1 /******************************************************************************
2 * This software may be used and distributed according to the terms of
3 * the GNU General Public License (GPL), incorporated herein by reference.
4 * Drivers based on or derived from this code fall under the GPL and must
5 * retain the authorship, copyright and license notice. This file is not
6 * a complete program and may only be used when the entire operating
7 * system is licensed under the GPL.
8 * See the file COPYING in this distribution for more information.
10 * vxge-main.c: Driver for Exar Corp's X3100 Series 10GbE PCIe I/O
11 * Virtualized Server Adapter.
12 * Copyright(c) 2002-2010 Exar Corp.
14 * The module loadable parameters that are supported by the driver and a brief
15 * explanation of all the variables:
17 * Strip VLAN Tag enable/disable. Instructs the device to remove
18 * the VLAN tag from all received tagged frames that are not
19 * replicated at the internal L2 switch.
20 * 0 - Do not strip the VLAN tag.
21 * 1 - Strip the VLAN tag.
24 * Enable learning the mac address of the guest OS interface in
25 * a virtualization environment.
30 * Maximum number of port to be supported.
34 * This configures the maximum no of VPATH configures for each
36 * MIN - 1 and MAX - 17
39 * This configures maximum no of Device function to be enabled.
40 * MIN - 1 and MAX - 17
42 ******************************************************************************/
44 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
46 #include <linux/if_vlan.h>
47 #include <linux/pci.h>
48 #include <linux/slab.h>
49 #include <linux/tcp.h>
51 #include <linux/netdevice.h>
52 #include <linux/etherdevice.h>
53 #include <linux/firmware.h>
54 #include <linux/net_tstamp.h>
55 #include <linux/prefetch.h>
56 #include "vxge-main.h"
59 MODULE_LICENSE("Dual BSD/GPL");
60 MODULE_DESCRIPTION("Neterion's X3100 Series 10GbE PCIe I/O"
61 "Virtualized Server Adapter");
63 static DEFINE_PCI_DEVICE_TABLE(vxge_id_table
) = {
64 {PCI_VENDOR_ID_S2IO
, PCI_DEVICE_ID_TITAN_WIN
, PCI_ANY_ID
,
66 {PCI_VENDOR_ID_S2IO
, PCI_DEVICE_ID_TITAN_UNI
, PCI_ANY_ID
,
71 MODULE_DEVICE_TABLE(pci
, vxge_id_table
);
73 VXGE_MODULE_PARAM_INT(vlan_tag_strip
, VXGE_HW_VPATH_RPA_STRIP_VLAN_TAG_ENABLE
);
74 VXGE_MODULE_PARAM_INT(addr_learn_en
, VXGE_HW_MAC_ADDR_LEARN_DEFAULT
);
75 VXGE_MODULE_PARAM_INT(max_config_port
, VXGE_MAX_CONFIG_PORT
);
76 VXGE_MODULE_PARAM_INT(max_config_vpath
, VXGE_USE_DEFAULT
);
77 VXGE_MODULE_PARAM_INT(max_mac_vpath
, VXGE_MAX_MAC_ADDR_COUNT
);
78 VXGE_MODULE_PARAM_INT(max_config_dev
, VXGE_MAX_CONFIG_DEV
);
80 static u16 vpath_selector
[VXGE_HW_MAX_VIRTUAL_PATHS
] =
81 {0, 1, 3, 3, 7, 7, 7, 7, 15, 15, 15, 15, 15, 15, 15, 15, 31};
82 static unsigned int bw_percentage
[VXGE_HW_MAX_VIRTUAL_PATHS
] =
83 {[0 ...(VXGE_HW_MAX_VIRTUAL_PATHS
- 1)] = 0xFF};
84 module_param_array(bw_percentage
, uint
, NULL
, 0);
86 static struct vxge_drv_config
*driver_config
;
88 static inline int is_vxge_card_up(struct vxgedev
*vdev
)
90 return test_bit(__VXGE_STATE_CARD_UP
, &vdev
->state
);
93 static inline void VXGE_COMPLETE_VPATH_TX(struct vxge_fifo
*fifo
)
95 struct sk_buff
**skb_ptr
= NULL
;
96 struct sk_buff
**temp
;
97 #define NR_SKB_COMPLETED 128
98 struct sk_buff
*completed
[NR_SKB_COMPLETED
];
105 if (__netif_tx_trylock(fifo
->txq
)) {
106 vxge_hw_vpath_poll_tx(fifo
->handle
, &skb_ptr
,
107 NR_SKB_COMPLETED
, &more
);
108 __netif_tx_unlock(fifo
->txq
);
112 for (temp
= completed
; temp
!= skb_ptr
; temp
++)
113 dev_kfree_skb_irq(*temp
);
117 static inline void VXGE_COMPLETE_ALL_TX(struct vxgedev
*vdev
)
121 /* Complete all transmits */
122 for (i
= 0; i
< vdev
->no_of_vpath
; i
++)
123 VXGE_COMPLETE_VPATH_TX(&vdev
->vpaths
[i
].fifo
);
126 static inline void VXGE_COMPLETE_ALL_RX(struct vxgedev
*vdev
)
129 struct vxge_ring
*ring
;
131 /* Complete all receives*/
132 for (i
= 0; i
< vdev
->no_of_vpath
; i
++) {
133 ring
= &vdev
->vpaths
[i
].ring
;
134 vxge_hw_vpath_poll_rx(ring
->handle
);
139 * vxge_callback_link_up
141 * This function is called during interrupt context to notify link up state
144 static void vxge_callback_link_up(struct __vxge_hw_device
*hldev
)
146 struct net_device
*dev
= hldev
->ndev
;
147 struct vxgedev
*vdev
= netdev_priv(dev
);
149 vxge_debug_entryexit(VXGE_TRACE
, "%s: %s:%d",
150 vdev
->ndev
->name
, __func__
, __LINE__
);
151 netdev_notice(vdev
->ndev
, "Link Up\n");
152 vdev
->stats
.link_up
++;
154 netif_carrier_on(vdev
->ndev
);
155 netif_tx_wake_all_queues(vdev
->ndev
);
157 vxge_debug_entryexit(VXGE_TRACE
,
158 "%s: %s:%d Exiting...", vdev
->ndev
->name
, __func__
, __LINE__
);
162 * vxge_callback_link_down
164 * This function is called during interrupt context to notify link down state
167 static void vxge_callback_link_down(struct __vxge_hw_device
*hldev
)
169 struct net_device
*dev
= hldev
->ndev
;
170 struct vxgedev
*vdev
= netdev_priv(dev
);
172 vxge_debug_entryexit(VXGE_TRACE
,
173 "%s: %s:%d", vdev
->ndev
->name
, __func__
, __LINE__
);
174 netdev_notice(vdev
->ndev
, "Link Down\n");
176 vdev
->stats
.link_down
++;
177 netif_carrier_off(vdev
->ndev
);
178 netif_tx_stop_all_queues(vdev
->ndev
);
180 vxge_debug_entryexit(VXGE_TRACE
,
181 "%s: %s:%d Exiting...", vdev
->ndev
->name
, __func__
, __LINE__
);
189 static struct sk_buff
*
190 vxge_rx_alloc(void *dtrh
, struct vxge_ring
*ring
, const int skb_size
)
192 struct net_device
*dev
;
194 struct vxge_rx_priv
*rx_priv
;
197 vxge_debug_entryexit(VXGE_TRACE
, "%s: %s:%d",
198 ring
->ndev
->name
, __func__
, __LINE__
);
200 rx_priv
= vxge_hw_ring_rxd_private_get(dtrh
);
202 /* try to allocate skb first. this one may fail */
203 skb
= netdev_alloc_skb(dev
, skb_size
+
204 VXGE_HW_HEADER_ETHERNET_II_802_3_ALIGN
);
206 vxge_debug_mem(VXGE_ERR
,
207 "%s: out of memory to allocate SKB", dev
->name
);
208 ring
->stats
.skb_alloc_fail
++;
212 vxge_debug_mem(VXGE_TRACE
,
213 "%s: %s:%d Skb : 0x%p", ring
->ndev
->name
,
214 __func__
, __LINE__
, skb
);
216 skb_reserve(skb
, VXGE_HW_HEADER_ETHERNET_II_802_3_ALIGN
);
219 rx_priv
->skb_data
= NULL
;
220 rx_priv
->data_size
= skb_size
;
221 vxge_debug_entryexit(VXGE_TRACE
,
222 "%s: %s:%d Exiting...", ring
->ndev
->name
, __func__
, __LINE__
);
230 static int vxge_rx_map(void *dtrh
, struct vxge_ring
*ring
)
232 struct vxge_rx_priv
*rx_priv
;
235 vxge_debug_entryexit(VXGE_TRACE
, "%s: %s:%d",
236 ring
->ndev
->name
, __func__
, __LINE__
);
237 rx_priv
= vxge_hw_ring_rxd_private_get(dtrh
);
239 rx_priv
->skb_data
= rx_priv
->skb
->data
;
240 dma_addr
= pci_map_single(ring
->pdev
, rx_priv
->skb_data
,
241 rx_priv
->data_size
, PCI_DMA_FROMDEVICE
);
243 if (unlikely(pci_dma_mapping_error(ring
->pdev
, dma_addr
))) {
244 ring
->stats
.pci_map_fail
++;
247 vxge_debug_mem(VXGE_TRACE
,
248 "%s: %s:%d 1 buffer mode dma_addr = 0x%llx",
249 ring
->ndev
->name
, __func__
, __LINE__
,
250 (unsigned long long)dma_addr
);
251 vxge_hw_ring_rxd_1b_set(dtrh
, dma_addr
, rx_priv
->data_size
);
253 rx_priv
->data_dma
= dma_addr
;
254 vxge_debug_entryexit(VXGE_TRACE
,
255 "%s: %s:%d Exiting...", ring
->ndev
->name
, __func__
, __LINE__
);
261 * vxge_rx_initial_replenish
262 * Allocation of RxD as an initial replenish procedure.
264 static enum vxge_hw_status
265 vxge_rx_initial_replenish(void *dtrh
, void *userdata
)
267 struct vxge_ring
*ring
= (struct vxge_ring
*)userdata
;
268 struct vxge_rx_priv
*rx_priv
;
270 vxge_debug_entryexit(VXGE_TRACE
, "%s: %s:%d",
271 ring
->ndev
->name
, __func__
, __LINE__
);
272 if (vxge_rx_alloc(dtrh
, ring
,
273 VXGE_LL_MAX_FRAME_SIZE(ring
->ndev
)) == NULL
)
276 if (vxge_rx_map(dtrh
, ring
)) {
277 rx_priv
= vxge_hw_ring_rxd_private_get(dtrh
);
278 dev_kfree_skb(rx_priv
->skb
);
282 vxge_debug_entryexit(VXGE_TRACE
,
283 "%s: %s:%d Exiting...", ring
->ndev
->name
, __func__
, __LINE__
);
289 vxge_rx_complete(struct vxge_ring
*ring
, struct sk_buff
*skb
, u16 vlan
,
290 int pkt_length
, struct vxge_hw_ring_rxd_info
*ext_info
)
293 vxge_debug_entryexit(VXGE_TRACE
, "%s: %s:%d",
294 ring
->ndev
->name
, __func__
, __LINE__
);
295 skb_record_rx_queue(skb
, ring
->driver_id
);
296 skb
->protocol
= eth_type_trans(skb
, ring
->ndev
);
298 ring
->stats
.rx_frms
++;
299 ring
->stats
.rx_bytes
+= pkt_length
;
301 if (skb
->pkt_type
== PACKET_MULTICAST
)
302 ring
->stats
.rx_mcast
++;
304 vxge_debug_rx(VXGE_TRACE
,
305 "%s: %s:%d skb protocol = %d",
306 ring
->ndev
->name
, __func__
, __LINE__
, skb
->protocol
);
308 if (ring
->vlgrp
&& ext_info
->vlan
&&
309 (ring
->vlan_tag_strip
==
310 VXGE_HW_VPATH_RPA_STRIP_VLAN_TAG_ENABLE
))
311 vlan_gro_receive(ring
->napi_p
, ring
->vlgrp
,
312 ext_info
->vlan
, skb
);
314 napi_gro_receive(ring
->napi_p
, skb
);
316 vxge_debug_entryexit(VXGE_TRACE
,
317 "%s: %s:%d Exiting...", ring
->ndev
->name
, __func__
, __LINE__
);
320 static inline void vxge_re_pre_post(void *dtr
, struct vxge_ring
*ring
,
321 struct vxge_rx_priv
*rx_priv
)
323 pci_dma_sync_single_for_device(ring
->pdev
,
324 rx_priv
->data_dma
, rx_priv
->data_size
, PCI_DMA_FROMDEVICE
);
326 vxge_hw_ring_rxd_1b_set(dtr
, rx_priv
->data_dma
, rx_priv
->data_size
);
327 vxge_hw_ring_rxd_pre_post(ring
->handle
, dtr
);
330 static inline void vxge_post(int *dtr_cnt
, void **first_dtr
,
331 void *post_dtr
, struct __vxge_hw_ring
*ringh
)
333 int dtr_count
= *dtr_cnt
;
334 if ((*dtr_cnt
% VXGE_HW_RXSYNC_FREQ_CNT
) == 0) {
336 vxge_hw_ring_rxd_post_post_wmb(ringh
, *first_dtr
);
337 *first_dtr
= post_dtr
;
339 vxge_hw_ring_rxd_post_post(ringh
, post_dtr
);
341 *dtr_cnt
= dtr_count
;
347 * If the interrupt is because of a received frame or if the receive ring
348 * contains fresh as yet un-processed frames, this function is called.
350 static enum vxge_hw_status
351 vxge_rx_1b_compl(struct __vxge_hw_ring
*ringh
, void *dtr
,
352 u8 t_code
, void *userdata
)
354 struct vxge_ring
*ring
= (struct vxge_ring
*)userdata
;
355 struct net_device
*dev
= ring
->ndev
;
356 unsigned int dma_sizes
;
357 void *first_dtr
= NULL
;
363 struct vxge_rx_priv
*rx_priv
;
364 struct vxge_hw_ring_rxd_info ext_info
;
365 vxge_debug_entryexit(VXGE_TRACE
, "%s: %s:%d",
366 ring
->ndev
->name
, __func__
, __LINE__
);
369 prefetch((char *)dtr
+ L1_CACHE_BYTES
);
370 rx_priv
= vxge_hw_ring_rxd_private_get(dtr
);
372 data_size
= rx_priv
->data_size
;
373 data_dma
= rx_priv
->data_dma
;
374 prefetch(rx_priv
->skb_data
);
376 vxge_debug_rx(VXGE_TRACE
,
377 "%s: %s:%d skb = 0x%p",
378 ring
->ndev
->name
, __func__
, __LINE__
, skb
);
380 vxge_hw_ring_rxd_1b_get(ringh
, dtr
, &dma_sizes
);
381 pkt_length
= dma_sizes
;
383 pkt_length
-= ETH_FCS_LEN
;
385 vxge_debug_rx(VXGE_TRACE
,
386 "%s: %s:%d Packet Length = %d",
387 ring
->ndev
->name
, __func__
, __LINE__
, pkt_length
);
389 vxge_hw_ring_rxd_1b_info_get(ringh
, dtr
, &ext_info
);
391 /* check skb validity */
394 prefetch((char *)skb
+ L1_CACHE_BYTES
);
395 if (unlikely(t_code
)) {
396 if (vxge_hw_ring_handle_tcode(ringh
, dtr
, t_code
) !=
399 ring
->stats
.rx_errors
++;
400 vxge_debug_rx(VXGE_TRACE
,
401 "%s: %s :%d Rx T_code is %d",
402 ring
->ndev
->name
, __func__
,
405 /* If the t_code is not supported and if the
406 * t_code is other than 0x5 (unparseable packet
407 * such as unknown UPV6 header), Drop it !!!
409 vxge_re_pre_post(dtr
, ring
, rx_priv
);
411 vxge_post(&dtr_cnt
, &first_dtr
, dtr
, ringh
);
412 ring
->stats
.rx_dropped
++;
417 if (pkt_length
> VXGE_LL_RX_COPY_THRESHOLD
) {
418 if (vxge_rx_alloc(dtr
, ring
, data_size
) != NULL
) {
419 if (!vxge_rx_map(dtr
, ring
)) {
420 skb_put(skb
, pkt_length
);
422 pci_unmap_single(ring
->pdev
, data_dma
,
423 data_size
, PCI_DMA_FROMDEVICE
);
425 vxge_hw_ring_rxd_pre_post(ringh
, dtr
);
426 vxge_post(&dtr_cnt
, &first_dtr
, dtr
,
429 dev_kfree_skb(rx_priv
->skb
);
431 rx_priv
->data_size
= data_size
;
432 vxge_re_pre_post(dtr
, ring
, rx_priv
);
434 vxge_post(&dtr_cnt
, &first_dtr
, dtr
,
436 ring
->stats
.rx_dropped
++;
440 vxge_re_pre_post(dtr
, ring
, rx_priv
);
442 vxge_post(&dtr_cnt
, &first_dtr
, dtr
, ringh
);
443 ring
->stats
.rx_dropped
++;
447 struct sk_buff
*skb_up
;
449 skb_up
= netdev_alloc_skb(dev
, pkt_length
+
450 VXGE_HW_HEADER_ETHERNET_II_802_3_ALIGN
);
451 if (skb_up
!= NULL
) {
453 VXGE_HW_HEADER_ETHERNET_II_802_3_ALIGN
);
455 pci_dma_sync_single_for_cpu(ring
->pdev
,
459 vxge_debug_mem(VXGE_TRACE
,
460 "%s: %s:%d skb_up = %p",
461 ring
->ndev
->name
, __func__
,
463 memcpy(skb_up
->data
, skb
->data
, pkt_length
);
465 vxge_re_pre_post(dtr
, ring
, rx_priv
);
467 vxge_post(&dtr_cnt
, &first_dtr
, dtr
,
469 /* will netif_rx small SKB instead */
471 skb_put(skb
, pkt_length
);
473 vxge_re_pre_post(dtr
, ring
, rx_priv
);
475 vxge_post(&dtr_cnt
, &first_dtr
, dtr
, ringh
);
476 vxge_debug_rx(VXGE_ERR
,
477 "%s: vxge_rx_1b_compl: out of "
478 "memory", dev
->name
);
479 ring
->stats
.skb_alloc_fail
++;
484 if ((ext_info
.proto
& VXGE_HW_FRAME_PROTO_TCP_OR_UDP
) &&
485 !(ext_info
.proto
& VXGE_HW_FRAME_PROTO_IP_FRAG
) &&
486 (dev
->features
& NETIF_F_RXCSUM
) && /* Offload Rx side CSUM */
487 ext_info
.l3_cksum
== VXGE_HW_L3_CKSUM_OK
&&
488 ext_info
.l4_cksum
== VXGE_HW_L4_CKSUM_OK
)
489 skb
->ip_summed
= CHECKSUM_UNNECESSARY
;
491 skb_checksum_none_assert(skb
);
495 struct skb_shared_hwtstamps
*skb_hwts
;
496 u32 ns
= *(u32
*)(skb
->head
+ pkt_length
);
498 skb_hwts
= skb_hwtstamps(skb
);
499 skb_hwts
->hwtstamp
= ns_to_ktime(ns
);
500 skb_hwts
->syststamp
.tv64
= 0;
503 /* rth_hash_type and rth_it_hit are non-zero regardless of
504 * whether rss is enabled. Only the rth_value is zero/non-zero
505 * if rss is disabled/enabled, so key off of that.
