPD_10; break;
606 /* Write new speed setting out to TEMAC */
607 temac_indirect_out32(lp, XTE_EMCFG_OFFSET, mii_speed);
608 lp->last_link = link_state;
609 phy_print_status(phy);
611 mutex_unlock(&lp->indirect_mutex);
614 static void temac_start_xmit_done(struct net_device *ndev)
616 struct temac_local *lp = netdev_priv(ndev);
617 struct cdmac_bd *cur_p;
618 unsigned int stat = 0;
620 cur_p = &lp->tx_bd_v[lp->tx_bd_ci];
621 stat = cur_p->app0;
623 while (stat & STS_CTRL_APP0_CMPLT) {
624 dma_unmap_single(ndev->dev.parent, cur_p->phys, cur_p->len,
625 DMA_TO_DEVICE);
626 if (cur_p->app4)
627 dev_kfree_skb_irq((struct sk_buff *)cur_p->app4);
628 cur_p->app0 = 0;
629 cur_p->app1 = 0;
630 cur_p->app2 = 0;
631 cur_p->app3 = 0;
632 cur_p->app4 = 0;
634 ndev->stats.tx_packets++;
635 ndev->stats.tx_bytes += cur_p->len;
637 lp->tx_bd_ci++;
638 if (lp->tx_bd_ci >= TX_BD_NUM)
639 lp->tx_bd_ci = 0;
641 cur_p = &lp->tx_bd_v[lp->tx_bd_ci];
642 stat = cur_p->app0;
645 netif_wake_queue(ndev);
648 static inline int temac_check_tx_bd_space(struct temac_local *lp, int num_frag)
650 struct cdmac_bd *cur_p;
651 int tail;
653 tail = lp->tx_bd_tail;
654 cur_p = &lp->tx_bd_v[tail];
656 do {
657 if (cur_p->app0)
658 return NETDEV_TX_BUSY;
660 tail++;
661 if (tail >= TX_BD_NUM)
662 tail = 0;
664 cur_p = &lp->tx_bd_v[tail];
665 num_frag--;
666 } while (num_frag >= 0);
668 return 0;
671 static int temac_start_xmit(struct sk_buff *skb, struct net_device *ndev)
673 struct temac_local *lp = netdev_priv(ndev);
674 struct cdmac_bd *cur_p;
675 dma_addr_t start_p, tail_p;
676 int ii;
677 unsigned long num_frag;
678 skb_frag_t *frag;
680 num_frag = skb_shinfo(skb)->nr_frags;
681 frag = &skb_shinfo(skb)->frags[0];
682 start_p = lp->tx_bd_p + sizeof(*lp->tx_bd_v) * lp->tx_bd_tail;
683 cur_p = &lp->tx_bd_v[lp->tx_bd_tail];
685 if (temac_check_tx_bd_space(lp, num_frag)) {
686 if (!netif_queue_stopped(ndev)) {
687 netif_stop_queue(ndev);
688 return NETDEV_TX_BUSY;
690 return NETDEV_TX_BUSY;
693 cur_p->app0 = 0;
694 if (skb->ip_summed == CHECKSUM_PARTIAL) {
695 unsigned int csum_start_off = skb_checksum_start_offset(skb);
696 unsigned int csum_index_off = csum_start_off + skb->csum_offset;
698 cur_p->app0 |= 1; /* TX Checksum Enabled */
699 cur_p->app1 = (csum_start_off << 16) | csum_index_off;
700 cur_p->app2 = 0; /* initial checksum seed */
703 cur_p->app0 |= STS_CTRL_APP0_SOP;
704 cur_p->len = skb_headlen(skb);
705 cur_p->phys = dma_map_single(ndev->dev.parent, skb->data, skb->len,
706 DMA_TO_DEVICE);
707 cur_p->app4 = (unsigned long)skb;
709 for (ii = 0; ii < num_frag; ii++) {
710 lp->tx_bd_tail++;
711 if (lp->tx_bd_tail >= TX_BD_NUM)
712 lp->tx_bd_tail = 0;
714 cur_p = &lp->tx_bd_v[lp->tx_bd_tail];
715 cur_p->phys = dma_map_single(ndev->dev.parent,
716 (void *)page_address(frag->page) +
717 frag->page_offset,
718 frag->size, DMA_TO_DEVICE);
719 cur_p->len = frag->size;
720 cur_p->app0 = 0;
721 frag++;