507 if (ext_info
.rth_value
)
508 skb
->rxhash
= ext_info
.rth_value
;
510 vxge_rx_complete(ring
, skb
, ext_info
.vlan
,
511 pkt_length
, &ext_info
);
514 ring
->pkts_processed
++;
518 } while (vxge_hw_ring_rxd_next_completed(ringh
, &dtr
,
519 &t_code
) == VXGE_HW_OK
);
522 vxge_hw_ring_rxd_post_post_wmb(ringh
, first_dtr
);
524 vxge_debug_entryexit(VXGE_TRACE
,
533 * If an interrupt was raised to indicate DMA complete of the Tx packet,
534 * this function is called. It identifies the last TxD whose buffer was
535 * freed and frees all skbs whose data have already DMA'ed into the NICs
538 static enum vxge_hw_status
539 vxge_xmit_compl(struct __vxge_hw_fifo
*fifo_hw
, void *dtr
,
540 enum vxge_hw_fifo_tcode t_code
, void *userdata
,
541 struct sk_buff
***skb_ptr
, int nr_skb
, int *more
)
543 struct vxge_fifo
*fifo
= (struct vxge_fifo
*)userdata
;
544 struct sk_buff
*skb
, **done_skb
= *skb_ptr
;
547 vxge_debug_entryexit(VXGE_TRACE
,
548 "%s:%d Entered....", __func__
, __LINE__
);
554 struct vxge_tx_priv
*txd_priv
=
555 vxge_hw_fifo_txdl_private_get(dtr
);
558 frg_cnt
= skb_shinfo(skb
)->nr_frags
;
559 frag
= &skb_shinfo(skb
)->frags
[0];
561 vxge_debug_tx(VXGE_TRACE
,
562 "%s: %s:%d fifo_hw = %p dtr = %p "
563 "tcode = 0x%x", fifo
->ndev
->name
, __func__
,
564 __LINE__
, fifo_hw
, dtr
, t_code
);
565 /* check skb validity */
567 vxge_debug_tx(VXGE_TRACE
,
568 "%s: %s:%d skb = %p itxd_priv = %p frg_cnt = %d",
569 fifo
->ndev
->name
, __func__
, __LINE__
,
570 skb
, txd_priv
, frg_cnt
);
571 if (unlikely(t_code
)) {
572 fifo
->stats
.tx_errors
++;
573 vxge_debug_tx(VXGE_ERR
,
574 "%s: tx: dtr %p completed due to "
575 "error t_code %01x", fifo
->ndev
->name
,
577 vxge_hw_fifo_handle_tcode(fifo_hw
, dtr
, t_code
);
580 /* for unfragmented skb */
581 pci_unmap_single(fifo
->pdev
, txd_priv
->dma_buffers
[i
++],
582 skb_headlen(skb
), PCI_DMA_TODEVICE
);
584 for (j
= 0; j
< frg_cnt
; j
++) {
585 pci_unmap_page(fifo
->pdev
,
586 txd_priv
->dma_buffers
[i
++],
587 frag
->size
, PCI_DMA_TODEVICE
);
591 vxge_hw_fifo_txdl_free(fifo_hw
, dtr
);
593 /* Updating the statistics block */
594 fifo
->stats
.tx_frms
++;
595 fifo
->stats
.tx_bytes
+= skb
->len
;
605 if (pkt_cnt
> fifo
->indicate_max_pkts
)
608 } while (vxge_hw_fifo_txdl_next_completed(fifo_hw
,
609 &dtr
, &t_code
) == VXGE_HW_OK
);
612 if (netif_tx_queue_stopped(fifo
->txq
))
613 netif_tx_wake_queue(fifo
->txq
);
615 vxge_debug_entryexit(VXGE_TRACE
,
616 "%s: %s:%d Exiting...",
617 fifo
->ndev
->name
, __func__
, __LINE__
);
621 /* select a vpath to transmit the packet */
622 static u32
vxge_get_vpath_no(struct vxgedev
*vdev
, struct sk_buff
*skb
)
624 u16 queue_len
, counter
= 0;
625 if (skb
->protocol
== htons(ETH_P_IP
)) {
631 if ((ip
->frag_off
& htons(IP_OFFSET
|IP_MF
)) == 0) {
632 th
= (struct tcphdr
*)(((unsigned char *)ip
) +
635 queue_len
= vdev
->no_of_vpath
;
636 counter
= (ntohs(th
->source
) +
638 vdev
->vpath_selector
[queue_len
- 1];
639 if (counter
>= queue_len
)
640 counter
= queue_len
- 1;
646 static enum vxge_hw_status
vxge_search_mac_addr_in_list(
647 struct vxge_vpath
*vpath
, u64 del_mac
)
649 struct list_head
*entry
, *next
;
650 list_for_each_safe(entry
, next
, &vpath
->mac_addr_list
) {
651 if (((struct vxge_mac_addrs
*)entry
)->macaddr
== del_mac
)
657 static int vxge_mac_list_add(struct vxge_vpath
*vpath
, struct macInfo
*mac
)
659 struct vxge_mac_addrs
*new_mac_entry
;
660 u8
*mac_address
= NULL
;
662 if (vpath
->mac_addr_cnt
>= VXGE_MAX_LEARN_MAC_ADDR_CNT
)
665 new_mac_entry
= kzalloc(sizeof(struct vxge_mac_addrs
), GFP_ATOMIC
);
666 if (!new_mac_entry
) {
667 vxge_debug_mem(VXGE_ERR
,
668 "%s: memory allocation failed",
673 list_add(&new_mac_entry
->item
, &vpath
->mac_addr_list
);
675 /* Copy the new mac address to the list */
676 mac_address
= (u8
*)&new_mac_entry
->macaddr
;
677 memcpy(mac_address
, mac
->macaddr
, ETH_ALEN
);
679 new_mac_entry
->state
= mac
->state
;
680 vpath
->mac_addr_cnt
++;
682 /* Is this a multicast address */
683 if (0x01 & mac
->macaddr
[0])
684 vpath
->mcast_addr_cnt
++;
689 /* Add a mac address to DA table */
690 static enum vxge_hw_status
691 vxge_add_mac_addr(struct vxgedev
*vdev
, struct macInfo
*mac
)
693 enum vxge_hw_status status
= VXGE_HW_OK
;
694 struct vxge_vpath
*vpath
;
695 enum vxge_hw_vpath_mac_addr_add_mode duplicate_mode
;
697 if (0x01 & mac
->macaddr
[0]) /* multicast address */
698 duplicate_mode
= VXGE_HW_VPATH_MAC_ADDR_ADD_DUPLICATE
;
700 duplicate_mode
= VXGE_HW_VPATH_MAC_ADDR_REPLACE_DUPLICATE
;
702 vpath
= &vdev
->vpaths
[mac
->vpath_no
];
703 status
= vxge_hw_vpath_mac_addr_add(vpath
->handle
, mac
->macaddr
,
704 mac
->macmask
, duplicate_mode
);
705 if (status
!= VXGE_HW_OK
) {
706 vxge_debug_init(VXGE_ERR
,
707 "DA config add entry failed for vpath:%d",
710 if (FALSE
== vxge_mac_list_add(vpath
, mac
))
716 static int vxge_learn_mac(struct vxgedev
*vdev
, u8
*mac_header
)
718 struct macInfo mac_info
;
719 u8
*mac_address
= NULL
;
720 u64 mac_addr
= 0, vpath_vector
= 0;
722 enum vxge_hw_status status
= VXGE_HW_OK
;
723 struct vxge_vpath
*vpath
= NULL
;
724 struct __vxge_hw_device
*hldev
;
726 hldev
= pci_get_drvdata(vdev
->pdev
);
728 mac_address
= (u8
*)&mac_addr
;
729 memcpy(mac_address
, mac_header
, ETH_ALEN
);
731 /* Is this mac address already in the list? */
732 for (vpath_idx
= 0; vpath_idx
< vdev
->no_of_vpath
; vpath_idx
++) {
733 vpath
= &vdev
->vpaths
[vpath_idx
];
734 if (vxge_search_mac_addr_in_list(vpath
, mac_addr
))
738 memset(&mac_info
, 0, sizeof(struct macInfo
));
739 memcpy(mac_info
.macaddr
, mac_header
, ETH_ALEN
);
741 /* Any vpath has room to add mac address to its da table? */
742 for (vpath_idx
= 0; vpath_idx
< vdev
->no_of_vpath
; vpath_idx
++) {
743 vpath
= &vdev
->vpaths
[vpath_idx
];
744 if (vpath
->mac_addr_cnt
< vpath
->max_mac_addr_cnt
) {
745 /* Add this mac address to this vpath */
746 mac_info
.vpath_no
= vpath_idx
;
747 mac_info
.state
= VXGE_LL_MAC_ADDR_IN_DA_TABLE
;
748 status
= vxge_add_mac_addr(vdev
, &mac_info
);
749 if (status
!= VXGE_HW_OK
)
755 mac_info
.state
= VXGE_LL_MAC_ADDR_IN_LIST
;
757 mac_info
.vpath_no
= vpath_idx
;
758 /* Is the first vpath already selected as catch-basin ? */
759 vpath
= &vdev
->vpaths
[vpath_idx
];
760 if (vpath
->mac_addr_cnt
> vpath
->max_mac_addr_cnt
) {
761 /* Add this mac address to this vpath */
762 if (FALSE
== vxge_mac_list_add(vpath
, &mac_info
))
767 /* Select first vpath as catch-basin */
768 vpath_vector
= vxge_mBIT(vpath
->device_id
);
769 status
= vxge_hw_mgmt_reg_write(vpath
->vdev
->devh
,
770 vxge_hw_mgmt_reg_type_mrpcim
,
773 struct vxge_hw_mrpcim_reg
,
776 if (status
!= VXGE_HW_OK
) {
777 vxge_debug_tx(VXGE_ERR
,
778 "%s: Unable to set the vpath-%d in catch-basin mode",
779 VXGE_DRIVER_NAME
, vpath
->device_id
);
783 if (FALSE
== vxge_mac_list_add(vpath
, &mac_info
))
791 * @skb : the socket buffer containing the Tx data.
792 * @dev : device pointer.
794 * This function is the Tx entry point of the driver. Neterion NIC supports
795 * certain protocol assist features on Tx side, namely CSO, S/G, LSO.
798 vxge_xmit(struct sk_buff
*skb
, struct net_device
*dev
)
800 struct vxge_fifo
*fifo
= NULL
;
803 struct vxgedev
*vdev
= NULL
;
804 enum vxge_hw_status status
;
805 int frg_cnt
, first_frg_len
;
807 int i
= 0, j
= 0, avail
;
809 struct vxge_tx_priv
*txdl_priv
= NULL
;
810 struct __vxge_hw_fifo
*fifo_hw
;
814 vxge_debug_entryexit(VXGE_TRACE
, "%s: %s:%d",
815 dev
->name
, __func__
, __LINE__
);
817 /* A buffer with no data will be dropped */
818 if (unlikely(skb
->len
<= 0)) {
819 vxge_debug_tx(VXGE_ERR
,
820 "%s: Buffer has no data..", dev
->name
);
825 vdev
= netdev_priv(dev
);
827 if (unlikely(!is_vxge_card_up(vdev
))) {
828 vxge_debug_tx(VXGE_ERR
,
829 "%s: vdev not initialized", dev
->name
);
834 if (vdev
->config
.addr_learn_en
) {
835 vpath_no
= vxge_learn_mac(vdev
, skb
->data
+ ETH_ALEN
);
836 if (vpath_no
== -EPERM
) {
837 vxge_debug_tx(VXGE_ERR
,
838 "%s: Failed to store the mac address",
845 if (vdev
->config
.tx_steering_type
== TX_MULTIQ_STEERING
)
846 vpath_no
= skb_get_queue_mapping(skb
);
847 else if (vdev
->config
.tx_steering_type
== TX_PORT_STEERING
)
848 vpath_no
= vxge_get_vpath_no(vdev
, skb
);
850 vxge_debug_tx(VXGE_TRACE
, "%s: vpath_no= %d", dev
->name
, vpath_no
);
852 if (vpath_no
>= vdev
->no_of_vpath
)
855 fifo
= &vdev
->vpaths
[vpath_no
].fifo
;
856 fifo_hw
= fifo
->handle
;
858 if (netif_tx_queue_stopped(fifo
->txq
))
859 return NETDEV_TX_BUSY
;
861 avail
= vxge_hw_fifo_free_txdl_count_get(fifo_hw
);
863 vxge_debug_tx(VXGE_ERR
,
864 "%s: No free TXDs available", dev
->name
);
865 fifo
->stats
.txd_not_free
++;
869 /* Last TXD? Stop tx queue to avoid dropping packets. TX
870 * completion will resume the queue.
873 netif_tx_stop_queue(fifo
->txq
);
875 status
= vxge_hw_fifo_txdl_reserve(fifo_hw
, &dtr
, &dtr_priv
);
876 if (unlikely(status
!= VXGE_HW_OK
)) {
877 vxge_debug_tx(VXGE_ERR
,
878 "%s: Out of descriptors .", dev
->name
);
879 fifo
->stats
.txd_out_of_desc
++;
883 vxge_debug_tx(VXGE_TRACE
,
884 "%s: %s:%d fifo_hw = %p dtr = %p dtr_priv = %p",
885 dev
->name
, __func__
, __LINE__
,
886 fifo_hw
, dtr
, dtr_priv
);
888 if (vlan_tx_tag_present(skb
)) {
889 u16 vlan_tag
= vlan_tx_tag_get(skb
);
890 vxge_hw_fifo_txdl_vlan_set(dtr
, vlan_tag
);
893 first_frg_len
= skb_headlen(skb
);
895 dma_pointer
= pci_map_single(fifo
->pdev
, skb
->data
, first_frg_len
,
898 if (unlikely(pci_dma_mapping_error(fifo
->pdev
, dma_pointer
))) {
899 vxge_hw_fifo_txdl_free(fifo_hw
, dtr
);
900 fifo
->stats
.pci_map_fail
++;
904 txdl_priv
= vxge_hw_fifo_txdl_private_get(dtr
);
905 txdl_priv
->skb
= skb
;
906 txdl_priv
->dma_buffers
[j
] = dma_pointer
;
908 frg_cnt
= skb_shinfo(skb
)->nr_frags
;
909 vxge_debug_tx(VXGE_TRACE
,
910 "%s: %s:%d skb = %p txdl_priv = %p "
911 "frag_cnt = %d dma_pointer = 0x%llx", dev
->name
,
912 __func__
, __LINE__
, skb
, txdl_priv
,
913 frg_cnt
, (unsigned long long)dma_pointer
);
915 vxge_hw_fifo_txdl_buffer_set(fifo_hw
, dtr
, j
++, dma_pointer
,
918 frag
= &skb_shinfo(skb
)->frags
[0];
919 for (i
= 0; i
< frg_cnt
; i
++) {
920 /* ignore 0 length fragment */
924 dma_pointer
= (u64
) pci_map_page(fifo
->pdev
, frag
->page
,
925 frag
->page_offset
, frag
->size
,
928 if (unlikely(pci_dma_mapping_error(fifo
->pdev
, dma_pointer
)))
930 vxge_debug_tx(VXGE_TRACE
,
931 "%s: %s:%d frag = %d dma_pointer = 0x%llx",
932 dev
->name
, __func__
, __LINE__
, i
,
933 (unsigned long long)dma_pointer
);
935 txdl_priv
->dma_buffers
[j
] = dma_pointer
;
936 vxge_hw_fifo_txdl_buffer_set(fifo_hw
, dtr
, j
++, dma_pointer
,
941 offload_type
= vxge_offload_type(skb
);
943 if (offload_type
& (SKB_GSO_TCPV4
| SKB_GSO_TCPV6
)) {
944 int mss
= vxge_tcp_mss(skb
);
946 vxge_debug_tx(VXGE_TRACE
, "%s: %s:%d mss = %d",
947 dev
->name
, __func__
, __LINE__
, mss
);
948 vxge_hw_fifo_txdl_mss_set(dtr
, mss
);
950 vxge_assert(skb
->len
<=
951 dev
->mtu
+ VXGE_HW_MAC_HEADER_MAX_SIZE
);
957 if (skb
->ip_summed
== CHECKSUM_PARTIAL
)
958 vxge_hw_fifo_txdl_cksum_set_bits(dtr
,
959 VXGE_HW_FIFO_TXD_TX_CKO_IPV4_EN
|
960 VXGE_HW_FIFO_TXD_TX_CKO_TCP_EN
|
961 VXGE_HW_FIFO_TXD_TX_CKO_UDP_EN
);
963 vxge_hw_fifo_txdl_post(fifo_hw
, dtr
);
965 vxge_debug_entryexit(VXGE_TRACE
, "%s: %s:%d Exiting...",
966 dev
->name
, __func__
, __LINE__
);
970 vxge_debug_tx(VXGE_TRACE
, "%s: pci_map_page failed", dev
->name
);
973 frag
= &skb_shinfo(skb
)->frags
[0];
975 pci_unmap_single(fifo
->pdev
, txdl_priv
->dma_buffers
[j
++],
976 skb_headlen(skb
), PCI_DMA_TODEVICE
);
979 pci_unmap_page(fifo
->pdev
, txdl_priv
->dma_buffers
[j
],
980 frag
->size
, PCI_DMA_TODEVICE
);
984 vxge_hw_fifo_txdl_free(fifo_hw
, dtr
);
986 netif_tx_stop_queue(fifo
->txq
);
995 * Function will be called by hw function to abort all outstanding receive
999 vxge_rx_term(void *dtrh
, enum vxge_hw_rxd_state state
, void *userdata
)
1001 struct vxge_ring
*ring
= (struct vxge_ring
*)userdata
;
1002 struct vxge_rx_priv
*rx_priv
=
1003 vxge_hw_ring_rxd_private_get(dtrh
);
1005 vxge_debug_entryexit(VXGE_TRACE
, "%s: %s:%d",
1006 ring
->ndev
->name
, __func__
, __LINE__
);
1007 if (state
!= VXGE_HW_RXD_STATE_POSTED
)
1010 pci_unmap_single(ring
->pdev
, rx_priv
->data_dma
,
1011 rx_priv
->data_size
, PCI_DMA_FROMDEVICE
);
1013 dev_kfree_skb(rx_priv
->skb
);
1014 rx_priv
->skb_data
= NULL
;
1016 vxge_debug_entryexit(VXGE_TRACE
,
1017 "%s: %s:%d Exiting...",
1018 ring
->ndev
->name
, __func__
, __LINE__
);
1024 * Function will be called to abort all outstanding tx descriptors
1027 vxge_tx_term(void *dtrh
, enum vxge_hw_txdl_state state
, void *userdata
)
1029 struct vxge_fifo
*fifo
= (struct vxge_fifo
*)userdata
;
1031 int i
= 0, j
, frg_cnt
;
1032 struct vxge_tx_priv
*txd_priv
= vxge_hw_fifo_txdl_private_get(dtrh
);
1033 struct sk_buff
*skb
= txd_priv
->skb
;
1035 vxge_debug_entryexit(VXGE_TRACE
, "%s:%d", __func__
, __LINE__
);
1037 if (state
!= VXGE_HW_TXDL_STATE_POSTED
)
1040 /* check skb validity */
1042 frg_cnt
= skb_shinfo(skb
)->nr_frags
;
1043 frag
= &skb_shinfo(skb
)->frags
[0];
1045 /* for unfragmented skb */
1046 pci_unmap_single(fifo
->pdev
, txd_priv
->dma_buffers
[i
++],
1047 skb_headlen(skb
), PCI_DMA_TODEVICE
);
1049 for (j
= 0; j
< frg_cnt
; j
++) {
1050 pci_unmap_page(fifo
->pdev
, txd_priv
->dma_buffers
[i
++],
1051 frag
->size
, PCI_DMA_TODEVICE
);
1057 vxge_debug_entryexit(VXGE_TRACE
,
1058 "%s:%d Exiting...", __func__
, __LINE__
);
1061 static int vxge_mac_list_del(struct vxge_vpath
*vpath
, struct macInfo
*mac
)
1063 struct list_head
*entry
, *next
;
1065 u8
*mac_address
= (u8
*) (&del_mac
);
1067 /* Copy the mac address to delete from the list */
1068 memcpy(mac_address
, mac
->macaddr
, ETH_ALEN
);
1070 list_for_each_safe(entry
, next
, &vpath
->mac_addr_list
) {
1071 if (((struct vxge_mac_addrs
*)entry
)->macaddr
== del_mac
) {
1073 kfree((struct vxge_mac_addrs
*)entry
);
1074 vpath
->mac_addr_cnt
--;
1076 /* Is this a multicast address */
1077 if (0x01 & mac
->macaddr
[0])
1078 vpath
->mcast_addr_cnt
--;
1086 /* delete a mac address from DA table */
1087 static enum vxge_hw_status
1088 vxge_del_mac_addr(struct vxgedev
*vdev
, struct macInfo
*mac
)
1090 enum vxge_hw_status status
= VXGE_HW_OK
;
1091 struct vxge_vpath
*vpath
;
1093 vpath
= &vdev
->vpaths
[mac
->vpath_no
];
1094 status
= vxge_hw_vpath_mac_addr_delete(vpath
->handle
, mac
->macaddr
,
1096 if (status
!= VXGE_HW_OK
) {
1097 vxge_debug_init(VXGE_ERR
,
1098 "DA config delete entry failed for vpath:%d",
1101 vxge_mac_list_del(vpath
, mac
);
1106 * vxge_set_multicast
1107 * @dev: pointer to the device structure
1109 * Entry point for multicast address enable/disable
1110 * This function is a driver entry point which gets called by the kernel
1111 * whenever multicast addresses must be enabled/disabled. This also gets
1112 * called to set/reset promiscuous mode. Depending on the deivce flag, we
1113 * determine, if multicast address must be enabled or if promiscuous mode
1114 * is to be disabled etc.
1116 static void vxge_set_multicast(struct net_device
*dev
)
1118 struct netdev_hw_addr
*ha
;
1119 struct vxgedev
*vdev
;
1120 int i
, mcast_cnt
= 0;
1121 struct __vxge_hw_device
*hldev
;
1122 struct vxge_vpath
*vpath
;
1123 enum vxge_hw_status status
= VXGE_HW_OK
;
1124 struct macInfo mac_info
;
1126 struct vxge_mac_addrs
*mac_entry
;
1127 struct list_head
*list_head
;
1128 struct list_head
*entry
, *next
;
1129 u8
*mac_address
= NULL
;
1131 vxge_debug_entryexit(VXGE_TRACE
,
1132 "%s:%d", __func__
, __LINE__
);
1134 vdev
= netdev_priv(dev
);
1135 hldev
= (struct __vxge_hw_device
*)vdev
->devh
;
1137 if (unlikely(!is_vxge_card_up(vdev
)))
1140 if ((dev
->flags
& IFF_ALLMULTI
) && (!vdev
->all_multi_flg
)) {
1141 for (i
= 0; i
< vdev
->no_of_vpath
; i
++) {
1142 vpath
= &vdev
->vpaths
[i
];
1143 vxge_assert(vpath
->is_open
);
1144 status
= vxge_hw_vpath_mcast_enable(vpath
->handle
);
1145 if (status
!= VXGE_HW_OK
)
1146 vxge_debug_init(VXGE_ERR
, "failed to enable "
1147 "multicast, status %d", status
);
1148 vdev
->all_multi_flg
= 1;
1150 } else if (!(dev
->flags
& IFF_ALLMULTI
) && (vdev
->all_multi_flg
)) {
1151 for (i
= 0; i
< vdev
->no_of_vpath
; i
++) {
1152 vpath
= &vdev
->vpaths
[i
];
1153 vxge_assert(vpath
->is_open
);
1154 status
= vxge_hw_vpath_mcast_disable(vpath
->handle
);
1155 if (status
!= VXGE_HW_OK
)
1156 vxge_debug_init(VXGE_ERR
, "failed to disable "
1157 "multicast, status %d", status
);
1158 vdev
->all_multi_flg
= 0;
1163 if (!vdev
->config
.addr_learn_en
) {
1164 for (i
= 0; i
< vdev
->no_of_vpath
; i
++) {
1165 vpath
= &vdev
->vpaths
[i
];
1166 vxge_assert(vpath
->is_open
);
1168 if (dev
->flags
& IFF_PROMISC
)
1169 status
= vxge_hw_vpath_promisc_enable(
1172 status
= vxge_hw_vpath_promisc_disable(
1174 if (status
!= VXGE_HW_OK
)
1175 vxge_debug_init(VXGE_ERR
, "failed to %s promisc"
1176 ", status %d", dev
->flags
&IFF_PROMISC
?
1177 "enable" : "disable", status
);
1181 memset(&mac_info
, 0, sizeof(struct macInfo
));
1182 /* Update individual M_CAST address list */
1183 if ((!vdev
->all_multi_flg
) && netdev_mc_count(dev
)) {
1184 mcast_cnt
= vdev
->vpaths
[0].mcast_addr_cnt
;
1185 list_head
= &vdev
->vpaths
[0].mac_addr_list
;
1186 if ((netdev_mc_count(dev
) +
1187 (vdev
->vpaths
[0].mac_addr_cnt
- mcast_cnt
)) >
1188 vdev
->vpaths
[0].max_mac_addr_cnt
)
1189 goto _set_all_mcast
;
1191 /* Delete previous MC's */
1192 for (i
= 0; i
< mcast_cnt
; i
++) {
1193 list_for_each_safe(entry
, next
, list_head
) {
1194 mac_entry
= (struct vxge_mac_addrs
*)entry
;
1195 /* Copy the mac address to delete */
1196 mac_address
= (u8
*)&mac_entry
->macaddr
;
1197 memcpy(mac_info
.macaddr
, mac_address
, ETH_ALEN
);
1199 /* Is this a multicast address */
1200 if (0x01 & mac_info
.macaddr
[0]) {
1201 for (vpath_idx
= 0; vpath_idx
<
1204 mac_info
.vpath_no
= vpath_idx
;
1205 status
= vxge_del_mac_addr(
1214 netdev_for_each_mc_addr(ha
, dev
) {
1215 memcpy(mac_info
.macaddr
, ha
->addr
, ETH_ALEN
);
1216 for (vpath_idx
= 0; vpath_idx
< vdev
->no_of_vpath
;
1218 mac_info
.vpath_no
= vpath_idx
;
1219 mac_info
.state
= VXGE_LL_MAC_ADDR_IN_DA_TABLE
;
1220 status
= vxge_add_mac_addr(vdev
, &mac_info
);
1221 if (status
!= VXGE_HW_OK
) {
1222 vxge_debug_init(VXGE_ERR
,
1223 "%s:%d Setting individual"
1224 "multicast address failed",
1225 __func__
, __LINE__
);
1226 goto _set_all_mcast
;
1233 mcast_cnt
= vdev
->vpaths
[0].mcast_addr_cnt
;
1234 /* Delete previous MC's */
1235 for (i
= 0; i
< mcast_cnt
; i
++) {
1236 list_for_each_safe(entry
, next
, list_head
) {
1237 mac_entry
= (struct vxge_mac_addrs
*)entry
;
1238 /* Copy the mac address to delete */
1239 mac_address
= (u8
*)&mac_entry
->macaddr
;
1240 memcpy(mac_info
.macaddr
, mac_address
, ETH_ALEN
);
1242 /* Is this a multicast address */
1243 if (0x01 & mac_info
.macaddr
[0])
1247 for (vpath_idx
= 0; vpath_idx
< vdev
->no_of_vpath
;
1249 mac_info
.vpath_no
= vpath_idx
;
1250 status
= vxge_del_mac_addr(vdev
, &mac_info
);
1254 /* Enable all multicast */
1255 for (i
= 0; i
< vdev
->no_of_vpath
; i
++) {
1256 vpath
= &vdev
->vpaths
[i
];
1257 vxge_assert(vpath
->is_open
);
1259 status
= vxge_hw_vpath_mcast_enable(vpath
->handle
);
1260 if (status
!= VXGE_HW_OK
) {
1261 vxge_debug_init(VXGE_ERR
,
1262 "%s:%d Enabling all multicasts failed",
1263 __func__
, __LINE__
);
1265 vdev
->all_multi_flg
= 1;
1267 dev
->flags
|= IFF_ALLMULTI
;
1270 vxge_debug_entryexit(VXGE_TRACE
,
1271 "%s:%d Exiting...", __func__
, __LINE__
);
1276 * @dev: pointer to the device structure
1278 * Update entry "0" (default MAC addr)
1280 static int vxge_set_mac_addr(struct net_device
*dev
, void *p
)
1282 struct sockaddr
*addr
= p
;
1283 struct vxgedev
*vdev
;
1284 struct __vxge_hw_device
*hldev
;
1285 enum vxge_hw_status status
= VXGE_HW_OK
;
1286 struct macInfo mac_info_new
, mac_info_old
;
1289 vxge_debug_entryexit(VXGE_TRACE
, "%s:%d", __func__
, __LINE__
);
1291 vdev
= netdev_priv(dev
);
1294 if (!is_valid_ether_addr(addr
->sa_data
))
1297 memset(&mac_info_new
, 0, sizeof(struct macInfo
));
1298 memset(&mac_info_old
, 0, sizeof(struct macInfo
));
1300 vxge_debug_entryexit(VXGE_TRACE
, "%s:%d Exiting...",
1301 __func__
, __LINE__
);
1303 /* Get the old address */
1304 memcpy(mac_info_old
.macaddr
, dev
->dev_addr
, dev
->addr_len
);
1306 /* Copy the new address */
1307 memcpy(mac_info_new
.macaddr
, addr
->sa_data
, dev
->addr_len
);
1309 /* First delete the old mac address from all the vpaths
1310 as we can't specify the index while adding new mac address */
1311 for (vpath_idx
= 0; vpath_idx
< vdev
->no_of_vpath
; vpath_idx
++) {
1312 struct vxge_vpath
*vpath
= &vdev
->vpaths
[vpath_idx
];
1313 if (!vpath
->is_open
) {
1314 /* This can happen when this interface is added/removed
1315 to the bonding interface. Delete this station address
1316 from the linked list */
1317 vxge_mac_list_del(vpath
, &mac_info_old
);
1319 /* Add this new address to the linked list
1320 for later restoring */
1321 vxge_mac_list_add(vpath
, &mac_info_new
);
1325 /* Delete the station address */
1326 mac_info_old
.vpath_no
= vpath_idx
;
1327 status
= vxge_del_mac_addr(vdev
, &mac_info_old
);
1330 if (unlikely(!is_vxge_card_up(vdev
))) {
1331 memcpy(dev
->dev_addr
, addr
->sa_data
, dev
->addr_len
);
1335 /* Set this mac address to all the vpaths */
1336 for (vpath_idx
= 0; vpath_idx
< vdev
->no_of_vpath
; vpath_idx
++) {
1337 mac_info_new
.vpath_no
= vpath_idx
;
1338 mac_info_new
.state
= VXGE_LL_MAC_ADDR_IN_DA_TABLE
;
1339 status
= vxge_add_mac_addr(vdev
, &mac_info_new
);
1340 if (status
!= VXGE_HW_OK
)
1344 memcpy(dev
->dev_addr
, addr
->sa_data
, dev
->addr_len
);
1350 * vxge_vpath_intr_enable
1351 * @vdev: pointer to vdev
1352 * @vp_id: vpath for which to enable the interrupts
1354 * Enables the interrupts for the vpath
1356 static void vxge_vpath_intr_enable(struct vxgedev
*vdev
, int vp_id
)
1358 struct vxge_vpath
*vpath
= &vdev
->vpaths
[vp_id
];
1360 int tim_msix_id
[4] = {0, 1, 0, 0};
1361 int alarm_msix_id
= VXGE_ALARM_MSIX_ID
;
1363 vxge_hw_vpath_intr_enable(vpath
->handle
);
1365 if (vdev
->config
.intr_type
== INTA
)
1366 vxge_hw_vpath_inta_unmask_tx_rx(vpath
->handle
);
1368 vxge_hw_vpath_msix_set(vpath
->handle
, tim_msix_id
,
1371 msix_id
= vpath
->device_id
* VXGE_HW_VPATH_MSIX_ACTIVE
;
1372 vxge_hw_vpath_msix_unmask(vpath
->handle
, msix_id
);
1373 vxge_hw_vpath_msix_unmask(vpath
->handle
, msix_id
+ 1);
1375 /* enable the alarm vector */
1376 msix_id
= (vpath
->handle
->vpath
->hldev
->first_vp_id
*
1377 VXGE_HW_VPATH_MSIX_ACTIVE
) + alarm_msix_id
;
1378 vxge_hw_vpath_msix_unmask(vpath
->handle
, msix_id
);
1383 * vxge_vpath_intr_disable
1384 * @vdev: pointer to vdev
1385 * @vp_id: vpath for which to disable the interrupts
1387 * Disables the interrupts for the vpath
1389 static void vxge_vpath_intr_disable(struct vxgedev
*vdev
, int vp_id
)
1391 struct vxge_vpath
*vpath
= &vdev
->vpaths
[vp_id
];
1392 struct __vxge_hw_device
*hldev
;
1395 hldev
= pci_get_drvdata(vdev
->pdev
);
1397 vxge_hw_vpath_wait_receive_idle(hldev
, vpath
->device_id
);
1399 vxge_hw_vpath_intr_disable(vpath
->handle
);
1401 if (vdev
->config
.intr_type
== INTA
)
1402 vxge_hw_vpath_inta_mask_tx_rx(vpath
->handle
);
1404 msix_id
= vpath
->device_id
* VXGE_HW_VPATH_MSIX_ACTIVE
;
1405 vxge_hw_vpath_msix_mask(vpath
->handle
, msix_id
);
1406 vxge_hw_vpath_msix_mask(vpath
->handle
, msix_id
+ 1);
1408 /* disable the alarm vector */
1409 msix_id
= (vpath
->handle
->vpath
->hldev
->first_vp_id
*
1410 VXGE_HW_VPATH_MSIX_ACTIVE
) + VXGE_ALARM_MSIX_ID
;
1411 vxge_hw_vpath_msix_mask(vpath
->handle
, msix_id
);
1415 /* list all mac addresses from DA table */
1416 static enum vxge_hw_status
1417 vxge_search_mac_addr_in_da_table(struct vxge_vpath
*vpath
, struct macInfo
*mac
)
1419 enum vxge_hw_status status
= VXGE_HW_OK
;
1420 unsigned char macmask
[ETH_ALEN
];
1421 unsigned char macaddr
[ETH_ALEN
];
1423 status
= vxge_hw_vpath_mac_addr_get(vpath
->handle
,
1425 if (status
!= VXGE_HW_OK
) {
1426 vxge_debug_init(VXGE_ERR
,
1427 "DA config list entry failed for vpath:%d",
1432 while (memcmp(mac
->macaddr
, macaddr
, ETH_ALEN
)) {
1433 status
= vxge_hw_vpath_mac_addr_get_next(vpath
->handle
,
1435 if (status
!= VXGE_HW_OK
)
1442 /* Store all mac addresses from the list to the DA table */
1443 static enum vxge_hw_status
vxge_restore_vpath_mac_addr(struct vxge_vpath
*vpath
)
1445 enum vxge_hw_status status
= VXGE_HW_OK
;
1446 struct macInfo mac_info
;
1447 u8
*mac_address
= NULL
;
1448 struct list_head
*entry
, *next
;
1450 memset(&mac_info
, 0, sizeof(struct macInfo
));
1452 if (vpath
->is_open
) {
1453 list_for_each_safe(entry
, next
, &vpath
->mac_addr_list
) {
1456 ((struct vxge_mac_addrs
*)entry
)->macaddr
;
1457 memcpy(mac_info
.macaddr
, mac_address
, ETH_ALEN
);
1458 ((struct vxge_mac_addrs
*)entry
)->state
=
1459 VXGE_LL_MAC_ADDR_IN_DA_TABLE
;
1460 /* does this mac address already exist in da table? */
1461 status
= vxge_search_mac_addr_in_da_table(vpath
,
1463 if (status
!= VXGE_HW_OK
) {
1464 /* Add this mac address to the DA table */
1465 status
= vxge_hw_vpath_mac_addr_add(
1466 vpath
->handle
, mac_info
.macaddr
,
1468 VXGE_HW_VPATH_MAC_ADDR_ADD_DUPLICATE
);
1469 if (status
!= VXGE_HW_OK
) {
1470 vxge_debug_init(VXGE_ERR
,
1471 "DA add entry failed for vpath:%d",
1473 ((struct vxge_mac_addrs
*)entry
)->state
1474 = VXGE_LL_MAC_ADDR_IN_LIST
;
1483 /* Store all vlan ids from the list to the vid table */
1484 static enum vxge_hw_status
1485 vxge_restore_vpath_vid_table(struct vxge_vpath
*vpath
)
1487 enum vxge_hw_status status
= VXGE_HW_OK
;
1488 struct vxgedev
*vdev
= vpath
->vdev
;
1491 if (vdev
->vlgrp
&& vpath
->is_open
) {
1493 for (vid
= 0; vid
< VLAN_N_VID
; vid
++) {
1494 if (!vlan_group_get_device(vdev
->vlgrp
, vid
))
1496 /* Add these vlan to the vid table */
1497 status
= vxge_hw_vpath_vid_add(vpath
->handle
, vid
);
1506 * @vdev: pointer to vdev
1507 * @vp_id: vpath to reset
1511 static int vxge_reset_vpath(struct vxgedev
*vdev
, int vp_id
)
1513 enum vxge_hw_status status
= VXGE_HW_OK
;
1514 struct vxge_vpath
*vpath
= &vdev
->vpaths
[vp_id
];
1517 /* check if device is down already */
1518 if (unlikely(!is_vxge_card_up(vdev
)))
1521 /* is device reset already scheduled */
1522 if (test_bit(__VXGE_STATE_RESET_CARD
, &vdev
->state
))
1525 if (vpath
->handle
) {
1526 if (vxge_hw_vpath_reset(vpath
->handle
) == VXGE_HW_OK
) {
1527 if (is_vxge_card_up(vdev
) &&
1528 vxge_hw_vpath_recover_from_reset(vpath
->handle
)
1530 vxge_debug_init(VXGE_ERR
,
1531 "vxge_hw_vpath_recover_from_reset"
1532 "failed for vpath:%d", vp_id
);
1536 vxge_debug_init(VXGE_ERR
,
1537 "vxge_hw_vpath_reset failed for"
1542 return VXGE_HW_FAIL
;
1544 vxge_restore_vpath_mac_addr(vpath
);
1545 vxge_restore_vpath_vid_table(vpath
);
1547 /* Enable all broadcast */
1548 vxge_hw_vpath_bcast_enable(vpath
->handle
);
1550 /* Enable all multicast */
1551 if (vdev
->all_multi_flg
) {
1552 status
= vxge_hw_vpath_mcast_enable(vpath
->handle
);
1553 if (status
!= VXGE_HW_OK
)
1554 vxge_debug_init(VXGE_ERR
,
1555 "%s:%d Enabling multicast failed",
1556 __func__
, __LINE__
);
1559 /* Enable the interrupts */
1560 vxge_vpath_intr_enable(vdev
, vp_id
);
1564 /* Enable the flow of traffic through the vpath */
1565 vxge_hw_vpath_enable(vpath
->handle
);
1568 vxge_hw_vpath_rx_doorbell_init(vpath
->handle
);
1569 vpath
->ring
.last_status
= VXGE_HW_OK
;
1571 /* Vpath reset done */
1572 clear_bit(vp_id
, &vdev
->vp_reset
);
1574 /* Start the vpath queue */
1575 if (netif_tx_queue_stopped(vpath
->fifo
.txq
))
1576 netif_tx_wake_queue(vpath
->fifo
.txq
);
1582 static void vxge_config_ci_for_tti_rti(struct vxgedev
*vdev
)
1586 /* Enable CI for RTI */
1587 if (vdev
->config
.intr_type
== MSI_X
) {
1588 for (i
= 0; i
< vdev
->no_of_vpath
; i
++) {
1589 struct __vxge_hw_ring
*hw_ring
;
1591 hw_ring
= vdev
->vpaths
[i
].ring
.handle
;
1592 vxge_hw_vpath_dynamic_rti_ci_set(hw_ring
);
1596 /* Enable CI for TTI */
1597 for (i
= 0; i
< vdev
->no_of_vpath
; i
++) {
1598 struct __vxge_hw_fifo
*hw_fifo
= vdev
->vpaths
[i
].fifo
.handle
;
1599 vxge_hw_vpath_tti_ci_set(hw_fifo
);
1601 * For Inta (with or without napi), Set CI ON for only one
1602 * vpath. (Have only one free running timer).
1604 if ((vdev
->config
.intr_type
== INTA
) && (i
== 0))
1611 static int do_vxge_reset(struct vxgedev
*vdev
, int event
)
1613 enum vxge_hw_status status
;
1614 int ret
= 0, vp_id
, i
;
1616 vxge_debug_entryexit(VXGE_TRACE
, "%s:%d", __func__
, __LINE__
);
1618 if ((event
== VXGE_LL_FULL_RESET
) || (event
== VXGE_LL_START_RESET
)) {
1619 /* check if device is down already */
1620 if (unlikely(!is_vxge_card_up(vdev
)))
1623 /* is reset already scheduled */
1624 if (test_and_set_bit(__VXGE_STATE_RESET_CARD
, &vdev
->state
))
1628 if (event
== VXGE_LL_FULL_RESET
) {
1629 netif_carrier_off(vdev
->ndev
);
1631 /* wait for all the vpath reset to complete */
1632 for (vp_id
= 0; vp_id
< vdev
->no_of_vpath
; vp_id
++) {
1633 while (test_bit(vp_id
, &vdev
->vp_reset
))
1637 netif_carrier_on(vdev
->ndev
);
1639 /* if execution mode is set to debug, don't reset the adapter */
1640 if (unlikely(vdev
->exec_mode
)) {
1641 vxge_debug_init(VXGE_ERR
,
1642 "%s: execution mode is debug, returning..",
1644 clear_bit(__VXGE_STATE_CARD_UP
, &vdev
->state
);
1645 netif_tx_stop_all_queues(vdev
->ndev
);
1650 if (event
== VXGE_LL_FULL_RESET
) {
1651 vxge_hw_device_wait_receive_idle(vdev
->devh
);
1652 vxge_hw_device_intr_disable(vdev
->devh
);
1654 switch (vdev
->cric_err_event
) {
1655 case VXGE_HW_EVENT_UNKNOWN
:
1656 netif_tx_stop_all_queues(vdev
->ndev
);
1657 vxge_debug_init(VXGE_ERR
,
1658 "fatal: %s: Disabling device due to"
1663 case VXGE_HW_EVENT_RESET_START
:
1665 case VXGE_HW_EVENT_RESET_COMPLETE
:
1666 case VXGE_HW_EVENT_LINK_DOWN
:
1667 case VXGE_HW_EVENT_LINK_UP
:
1668 case VXGE_HW_EVENT_ALARM_CLEARED
:
1669 case VXGE_HW_EVENT_ECCERR
:
1670 case VXGE_HW_EVENT_MRPCIM_ECCERR
:
1673 case VXGE_HW_EVENT_FIFO_ERR
:
1674 case VXGE_HW_EVENT_VPATH_ERR
:
1676 case VXGE_HW_EVENT_CRITICAL_ERR
:
1677 netif_tx_stop_all_queues(vdev
->ndev
);
1678 vxge_debug_init(VXGE_ERR
,
1679 "fatal: %s: Disabling device due to"
1682 /* SOP or device reset required */
1683 /* This event is not currently used */
1686 case VXGE_HW_EVENT_SERR
:
1687 netif_tx_stop_all_queues(vdev
->ndev
);
1688 vxge_debug_init(VXGE_ERR
,
1689 "fatal: %s: Disabling device due to"
1694 case VXGE_HW_EVENT_SRPCIM_SERR
:
1695 case VXGE_HW_EVENT_MRPCIM_SERR
:
1698 case VXGE_HW_EVENT_SLOT_FREEZE
:
1699 netif_tx_stop_all_queues(vdev
->ndev
);
1700 vxge_debug_init(VXGE_ERR
,
1701 "fatal: %s: Disabling device due to"
1712 if ((event
== VXGE_LL_FULL_RESET
) || (event
== VXGE_LL_START_RESET
))
1713 netif_tx_stop_all_queues(vdev
->ndev
);
1715 if (event
== VXGE_LL_FULL_RESET
) {
1716 status
= vxge_reset_all_vpaths(vdev
);
1717 if (status
!= VXGE_HW_OK
) {
1718 vxge_debug_init(VXGE_ERR
,
1719 "fatal: %s: can not reset vpaths",
1726 if (event
== VXGE_LL_COMPL_RESET
) {
1727 for (i
= 0; i
< vdev
->no_of_vpath
; i
++)
1728 if (vdev
->vpaths
[i
].handle
) {
1729 if (vxge_hw_vpath_recover_from_reset(
1730 vdev
->vpaths
[i
].handle
)
1732 vxge_debug_init(VXGE_ERR
,
1733 "vxge_hw_vpath_recover_"
1734 "from_reset failed for vpath: "
1740 vxge_debug_init(VXGE_ERR
,
1741 "vxge_hw_vpath_reset failed for "
1748 if ((event
== VXGE_LL_FULL_RESET
) || (event
== VXGE_LL_COMPL_RESET
)) {
1749 /* Reprogram the DA table with populated mac addresses */
1750 for (vp_id
= 0; vp_id
< vdev
->no_of_vpath
; vp_id
++) {
1751 vxge_restore_vpath_mac_addr(&vdev
->vpaths
[vp_id
]);
1752 vxge_restore_vpath_vid_table(&vdev
->vpaths
[vp_id
]);
1755 /* enable vpath interrupts */
1756 for (i
= 0; i
< vdev
->no_of_vpath
; i
++)
1757 vxge_vpath_intr_enable(vdev
, i
);
1759 vxge_hw_device_intr_enable(vdev
->devh
);
1763 /* Indicate card up */
1764 set_bit(__VXGE_STATE_CARD_UP
, &vdev
->state
);
1766 /* Get the traffic to flow through the vpaths */
1767 for (i
= 0; i
< vdev
->no_of_vpath
; i
++) {
1768 vxge_hw_vpath_enable(vdev
->vpaths
[i
].handle
);
1770 vxge_hw_vpath_rx_doorbell_init(vdev
->vpaths
[i
].handle
);
1773 netif_tx_wake_all_queues(vdev
->ndev
);
1777 vxge_config_ci_for_tti_rti(vdev
);
1780 vxge_debug_entryexit(VXGE_TRACE
,
1781 "%s:%d Exiting...", __func__
, __LINE__
);
1783 /* Indicate reset done */
1784 if ((event
== VXGE_LL_FULL_RESET
) || (event
== VXGE_LL_COMPL_RESET
))
1785 clear_bit(__VXGE_STATE_RESET_CARD
, &vdev
->state
);
1791 * @vdev: pointer to ll device
1793 * driver may reset the chip on events of serr, eccerr, etc
1795 static void vxge_reset(struct work_struct
*work
)
1797 struct vxgedev
*vdev
= container_of(work
, struct vxgedev
, reset_task
);
1799 if (!netif_running(vdev
->ndev
))
1802 do_vxge_reset(vdev
, VXGE_LL_FULL_RESET
);
1806 * vxge_poll - Receive handler when Receive Polling is used.
1807 * @dev: pointer to the device structure.
1808 * @budget: Number of packets budgeted to be processed in this iteration.
1810 * This function comes into picture only if Receive side is being handled
1811 * through polling (called NAPI in linux). It mostly does what the normal
1812 * Rx interrupt handler does in terms of descriptor and packet processing
1813 * but not in an interrupt context. Also it will process a specified number
1814 * of packets at most in one iteration. This value is passed down by the
1815 * kernel as the function argument 'budget'.
1817 static int vxge_poll_msix(struct napi_struct
*napi
, int budget
)
1819 struct vxge_ring
*ring
= container_of(napi
, struct vxge_ring
, napi
);
1821 int budget_org
= budget
;
1823 ring
->budget
= budget
;
1824 ring
->pkts_processed
= 0;
1825 vxge_hw_vpath_poll_rx(ring
->handle
);
1826 pkts_processed
= ring
->pkts_processed
;
1828 if (ring
->pkts_processed
< budget_org
) {
1829 napi_complete(napi
);
1831 /* Re enable the Rx interrupts for the vpath */
1832 vxge_hw_channel_msix_unmask(
1833 (struct __vxge_hw_channel
*)ring
->handle
,
1834 ring
->rx_vector_no
);
1838 /* We are copying and returning the local variable, in case if after
1839 * clearing the msix interrupt above, if the interrupt fires right
1840 * away which can preempt this NAPI thread */
1841 return pkts_processed
;
1844 static int vxge_poll_inta(struct napi_struct
*napi
, int budget
)
1846 struct vxgedev
*vdev
= container_of(napi
, struct vxgedev
, napi
);
1847 int pkts_processed
= 0;
1849 int budget_org
= budget
;
1850 struct vxge_ring
*ring
;
1852 struct __vxge_hw_device
*hldev
= pci_get_drvdata(vdev
->pdev
);
1854 for (i
= 0; i
< vdev
->no_of_vpath
; i
++) {
1855 ring
= &vdev
->vpaths
[i
].ring
;
1856 ring
->budget
= budget
;
1857 ring
->pkts_processed
= 0;
1858 vxge_hw_vpath_poll_rx(ring
->handle
);
1859 pkts_processed
+= ring
->pkts_processed
;
1860 budget
-= ring
->pkts_processed
;
1865 VXGE_COMPLETE_ALL_TX(vdev
);
1867 if (pkts_processed
< budget_org
) {
1868 napi_complete(napi
);
1869 /* Re enable the Rx interrupts for the ring */
1870 vxge_hw_device_unmask_all(hldev
);
1871 vxge_hw_device_flush_io(hldev
);
1874 return pkts_processed
;
1877 #ifdef CONFIG_NET_POLL_CONTROLLER
1879 * vxge_netpoll - netpoll event handler entry point
1880 * @dev : pointer to the device structure.