723 cur_p->app0 |= STS_CTRL_APP0_EOP;
725 tail_p = lp->tx_bd_p + sizeof(*lp->tx_bd_v) * lp->tx_bd_tail;
726 lp->tx_bd_tail++;
727 if (lp->tx_bd_tail >= TX_BD_NUM)
728 lp->tx_bd_tail = 0;
730 /* Kick off the transfer */
731 lp->dma_out(lp, TX_TAILDESC_PTR, tail_p); /* DMA start */
733 return NETDEV_TX_OK;
737 static void ll_temac_recv(struct net_device *ndev)
739 struct temac_local *lp = netdev_priv(ndev);
740 struct sk_buff *skb, *new_skb;
741 unsigned int bdstat;
742 struct cdmac_bd *cur_p;
743 dma_addr_t tail_p;
744 int length;
745 unsigned long flags;
747 spin_lock_irqsave(&lp->rx_lock, flags);
749 tail_p = lp->rx_bd_p + sizeof(*lp->rx_bd_v) * lp->rx_bd_ci;
750 cur_p = &lp->rx_bd_v[lp->rx_bd_ci];
752 bdstat = cur_p->app0;
753 while ((bdstat & STS_CTRL_APP0_CMPLT)) {
755 skb = lp->rx_skb[lp->rx_bd_ci];
756 length = cur_p->app4 & 0x3FFF;
758 dma_unmap_single(ndev->dev.parent, cur_p->phys, length,
759 DMA_FROM_DEVICE);
761 skb_put(skb, length);
762 skb->dev = ndev;
763 skb->protocol = eth_type_trans(skb, ndev);
764 skb_checksum_none_assert(skb);
766 /* if we're doing rx csum offload, set it up */
767 if (((lp->temac_features & TEMAC_FEATURE_RX_CSUM) != 0) &&
768 (skb->protocol == __constant_htons(ETH_P_IP)) &&
769 (skb->len > 64)) {
771 skb->csum = cur_p->app3 & 0xFFFF;
772 skb->ip_summed = CHECKSUM_COMPLETE;
775 netif_rx(skb);
777 ndev->stats.rx_packets++;
778 ndev->stats.rx_bytes += length;
780 new_skb = netdev_alloc_skb_ip_align(ndev,
781 XTE_MAX_JUMBO_FRAME_SIZE);
783 if (new_skb == 0) {
784 dev_err(&ndev->dev, "no memory for new sk_buff\n");
785 spin_unlock_irqrestore(&lp->rx_lock, flags);
786 return;
789 cur_p->app0 = STS_CTRL_APP0_IRQONEND;
790 cur_p->phys = dma_map_single(ndev->dev.parent, new_skb->data,
791 XTE_MAX_JUMBO_FRAME_SIZE,
792 DMA_FROM_DEVICE);
793 cur_p->len = XTE_MAX_JUMBO_FRAME_SIZE;
794 lp->rx_skb[lp->rx_bd_ci] = new_skb;
796 lp->rx_bd_ci++;
797 if (lp->rx_bd_ci >= RX_BD_NUM)
798 lp->rx_bd_ci = 0;
800 cur_p = &lp->rx_bd_v[lp->rx_bd_ci];
801 bdstat = cur_p->app0;
803 lp->dma_out(lp, RX_TAILDESC_PTR, tail_p);
805 spin_unlock_irqrestore(&lp->rx_lock, flags);
808 static irqreturn_t ll_temac_tx_irq(int irq, void *_ndev)
810 struct net_device *ndev = _ndev;
811 struct temac_local *lp = netdev_priv(ndev);
812 unsigned int status;
814 status = lp->dma_in(lp, TX_IRQ_REG);
815 lp->dma_out(lp, TX_IRQ_REG, status);
817 if (status & (IRQ_COAL | IRQ_DLY))
818 temac_start_xmit_done(lp->ndev);
819 if (status & 0x080)
820 dev_err(&ndev->dev, "DMA error 0x%x\n", status);
822 return IRQ_HANDLED;
825 static irqreturn_t ll_temac_rx_irq(int irq, void *_ndev)
827 struct net_device *ndev = _ndev;
828 struct temac_local *lp = netdev_priv(ndev);
829 unsigned int status;
831 /* Read and clear the status registers */
832 status = lp->dma_in(lp, RX_IRQ_REG);
833 lp->dma_out(lp, RX_IRQ_REG, status);
835 if (status & (IRQ_COAL | IRQ_DLY))
836 ll_temac_recv(lp->ndev);
838 return IRQ_HANDLED;