1882 * This function will be called by upper layer to check for events on the
1883 * interface in situations where interrupts are disabled. It is used for
1884 * specific in-kernel networking tasks, such as remote consoles and kernel
1885 * debugging over the network (example netdump in RedHat).
1887 static void vxge_netpoll(struct net_device
*dev
)
1889 struct __vxge_hw_device
*hldev
;
1890 struct vxgedev
*vdev
;
1892 vdev
= netdev_priv(dev
);
1893 hldev
= pci_get_drvdata(vdev
->pdev
);
1895 vxge_debug_entryexit(VXGE_TRACE
, "%s:%d", __func__
, __LINE__
);
1897 if (pci_channel_offline(vdev
->pdev
))
1900 disable_irq(dev
->irq
);
1901 vxge_hw_device_clear_tx_rx(hldev
);
1903 vxge_hw_device_clear_tx_rx(hldev
);
1904 VXGE_COMPLETE_ALL_RX(vdev
);
1905 VXGE_COMPLETE_ALL_TX(vdev
);
1907 enable_irq(dev
->irq
);
1909 vxge_debug_entryexit(VXGE_TRACE
,
1910 "%s:%d Exiting...", __func__
, __LINE__
);
1914 /* RTH configuration */
1915 static enum vxge_hw_status
vxge_rth_configure(struct vxgedev
*vdev
)
1917 enum vxge_hw_status status
= VXGE_HW_OK
;
1918 struct vxge_hw_rth_hash_types hash_types
;
1919 u8 itable
[256] = {0}; /* indirection table */
1920 u8 mtable
[256] = {0}; /* CPU to vpath mapping */
1925 * - itable with bucket numbers
1926 * - mtable with bucket-to-vpath mapping
1928 for (index
= 0; index
< (1 << vdev
->config
.rth_bkt_sz
); index
++) {
1929 itable
[index
] = index
;
1930 mtable
[index
] = index
% vdev
->no_of_vpath
;
1933 /* set indirection table, bucket-to-vpath mapping */
1934 status
= vxge_hw_vpath_rts_rth_itable_set(vdev
->vp_handles
,
1937 vdev
->config
.rth_bkt_sz
);
1938 if (status
!= VXGE_HW_OK
) {
1939 vxge_debug_init(VXGE_ERR
,
1940 "RTH indirection table configuration failed "
1941 "for vpath:%d", vdev
->vpaths
[0].device_id
);
1945 /* Fill RTH hash types */
1946 hash_types
.hash_type_tcpipv4_en
= vdev
->config
.rth_hash_type_tcpipv4
;
1947 hash_types
.hash_type_ipv4_en
= vdev
->config
.rth_hash_type_ipv4
;
1948 hash_types
.hash_type_tcpipv6_en
= vdev
->config
.rth_hash_type_tcpipv6
;
1949 hash_types
.hash_type_ipv6_en
= vdev
->config
.rth_hash_type_ipv6
;
1950 hash_types
.hash_type_tcpipv6ex_en
=
1951 vdev
->config
.rth_hash_type_tcpipv6ex
;
1952 hash_types
.hash_type_ipv6ex_en
= vdev
->config
.rth_hash_type_ipv6ex
;
1955 * Because the itable_set() method uses the active_table field
1956 * for the target virtual path the RTH config should be updated
1957 * for all VPATHs. The h/w only uses the lowest numbered VPATH
1958 * when steering frames.
1960 for (index
= 0; index
< vdev
->no_of_vpath
; index
++) {
1961 status
= vxge_hw_vpath_rts_rth_set(
1962 vdev
->vpaths
[index
].handle
,
1963 vdev
->config
.rth_algorithm
,
1965 vdev
->config
.rth_bkt_sz
);
1966 if (status
!= VXGE_HW_OK
) {
1967 vxge_debug_init(VXGE_ERR
,
1968 "RTH configuration failed for vpath:%d",
1969 vdev
->vpaths
[index
].device_id
);
1978 enum vxge_hw_status
vxge_reset_all_vpaths(struct vxgedev
*vdev
)
1980 enum vxge_hw_status status
= VXGE_HW_OK
;
1981 struct vxge_vpath
*vpath
;
1984 for (i
= 0; i
< vdev
->no_of_vpath
; i
++) {
1985 vpath
= &vdev
->vpaths
[i
];
1986 if (vpath
->handle
) {
1987 if (vxge_hw_vpath_reset(vpath
->handle
) == VXGE_HW_OK
) {
1988 if (is_vxge_card_up(vdev
) &&
1989 vxge_hw_vpath_recover_from_reset(
1990 vpath
->handle
) != VXGE_HW_OK
) {
1991 vxge_debug_init(VXGE_ERR
,
1992 "vxge_hw_vpath_recover_"
1993 "from_reset failed for vpath: "
1998 vxge_debug_init(VXGE_ERR
,
1999 "vxge_hw_vpath_reset failed for "
2010 static void vxge_close_vpaths(struct vxgedev
*vdev
, int index
)
2012 struct vxge_vpath
*vpath
;
2015 for (i
= index
; i
< vdev
->no_of_vpath
; i
++) {
2016 vpath
= &vdev
->vpaths
[i
];
2018 if (vpath
->handle
&& vpath
->is_open
) {
2019 vxge_hw_vpath_close(vpath
->handle
);
2020 vdev
->stats
.vpaths_open
--;
2023 vpath
->handle
= NULL
;
2028 static int vxge_open_vpaths(struct vxgedev
*vdev
)
2030 struct vxge_hw_vpath_attr attr
;
2031 enum vxge_hw_status status
;
2032 struct vxge_vpath
*vpath
;
2036 for (i
= 0; i
< vdev
->no_of_vpath
; i
++) {
2037 vpath
= &vdev
->vpaths
[i
];
2038 vxge_assert(vpath
->is_configured
);
2040 if (!vdev
->titan1
) {
2041 struct vxge_hw_vp_config
*vcfg
;
2042 vcfg
= &vdev
->devh
->config
.vp_config
[vpath
->device_id
];
2044 vcfg
->rti
.urange_a
= RTI_T1A_RX_URANGE_A
;
2045 vcfg
->rti
.urange_b
= RTI_T1A_RX_URANGE_B
;
2046 vcfg
->rti
.urange_c
= RTI_T1A_RX_URANGE_C
;
2047 vcfg
->tti
.uec_a
= TTI_T1A_TX_UFC_A
;
2048 vcfg
->tti
.uec_b
= TTI_T1A_TX_UFC_B
;
2049 vcfg
->tti
.uec_c
= TTI_T1A_TX_UFC_C(vdev
->mtu
);
2050 vcfg
->tti
.uec_d
= TTI_T1A_TX_UFC_D(vdev
->mtu
);
2051 vcfg
->tti
.ltimer_val
= VXGE_T1A_TTI_LTIMER_VAL
;
2052 vcfg
->tti
.rtimer_val
= VXGE_T1A_TTI_RTIMER_VAL
;
2055 attr
.vp_id
= vpath
->device_id
;
2056 attr
.fifo_attr
.callback
= vxge_xmit_compl
;
2057 attr
.fifo_attr
.txdl_term
= vxge_tx_term
;
2058 attr
.fifo_attr
.per_txdl_space
= sizeof(struct vxge_tx_priv
);
2059 attr
.fifo_attr
.userdata
= &vpath
->fifo
;
2061 attr
.ring_attr
.callback
= vxge_rx_1b_compl
;
2062 attr
.ring_attr
.rxd_init
= vxge_rx_initial_replenish
;
2063 attr
.ring_attr
.rxd_term
= vxge_rx_term
;
2064 attr
.ring_attr
.per_rxd_space
= sizeof(struct vxge_rx_priv
);
2065 attr
.ring_attr
.userdata
= &vpath
->ring
;
2067 vpath
->ring
.ndev
= vdev
->ndev
;
2068 vpath
->ring
.pdev
= vdev
->pdev
;
2070 status
= vxge_hw_vpath_open(vdev
->devh
, &attr
, &vpath
->handle
);
2071 if (status
== VXGE_HW_OK
) {
2072 vpath
->fifo
.handle
=
2073 (struct __vxge_hw_fifo
*)attr
.fifo_attr
.userdata
;
2074 vpath
->ring
.handle
=
2075 (struct __vxge_hw_ring
*)attr
.ring_attr
.userdata
;
2076 vpath
->fifo
.tx_steering_type
=
2077 vdev
->config
.tx_steering_type
;
2078 vpath
->fifo
.ndev
= vdev
->ndev
;
2079 vpath
->fifo
.pdev
= vdev
->pdev
;
2080 if (vdev
->config
.tx_steering_type
)
2082 netdev_get_tx_queue(vdev
->ndev
, i
);
2085 netdev_get_tx_queue(vdev
->ndev
, 0);
2086 vpath
->fifo
.indicate_max_pkts
=
2087 vdev
->config
.fifo_indicate_max_pkts
;
2088 vpath
->fifo
.tx_vector_no
= 0;
2089 vpath
->ring
.rx_vector_no
= 0;
2090 vpath
->ring
.rx_hwts
= vdev
->rx_hwts
;
2092 vdev
->vp_handles
[i
] = vpath
->handle
;
2093 vpath
->ring
.vlan_tag_strip
= vdev
->vlan_tag_strip
;
2094 vdev
->stats
.vpaths_open
++;
2096 vdev
->stats
.vpath_open_fail
++;
2097 vxge_debug_init(VXGE_ERR
, "%s: vpath: %d failed to "
2098 "open with status: %d",
2099 vdev
->ndev
->name
, vpath
->device_id
,
2101 vxge_close_vpaths(vdev
, 0);
2105 vp_id
= vpath
->handle
->vpath
->vp_id
;
2106 vdev
->vpaths_deployed
|= vxge_mBIT(vp_id
);
2113 * adaptive_coalesce_tx_interrupts - Changes the interrupt coalescing
2114 * if the interrupts are not within a range
2115 * @fifo: pointer to transmit fifo structure
2116 * Description: The function changes boundary timer and restriction timer
2117 * value depends on the traffic
2118 * Return Value: None
2120 static void adaptive_coalesce_tx_interrupts(struct vxge_fifo
*fifo
)
2122 fifo
->interrupt_count
++;
2123 if (jiffies
> fifo
->jiffies
+ HZ
/ 100) {
2124 struct __vxge_hw_fifo
*hw_fifo
= fifo
->handle
;
2126 fifo
->jiffies
= jiffies
;
2127 if (fifo
->interrupt_count
> VXGE_T1A_MAX_TX_INTERRUPT_COUNT
&&
2128 hw_fifo
->rtimer
!= VXGE_TTI_RTIMER_ADAPT_VAL
) {
2129 hw_fifo
->rtimer
= VXGE_TTI_RTIMER_ADAPT_VAL
;
2130 vxge_hw_vpath_dynamic_tti_rtimer_set(hw_fifo
);
2131 } else if (hw_fifo
->rtimer
!= 0) {
2132 hw_fifo
->rtimer
= 0;
2133 vxge_hw_vpath_dynamic_tti_rtimer_set(hw_fifo
);
2135 fifo
->interrupt_count
= 0;
2140 * adaptive_coalesce_rx_interrupts - Changes the interrupt coalescing
2141 * if the interrupts are not within a range
2142 * @ring: pointer to receive ring structure
2143 * Description: The function increases of decreases the packet counts within
2144 * the ranges of traffic utilization, if the interrupts due to this ring are
2145 * not within a fixed range.
2146 * Return Value: Nothing
2148 static void adaptive_coalesce_rx_interrupts(struct vxge_ring
*ring
)
2150 ring
->interrupt_count
++;
2151 if (jiffies
> ring
->jiffies
+ HZ
/ 100) {
2152 struct __vxge_hw_ring
*hw_ring
= ring
->handle
;
2154 ring
->jiffies
= jiffies
;
2155 if (ring
->interrupt_count
> VXGE_T1A_MAX_INTERRUPT_COUNT
&&
2156 hw_ring
->rtimer
!= VXGE_RTI_RTIMER_ADAPT_VAL
) {
2157 hw_ring
->rtimer
= VXGE_RTI_RTIMER_ADAPT_VAL
;
2158 vxge_hw_vpath_dynamic_rti_rtimer_set(hw_ring
);
2159 } else if (hw_ring
->rtimer
!= 0) {
2160 hw_ring
->rtimer
= 0;
2161 vxge_hw_vpath_dynamic_rti_rtimer_set(hw_ring
);
2163 ring
->interrupt_count
= 0;
2169 * @irq: the irq of the device.
2170 * @dev_id: a void pointer to the hldev structure of the Titan device
2171 * @ptregs: pointer to the registers pushed on the stack.
2173 * This function is the ISR handler of the device when napi is enabled. It
2174 * identifies the reason for the interrupt and calls the relevant service
2177 static irqreturn_t
vxge_isr_napi(int irq
, void *dev_id
)
2179 struct net_device
*dev
;
2180 struct __vxge_hw_device
*hldev
;
2182 enum vxge_hw_status status
;
2183 struct vxgedev
*vdev
= (struct vxgedev
*)dev_id
;
2185 vxge_debug_intr(VXGE_TRACE
, "%s:%d", __func__
, __LINE__
);
2188 hldev
= pci_get_drvdata(vdev
->pdev
);
2190 if (pci_channel_offline(vdev
->pdev
))
2193 if (unlikely(!is_vxge_card_up(vdev
)))
2196 status
= vxge_hw_device_begin_irq(hldev
, vdev
->exec_mode
, &reason
);
2197 if (status
== VXGE_HW_OK
) {
2198 vxge_hw_device_mask_all(hldev
);
2201 VXGE_HW_TITAN_GENERAL_INT_STATUS_VPATH_TRAFFIC_INT(
2202 vdev
->vpaths_deployed
>>
2203 (64 - VXGE_HW_MAX_VIRTUAL_PATHS
))) {
2205 vxge_hw_device_clear_tx_rx(hldev
);
2206 napi_schedule(&vdev
->napi
);
2207 vxge_debug_intr(VXGE_TRACE
,
2208 "%s:%d Exiting...", __func__
, __LINE__
);
2211 vxge_hw_device_unmask_all(hldev
);
2212 } else if (unlikely((status
== VXGE_HW_ERR_VPATH
) ||
2213 (status
== VXGE_HW_ERR_CRITICAL
) ||
2214 (status
== VXGE_HW_ERR_FIFO
))) {
2215 vxge_hw_device_mask_all(hldev
);
2216 vxge_hw_device_flush_io(hldev
);
2218 } else if (unlikely(status
== VXGE_HW_ERR_SLOT_FREEZE
))
2221 vxge_debug_intr(VXGE_TRACE
, "%s:%d Exiting...", __func__
, __LINE__
);
2225 #ifdef CONFIG_PCI_MSI
2227 static irqreturn_t
vxge_tx_msix_handle(int irq
, void *dev_id
)
2229 struct vxge_fifo
*fifo
= (struct vxge_fifo
*)dev_id
;
2231 adaptive_coalesce_tx_interrupts(fifo
);
2233 vxge_hw_channel_msix_mask((struct __vxge_hw_channel
*)fifo
->handle
,
2234 fifo
->tx_vector_no
);
2236 vxge_hw_channel_msix_clear((struct __vxge_hw_channel
*)fifo
->handle
,
2237 fifo
->tx_vector_no
);
2239 VXGE_COMPLETE_VPATH_TX(fifo
);
2241 vxge_hw_channel_msix_unmask((struct __vxge_hw_channel
*)fifo
->handle
,
2242 fifo
->tx_vector_no
);
2249 static irqreturn_t
vxge_rx_msix_napi_handle(int irq
, void *dev_id
)
2251 struct vxge_ring
*ring
= (struct vxge_ring
*)dev_id
;
2253 adaptive_coalesce_rx_interrupts(ring
);
2255 vxge_hw_channel_msix_mask((struct __vxge_hw_channel
*)ring
->handle
,
2256 ring
->rx_vector_no
);
2258 vxge_hw_channel_msix_clear((struct __vxge_hw_channel
*)ring
->handle
,
2259 ring
->rx_vector_no
);
2261 napi_schedule(&ring
->napi
);
2266 vxge_alarm_msix_handle(int irq
, void *dev_id
)
2269 enum vxge_hw_status status
;
2270 struct vxge_vpath
*vpath
= (struct vxge_vpath
*)dev_id
;
2271 struct vxgedev
*vdev
= vpath
->vdev
;
2272 int msix_id
= (vpath
->handle
->vpath
->vp_id
*
2273 VXGE_HW_VPATH_MSIX_ACTIVE
) + VXGE_ALARM_MSIX_ID
;
2275 for (i
= 0; i
< vdev
->no_of_vpath
; i
++) {
2276 /* Reduce the chance of losing alarm interrupts by masking
2277 * the vector. A pending bit will be set if an alarm is
2278 * generated and on unmask the interrupt will be fired.
2280 vxge_hw_vpath_msix_mask(vdev
->vpaths
[i
].handle
, msix_id
);
2281 vxge_hw_vpath_msix_clear(vdev
->vpaths
[i
].handle
, msix_id
);
2284 status
= vxge_hw_vpath_alarm_process(vdev
->vpaths
[i
].handle
,
2286 if (status
== VXGE_HW_OK
) {
2287 vxge_hw_vpath_msix_unmask(vdev
->vpaths
[i
].handle
,
2292 vxge_debug_intr(VXGE_ERR
,
2293 "%s: vxge_hw_vpath_alarm_process failed %x ",
2294 VXGE_DRIVER_NAME
, status
);
2299 static int vxge_alloc_msix(struct vxgedev
*vdev
)
2302 int msix_intr_vect
= 0, temp
;
2306 /* Tx/Rx MSIX Vectors count */
2307 vdev
->intr_cnt
= vdev
->no_of_vpath
* 2;
2309 /* Alarm MSIX Vectors count */
2312 vdev
->entries
= kcalloc(vdev
->intr_cnt
, sizeof(struct msix_entry
),
2314 if (!vdev
->entries
) {
2315 vxge_debug_init(VXGE_ERR
,
2316 "%s: memory allocation failed",
2319 goto alloc_entries_failed
;
2322 vdev
->vxge_entries
= kcalloc(vdev
->intr_cnt
,
2323 sizeof(struct vxge_msix_entry
),
2325 if (!vdev
->vxge_entries
) {
2326 vxge_debug_init(VXGE_ERR
, "%s: memory allocation failed",
2329 goto alloc_vxge_entries_failed
;
2332 for (i
= 0, j
= 0; i
< vdev
->no_of_vpath
; i
++) {
2334 msix_intr_vect
= i
* VXGE_HW_VPATH_MSIX_ACTIVE
;
2336 /* Initialize the fifo vector */
2337 vdev
->entries
[j
].entry
= msix_intr_vect
;
2338 vdev
->vxge_entries
[j
].entry
= msix_intr_vect
;
2339 vdev
->vxge_entries
[j
].in_use
= 0;
2342 /* Initialize the ring vector */
2343 vdev
->entries
[j
].entry
= msix_intr_vect
+ 1;
2344 vdev
->vxge_entries
[j
].entry
= msix_intr_vect
+ 1;
2345 vdev
->vxge_entries
[j
].in_use
= 0;
2349 /* Initialize the alarm vector */
2350 vdev
->entries
[j
].entry
= VXGE_ALARM_MSIX_ID
;
2351 vdev
->vxge_entries
[j
].entry
= VXGE_ALARM_MSIX_ID
;
2352 vdev
->vxge_entries
[j
].in_use
= 0;
2354 ret
= pci_enable_msix(vdev
->pdev
, vdev
->entries
, vdev
->intr_cnt
);
2356 vxge_debug_init(VXGE_ERR
,
2357 "%s: MSI-X enable failed for %d vectors, ret: %d",
2358 VXGE_DRIVER_NAME
, vdev
->intr_cnt
, ret
);
2359 if ((max_config_vpath
!= VXGE_USE_DEFAULT
) || (ret
< 3)) {
2361 goto enable_msix_failed
;
2364 kfree(vdev
->entries
);
2365 kfree(vdev
->vxge_entries
);
2366 vdev
->entries
= NULL
;
2367 vdev
->vxge_entries
= NULL
;
2368 /* Try with less no of vector by reducing no of vpaths count */
2370 vxge_close_vpaths(vdev
, temp
);
2371 vdev
->no_of_vpath
= temp
;
2373 } else if (ret
< 0) {
2375 goto enable_msix_failed
;
2380 kfree(vdev
->vxge_entries
);
2381 alloc_vxge_entries_failed
:
2382 kfree(vdev
->entries
);
2383 alloc_entries_failed
:
2387 static int vxge_enable_msix(struct vxgedev
*vdev
)
2391 /* 0 - Tx, 1 - Rx */
2392 int tim_msix_id
[4] = {0, 1, 0, 0};
2396 /* allocate msix vectors */
2397 ret
= vxge_alloc_msix(vdev
);
2399 for (i
= 0; i
< vdev
->no_of_vpath
; i
++) {
2400 struct vxge_vpath
*vpath
= &vdev
->vpaths
[i
];
2402 /* If fifo or ring are not enabled, the MSIX vector for
2403 * it should be set to 0.
2405 vpath
->ring
.rx_vector_no
= (vpath
->device_id
*
2406 VXGE_HW_VPATH_MSIX_ACTIVE
) + 1;
2408 vpath
->fifo
.tx_vector_no
= (vpath
->device_id
*
2409 VXGE_HW_VPATH_MSIX_ACTIVE
);
2411 vxge_hw_vpath_msix_set(vpath
->handle
, tim_msix_id
,
2412 VXGE_ALARM_MSIX_ID
);
2419 static void vxge_rem_msix_isr(struct vxgedev
*vdev
)
2423 for (intr_cnt
= 0; intr_cnt
< (vdev
->no_of_vpath
* 2 + 1);
2425 if (vdev
->vxge_entries
[intr_cnt
].in_use
) {
2426 synchronize_irq(vdev
->entries
[intr_cnt
].vector
);
2427 free_irq(vdev
->entries
[intr_cnt
].vector
,
2428 vdev
->vxge_entries
[intr_cnt
].arg
);
2429 vdev
->vxge_entries
[intr_cnt
].in_use
= 0;
2433 kfree(vdev
->entries
);
2434 kfree(vdev
->vxge_entries
);
2435 vdev
->entries
= NULL
;
2436 vdev
->vxge_entries
= NULL
;
2438 if (vdev
->config
.intr_type
== MSI_X
)
2439 pci_disable_msix(vdev
->pdev
);
2443 static void vxge_rem_isr(struct vxgedev
*vdev
)
2445 struct __vxge_hw_device
*hldev
;
2446 hldev
= pci_get_drvdata(vdev
->pdev
);
2448 #ifdef CONFIG_PCI_MSI
2449 if (vdev
->config
.intr_type
== MSI_X
) {
2450 vxge_rem_msix_isr(vdev
);
2453 if (vdev
->config
.intr_type
== INTA
) {
2454 synchronize_irq(vdev
->pdev
->irq
);
2455 free_irq(vdev
->pdev
->irq
, vdev
);
2459 static int vxge_add_isr(struct vxgedev
*vdev
)
2462 #ifdef CONFIG_PCI_MSI
2463 int vp_idx
= 0, intr_idx
= 0, intr_cnt
= 0, msix_idx
= 0, irq_req
= 0;
2464 int pci_fun
= PCI_FUNC(vdev
->pdev
->devfn
);
2466 if (vdev
->config
.intr_type
== MSI_X
)
2467 ret
= vxge_enable_msix(vdev
);
2470 vxge_debug_init(VXGE_ERR
,
2471 "%s: Enabling MSI-X Failed", VXGE_DRIVER_NAME
);
2472 vxge_debug_init(VXGE_ERR
,
2473 "%s: Defaulting to INTA", VXGE_DRIVER_NAME
);
2474 vdev
->config
.intr_type
= INTA
;
2477 if (vdev
->config
.intr_type
== MSI_X
) {
2479 intr_idx
< (vdev
->no_of_vpath
*
2480 VXGE_HW_VPATH_MSIX_ACTIVE
); intr_idx
++) {
2482 msix_idx
= intr_idx
% VXGE_HW_VPATH_MSIX_ACTIVE
;
2487 snprintf(vdev
->desc
[intr_cnt
], VXGE_INTR_STRLEN
,
2488 "%s:vxge:MSI-X %d - Tx - fn:%d vpath:%d",
2490 vdev
->entries
[intr_cnt
].entry
,
2493 vdev
->entries
[intr_cnt
].vector
,
2494 vxge_tx_msix_handle
, 0,
2495 vdev
->desc
[intr_cnt
],
2496 &vdev
->vpaths
[vp_idx
].fifo
);
2497 vdev
->vxge_entries
[intr_cnt
].arg
=
2498 &vdev
->vpaths
[vp_idx
].fifo
;
2502 snprintf(vdev
->desc
[intr_cnt
], VXGE_INTR_STRLEN
,
2503 "%s:vxge:MSI-X %d - Rx - fn:%d vpath:%d",
2505 vdev
->entries
[intr_cnt
].entry
,
2508 vdev
->entries
[intr_cnt
].vector
,
2509 vxge_rx_msix_napi_handle
,
2511 vdev
->desc
[intr_cnt
],
2512 &vdev
->vpaths
[vp_idx
].ring
);
2513 vdev
->vxge_entries
[intr_cnt
].arg
=
2514 &vdev
->vpaths
[vp_idx
].ring
;
2520 vxge_debug_init(VXGE_ERR
,
2521 "%s: MSIX - %d Registration failed",
2522 vdev
->ndev
->name
, intr_cnt
);
2523 vxge_rem_msix_isr(vdev
);
2524 vdev
->config
.intr_type
= INTA
;
2525 vxge_debug_init(VXGE_ERR
,
2526 "%s: Defaulting to INTA"
2527 , vdev
->ndev
->name
);
2532 /* We requested for this msix interrupt */
2533 vdev
->vxge_entries
[intr_cnt
].in_use
= 1;
2534 msix_idx
+= vdev
->vpaths
[vp_idx
].device_id
*
2535 VXGE_HW_VPATH_MSIX_ACTIVE
;
2536 vxge_hw_vpath_msix_unmask(
2537 vdev
->vpaths
[vp_idx
].handle
,
2542 /* Point to next vpath handler */
2543 if (((intr_idx
+ 1) % VXGE_HW_VPATH_MSIX_ACTIVE
== 0) &&
2544 (vp_idx
< (vdev
->no_of_vpath
- 1)))
2548 intr_cnt
= vdev
->no_of_vpath
* 2;
2549 snprintf(vdev
->desc
[intr_cnt
], VXGE_INTR_STRLEN
,
2550 "%s:vxge:MSI-X %d - Alarm - fn:%d",
2552 vdev
->entries
[intr_cnt
].entry
,
2554 /* For Alarm interrupts */
2555 ret
= request_irq(vdev
->entries
[intr_cnt
].vector
,
2556 vxge_alarm_msix_handle
, 0,
2557 vdev
->desc
[intr_cnt
],
2560 vxge_debug_init(VXGE_ERR
,
2561 "%s: MSIX - %d Registration failed",
2562 vdev
->ndev
->name
, intr_cnt
);
2563 vxge_rem_msix_isr(vdev
);
2564 vdev
->config
.intr_type
= INTA
;
2565 vxge_debug_init(VXGE_ERR
,
2566 "%s: Defaulting to INTA",
2571 msix_idx
= (vdev
->vpaths
[0].handle
->vpath
->vp_id
*
2572 VXGE_HW_VPATH_MSIX_ACTIVE
) + VXGE_ALARM_MSIX_ID
;
2573 vxge_hw_vpath_msix_unmask(vdev
->vpaths
[vp_idx
].handle
,
2575 vdev
->vxge_entries
[intr_cnt
].in_use
= 1;
2576 vdev
->vxge_entries
[intr_cnt
].arg
= &vdev
->vpaths
[0];
2581 if (vdev
->config
.intr_type
== INTA
) {
2582 snprintf(vdev
->desc
[0], VXGE_INTR_STRLEN
,
2583 "%s:vxge:INTA", vdev
->ndev
->name
);
2584 vxge_hw_device_set_intr_type(vdev
->devh
,
2585 VXGE_HW_INTR_MODE_IRQLINE
);
2587 vxge_hw_vpath_tti_ci_set(vdev
->vpaths
[0].fifo
.handle
);
2589 ret
= request_irq((int) vdev
->pdev
->irq
,
2591 IRQF_SHARED
, vdev
->desc
[0], vdev
);
2593 vxge_debug_init(VXGE_ERR
,
2594 "%s %s-%d: ISR registration failed",
2595 VXGE_DRIVER_NAME
, "IRQ", vdev
->pdev
->irq
);
2598 vxge_debug_init(VXGE_TRACE
,
2599 "new %s-%d line allocated",
2600 "IRQ", vdev
->pdev
->irq
);
2606 static void vxge_poll_vp_reset(unsigned long data
)
2608 struct vxgedev
*vdev
= (struct vxgedev
*)data
;
2611 for (i
= 0; i
< vdev
->no_of_vpath
; i
++) {
2612 if (test_bit(i
, &vdev
->vp_reset
)) {
2613 vxge_reset_vpath(vdev
, i
);
2617 if (j
&& (vdev
->config
.intr_type
!= MSI_X
)) {
2618 vxge_hw_device_unmask_all(vdev
->devh
);
2619 vxge_hw_device_flush_io(vdev
->devh
);
2622 mod_timer(&vdev
->vp_reset_timer
, jiffies
+ HZ
/ 2);
2625 static void vxge_poll_vp_lockup(unsigned long data
)
2627 struct vxgedev
*vdev
= (struct vxgedev
*)data
;
2628 enum vxge_hw_status status
= VXGE_HW_OK
;
2629 struct vxge_vpath
*vpath
;
2630 struct vxge_ring
*ring
;
2633 for (i
= 0; i
< vdev
->no_of_vpath
; i
++) {
2634 ring
= &vdev
->vpaths
[i
].ring
;
2635 /* Did this vpath received any packets */
2636 if (ring
->stats
.prev_rx_frms
== ring
->stats
.rx_frms
) {
2637 status
= vxge_hw_vpath_check_leak(ring
->handle
);
2639 /* Did it received any packets last time */
2640 if ((VXGE_HW_FAIL
== status
) &&
2641 (VXGE_HW_FAIL
== ring
->last_status
)) {
2643 /* schedule vpath reset */
2644 if (!test_and_set_bit(i
, &vdev
->vp_reset
)) {
2645 vpath
= &vdev
->vpaths
[i
];
2647 /* disable interrupts for this vpath */
2648 vxge_vpath_intr_disable(vdev
, i
);
2650 /* stop the queue for this vpath */
2651 netif_tx_stop_queue(vpath
->fifo
.txq
);
2656 ring
->stats
.prev_rx_frms
= ring
->stats
.rx_frms
;
2657 ring
->last_status
= status
;
2660 /* Check every 1 milli second */
2661 mod_timer(&vdev
->vp_lockup_timer
, jiffies
+ HZ
/ 1000);
2664 static u32
vxge_fix_features(struct net_device
*dev
, u32 features
)
2666 u32 changed
= dev
->features
^ features
;
2668 /* Enabling RTH requires some of the logic in vxge_device_register and a
2669 * vpath reset. Due to these restrictions, only allow modification
2670 * while the interface is down.
2672 if ((changed
& NETIF_F_RXHASH
) && netif_running(dev
))
2673 features
^= NETIF_F_RXHASH
;
2678 static int vxge_set_features(struct net_device
*dev
, u32 features
)
2680 struct vxgedev
*vdev
= netdev_priv(dev
);
2681 u32 changed
= dev
->features
^ features
;
2683 if (!(changed
& NETIF_F_RXHASH
))
2686 /* !netif_running() ensured by vxge_fix_features() */
2688 vdev
->devh
->config
.rth_en
= !!(features
& NETIF_F_RXHASH
);
2689 if (vxge_reset_all_vpaths(vdev
) != VXGE_HW_OK
) {
2690 dev
->features
= features
^ NETIF_F_RXHASH
;
2691 vdev
->devh
->config
.rth_en
= !!(dev
->features
& NETIF_F_RXHASH
);
2700 * @dev: pointer to the device structure.
2702 * This function is the open entry point of the driver. It mainly calls a
2703 * function to allocate Rx buffers and inserts them into the buffer
2704 * descriptors and then enables the Rx part of the NIC.
2705 * Return value: '0' on success and an appropriate (-)ve integer as
2706 * defined in errno.h file on failure.
2708 static int vxge_open(struct net_device
*dev
)
2710 enum vxge_hw_status status
;
2711 struct vxgedev
*vdev
;
2712 struct __vxge_hw_device
*hldev
;
2713 struct vxge_vpath
*vpath
;
2716 u64 val64
, function_mode
;
2718 vxge_debug_entryexit(VXGE_TRACE
,
2719 "%s: %s:%d", dev
->name
, __func__
, __LINE__
);
2721 vdev
= netdev_priv(dev
);
2722 hldev
= pci_get_drvdata(vdev
->pdev
);
2723 function_mode
= vdev
->config
.device_hw_info
.function_mode
;
2725 /* make sure you have link off by default every time Nic is
2727 netif_carrier_off(dev
);
2730 status
= vxge_open_vpaths(vdev
);
2731 if (status
!= VXGE_HW_OK
) {
2732 vxge_debug_init(VXGE_ERR
,
2733 "%s: fatal: Vpath open failed", vdev
->ndev
->name
);
2738 vdev
->mtu
= dev
->mtu
;
2740 status
= vxge_add_isr(vdev
);
2741 if (status
!= VXGE_HW_OK
) {
2742 vxge_debug_init(VXGE_ERR
,
2743 "%s: fatal: ISR add failed", dev
->name
);
2748 if (vdev
->config
.intr_type
!= MSI_X
) {
2749 netif_napi_add(dev
, &vdev
->napi
, vxge_poll_inta
,
2750 vdev
->config
.napi_weight
);
2751 napi_enable(&vdev
->napi
);
2752 for (i
= 0; i
< vdev
->no_of_vpath
; i
++) {
2753 vpath
= &vdev
->vpaths
[i
];
2754 vpath
->ring
.napi_p
= &vdev
->napi
;
2757 for (i
= 0; i
< vdev
->no_of_vpath
; i
++) {
2758 vpath
= &vdev
->vpaths
[i
];
2759 netif_napi_add(dev
, &vpath
->ring
.napi
,
2760 vxge_poll_msix
, vdev
->config
.napi_weight
);
2761 napi_enable(&vpath
->ring
.napi
);
2762 vpath
->ring
.napi_p
= &vpath
->ring
.napi
;
2767 if (vdev
->config
.rth_steering
) {
2768 status
= vxge_rth_configure(vdev
);
2769 if (status
!= VXGE_HW_OK
) {
2770 vxge_debug_init(VXGE_ERR
,
2771 "%s: fatal: RTH configuration failed",
2777 printk(KERN_INFO
"%s: Receive Hashing Offload %s\n", dev
->name
,
2778 hldev
->config
.rth_en
? "enabled" : "disabled");
2780 for (i
= 0; i
< vdev
->no_of_vpath
; i
++) {
2781 vpath
= &vdev
->vpaths
[i
];
2783 /* set initial mtu before enabling the device */
2784 status
= vxge_hw_vpath_mtu_set(vpath
->handle
, vdev
->mtu
);
2785 if (status
!= VXGE_HW_OK
) {
2786 vxge_debug_init(VXGE_ERR
,
2787 "%s: fatal: can not set new MTU", dev
->name
);
2793 VXGE_DEVICE_DEBUG_LEVEL_SET(VXGE_TRACE
, VXGE_COMPONENT_LL
, vdev
);
2794 vxge_debug_init(vdev
->level_trace
,
2795 "%s: MTU is %d", vdev
->ndev
->name
, vdev
->mtu
);
2796 VXGE_DEVICE_DEBUG_LEVEL_SET(VXGE_ERR
, VXGE_COMPONENT_LL
, vdev
);
2798 /* Restore the DA, VID table and also multicast and promiscuous mode
2801 if (vdev
->all_multi_flg
) {
2802 for (i
= 0; i
< vdev
->no_of_vpath
; i
++) {
2803 vpath
= &vdev
->vpaths
[i
];
2804 vxge_restore_vpath_mac_addr(vpath
);
2805 vxge_restore_vpath_vid_table(vpath
);
2807 status
= vxge_hw_vpath_mcast_enable(vpath
->handle
);
2808 if (status
!= VXGE_HW_OK
)
2809 vxge_debug_init(VXGE_ERR
,
2810 "%s:%d Enabling multicast failed",
2811 __func__
, __LINE__
);
2815 /* Enable vpath to sniff all unicast/multicast traffic that not
2816 * addressed to them. We allow promiscuous mode for PF only
2820 for (i
= 0; i
< VXGE_HW_MAX_VIRTUAL_PATHS
; i
++)
2821 val64
|= VXGE_HW_RXMAC_AUTHORIZE_ALL_ADDR_VP(i
);
2823 vxge_hw_mgmt_reg_write(vdev
->devh
,
2824 vxge_hw_mgmt_reg_type_mrpcim
,
2826 (ulong
)offsetof(struct vxge_hw_mrpcim_reg
,
2827 rxmac_authorize_all_addr
),
2830 vxge_hw_mgmt_reg_write(vdev
->devh
,
2831 vxge_hw_mgmt_reg_type_mrpcim
,
2833 (ulong
)offsetof(struct vxge_hw_mrpcim_reg
,
2834 rxmac_authorize_all_vid
),
2837 vxge_set_multicast(dev
);
2839 /* Enabling Bcast and mcast for all vpath */
2840 for (i
= 0; i
< vdev
->no_of_vpath
; i
++) {
2841 vpath
= &vdev
->vpaths
[i
];
2842 status
= vxge_hw_vpath_bcast_enable(vpath
->handle
);
2843 if (status
!= VXGE_HW_OK
)
2844 vxge_debug_init(VXGE_ERR
,
2845 "%s : Can not enable bcast for vpath "
2846 "id %d", dev
->name
, i
);
2847 if (vdev
->config
.addr_learn_en
) {
2848 status
= vxge_hw_vpath_mcast_enable(vpath
->handle
);
2849 if (status
!= VXGE_HW_OK
)
2850 vxge_debug_init(VXGE_ERR
,
2851 "%s : Can not enable mcast for vpath "
2852 "id %d", dev
->name
, i
);
2856 vxge_hw_device_setpause_data(vdev
->devh
, 0,
2857 vdev
->config
.tx_pause_enable
,
2858 vdev
->config
.rx_pause_enable
);
2860 if (vdev
->vp_reset_timer
.function
== NULL
)
2861 vxge_os_timer(vdev
->vp_reset_timer
,
2862 vxge_poll_vp_reset
, vdev
, (HZ
/2));
2864 /* There is no need to check for RxD leak and RxD lookup on Titan1A */
2865 if (vdev
->titan1
&& vdev
->vp_lockup_timer
.function
== NULL
)
2866 vxge_os_timer(vdev
->vp_lockup_timer
, vxge_poll_vp_lockup
, vdev
,
2869 set_bit(__VXGE_STATE_CARD_UP
, &vdev
->state
);
2873 if (vxge_hw_device_link_state_get(vdev
->devh
) == VXGE_HW_LINK_UP
) {
2874 netif_carrier_on(vdev
->ndev
);
2875 netdev_notice(vdev
->ndev
, "Link Up\n");
2876 vdev
->stats
.link_up
++;
2879 vxge_hw_device_intr_enable(vdev
->devh
);
2883 for (i
= 0; i
< vdev
->no_of_vpath
; i
++) {
2884 vpath
= &vdev
->vpaths
[i
];
2886 vxge_hw_vpath_enable(vpath
->handle
);
2888 vxge_hw_vpath_rx_doorbell_init(vpath
->handle
);
2891 netif_tx_start_all_queues(vdev
->ndev
);
2894 vxge_config_ci_for_tti_rti(vdev
);
2902 if (vdev
->config
.intr_type
!= MSI_X
)
2903 napi_disable(&vdev
->napi
);
2905 for (i
= 0; i
< vdev
->no_of_vpath
; i
++)
2906 napi_disable(&vdev
->vpaths
[i
].ring
.napi
);
2910 vxge_close_vpaths(vdev
, 0);
2912 vxge_debug_entryexit(VXGE_TRACE
,
2913 "%s: %s:%d Exiting...",
2914 dev
->name
, __func__
, __LINE__
);
2918 /* Loop through the mac address list and delete all the entries */
2919 static void vxge_free_mac_add_list(struct vxge_vpath
*vpath
)
2922 struct list_head
*entry
, *next
;
2923 if (list_empty(&vpath
->mac_addr_list
))
2926 list_for_each_safe(entry
, next
, &vpath
->mac_addr_list
) {
2928 kfree((struct vxge_mac_addrs
*)entry
);
2932 static void vxge_napi_del_all(struct vxgedev
*vdev
)
2935 if (vdev
->config
.intr_type
!= MSI_X
)
2936 netif_napi_del(&vdev
->napi
);
2938 for (i
= 0; i
< vdev
->no_of_vpath
; i
++)
2939 netif_napi_del(&vdev
->vpaths
[i
].ring
.napi
);
2943 static int do_vxge_close(struct net_device
*dev
, int do_io
)
2945 enum vxge_hw_status status
;
2946 struct vxgedev
*vdev
;
2947 struct __vxge_hw_device
*hldev
;
2949 u64 val64
, vpath_vector
;
2950 vxge_debug_entryexit(VXGE_TRACE
, "%s: %s:%d",
2951 dev
->name
, __func__
, __LINE__
);
2953 vdev
= netdev_priv(dev
);
2954 hldev
= pci_get_drvdata(vdev
->pdev
);
2956 if (unlikely(!is_vxge_card_up(vdev
)))
2959 /* If vxge_handle_crit_err task is executing,
2960 * wait till it completes. */
2961 while (test_and_set_bit(__VXGE_STATE_RESET_CARD
, &vdev
->state
))
2965 /* Put the vpath back in normal mode */
2966 vpath_vector
= vxge_mBIT(vdev
->vpaths
[0].device_id
);
2967 status
= vxge_hw_mgmt_reg_read(vdev
->devh
,
2968 vxge_hw_mgmt_reg_type_mrpcim
,
2971 struct vxge_hw_mrpcim_reg
,
2972 rts_mgr_cbasin_cfg
),
2974 if (status
== VXGE_HW_OK
) {
2975 val64
&= ~vpath_vector
;
2976 status
= vxge_hw_mgmt_reg_write(vdev
->devh
,
2977 vxge_hw_mgmt_reg_type_mrpcim
,
2980 struct vxge_hw_mrpcim_reg
,
2981 rts_mgr_cbasin_cfg
),
2985 /* Remove the function 0 from promiscuous mode */
2986 vxge_hw_mgmt_reg_write(vdev
->devh
,
2987 vxge_hw_mgmt_reg_type_mrpcim
,
2989 (ulong
)offsetof(struct vxge_hw_mrpcim_reg
,
2990 rxmac_authorize_all_addr
),
2993 vxge_hw_mgmt_reg_write(vdev
->devh
,
2994 vxge_hw_mgmt_reg_type_mrpcim
,
2996 (ulong
)offsetof(struct vxge_hw_mrpcim_reg
,
2997 rxmac_authorize_all_vid
),
3004 del_timer_sync(&vdev
->vp_lockup_timer
);
3006 del_timer_sync(&vdev
->vp_reset_timer
);
3009 vxge_hw_device_wait_receive_idle(hldev
);
3011 clear_bit(__VXGE_STATE_CARD_UP
, &vdev
->state
);
3014 if (vdev
->config
.intr_type
!= MSI_X
)
3015 napi_disable(&vdev
->napi
);
3017 for (i
= 0; i
< vdev
->no_of_vpath
; i
++)
3018 napi_disable(&vdev
->vpaths
[i
].ring
.napi
);
3021 netif_carrier_off(vdev
->ndev
);
3022 netdev_notice(vdev
->ndev
, "Link Down\n");
3023 netif_tx_stop_all_queues(vdev
->ndev
);
3025 /* Note that at this point xmit() is stopped by upper layer */
3027 vxge_hw_device_intr_disable(vdev
->devh
);
3031 vxge_napi_del_all(vdev
);
3034 vxge_reset_all_vpaths(vdev
);
3036 vxge_close_vpaths(vdev
, 0);
3038 vxge_debug_entryexit(VXGE_TRACE
,
3039 "%s: %s:%d Exiting...", dev
->name
, __func__
, __LINE__
);
3041 clear_bit(__VXGE_STATE_RESET_CARD
, &vdev
->state
);
3048 * @dev: device pointer.
3050 * This is the stop entry point of the driver. It needs to undo exactly
3051 * whatever was done by the open entry point, thus it's usually referred to
3052 * as the close function.Among other things this function mainly stops the
3053 * Rx side of the NIC and frees all the Rx buffers in the Rx rings.
3054 * Return value: '0' on success and an appropriate (-)ve integer as
3055 * defined in errno.h file on failure.
3057 static int vxge_close(struct net_device
*dev
)
3059 do_vxge_close(dev
, 1);
3065 * @dev: net device pointer.
3066 * @new_mtu :the new MTU size for the device.
3068 * A driver entry point to change MTU size for the device. Before changing
3069 * the MTU the device must be stopped.