841 static int temac_open(struct net_device *ndev)
843 struct temac_local *lp = netdev_priv(ndev);
844 int rc;
846 dev_dbg(&ndev->dev, "temac_open()\n");
848 if (lp->phy_node) {
849 lp->phy_dev = of_phy_connect(lp->ndev, lp->phy_node,
850 temac_adjust_link, 0, 0);
851 if (!lp->phy_dev) {
852 dev_err(lp->dev, "of_phy_connect() failed\n");
853 return -ENODEV;
856 phy_start(lp->phy_dev);
859 rc = request_irq(lp->tx_irq, ll_temac_tx_irq, 0, ndev->name, ndev);
860 if (rc)
861 goto err_tx_irq;
862 rc = request_irq(lp->rx_irq, ll_temac_rx_irq, 0, ndev->name, ndev);
863 if (rc)
864 goto err_rx_irq;
866 temac_device_reset(ndev);
867 return 0;
869 err_rx_irq:
870 free_irq(lp->tx_irq, ndev);
871 err_tx_irq:
872 if (lp->phy_dev)
873 phy_disconnect(lp->phy_dev);
874 lp->phy_dev = NULL;
875 dev_err(lp->dev, "request_irq() failed\n");
876 return rc;
879 static int temac_stop(struct net_device *ndev)
881 struct temac_local *lp = netdev_priv(ndev);
883 dev_dbg(&ndev->dev, "temac_close()\n");
885 free_irq(lp->tx_irq, ndev);
886 free_irq(lp->rx_irq, ndev);
888 if (lp->phy_dev)
889 phy_disconnect(lp->phy_dev);
890 lp->phy_dev = NULL;
892 temac_dma_bd_release(ndev);
894 return 0;
897 #ifdef CONFIG_NET_POLL_CONTROLLER
898 static void
899 temac_poll_controller(struct net_device *ndev)
901 struct temac_local *lp = netdev_priv(ndev);
903 disable_irq(lp->tx_irq);
904 disable_irq(lp->rx_irq);
906 ll_temac_rx_irq(lp->tx_irq, ndev);
907 ll_temac_tx_irq(lp->rx_irq, ndev);
909 enable_irq(lp->tx_irq);
910 enable_irq(lp->rx_irq);
912 #endif
914 static const struct net_device_ops temac_netdev_ops = {
915 .ndo_open = temac_open,
916 .ndo_stop = temac_stop,
917 .ndo_start_xmit = temac_start_xmit,
918 .ndo_set_mac_address = netdev_set_mac_address,
919 .ndo_validate_addr = eth_validate_addr,
920 //.ndo_set_multicast_list = temac_set_multicast_list,
921 #ifdef CONFIG_NET_POLL_CONTROLLER
922 .ndo_poll_controller = temac_poll_controller,
923 #endif
926 /* ---------------------------------------------------------------------
927 * SYSFS device attributes
929 static ssize_t temac_show_llink_regs(struct device *dev,
930 struct device_attribute *attr, char *buf)
932 struct net_device *ndev = dev_get_drvdata(dev);
933 struct temac_local *lp = netdev_priv(ndev);
934 int i, len = 0;
936 for (i = 0; i < 0x11; i++)
937 len += sprintf(buf + len, "%.8x%s", lp->dma_in(lp, i),
938 (i % 8) == 7 ? "\n" : " ");
939 len += sprintf(buf + len, "\n");
941 return len;
944 static DEVICE_ATTR(llink_regs, 0440, temac_show_llink_regs, NULL);
946 static struct attribute *temac_device_attrs[] = {
947 &dev_attr_llink_regs.attr,
948 NULL,
951 static const struct attribute_group temac_attr_group = {
952 .attrs = temac_device_attrs,
955 static int __devinit temac_of_probe(struct platform_device *op)
957 struct device_node *np;
958 struct temac_local *lp;
959 struct net_device *ndev;
960 const void *addr;
961 __be32 *p;