3071 static int vxge_change_mtu(struct net_device
*dev
, int new_mtu
)
3073 struct vxgedev
*vdev
= netdev_priv(dev
);
3075 vxge_debug_entryexit(vdev
->level_trace
,
3076 "%s:%d", __func__
, __LINE__
);
3077 if ((new_mtu
< VXGE_HW_MIN_MTU
) || (new_mtu
> VXGE_HW_MAX_MTU
)) {
3078 vxge_debug_init(vdev
->level_err
,
3079 "%s: mtu size is invalid", dev
->name
);
3083 /* check if device is down already */
3084 if (unlikely(!is_vxge_card_up(vdev
))) {
3085 /* just store new value, will use later on open() */
3087 vxge_debug_init(vdev
->level_err
,
3088 "%s", "device is down on MTU change");
3092 vxge_debug_init(vdev
->level_trace
,
3093 "trying to apply new MTU %d", new_mtu
);
3095 if (vxge_close(dev
))
3099 vdev
->mtu
= new_mtu
;
3104 vxge_debug_init(vdev
->level_trace
,
3105 "%s: MTU changed to %d", vdev
->ndev
->name
, new_mtu
);
3107 vxge_debug_entryexit(vdev
->level_trace
,
3108 "%s:%d Exiting...", __func__
, __LINE__
);
3115 * @dev: pointer to the device structure
3116 * @stats: pointer to struct rtnl_link_stats64
3119 static struct rtnl_link_stats64
*
3120 vxge_get_stats64(struct net_device
*dev
, struct rtnl_link_stats64
*net_stats
)
3122 struct vxgedev
*vdev
= netdev_priv(dev
);
3125 /* net_stats already zeroed by caller */
3126 for (k
= 0; k
< vdev
->no_of_vpath
; k
++) {
3127 net_stats
->rx_packets
+= vdev
->vpaths
[k
].ring
.stats
.rx_frms
;
3128 net_stats
->rx_bytes
+= vdev
->vpaths
[k
].ring
.stats
.rx_bytes
;
3129 net_stats
->rx_errors
+= vdev
->vpaths
[k
].ring
.stats
.rx_errors
;
3130 net_stats
->multicast
+= vdev
->vpaths
[k
].ring
.stats
.rx_mcast
;
3131 net_stats
->rx_dropped
+= vdev
->vpaths
[k
].ring
.stats
.rx_dropped
;
3132 net_stats
->tx_packets
+= vdev
->vpaths
[k
].fifo
.stats
.tx_frms
;
3133 net_stats
->tx_bytes
+= vdev
->vpaths
[k
].fifo
.stats
.tx_bytes
;
3134 net_stats
->tx_errors
+= vdev
->vpaths
[k
].fifo
.stats
.tx_errors
;
3140 static enum vxge_hw_status
vxge_timestamp_config(struct __vxge_hw_device
*devh
)
3142 enum vxge_hw_status status
;
3145 /* Timestamp is passed to the driver via the FCS, therefore we
3146 * must disable the FCS stripping by the adapter. Since this is
3147 * required for the driver to load (due to a hardware bug),
3148 * there is no need to do anything special here.
3150 val64
= VXGE_HW_XMAC_TIMESTAMP_EN
|
3151 VXGE_HW_XMAC_TIMESTAMP_USE_LINK_ID(0) |
3152 VXGE_HW_XMAC_TIMESTAMP_INTERVAL(0);
3154 status
= vxge_hw_mgmt_reg_write(devh
,
3155 vxge_hw_mgmt_reg_type_mrpcim
,
3157 offsetof(struct vxge_hw_mrpcim_reg
,
3160 vxge_hw_device_flush_io(devh
);
3161 devh
->config
.hwts_en
= VXGE_HW_HWTS_ENABLE
;
3165 static int vxge_hwtstamp_ioctl(struct vxgedev
*vdev
, void __user
*data
)
3167 struct hwtstamp_config config
;
3170 if (copy_from_user(&config
, data
, sizeof(config
)))
3173 /* reserved for future extensions */
3177 /* Transmit HW Timestamp not supported */
3178 switch (config
.tx_type
) {
3179 case HWTSTAMP_TX_OFF
:
3181 case HWTSTAMP_TX_ON
:
3186 switch (config
.rx_filter
) {
3187 case HWTSTAMP_FILTER_NONE
:
3189 config
.rx_filter
= HWTSTAMP_FILTER_NONE
;
3192 case HWTSTAMP_FILTER_ALL
:
3193 case HWTSTAMP_FILTER_SOME
:
3194 case HWTSTAMP_FILTER_PTP_V1_L4_EVENT
:
3195 case HWTSTAMP_FILTER_PTP_V1_L4_SYNC
:
3196 case HWTSTAMP_FILTER_PTP_V1_L4_DELAY_REQ
:
3197 case HWTSTAMP_FILTER_PTP_V2_L4_EVENT
:
3198 case HWTSTAMP_FILTER_PTP_V2_L4_SYNC
:
3199 case HWTSTAMP_FILTER_PTP_V2_L4_DELAY_REQ
:
3200 case HWTSTAMP_FILTER_PTP_V2_L2_EVENT
:
3201 case HWTSTAMP_FILTER_PTP_V2_L2_SYNC
:
3202 case HWTSTAMP_FILTER_PTP_V2_L2_DELAY_REQ
:
3203 case HWTSTAMP_FILTER_PTP_V2_EVENT
:
3204 case HWTSTAMP_FILTER_PTP_V2_SYNC
:
3205 case HWTSTAMP_FILTER_PTP_V2_DELAY_REQ
:
3206 if (vdev
->devh
->config
.hwts_en
!= VXGE_HW_HWTS_ENABLE
)
3210 config
.rx_filter
= HWTSTAMP_FILTER_ALL
;
3217 for (i
= 0; i
< vdev
->no_of_vpath
; i
++)
3218 vdev
->vpaths
[i
].ring
.rx_hwts
= vdev
->rx_hwts
;
3220 if (copy_to_user(data
, &config
, sizeof(config
)))
3228 * @dev: Device pointer.
3229 * @ifr: An IOCTL specific structure, that can contain a pointer to
3230 * a proprietary structure used to pass information to the driver.
3231 * @cmd: This is used to distinguish between the different commands that
3232 * can be passed to the IOCTL functions.
3234 * Entry point for the Ioctl.
3236 static int vxge_ioctl(struct net_device
*dev
, struct ifreq
*rq
, int cmd
)
3238 struct vxgedev
*vdev
= netdev_priv(dev
);
3243 ret
= vxge_hwtstamp_ioctl(vdev
, rq
->ifr_data
);
3256 * @dev: pointer to net device structure
3258 * Watchdog for transmit side.
3259 * This function is triggered if the Tx Queue is stopped
3260 * for a pre-defined amount of time when the Interface is still up.
3262 static void vxge_tx_watchdog(struct net_device
*dev
)
3264 struct vxgedev
*vdev
;
3266 vxge_debug_entryexit(VXGE_TRACE
, "%s:%d", __func__
, __LINE__
);
3268 vdev
= netdev_priv(dev
);
3270 vdev
->cric_err_event
= VXGE_HW_EVENT_RESET_START
;
3272 schedule_work(&vdev
->reset_task
);
3273 vxge_debug_entryexit(VXGE_TRACE
,
3274 "%s:%d Exiting...", __func__
, __LINE__
);
3278 * vxge_vlan_rx_register
3279 * @dev: net device pointer.
3282 * Vlan group registration
3285 vxge_vlan_rx_register(struct net_device
*dev
, struct vlan_group
*grp
)
3287 struct vxgedev
*vdev
;
3288 struct vxge_vpath
*vpath
;
3291 enum vxge_hw_status status
;
3294 vxge_debug_entryexit(VXGE_TRACE
, "%s:%d", __func__
, __LINE__
);
3296 vdev
= netdev_priv(dev
);
3298 vpath
= &vdev
->vpaths
[0];
3299 if ((NULL
== grp
) && (vpath
->is_open
)) {
3300 /* Get the first vlan */
3301 status
= vxge_hw_vpath_vid_get(vpath
->handle
, &vid
);
3303 while (status
== VXGE_HW_OK
) {
3305 /* Delete this vlan from the vid table */
3306 for (vp
= 0; vp
< vdev
->no_of_vpath
; vp
++) {
3307 vpath
= &vdev
->vpaths
[vp
];
3308 if (!vpath
->is_open
)
3311 vxge_hw_vpath_vid_delete(vpath
->handle
, vid
);
3314 /* Get the next vlan to be deleted */
3315 vpath
= &vdev
->vpaths
[0];
3316 status
= vxge_hw_vpath_vid_get(vpath
->handle
, &vid
);
3322 for (i
= 0; i
< vdev
->no_of_vpath
; i
++) {
3323 if (vdev
->vpaths
[i
].is_configured
)
3324 vdev
->vpaths
[i
].ring
.vlgrp
= grp
;
3327 vxge_debug_entryexit(VXGE_TRACE
,
3328 "%s:%d Exiting...", __func__
, __LINE__
);
3332 * vxge_vlan_rx_add_vid
3333 * @dev: net device pointer.
3336 * Add the vlan id to the devices vlan id table
3339 vxge_vlan_rx_add_vid(struct net_device
*dev
, unsigned short vid
)
3341 struct vxgedev
*vdev
;
3342 struct vxge_vpath
*vpath
;
3345 vdev
= netdev_priv(dev
);
3347 /* Add these vlan to the vid table */
3348 for (vp_id
= 0; vp_id
< vdev
->no_of_vpath
; vp_id
++) {
3349 vpath
= &vdev
->vpaths
[vp_id
];
3350 if (!vpath
->is_open
)
3352 vxge_hw_vpath_vid_add(vpath
->handle
, vid
);
3357 * vxge_vlan_rx_add_vid
3358 * @dev: net device pointer.
3361 * Remove the vlan id from the device's vlan id table
3364 vxge_vlan_rx_kill_vid(struct net_device
*dev
, unsigned short vid
)
3366 struct vxgedev
*vdev
;
3367 struct vxge_vpath
*vpath
;
3370 vxge_debug_entryexit(VXGE_TRACE
, "%s:%d", __func__
, __LINE__
);
3372 vdev
= netdev_priv(dev
);
3374 vlan_group_set_device(vdev
->vlgrp
, vid
, NULL
);
3376 /* Delete this vlan from the vid table */
3377 for (vp_id
= 0; vp_id
< vdev
->no_of_vpath
; vp_id
++) {
3378 vpath
= &vdev
->vpaths
[vp_id
];
3379 if (!vpath
->is_open
)
3381 vxge_hw_vpath_vid_delete(vpath
->handle
, vid
);
3383 vxge_debug_entryexit(VXGE_TRACE
,
3384 "%s:%d Exiting...", __func__
, __LINE__
);
3387 static const struct net_device_ops vxge_netdev_ops
= {
3388 .ndo_open
= vxge_open
,
3389 .ndo_stop
= vxge_close
,
3390 .ndo_get_stats64
= vxge_get_stats64
,
3391 .ndo_start_xmit
= vxge_xmit
,
3392 .ndo_validate_addr
= eth_validate_addr
,
3393 .ndo_set_multicast_list
= vxge_set_multicast
,
3394 .ndo_do_ioctl
= vxge_ioctl
,
3395 .ndo_set_mac_address
= vxge_set_mac_addr
,
3396 .ndo_change_mtu
= vxge_change_mtu
,
3397 .ndo_fix_features
= vxge_fix_features
,
3398 .ndo_set_features
= vxge_set_features
,
3399 .ndo_vlan_rx_register
= vxge_vlan_rx_register
,
3400 .ndo_vlan_rx_kill_vid
= vxge_vlan_rx_kill_vid
,
3401 .ndo_vlan_rx_add_vid
= vxge_vlan_rx_add_vid
,
3402 .ndo_tx_timeout
= vxge_tx_watchdog
,
3403 #ifdef CONFIG_NET_POLL_CONTROLLER
3404 .ndo_poll_controller
= vxge_netpoll
,
3408 static int __devinit
vxge_device_register(struct __vxge_hw_device
*hldev
,
3409 struct vxge_config
*config
,
3410 int high_dma
, int no_of_vpath
,
3411 struct vxgedev
**vdev_out
)
3413 struct net_device
*ndev
;
3414 enum vxge_hw_status status
= VXGE_HW_OK
;
3415 struct vxgedev
*vdev
;
3416 int ret
= 0, no_of_queue
= 1;
3420 if (config
->tx_steering_type
)
3421 no_of_queue
= no_of_vpath
;
3423 ndev
= alloc_etherdev_mq(sizeof(struct vxgedev
),
3427 vxge_hw_device_trace_level_get(hldev
),
3428 "%s : device allocation failed", __func__
);
3433 vxge_debug_entryexit(
3434 vxge_hw_device_trace_level_get(hldev
),
3435 "%s: %s:%d Entering...",
3436 ndev
->name
, __func__
, __LINE__
);
3438 vdev
= netdev_priv(ndev
);
3439 memset(vdev
, 0, sizeof(struct vxgedev
));
3443 vdev
->pdev
= hldev
->pdev
;
3444 memcpy(&vdev
->config
, config
, sizeof(struct vxge_config
));
3446 vdev
->titan1
= (vdev
->pdev
->revision
== VXGE_HW_TITAN1_PCI_REVISION
);
3448 SET_NETDEV_DEV(ndev
, &vdev
->pdev
->dev
);
3450 ndev
->hw_features
= NETIF_F_RXCSUM
| NETIF_F_SG
|
3451 NETIF_F_IP_CSUM
| NETIF_F_IPV6_CSUM
|
3452 NETIF_F_TSO
| NETIF_F_TSO6
|
3454 if (vdev
->config
.rth_steering
!= NO_STEERING
)
3455 ndev
->hw_features
|= NETIF_F_RXHASH
;
3457 ndev
->features
|= ndev
->hw_features
|
3458 NETIF_F_HW_VLAN_RX
| NETIF_F_HW_VLAN_FILTER
;
3460 /* Driver entry points */
3461 ndev
->irq
= vdev
->pdev
->irq
;
3462 ndev
->base_addr
= (unsigned long) hldev
->bar0
;
3464 ndev
->netdev_ops
= &vxge_netdev_ops
;
3466 ndev
->watchdog_timeo
= VXGE_LL_WATCH_DOG_TIMEOUT
;
3467 INIT_WORK(&vdev
->reset_task
, vxge_reset
);
3469 vxge_initialize_ethtool_ops(ndev
);
3471 /* Allocate memory for vpath */
3472 vdev
->vpaths
= kzalloc((sizeof(struct vxge_vpath
)) *
3473 no_of_vpath
, GFP_KERNEL
);
3474 if (!vdev
->vpaths
) {
3475 vxge_debug_init(VXGE_ERR
,
3476 "%s: vpath memory allocation failed",
3482 vxge_debug_init(vxge_hw_device_trace_level_get(hldev
),
3483 "%s : checksuming enabled", __func__
);
3486 ndev
->features
|= NETIF_F_HIGHDMA
;
3487 vxge_debug_init(vxge_hw_device_trace_level_get(hldev
),
3488 "%s : using High DMA", __func__
);
3491 ret
= register_netdev(ndev
);
3493 vxge_debug_init(vxge_hw_device_trace_level_get(hldev
),
3494 "%s: %s : device registration failed!",
3495 ndev
->name
, __func__
);
3499 /* Set the factory defined MAC address initially */
3500 ndev
->addr_len
= ETH_ALEN
;
3502 /* Make Link state as off at this point, when the Link change
3503 * interrupt comes the state will be automatically changed to
3506 netif_carrier_off(ndev
);
3508 vxge_debug_init(vxge_hw_device_trace_level_get(hldev
),
3509 "%s: Ethernet device registered",
3515 /* Resetting the Device stats */
3516 status
= vxge_hw_mrpcim_stats_access(
3518 VXGE_HW_STATS_OP_CLEAR_ALL_STATS
,
3523 if (status
== VXGE_HW_ERR_PRIVILAGED_OPEARATION
)
3525 vxge_hw_device_trace_level_get(hldev
),
3526 "%s: device stats clear returns"
3527 "VXGE_HW_ERR_PRIVILAGED_OPEARATION", ndev
->name
);
3529 vxge_debug_entryexit(vxge_hw_device_trace_level_get(hldev
),
3530 "%s: %s:%d Exiting...",
3531 ndev
->name
, __func__
, __LINE__
);
3535 kfree(vdev
->vpaths
);
3543 * vxge_device_unregister
3545 * This function will unregister and free network device
3547 static void vxge_device_unregister(struct __vxge_hw_device
*hldev
)
3549 struct vxgedev
*vdev
;
3550 struct net_device
*dev
;
3554 vdev
= netdev_priv(dev
);
3556 vxge_debug_entryexit(vdev
->level_trace
, "%s: %s:%d", vdev
->ndev
->name
,
3557 __func__
, __LINE__
);
3559 strncpy(buf
, dev
->name
, IFNAMSIZ
);
3561 flush_work_sync(&vdev
->reset_task
);
3563 /* in 2.6 will call stop() if device is up */
3564 unregister_netdev(dev
);
3566 kfree(vdev
->vpaths
);
3568 /* we are safe to free it now */
3571 vxge_debug_init(vdev
->level_trace
, "%s: ethernet device unregistered",
3573 vxge_debug_entryexit(vdev
->level_trace
, "%s: %s:%d Exiting...", buf
,
3574 __func__
, __LINE__
);
3578 * vxge_callback_crit_err
3580 * This function is called by the alarm handler in interrupt context.
3581 * Driver must analyze it based on the event type.
3584 vxge_callback_crit_err(struct __vxge_hw_device
*hldev
,
3585 enum vxge_hw_event type
, u64 vp_id
)
3587 struct net_device
*dev
= hldev
->ndev
;
3588 struct vxgedev
*vdev
= netdev_priv(dev
);
3589 struct vxge_vpath
*vpath
= NULL
;
3592 vxge_debug_entryexit(vdev
->level_trace
,
3593 "%s: %s:%d", vdev
->ndev
->name
, __func__
, __LINE__
);
3595 /* Note: This event type should be used for device wide
3596 * indications only - Serious errors, Slot freeze and critical errors
3598 vdev
->cric_err_event
= type
;
3600 for (vpath_idx
= 0; vpath_idx
< vdev
->no_of_vpath
; vpath_idx
++) {
3601 vpath
= &vdev
->vpaths
[vpath_idx
];
3602 if (vpath
->device_id
== vp_id
)
3606 if (!test_bit(__VXGE_STATE_RESET_CARD
, &vdev
->state
)) {
3607 if (type
== VXGE_HW_EVENT_SLOT_FREEZE
) {
3608 vxge_debug_init(VXGE_ERR
,
3609 "%s: Slot is frozen", vdev
->ndev
->name
);
3610 } else if (type
== VXGE_HW_EVENT_SERR
) {
3611 vxge_debug_init(VXGE_ERR
,
3612 "%s: Encountered Serious Error",
3614 } else if (type
== VXGE_HW_EVENT_CRITICAL_ERR
)
3615 vxge_debug_init(VXGE_ERR
,
3616 "%s: Encountered Critical Error",
3620 if ((type
== VXGE_HW_EVENT_SERR
) ||
3621 (type
== VXGE_HW_EVENT_SLOT_FREEZE
)) {
3622 if (unlikely(vdev
->exec_mode
))
3623 clear_bit(__VXGE_STATE_CARD_UP
, &vdev
->state
);
3624 } else if (type
== VXGE_HW_EVENT_CRITICAL_ERR
) {
3625 vxge_hw_device_mask_all(hldev
);
3626 if (unlikely(vdev
->exec_mode
))
3627 clear_bit(__VXGE_STATE_CARD_UP
, &vdev
->state
);
3628 } else if ((type
== VXGE_HW_EVENT_FIFO_ERR
) ||
3629 (type
== VXGE_HW_EVENT_VPATH_ERR
)) {
3631 if (unlikely(vdev
->exec_mode
))
3632 clear_bit(__VXGE_STATE_CARD_UP
, &vdev
->state
);
3634 /* check if this vpath is already set for reset */
3635 if (!test_and_set_bit(vpath_idx
, &vdev
->vp_reset
)) {
3637 /* disable interrupts for this vpath */
3638 vxge_vpath_intr_disable(vdev
, vpath_idx
);
3640 /* stop the queue for this vpath */
3641 netif_tx_stop_queue(vpath
->fifo
.txq
);
3646 vxge_debug_entryexit(vdev
->level_trace
,
3647 "%s: %s:%d Exiting...",
3648 vdev
->ndev
->name
, __func__
, __LINE__
);
3651 static void verify_bandwidth(void)
3653 int i
, band_width
, total
= 0, equal_priority
= 0;
3655 /* 1. If user enters 0 for some fifo, give equal priority to all */
3656 for (i
= 0; i
< VXGE_HW_MAX_VIRTUAL_PATHS
; i
++) {
3657 if (bw_percentage
[i
] == 0) {
3663 if (!equal_priority
) {
3664 /* 2. If sum exceeds 100, give equal priority to all */
3665 for (i
= 0; i
< VXGE_HW_MAX_VIRTUAL_PATHS
; i
++) {
3666 if (bw_percentage
[i
] == 0xFF)
3669 total
+= bw_percentage
[i
];
3670 if (total
> VXGE_HW_VPATH_BANDWIDTH_MAX
) {
3677 if (!equal_priority
) {
3678 /* Is all the bandwidth consumed? */
3679 if (total
< VXGE_HW_VPATH_BANDWIDTH_MAX
) {
3680 if (i
< VXGE_HW_MAX_VIRTUAL_PATHS
) {
3681 /* Split rest of bw equally among next VPs*/
3683 (VXGE_HW_VPATH_BANDWIDTH_MAX
- total
) /
3684 (VXGE_HW_MAX_VIRTUAL_PATHS
- i
);
3685 if (band_width
< 2) /* min of 2% */
3688 for (; i
< VXGE_HW_MAX_VIRTUAL_PATHS
;
3694 } else if (i
< VXGE_HW_MAX_VIRTUAL_PATHS
)
3698 if (equal_priority
) {
3699 vxge_debug_init(VXGE_ERR
,
3700 "%s: Assigning equal bandwidth to all the vpaths",
3702 bw_percentage
[0] = VXGE_HW_VPATH_BANDWIDTH_MAX
/
3703 VXGE_HW_MAX_VIRTUAL_PATHS
;
3704 for (i
= 1; i
< VXGE_HW_MAX_VIRTUAL_PATHS
; i
++)
3705 bw_percentage
[i
] = bw_percentage
[0];
3710 * Vpath configuration
3712 static int __devinit
vxge_config_vpaths(
3713 struct vxge_hw_device_config
*device_config
,
3714 u64 vpath_mask
, struct vxge_config
*config_param
)
3716 int i
, no_of_vpaths
= 0, default_no_vpath
= 0, temp
;
3717 u32 txdl_size
, txdl_per_memblock
;
3719 temp
= driver_config
->vpath_per_dev
;
3720 if ((driver_config
->vpath_per_dev
== VXGE_USE_DEFAULT
) &&
3721 (max_config_dev
== VXGE_MAX_CONFIG_DEV
)) {
3722 /* No more CPU. Return vpath number as zero.*/
3723 if (driver_config
->g_no_cpus
== -1)
3726 if (!driver_config
->g_no_cpus
)
3727 driver_config
->g_no_cpus
= num_online_cpus();
3729 driver_config
->vpath_per_dev
= driver_config
->g_no_cpus
>> 1;
3730 if (!driver_config
->vpath_per_dev
)
3731 driver_config
->vpath_per_dev
= 1;
3733 for (i
= 0; i
< VXGE_HW_MAX_VIRTUAL_PATHS
; i
++)
3734 if (!vxge_bVALn(vpath_mask
, i
, 1))
3738 if (default_no_vpath
< driver_config
->vpath_per_dev
)
3739 driver_config
->vpath_per_dev
= default_no_vpath
;
3741 driver_config
->g_no_cpus
= driver_config
->g_no_cpus
-
3742 (driver_config
->vpath_per_dev
* 2);
3743 if (driver_config
->g_no_cpus
<= 0)
3744 driver_config
->g_no_cpus
= -1;
3747 if (driver_config
->vpath_per_dev
== 1) {
3748 vxge_debug_ll_config(VXGE_TRACE
,
3749 "%s: Disable tx and rx steering, "
3750 "as single vpath is configured", VXGE_DRIVER_NAME
);
3751 config_param
->rth_steering
= NO_STEERING
;
3752 config_param
->tx_steering_type
= NO_STEERING
;
3753 device_config
->rth_en
= 0;
3756 /* configure bandwidth */
3757 for (i
= 0; i
< VXGE_HW_MAX_VIRTUAL_PATHS
; i
++)
3758 device_config
->vp_config
[i
].min_bandwidth
= bw_percentage
[i
];
3760 for (i
= 0; i
< VXGE_HW_MAX_VIRTUAL_PATHS
; i
++) {
3761 device_config
->vp_config
[i
].vp_id
= i
;
3762 device_config
->vp_config
[i
].mtu
= VXGE_HW_DEFAULT_MTU
;
3763 if (no_of_vpaths
< driver_config
->vpath_per_dev
) {
3764 if (!vxge_bVALn(vpath_mask
, i
, 1)) {
3765 vxge_debug_ll_config(VXGE_TRACE
,
3766 "%s: vpath: %d is not available",
3767 VXGE_DRIVER_NAME
, i
);
3770 vxge_debug_ll_config(VXGE_TRACE
,
3771 "%s: vpath: %d available",
3772 VXGE_DRIVER_NAME
, i
);
3776 vxge_debug_ll_config(VXGE_TRACE
,
3777 "%s: vpath: %d is not configured, "
3778 "max_config_vpath exceeded",
3779 VXGE_DRIVER_NAME
, i
);
3783 /* Configure Tx fifo's */
3784 device_config
->vp_config
[i
].fifo
.enable
=
3785 VXGE_HW_FIFO_ENABLE
;
3786 device_config
->vp_config
[i
].fifo
.max_frags
=
3788 device_config
->vp_config
[i
].fifo
.memblock_size
=
3789 VXGE_HW_MIN_FIFO_MEMBLOCK_SIZE
;
3791 txdl_size
= device_config
->vp_config
[i
].fifo
.max_frags
*
3792 sizeof(struct vxge_hw_fifo_txd
);
3793 txdl_per_memblock
= VXGE_HW_MIN_FIFO_MEMBLOCK_SIZE
/ txdl_size
;
3795 device_config
->vp_config
[i
].fifo
.fifo_blocks
=
3796 ((VXGE_DEF_FIFO_LENGTH
- 1) / txdl_per_memblock
) + 1;
3798 device_config
->vp_config
[i
].fifo
.intr
=
3799 VXGE_HW_FIFO_QUEUE_INTR_DISABLE
;
3801 /* Configure tti properties */
3802 device_config
->vp_config
[i
].tti
.intr_enable
=
3803 VXGE_HW_TIM_INTR_ENABLE
;
3805 device_config
->vp_config
[i
].tti
.btimer_val
=
3806 (VXGE_TTI_BTIMER_VAL
* 1000) / 272;
3808 device_config
->vp_config
[i
].tti
.timer_ac_en
=
3809 VXGE_HW_TIM_TIMER_AC_ENABLE
;
3811 /* For msi-x with napi (each vector has a handler of its own) -
3812 * Set CI to OFF for all vpaths
3814 device_config
->vp_config
[i
].tti
.timer_ci_en
=
3815 VXGE_HW_TIM_TIMER_CI_DISABLE
;
3817 device_config
->vp_config
[i
].tti
.timer_ri_en
=
3818 VXGE_HW_TIM_TIMER_RI_DISABLE
;
3820 device_config
->vp_config
[i
].tti
.util_sel
=
3821 VXGE_HW_TIM_UTIL_SEL_LEGACY_TX_NET_UTIL
;
3823 device_config
->vp_config
[i
].tti
.ltimer_val
=
3824 (VXGE_TTI_LTIMER_VAL
* 1000) / 272;
3826 device_config
->vp_config
[i
].tti
.rtimer_val
=
3827 (VXGE_TTI_RTIMER_VAL
* 1000) / 272;
3829 device_config
->vp_config
[i
].tti
.urange_a
= TTI_TX_URANGE_A
;
3830 device_config
->vp_config
[i
].tti
.urange_b
= TTI_TX_URANGE_B
;
3831 device_config
->vp_config
[i
].tti
.urange_c
= TTI_TX_URANGE_C
;
3832 device_config
->vp_config
[i
].tti
.uec_a
= TTI_TX_UFC_A
;
3833 device_config
->vp_config
[i
].tti
.uec_b
= TTI_TX_UFC_B
;
3834 device_config
->vp_config
[i
].tti
.uec_c
= TTI_TX_UFC_C
;
3835 device_config
->vp_config
[i
].tti
.uec_d
= TTI_TX_UFC_D
;
3837 /* Configure Rx rings */
3838 device_config
->vp_config
[i
].ring
.enable
=
3839 VXGE_HW_RING_ENABLE
;
3841 device_config
->vp_config
[i
].ring
.ring_blocks
=
3842 VXGE_HW_DEF_RING_BLOCKS
;
3844 device_config
->vp_config
[i
].ring
.buffer_mode
=
3845 VXGE_HW_RING_RXD_BUFFER_MODE_1
;
3847 device_config
->vp_config
[i
].ring
.rxds_limit
=
3848 VXGE_HW_DEF_RING_RXDS_LIMIT
;
3850 device_config
->vp_config
[i
].ring
.scatter_mode
=
3851 VXGE_HW_RING_SCATTER_MODE_A
;
3853 /* Configure rti properties */
3854 device_config
->vp_config
[i
].rti
.intr_enable
=
3855 VXGE_HW_TIM_INTR_ENABLE
;
3857 device_config
->vp_config
[i
].rti
.btimer_val
=
3858 (VXGE_RTI_BTIMER_VAL
* 1000)/272;
3860 device_config
->vp_config
[i
].rti
.timer_ac_en
=
3861 VXGE_HW_TIM_TIMER_AC_ENABLE
;
3863 device_config
->vp_config
[i
].rti
.timer_ci_en
=
3864 VXGE_HW_TIM_TIMER_CI_DISABLE
;
3866 device_config
->vp_config
[i
].rti
.timer_ri_en
=
3867 VXGE_HW_TIM_TIMER_RI_DISABLE
;
3869 device_config
->vp_config
[i
].rti
.util_sel
=
3870 VXGE_HW_TIM_UTIL_SEL_LEGACY_RX_NET_UTIL
;
3872 device_config
->vp_config
[i
].rti
.urange_a
=
3874 device_config
->vp_config
[i
].rti
.urange_b
=
3876 device_config
->vp_config
[i
].rti
.urange_c
=
3878 device_config
->vp_config
[i
].rti
.uec_a
= RTI_RX_UFC_A
;
3879 device_config
->vp_config
[i
].rti
.uec_b
= RTI_RX_UFC_B
;
3880 device_config
->vp_config
[i
].rti
.uec_c
= RTI_RX_UFC_C
;
3881 device_config
->vp_config
[i
].rti
.uec_d
= RTI_RX_UFC_D
;
3883 device_config
->vp_config
[i
].rti
.rtimer_val
=
3884 (VXGE_RTI_RTIMER_VAL
* 1000) / 272;
3886 device_config
->vp_config
[i
].rti
.ltimer_val
=
3887 (VXGE_RTI_LTIMER_VAL
* 1000) / 272;
3889 device_config
->vp_config
[i
].rpa_strip_vlan_tag
=
3893 driver_config
->vpath_per_dev
= temp
;
3894 return no_of_vpaths
;
3897 /* initialize device configuratrions */
3898 static void __devinit
vxge_device_config_init(
3899 struct vxge_hw_device_config
*device_config
,
3902 /* Used for CQRQ/SRQ. */
3903 device_config
->dma_blockpool_initial
=
3904 VXGE_HW_INITIAL_DMA_BLOCK_POOL_SIZE
;
3906 device_config
->dma_blockpool_max
=
3907 VXGE_HW_MAX_DMA_BLOCK_POOL_SIZE
;
3909 if (max_mac_vpath
> VXGE_MAX_MAC_ADDR_COUNT
)
3910 max_mac_vpath
= VXGE_MAX_MAC_ADDR_COUNT
;
3912 #ifndef CONFIG_PCI_MSI
3913 vxge_debug_init(VXGE_ERR
,
3914 "%s: This Kernel does not support "
3915 "MSI-X. Defaulting to INTA", VXGE_DRIVER_NAME
);
3919 /* Configure whether MSI-X or IRQL. */
3920 switch (*intr_type
) {
3922 device_config
->intr_mode
= VXGE_HW_INTR_MODE_IRQLINE
;
3926 device_config
->intr_mode
= VXGE_HW_INTR_MODE_MSIX_ONE_SHOT
;
3930 /* Timer period between device poll */
3931 device_config
->device_poll_millis
= VXGE_TIMER_DELAY
;
3933 /* Configure mac based steering. */
3934 device_config
->rts_mac_en
= addr_learn_en
;
3936 /* Configure Vpaths */
3937 device_config
->rth_it_type
= VXGE_HW_RTH_IT_TYPE_MULTI_IT
;
3939 vxge_debug_ll_config(VXGE_TRACE
, "%s : Device Config Params ",
3941 vxge_debug_ll_config(VXGE_TRACE
, "intr_mode : %d",
3942 device_config
->intr_mode
);
3943 vxge_debug_ll_config(VXGE_TRACE
, "device_poll_millis : %d",
3944 device_config
->device_poll_millis
);
3945 vxge_debug_ll_config(VXGE_TRACE
, "rth_en : %d",
3946 device_config
->rth_en
);
3947 vxge_debug_ll_config(VXGE_TRACE
, "rth_it_type : %d",
3948 device_config
->rth_it_type
);
3951 static void __devinit
vxge_print_parm(struct vxgedev
*vdev
, u64 vpath_mask
)
3955 vxge_debug_init(VXGE_TRACE
,
3956 "%s: %d Vpath(s) opened",
3957 vdev
->ndev
->name
, vdev
->no_of_vpath
);
3959 switch (vdev
->config
.intr_type
) {
3961 vxge_debug_init(VXGE_TRACE
,
3962 "%s: Interrupt type INTA", vdev
->ndev
->name
);
3966 vxge_debug_init(VXGE_TRACE
,
3967 "%s: Interrupt type MSI-X", vdev
->ndev
->name
);
3971 if (vdev
->config
.rth_steering
) {
3972 vxge_debug_init(VXGE_TRACE
,
3973 "%s: RTH steering enabled for TCP_IPV4",
3976 vxge_debug_init(VXGE_TRACE
,
3977 "%s: RTH steering disabled", vdev
->ndev
->name
);
3980 switch (vdev
->config
.tx_steering_type
) {
3982 vxge_debug_init(VXGE_TRACE
,
3983 "%s: Tx steering disabled", vdev
->ndev
->name
);
3985 case TX_PRIORITY_STEERING
:
3986 vxge_debug_init(VXGE_TRACE
,
3987 "%s: Unsupported tx steering option",
3989 vxge_debug_init(VXGE_TRACE
,
3990 "%s: Tx steering disabled", vdev
->ndev
->name
);
3991 vdev
->config
.tx_steering_type
= 0;
3993 case TX_VLAN_STEERING
:
3994 vxge_debug_init(VXGE_TRACE
,
3995 "%s: Unsupported tx steering option",
3997 vxge_debug_init(VXGE_TRACE
,
3998 "%s: Tx steering disabled", vdev
->ndev
->name
);
3999 vdev
->config
.tx_steering_type
= 0;
4001 case TX_MULTIQ_STEERING
:
4002 vxge_debug_init(VXGE_TRACE
,
4003 "%s: Tx multiqueue steering enabled",
4006 case TX_PORT_STEERING
:
4007 vxge_debug_init(VXGE_TRACE
,
4008 "%s: Tx port steering enabled",
4012 vxge_debug_init(VXGE_ERR
,
4013 "%s: Unsupported tx steering type",
4015 vxge_debug_init(VXGE_TRACE
,
4016 "%s: Tx steering disabled", vdev
->ndev
->name
);
4017 vdev
->config
.tx_steering_type
= 0;
4020 if (vdev
->config
.addr_learn_en
)
4021 vxge_debug_init(VXGE_TRACE
,
4022 "%s: MAC Address learning enabled", vdev
->ndev
->name
);
4024 for (i
= 0; i
< VXGE_HW_MAX_VIRTUAL_PATHS
; i
++) {
4025 if (!vxge_bVALn(vpath_mask
, i
, 1))
4027 vxge_debug_ll_config(VXGE_TRACE
,
4028 "%s: MTU size - %d", vdev
->ndev
->name
,
4029 ((struct __vxge_hw_device
*)(vdev
->devh
))->
4030 config
.vp_config
[i
].mtu
);
4031 vxge_debug_init(VXGE_TRACE
,
4032 "%s: VLAN tag stripping %s", vdev
->ndev
->name
,
4033 ((struct __vxge_hw_device
*)(vdev
->devh
))->
4034 config
.vp_config
[i
].rpa_strip_vlan_tag
4035 ? "Enabled" : "Disabled");
4036 vxge_debug_ll_config(VXGE_TRACE
,
4037 "%s: Max frags : %d", vdev
->ndev
->name
,
4038 ((struct __vxge_hw_device
*)(vdev
->devh
))->
4039 config
.vp_config
[i
].fifo
.max_frags
);
4046 * vxge_pm_suspend - vxge power management suspend entry point
4049 static int vxge_pm_suspend(struct pci_dev
*pdev
, pm_message_t state
)
4054 * vxge_pm_resume - vxge power management resume entry point
4057 static int vxge_pm_resume(struct pci_dev
*pdev
)
4065 * vxge_io_error_detected - called when PCI error is detected
4066 * @pdev: Pointer to PCI device
4067 * @state: The current pci connection state
4069 * This function is called after a PCI bus error affecting
4070 * this device has been detected.
4072 static pci_ers_result_t
vxge_io_error_detected(struct pci_dev
*pdev
,
4073 pci_channel_state_t state
)
4075 struct __vxge_hw_device
*hldev
= pci_get_drvdata(pdev
);
4076 struct net_device
*netdev
= hldev
->ndev
;
4078 netif_device_detach(netdev
);
4080 if (state
== pci_channel_io_perm_failure
)
4081 return PCI_ERS_RESULT_DISCONNECT
;
4083 if (netif_running(netdev
)) {
4084 /* Bring down the card, while avoiding PCI I/O */
4085 do_vxge_close(netdev
, 0);
4088 pci_disable_device(pdev
);
4090 return PCI_ERS_RESULT_NEED_RESET
;
4094 * vxge_io_slot_reset - called after the pci bus has been reset.
4095 * @pdev: Pointer to PCI device
4097 * Restart the card from scratch, as if from a cold-boot.
4098 * At this point, the card has exprienced a hard reset,
4099 * followed by fixups by BIOS, and has its config space
4100 * set up identically to what it was at cold boot.
4102 static pci_ers_result_t
vxge_io_slot_reset(struct pci_dev
*pdev
)
4104 struct __vxge_hw_device
*hldev
= pci_get_drvdata(pdev
);
4105 struct net_device
*netdev
= hldev
->ndev
;
4107 struct vxgedev
*vdev
= netdev_priv(netdev
);
4109 if (pci_enable_device(pdev
)) {
4110 netdev_err(netdev
, "Cannot re-enable device after reset\n");
4111 return PCI_ERS_RESULT_DISCONNECT
;
4114 pci_set_master(pdev
);
4115 do_vxge_reset(vdev
, VXGE_LL_FULL_RESET
);
4117 return PCI_ERS_RESULT_RECOVERED
;
4121 * vxge_io_resume - called when traffic can start flowing again.
4122 * @pdev: Pointer to PCI device
4124 * This callback is called when the error recovery driver tells
4125 * us that its OK to resume normal operation.
4127 static void vxge_io_resume(struct pci_dev
*pdev
)
4129 struct __vxge_hw_device
*hldev
= pci_get_drvdata(pdev
);
4130 struct net_device
*netdev
= hldev
->ndev
;
4132 if (netif_running(netdev
)) {
4133 if (vxge_open(netdev
)) {
4135 "Can't bring device back up after reset\n");
4140 netif_device_attach(netdev
);
4143 static inline u32
vxge_get_num_vfs(u64 function_mode
)
4145 u32 num_functions
= 0;
4147 switch (function_mode
) {
4148 case VXGE_HW_FUNCTION_MODE_MULTI_FUNCTION
:
4149 case VXGE_HW_FUNCTION_MODE_SRIOV_8
:
4152 case VXGE_HW_FUNCTION_MODE_SINGLE_FUNCTION
:
4155 case VXGE_HW_FUNCTION_MODE_SRIOV
:
4156 case VXGE_HW_FUNCTION_MODE_MRIOV
:
4157 case VXGE_HW_FUNCTION_MODE_MULTI_FUNCTION_17
:
4160 case VXGE_HW_FUNCTION_MODE_SRIOV_4
:
4163 case VXGE_HW_FUNCTION_MODE_MULTI_FUNCTION_2
:
4166 case VXGE_HW_FUNCTION_MODE_MRIOV_8
:
4167 num_functions
= 8; /* TODO */
4170 return num_functions
;
4173 int vxge_fw_upgrade(struct vxgedev
*vdev
, char *fw_name
, int override
)
4175 struct __vxge_hw_device
*hldev
= vdev
->devh
;
4176 u32 maj
, min
, bld
, cmaj
, cmin
, cbld
;
4177 enum vxge_hw_status status
;
4178 const struct firmware
*fw
;
4181 ret
= request_firmware(&fw
, fw_name
, &vdev
->pdev
->dev
);
4183 vxge_debug_init(VXGE_ERR
, "%s: Firmware file '%s' not found",
4184 VXGE_DRIVER_NAME
, fw_name
);
4188 /* Load the new firmware onto the adapter */
4189 status
= vxge_update_fw_image(hldev
, fw
->data
, fw
->size
);
4190 if (status
!= VXGE_HW_OK
) {
4191 vxge_debug_init(VXGE_ERR
,
4192 "%s: FW image download to adapter failed '%s'.",
4193 VXGE_DRIVER_NAME
, fw_name
);
4198 /* Read the version of the new firmware */
4199 status
= vxge_hw_upgrade_read_version(hldev
, &maj
, &min
, &bld
);
4200 if (status
!= VXGE_HW_OK
) {
4201 vxge_debug_init(VXGE_ERR
,
4202 "%s: Upgrade read version failed '%s'.",
4203 VXGE_DRIVER_NAME
, fw_name
);
4208 cmaj
= vdev
->config
.device_hw_info
.fw_version
.major
;
4209 cmin
= vdev
->config
.device_hw_info
.fw_version
.minor
;
4210 cbld
= vdev
->config
.device_hw_info
.fw_version
.build
;
4211 /* It's possible the version in /lib/firmware is not the latest version.
4212 * If so, we could get into a loop of trying to upgrade to the latest
4213 * and flashing the older version.
4215 if (VXGE_FW_VER(maj
, min
, bld
) == VXGE_FW_VER(cmaj
, cmin
, cbld
) &&
4221 printk(KERN_NOTICE
"Upgrade to firmware version %d.%d.%d commencing\n",
4224 /* Flash the adapter with the new firmware */
4225 status
= vxge_hw_flash_fw(hldev
);
4226 if (status
!= VXGE_HW_OK
) {
4227 vxge_debug_init(VXGE_ERR
, "%s: Upgrade commit failed '%s'.",
4228 VXGE_DRIVER_NAME
, fw_name
);
4233 printk(KERN_NOTICE
"Upgrade of firmware successful! Adapter must be "
4234 "hard reset before using, thus requiring a system reboot or a "
4235 "hotplug event.\n");
4238 release_firmware(fw
);
4242 static int vxge_probe_fw_update(struct vxgedev
*vdev
)
4248 maj
= vdev
->config
.device_hw_info
.fw_version
.major
;
4249 min
= vdev
->config
.device_hw_info
.fw_version
.minor
;
4250 bld
= vdev
->config
.device_hw_info
.fw_version
.build
;
4252 if (VXGE_FW_VER(maj
, min
, bld
) == VXGE_CERT_FW_VER
)
4255 /* Ignore the build number when determining if the current firmware is
4256 * "too new" to load the driver
4258 if (VXGE_FW_VER(maj
, min
, 0) > VXGE_CERT_FW_VER
) {
4259 vxge_debug_init(VXGE_ERR
, "%s: Firmware newer than last known "
4260 "version, unable to load driver\n",
4265 /* Firmware 1.4.4 and older cannot be upgraded, and is too ancient to
4266 * work with this driver.
4268 if (VXGE_FW_VER(maj
, min
, bld
) <= VXGE_FW_DEAD_VER
) {
4269 vxge_debug_init(VXGE_ERR
, "%s: Firmware %d.%d.%d cannot be "
4270 "upgraded\n", VXGE_DRIVER_NAME
, maj
, min
, bld
);
4274 /* If file not specified, determine gPXE or not */
4275 if (VXGE_FW_VER(maj
, min
, bld
) >= VXGE_EPROM_FW_VER
) {
4277 for (i
= 0; i
< VXGE_HW_MAX_ROM_IMAGES
; i
++)
4278 if (vdev
->devh
->eprom_versions
[i
]) {
4284 fw_name
= "vxge/X3fw-pxe.ncf";
4286 fw_name
= "vxge/X3fw.ncf";
4288 ret
= vxge_fw_upgrade(vdev
, fw_name
, 0);
4289 /* -EINVAL and -ENOENT are not fatal errors for flashing firmware on
4290 * probe, so ignore them
4292 if (ret
!= -EINVAL
&& ret
!= -ENOENT
)
4297 if (VXGE_FW_VER(VXGE_CERT_FW_VER_MAJOR
, VXGE_CERT_FW_VER_MINOR
, 0) >
4298 VXGE_FW_VER(maj
, min
, 0)) {
4299 vxge_debug_init(VXGE_ERR
, "%s: Firmware %d.%d.%d is too old to"
4300 " be used with this driver.\n"
4301 "Please get the latest version from "
4302 "ftp://ftp.s2io.com/pub/X3100-Drivers/FIRMWARE",
4303 VXGE_DRIVER_NAME
, maj
, min
, bld
);
4310 static int __devinit
is_sriov_initialized(struct pci_dev
*pdev
)
4315 pos
= pci_find_ext_capability(pdev
, PCI_EXT_CAP_ID_SRIOV
);
4317 pci_read_config_word(pdev
, pos
+ PCI_SRIOV_CTRL
, &ctrl
);
4318 if (ctrl
& PCI_SRIOV_CTRL_VFE
)
4326 * @pdev : structure containing the PCI related information of the device.