962 int size, rc = 0;
964 /* Init network device structure */
965 ndev = alloc_etherdev(sizeof(*lp));
966 if (!ndev) {
967 dev_err(&op->dev, "could not allocate device.\n");
968 return -ENOMEM;
970 ether_setup(ndev);
971 dev_set_drvdata(&op->dev, ndev);
972 SET_NETDEV_DEV(ndev, &op->dev);
973 ndev->flags &= ~IFF_MULTICAST; /* clear multicast */
974 ndev->features = NETIF_F_SG | NETIF_F_FRAGLIST;
975 ndev->netdev_ops = &temac_netdev_ops;
976 #if 0
977 ndev->features |= NETIF_F_IP_CSUM; /* Can checksum TCP/UDP over IPv4. */
978 ndev->features |= NETIF_F_HW_CSUM; /* Can checksum all the packets. */
979 ndev->features |= NETIF_F_IPV6_CSUM; /* Can checksum IPV6 TCP/UDP */
980 ndev->features |= NETIF_F_HIGHDMA; /* Can DMA to high memory. */
981 ndev->features |= NETIF_F_HW_VLAN_TX; /* Transmit VLAN hw accel */
982 ndev->features |= NETIF_F_HW_VLAN_RX; /* Receive VLAN hw acceleration */
983 ndev->features |= NETIF_F_HW_VLAN_FILTER; /* Receive VLAN filtering */
984 ndev->features |= NETIF_F_VLAN_CHALLENGED; /* cannot handle VLAN pkts */
985 ndev->features |= NETIF_F_GSO; /* Enable software GSO. */
986 ndev->features |= NETIF_F_MULTI_QUEUE; /* Has multiple TX/RX queues */
987 ndev->features |= NETIF_F_LRO; /* large receive offload */
988 #endif
990 /* setup temac private info structure */
991 lp = netdev_priv(ndev);
992 lp->ndev = ndev;
993 lp->dev = &op->dev;
994 lp->options = XTE_OPTION_DEFAULTS;
995 spin_lock_init(&lp->rx_lock);
996 mutex_init(&lp->indirect_mutex);
998 /* map device registers */
999 lp->regs = of_iomap(op->dev.of_node, 0);
1000 if (!lp->regs) {
1001 dev_err(&op->dev, "could not map temac regs.\n");
1002 goto nodev;
1005 /* Setup checksum offload, but default to off if not specified */
1006 lp->temac_features = 0;
1007 p = (__be32 *)of_get_property(op->dev.of_node, "xlnx,txcsum", NULL);
1008 if (p && be32_to_cpu(*p)) {
1009 lp->temac_features |= TEMAC_FEATURE_TX_CSUM;
1010 /* Can checksum TCP/UDP over IPv4. */
1011 ndev->features |= NETIF_F_IP_CSUM;
1013 p = (__be32 *)of_get_property(op->dev.of_node, "xlnx,rxcsum", NULL);
1014 if (p && be32_to_cpu(*p))
1015 lp->temac_features |= TEMAC_FEATURE_RX_CSUM;
1017 /* Find the DMA node, map the DMA registers, and decode the DMA IRQs */
1018 np = of_parse_phandle(op->dev.of_node, "llink-connected", 0);
1019 if (!np) {
1020 dev_err(&op->dev, "could not find DMA node\n");
1021 goto err_iounmap;
1024 /* Setup the DMA register accesses, could be DCR or memory mapped */
1025 if (temac_dcr_setup(lp, op, np)) {
1027 /* no DCR in the device tree, try non-DCR */
1028 lp->sdma_regs = of_iomap(np, 0);
1029 if (lp->sdma_regs) {
1030 lp->dma_in = temac_dma_in32;
1031 lp->dma_out = temac_dma_out32;
1032 dev_dbg(&op->dev, "MEM base: %p\n", lp->sdma_regs);
1033 } else {
1034 dev_err(&op->dev, "unable to map DMA registers\n");
1035 of_node_put(np);
1036 goto err_iounmap;
1040 lp->rx_irq = irq_of_parse_and_map(np, 0);
1041 lp->tx_irq = irq_of_parse_and_map(np, 1);