4327 * @pre: List of PCI devices supported by the driver listed in vxge_id_table.
4329 * This function is called when a new PCI device gets detected and initializes
4332 * returns 0 on success and negative on failure.
4335 static int __devinit
4336 vxge_probe(struct pci_dev
*pdev
, const struct pci_device_id
*pre
)
4338 struct __vxge_hw_device
*hldev
;
4339 enum vxge_hw_status status
;
4343 struct vxgedev
*vdev
;
4344 struct vxge_config
*ll_config
= NULL
;
4345 struct vxge_hw_device_config
*device_config
= NULL
;
4346 struct vxge_hw_device_attr attr
;
4347 int i
, j
, no_of_vpath
= 0, max_vpath_supported
= 0;
4349 struct vxge_mac_addrs
*entry
;
4350 static int bus
= -1, device
= -1;
4353 enum vxge_hw_status is_privileged
;
4357 vxge_debug_entryexit(VXGE_TRACE
, "%s:%d", __func__
, __LINE__
);
4360 /* In SRIOV-17 mode, functions of the same adapter
4361 * can be deployed on different buses
4363 if (((bus
!= pdev
->bus
->number
) || (device
!= PCI_SLOT(pdev
->devfn
))) &&
4367 bus
= pdev
->bus
->number
;
4368 device
= PCI_SLOT(pdev
->devfn
);
4371 if (driver_config
->config_dev_cnt
&&
4372 (driver_config
->config_dev_cnt
!=
4373 driver_config
->total_dev_cnt
))
4374 vxge_debug_init(VXGE_ERR
,
4375 "%s: Configured %d of %d devices",
4377 driver_config
->config_dev_cnt
,
4378 driver_config
->total_dev_cnt
);
4379 driver_config
->config_dev_cnt
= 0;
4380 driver_config
->total_dev_cnt
= 0;
4383 /* Now making the CPU based no of vpath calculation
4384 * applicable for individual functions as well.
4386 driver_config
->g_no_cpus
= 0;
4387 driver_config
->vpath_per_dev
= max_config_vpath
;
4389 driver_config
->total_dev_cnt
++;
4390 if (++driver_config
->config_dev_cnt
> max_config_dev
) {
4395 device_config
= kzalloc(sizeof(struct vxge_hw_device_config
),
4397 if (!device_config
) {
4399 vxge_debug_init(VXGE_ERR
,
4400 "device_config : malloc failed %s %d",
4401 __FILE__
, __LINE__
);
4405 ll_config
= kzalloc(sizeof(struct vxge_config
), GFP_KERNEL
);
4408 vxge_debug_init(VXGE_ERR
,
4409 "device_config : malloc failed %s %d",
4410 __FILE__
, __LINE__
);
4413 ll_config
->tx_steering_type
= TX_MULTIQ_STEERING
;
4414 ll_config
->intr_type
= MSI_X
;
4415 ll_config
->napi_weight
= NEW_NAPI_WEIGHT
;
4416 ll_config
->rth_steering
= RTH_STEERING
;
4418 /* get the default configuration parameters */
4419 vxge_hw_device_config_default_get(device_config
);
4421 /* initialize configuration parameters */
4422 vxge_device_config_init(device_config
, &ll_config
->intr_type
);
4424 ret
= pci_enable_device(pdev
);
4426 vxge_debug_init(VXGE_ERR
,
4427 "%s : can not enable PCI device", __func__
);
4431 if (!pci_set_dma_mask(pdev
, DMA_BIT_MASK(64))) {
4432 vxge_debug_ll_config(VXGE_TRACE
,
4433 "%s : using 64bit DMA", __func__
);
4437 if (pci_set_consistent_dma_mask(pdev
,
4438 DMA_BIT_MASK(64))) {
4439 vxge_debug_init(VXGE_ERR
,
4440 "%s : unable to obtain 64bit DMA for "
4441 "consistent allocations", __func__
);
4445 } else if (!pci_set_dma_mask(pdev
, DMA_BIT_MASK(32))) {
4446 vxge_debug_ll_config(VXGE_TRACE
,
4447 "%s : using 32bit DMA", __func__
);
4453 ret
= pci_request_region(pdev
, 0, VXGE_DRIVER_NAME
);
4455 vxge_debug_init(VXGE_ERR
,
4456 "%s : request regions failed", __func__
);
4460 pci_set_master(pdev
);
4462 attr
.bar0
= pci_ioremap_bar(pdev
, 0);
4464 vxge_debug_init(VXGE_ERR
,
4465 "%s : cannot remap io memory bar0", __func__
);
4469 vxge_debug_ll_config(VXGE_TRACE
,
4470 "pci ioremap bar0: %p:0x%llx",
4472 (unsigned long long)pci_resource_start(pdev
, 0));
4474 status
= vxge_hw_device_hw_info_get(attr
.bar0
,
4475 &ll_config
->device_hw_info
);
4476 if (status
!= VXGE_HW_OK
) {
4477 vxge_debug_init(VXGE_ERR
,
4478 "%s: Reading of hardware info failed."
4479 "Please try upgrading the firmware.", VXGE_DRIVER_NAME
);
4484 vpath_mask
= ll_config
->device_hw_info
.vpath_mask
;
4485 if (vpath_mask
== 0) {
4486 vxge_debug_ll_config(VXGE_TRACE
,
4487 "%s: No vpaths available in device", VXGE_DRIVER_NAME
);
4492 vxge_debug_ll_config(VXGE_TRACE
,
4493 "%s:%d Vpath mask = %llx", __func__
, __LINE__
,
4494 (unsigned long long)vpath_mask
);
4496 function_mode
= ll_config
->device_hw_info
.function_mode
;
4497 host_type
= ll_config
->device_hw_info
.host_type
;
4498 is_privileged
= __vxge_hw_device_is_privilaged(host_type
,
4499 ll_config
->device_hw_info
.func_id
);
4501 /* Check how many vpaths are available */
4502 for (i
= 0; i
< VXGE_HW_MAX_VIRTUAL_PATHS
; i
++) {
4503 if (!((vpath_mask
) & vxge_mBIT(i
)))
4505 max_vpath_supported
++;
4509 num_vfs
= vxge_get_num_vfs(function_mode
) - 1;
4511 /* Enable SRIOV mode, if firmware has SRIOV support and if it is a PF */
4512 if (is_sriov(function_mode
) && !is_sriov_initialized(pdev
) &&
4513 (ll_config
->intr_type
!= INTA
)) {
4514 ret
= pci_enable_sriov(pdev
, num_vfs
);
4516 vxge_debug_ll_config(VXGE_ERR
,
4517 "Failed in enabling SRIOV mode: %d\n", ret
);
4518 /* No need to fail out, as an error here is non-fatal */
4522 * Configure vpaths and get driver configured number of vpaths
4523 * which is less than or equal to the maximum vpaths per function.
4525 no_of_vpath
= vxge_config_vpaths(device_config
, vpath_mask
, ll_config
);
4527 vxge_debug_ll_config(VXGE_ERR
,
4528 "%s: No more vpaths to configure", VXGE_DRIVER_NAME
);
4533 /* Setting driver callbacks */
4534 attr
.uld_callbacks
.link_up
= vxge_callback_link_up
;
4535 attr
.uld_callbacks
.link_down
= vxge_callback_link_down
;
4536 attr
.uld_callbacks
.crit_err
= vxge_callback_crit_err
;
4538 status
= vxge_hw_device_initialize(&hldev
, &attr
, device_config
);
4539 if (status
!= VXGE_HW_OK
) {
4540 vxge_debug_init(VXGE_ERR
,
4541 "Failed to initialize device (%d)", status
);
4546 if (VXGE_FW_VER(ll_config
->device_hw_info
.fw_version
.major
,
4547 ll_config
->device_hw_info
.fw_version
.minor
,
4548 ll_config
->device_hw_info
.fw_version
.build
) >=
4549 VXGE_EPROM_FW_VER
) {
4550 struct eprom_image img
[VXGE_HW_MAX_ROM_IMAGES
];
4552 status
= vxge_hw_vpath_eprom_img_ver_get(hldev
, img
);
4553 if (status
!= VXGE_HW_OK
) {
4554 vxge_debug_init(VXGE_ERR
, "%s: Reading of EPROM failed",
4556 /* This is a non-fatal error, continue */
4559 for (i
= 0; i
< VXGE_HW_MAX_ROM_IMAGES
; i
++) {
4560 hldev
->eprom_versions
[i
] = img
[i
].version
;
4561 if (!img
[i
].is_valid
)
4563 vxge_debug_init(VXGE_TRACE
, "%s: EPROM %d, version "
4564 "%d.%d.%d.%d", VXGE_DRIVER_NAME
, i
,
4565 VXGE_EPROM_IMG_MAJOR(img
[i
].version
),
4566 VXGE_EPROM_IMG_MINOR(img
[i
].version
),
4567 VXGE_EPROM_IMG_FIX(img
[i
].version
),
4568 VXGE_EPROM_IMG_BUILD(img
[i
].version
));
4572 /* if FCS stripping is not disabled in MAC fail driver load */
4573 status
= vxge_hw_vpath_strip_fcs_check(hldev
, vpath_mask
);
4574 if (status
!= VXGE_HW_OK
) {
4575 vxge_debug_init(VXGE_ERR
, "%s: FCS stripping is enabled in MAC"
4576 " failing driver load", VXGE_DRIVER_NAME
);
4581 /* Always enable HWTS. This will always cause the FCS to be invalid,
4582 * due to the fact that HWTS is using the FCS as the location of the
4583 * timestamp. The HW FCS checking will still correctly determine if
4584 * there is a valid checksum, and the FCS is being removed by the driver
4585 * anyway. So no fucntionality is being lost. Since it is always
4586 * enabled, we now simply use the ioctl call to set whether or not the
4587 * driver should be paying attention to the HWTS.
4589 if (is_privileged
== VXGE_HW_OK
) {
4590 status
= vxge_timestamp_config(hldev
);
4591 if (status
!= VXGE_HW_OK
) {
4592 vxge_debug_init(VXGE_ERR
, "%s: HWTS enable failed",
4599 vxge_hw_device_debug_set(hldev
, VXGE_ERR
, VXGE_COMPONENT_LL
);
4601 /* set private device info */
4602 pci_set_drvdata(pdev
, hldev
);
4604 ll_config
->fifo_indicate_max_pkts
= VXGE_FIFO_INDICATE_MAX_PKTS
;
4605 ll_config
->addr_learn_en
= addr_learn_en
;
4606 ll_config
->rth_algorithm
= RTH_ALG_JENKINS
;
4607 ll_config
->rth_hash_type_tcpipv4
= 1;
4608 ll_config
->rth_hash_type_ipv4
= 0;
4609 ll_config
->rth_hash_type_tcpipv6
= 0;
4610 ll_config
->rth_hash_type_ipv6
= 0;
4611 ll_config
->rth_hash_type_tcpipv6ex
= 0;
4612 ll_config
->rth_hash_type_ipv6ex
= 0;
4613 ll_config
->rth_bkt_sz
= RTH_BUCKET_SIZE
;
4614 ll_config
->tx_pause_enable
= VXGE_PAUSE_CTRL_ENABLE
;
4615 ll_config
->rx_pause_enable
= VXGE_PAUSE_CTRL_ENABLE
;
4617 ret
= vxge_device_register(hldev
, ll_config
, high_dma
, no_of_vpath
,
4624 ret
= vxge_probe_fw_update(vdev
);
4628 vxge_hw_device_debug_set(hldev
, VXGE_TRACE
, VXGE_COMPONENT_LL
);
4629 VXGE_COPY_DEBUG_INFO_TO_LL(vdev
, vxge_hw_device_error_level_get(hldev
),
4630 vxge_hw_device_trace_level_get(hldev
));
4632 /* set private HW device info */
4633 vdev
->mtu
= VXGE_HW_DEFAULT_MTU
;
4634 vdev
->bar0
= attr
.bar0
;
4635 vdev
->max_vpath_supported
= max_vpath_supported
;
4636 vdev
->no_of_vpath
= no_of_vpath
;
4638 /* Virtual Path count */
4639 for (i
= 0, j
= 0; i
< VXGE_HW_MAX_VIRTUAL_PATHS
; i
++) {
4640 if (!vxge_bVALn(vpath_mask
, i
, 1))
4642 if (j
>= vdev
->no_of_vpath
)
4645 vdev
->vpaths
[j
].is_configured
= 1;
4646 vdev
->vpaths
[j
].device_id
= i
;
4647 vdev
->vpaths
[j
].ring
.driver_id
= j
;
4648 vdev
->vpaths
[j
].vdev
= vdev
;
4649 vdev
->vpaths
[j
].max_mac_addr_cnt
= max_mac_vpath
;
4650 memcpy((u8
*)vdev
->vpaths
[j
].macaddr
,
4651 ll_config
->device_hw_info
.mac_addrs
[i
],
4654 /* Initialize the mac address list header */
4655 INIT_LIST_HEAD(&vdev
->vpaths
[j
].mac_addr_list
);
4657 vdev
->vpaths
[j
].mac_addr_cnt
= 0;
4658 vdev
->vpaths
[j
].mcast_addr_cnt
= 0;
4661 vdev
->exec_mode
= VXGE_EXEC_MODE_DISABLE
;
4662 vdev
->max_config_port
= max_config_port
;
4664 vdev
->vlan_tag_strip
= vlan_tag_strip
;
4666 /* map the hashing selector table to the configured vpaths */
4667 for (i
= 0; i
< vdev
->no_of_vpath
; i
++)
4668 vdev
->vpath_selector
[i
] = vpath_selector
[i
];
4670 macaddr
= (u8
*)vdev
->vpaths
[0].macaddr
;
4672 ll_config
->device_hw_info
.serial_number
[VXGE_HW_INFO_LEN
- 1] = '\0';
4673 ll_config
->device_hw_info
.product_desc
[VXGE_HW_INFO_LEN
- 1] = '\0';
4674 ll_config
->device_hw_info
.part_number
[VXGE_HW_INFO_LEN
- 1] = '\0';
4676 vxge_debug_init(VXGE_TRACE
, "%s: SERIAL NUMBER: %s",
4677 vdev
->ndev
->name
, ll_config
->device_hw_info
.serial_number
);
4679 vxge_debug_init(VXGE_TRACE
, "%s: PART NUMBER: %s",
4680 vdev
->ndev
->name
, ll_config
->device_hw_info
.part_number
);
4682 vxge_debug_init(VXGE_TRACE
, "%s: Neterion %s Server Adapter",
4683 vdev
->ndev
->name
, ll_config
->device_hw_info
.product_desc
);
4685 vxge_debug_init(VXGE_TRACE
, "%s: MAC ADDR: %pM",
4686 vdev
->ndev
->name
, macaddr
);
4688 vxge_debug_init(VXGE_TRACE
, "%s: Link Width x%d",
4689 vdev
->ndev
->name
, vxge_hw_device_link_width_get(hldev
));
4691 vxge_debug_init(VXGE_TRACE
,
4692 "%s: Firmware version : %s Date : %s", vdev
->ndev
->name
,
4693 ll_config
->device_hw_info
.fw_version
.version
,
4694 ll_config
->device_hw_info
.fw_date
.date
);
4697 switch (ll_config
->device_hw_info
.function_mode
) {
4698 case VXGE_HW_FUNCTION_MODE_SINGLE_FUNCTION
:
4699 vxge_debug_init(VXGE_TRACE
,
4700 "%s: Single Function Mode Enabled", vdev
->ndev
->name
);
4702 case VXGE_HW_FUNCTION_MODE_MULTI_FUNCTION
:
4703 vxge_debug_init(VXGE_TRACE
,
4704 "%s: Multi Function Mode Enabled", vdev
->ndev
->name
);
4706 case VXGE_HW_FUNCTION_MODE_SRIOV
:
4707 vxge_debug_init(VXGE_TRACE
,
4708 "%s: Single Root IOV Mode Enabled", vdev
->ndev
->name
);
4710 case VXGE_HW_FUNCTION_MODE_MRIOV
:
4711 vxge_debug_init(VXGE_TRACE
,
4712 "%s: Multi Root IOV Mode Enabled", vdev
->ndev
->name
);
4717 vxge_print_parm(vdev
, vpath_mask
);
4719 /* Store the fw version for ethttool option */
4720 strcpy(vdev
->fw_version
, ll_config
->device_hw_info
.fw_version
.version
);
4721 memcpy(vdev
->ndev
->dev_addr
, (u8
*)vdev
->vpaths
[0].macaddr
, ETH_ALEN
);
4722 memcpy(vdev
->ndev
->perm_addr
, vdev
->ndev
->dev_addr
, ETH_ALEN
);
4724 /* Copy the station mac address to the list */
4725 for (i
= 0; i
< vdev
->no_of_vpath
; i
++) {
4726 entry
= kzalloc(sizeof(struct vxge_mac_addrs
), GFP_KERNEL
);
4727 if (NULL
== entry
) {
4728 vxge_debug_init(VXGE_ERR
,
4729 "%s: mac_addr_list : memory allocation failed",
4734 macaddr
= (u8
*)&entry
->macaddr
;
4735 memcpy(macaddr
, vdev
->ndev
->dev_addr
, ETH_ALEN
);
4736 list_add(&entry
->item
, &vdev
->vpaths
[i
].mac_addr_list
);
4737 vdev
->vpaths
[i
].mac_addr_cnt
= 1;
4740 kfree(device_config
);
4743 * INTA is shared in multi-function mode. This is unlike the INTA
4744 * implementation in MR mode, where each VH has its own INTA message.
4745 * - INTA is masked (disabled) as long as at least one function sets
4746 * its TITAN_MASK_ALL_INT.ALARM bit.
4747 * - INTA is unmasked (enabled) when all enabled functions have cleared
4748 * their own TITAN_MASK_ALL_INT.ALARM bit.
4749 * The TITAN_MASK_ALL_INT ALARM & TRAFFIC bits are cleared on power up.
4750 * Though this driver leaves the top level interrupts unmasked while
4751 * leaving the required module interrupt bits masked on exit, there
4752 * could be a rougue driver around that does not follow this procedure
4753 * resulting in a failure to generate interrupts. The following code is
4754 * present to prevent such a failure.
4757 if (ll_config
->device_hw_info
.function_mode
==
4758 VXGE_HW_FUNCTION_MODE_MULTI_FUNCTION
)
4759 if (vdev
->config
.intr_type
== INTA
)
4760 vxge_hw_device_unmask_all(hldev
);
4762 vxge_debug_entryexit(VXGE_TRACE
, "%s: %s:%d Exiting...",
4763 vdev
->ndev
->name
, __func__
, __LINE__
);
4765 vxge_hw_device_debug_set(hldev
, VXGE_ERR
, VXGE_COMPONENT_LL
);
4766 VXGE_COPY_DEBUG_INFO_TO_LL(vdev
, vxge_hw_device_error_level_get(hldev
),
4767 vxge_hw_device_trace_level_get(hldev
));
4773 for (i
= 0; i
< vdev
->no_of_vpath
; i
++)
4774 vxge_free_mac_add_list(&vdev
->vpaths
[i
]);
4776 vxge_device_unregister(hldev
);
4778 pci_set_drvdata(pdev
, NULL
);
4779 vxge_hw_device_terminate(hldev
);
4780 pci_disable_sriov(pdev
);
4784 pci_release_region(pdev
, 0);
4786 pci_disable_device(pdev
);
4789 kfree(device_config
);
4790 driver_config
->config_dev_cnt
--;
4791 driver_config
->total_dev_cnt
--;
4796 * vxge_rem_nic - Free the PCI device
4797 * @pdev: structure containing the PCI related information of the device.
4798 * Description: This function is called by the Pci subsystem to release a
4799 * PCI device and free up all resource held up by the device.
4801 static void __devexit
vxge_remove(struct pci_dev
*pdev
)
4803 struct __vxge_hw_device
*hldev
;
4804 struct vxgedev
*vdev
;
4807 hldev
= pci_get_drvdata(pdev
);
4811 vdev
= netdev_priv(hldev
->ndev
);
4813 vxge_debug_entryexit(vdev
->level_trace
, "%s:%d", __func__
, __LINE__
);
4814 vxge_debug_init(vdev
->level_trace
, "%s : removing PCI device...",
4817 for (i
= 0; i
< vdev
->no_of_vpath
; i
++)
4818 vxge_free_mac_add_list(&vdev
->vpaths
[i
]);
4820 vxge_device_unregister(hldev
);
4821 pci_set_drvdata(pdev
, NULL
);
4822 /* Do not call pci_disable_sriov here, as it will break child devices */
4823 vxge_hw_device_terminate(hldev
);
4824 iounmap(vdev
->bar0
);
4825 pci_release_region(pdev
, 0);
4826 pci_disable_device(pdev
);
4827 driver_config
->config_dev_cnt
--;
4828 driver_config
->total_dev_cnt
--;
4830 vxge_debug_init(vdev
->level_trace
, "%s:%d Device unregistered",
4831 __func__
, __LINE__
);
4832 vxge_debug_entryexit(vdev
->level_trace
, "%s:%d Exiting...", __func__
,
4836 static struct pci_error_handlers vxge_err_handler
= {
4837 .error_detected
= vxge_io_error_detected
,
4838 .slot_reset
= vxge_io_slot_reset
,
4839 .resume
= vxge_io_resume
,
4842 static struct pci_driver vxge_driver
= {
4843 .name
= VXGE_DRIVER_NAME
,
4844 .id_table
= vxge_id_table
,
4845 .probe
= vxge_probe
,
4846 .remove
= __devexit_p(vxge_remove
),
4848 .suspend
= vxge_pm_suspend
,
4849 .resume
= vxge_pm_resume
,
4851 .err_handler
= &vxge_err_handler
,
4859 pr_info("Copyright(c) 2002-2010 Exar Corp.\n");
4860 pr_info("Driver version: %s\n", DRV_VERSION
);
4864 driver_config
= kzalloc(sizeof(struct vxge_drv_config
), GFP_KERNEL
);
4868 ret
= pci_register_driver(&vxge_driver
);
4870 kfree(driver_config
);
4874 if (driver_config
->config_dev_cnt
&&
4875 (driver_config
->config_dev_cnt
!= driver_config
->total_dev_cnt
))
4876 vxge_debug_init(VXGE_ERR
,
4877 "%s: Configured %d of %d devices",
4878 VXGE_DRIVER_NAME
, driver_config
->config_dev_cnt
,
4879 driver_config
->total_dev_cnt
);
4887 pci_unregister_driver(&vxge_driver
);
4888 kfree(driver_config
);
4890 module_init(vxge_starter
);
4891 module_exit(vxge_closer
);