1043 of_node_put(np); /* Finished with the DMA node; drop the reference */
1045 if ((lp->rx_irq == NO_IRQ) || (lp->tx_irq == NO_IRQ)) {
1046 dev_err(&op->dev, "could not determine irqs\n");
1047 rc = -ENOMEM;
1048 goto err_iounmap_2;
1052 /* Retrieve the MAC address */
1053 addr = of_get_property(op->dev.of_node, "local-mac-address", &size);
1054 if ((!addr) || (size != 6)) {
1055 dev_err(&op->dev, "could not find MAC address\n");
1056 rc = -ENODEV;
1057 goto err_iounmap_2;
1059 temac_set_mac_address(ndev, (void *)addr);
1061 rc = temac_mdio_setup(lp, op->dev.of_node);
1062 if (rc)
1063 dev_warn(&op->dev, "error registering MDIO bus\n");
1065 lp->phy_node = of_parse_phandle(op->dev.of_node, "phy-handle", 0);
1066 if (lp->phy_node)
1067 dev_dbg(lp->dev, "using PHY node %s (%p)\n", np->full_name, np);
1069 /* Add the device attributes */
1070 rc = sysfs_create_group(&lp->dev->kobj, &temac_attr_group);
1071 if (rc) {
1072 dev_err(lp->dev, "Error creating sysfs files\n");
1073 goto err_iounmap_2;
1076 rc = register_netdev(lp->ndev);
1077 if (rc) {
1078 dev_err(lp->dev, "register_netdev() error (%i)\n", rc);
1079 goto err_register_ndev;
1082 return 0;
1084 err_register_ndev:
1085 sysfs_remove_group(&lp->dev->kobj, &temac_attr_group);
1086 err_iounmap_2:
1087 if (lp->sdma_regs)
1088 iounmap(lp->sdma_regs);
1089 err_iounmap:
1090 iounmap(lp->regs);
1091 nodev:
1092 free_netdev(ndev);
1093 ndev = NULL;
1094 return rc;
1097 static int __devexit temac_of_remove(struct platform_device *op)
1099 struct net_device *ndev = dev_get_drvdata(&op->dev);
1100 struct temac_local *lp = netdev_priv(ndev);
1102 temac_mdio_teardown(lp);
1103 unregister_netdev(ndev);
1104 sysfs_remove_group(&lp->dev->kobj, &temac_attr_group);
1105 if (lp->phy_node)
1106 of_node_put(lp->phy_node);
1107 lp->phy_node = NULL;
1108 dev_set_drvdata(&op->dev, NULL);
1109 iounmap(lp->regs);
1110 if (lp->sdma_regs)
1111 iounmap(lp->sdma_regs);
1112 free_netdev(ndev);
1113 return 0;
1116 static struct of_device_id temac_of_match[] __devinitdata = {
1117 { .compatible = "xlnx,xps-ll-temac-1.01.b", },
1118 { .compatible = "xlnx,xps-ll-temac-2.00.a", },
1119 { .compatible = "xlnx,xps-ll-temac-2.02.a", },
1120 { .compatible = "xlnx,xps-ll-temac-2.03.a", },
1123 MODULE_DEVICE_TABLE(of, temac_of_match);
1125 static struct platform_driver temac_of_driver = {
1126 .probe = temac_of_probe,
1127 .remove = __devexit_p(temac_of_remove),
1128 .driver = {
1129 .owner = THIS_MODULE,
1130 .name = "xilinx_temac",
1131 .of_match_table = temac_of_match,
1135 static int __init temac_init(void)
1137 return platform_driver_register(&temac_of_driver);
1139 module_init(temac_init);
1141 static void __exit temac_exit(void)
1143 platform_driver_unregister(&temac_of_driver);
1145 module_exit(temac_exit);
1147 MODULE_DESCRIPTION("Xilinx LL_TEMAC Ethernet driver");
1148 MODULE_AUTHOR("Yoshio Kashiwagi");
1149 MODULE_LICENSE("GPL");